Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Confined Sandwichlike Microenvironments Tune Myogenic Differentiation

  • Ballester Beltrán, José
  • Trujillo, Sara
  • Alakpa, Enateri V.
  • Gavara, Rafael
  • Meek, Dominic
  • West, Christopher C.
  • Peault, Bruno
  • Dalby, Matthew J.
  • Salmerón Sánchez, Manuel
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] Sandwichlike (SW) cultures are engineered as a multilayer technology to simultaneously stimulate dorsal and ventral cell receptors, seeking to mimic cell adhesion in three-dimensional (3D) environments in a reductionist manner. The effect of this environment on cell differentiation was investigated for several cell types cultured in standard growth media, which promotes proliferation on two-dimensional (2D) surfaces and avoids any preferential differentiation. First, murine C2C12 myoblasts showed specific myogenic differentiation. Human mesenchymal stem cells (hMSCs) of adipose and bone marrow origin, which can differentiate toward a wider variety of lineages, showed again myodifferentiation. Overall, this study shows myogenic differentiation in normal growth media for several cell types under SW conditions, avoiding the use of growth factors and cytokines, i.e., solely by culturing cells within the SW environment. Mechanistically, it provides further insights into the balance between integrin adhesion to the dorsal substrate and the confinement imposed by the SW system., The support of ERC through HealInSynergy (306990), EPSRC (EP/P001114/1) and FPU program AP2009-3626 are acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Vitronectin alters fibronectin organization at the cell-material interface

  • González García, Cristina
  • Cantini, Marco
  • Altankov, George Petrov
  • Salmerón Sánchez, Manuel
  • Moratal, David|||0000-0002-2825-3646
Cells assemble fibronectin (FN) into fibrils in a process mediated by integrins. For this process to occur, it is known that the presence of other serum proteins is necessary. However, the individual effect of these proteins on FN fibrillogenesis has not been addressed so far. In this study, the effect of vitronectin (VN), an ECM adhesion protein, on material-driven FN fibrillogenesis and cell-mediated FN reorganization is investigated. Poly(ethyl acrylate), PEA, which has previously shown the ability to induce the organization of FN into well-developed physiological-like networks upon adsorption, was employed as a material substrate. FN adsorption, cell adhesion and cellular FN reorganization in the presence or absence of VN were studied. Both FN surface density, quantified via western blot, and its distribution on PEA surfaces, determined via atomic force microscopy, were altered when FN was adsorbed competitively with VN at certain compositions. Moreover, the presence of VN on the material surfaces enhanced cell-mediated FN reorganization and secretion, in comparison with the process which took place in the presence of serum proteins., Support from the European Research Council thorough the 306990 project, call identifier ERC-StG_20111012 is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Maintenance of chondrocyte phenotype during expansion on PLLA microtopographies

  • Costa Martínez, Elisa
  • González García, Cristina
  • Salmerón Sánchez, Manuel
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Articular chondrocytes are difficult to grow, as they lose their characteristic phenotype following expansion on standard tissue culture plates. Here, we show that culturing them on surfaces of poly(L-lactic acid) of well-defined microtopography allows expansion and maintenance of characteristic chondrogenic markers. We investigated the dynamics of human chondrocyte dedifferentiation on the different poly(L-lactic acid) microtopographies by the expression of collagen type I, collagen type II and aggrecan at different culture times. When seeded on poly(L-lactic acid), chondrocytes maintained their characteristic hyaline phenotype up to 7days, which allowed to expand the initial cell population approximately six times without cell dedifferentiation. Maintenance of cell phenotype was afterwards correlated to cell adhesion on the different substrates. Chondrocytes adhesion occurs via the (51) integrin on poly(L-lactic acid), suggesting cell-fibronectin interactions. However, (21) integrin is mainly expressed on the control substrate after 1day of culture, and the characteristic chondrocytic markers are lost (collagen type II expression is overcome by the synthesis of collagen type I). Expanding chondrocytes on poly(L-lactic acid) might be an effective solution to prevent dedifferentiation and improving the number of cells needed for autologous chondrocyte transplantation., The support received from the European Research Council (ERC 306990) and the UK EPSRC (EP/P001114/1) is acknowledged. J.L.G.R. acknowledges support of the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-1 (including the FEDER financial support). CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Programme, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Zinc uptake promotes myoblast differentiation via Zip7 transporter and activation of Akt signalling transduction pathway

