Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

3D silicon doped hydroxyapatite scaffolds decorated with Elastin-like Recombinamers for bone regenerative medicine

  • Vila, Mercedes
  • García, Ana
  • Girotti ., Alessandra
  • Alonso Rodrigo, Matilde
  • Rodríguez Cabello, José Carlos
  • González Vázquez, Arlyng
  • Planell i Estany, Josep A.
  • Engel López, Elisabeth
  • Buján Varela, Julia
  • García Honduvilla, Natalio
  • Vallet Regí, María
Producción Científica, The current study reports on the manufacturing by rapid prototyping technique of three-dimensional (3D) scaffolds based on silicon substituted hydroxyapatite with Elastin-like Recombinamers (ELRs) func- tionalized surfaces. Silicon doped hydroxyapatite (Si-HA), with Ca10(PO4)5.7(SiO4)0.3(OH)1.7h0.3 nominal formula, was surface functionalized with two different types of polymers designed by genetic engineer- ing: ELR-RGD that contain cell attachment specific sequences and ELR-SNA15/RGD with both hydroxya- patite and cells domains that interact with the inorganic phase and with the cells, respectively. These hybrid materials were subjected to in vitro assays in order to clarify if the ELRs coating improved the well-known biocompatible and bone regeneration properties of calcium phosphates materials. The in vitro tests showed that there was a total and homogeneous colonization of the 3D scaffolds by Bone marrow Mesenchymal Stromal Cells (BMSCs). In addition, the BMSCs were viable and able to proliferate and differentiate into osteoblasts., Ministerio de Industria, Economía y Competitividad (proyectos MAT2013-42473-R y MAT2013-41723-R), Ministerio de Ciencia e Innovación (proyectos MAT2012-35556 y MAT2009-14195-C03-02), Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA244U13), Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA313U14)
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Biomimetic click assembled multilayer coatings exhibiting responsive properties

  • Sousa, Maria P.
  • González de Torre, Israel
  • Oliveira, Mariana B.
  • Rodríguez Cabello, José Carlos
  • Mano, João
Producción Científica, Stimuli-responsive polymers are capable of changing their physico-chemical properties in a dynamic way, to respond to variations on the surrounding environment. These materials have gained increasingly importance for different areas, such as drug delivery, biosensors, microelectronic systems and also for the design and modification of biomaterials to apply on tissue engineering field. In the last years, different strategies have been envisaged for the development of stimuli-responsive biomaterials. Layer-by-layer (LbL) is a promising and versatile technique to modify biomaterials' surfaces, and has allowed tailoring interactions with cells. In this study, LbL is used to construct biomimetic stimuli-responsive coatings using elastin-like recombinamers (ELRs). The recombinant nature of ELRs provides the ability to introduce specific bioactive sequences and to tune their physicochemical properties, making them attractive for biomedical and biological applications. By using complementary clickable ELRs, we were able to construct multilayer coatings stabilized by covalent bonds, resulting from the Huisgen 1,3-dipolar cycloaddition of azides and alkynes. Herein, we exploited the switchable properties of the ELRs-based coatings which are dependent on lower critical solution temperature (LCST) transition. Above LCST, the polymers collapsed and nanostructured precipitates were observed on the surface's morphology, increasing the water contact angle. Also, the influence of pH on prompting reversible responses on coatings was evaluated. Finally, in vitro cell studies using a C2C12 myoblastic cell line were performed to perceive the importance of having bioactive domains within these coatings. The effect of RGD incorporation is clearly noted not only in terms of adhesion and proliferation but also in terms of myoblast differentiation.
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Chitosan-recombinamer layer-by-layer coatings for multifunctional implants

