Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

3D silicon doped hydroxyapatite scaffolds decorated with Elastin-like Recombinamers for bone regenerative medicine

  • Vila, Mercedes
  • García, Ana
  • Girotti ., Alessandra
  • Alonso Rodrigo, Matilde
  • Rodríguez Cabello, José Carlos
  • González Vázquez, Arlyng
  • Planell i Estany, Josep A.
  • Engel López, Elisabeth
  • Buján Varela, Julia
  • García Honduvilla, Natalio
  • Vallet Regí, María
Producción Científica, The current study reports on the manufacturing by rapid prototyping technique of three-dimensional (3D) scaffolds based on silicon substituted hydroxyapatite with Elastin-like Recombinamers (ELRs) func- tionalized surfaces. Silicon doped hydroxyapatite (Si-HA), with Ca10(PO4)5.7(SiO4)0.3(OH)1.7h0.3 nominal formula, was surface functionalized with two different types of polymers designed by genetic engineer- ing: ELR-RGD that contain cell attachment specific sequences and ELR-SNA15/RGD with both hydroxya- patite and cells domains that interact with the inorganic phase and with the cells, respectively. These hybrid materials were subjected to in vitro assays in order to clarify if the ELRs coating improved the well-known biocompatible and bone regeneration properties of calcium phosphates materials. The in vitro tests showed that there was a total and homogeneous colonization of the 3D scaffolds by Bone marrow Mesenchymal Stromal Cells (BMSCs). In addition, the BMSCs were viable and able to proliferate and differentiate into osteoblasts., Ministerio de Industria, Economía y Competitividad (proyectos MAT2013-42473-R y MAT2013-41723-R), Ministerio de Ciencia e Innovación (proyectos MAT2012-35556 y MAT2009-14195-C03-02), Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA244U13), Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA313U14)
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Hybrid elastin-like recombinamer-fibrin gels: physical characterization and in vitro evaluation for cardiovascular tissue engineering applications

  • González de Torre, Israel
  • Weber, Miriam T.
  • Quintanilla Sierra, Luis
  • Alonso Rodrigo, Matilde
  • Jockenhoevel, Stefan
  • Rodríguez Cabello, José Carlos
  • Mela, Petra
Producción Científica, In the field of tissue engineering, the properties of the scaffolds are of crucial importance for the success of the application. Hybrid materials combine the properties of the different components that constitute them. In this study hybrid gels of Elastin-Like Recombinamer (ELR) and fibrin were prepared with a range of polymer concentrations and ELR-to-fibrin ratios. The correlation between SEM micrographs, porosities, swelling ratios and rheological properties was discussed and a poroelastic mechanism was suggested to explain the mechanical behavior of the hybrid gels. Applicability as scaffold materials for cardiovascular tissue engineering was shown by the realization of cell-laden matrixes which supported the synthesis of collagens as revealed by immunohistochemical analysis. As a proof of concept, a tissue-engineered heart valve was fabricated by injection moulding and cultivated in a bioreactor for 3 weeks under dynamic con- ditions. Tissue analysis revealed the production of collagen I and III, fundamental proteins for cardio- vascular constructs., Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA152A12-2, VA244U13 y VA155A12-2), Ministerio de Industria, Economía y Competitividad (proyectos MAT-2010-15982, MAT2010- 15310, PRI-PIBAR-2011-1403 y MAT2012-38043-C02-01)
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Formation of calcium phosphate nanostructures under the influence of self-assembling hybrid elastin-like-statherin recombinamers

