Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

3D silicon doped hydroxyapatite scaffolds decorated with Elastin-like Recombinamers for bone regenerative medicine

  • Vila, Mercedes
  • García, Ana
  • Girotti ., Alessandra
  • Alonso Rodrigo, Matilde
  • Rodríguez Cabello, José Carlos
  • González Vázquez, Arlyng
  • Planell i Estany, Josep A.
  • Engel López, Elisabeth
  • Buján Varela, Julia
  • García Honduvilla, Natalio
  • Vallet Regí, María
Producción Científica, The current study reports on the manufacturing by rapid prototyping technique of three-dimensional (3D) scaffolds based on silicon substituted hydroxyapatite with Elastin-like Recombinamers (ELRs) func- tionalized surfaces. Silicon doped hydroxyapatite (Si-HA), with Ca10(PO4)5.7(SiO4)0.3(OH)1.7h0.3 nominal formula, was surface functionalized with two different types of polymers designed by genetic engineer- ing: ELR-RGD that contain cell attachment specific sequences and ELR-SNA15/RGD with both hydroxya- patite and cells domains that interact with the inorganic phase and with the cells, respectively. These hybrid materials were subjected to in vitro assays in order to clarify if the ELRs coating improved the well-known biocompatible and bone regeneration properties of calcium phosphates materials. The in vitro tests showed that there was a total and homogeneous colonization of the 3D scaffolds by Bone marrow Mesenchymal Stromal Cells (BMSCs). In addition, the BMSCs were viable and able to proliferate and differentiate into osteoblasts., Ministerio de Industria, Economía y Competitividad (proyectos MAT2013-42473-R y MAT2013-41723-R), Ministerio de Ciencia e Innovación (proyectos MAT2012-35556 y MAT2009-14195-C03-02), Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA244U13), Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA313U14)
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Chitosan-recombinamer layer-by-layer coatings for multifunctional implants

  • Govindharajulu, Jeevan Prasaad
  • Rodríguez Cabello, José Carlos
  • Battacharya, Mrinal
  • Aparicio, Conrado
Producción Científica, The main clinical problems for dental implants are (1) formation of biofilm around the implant—a condition known as peri-implantitis and (2) inadequate bone formation around the implant—lack of osseointegration. Therefore, developing an implant to overcome these problems is of significant interest to the dental community. Chitosan has been reported to have good biocompatibility and anti-bacterial activity. An osseo-inductive recombinant elastin-like biopolymer (P-HAP), that contains a peptide derived from the protein statherin, has been reported to induce biomineralization and osteoblast differentiation. In this study, chitosan/P-HAP bi-layers were built on a titanium surface using a layer-by-layer (LbL) assembly technique. The difference in the water contact angle between consecutive layers, the representative peaks in diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), X-ray photoelectron spectroscopy (XPS), and the changes in the topography between surfaces with a different number of bi-layers observed using atomic force microscopy (AFM), all indicated the successful establishment of chitosan/P-HAP LbL assembly on the titanium surface. The LbL-modified surfaces showed increased biomineralization, an appropriate mouse pre-osteoblastic cell response, and significant anti-bacterial activity against Streptococcus gordonii, a primary colonizer of tissues in the oral environment, Ministerio de Economía, Industria y Competitividad (Project MAT2013-42473-R and MAT2015-68901R), Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA244U13, VA313U14 and VA015U16)
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Human adipose derived stem cells are superior to human osteoblasts (HOB) in bone tissue engineering on a collagen-fibroin-ELR blend

  • Sayin, Esen
  • Hama Rashid, Rosti
  • Rodríguez Cabello, José Carlos
  • Elsheikh Erkan, Ahmed
  • Türker Baran, Erkan
  • Hasirci, Vasif
Producción Científica, The ultrastructure of the bone provides a unique mechanical strength against compressive, torsional and tensional stresses. An elastin-like recombinamer (ELR) with a nucleation sequence for hydroxyapatite was incorporated into films prepared from a collagen – silk fibroin blend carrying microchannel patterns to stimulate anisotropic osteogenesis. SEM and fluorescence microscopy showed the alignment of adipose-derived stem cells (ADSCs) and the human osteoblasts (HOBs) on the ridges and in the grooves of microchannel patterned collagen-fibroin-ELR blend films. The Young's modulus and the ultimate tensile strength (UTS) of untreated films were 0.58 ± 0.13 MPa and 0.18 ± 0.05 MPa, respectively. After 28 days of cell culture, ADSC seeded film had a Young's modulus of 1.21 ± 0.42 MPa and UTS of 0.32 ± 0.15 MPa which were about 3 fold higher than HOB seeded films. The difference in Young's modulus was statistically significant (p: 0.02). ADSCs attached, proliferated and mineralized better than the HOBs. In the light of these results, ADSCs served as a better cell source than HOBs for bone tissue engineering of collagen-fibroin-ELR based constructs used in this study. We have thus shown the enhancement in the tensile mechanical properties of the bone tissue engineered scaffolds by using ADSCs., Ministerio de Economía, Industria y Competitividad (Project MAT2013-42473-R and MAT2015-68901R), Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. (VA244U13, VA313U14 and VA015U16)
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Recombinant DNA technology and click chemistry: a powerful combination for generating a hybrid elastin-like-statherin hydrogel to control calcium phosphate mineralization