  • Govindharajulu, Jeevan Prasaad
  • Rodríguez Cabello, José Carlos
  • Battacharya, Mrinal
  • Aparicio, Conrado
Producción Científica, The main clinical problems for dental implants are (1) formation of biofilm around the implant—a condition known as peri-implantitis and (2) inadequate bone formation around the implant—lack of osseointegration. Therefore, developing an implant to overcome these problems is of significant interest to the dental community. Chitosan has been reported to have good biocompatibility and anti-bacterial activity. An osseo-inductive recombinant elastin-like biopolymer (P-HAP), that contains a peptide derived from the protein statherin, has been reported to induce biomineralization and osteoblast differentiation. In this study, chitosan/P-HAP bi-layers were built on a titanium surface using a layer-by-layer (LbL) assembly technique. The difference in the water contact angle between consecutive layers, the representative peaks in diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), X-ray photoelectron spectroscopy (XPS), and the changes in the topography between surfaces with a different number of bi-layers observed using atomic force microscopy (AFM), all indicated the successful establishment of chitosan/P-HAP LbL assembly on the titanium surface. The LbL-modified surfaces showed increased biomineralization, an appropriate mouse pre-osteoblastic cell response, and significant anti-bacterial activity against Streptococcus gordonii, a primary colonizer of tissues in the oral environment, Ministerio de Economía, Industria y Competitividad (Project MAT2013-42473-R and MAT2015-68901R), Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA244U13, VA313U14 and VA015U16)
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Human adipose derived stem cells are superior to human osteoblasts (HOB) in bone tissue engineering on a collagen-fibroin-ELR blend

  • Sayin, Esen
  • Hama Rashid, Rosti
  • Rodríguez Cabello, José Carlos
  • Elsheikh Erkan, Ahmed
  • Türker Baran, Erkan
  • Hasirci, Vasif
Producción Científica, The ultrastructure of the bone provides a unique mechanical strength against compressive, torsional and tensional stresses. An elastin-like recombinamer (ELR) with a nucleation sequence for hydroxyapatite was incorporated into films prepared from a collagen – silk fibroin blend carrying microchannel patterns to stimulate anisotropic osteogenesis. SEM and fluorescence microscopy showed the alignment of adipose-derived stem cells (ADSCs) and the human osteoblasts (HOBs) on the ridges and in the grooves of microchannel patterned collagen-fibroin-ELR blend films. The Young's modulus and the ultimate tensile strength (UTS) of untreated films were 0.58 ± 0.13 MPa and 0.18 ± 0.05 MPa, respectively. After 28 days of cell culture, ADSC seeded film had a Young's modulus of 1.21 ± 0.42 MPa and UTS of 0.32 ± 0.15 MPa which were about 3 fold higher than HOB seeded films. The difference in Young's modulus was statistically significant (p: 0.02). ADSCs attached, proliferated and mineralized better than the HOBs. In the light of these results, ADSCs served as a better cell source than HOBs for bone tissue engineering of collagen-fibroin-ELR based constructs used in this study. We have thus shown the enhancement in the tensile mechanical properties of the bone tissue engineered scaffolds by using ADSCs., Ministerio de Economía, Industria y Competitividad (Project MAT2013-42473-R and MAT2015-68901R), Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. (VA244U13, VA313U14 and VA015U16)
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Recombinant DNA technology and click chemistry: a powerful combination for generating a hybrid elastin-like-statherin hydrogel to control calcium phosphate mineralization

  • Hamed Misbah, Mohamed
  • Santos García, María Mercedes
  • Quintanilla Sierra, Luis
  • Günter, Christina
  • Alonso Rodrigo, Matilde
  • Taubert, Andreas
  • Rodríguez Cabello, José Carlos
Producción Científica, Understanding the mechanisms responsible for generating different phases and morphologies of calcium phosphate by elastin-like recombinamers is supreme for bioengineering of advanced multifunctional materials. The generation of such multifunctional hybrid materials depends on the properties of their counterparts and the way in which they are assembled. The success of this assembly depends on the different approaches used, such as recombinant DNA technology and click chemistry. In the present work, an elastin-like recombinamer bearing lysine amino acids distributed along the recombinamer chain has been cross-linked via Huisgen [2 + 3] cycloaddition. The recombinamer contains the SNA15 peptide domains inspired by salivary statherin, a peptide epitope known to specifically bind to and nucleate calcium phosphate. The benefit of using click chemistry is that the hybrid elastin-like-statherin recombinamers cross-link without losing their fibrillar structure. Mineralization of the resulting hybrid elastin-like-statherin recombinamer hydrogels with calcium phosphate is described. Thus, two different hydroxyapatite morphologies (cauliflower- and plate-like) have been formed. Overall, this study shows that crosslinking elastin-like recombinamers leads to interesting matrix materials for the generation of calcium phosphate composites with potential applications as biomaterials., Ministerio de Economía, Industria y Competitividad (Project MAT2013- 42473-R and MAT2013-41723-R), Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA244U13, VA313U14 and GRS/516/A/10)
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Regeneration of hyaline cartilage promoted by xenogeneic mesenchymal stromal cells embedded within elastin-like recombinamer-based bioactive hydrogels