  • Hamed Misbah, Mohamed
  • Espanol, M.
  • Quintanilla Sierra, Luis
  • Ginebra, M. P.
  • Rodríguez Cabello, José Carlos
Producción Científica, The self-assembling properties of thermally-sensitive amphiphilic elastin-like multiblock recombinamers have been combined with the capacities of calcium phosphate binding of the SNA15 epitope inspired by the salivary protein statherin. In this regard, the interaction between calcium and phosphate ions was examined in the presence of two hybrid recombinamers. The first recombinamer comprised a simple amphiphilic diblock in which the SNA15 epitopes were combined, at the gene level, to the hydrophilic end. This recombinamer can self-assemble into nanoparticles that can control the transformation of amorphous calcium phosphate (ACP) into a fibre-like hydroxyapatite structure. In the other recombinamer, the SNA15 domains are distributed along the monomer chain, with the hydrophilic blocks being distributed amongst the hydrophobic ones. In this case, the resulting nanohybrid ACP/ recombinamer organises into neuron-like structures. Thus, combining the amphiphilic elastin-like recombinamers to the SNA15 functionality is a powerful mean to tune the formation of different complex calcium phosphate nanostructures, Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA244U13)
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Chitosan-recombinamer layer-by-layer coatings for multifunctional implants

  • Govindharajulu, Jeevan Prasaad
  • Rodríguez Cabello, José Carlos
  • Battacharya, Mrinal
  • Aparicio, Conrado
Producción Científica, The main clinical problems for dental implants are (1) formation of biofilm around the implant—a condition known as peri-implantitis and (2) inadequate bone formation around the implant—lack of osseointegration. Therefore, developing an implant to overcome these problems is of significant interest to the dental community. Chitosan has been reported to have good biocompatibility and anti-bacterial activity. An osseo-inductive recombinant elastin-like biopolymer (P-HAP), that contains a peptide derived from the protein statherin, has been reported to induce biomineralization and osteoblast differentiation. In this study, chitosan/P-HAP bi-layers were built on a titanium surface using a layer-by-layer (LbL) assembly technique. The difference in the water contact angle between consecutive layers, the representative peaks in diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), X-ray photoelectron spectroscopy (XPS), and the changes in the topography between surfaces with a different number of bi-layers observed using atomic force microscopy (AFM), all indicated the successful establishment of chitosan/P-HAP LbL assembly on the titanium surface. The LbL-modified surfaces showed increased biomineralization, an appropriate mouse pre-osteoblastic cell response, and significant anti-bacterial activity against Streptococcus gordonii, a primary colonizer of tissues in the oral environment, Ministerio de Economía, Industria y Competitividad (Project MAT2013-42473-R and MAT2015-68901R), Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA244U13, VA313U14 and VA015U16)
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Human adipose derived stem cells are superior to human osteoblasts (HOB) in bone tissue engineering on a collagen-fibroin-ELR blend

  • Sayin, Esen
  • Hama Rashid, Rosti
  • Rodríguez Cabello, José Carlos
  • Elsheikh Erkan, Ahmed
  • Türker Baran, Erkan
  • Hasirci, Vasif
Producción Científica, The ultrastructure of the bone provides a unique mechanical strength against compressive, torsional and tensional stresses. An elastin-like recombinamer (ELR) with a nucleation sequence for hydroxyapatite was incorporated into films prepared from a collagen – silk fibroin blend carrying microchannel patterns to stimulate anisotropic osteogenesis. SEM and fluorescence microscopy showed the alignment of adipose-derived stem cells (ADSCs) and the human osteoblasts (HOBs) on the ridges and in the grooves of microchannel patterned collagen-fibroin-ELR blend films. The Young's modulus and the ultimate tensile strength (UTS) of untreated films were 0.58 ± 0.13 MPa and 0.18 ± 0.05 MPa, respectively. After 28 days of cell culture, ADSC seeded film had a Young's modulus of 1.21 ± 0.42 MPa and UTS of 0.32 ± 0.15 MPa which were about 3 fold higher than HOB seeded films. The difference in Young's modulus was statistically significant (p: 0.02). ADSCs attached, proliferated and mineralized better than the HOBs. In the light of these results, ADSCs served as a better cell source than HOBs for bone tissue engineering of collagen-fibroin-ELR based constructs used in this study. We have thus shown the enhancement in the tensile mechanical properties of the bone tissue engineered scaffolds by using ADSCs., Ministerio de Economía, Industria y Competitividad (Project MAT2013-42473-R and MAT2015-68901R), Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. (VA244U13, VA313U14 and VA015U16)
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Recombinant DNA technology and click chemistry: a powerful combination for generating a hybrid elastin-like-statherin hydrogel to control calcium phosphate mineralization

