Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 46
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A theoretical study of the Pnma and R3m phases of Sb2S3, Bi2S3, and Sb2Se3

  • Da Silva, Estelina Lora
  • Skelton, J. M.
  • Rodríguez-Hernández, P.
  • Muñoz, A.
  • Santos, M. C.
  • Martínez-García, D.
  • Vilaplana Cerda, Rosario Isabel|||0000-0003-0504-2157
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
[EN] We report a comparative theoretical study of the Pnma and R3m phases of Sb2S3, Bi2S3, and Sb2Se3 close to ambient pressure. Our enthalpy calculations at 0 K show that at ambient pressure the R3m (tetradymite-like) phase of Sb2Se3 is energetically more stable than the Pnma phase, contrary to what is observed for Sb2S3 and Bi2S3, and irrespective of the exchange-correlation functional employed in the calculations. The result for Sb2Se3 is in contradiction to experiments in which all three compounds are usually grown in the Pnma phase. This result is further confirmed by free-energy calculations taking into account the temperature dependence of unit-cell volumes and phonon frequencies. Lattice dynamics and elastic tensor calculations further show that both the Pnma and R3m phases of Sb2Se3 are dynamically and mechanically stable at zero applied pressure. Since these results suggest that the formation of the R3m phase of Sb2Se3 should be feasible under close to ambient conditions, we provide a theoretical crystal structure and simulated Raman and infrared spectra to help in its identification. We also discuss the results of the two published works that have claimed to have synthesized tetradymite-like Sb2Se3. Finally, the stability of the R3m phase across the three group-15 A(2)X(3) sesquichalcogenides is analysed based on their van der Waals gap and X-X in-plane geometry., This publication is part of the MALTA Consolider Team network (RED2018-102612-T) (MINECO/AEI/10.13039/501100003329), and is supported by I + D + i project PID2019-106383GB41/42/43 (MCIN/AEI/10.13039/501100011033), by the PROMETEO/2018/123(EFIMAT) and CIPROM/2021/075 (GREENMAT) projects (Generalitat Valenciana), and by the European Union Horizon 2020 research and innovation programme under a Marie Sklodowska-Curie grant agreement (785789-COMEX). E. L. d. S., A. M., and P. R.-H. acknowledge computing time provided on the MALTA-Cluster at the University of Oviedo and on the MareNostrum facility through Red Espanola de Supercomputacion (RES) with technical support provided by the Barcelona Supercomputing Center (QCM-2018-3-0032). E. L. d. S. also acknowledges the Network of Extreme Conditions Laboratories (NECL), financed by FCT and co-financed by NORTE 2020 through the Portugal 2020 and FEDER programmes. J. M. S. is grateful to UK Research and Innovation for the support of a Future Leaders Fellowship (MR/T043121/1) and to the University of Manchester for the previous support of a Presidential Fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Engineered 3D hydrogels with full-length fibronectin that sequester and present growth factors

  • Trujillo-Muñoz, Sara
  • González-García, Cristina
  • Reid, Andrew
  • Windmill, James
  • Dalby, Matthew J.
  • Salmerón Sánchez, Manuel
  • Rico Tortosa, Patricia María
[EN] Extracellular matrix (ECM)-derived matrices such as Matrigel are used to culture numerous cell types in vitro as they recapitulate ECM properties that support cell growth, organisation, migration and differentiation. These ECM-derived matrices contain various growth factors which make them highly bioactive. However, they suffer lot-to-lot variability, undefined composition and lack of controlled physical properties. There is a need to develop rationally designed biomaterials that can also recapitulate ECM roles. Here, we report the development of fibronectin (FN)-based 3D hydrogels of controlled stiffness and degradability that incorporate full-length FN to enable solid-phase presentation of growth factors in a physiological manner. We demonstrate, in vitro and in vivo, the effect of incorporating vascular endothelial growth factor (VEGF) and bone morphogenetic protein 2 (BMP2) in these hydrogels to enhance angiogenesis and bone regeneration, respectively. These hydrogels represent a step-change in the design of well-defined, reproducible, synthetic microenvironments for 3D cell culture that incorporate growth factors to achieve functional effects., This study was supported by the UK Regenerative Medicine Platform (MRC grant MR/L022710/1), the UK Engineering and Physical Sciences Research Council (EPSRC EP/P001114/1) and a programme grant from the Sir Bobby Charlton Foundation. mu CT work was supported by the European Research Council (ERC) under the European Union's Seventh Framework Programme (FP7/2007-2013) (grant agreement No. [615030]). S.T. acknowledges support from the University of Glasgow through their internal scholarship funding program. We thank the support of David Adams (Anatomy lab, University of Glasgow) and the Biological Services and Veterinary Research Facility (University of Glasagow) for their assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Two-Photon Probe Based on Naphthalimide-Styrene Fluorophore for the In Vivo Tracking of Cellular Senescence

  • Lozano-Torres, Beatriz
  • Blandez, Juan F.
  • Galiana, Irene
  • Lopez-Dominguez, Jose Alberto
  • Rovira, Miguel
  • Páez-Ribes, Marta
  • González-Gualda, Estela
  • Muñoz-Espín, Daniel
  • Serrano, Manuel
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
[EN] Cellular senescence is a state of stable cell cycle arrest that can negatively affect the regenerative capacities of tissues and can contribute to inflammation and the progression of various aging-related diseases. Advances in the in vivo detection of cellular senescence are still crucial to monitor the action of senolytic drugs and to assess the early onset or accumulation of senescent cells. Here, we describe a naphthalimide-styrene-based probe (HeckGal) for the detection of cellular senescence both in vitro and in vivo. HeckGal is hydrolyzed by the increased lysosomal beta-galactosidase activity of senescent cells, resulting in fluorescence emission. The probe was validated in vitro using normal human fibroblasts and various cancer cell lines undergoing senescence induced by different stress stimuli. Remarkably, HeckGal was also validated in vivo in an orthotopic breast cancer mouse model treated with senescence-inducing chemotherapy and in a renal fibrosis mouse model. In all cases, HeckGal allowed the unambiguous detection of senescence in vitro as well as in tissues and tumors in vivo. This work is expected to provide a potential technology for senescence detection in aged or damaged tissues., R.M. laboratory members thank the financial support from the Spanish Government (project RTI2018-100910-B-C41) and the Generalitat Valenciana (project PROMETEO 2018/024). B.L.-T. is grateful to the Spanish Ministry of Economy for their PhD grants (FPU15/02707). I.G. thanks her contract from IDM. J.F.-B. thanks to his postdoctoral fellowship (CD19/00038). J.A.L.-D. thanks the financial support from the Ministry of Science/MICINN (IJCI-2017-33047). Work in the laboratory of M.S. was funded by the IRB and by grants from the Spanish Ministry of Economy cofunded by the European Regional Development Fund (ERDF) (SAF201348256-R), the European Research Council (ERC-2014-AdG/669622), and the "laCaixa" Foundation. The D.M.-E. laboratory is supported by the Cancer Research U.K. (CRUK), Cambridge Centre Early Detection Programme, by a CRUK Early Detection OHSU project award (C62187/A26989), by a Medical Research Council (MRC) New Investigators Research Grant (NIRG, MR/R000530/1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Engineered living biomaterials