  • Pescador, David
  • Ibáñez Fonseca, Arturo
  • Sánchez Guijo, Fermín
  • G. Briñón, Jesús
  • Arias Vallejo, Francisco Javier
  • Muntión, Sandra
  • Hernández, Cristina
  • Girotti ., Alessandra
  • Alonso Rodrigo, Matilde
  • Cañizo, María Consuelo del
  • Rodríguez Cabello, José Carlos
  • Blanco, Juan Francisco
Producción Científica, Over the last decades, novel therapeutic tools for osteochondral regeneration have arisen from the combination of mesenchymal stromal cells (MSCs) and highly specialized smart biomaterials, such as hydrogel-forming elastin-like recombinamers (ELRs), which could serve as cell-carriers. Herein, we evaluate the delivery of xenogeneic human MSCs (hMSCs) within an injectable ELR-based hydrogel carrier for osteochondral regeneration in rabbits. First, a critical-size osteochondral defect was created in the femora of the animals and subsequently filled with the ELR-based hydrogel alone or with embedded hMSCs. Regeneration outcomes were evaluated after three months by gross assessment, magnetic resonance imaging and computed tomography, showing complete filling of the defect and the de novo formation of hyaline-like cartilage and subchondral bone in the hMSC-treated knees. Furthermore, histological sectioning and staining of every sample confirmed regeneration of the full cartilage thickness and early subchondral bone repair, which was more similar to the native cartilage in the case of the cell-loaded ELR-based hydrogel. Overall histological differences between the two groups were assessed semi-quantitatively using the Wakitani scale and found to be statistically significant (p < 0.05). Immunofluorescence against a human mitochondrial antibody three months post-implantation showed that the hMSCs were integrated into the de novo formed tissue, thus suggesting their ability to overcome the interspecies barrier. Hence, we conclude that the use of xenogeneic MSCs embedded in an ELR-based hydrogel leads to the successful regeneration of hyaline cartilage in osteochondral lesions., Ministerio de Economía, Industria y Competitividad (Project (MAT2016-78903-R, MAT2016-9 79435-R, MAT2013-42473-R, MAT2013-41723-R and MAT2012-38043), Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA244U13, VA313U14 and GRS/516/A/10)
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Intrafibrillar Mineralization of Self-Assembled Elastin-Like Recombinamer Fibrils

  • Li, Yuping
  • Rodríguez Cabello, José Carlos
  • Aparicio, Conrado
Producción Científica, Biomineralization of bone, a controlled process where hydroxyapatite nanocrystals preferentially deposit in collagen fibrils, is achieved by the interplay of the collagen matrix and noncollagenous proteins. Mimicking intrafibrillar mineralization in synthetic systems is highly attractive for the development of advanced hybrid materials with elaborated morphologies and outstanding mechanical properties, as well as understanding the mechanisms of biomineralization. Inspired by nature, intrafibrillar mineralization of collagen fibrils has been successfully replicated in vitro via biomimetic systems, where acidic polymeric additives are used as analogue of noncollagenous proteins in mediating mineralization. The development of synthetic templates that mimic the structure and functions of collagenous matrix in mineralization has yet to be explored. In this study, we demonstrated that self-assembled fibrils of elastin-like recombinamers (ELRs) can induce intrafibrillar mineralization. The ELRs displayed a disordered structure at low temperature but self-assembled into nanofibrils above its inverse transition temperature. In the presence of the self-assembled ELR fibrils, polyaspartate-stabilized amorphous calcium phosphates preferentially infiltrated into the fibrils and then crystallized into hydroxyapatite nanocrystals with their [001] axes aligned parallel to the long axis of the ELR fibril. As the recombinant technology enables designing and producing well-defined ELRs, their molecular and structural properties can be fine-tuned. By examining the ultrastructure of the self-assembled ELRs fibrils as well as their mineralization, we concluded that the spatial confinement formed by a continuum β-spiral structure in an unperturbed fibrillar structure rather than electrostatic interactions or bioactive sequences in the recombinamer composition played the crucial role in inducing intrafibrillar mineralization., 2018-08-01, Ministerio de Economía, Industria y Competitividad (Project MAT2013-42473-R and MAT2015-68901R), Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA244U13, VA313U14 and VA015U16)
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Control of angiogenesis and host response by modulating the cell adhesion properties of an Elastin-Like Recombinamer-based hydrogel