  • Hamed Misbah, Mohamed
  • Santos García, María Mercedes
  • Quintanilla Sierra, Luis
  • Günter, Christina
  • Alonso Rodrigo, Matilde
  • Taubert, Andreas
  • Rodríguez Cabello, José Carlos
Producción Científica, Understanding the mechanisms responsible for generating different phases and morphologies of calcium phosphate by elastin-like recombinamers is supreme for bioengineering of advanced multifunctional materials. The generation of such multifunctional hybrid materials depends on the properties of their counterparts and the way in which they are assembled. The success of this assembly depends on the different approaches used, such as recombinant DNA technology and click chemistry. In the present work, an elastin-like recombinamer bearing lysine amino acids distributed along the recombinamer chain has been cross-linked via Huisgen [2 + 3] cycloaddition. The recombinamer contains the SNA15 peptide domains inspired by salivary statherin, a peptide epitope known to specifically bind to and nucleate calcium phosphate. The benefit of using click chemistry is that the hybrid elastin-like-statherin recombinamers cross-link without losing their fibrillar structure. Mineralization of the resulting hybrid elastin-like-statherin recombinamer hydrogels with calcium phosphate is described. Thus, two different hydroxyapatite morphologies (cauliflower- and plate-like) have been formed. Overall, this study shows that crosslinking elastin-like recombinamers leads to interesting matrix materials for the generation of calcium phosphate composites with potential applications as biomaterials., Ministerio de Economía, Industria y Competitividad (Project MAT2013- 42473-R and MAT2013-41723-R), Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA244U13, VA313U14 and GRS/516/A/10)
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Regeneration of hyaline cartilage promoted by xenogeneic mesenchymal stromal cells embedded within elastin-like recombinamer-based bioactive hydrogels

  • Pescador, David
  • Ibáñez Fonseca, Arturo
  • Sánchez Guijo, Fermín
  • G. Briñón, Jesús
  • Arias Vallejo, Francisco Javier
  • Muntión, Sandra
  • Hernández, Cristina
  • Girotti ., Alessandra
  • Alonso Rodrigo, Matilde
  • Cañizo, María Consuelo del
  • Rodríguez Cabello, José Carlos
  • Blanco, Juan Francisco
Producción Científica, Over the last decades, novel therapeutic tools for osteochondral regeneration have arisen from the combination of mesenchymal stromal cells (MSCs) and highly specialized smart biomaterials, such as hydrogel-forming elastin-like recombinamers (ELRs), which could serve as cell-carriers. Herein, we evaluate the delivery of xenogeneic human MSCs (hMSCs) within an injectable ELR-based hydrogel carrier for osteochondral regeneration in rabbits. First, a critical-size osteochondral defect was created in the femora of the animals and subsequently filled with the ELR-based hydrogel alone or with embedded hMSCs. Regeneration outcomes were evaluated after three months by gross assessment, magnetic resonance imaging and computed tomography, showing complete filling of the defect and the de novo formation of hyaline-like cartilage and subchondral bone in the hMSC-treated knees. Furthermore, histological sectioning and staining of every sample confirmed regeneration of the full cartilage thickness and early subchondral bone repair, which was more similar to the native cartilage in the case of the cell-loaded ELR-based hydrogel. Overall histological differences between the two groups were assessed semi-quantitatively using the Wakitani scale and found to be statistically significant (p < 0.05). Immunofluorescence against a human mitochondrial antibody three months post-implantation showed that the hMSCs were integrated into the de novo formed tissue, thus suggesting their ability to overcome the interspecies barrier. Hence, we conclude that the use of xenogeneic MSCs embedded in an ELR-based hydrogel leads to the successful regeneration of hyaline cartilage in osteochondral lesions., Ministerio de Economía, Industria y Competitividad (Project (MAT2016-78903-R, MAT2016-9 79435-R, MAT2013-42473-R, MAT2013-41723-R and MAT2012-38043), Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA244U13, VA313U14 and GRS/516/A/10)
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Intrafibrillar Mineralization of Self-Assembled Elastin-Like Recombinamer Fibrils