  • Rodrigo-Navarro, Aleixandre
  • Sankaran, Shrikrishnan
  • Dalby, Matthew J.
  • del Campo, Aránzazu
  • Salmerón Sánchez, Manuel
[EN] Biomaterials have evolved from inert materials that lack interaction with the body to biologically active, instructive materials that host and provide signals to surrounding cells and tissues. Engineered living materials contain living cells (responsive function) and polymeric matrices (scaffolding function) and, thus, can be designed as active and response biomaterials. In this Review, we discuss engineered living materials that incorporate microorganisms as the living, bioactive component. Microorganisms can provide complex responses to environmental stimuli, and they can be genetically engineered to allow user control over responses and integration of numerous inputs. The engineered microorganisms can either generate their own matrix, such as in biofilms, or they can be incorporated in matrices using various technologies, such as coating, 3D printing, spinning and microencapsulation. We highlight biomedical applications of such engineered living materials, including biosensing, wound healing, stem-cell-based tissue engineering and drug delivery, and provide an outlook to the challenges and future applications of engineered living materials., Support from EPSRC through a programme grant (EP/P001114/1) is acknowledged. M.S.-S. and M.J.D acknowledge support from a grant from the UK Regenerative Medicine Platform "Acellular/Smart Materials - 3D Architecture" (MR/R015651/1). S.S. and A.d.C. acknowledge support from the Deutsche Forschungsgemeinschaft's Collaborative Research Centre, SFB 1027 and the Leibniz Science Campus on Living Therapeutic Materials, LifeMat.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Pressure-Driven Reactivity in Dense Methane-Nitrogen Mixtures

  • Shuttleworth, Hannah A.
  • Kuzovnikov, Mikhail A.
  • Conway, Lewis J.
  • Hu, Huixin
  • Yan, Jinwei
  • Osmond, Israel
  • Marqueño, Tomás
  • Hanfland, Michael
  • Laniel, Dominique
  • Gregoryanz, Eugene
  • Hermann, Andreas
  • Peña-Álvarez, Miriam
  • Howie, Ross T.
  • Gallego-Parra, Samuel|||0000-0001-6516-4303
[EN] Carbon, nitrogen, and hydrogen are among the most abundant elements in the solar system, and our understanding of their interactions is fundamental to prebiotic chemistry. CH4 and N2 are the simplest archetypical molecules formed by these elements and are both markedly stable under extremes of pressure. Through a series of diamond anvil cell experiments supported by density functional theory calculations, we observe diverse compound formation and reactivity in the CH4-N2 binary system at high pressure. Above 7 GPa two concentration-dependent molecular compounds emerge, (CH4)5N2 and (CH4)7(N2)8, held together by weak van der Waals interactions. Strikingly, further compression at room temperature irreversibly breaks the N2 triple bond, inducing the dissociation of CH4 above 140 GPa, with the near-quenched samples revealing distinct spectroscopic signatures of strong covalently bonded C-N-H networks. High temperatures vastly reduce the required pressure to promote the reactivity between CH4 and N2, with NH3 forming together with longer-chain hydrocarbons at 14 GPa and 670 K, further decomposing into powdered diamond when temperatures exceed 1200 K. These results exemplify how pressure-driven chemistry can cause unexpected complexity in the most simple molecular precursors., Dr. Ross T. Howie acknowledges that the project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program (Grant Agreement 948895 "MetElOne"). Dr. Miriam Pena-Alvarez and Dr. Dominique Laniel acknowledge the support of the UK Research and Innovation (UKRI) Future Leaders Fellowship (Mrc-Mr/T043733/1 and MR/V025724/1, respectively). The authors thank Dr. Mengan Wang for assistance in data analysis, and Ms Zena Younes for useful discussions. We acknowledge the European Synchrotron Radiation Facility (ESRF) for the provision of synchrotron radiation facilities at beamline ID15B under proposal HC-5261. We acknowledge DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, for the provision of experimental facilities. Parts of this research were carried out at PETRA-III P02.2 and we would like to thank Dr. Konstantin Glazyrin for assistance. Beamtime was allocated for proposal I-20221366. Parts of the synchrotron radiation experiments were performed at BL10XU of SPring-8 with the approval of the Japan Synchrotron Radiation Research Institute (JASRI) (Proposal No. 2023B1420). Part of the study was performed at I15, Diamond Light Source (Didcot, UK) under proposal CY30698-1. We are grateful for computational support from the UK national high-performance computing service, ARCHER2, for which access was obtained via the UKCP consortium and funded by EPSRC grant ref EP/X035891/1. For open access, the author has applied a Creative Commons Attribution (CC BY) license to any Author Accepted Manuscript version arising from this submission.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sensitivity of the Hyper-Kamiokande experiment to neutrino oscillation parameters using accelerator neutrinos

  • Abe, K.
  • Afif, M. T.
  • Ahl Laamara, R.
  • Aihara, H.
  • Ajmi, A.
  • Akutsu, R.
  • Alarakia-Charles, H.
  • Hakim, Y. Alj
  • Alonso Monsalve, S.
  • Amato, E.
  • Ameli, F.
  • Anthony, L.
  • Araya, A.
  • Arguello Quiroga, A.
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] This paper presents the expected sensitivity to the neutrino oscillation parameters of the Hyper-Kamiokande long-baseline program. The Hyper-Kamiokande experiment, currently under construction in Japan, will measure the oscillations of accelerator-produced neutrinos with thousands of selected events per sample: this corresponds to an increase of statistics of a factor 25-100 with respect to recent results from the currently-running long-baseline neutrino oscillation experiment in Japan, T2K. In the most favorable scenario we will achieve the discovery of Charge-Parity (CP) violation in neutrino oscillation at 5 sigma C.L. in less than 3 years. With 10 years of data-taking, and assuming a neutrino : antineutrino beam running ratio of 1:3, a CP violation discovery at 5s C.L. is possible for more than 60% of the actual values of theCP-violating phase, delta(CP). Moreover, we will measure dCP with a precision ranging from 20., in the case of maximal CP violation, to 6 degrees, in the case of CP conservation. We aim to achieve a 0.5% resolution on the Delta m(32)(2) parameter, and a resolution between 3% and 0.5% on the sin(2)sigma(23) parameter, depending on its true value. These results are obtained by extending the analysis methods of T2K with dedicated tuning to take into account the Hyper-Kamiokande design: the larger far detector, the more powerful beam, the upgraded near detector ND280, and the planned additional Intermediate Water Cherenkov Detector., The Hyper-Kamiokande Collaboration would like to thank the Japanese Ministry of Education, Culture, Sports, Science and Technology (MEXT), the University of Tokyo, Japan Society for the Promotion of Science (JSPS), the Kamioka Mining and Smelting Company, Japan; the Minister of Education, Science, Culture and Sports, grant 21T-1C333, Armenia; CNPq and CAPES, Brazil; Ministry of Education Youth and Sports of the Czech Republic (FORTE CZ.02.01.01/00/22_008/0004632); CEA and CNRS/IN2P3, France; the INFN, Italy; the National Science Foundation, the Korea NationalResearch Foundation (No. NRF2022R1A3B1078756), Korea; CONAHCyT for supporting the national projects CBF2023-2024427, and CF-2023-G-643., Mexico; Ministry of Science and Higher Education (2022/WK/15) and the National Science Centre (UMO2022/46/E/ST2/00336), Poland; MICIU, Spain andNextGenerationEU/PRTR, EU, Spain; ETHZ, SERI and SNSF, Switzerland; STFC and UKRI, UK. We also thank CERN for use of the Neutrino Platform. In addition, the participation of individual researchers and institutions has been further supported by funds from Charles University (Grant PRIMUS 23/SCI/025 and Research Center UNCE/24/SCI/016), Czech Republic; H2020-MSCA-RISE-2019 SK2HK no 872549 and H2020 Grant No. RISE-GA822070-JENNIFER2 2020, Europe; JSPS KAKENHI Grant JP24K17065; National Research Foundation of Korea (NRF-2022R1A5A1030700, NRF-2022R1A3B1078756) funded by the Ministry of Science, Information and Communication Technology (ICT) and the Ministry of Education (RS-2024-00442775), Korea; AssociateDean of Research and Scientific Graduate Studies, Dr. Daniel A. Jacobo-Velazquez, for his support and also to CONAHCyT for the postgraduate scholarship 835328; Rector of the CUCEI, Dr. Marcos Perez, for his financial and logistical support and CONAHCyT for the information technologies doctoral scholarship 792151, Mexico; Ministry of Science and Higher Education, Republic of Poland, "International co-financed projects", grant number 5316/H2020/2022/2023/2, Poland; LSC funds from MICIU, DGA and UZ, Spanish Ministry of Science and Innovation PID2022-136297NB-I00/AEI/10.13039/501100011033/FEDER, UE; CERCA program of the Generalitat de Catalunya; Plan de Doctorados Industriales of the Research and Universities Department of the Catalan Government (2022 DI 011); MICIIN; European Union NextGenerationEU(PRTR-C17.I1); generalitad de Catalunya; Spanish Ministry of Innovation and Science under grants MCINN-23-PID2022-139198NB-I00 and PID2021124050NB-C31, Spain; SNF 20FL20-216674, SNF 200021 L-231581 and SNFPCEFP2-203261, Switzerland; the LeverhulmeTrustResearch Fellowship Scheme and the UKRI Future Leaders Fellowship grant number MR/S034102/1, UK. The Hyper-Kamiokande Collaboration would like to thank the T2K Collaboration for providing the models and simulated samples used as a basis in this paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