  • Staubli, Sebastian Manuel
  • Cerino, Giulia
  • González de Torre, Israel
  • Alonso Rodrigo, Matilde
  • Oertli, Daniel
  • Eckstein, Friedrich
  • Glatz, Katharina
  • Rodríguez Cabello, José Carlos
  • Marsano, Anna
Producción Científica, The control of the in vivo vascularization of engineered tissue substitutes is essential in order to obtain either a rapid induction or a complete inhibition of the process (e.g. in muscles and hyaline-cartilage, respectively). Among the several polymers available, Elastin-Like Recombinamers (ELR)-based hydrogel stands out as a promising material for tissue engineering thanks to its viscoelastic properties, non-toxicity, and non-immunogenicity. In this study, we hypothesized that varying the cell adhesion properties of ELR-hydrogels could modulate the high angiogenic potential of adipose tissue-derived stromal vascular fraction (SVF) cells, predominantly composed of endothelial/mural and mesenchymal cells. Human SVF cells, embedded in RGD-REDV-bioactivated or unmodified ELR-hydrogels, were implanted in rat subcutaneous pockets either immediately or upon 5-day-culture in perfusion-bioreactors. Perfusion-based culture enhanced the endothelial cell cord-like-organization and the release of pro-angiogenic factors in functionalized constructs. While in vivo vascularization and host cell infiltration within the bioactivated gels were highly enhanced, the two processes were strongly inhibited in non-functionalized SVF-based hydrogels up to 28 days. ELR-based hydrogels showed a great potential to determine the successful integration of engineered substitutes thanks to their capacity to finely control the angiogenic/inflammation process at the recipient site, even in presence of SVF cells., Ministerio de Economía, Industria y Competitividad (Project MAT-2010-15982, MAT2010- 15310, PRI-PIBAR-2011-1403 and MAT2012-38043-C02-01), Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref.VA152A12-2, VA244U13 and VA155A12-2)
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Cross-linking of a biopolymer-peptide co-assembling system

  • Inostroza Brito, Karla E.
  • Collin, Estelle
  • Poliniewicz, Anna
  • Elsharkawy, Sherif
  • Rice, Alistair
  • Río Hernández, Armando E. del
  • Xiao, Xin
  • Rodríguez Cabello, José Carlos
  • Mata, Álvaro
Producción Científica, The ability to guide molecular self-assembly at the nanoscale into complex macroscopic structures could enable the development of functional synthetic materials that exhibit properties of natural tissues such as hierarchy, adaptability, and self-healing. However, the stability and structural integrity of these kinds of materials remains a challenge for many practical applications. We have recently developed a dynamic biopolymer-peptide co-assembly system with the capacity to grow and undergo morphogenesis into complex shapes. Here we explored the potential of different synthetic (succinimidyl carboxymethyl ester, poly (ethylene glycol) ether tetrasuccinimidyl glutarate and glutaraldehyde) and natural (genipin) cross-linking agents to stabilize membranes made from these biopolymer-peptide co-assemblies. We investigated the cross-linking efficiency, resistance to enzymatic degradation, and mechanical properties of the different cross-linked membranes. We also compared their biocompatibility by assessing the metabolic activity and morphology of adipose-derived stem cells (ADSC) cultured on the different membranes. While all cross-linkers successfully stabilized the system under physiological conditions, membranes cross-linked with genipin exhibited better resistance in physiological environments, improved stability under enzymatic degradation, and a higher degree of in vitro cytocompatibility compared to the other cross-linking agents. The results demonstrated that genipin is an attractive candidate to provide functional structural stability to complex self-assembling structures for potential tissue engineering or in vitro model applications., Ministerio de Economía, Industria y Competitividad (Project MAT2013-42473-R and MAT2015-68901R), Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA244U13, VA313U14 and VA015U1
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Random and oriented electrospun fibers based on a multicomponent, in situ clickable elastin-like recombinamer system for dermal tissue engineering