  • Li, Yuping
  • Rodríguez Cabello, José Carlos
  • Aparicio, Conrado
Producción Científica, Biomineralization of bone, a controlled process where hydroxyapatite nanocrystals preferentially deposit in collagen fibrils, is achieved by the interplay of the collagen matrix and noncollagenous proteins. Mimicking intrafibrillar mineralization in synthetic systems is highly attractive for the development of advanced hybrid materials with elaborated morphologies and outstanding mechanical properties, as well as understanding the mechanisms of biomineralization. Inspired by nature, intrafibrillar mineralization of collagen fibrils has been successfully replicated in vitro via biomimetic systems, where acidic polymeric additives are used as analogue of noncollagenous proteins in mediating mineralization. The development of synthetic templates that mimic the structure and functions of collagenous matrix in mineralization has yet to be explored. In this study, we demonstrated that self-assembled fibrils of elastin-like recombinamers (ELRs) can induce intrafibrillar mineralization. The ELRs displayed a disordered structure at low temperature but self-assembled into nanofibrils above its inverse transition temperature. In the presence of the self-assembled ELR fibrils, polyaspartate-stabilized amorphous calcium phosphates preferentially infiltrated into the fibrils and then crystallized into hydroxyapatite nanocrystals with their [001] axes aligned parallel to the long axis of the ELR fibril. As the recombinant technology enables designing and producing well-defined ELRs, their molecular and structural properties can be fine-tuned. By examining the ultrastructure of the self-assembled ELRs fibrils as well as their mineralization, we concluded that the spatial confinement formed by a continuum β-spiral structure in an unperturbed fibrillar structure rather than electrostatic interactions or bioactive sequences in the recombinamer composition played the crucial role in inducing intrafibrillar mineralization., 2018-08-01, Ministerio de Economía, Industria y Competitividad (Project MAT2013-42473-R and MAT2015-68901R), Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA244U13, VA313U14 and VA015U16)
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Elastin-like-recombinamers multilayered nanofibrous scaffolds for cardiovascular applications

  • Putzu, M.
  • González de Torre, Israel
  • Rodríguez Cabello, José Carlos
  • Causa, F.
  • Netti, P.A.
Producción Científica, Coronary angioplasty is the most widely used technique for removing atherosclerotic plaques in blood vessels. The regeneration of the damaged intima layer after this treatment is still one of the major challenges in the field of cardiovascular tissue engineering. Different polymers have been used in scaffold manufacturing in order to improve tissue regeneration. Elastin-mimetic polymers are a new class of molecules that have been synthesized and used to obtain small diameter fibers with specific morphological characteristics. Elastin-like polymers produced by recombinant techniques and called elastin-like recombinamers (ELRs) are particularly promising due to their high degree of functionalization. Generally speaking, ELRs can show more complex molecular designs and a tighter control of their sequence than other chemically synthetized polymers Rodriguez Cabello et al (2009 Polymer 50 5159–69, 2011 Nanomedicine 6 111–22). For the fabrication of small diameter fibers, different ELRs were dissolved in 2,2,2-fluoroethanol (TFE). Dynamic light scattering was used to identify the transition temperature and get a deep characterization of the transition behavior of the recombinamers. In this work, we describe the use of electrospinning technique for the manufacturing of an elastic fibrous scaffold; the obtained fibers were characterized and their cytocompatibility was tested in vitro. A thorough study of the influence of voltage, flow rate and distance was carried out in order to determine the appropriate parameters to obtain fibrous mats without beads and defects. Moreover, using a rotating mandrel, we fabricated a tubular scaffold in which ELRs containing different cell adhesion sequences (mainly REDV and RGD) were collected. The stability of the scaffold was improved by using genipin as a crosslinking agent. Genipin-ELRs crosslinked scaffolds show a good stability and fiber morphology. Human umbilical vein endothelial cells were used to assess the in vitro bioactivity of the cell adhesion domains within the backbone of the ELRs., 2018-08-01
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Silk-ELR co-recombinamer covered stents obtained by electrospinning