  • Mnatsakanyan, Hayk
  • Salmerón Sánchez, Manuel
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Rico Tortosa, Patricia María
[EN] Myogenic regeneration occurs through a chain of events beginning with the output of satellite cells from quiescent state, formation of competent myoblasts and later fusion and differentiation into myofibres. Traditionally, growth factors are used to stimulate muscle regeneration but this involves serious off-target effects, including alterations in cell homeostasis and cancer. In this work, we have studied the use of zinc to trigger myogenic differentiation. We show that zinc promotes myoblast proliferation, differentiation and maturation of myofibres. We demonstrate that this process occurs through the PI3K/Akt pathway, via zinc stimulation of transporter Zip7. Depletion of zinc transporter Zip7 by RNA interference shows reduction of both PI3K/Akt signalling and a significant reduction of multinucleated myofibres and myotubes development. Moreover, we show that mature myofibres, obtained through stimulation with high concentrations of zinc, accumulate zinc and so we hypothesise their function as zinc reservoirs into the cell., P.R. and R.S. acknowledges support from the Spanish Ministry of Economy and Competitiveness (MINECO) (MAT2015-69315-C3-1-R). P.R. acknowledges the Fondo Europeo de Desarrollo Regional (FEDER). CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. R.S. acknowledges the support from the Spanish MECD through the PRX16/00208 grant. MSS acknowledges support from the European Research Council (ERC - HealInSynergy 306990) and the UK Engineering and Physical Sciences Research Council (EPSRC - EP/P001114/1)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Controlled Assembly of Fibronectin Nanofibrils Triggered by Random Copolymer Chemistry

  • MNATSAKANYAN, HAYK
  • Grigoriou, Eleni
  • Maturana Candelas, Aarón
  • Rodrigo Navarro, Aleixandre
  • Salmerón Sánchez, Manuel
  • Rico Tortosa, Patricia María
  • Sabater i Serra, Roser|||0000-0002-5550-7066
Fibronectin fibrillogenesis is the physiological process by which cells elaborate a fibrous FN matrix. Poly(ethyl acrylate), PEA, has been described to induce a similar process upon simple adsorption of fibronectin (FN) from a protein solution-in the absence of cells-leading to the so-called material-driven fibronectin fibrillogenesis. Poly(methyl acrylate), PMA, is a polymer with very similar chemistry to PEA, on which FN is adsorbed, keeping the globular conformation of the protein in solution. We have used radical polymerization to synthesize copolymers with controlled EA/MA ratio, seeking to modulate the degree of FN fibrillogenesis. The physicochemical properties of the system were studied using dynamic mechanical analysis, differential scanning calorimetry, and water contact angle. Both the degree of FN fibrillogenesis and the availability of the integrin binding region of FN directly depend on the percentage of EA in the copolymer, whereas the same total amount of FN was adsorbed regardless the EA/MA ratio. Cell morphology adhesion and differentiation of murine C2C12 were shown to depend on the degree of FN fibrillogenesis previously attained on the material surface. Myogenic differentiation was enhanced on the copolymers with higher EA content, i.e. more interconnected FN fibrils., M.S.S. acknowledges the ERC through HealInSynergy 306990. The support of the project MAT2012-38359-C03-01 (including the FEDER financial support) and well as CIBER-BBN [CIBER de Bioingenieria, Biomateriales y Nanomedicina (CIBER-BBN, promoted by IS CIII), Spain] is acknowledged. We also acknowledge the Electron Microscopy Service of the UPV for AFM support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Engineered microenvironments for synergistic VEGF - Integrin signalling during vascularization