EMPIAR: a public archive for raw electron microscopy image data

  • Iudin, Andrii
  • Korir, Paul K.
  • Kleywegt, Gerard J.
  • Patwardhan, Ardan
  • Salavert Torres, José|||0000-0001-6309-4401
In discussions at workshops1, 2 and conferences, the cryo-electron microscopy (EM) community has repeatedly expressed the need for public archiving of raw 2D image data to support the validation of 3D structures, methods development and training. We present EMPIAR (http://www.ebi.ac.uk/pdbe/emdb/empiar/), a public archive for raw 2D image data, This work was supported by the UK Medical Research Council with cofunding from the UK Biotechnology and Biological Sciences Research Council (BBSRC; grant MR/L007835 to G.J.K.) and by the BBSRC (grant BB/M018423/1 to J. Swedlow, University of Dundee, Dundee, Scotland). Work on EMDB at PDBe is supported by the Wellcome Trust (grants 088944 and 104948 to G.J.K.), the European Commission Framework 7 Programme (grant 284209 to J. Thornton, EBI, Cambridge, UK), the US National Institutes of Health National Institute of General Medical Sciences (grant R01 GM079429 to W. Chiu, Baylor College of Medicine, Houston, Texas, USA) and EMBL-EBI.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Towards contrast-and pathology-agnostic clinical fetal brain MRI segmentation using SynthSeg

  • Shang, Ziyao
  • Kaandorp, Misha
  • Payette, Kelly
  • Licandro, Roxane
  • Langs, Georg
  • Aviles Verdera, Jordina
  • Hutter, Jana
  • Menze, Bjoern
  • Kasprian, Gregor
  • Cuadra, Meritxell Bach
  • Jakab, Andras
  • Marina
[EN] Magnetic resonance imaging (MRI) has played a crucial role in fetal neurodevelopmental research. Structural annotations of MR images are an important step for quantitative analysis of the developing human brain, with Deep Learning providing an automated alternative for this otherwise tedious manual process. However, segmentation performances of Convolutional Neural Networks often suffer from domain shift, where the network fails when applied to subjects that deviate from the distribution with which it is trained on. In this work, we aim to train networks capable of automatically segmenting fetal brain MRIs with a wide range of domain shifts pertaining to differences in subject physiology and acquisition environments, in particular shape-based differences commonly observed in pathological cases. We introduce a novel data-driven train-time sampling strategy that seeks to fully exploit the diversity of a given training dataset to enhance the domain generalizability of the trained networks. We adapted our sampler, together with other existing data augmentation techniques, to the SynthSeg framework, a generator that utilizes domain randomization to generate diverse training data. We ran thorough experimentations and ablation studies on a wide range of training/testing data to test the validity of the approaches. Our networks achieved notable improvements in the segmentation quality on testing subjects with intense anatomical abnormalities (p < 1e-4), though at the cost of a slighter decrease in performance in cases with fewer abnormalities. Our work also lays the foundation for future works on creating and adapting data-driven sampling strategies for other training pipelines., This project was supported by the Swiss National Science Foundation, grant Nr. IZKSZ3_218590 and 10003124, the Adaptive Brain Circuits in Development and Learning Project, University Research Priority Program of the University of Zurich; by the Vontobel Foundation; by the Anna Muller Grocholski Foundation and the Prof. Max Cloetta Foundation.The dHCP data were provided by the developing Human Connectome Project, KCL-Imperial-Oxford Consortium funded by the European Research Council under the European Union Seventh Framework Programme (FP/20072013)/ERC Grant Agreement no [319456]. We are grateful to the families who generously supported this trial.We acknowledge access to the facilities and expertise of the CIBM Center for Biomedical Imaging, a Swiss research center of excellence founded and supported by CHUV, UNIL, EPFL, UNIGE and HUG. This work is supported by Era-net Neuron MULTIFACT - Swiss National Science Foundation (SNSF) grant 31NE30_203977 and SNSF grants 182602 and 215641.The low field KCL data was possible through funding from the UKRI [MR/T018119/1], DFG [502024488] and ERC [101165242]. NDA study DOI: 10.15154/5tzp-xm67.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Automated and Interpretable Detection of Hippocampal Sclerosis in Temporal Lobe Epilepsy: AID-HS

  • Ripart, Mathilde
  • DeKraker, Jordan
  • Eriksson, Maria H.
  • Piper, Rory J.
  • Gopinath, Siby
  • Parasuram, Harilal
  • Mo, Jiajie
  • Likeman, Marcus
  • Ciobotaru, Georgian
  • Sequeiros-Peggs, Philip
  • Hamandi, Khalid
  • Xie, Hua
  • Cohen, Nathan T.
  • Su, Ting-Yu
  • Rojas-Costa, Gonzalo M.
[EN] Objective: Hippocampal sclerosis (HS), the most common pathology associated with temporal lobe epilepsy (TLE), is not always visible on magnetic resonance imaging (MRI), causing surgical delays and reduced postsurgical seizurefreedom. We developed an open-source software to characterize and localize HS to aid the presurgical evaluation of children and adults with suspected TLE. Methods: We included a multicenter cohort of 365 participants (154 HS; 90 disease controls; 121 healthy controls). HippUnfold was used to extract morphological surface-based features and volumes of the hippocampus from T1-weighted MRI scans. We characterized pathological hippocampi in patients by comparing them to normative growth charts and analyzing within-subject feature asymmetries. Feature asymmetry scores were used to train a logistic regression classifier to detect and lateralize HS. The classifier was validated on an independent multicenter cohort of 275 patients with HS and 161 healthy and disease controls. Results: HS was characterized by decreased volume, thickness, and gyrification alongside increased mean and intrinsic curvature. The classifier detected 90.1% of unilateral HS patients and lateralized lesions in 97.4%. In patients with MRI negative histopathologically-confirmed HS, the classifier detected 79.2% (19/24) and lateralized 91.7% (22/24). The model achieved similar performances on the independent cohort, demonstrating its ability to generalize to new data. Individual patient reports contextualize a patient¿s hippocampal features in relation to normative growth trajectories, visualise feature asymmetries, and report classifier predictions. Interpretation: Automated and Interpretable Detection of Hippocampal Sclerosis (AID-HS) is an open-source pipeline for detecting and lateralizing HS and outputting clinically-relevant reports., M.R. and S.A. are supported by the Rosetrees Trust (A2665) and Epilepsy Research Institute (P2208). K.W. is supported by the Wellcome Trust (301991/Z/23/Z). JD is supported by a Canada Research Chairs program (#950-231964), CIHR Project Grant (366062), and NSERC Discovery Grant (RGPIN-2023-05558). MHE is supported by the Sigrid Jusélius Foundation. S.G. and H.P. are supported by a Seed grant from Amrita Institute of Medical Sciences, Kochi. P.S. and K.H. are supported by Health and Care Research Wales. HX is supported by the Hess Foundation. N.T.C. is supported by an AAN Career Development Award, Hess Foundation. I.W. is supported by NIH R01 NS109439. G.M.R. is supported by FONDECYT grants (#1210195, #1210176, #1220995). A.R. is supported by Ministero dell'Università e della Ricerca PE0000006. A.V. and R.T. are supported by Fundación Iniciativa Para las Neurociencias. H.R.P. is supported by the NIH (R21NS117990). G.P.W. is supported by the Medical Research Council (G0802012, MR/M00841X/1). J.S.D. is supported by the NIHR. A.R.K. is supported by the Natural Sciences and Engineering Research Council of Canada. This work is supported by the NIHR Great Ormond Street Hospital Children's Charity BRC. The views expressed are those of the author(s) and not necessarily those of the NHS, the NIHR or the Department of Health.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Gray matter volumes of the superior temporal gyrus link preterm birth and developmentally disordered eye gazing patterns in toddlers at eighteen months