  • González de Torre, Israel
  • Ibáñez Fonseca, Arturo
  • Quintanilla Sierra, Luis
  • Alonso Rodrigo, Matilde
  • Rodríguez Cabello, José Carlos
Producción Científica, Herein we present a system to obtain fibers from clickable elastin-like recombinamers (ELRs) that crosslink in situ during the electrospinning process itself, with no need for any further treatment to stabilize them. These ELR-click fibers are completely stable under in vitro conditions. A wrinkled fiber morphology is obtained. In addition to a random fiber orientation, oriented fibers with a high degree of alignment and coherence can also be obtained by using a rotational electrode. The production of multicomponent fibers means that different functionalities, such as cell-adhesion domains (RGD peptides), can be incorporated into them. In a subsequent study, two main cell lines present in the dermis and epidermis, namely keratinocytes and fibroblasts, were cultured on top of the ELR-click fibers. Adhesion, proliferation, fluorescence, immunostaining and histology studies showed the cytocompatibility of these scaffolds, thus suggesting their possible use for wound dressings in skin tissue engineering applications., Ministerio de Economía, Industria y Competitividad (Projects MAT2015-68901-R, MAT2016-78903-R, PCIN-2015-010), Junta de Castilla y León (programa de apoyo a proyectos de investigación - Ref. VA015U16), European Commission (ELASTISLET No 646075, BIOGEL No 642687)
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Tuning the stiffness of surfaces by assembling genetically engineered polypeptides with tailored amino acid sequence

  • Costa, Rui R.
  • González Pérez, Miguel
  • Herrero Gutiérrez, Marcos
  • Pires, Ricardo A.
  • Alonso Rodrigo, Matilde
  • Rodríguez Cabello, José Carlos
  • Reis, Rui Luís
  • Pashkuleva, Iva
Producción Científica, We introduce elastin-like recombinamers (ELRs) as polypeptides with precise amino acid positioning to generate polypeptide coatings with tunable rigidity. Two ELRs are used: V84- ELR, a hydrophobic monoblock, and EI-ELR, an amphiphilic diblock. Both were modified with the amine-reactive tetrakis (hydroxymethyl) phosphonium chloride compound. We evaluated the affinity, the conformation, and the dissipative behavior of ELRs assembled on alkanethiol selfassembled coatings by quartz crystal microbalance with dissipation monitoring, multi-parametric surface plasmon resonance, and atomic force microscopy. The thickness of the polypeptide coatings showcase the preferential affinity of ELRs to NH2 and CH3 terminated surfaces. We demonstrate that V84-ELR strongly bonded to the substrate and reorganizes into an extended and more hydrated layer as the adsorbed amount increases, whereas EI-ELR has a less dissipative behavior. The results suggest that ELR adsorption depends on the amino acid sequence and the substrate chemistry, ultimately influencing the stiffness of the polypeptide coatings., 2019-07-03, 2019-07-03, Fundação para a Ciência e Tecnologia (grants SFRH/BPD/95446/2013 to R.R.C. and IF/00032/2013 to I.P.), Comisión Europea: H2020 programme-projects ELASTISLET (NMP-2014-646075), CHEM2NATURE (TWINN-2015-692333), FORECAST (WIDESPREAD-2014-2-668983), THE DISCOVERIES CTR (WIDESPREAD-01-2016-2017739572), Ministerio de Economía, Industria y Competitividad (Project MAT2015-68901-R, MAT2016-78903-R), Junta de Castilla y León (programa de apoyo a proyectos de investigación - Ref. VA015U16), Ministerio de Educación, Cultura y Deporte (Proyect FPU15-00448)
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Self-Assembly of Janus Au:Fe3O4 Branched Nanoparticles. From Organized Clusters to Stimuli-Responsive Nanogel Suprastructures