  • Moulisova, Vladimira
  • González García, Cristina
  • Cantini, Marco
  • Rodrigo Navarro, Aleixandre
  • Weaver, Jessica
  • Costell, Mercedes
  • Dalby, Matthew J.
  • García, Andrés J.
  • Salmerón Sánchez, Manuel
  • Sabater i Serra, Roser|||0000-0002-5550-7066
[EN] We have engineered polymer-based microenvironments that promote vasculogenesis both in vitro and in vivo through synergistic integrin-growth factor receptor signalling. Poly(ethyl acrylate) (PEA) triggers spontaneous organization of fibronectin (FN) into nanonetworks which provide availability of critical binding domains. Importantly, the growth factor binding (FNIII12-14) and integrin binding (FNIII9-10) regions are simultaneously available on FN fibrils assembled on PEA. This material platform promotes synergistic integrin/VEGF signalling which is highly effective for vascularization events in vitro with low concentrations of VEGF. VEGF specifically binds to FN fibrils on PEA compared to control polymers (poly(methyl acrylate), PMA) where FN remains in a globular conformation and integrin/GF binding domains are not simultaneously available. The vasculogenic response of human endothelial cells seeded on these synergistic interfaces (VEGF bound to FN assembled on PEA) was significantly improved compared to soluble administration of VEGF at higher doses. Early onset of VEGF signalling (PLC gamma 1 phosphorylation) and both integrin and VEGF signalling (ERK1/2 phosphorylation) were increased only when VEGF was bound to FN nanonetworks on PEA, while soluble VEGF did not influence early signalling. Experiments with mutant FN molecules with impaired integrin binding site (FN-RGE) confirmed the role of the integrin binding site of FN on the vasculogenic response via combined integrin/VEGF signalling. In vivo experiments using 3D scaffolds coated with FN and VEGF implanted in the murine fat pad demonstrated pro-vascularization signalling by enhanced formation of new tissue inside scaffold pores. PEA-driven organization of FN promotes efficient presentation of VEGF to promote vascularization in regenerative medicine applications., The support from the European Research Council (ERC HealInSynergy, 306990), the UK Medical Research Council (MR/L022710/1) and IOF-Marie Curie fellowship program (Protdel 331655) are acknowledged. RSS and MC acknowledge funding from MINECO-Spain through MAT2015-69315 (including FEDER funds). AJG acknowledges support from the NIH (R01 AR062368 and R01 AR062920).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A fractal nature for polymerized laminin

  • Hochman Méndez, Carlos
  • Cantini ., Marco
  • Salmerón Sánchez, Manuel
  • Coelho-Sampaio, Tatiana
  • Moratal, David|||0000-0002-2825-3646
Polylaminin (polyLM) is a non-covalent acid-induced nano- and micro-structured polymer of the protein laminin displaying distinguished biological properties. Polylaminin stimulates neuritogenesis beyond the levels achieved by ordinary laminin and has been shown to promote axonal regeneration in animal models of spinal cord injury. Here we used confocal fluorescence microscopy (CFM), scanning electron microscopy (SEM) and atomic force microscopy (AFM) to characterize its three-dimensional structure. Renderization of confocal optical slices of immunostained polyLM revealed the aspect of a loose flocculated meshwork, which was homogeneously stained by the antibody. On the other hand, an ordinary matrix obtained upon adsorption of laminin in neutral pH (LM) was constituted of bulky protein aggregates whose interior was not accessible to the same anti-laminin antibody. SEM and AFM analyses revealed that the seed unit of polyLM was a flat polygon formed in solution whereas the seed structure of LM was highly heterogeneous, intercalating rod-like, spherical and thin spread lamellar deposits. As polyLM was visualized at progressively increasing magnifications, we observed that the morphology of the polymer was alike independently of the magnification used for the observation. A search for the Hausdorff dimension in images of the two matrices showed that polyLM, but not LM, presented fractal dimensions of 1.55, 1.62 and 1.70 after 1, 8 and 12 hours of adsorption, respectively. Data in the present work suggest that the intrinsic fractal nature of polymerized laminin can be the structural basis for the fractal-like organization of basement membranes in the neurogenic niches of the central nervous system., This work was supported by a grant from the Brazilian National Research Council (CNPq; 476772/2008-7) to TCS. MSS acknowledges support from the European Research Council through ERC - 306990. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Simultaneous boron ion-channel/growth factor receptor activation for enhanced vascularization