  • Su, Yanan
  • Li, Guangfei
  • Wang, Shanmei
  • Hao, Dongmei
  • Li, Clara S.
  • Wang, Xiaolin
  • Zhang, Ruolin
  • Yang, Lin
  • Li, Chiang-Shan R.
  • Ye Lin, Yiyao|||0000-0003-2929-181X
[EN] Background: Preterm birth involves structural brain changes and increases the risk of neurodevelopmental disorders, including social cognitive dysfunction as implicated in autism spectrum disorder (ASD). However, it remains unclear whether or how volumetric brain changes may impact the risk of social cognitive dysfunction in toddlers of preterm birth. Methods: We curated data of 569 toddlers approximately 18 months of age, including 76 with preterm (PB) and 493 with term (TB) birth, from the developing Human Connectome Project. We processed the imaging data, collected at birth, and investigated group differences in gray matter volume (GMV) of the brain and eye-tracking data collected at 18 months as well as the interrelationships amongst birth age, GMVs, and eye-tracking markers of ASD. Results: In a covariance analysis with age at scan, total intracranial volume, sex, and number of embryos at gestation as covariates, PB demonstrated higher GMV in bilateral superior temporal gyri (STG). Right STG GMV's were negatively correlated with birth age and positively with the proportion of looking at faces and mouths in PB, but not in TB. Further, path analyses suggested right STG GMV at birth as a marker of preferential face and mouth viewing in PB at 18 months. Conclusions: The findings associate earlier birth age with atypical volumetrics of the right STG and eye gazing patterns in preterm children at 18 months. Longitudinal studies are needed to examine whether these neural and behavioral markers may reflect risks of social cognitive dysfunction in children with neurodevelopmental disorders, including ASD., The current study is supported by National Natural Science Foundation of China (12402350) and National Foreign Experts Program (H20240220). The developing Human Connectome Project was funded by the European Research Council under the European Union Seventh Framework Programme (FP/20072013)/ERC Grant Agreement no. 319456. This work was supported by the NIHR Biomedical Research Centres at Guys and St Thomas NHS Trust and the South London and Maudsley NHS Trust; the ESPRC/Wellcome Centre for Medical Engineering; and the MRC Centre for Neurodevelopmental Disorders. TA was supported by MRC Clinician Scientist Fellowship (MR/P008712/1) and MRC translation support award (MR/V036874/1). JO'M was supported by a Sir Henry Dale Fellowship jointly funded by the Wellcome Trust and the Royal Society (Grant Number 206675/Z/17/Z).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Standardizing Single-Frame Phase Singularity Identification Algorithms and Parameters in Phase Mapping During Human Atrial Fibrillation

  • Li, Xin
  • Almeida, Tiago P.
  • Dastagir, Nawshin
  • Salinet, Joao
  • Chu, Gavin S.
  • Stafford, Peter J.
  • Schlindwein, Fernando S.
  • Ng, G. André
  • Guillem Sánchez, María Salud|||0000-0001-5660-3693
[EN] Purpose Recent investigations failed to reproduce the positive rotor-guided ablation outcomes shown by initial studies for treating persistent atrial fibrillation (persAF). Phase singularity (PS) is an important feature for AF driver detection, but algorithms for automated PS identification differ. We aim to investigate the performance of four different techniques for automated PS detection. Methods 2048-channel virtual electrogram (VEGM) and electrocardiogram signals were collected for 30 s from 10 patients undergoing persAF ablation. QRST-subtraction was performed and VEGMs were processed using sinusoidal wavelet reconstruction. The phase was obtained using Hilbert transform. PSs were detected using four algorithms: (1) 2D image processing based and neighbor-indexing algorithm; (2) 3D neighbor-indexing algorithm; (3) 2D kernel convolutional algorithm estimating topological charge; (4) topological charge estimation on 3D mesh. PS annotations were compared using the structural similarity index (SSIM) and Pearson's correlation coefficient (CORR). Optimized parameters to improve detection accuracy were found for all four algorithms usingF(beta)score and 10-fold cross-validation compared with manual annotation. Local clustering with density-based spatial clustering of applications with noise (DBSCAN) was proposed to improve algorithms 3 and 4. Results The PS density maps created by each algorithm with default parameters were poorly correlated. Phase gradient threshold and search radius (or kernels) were shown to affect PS detections. The processing times for the algorithms were significantly different (p< 0.0001). TheF(beta)scores for algorithms 1, 2, 3, 3 + DBSCAN, 4 and 4 + DBSCAN were 0.547, 0.645, 0.742, 0.828, 0.656, and 0.831. Algorithm 4 + DBSCAN achieved the best classification performance with acceptable processing time (2.0 +/- 0.3 s). Conclusion AF driver identification is dependent on the PS detection algorithms and their parameters, which could explain some of the inconsistencies in rotor-guided ablation outcomes in different studies. For 3D triangulated meshes, algorithm 4 + DBSCAN with optimal parameters was the best solution for real-time, automated PS detection due to accuracy and speed. Similarly, algorithm 3 + DBSCAN with optimal parameters is preferred for uniform 2D meshes. Such algorithms - and parameters - should be preferred in future clinical studies for identifying AF drivers and minimizing methodological heterogeneities. This would facilitate comparisons in rotor-guided ablation outcomes in future works., This work was supported by the NIHR Leicester Biomedical Research Centre, UK. XL received research grants from Medical Research Council UK (MRC DPFS Ref: MR/S037306/1). TA received research grants from the British Heart Foundation (BHF Project Grant No. PG/18/33/33780), BHF Research Accelerator Award funding and Fundacao de Amparo a Pesquisa do Estado de Sao Paulo (FAPESP, Brazil, Grant No. 2017/00319-8). MG research was funded by a research grant from the Instituto de Salud Carlos III (Ministry of Economy and Competitiveness, Spain: PI13-00903). GN received funding from the British Heart Foundation (BHF Programme Grant, RG/17/3/32774).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Anatomical progression of genetic frontotemporal lobar degeneration across the lifespan