  • Putzu, M.
  • Causa, F.
  • Parente, Manuel
  • González de Torre, Israel
  • Rodríguez Cabello, José Carlos
  • Netti, P.A.
Producción Científica, In the field of tissue engineering the choice of materials is of great importance given the possibility to use biocompatible polymers produced by means of biotechnology. A large number of synthetic and natural materials have been used to this purpose and processed into scaffolds using Electrospinning technique. Among materials that could be used for the fabrication of scaffold and degradable membranes, natural polymers such as collagen, elastin or fibroin offer the possibility to design structures strictly similar to the extracellular matrix (ECM). Biotechnology and genetic engineering made possible the advent of a new class of biopolymers called protein-based polymers. One example is represented by the silk-elastin-proteins that combine the elasticity and resilience of elastin with the high tensile strength of silk-fibroin and display engineered bioactive sequences. In this work, we use electrospinning technique to produce a fibrous scaffold made of the corecombinamer Silk-ELR. Obtained fibres have been characterized from the morphological point of view. Homogeneity and morphology have been explored using Scanning Electron Microscopy. A thorough study regarding the influence of Voltage, flow rate and distance have been carried out to determine the appropriate parameters to obtain the fibrous mats without defects and with a good distribution of diameters. Cytocompatibility has also been in vitro tested. For the first time we use the co-recombinamer Silk-ELR for the fabrication of a 2.5 angioplasty balloon coating. This structure could be useful as a coated scaffold for the regeneration of intima layer of vessels., “THE GRAIL” (Tissue in Host Engineering Guided Regeneration of Arterial Intima Layer) project, European Union’s ‘Seventh Framework’ Programme for research, technological development and demonstration (grant HEALTH.2011.1.4-2-278557), European Commission (NMP-2014- 646075, MSCA-ITN-2014-642687), Ministerio de Economía, Industria y Competitividad (grant PCIN-2015-010, MAT2015-68901-R, MAT2016- 78903-R), Junta de Castilla y León (VA015U16), Centro en Red de Medicina Regenerativa y Terapia Celular de Castilla y León
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A bioactive elastin-like recombinamer reduces unspecific protein adsorption and enhances cell response on titanium surfaces.

  • Salvagni, Emiliano
  • Berguig, Geoffrey
  • Engel López, Elisabeth|||0000-0003-4855-8874
  • Rodriguez Cabello, Jose Carlos
  • Coullerez, Geraldine
  • Textor, Marcus
  • Planell Estany, Josep Anton|||0000-0003-2151-8370
  • Gil Mur, Francisco Javier|||0000-0002-6824-1412
  • Aparicio Bádenas, Conrado José|||0000-0003-2969-6067
We present the immobilization on synthetic substrates of elastin-like recombinamers (ELR) that combine a bioactive motif for cell adhesion with protein antifouling properties. Physical adsorption of the recombinamers and covalent-grafting through organosilane chemistry were investigated. The biochemically-modified surfaces were thoroughly characterized and tested for protein absorption in serum by fluorescence-labelling, XPS, Ellipsometry, and OWLS. The ELR were successfully grafted and stable, even upon mechanical stresses; being the covalent bonding favourable over physical adsorption. The coated metal surfaces exhibited excellent reduction of serum protein adsorption (9 ng/cm2) compared to the bare metal surface (310 ng/cm2). Non-specific protein adsorption may mask the introduced bioactive motifs; therefore, the bioactivated surfaces should display serum-protein antifouling properties. Finally, improved hMSCs response was assessed on the bioactivated substrates. In summary, the coatings simultaneously displayed anti-fouling and bioactive properties. These studies investigated key factors to enhance tissue material interactions fundamental for the design of bioactive devices and future biomedical applications., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Development of tailored and self-mineralizing citric acid-crosslinked hydrogels for in situ bone regeneration