  • Rico Tortosa, Patricia María
  • La Peña Del Rivero, Marcos De|||0000-0002-7949-8459
  • Rodrigo Navarro, Aleixandre
  • Moulisova, Vladimira
  • Costell, Mercedes
  • Salmerón Sánchez, Manuel
[EN] Boron ion is essential in metabolism and its concentration is regulated by ion-channel NaBC1. NaBC1 mutations cause corneal dystrophies such as Harboyan syndrome. Here we propose a 3D molecular model for NaBC1 and show that simultaneous stimulation of NaBC1 and vascular growth factor receptors (VEGFR) promote angiogenesis in vitro and in vivo with ultra-low concentrations of VEGF. We show Human Umbilical Vein Endothelial Cells (HUVEC) organization into tubular structures indicative of vascularization potential. Enhanced cell sprouting was found only in the presence of VEGF and boron, effect abrogated after blocking NaBC1. We demonstrate that stimulated NaBC1 promotes angiogenesis via PI3k-independent pathways and that ¿5ß1/¿vß3-integrin binding is not essential to enhanced HUVEC organization. We describe a novel vascularization mechanism that involves the crosstalk and colocalization between NaBC1/VEGFR receptors. This has important translational consequences: just by administering boron, taking advantage of endogenous VEGF, in vivo vascularization is shown in a chorioallantoic membrane assay., P.R. acknowledges support from the Ministerio de Economia, Industria y Competitividad, Gobierno de Espana (MINECO) (MAT2015-69315-C3-1-R), and European Regional Development Fund (FEDER). CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. M. S. S. acknowledges support from the European Research Council (ERC-HealInSynergy 306990) and the UK Engineering and Physical Sciences Research Council (EPSRC-EP/P001114/1). The authors are very grateful to Productos Florida farm for kindly providing chick embryos for CAM assay.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Living biointerfaces based on non-pathogenic bacteria to direct cell differentiation

  • Rodrigo Navarro, Aleixandre
  • Saadeddin Saadeddin, Anas
  • Garcia, Andres J.
  • Salmerón Sánchez, Manuel
  • Rico Tortosa, Patricia María
Genetically modified Lactococcus lactis, non-pathogenic bacteria expressing the FNIII7-10 fibronectin fragment as a protein membrane have been used to create a living biointerface between synthetic materials and mammalian cells. This FNIII7-10 fragment comprises the RGD and PHSRN sequences of fibronectin to bind a5b1 integrins and triggers signalling for cell adhesion, spreading and differentiation. We used L. lactis strain to colonize material surfaces and produce stable biofilms presenting the FNIII7-10 fragment readily available to cells. Biofilm density is easily tunable and remains stable for several days. Murine C2C12 myoblasts seeded over mature biofilms undergo bipolar alignment and form differentiated myotubes, a process triggered by the FNIII7-10 fragment. This biointerface based on living bacteria can be further modified to express any desired biochemical signal, establishing a new paradigm in biomaterial surface functionalisation for biomedical applications., The support from ERC through HealInSynergy 306990 is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Robust fabrication of electrospun-like polymer mats to direct cell behaviour

  • Ballester Beltrán, José
  • Lebourg., Myriam Madeleine
  • Capella Monsonís, Héctor
  • Díaz Lantada, Andrés
  • Salmerón Sánchez, Manuel
Currently, cell culture systems that include nanoscale topography are widely used in order to provide cells additional cues closer to the in vivo environment, seeking to mimic the natural extracellular matrix. Electrospinning is one of the most common techniques to produce nanofiber mats. However, since many sensitive parameters play an important role in the process, a lack of reproducibility is a major drawback. Here we present a simple and robust methodology to prepare reproducible electrospun-like samples. It consists of a polydimethylsiloxane mold reproducing the fiber pattern to solvent-cast a polymer solution and obtain the final sample. To validate this methodology, poly( L-lactic) acid ( PLLA) samples were obtained and, after characterisation, bioactivity and ability to direct cell response were assessed. C2C12 myoblasts developed focal adhesions on the electrospun-like fibers and, when cultured under myogenic differentiation conditions, similar differentiation levels to electrospun PLLA fibers were obtained., The support of ERC through HealInSynergy (306990) and FPU program AP2009-3626 is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Gelatin-Hyaluronic Acid Hydrogels with Tuned Stiffness to Counterbalance Cellular Forces and Promote Cell Differentiation