  • Planche, Vincent
  • Mansencal, Boris
  • Fonov, Vladimir
  • Tourdias, Thomas
  • Bouzigues, Arabella
  • Russell, Lucy L.
  • Foster, Phoebe H.
  • Ferry-Bolder, Eve
  • van Swieten, John C.
  • Jiskoot, Lize C.
  • Seelaar, Harro
  • Sanchez-Valle, Raquel
  • Laforce, Robert
  • Graff, Caroline
  • Manjón Herrera, José Vicente|||0000-0001-6640-927X
[EN] The recent development of brain charts for the human lifespan offers an ideal modelling framework for pathologies such as genetic frontotemporal lobar degeneration (FTLD) which likely involve both neurodevelopmental and neurodegenerative processes over a lifetime. We have therefore combined this new methodological approach with MRI data from asymptomatic and symptomatic subjects, carrying C9orf72, MAPT or GRN mutations from the Genetic FTD Initiative (GENFI) and the ARTFL-LEFFTDS Longitudinal Frontotemporal Lobar Degeneration (ALLFTD) study.We analysed 37 532 MRIs from control subjects covering the entire lifespan and a total of 1341 MRIs from subjects with a pathogenic FTLD mutation, aged from 18 to 86 years old. We detected the first significant regional brain volume differences on average at 27 years old in C9orf72 and MAPT mutation carriers, and at 42 years old in GRN mutation carriers. The delay between the onset of anatomical changes and the average age of symptom onset (i.e. the presymptomatic phase) was 13 years for MAPT, 17 years for GRN and 34 years for C9orf72 mutation carriers. In terms of effect size, cumulative atrophy over the lifespan was twice as severe in affected brain regions in MAPT than in GRN or C9orf72 mutation carriers. However, the neurodegenerative process was spatially more extensive in C9orf72 (35 brain regions affected out of the 61 tested) compared with GRN or MAPT mutation carriers (25 and 18 regions, respectively). Schematically, the chronological staging of atrophy progression showed an initial involvement of the thalamus in C9orf72 expansion carriers, followed by the fronto-temporo-insular regions, the striatum and the amygdala. In GRN mutation carriers, atrophy began in fronto-insular areas, before progressing toward subcortical structures. In MAPT mutation carriers, atrophy affected the anterior temporal pole with the amygdala and hippocampus, before progressing to fronto-insular regions and the striatum.Our results using brain charts for the human lifespan show that C9orf72 is the most diffuse but also the slowest to emerge among genetic FTLD. MAPT FTLD is more aggressive and focal, while GRN FTLD is also rapidly progressive but with a later onset of the presymptomatic phase. Beyond quantification of the anatomical progression of genetic FTLD over the lifespan, these results may help determine the best timing to model and test disease-modifying strategies in FTLD, and monitor their effect in future clinical trials.; Using brain charts that map structural changes in the brain across the human lifespan, Planche et al. estimate the neurodegenerative trajectories of the three major genetic forms of frontotemporal lobar degeneration. This approach may help determine the optimal timing for testing future disease-modifying therapies., This work benefited from the support of the project HoliBrain of the French National Research Agency (ANR-23-CE45-0020-01) and from the French government in the framework of the University of Bordeaux's France 2030 programme/RRI IMPACT and the PEPR Stratify Aging. This work also benefited from the support of the project PID2020-118608RB-I00 of the Ministerio de Ciencia e Innovacion de Espana. We also thank the PSP-France Foundation. J.B.R. is funded by the Medical Research Council (MC_UU_00030/14; MR/T033371/1) and NIHR Cambridge Biomedical Research Centre (NIHR203312; the views expressed are those of the authors and not necessarily those of the NIHR or the Department of Health and Social Care). The sponsors did not participate in any aspect of the design or performance of the study, including data collection, management, analysis and the interpretation or preparation, review and approval of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A tough act to follow: collagen hydrogel modifications to improve mechanical and growth factor loading capabilities

  • Sarrigiannidis, S.O.
  • Rey, J. M.
  • Dobre, O .
  • González-García, C.
  • Dalby, M.J.
  • Salmerón Sánchez, Manuel
[EN] Collagen hydrogels are among the most well-studied platforms for drug delivery and in situ tissue engineering, thanks to their low cost, low immunogenicity, versatility, biocompatibility, and similarity to the natural extracellular matrix (ECM). Despite collagen being largely responsible for the tensile properties of native connective tissues, collagen hydrogels have relatively low mechanical properties in the absence of covalent cross-linking. This is particularly problematic when attempting to regenerate stiffer and stronger native tissues such as bone. Furthermore, in contrast to hydrogels based on ECM proteins such as fibronectin, collagen hydrogels do not have any growth factor (GF)-specific binding sites and often cannot sequester physiological (small) amounts of the protein. GF binding and in situ presentation are properties that can aid significantly in the tissue regeneration process by dictating cell fate without causing adverse effects such as malignant tumorigenic tissue growth. To alleviate these issues, researchers have developed several strategies to increase the mechanical properties of collagen hydrogels using physical or chemical modifications. This can expand the applicability of collagen hydrogels to tissues subject to a continuous load. GF delivery has also been explored, mathematically and experimentally, through the development of direct loading, chemical cross-linking, electrostatic interaction, and other carrier systems. This comprehensive article explores the ways in which these parameters, mechanical properties and GF delivery, have been optimized in collagen hydrogel systems and examines their in vitro or in vivo biological effect. This article can, therefore, be a useful tool to streamline future studies in the field, by pointing researchers into the appropriate direction according to their collagen hydrogel design requirements., This work was supported by Medical Research Scotland, EPSRC (through a programme grant EP/P001114/1) and a programme of research funded by the Sir Bobby Charlton Foundation. M.S.S. acknowledges support from a grant from the UK Regenerative Medicine Platform 'Acellular/Smart Materials - 3D Architecture' (MR/R015651/1). The graphical abstract was created using BioRender.com.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of Na3WH9 and Na3ReH8 Ternary Hydrides at High Pressures

  • Marqueño, Tomás
  • Osmond, Israel
  • Kuzovnikov, Mikhail A.
  • Shuttleworth, Hannah A.
  • Gregoryanz, Eugene
  • Hermann, Andreas
  • Howie, Ross T.
  • Peña-Álvarez, Miriam
  • Gallego-Parra, Samuel|||0000-0001-6516-4303
[EN] The Na-W-H and Na-Re-H ternary systems were studied in a diamond anvil cell through X-ray diffraction and Raman spectroscopy, supported by density functional theory and molecular dynamics calculations. Na3WH9 can be synthesized above 7.8 GPa and 1400 K, remaining stable between at least 0.1 and 42.1 GPa. The rhenium analogue Na3ReH8 can form at 10.1 GPa upon laser heating, being stable between at least 0.3 and 32.5 GPa. Na3WH9 and Na3ReH8 host [WH9]3- and [ReH8]3- anions, respectively, forming homoleptic 18-electron complexes in both cases. Both ternary hydrides show similar structural types and pressure dependent phase transitions. At the highest pressures they adopt a distorted fcc Heusler structure (Na3WH9-II ' and Na3ReH8-II ') while upon decompression the structure symmetrizes becoming fcc between similar to 6.4 and 10 GPa for Na3WH9-II and at 17 GPa for Na3ReH8-II. On further pressure release, the fcc phases transform into variants of a (quasi-) hexagonal structure at similar to 3 GPa, Na3WH9-I and Na3ReH8-I., The work was supported by the UKRI Future Leaders fellowship Mrc-Mr/T043733/1 and by the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant agreement no. 948895, MetElOne). The authors thank Prof. M. McMahon for allowing us to use the glovebox of his laboratory to load the samples. We acknowledge DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, for the provision of beamline P02.2 at PETRA-III, allocated under proposals I-20220830, I-20221042, I-20221366 and I-20230232. We would like to thank beamline scientists Nico Giordano, Konstantin Glazyrin and Hanns-Peter Lierman for their help during the experiments. The ESRF (Grenoble, France) is acknowledged for providing access to beamline ID15B for the experiment HC-5457. We would like to thank beamline scientists Michael Hanfland, Gaston Garbarino, Mohamed Mezouar and Samuel Gallego-Parra. Computational resources provided by the UK's National Supercomputer Service through the UK Car-Parrinello HEC consortium (EP/X035891/1) and by the UK Materials and Molecular Modelling Hub (EP/P020194) are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Engineered microenvironments for synergistic VEGF - Integrin signalling during vascularization