  • Sanchez Ferrero, Aitor
  • Mata, Álvaro
  • Mateos Timoneda, Miguel Ángel|||0000-0001-7657-1414
  • Rodriguez Cabello, Jose Carlos
  • Alonso, Matilde
  • Planell Estany, Josep Anton|||0000-0003-2151-8370
  • Engel López, Elisabeth|||0000-0003-4855-8874
Bone tissue engineering demands alternatives overcoming the limitations of traditional approaches in the context of a constantly aging global population. In the present study, elastin-like recombinamers hydrogels were produced by means of carbodiimide-catalyzed crosslinking with citric acid, a molecule suggested to be essential for bone nanostructure. By systematically studying the effect of the relative abundance of reactive species on gelation and hydrogel properties such as functional groups content, degradation and structure, we were able to understand and to control the crosslinking reaction to achieve hydrogels mimicking the fibrillary nature of the extracellular matrix. By studying the effect of polymer concentration on scaffold mechanical properties, we were able to produce hydrogels with a stiffness value of 36.13 +/- 10.72 kPa, previously suggested to be osteoinductive. Microstructured and mechanically-tailored hydrogels supported the growth of human mesenchymal stem cells and led to higher osteopontin expression in comparison to their non-tailored counterparts. Additionally, tailored hydrogels were able to rapidly self-mineralize in biomimetic conditions, evidencing that citric acid was successfully used both as a crosslinker and a bioactive molecule providing polymers with calcium phosphate nucleation capacity. (C) 2015 Elsevier Ltd. All rights reserved.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

3D silicon doped hydroxyapatite scaffolds decorated with Elastin-like Recombinamers for bone regenerative medicine

  • Vila, Mercedes
  • García, Ana
  • Girotti, Alessandra
  • Alonso, Matilde
  • Rodriguez Cabello, Jose Carlos
  • Gonzalez Vazquez, Arlyng
  • Planell Estany, Josep Anton|||0000-0003-2151-8370
  • Engel López, Elisabeth|||0000-0003-4855-8874
  • Buján, Julia
  • García Honduvilla, Natalio
  • Vallet Regi, Maria
The current study reports on the manufacturing by rapid prototyping technique of three-dimensional (3D) scaffolds based on silicon substituted hydroxyapatite with Elastin-like Recombinamers (ELRs) functionalized surfaces. Silicon doped hydroxyapatite (Si-HA), with Ca10(PO4)5.7(SiO4)0.3(OH)1.7h0.3 nominal formula, was surface functionalized with two different types of polymers designed by genetic engineering: ELR-RGD that contain cell attachment specific sequences and ELR-SNA15/RGD with both hydroxyapatite and cells domains that interact with the inorganic phase and with the cells, respectively. These hybrid materials were subjected to in vitro assays in order to clarify if the ELRs coating improved the well-known biocompatible and bone regeneration properties of calcium phosphates materials. The in vitro tests showed that there was a total and homogeneous colonization of the 3D scaffolds by Bone marrow Mesenchymal Stromal Cells (BMSCs). In addition, the BMSCs were viable and able to proliferate and differentiate into osteoblasts., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Formation of calcium phosphate nanostructures under the influence of self-assembling hybrid elastin-like-statherin recombinamers

  • Hamed Misbah, M.
  • Español Pons, Montserrat|||0000-0001-7510-0602
  • Quintanilla, Luis
  • Ginebra Molins, Maria Pau|||0000-0002-4700-5621
  • Rodriguez Cabello, Jose Carlos
The self-assembling properties of thermally-sensitive amphiphilic elastin-like multiblock recombinamers have been combined with the capacities of calcium phosphate binding of the SN(A)15 epitope inspired by the salivary protein statherin. In this regard, the interaction between calcium and phosphate ions was examined in the presence of two hybrid recombinamers. The first recombinamer comprised a simple amphiphilic diblock in which the SN(A)15 epitopes were combined, at the gene level, to the hydrophilic end. This recombinamer can self-assemble into nanoparticles that can control the transformation of amorphous calcium phosphate (ACP) into a fibre-like hydroxyapatite structure. In the other recombinamer, the SN(A)15 domains are distributed along the monomer chain, with the hydrophilic blocks being distributed amongst the hydrophobic ones. In this case, the resulting nanohybrid ACP/recombinamer organises into neuron-like structures. Thus, combining the amphiphilic elastin-like recombinamers to the SN(A)15 functionality is a powerful mean to tune the formation of different complex calcium phosphate nanostructures., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A bioactive elastin-like recombinamer reduces unspecific protein adsorption and enhances cell response on titanium surfaces.