  • Poveda Reyes, Sara
  • Moulisova, Vladimira
  • Sanmartín Masiá, Esther del Rosario
  • Quintanilla-Sierra, Luis
  • Salmerón Sánchez, Manuel
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Cells interact mechanically with their environment, exerting mechanical forces that probe the extracellular matrix (ECM). The mechanical properties of the ECM determine cell behavior and control cell differentiation both in 2D and 3D environments. Gelatin (Gel) is a soft hydrogel into which cells can be embedded. This study shows significant 3D Gel shrinking due to the high traction cellular forces exerted by the cells on the matrix, which prevents cell differentiation. To modulate this process, Gel with hyaluronic acid (HA) has been combined in an injectable crosslinked hydrogel with controlled Gel-HA ratio. HA increases matrix stiffness. The addition of small amounts of HA leads to a significant reduction in hydrogel shrinking after cell encapsulation (C2C12 myoblasts). We show that hydrogel stiffness counterbalanced traction forces of cells and this was decisive in promoting cell differentiation and myotube formation of C2C12 encapsulated in the hybrid hydrogels., The authors are grateful for the financial support received from the Spanish Ministry through the MAT2013-46467-C4-1-R project (including the FEDER financial support), the BES-2011-046144, and the EEBB-I-14-08725 grants. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. M.S.S. acknowledges ERC through HealInSynergy 306990.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hybrid Protein-Glycosaminoglycan Hydrogels Promote Chondrogenic Stem Cell Differentiation

  • Moulisova, Vladimira
  • Poveda-Reyes, Sara
  • Sanmartin-Masia, Esther
  • Quintanilla-Sierra, Luis
  • Salmerón Sánchez, Manuel
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Gelatin-hyaluronic acid (Gel-HA) hybrid hydrogels have been proposed as matrices for tissue engineering because of their ability to mimic the architecture of the extracellular matrix. Our aim was to explore whether tyramine conjugates of Gel and HA, producing injectable hydrogels, are able to induce a particular phenotype of encapsulated human mesenchymal stem cells without the need for growth factors. While pure Gel allowed good cell adhesion without remarkable differentiation and pure HA triggered chondrogenic differentiation without cell spreading, the hybrids, especially those rich in HA, promoted chondrogenic differentiation as well as cell proliferation and adhesion. Secretion of chondrogenic markers such as aggrecan, SOX-9, collagen type II, and glycosaminoglycans was observed, whereas osteogenic, myogenic, and adipogenic markers (RUNX2, sarcomeric myosin, and lipoproteinlipase, respectively) were not present after 2 weeks in the growth medium. The most promising matrix for chondrogenesis seems to be a mixture containing 70% HA and 30% Gel as it is the material with the best mechanical properties from all compositions tested here, and at the same time, it provides an environment suitable for balanced cell adhesion and chondrogenic differentiation. Thus, it represents a system that has a high potential to be used as the injectable material for cartilage regeneration therapies., The authors are grateful for the financial support received from the Spanish Ministry through the MAT2016-76039-C4-1-R project (including the FEDER financial support), the BES-2011-046144, and the EEBB-I-14-08725 grants. The CIBER-BBN initiative is funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. M.S.-S. acknowledges the European Research Council (ERC-HealInSynergy 306990) and the UK Engineering and Physical Sciences Research Council (EPSRC-EP/P001114/1)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dorsal and ventral stimuli in sandwich-like microenvironments. Effect on cell differentiation