  • Moulisova, Vladimira
  • González García, Cristina
  • Cantini, Marco
  • Rodrigo Navarro, Aleixandre
  • Weaver, Jessica
  • Costell, Mercedes
  • Dalby, Matthew J.
  • García, Andrés J.
  • Salmerón Sánchez, Manuel
  • Sabater i Serra, Roser|||0000-0002-5550-7066
[EN] We have engineered polymer-based microenvironments that promote vasculogenesis both in vitro and in vivo through synergistic integrin-growth factor receptor signalling. Poly(ethyl acrylate) (PEA) triggers spontaneous organization of fibronectin (FN) into nanonetworks which provide availability of critical binding domains. Importantly, the growth factor binding (FNIII12-14) and integrin binding (FNIII9-10) regions are simultaneously available on FN fibrils assembled on PEA. This material platform promotes synergistic integrin/VEGF signalling which is highly effective for vascularization events in vitro with low concentrations of VEGF. VEGF specifically binds to FN fibrils on PEA compared to control polymers (poly(methyl acrylate), PMA) where FN remains in a globular conformation and integrin/GF binding domains are not simultaneously available. The vasculogenic response of human endothelial cells seeded on these synergistic interfaces (VEGF bound to FN assembled on PEA) was significantly improved compared to soluble administration of VEGF at higher doses. Early onset of VEGF signalling (PLC gamma 1 phosphorylation) and both integrin and VEGF signalling (ERK1/2 phosphorylation) were increased only when VEGF was bound to FN nanonetworks on PEA, while soluble VEGF did not influence early signalling. Experiments with mutant FN molecules with impaired integrin binding site (FN-RGE) confirmed the role of the integrin binding site of FN on the vasculogenic response via combined integrin/VEGF signalling. In vivo experiments using 3D scaffolds coated with FN and VEGF implanted in the murine fat pad demonstrated pro-vascularization signalling by enhanced formation of new tissue inside scaffold pores. PEA-driven organization of FN promotes efficient presentation of VEGF to promote vascularization in regenerative medicine applications., The support from the European Research Council (ERC HealInSynergy, 306990), the UK Medical Research Council (MR/L022710/1) and IOF-Marie Curie fellowship program (Protdel 331655) are acknowledged. RSS and MC acknowledge funding from MINECO-Spain through MAT2015-69315 (including FEDER funds). AJG acknowledges support from the NIH (R01 AR062368 and R01 AR062920).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Galacto-conjugation of Navitoclax as an efficient strategy to increase senolytic specificity and reduce platelet toxicity

  • González-Gualda, Estela
  • Pàez-Rives, Marta
  • Lozano-Torres, Beatriz
  • Macias, David
  • Wilson III, Joseph R.
  • González-López, Cristina
  • Ou, Hui-Ling
  • MIrón-Barroso, Sofía
  • Zhang, Zhenguang
  • Lérida-Viso, Araceli
  • Blandez, Juan F.
  • Rovira, Miguel
  • Fruk, Ljiljana
  • Martins, Carla P.
  • Serrano, Manuel
  • Doherty, Gary J.
  • Muñoz-Espín, Daniel
  • Bernardos Bau, Andrea|||0000-0002-3842-5771
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
[EN] Pharmacologically active compounds with preferential cytotoxic activity for senescent cells, known as senolytics, can ameliorate or even revert pathological manifestations of senescence in numerous preclinical mouse disease models, including cancer models. However, translation of senolytic therapies to human disease is hampered by their suboptimal specificity for senescent cells and important toxicities that narrow their therapeutic windows. We have previously shown that the high levels of senescence-associated lysosomal beta-galactosidase (SA-beta-gal) found within senescent cells can be exploited to specifically release tracers and cytotoxic cargoes from galactose-encapsulated nanoparticles within these cells. Here, we show that galacto-conjugation of the BCL-2 family inhibitor Navitoclax results in a potent senolytic prodrug (Nav-Gal), that can be preferentially activated by SA-beta-gal activity in a wide range of cell types. Nav-Gal selectively induces senescent cell apoptosis and has a higher senolytic index than Navitoclax (through reduced activation in nonsenescent cells). Nav-Gal enhances the cytotoxicity of standard senescence-inducing chemotherapy (cisplatin) in human A549 lung cancer cells. Concomitant treatment with cisplatin and Nav-Gal in vivo results in the eradication of senescent lung cancer cells and significantly reduces tumour growth. Importantly, galacto-conjugation reduces Navitoclax-induced platelet apoptosis in human and murine blood samples treated ex vivo, and thrombocytopenia at therapeutically effective concentrations in murine lung cancer models. Taken together, we provide a potentially versatile strategy for generating effective senolytic prodrugs with reduced toxicities., Royal Society, Grant/Award Number: RG160806; Medical Research Council, Grant/Award Number: MR/R000530/1; Cancer Research UK, Grant/Award Number: C62187/A26989 and C62187/A29760; CRUK Cambridge Centre Early Detection Programme, Grant/Award Number: RG86786
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Functionalization of PLLA with Polymer Brushes to Trigger the Assembly of Fibronectin into Nanonetworks

  • Sprott, Mark Robert
  • Dalby, Matthew J.
  • Salmerón Sánchez, Manuel
  • Cantini, Marco
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Poly-l-lactic acid (PLLA) has been used as a biodegradable polymer for many years; the key characteristics of this polymer make it a versatile and useful resource for regenerative medicine. However, it is not inherently bioactive. Thus, here, a novel process is presented to functionalize PLLA surfaces with poly(ethyl acrylate) (PEA) brushes to provide biological functionality through PEA's ability to induce spontaneous organization of the extracellular matrix component fibronectin (FN) into physiological-like nanofibrils. This process allows control of surface biofunctionality while maintaining PLLA bulk properties (i.e., degradation profile, mechanical strength). The new approach is based on surface-initiated atomic transfer radical polymerization, which achieves a molecularly thin coating of PEA on top of the underlying PLLA. Beside surface characterization via atomic force microscopy, X-ray photoelectron spectroscopy and water contact angle to measure PEA grafting, the biological activity of this surface modification is investigated. PEA brushes trigger FN organization into nanofibrils, which retain their ability to enhance adhesion and differentiation of C2C12 cells. The results demonstrate the potential of this technology to engineer controlled microenvironments to tune cell fate via biologically active surface modification of an otherwise bioinert biodegradable polymer, gaining wide use in tissue engineering applications., The authors acknowledge the EPSRC (EP/P001114/1) and MRC (MR/S005412/1) funding. The authors also acknowledge the EPSRC funding as part of the Doctoral Training Centre EP/F500424/1. This work was also funded by a grant from the UK Regenerative Medicine Platform. X-ray photoelectron spectroscopy was conducted by the National EPSRC XPS Users' Service (NEXUS), Newcastle.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Towards an alternative framework for the evaluation of translational research initiatives