  • Hamed Misbah, Mohamed
  • Santos García, María Mercedes
  • Quintanilla Sierra, Luis
  • Günter, Christina
  • Alonso Rodrigo, Matilde
  • Taubert, Andreas
  • Rodríguez Cabello, José Carlos
Producción Científica, Understanding the mechanisms responsible for generating different phases and morphologies of calcium phosphate by elastin-like recombinamers is supreme for bioengineering of advanced multifunctional materials. The generation of such multifunctional hybrid materials depends on the properties of their counterparts and the way in which they are assembled. The success of this assembly depends on the different approaches used, such as recombinant DNA technology and click chemistry. In the present work, an elastin-like recombinamer bearing lysine amino acids distributed along the recombinamer chain has been cross-linked via Huisgen [2 + 3] cycloaddition. The recombinamer contains the SNA15 peptide domains inspired by salivary statherin, a peptide epitope known to specifically bind to and nucleate calcium phosphate. The benefit of using click chemistry is that the hybrid elastin-like-statherin recombinamers cross-link without losing their fibrillar structure. Mineralization of the resulting hybrid elastin-like-statherin recombinamer hydrogels with calcium phosphate is described. Thus, two different hydroxyapatite morphologies (cauliflower- and plate-like) have been formed. Overall, this study shows that crosslinking elastin-like recombinamers leads to interesting matrix materials for the generation of calcium phosphate composites with potential applications as biomaterials., Ministerio de Economía, Industria y Competitividad (Project MAT2013- 42473-R and MAT2013-41723-R), Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA244U13, VA313U14 and GRS/516/A/10)
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Regeneration of hyaline cartilage promoted by xenogeneic mesenchymal stromal cells embedded within elastin-like recombinamer-based bioactive hydrogels

  • Pescador, David
  • Ibáñez Fonseca, Arturo
  • Sánchez Guijo, Fermín
  • G. Briñón, Jesús
  • Arias Vallejo, Francisco Javier
  • Muntión, Sandra
  • Hernández, Cristina
  • Girotti ., Alessandra
  • Alonso Rodrigo, Matilde
  • Cañizo, María Consuelo del
  • Rodríguez Cabello, José Carlos
  • Blanco, Juan Francisco
Producción Científica, Over the last decades, novel therapeutic tools for osteochondral regeneration have arisen from the combination of mesenchymal stromal cells (MSCs) and highly specialized smart biomaterials, such as hydrogel-forming elastin-like recombinamers (ELRs), which could serve as cell-carriers. Herein, we evaluate the delivery of xenogeneic human MSCs (hMSCs) within an injectable ELR-based hydrogel carrier for osteochondral regeneration in rabbits. First, a critical-size osteochondral defect was created in the femora of the animals and subsequently filled with the ELR-based hydrogel alone or with embedded hMSCs. Regeneration outcomes were evaluated after three months by gross assessment, magnetic resonance imaging and computed tomography, showing complete filling of the defect and the de novo formation of hyaline-like cartilage and subchondral bone in the hMSC-treated knees. Furthermore, histological sectioning and staining of every sample confirmed regeneration of the full cartilage thickness and early subchondral bone repair, which was more similar to the native cartilage in the case of the cell-loaded ELR-based hydrogel. Overall histological differences between the two groups were assessed semi-quantitatively using the Wakitani scale and found to be statistically significant (p < 0.05). Immunofluorescence against a human mitochondrial antibody three months post-implantation showed that the hMSCs were integrated into the de novo formed tissue, thus suggesting their ability to overcome the interspecies barrier. Hence, we conclude that the use of xenogeneic MSCs embedded in an ELR-based hydrogel leads to the successful regeneration of hyaline cartilage in osteochondral lesions., Ministerio de Economía, Industria y Competitividad (Project (MAT2016-78903-R, MAT2016-9 79435-R, MAT2013-42473-R, MAT2013-41723-R and MAT2012-38043), Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA244U13, VA313U14 and GRS/516/A/10)
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Intrafibrillar Mineralization of Self-Assembled Elastin-Like Recombinamer Fibrils

  • Li, Yuping
  • Rodríguez Cabello, José Carlos
  • Aparicio, Conrado
Producción Científica, Biomineralization of bone, a controlled process where hydroxyapatite nanocrystals preferentially deposit in collagen fibrils, is achieved by the interplay of the collagen matrix and noncollagenous proteins. Mimicking intrafibrillar mineralization in synthetic systems is highly attractive for the development of advanced hybrid materials with elaborated morphologies and outstanding mechanical properties, as well as understanding the mechanisms of biomineralization. Inspired by nature, intrafibrillar mineralization of collagen fibrils has been successfully replicated in vitro via biomimetic systems, where acidic polymeric additives are used as analogue of noncollagenous proteins in mediating mineralization. The development of synthetic templates that mimic the structure and functions of collagenous matrix in mineralization has yet to be explored. In this study, we demonstrated that self-assembled fibrils of elastin-like recombinamers (ELRs) can induce intrafibrillar mineralization. The ELRs displayed a disordered structure at low temperature but self-assembled into nanofibrils above its inverse transition temperature. In the presence of the self-assembled ELR fibrils, polyaspartate-stabilized amorphous calcium phosphates preferentially infiltrated into the fibrils and then crystallized into hydroxyapatite nanocrystals with their [001] axes aligned parallel to the long axis of the ELR fibril. As the recombinant technology enables designing and producing well-defined ELRs, their molecular and structural properties can be fine-tuned. By examining the ultrastructure of the self-assembled ELRs fibrils as well as their mineralization, we concluded that the spatial confinement formed by a continuum β-spiral structure in an unperturbed fibrillar structure rather than electrostatic interactions or bioactive sequences in the recombinamer composition played the crucial role in inducing intrafibrillar mineralization., 2018-08-01, Ministerio de Economía, Industria y Competitividad (Project MAT2013-42473-R and MAT2015-68901R), Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA244U13, VA313U14 and VA015U16)