  • Ballester Beltrán, José
  • Lebourg, Myriam Madeleine
  • Salmerón Sánchez, Manuel
While most of the in vivo extracellular matrices are 3D, most of the in vitro cultures are 2D--where only ventral adhesion is permitted--thus modifying cell behavior as a way to self-adaptation to this unnatural environment. We hypothesize that the excitation of dorsal receptors in cells already attached on a 2D surface (sandwich culture) could cover the gap between 2D and 3D cell-material interactions and result in a more physiological cell behavior. In this study we investigate the role of dorsal stimulation on myoblast differentiation within different poly(L-lactic acid) (PLLA) sandwich-like microenvironments, including plain material and aligned fibers. Enhanced cell differentiation levels were found for cells cultured with dorsal fibronectin-coated films. Seeking to understand the underlying mechanisms, experiments were carried out with (i) different types of dorsal stimuli (FN, albumin, FN after blocking the RGD integrin-binding site and activating dorsal cell integrin receptors), (ii) in the presence of an inhibitor of cell contractility, and (iii) increasing the frequency of culture medium changes to assess the effect of paracrine factors. Furthermore, FAK and integrin expressions, determined by Western blotting, revealed differences between cell sandwiches and 2D controls. Results show a stimuli-dependent response to dorsal excitation, proving that integrin outside-in signaling is involved in the enhanced cell differentiation. Due to their easiness and versatility, these sandwich-like systems are excellent candidates to get deeper insights into the study of 3D cell behavior and to direct cell fate within multilayer constructs., Contract grant sponsor: ERC - 306990
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Role of chemical crosslinking in material-driven assembly offibronectin (nano)networks: 2D surfaces and 3D scaffolds

  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
  • León-Boigues, Laia
  • Sánchez Laosa, Antonio
  • Gómez Estrada, Luis
  • Salmerón Sánchez, Manuel
Poly(ethyl acrylate) (PEA) induces the formation of biomimetic fibronectin (FN) (nano)networks uponsimple adsorption from solutions, a process referred to as material-driven FN fibrillogenesis. The ability ofPEA to organize FN has been demonstrated in 2D and 2.5D environments, but not as yet in 3D scaffolds,which incorporate three-dimensionality and chemical crosslinkers that may influence its fibrillogenicpotential. In this paper we show for the first time that while three-dimensionality does not interferewith PEA-induced FN fibrillogenesis, crosslinking does, and we determined the maximum amount ofcrosslinker that can be added to PEA to maintain FN fibrillogenesis. For this, we synthesised 2D substrateswith different amounts of crosslinker (1 10% of ethylene glycol dimethacrylate) and studied the role ofcrosslinking in FN organization using AFM. The glass transition temperature was seen to increase withcrosslinking density and, accordingly, polymer segmental mobility was reduced. The organization ofFN after adsorption (formation of FN fibrils) and the availability of the FN cell-binding domain werefound to be dependent on crosslinking density. Surface mobility was identified as a key parameter for FNsupramolecular organization. PEA networks with up to 2% crosslinker organize the FN in a similar way tonon-crosslinked PEA. Scaffolds prepared with 2% crosslinker also had FN (nano)networks assembled ontheir walls, showing PEA s ability to induce FN fibrillogenesis in 3D environments as long as the amountsof crosslinker is low enough., M.S.S. acknowledges funding from ERC (HealInSynergy 306990) and the UK MRC (MR/L022710/1). The support from the Ministry of Economy and Competitiveness-Spain (MAT2015-69315-C3-1-R Project) including the FEDER financial support, is gratefully acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. We are also grateful to the Electron Microscopy Service of Universitat Politecnica de Valencia for their valuable help.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fibronectin-matrix sandwich-like microenvironments to manipulate cell fate