  • Reguera Gómez, Javier
  • Flora, Tatjana
  • Winckelmans, Naomi
  • Rodríguez Cabello, José C.
  • Bals, Sara
Janus nanoparticles offer enormous possibilities through a binary selective functionalization and dual properties. Their self-assembly has attracted strong interest due to their potential as building blocks to obtain molecular colloids, supracrystals and well-organized nanostructures that can lead to new functionalities. However, this self-assembly has been focused on relatively simple symmetrical morphologies, while for complex nanostructures this process has been unexplored. Here, we study the assembly of plasmonic-magnetic Janus nanoparticles with a branched (nanostar) - sphere morphology. The branched morphology enhances their plasmonic properties in the near-infrared region and therefore their applicability, but at the same time constrains their self-assembly capabilities to obtain more organized or functional suprastructures. We describe the self-assembly of these nanoparticles after amphiphilic functionalization. The role of the nanoparticle branching, as well as the size of the polymer-coating, is explored. We show how the use of large molecular weight stabilizing polymers can overcome the anisotropy of the nanoparticles producing a change in the morphology from small clusters to larger quasi-cylindrical nanostructures. Finally, the Janus nanoparticles are functionalized with a thermo-responsive elastin-like recombinamer. These nanoparticles undergo reversible self-assembly in the presence of free polymer giving rise to nanoparticle-stabilized nanogel-like structures with controlled size, providing the possibility to expand their applicability to multi-stimuli controlled self-assembly., J. R. acknowledges the.nancial support of Basque Country Elkartek-KK-2019/00101. T. F. and J. C. R-C acknowledge the funding from the European Commission (NMP-2014-646075), the Spanish Government (PCIN-2015-010 (FunBioPlas), MAT2016-78903-R), Junta de Castilla y Leon (VA317P18) and Centro en Red de Medicina Regenerativa y Terapia Celular de Castilla y Leon.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Elastin-like recombinamer-based devices releasing Kv1.3 blockers for the prevention of intimal hyperplasia: An in vitro and in vivo study

  • Moreno-Estar, Sara
  • Serrano, Sofía
  • Arévalo-Martínez, Marycarmen
  • Cidad, Pilar
  • López-López, José R.
  • Santos, Mercedes
  • Pérez-García, M. Teresa
  • Arias, Francisco Javier
Coronary artery disease (CAD) is the most common cardiovascular disorder. Vascular surgery strategies for coronary revascularization (either percutaneous or open) show a high rate of failure because of restenosis of the vessel, due to phenotypic switch of vascular smooth muscle cells (VSMCs) leading to proliferation and migration. We have previously reported that the inhibition of Kv1.3 channel function with selective blockers represents an effective strategy for the prevention of restenosis in human vessels used for coronary angioplasty procedures. However, delivery systems for controlled release of these drugs have not been investigated. Here we tested the efficacy of several formulations of elastin like recombinamers (ELRs) hydrogels to deliver the Kv1.3 blocker PAP-1 in various restenosis models. The dose and time course of PAP-1 release from ELRs click hydrogels was able to inhibit human VSMC proliferation in vitro as well as remodeling of human vessels in organ culture and restenosis in in vivo models. We conclude that this combination of active compound and advanced delivery method could improve the outcomes of vascular surgery in patients., The authors are grateful for financial support from the European Social Fund (ESF) and the European Regional Development Fund (ERDF), as well as grants from the EU H2020-NMP-2014-646075), the Spanish Ministerio de Economia y Competitividad MINECO (grants BFU2016-75360-R, DTS19/00162, MAT2016-79435-R, MAT2016-78903-R and RTI2018-096320-B-C22), the Junta de Castilla y León (grants VA114P17 and VA317P18), the CIBER-BBN, the JCyL and the Instituto de Salud Carlos III under the “Network Center of Regenerative Medicine and Cellular Therapy of Castilla and Leon”. S. Moreno-Estar and S. Serrano are predoctoral fellows of the Junta de Castilla y León and M. Arévalo-Martínez is predoctoral fellow of UVa-Santander.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A DNA Vaccine Delivery Platform Based on Elastin-Like Recombinamer Nanosystems for Rift Valley Fever Virus