  • Salvagni, Emiliano
  • Berguig, Geoffrey
  • Engel López, Elisabeth
  • Rodriguez Cabello, Jose Carlos
  • Coullerez, Geraldine
  • Textor, Marcus
  • Planell Estany, Josep Anton
  • Gil Mur, Francisco Javier
  • Aparicio Bádenas, Conrado José
We present the immobilization on synthetic substrates of elastin-like recombinamers (ELR) that combine a bioactive motif for cell adhesion with protein antifouling properties. Physical adsorption of the recombinamers and covalent-grafting through organosilane chemistry were investigated. The biochemically-modified surfaces were thoroughly characterized and tested for protein absorption in serum by fluorescence-labelling, XPS, Ellipsometry, and OWLS. The ELR were successfully grafted and stable, even upon mechanical stresses; being the covalent bonding favourable over physical adsorption. The coated metal surfaces exhibited excellent reduction of serum protein adsorption (9 ng/cm2) compared to the bare metal surface (310 ng/cm2). Non-specific protein adsorption may mask the introduced bioactive motifs; therefore, the bioactivated surfaces should display serum-protein antifouling properties. Finally, improved hMSCs response was assessed on the bioactivated substrates. In summary, the coatings simultaneously displayed anti-fouling and bioactive properties. These studies investigated key factors to enhance tissue material interactions fundamental for the design of bioactive devices and future biomedical applications., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Virtual exploration of early stage atherosclerosis

  • Olivares, Andy L.
  • González Ballester, Miguel Ángel, 1973-
  • Noailly, Jérôme
Motivation: Biological mechanisms contributing to atherogenesis are multiple and complex. The early stage of atherosclerosis (AS) is characterized by the accumulation of low-density lipoprotein (LDL) droplets, leading to the creation of foam cells (FC). To address the difficulty to explore the dynamics of interactions that controls this process, this study aimed to develop a model of agents and infer on the most influential cell- and molecule-related parameters. Results: FC started to accumulate after six to eight months of simulated hypercholesterolemia. A sensitivity analysis revealed the strong influence of LDL oxidation rate on the risk of FC creation, which was exploited to model the antioxidant effect of statins. Combined with an empirical simulation of the drug ability to decrease the level of LDL, the virtual statins treatment led to reductions of oxidized LDL levels similar to reductions measured in vivo. Availability and Implementation: An Open source software was used to develop the agent-based model of early AS. Two different concentrations of LDL agents were imposed in the intima layer to simulate healthy and hypercholesterolemia groups of ‘virtual patients’. The interactions programmed between molecules and cells were based on experiments and models reported in the literature. A factorial sensitivity analysis explored the respective effects of the less documented model parameters as (i) agent migration speed, (ii) LDL oxidation rate and (iii) concentration of autoantibody agents. Finally, the response of the model to known perturbations was assessed by introducing statins agents, able to reduce the oxidation rate of LDL agents and the LDL boundary concentrations., This work was supported by the European Commission (THE GRAIL-GA-278557) and the Spanish Ministry of Economy and Competitiveness (DEFENSE project, TIN2013-47913-C3-1-R).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Development of tailored and self-mineralizing citric acid-crosslinked hydrogels for in situ bone regeneration