  • Ballester Beltrán, José
  • Lebourg, Myriam Madeleine
  • Salmerón Sánchez, Manuel
  • Moratal, David|||0000-0002-2825-3646
[EN] Conventional 2D substrates fail to represent the natural environment of cells surrounded by the 3D extracellular matrix (ECM). We have proposed sandwich-like microenvironments as a versatile tool to study cell behaviour under quasi-3D conditions. This is a system that provides a broad range of dorsal and ventral independent spatio-temporal stimuli. Here, we use this sandwich technology to address the role of dorsal stimuli in cell adhesion, cell proliferation and ECM reorganisation. Under certain conditions, dorsal stimuli within sandwich microenvironments prevent the formation of focal plaques as well as the development of the actin cytoskeleton, whereas alpha(5) versus alpha(v) integrin expression is increased compared to the corresponding 2D controls. Cell signaling is similarly enhanced after dorsal stimuli (measured by the pFAK/FAK level) for cells sandwiched after 3 h of 2D ventral adhesion, but not when sandwiched immediately after cell seeding (similar levels to the 2D control). Cell proliferation, studied by the 5-bromo-2-deoxyuridine (BrdU) incorporation assay, was significantly reduced within sandwich conditions as compared to 2D substrates. In addition, these results were found to depend on the ability of cells to reorganise the dorsal layer of proteins at the material interface, which could be tuned by adsorbing FN on material surfaces that results in a qualitatively different conformation and distribution of FN. Overall, sandwich-like microenvironments switch cell behaviour (cell adhesion, morphology and proliferation) towards 3D-like patterns, demonstrating the importance of this versatile, simple and robust approach to mimic cell microenvironments in vivo., The support from ERC through HealInSynergy (306990) and the FPU program AP2009-3626 are acknowledged.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Molecular clutch drives cell response to surface viscosity

  • Bennett, Mark
  • Cantini, Marco
  • Reboud, Julien
  • Cooper, Jonathan M.
  • Roca-Cusachs Soulere, Pere
  • Salmeron-Sanchez, Manuel
Cell response to matrix rigidity has been explained by the mechanical properties of the actin-talin-integrin-fibronectin clutch. Here the molecular clutch model is extended to account for cell interactions with purely viscous surfaces (i.e., without an elastic component). Supported lipid bilayers present an idealized and controllable system through which to study this concept. Using lipids of different diffusion coefficients, the mobility (i.e., surface viscosity) of the presented ligands (in this case RGD) was altered by an order of magnitude. Cell size and cytoskeletal organization were proportional to viscosity. Furthermore, there was a higher number of focal adhesions and a higher phosphorylation of FAK on less-mobile (more-viscous) surfaces. Actin retrograde flow, an indicator of the force exerted on surfaces, was also seen to be faster on more mobile surfaces. This has consequential effects on downstream molecules; the mechanosensitive YAP protein localized to the nucleus more on less-mobile (more-viscous) surfaces and differentiation of myoblast cells was enhanced on higher viscosity. This behavior was explained within the framework of the molecular clutch model, with lower viscosity leading to a low force loading rate, preventing the exposure of mechanosensitive proteins, and with a higher viscosity causing a higher force loading rate exposing these sites, activating downstream pathways. Consequently, the understanding of how viscosity (regardless of matrix stiffness) influences cell response adds a further tool to engineer materials that control cell behavior.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Different Organization of Type I Collagen Immobilized on Silanized and Nonsilanized Titanium Surfaces Affects Fibroblast Adhesion and Fibronectin Secretion

  • Marín Pareja, Nathalia
  • Cantini, Marco
  • Gonzalez Garcia, Cristina
  • Salvagni, Emiliano
  • Salmerón-Sánchez, Manuel
  • Ginebra Molins, Maria Pau|||0000-0002-4700-5621
Silanization has emerged in recent years as a way to obtain a stronger and more stable attachment of biomolecules to metallic substrates. However, its impact on protein conformation, a key aspect that influences cell response, has hardly been studied. In this work, we analyzed by atomic force microscopy (AFM) the distribution and conformation of type I collagen on plasma-treated surfaces before and after silanization. Subsequently, we investigated the effect of the different collagen conformations on fibroblasts adhesion and fibronectin secretion by immunofluorescence analyses. Two different organosilanes were used on plasma-treated titanium surfaces, either 3-chloropropyl-triethoxy-silane (CPTES) or 3-glycidyloxypropyltriethoxy-silane (GPTES). The properties and amount of the adsorbed collagen were assessed by contact angle, X-ray photoelectron spectroscopy, optical waveguide lightmode spectroscopy, and AFM. AFM studies revealed different conformations of type I collagen depending on the silane employed. Collagen was organized in fibrillar networks over very hydrophilic (plasma treated titanium) or hydrophobic (silanized with CPTES) surfaces, the latter forming little globules with a beads-on-a-string appearance, whereas over surfaces presenting an intermediate hydrophobic character (silanized with GPTES), collagen was organized into clusters with a size increasing at higher protein concentration in solution. Cell response was strongly affected by collagen conformation, especially at low collagen density. The samples exhibiting collagen organized in globular clusters (GPTES-functionafized samples) favored a faster and better fibroblast adhesion as well as better cell spreading, focal adhesions formation, and more pronounced fibronectin fibrillogenesis. In contrast, when a certain protein concentration was reached at the material surface, the effect of collagen conformation was masked, and similar fibroblast response was observed in all samples., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Molecular clutch drives cell response to surface viscosity