  • MOLAS-GALLART, JORDI|||0000-0002-8320-2681
  • Deste Cukierman, Pablo
  • Ismael Rafols
  • Llopis, O
[EN] The perception that many promising results from basic biomedicine have not systematically contributed to medical treatments and, ultimately, health care improvements, has led to a wide range of publicly funded initiatives aiming at facilitating the 'translation' of scientific discoveries into beneficial applications and practices. Many of these initiatives have been branded as 'Translational Research' (TR), a term widely applied to large research programmes, research activities, and even academic journals. With the popularity of the term, a debate has emerged about the models of research that are to be considered 'translational'. Consequently, the ways in which TR should be analysed and, more specifically, the approaches to the evaluation of TR programmes are also the subject of debate. Given the substantial investments in TR programmes, the definition of TR evaluation strategies and approaches has become an important element of the policy process. In a context of ambiguity about the type of activities to be considered as TR, evaluation approaches and practices can play an important role in determining what actions and outcomes are conceived, in practice, to be relevant and significant, and in doing so, shaping the future nature of TR initiatives. This article discusses the dominant approaches to TR evaluation and proposes an alternative evaluation framework, which would have implications both for TR evaluation processes and for the future shaping of TR programmes., The authors wish to acknowledge the support of the Generalitat Valenciana Prometeo programme, grant number PROMETEO/2012/008, and of the UK Medical Research Council, research grant MR/M00838X/1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dynamics of interaction and internalisation of the antifungal protein PeAfpA into Penicillium digitatum morphotypes

  • Giner-Llorca, Moises
  • Ropero-Pérez, Carolina
  • Garrigues-Cubells, Sandra María
  • Thomson, Darren D.
  • Bignell, Elaine M.
  • Manzanares-Mir, Paloma Mª
  • Marcos-Lopez, Jose Francisco
[EN] Antifungal proteins (AFPs) as the highly active PeAfpA from Penicillium expansum or PdAfpB from Penicillium digitatum exert promising antifungal activity, but their mode of action is not fully understood. We characterised the interaction of PeAfpA against P. digitatum, comparing it to the less active PdAfpB. Despite similar effect on conidia germination, PeAfpA did not induce a burst of reactive oxygen species as PdAfpB. Live-cell fluorescence microscopy revealed complex dynamics of interaction and internalisation of both proteins with distinct P. digitatum morphotypes (quiescent conidia, swollen conidia, germlings and hyphae). Labelled PeAfpA co-localised at the cell wall of quiescent conidia, where its localisation was punctate and not uniformly distributed. This pattern changed during germination to a uniform distribution with increased intensity. Conidia from mutants of genes involved in melanin biosynthesis (pksP/alb1 or arp2) showed an altered distribution of PeAfpA but later mimicked the wild type trend of changes during germination. In swollen conidia and germlings, PeAfpA remained attached to the cell wall. In hyphae, PeAfpA was internalised through the growing hyphal tip after binding to the cell wall, in a non-endocytic but energy-dependent process that caused vacuolisation, which preceded cell death. These results may help the development of biofungicides based on AFPs., This work was supported by grant PID2021-125858OB-I00, and the Severo Ochoa Excellence Program CEX2021-001189-S, funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF, a way of making Europe . M.G.L. and C.R.P. were recipients of predoctoral grants FPU19/02066 and ACIF/2021/364 funded by MCIN/AEI/10.13039/501100011033 and by ESF-Investing in Your future and by Conselleria d'Educacio¿ (Generalitat Valenciana, Comunitat Valenciana, Spain), respectively. M.G.L. international exchange was supported by EST23/00233 grant (funded by MCIN/AEI/10.13039/ 501100011033 and by ESF-Investing in Your future) and SEG10314 EMBO Scientific Exchange Grant. S.G. holds a Juan de la Cierva Incorporacion grant (IJC2020-042749-I) from the Spanish Ministerio de Ciencia e Innovacion, ¿ funded by the European Union, NextGenerationEU PRTR. Work undertaken with EMB and DDT was funded by the Medical Research Council Centre for Medical Mycology at the University of Exeter (MR/N006364/2 and MR/V033417/1), that forms part of the National Institute for Health and Care Research (NIHR) Exeter Biomedical Research Centre (BRC), and the BBSRC project grant BB/ V017004/1 to EMB. We thank Jose Mª Coll (IATA) for his technical help in microscopy and Dr. Amparo Tarrega ¿ (IATA) for her expert advice in the statistical analyses.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

You Talking to Me? Cadherin and Integrin Crosstalk in Biomaterial Design

  • Barcelona-Estaje, Eva
  • Dalby, Matthew J.
  • Cantini, Marco
  • Salmerón Sánchez, Manuel
[EN] While much work has been done in the design of biomaterials to control integrin-mediated adhesion, less emphasis has been put on functionalization of materials with cadherin ligands. Yet, cell-cell contacts in combination with cell-matrix interactions are key in driving embryonic development, collective cell migration, epithelial to mesenchymal transition, and cancer metastatic processes, among others. This review focuses on the incorporation of both cadherin and integrin ligands in biomaterial design, to promote what is called the "adhesive crosstalk." First, the structure and function of cadherins and their role in eliciting mechanotransductive processes, by themselves or in combination with integrin mechanosensing, are introduced. Then, biomaterials that mimic cell-cell interactions, and recent applications to get insights in fundamental biology and tissue engineering, are critically discussed., This work was supported by an EPSRC Programme Grant (No. EP/P001114/1). The authors acknowledge support from a grant from the UK Regenerative Medicine Platform "Acellular/Smart Materials - 3D Architecture" (Grant No. MR/R015651/1) and MRC funding (Grant No. MR/S005412/1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Structural connectivity centrality changes mark the path towards Alzheimer&apos, s disease

  • Peraza, Luis R.
  • Díaz-Parra, Antonio
  • Kennion, Oliver
  • Taylor, John-Paul
  • Kaiser, Marcus
  • Bauer, Roman
  • Moratal, David|||0000-0002-2825-3646
[EN] Introduction: The pathophysiological process of Alzheimer's disease is thought to begin years before clinical decline, with evidence suggesting prion-like spreading processes of neurofibrillary tangles and amyloid plaques. Methods: Using diffusion magnetic resonance imaging data from the Alzheimer's Disease Neuroimaging Initiative database, we first identified relevant features for dementia diagnosis. We then created dynamic models with the Nathan Kline Institute-Rockland Sample database to estimate the earliest detectable stage associated with dementia in the simulated disease progression. Results: A classifier based on centrality measures provides informative predictions. Strength and closeness centralities are the most discriminative features, which are associated with the medial temporal lobe and subcortical regions, together with posterior and occipital brain regions. Our model simulations suggest that changes associated with dementia begin to manifest structurally at early stages. Discussion: Our analyses suggest that diffusion magnetic resonance imaging-based centrality measures can offer a tool for early disease detection before clinical dementia onset., The authors would like to thank Peter N. Taylor and Yujiang Wang for their stimulating feedback and suggestions. Funding: A.D.-P. was supported by grant FPU13/01475 from the Spanish Ministerio de Educacion, Cultura y Deporte (MECD). This work was supported in part by the Spanish Ministerio de Econom&#305;a y Competitividad (MINECO) and FEDER funds under grant BFU2015- 64380-C2-2-R. L.R.P. and J.-P.T. were supported by the NIHR Newcastle Biomedical Research Center awarded to the Newcastle upon Tyne Hospitals NHS Foundation Trust and Newcastle University. M.K. and R.B. were supported by the Engineering and Physical Sciences Research Council of the United Kingdom (EP/K026992/1). R.B. was also supported by (EP/S001433/1) and the Medical Research Council of the United Kingdom (MR/N015037/1). Data collection and sharing for this project was funded by the Alzheimer s Disease Neuroimaging Initiative (ADNI) (National Institutes of Health Grant U01 AG024904) and DOD ADNI (Department of Defense award number W81XWH-12-2- 0012). ADNI is funded by the National Institute on Aging, the National Institute of Biomedical Imaging and Bioengineering, and generous contributions from the following organizations: AbbVie, Alzheimer s Association; Alzheimer s Drug Discovery Foundation; Araclon Biotech; BioClinica, Inc.; Biogen; Bristol-Myers Squibb Company; CereSpir, Inc.; Cogstate; Eisai Inc.; Elan Pharmaceuticals, Inc.; Eli Lilly and Company; EuroImmun; F. Hoffmann-La Roche Ltd and its affiliated company Genentech, Inc.; Fujirebio; GE Healthcare; IXICO Ltd.; Janssen Alzheimer Immunotherapy Research & Development, LLC.; Johnson & Johnson Pharmaceutical Research & Development LLC.; Lumosity; Lundbeck; Merck & Co., Inc.; Meso Scale Diagnostics, LLC.; NeuroRx Research; Neurotrack Technologies; Novartis Pharmaceuticals Corporation; Pfizer Inc.; Piramal Imaging; Servier; Takeda Pharmaceutical Company; and Transition Therapeutics. The Canadian Institutes of Health Research is providing funds to support ADNI clinical sites in Canada. Private sector contributions are facilitated by the Foundation for the National Institutes of Health (www.fnih.org). The grantee organization is the Northern California Institute for Research and Education, and the study is coordinated by the Alzheimer s Therapeutic Research Institute at the University of Southern California. ADNI data are disseminated by the Laboratory for Neuro Imaging at the University of Southern California.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Identification of the presence of ischaemic stroke lesions by means of texture analysis on brain magnetic resonance images