  • Sanchez Ferrero, Aitor
  • Mata, Álvaro
  • Mateos Timoneda, Miguel Ángel
  • Rodriguez Cabello, Jose Carlos
  • Alonso, Matilde
  • Planell Estany, Josep Anton
  • Engel López, Elisabeth
Bone tissue engineering demands alternatives overcoming the limitations of traditional approaches in the context of a constantly aging global population. In the present study, elastin-like recombinamers hydrogels were produced by means of carbodiimide-catalyzed crosslinking with citric acid, a molecule suggested to be essential for bone nanostructure. By systematically studying the effect of the relative abundance of reactive species on gelation and hydrogel properties such as functional groups content, degradation and structure, we were able to understand and to control the crosslinking reaction to achieve hydrogels mimicking the fibrillary nature of the extracellular matrix. By studying the effect of polymer concentration on scaffold mechanical properties, we were able to produce hydrogels with a stiffness value of 36.13 +/- 10.72 kPa, previously suggested to be osteoinductive. Microstructured and mechanically-tailored hydrogels supported the growth of human mesenchymal stem cells and led to higher osteopontin expression in comparison to their non-tailored counterparts. Additionally, tailored hydrogels were able to rapidly self-mineralize in biomimetic conditions, evidencing that citric acid was successfully used both as a crosslinker and a bioactive molecule providing polymers with calcium phosphate nucleation capacity. (C) 2015 Elsevier Ltd. All rights reserved., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

3D silicon doped hydroxyapatite scaffolds decorated with Elastin-like Recombinamers for bone regenerative medicine

  • Vila, Mercedes
  • García, Ana
  • Girotti, Alessandra
  • Alonso, Matilde
  • Rodriguez Cabello, Jose Carlos
  • Gonzalez Vazquez, Arlyng
  • Planell Estany, Josep Anton
  • Engel López, Elisabeth
  • Buján, Julia
  • García Honduvilla, Natalio
  • Vallet Regi, Maria
The current study reports on the manufacturing by rapid prototyping technique of three-dimensional (3D) scaffolds based on silicon substituted hydroxyapatite with Elastin-like Recombinamers (ELRs) functionalized surfaces. Silicon doped hydroxyapatite (Si-HA), with Ca10(PO4)5.7(SiO4)0.3(OH)1.7h0.3 nominal formula, was surface functionalized with two different types of polymers designed by genetic engineering: ELR-RGD that contain cell attachment specific sequences and ELR-SNA15/RGD with both hydroxyapatite and cells domains that interact with the inorganic phase and with the cells, respectively. These hybrid materials were subjected to in vitro assays in order to clarify if the ELRs coating improved the well-known biocompatible and bone regeneration properties of calcium phosphates materials. The in vitro tests showed that there was a total and homogeneous colonization of the 3D scaffolds by Bone marrow Mesenchymal Stromal Cells (BMSCs). In addition, the BMSCs were viable and able to proliferate and differentiate into osteoblasts., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Formation of calcium phosphate nanostructures under the influence of self-assembling hybrid elastin-like-statherin recombinamers

  • Hamed Misbah, M.
  • Español Pons, Montserrat
  • Quintanilla, Luis
  • Ginebra Molins, Maria Pau
  • Rodriguez Cabello, Jose Carlos
The self-assembling properties of thermally-sensitive amphiphilic elastin-like multiblock recombinamers have been combined with the capacities of calcium phosphate binding of the SN(A)15 epitope inspired by the salivary protein statherin. In this regard, the interaction between calcium and phosphate ions was examined in the presence of two hybrid recombinamers. The first recombinamer comprised a simple amphiphilic diblock in which the SN(A)15 epitopes were combined, at the gene level, to the hydrophilic end. This recombinamer can self-assemble into nanoparticles that can control the transformation of amorphous calcium phosphate (ACP) into a fibre-like hydroxyapatite structure. In the other recombinamer, the SN(A)15 domains are distributed along the monomer chain, with the hydrophilic blocks being distributed amongst the hydrophobic ones. In this case, the resulting nanohybrid ACP/recombinamer organises into neuron-like structures. Thus, combining the amphiphilic elastin-like recombinamers to the SN(A)15 functionality is a powerful mean to tune the formation of different complex calcium phosphate nanostructures., Peer Reviewed, Postprint (author's final draft)