  • Bennett, Mark
  • Cantini, Marco
  • Reboud, Julien
  • Cooper, Jonathan M.
  • Roca-Cusachs Soulere, Pere
  • Salmeron-Sanchez, Manuel
Cell response to matrix rigidity has been explained by the mechanical properties of the actin-talin-integrin-fibronectin clutch. Here the molecular clutch model is extended to account for cell interactions with purely viscous surfaces (i.e., without an elastic component). Supported lipid bilayers present an idealized and controllable system through which to study this concept. Using lipids of different diffusion coefficients, the mobility (i.e., surface viscosity) of the presented ligands (in this case RGD) was altered by an order of magnitude. Cell size and cytoskeletal organization were proportional to viscosity. Furthermore, there was a higher number of focal adhesions and a higher phosphorylation of FAK on less-mobile (more-viscous) surfaces. Actin retrograde flow, an indicator of the force exerted on surfaces, was also seen to be faster on more mobile surfaces. This has consequential effects on downstream molecules; the mechanosensitive YAP protein localized to the nucleus more on less-mobile (more-viscous) surfaces and differentiation of myoblast cells was enhanced on higher viscosity. This behavior was explained within the framework of the molecular clutch model, with lower viscosity leading to a low force loading rate, preventing the exposure of mechanosensitive proteins, and with a higher viscosity causing a higher force loading rate exposing these sites, activating downstream pathways. Consequently, the understanding of how viscosity (regardless of matrix stiffness) influences cell response adds a further tool to engineer materials that control cell behavior.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Different Organization of Type I Collagen Immobilized on Silanized and Nonsilanized Titanium Surfaces Affects Fibroblast Adhesion and Fibronectin Secretion

  • Marín Pareja, Nathalia
  • Cantini, Marco
  • Gonzalez Garcia, Cristina
  • Salvagni, Emiliano
  • Salmerón-Sánchez, Manuel
  • Ginebra Molins, Maria Pau
Silanization has emerged in recent years as a way to obtain a stronger and more stable attachment of biomolecules to metallic substrates. However, its impact on protein conformation, a key aspect that influences cell response, has hardly been studied. In this work, we analyzed by atomic force microscopy (AFM) the distribution and conformation of type I collagen on plasma-treated surfaces before and after silanization. Subsequently, we investigated the effect of the different collagen conformations on fibroblasts adhesion and fibronectin secretion by immunofluorescence analyses. Two different organosilanes were used on plasma-treated titanium surfaces, either 3-chloropropyl-triethoxy-silane (CPTES) or 3-glycidyloxypropyltriethoxy-silane (GPTES). The properties and amount of the adsorbed collagen were assessed by contact angle, X-ray photoelectron spectroscopy, optical waveguide lightmode spectroscopy, and AFM. AFM studies revealed different conformations of type I collagen depending on the silane employed. Collagen was organized in fibrillar networks over very hydrophilic (plasma treated titanium) or hydrophobic (silanized with CPTES) surfaces, the latter forming little globules with a beads-on-a-string appearance, whereas over surfaces presenting an intermediate hydrophobic character (silanized with GPTES), collagen was organized into clusters with a size increasing at higher protein concentration in solution. Cell response was strongly affected by collagen conformation, especially at low collagen density. The samples exhibiting collagen organized in globular clusters (GPTES-functionafized samples) favored a faster and better fibroblast adhesion as well as better cell spreading, focal adhesions formation, and more pronounced fibronectin fibrillogenesis. In contrast, when a certain protein concentration was reached at the material surface, the effect of collagen conformation was masked, and similar fibroblast response was observed in all samples., Peer Reviewed, Postprint (author's final draft)