  • Gonzalez-Valdivieso, Juan
  • Borrego, Belén
  • Girotti, Alessandra
  • Moreno, Sandra
  • Brun Torres, Alejandro
  • Bermejo-Martin, Jesús
  • Arias, F. Javier
13 Pág., This work analyzes the immunogenicity of six genetically engineered constructs based on elastin-like recombinamers (ELRs) fused to the Gn glycoprotein from Rift Valley fever virus (RVFV). Upon transfection, all constructs showed no effect on cell viability. While fusion constructs including ELR blocks containing hydrophobic amino acids (alanine or isoleucine) did not increase the expression of viral Gn in eukaryotic cells, glutamic acid- or valine-rich fusion proteins showed enhanced expression levels compared with the constructs encoding the viral antigen alone. However, in vivo DNA plasmid immunization assays determined that the more hydrophobic constructs reduced viremia levels after RVFV challenge to a higher extent than glutamic- or valine-rich encoding plasmids and were better inducers of cellular immunity as judged by in vitro restimulation experiments. Although the Gn-ELR fusion constructs did not surpass the protective efficacy of a plasmid vaccine expressing nonfused Gn, our results warrant further experiments directed to take advantage of the immunomodulatory potential of ELR biomaterials for improving vaccines against infectious diseases., The authors are grateful for financial support from the European Social Fund (ESF) and the European Regional Development Fund (ERDF), as well as funding from the EU (H2020-NMP-2014-646075), the MICIUN (DTS19/00162, MAT2016-79435-R, MAT2016-78903-R and AGL2017-82336-R), the Comunidad de Madrid (project S2018/BAA-4370) the JCyL (project VA317P18), the CIBER-BBN, the JCyL and the Instituto de Salud Carlos III under the “Network Center of Regenerative Medicine and Cellular Therapy of Castilla and Leon”., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

3D silicon doped hydroxyapatite scaffolds decorated with Elastin-like Recombinamers for bone regenerative medicine

  • Vila, Mercedes
  • García, Ana
  • Girotti, Alessandra
  • Alonso, Matilde
  • Rodriguez Cabello, Jose Carlos
  • Gonzalez Vazquez, Arlyng
  • Planell Estany, Josep Anton|||0000-0003-2151-8370
  • Engel López, Elisabeth|||0000-0003-4855-8874
  • Buján, Julia
  • García Honduvilla, Natalio
  • Vallet Regi, Maria
The current study reports on the manufacturing by rapid prototyping technique of three-dimensional (3D) scaffolds based on silicon substituted hydroxyapatite with Elastin-like Recombinamers (ELRs) functionalized surfaces. Silicon doped hydroxyapatite (Si-HA), with Ca10(PO4)5.7(SiO4)0.3(OH)1.7h0.3 nominal formula, was surface functionalized with two different types of polymers designed by genetic engineering: ELR-RGD that contain cell attachment specific sequences and ELR-SNA15/RGD with both hydroxyapatite and cells domains that interact with the inorganic phase and with the cells, respectively. These hybrid materials were subjected to in vitro assays in order to clarify if the ELRs coating improved the well-known biocompatible and bone regeneration properties of calcium phosphates materials. The in vitro tests showed that there was a total and homogeneous colonization of the 3D scaffolds by Bone marrow Mesenchymal Stromal Cells (BMSCs). In addition, the BMSCs were viable and able to proliferate and differentiate into osteoblasts., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

3D silicon doped hydroxyapatite scaffolds decorated with Elastin-like Recombinamers for bone regenerative medicine

  • Vila, Mercedes
  • García, Ana
  • Girotti, Alessandra
  • Alonso, Matilde
  • Rodriguez Cabello, Jose Carlos
  • Gonzalez Vazquez, Arlyng
  • Planell Estany, Josep Anton
  • Engel López, Elisabeth
  • Buján, Julia
  • García Honduvilla, Natalio
  • Vallet Regi, Maria
The current study reports on the manufacturing by rapid prototyping technique of three-dimensional (3D) scaffolds based on silicon substituted hydroxyapatite with Elastin-like Recombinamers (ELRs) functionalized surfaces. Silicon doped hydroxyapatite (Si-HA), with Ca10(PO4)5.7(SiO4)0.3(OH)1.7h0.3 nominal formula, was surface functionalized with two different types of polymers designed by genetic engineering: ELR-RGD that contain cell attachment specific sequences and ELR-SNA15/RGD with both hydroxyapatite and cells domains that interact with the inorganic phase and with the cells, respectively. These hybrid materials were subjected to in vitro assays in order to clarify if the ELRs coating improved the well-known biocompatible and bone regeneration properties of calcium phosphates materials. The in vitro tests showed that there was a total and homogeneous colonization of the 3D scaffolds by Bone marrow Mesenchymal Stromal Cells (BMSCs). In addition, the BMSCs were viable and able to proliferate and differentiate into osteoblasts., Peer Reviewed, Postprint (author's final draft)