  • Ortiz-Ramón, Rafael
  • Valdés Hernández, Maria del C.
  • González-Castro, Victor
  • Makin, Stephen
  • Armitage, Paul A.
  • Aribisala, Benjamin S.
  • Bastin, Mark E.
  • Deary, Ian J.
  • Wardlaw, Joanna M.
  • Moratal, David|||0000-0002-2825-3646
[EN] Background: The differential quantification of brain atrophy, white matter hyperintensities (WMH) and stroke lesions is important in studies of stroke and dementia. However, the presence of stroke lesions is usually overlooked by automatic neuroimage processing methods and the-state-of-the-art deep learning schemes, which lack sufficient annotated data. We explore the use of radiomics in identifying whether a brain magnetic resonance imaging (MRI) scan belongs to an individual that had a stroke or not. Materials and methods: We used 1800 3D sets of MRI data from three prospective studies: one of stroke mechanisms and two of cognitive ageing, evaluated 114 textural features in WMH, cerebrospinal fluid, deep grey and normal-appearing white matter, and attempted to classify the scans using a random forest and support vector machine classifiers with and without feature selection. We evaluated the discriminatory power of each feature independently in each population and corrected the result against Type 1 errors. We also evaluated the influence of clinical parameters in the classification results. Results: Subtypes of ischaemic strokes (i.e. lacunar vs. cortical) cannot be discerned using radiomics, but the presence of a stroke-type lesion can be ascertained with accuracies ranging from 0.7 < AUC < 0.83. Feature selection, tissue type, stroke subtype and MRI sequence did not seem to determine the classification results. From all clinical variables evaluated, age correlated with the proportion of images classified correctly using either different or the same descriptors (Pearson r = 0.31 and 0.39 respectively, p < 0.001). Conclusions: Texture features in conventionally automatically segmented tissues may help in the identification of the presence of previous stroke lesions on an MRI scan, and should be taken into account in transfer learning strategies of the-state-of-the-art deep learning schemes., This work was funded by the Row Fogo Charitable Trust (MVH, VGC) grant no. BRO-D.FID3668413, and the Wellcome Trust (patient recruitment, scanning, primary study Ref No. 088134/Z/09). The study was conducted independently of the funders who do not hold the data and did not participate in the study design or analyses. The Lothian Birth Cohort 1936 is funded by Age UK (Disconnected Mind grant) and the Medical Research Council (MRC; MR/M01311/1, G1001245, 82800), and the latter supported BSA. IJD was supported by the Centre for Cognitive Ageing and Cognitive Epidemiology, which is funded by the MRC and the Biotechnology and Biological Sciences Research Council (MR/K026992/1). David Moratal acknowledges financial support from the Spanish Ministerio de Economia y Competitividad (MINECO) and FEDER funds under Grant BFU2015-64380-C2-2-R, and from the Conselleria d'Educacio, Investigacio, Cultura i Esport, Generalitat Valenciana (grants AEST/2017/013 and AEST/2018/021). Rafael Ortiz-Ramon was supported by grant ACIF/2015/078 and grant BEFPI/2017/004 from the Conselleria d'Educacio, Investigacio, Cultura i Esport of the Valencian Community (Spain). We thank participants in the studies that provided data for this study, the radiographers and staff at the Brain Research Imaging Centre Edinburgh (http://www.bric.ed.ac.uk/), a SINAPSE (Scottish Imaging Network A Platform for Scientific Excellence, www. sinapse.ac.uk/) collaboration centre. We especially thank the following members of the research teams, who contributed to the recruitment, data collection or image processing in the primary studies, but did not participate in the analysis or writing of this report: Dr. Susana Munoz Maniega, Dr. Natalie Royle, Mrs. Eleni Sakka, Miss. Catherine Murray, Miss Kirsten Shuler.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Biochemical- and Biophysical-Induced Barriergenesis in the Blood¿Brain Barrier: A Review of Barriergenic Factors for Use in In Vitro Models

  • Schofield, Christina L.
  • Rodrigo-Navarro, Aleixandre
  • Dalby, Matthew J.
  • Van Agtmael, Tom
  • Salmerón Sánchez, Manuel
[EN] Central nervous system (CNS) pathologies are a prevalent problem in aging populations, creating a need to understand the underlying events in these diseases and develop efficient CNS-targeting drugs. The importance of the blood-brain barrier (BBB) is evident, acting both as a physical barrier to drug entry into the CNS and potentially as the cause or aggravator of CNS diseases. The development of a biomimetic BBB invitro model is required for the understanding of BBB-related pathologies and in the screening of drugs targeting the CNS. There is currently great interest in understanding the influence of biochemical and biophysical factors, as these have the potential to greatly improve the barrier function of brain microvascular endothelial cells (BMECs). Recent advances in understanding how these may regulate barriergenesis in BMECs help promote the development of improved BBB invitro models and therefore novel interventional therapies for pathologies related to its disruption. Herein, an overview of specific biochemical and biomechanical cues in the formation of the BBB, with a focus on invitro models and how these might recapitulate the BBB function, is provided., The authors acknowledge support via the EPSRC program grant (EP/P001114/1) and funding from MRC (MR/R005567-1), Stroke Association (PPA 2016/02) and Heart Research UK (RG 2664/17/20) to TVA. All the figures were created with BioRender.com. The authors would like to apologize to their colleagues whose work they could not cite due to space constraints.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrocardiographic Imaging for Atrial Fibrillation: A Perspective From Computer Models and Animal Experiments to Clinical Value

  • Salinet, Joao
  • Molero-Alabau, Rubén
  • Schlindwein, Fernando S.
  • Karel, Joël
  • Rodrigo, Miguel
  • Rojo-Álvarez, José Luis
  • Berenfeld, Omer
  • Zenger, Brian
  • Vanheusden, Frederique
  • Siles Paredes, Jimena Gabriela
  • MacLeod, Rob
  • Atienza, Felipe
  • Cluitmans, Matthijs
  • Bonizzi, Pietro
  • Andreu M. Climent|||0000-0002-7260-8811
  • Guillem Sánchez, María Salud|||0000-0001-5660-3693
[EN] Electrocardiographic imaging (ECGI) is a technique to reconstruct non-invasively the electrical activity on the heart surface from body-surface potential recordings and geometric information of the torso and the heart. ECGI has shown scientific and clinical value when used to characterize and treat both atrial and ventricular arrhythmias. Regarding atrial fibrillation (AF), the characterization of the electrical propagation and the underlying substrate favoring AF is inherently more challenging than for ventricular arrhythmias, due to the progressive and heterogeneous nature of the disease and its manifestation, the small volume and wall thickness of the atria, and the relatively large role of microstructural abnormalities in AF. At the same time, ECGI has the advantage over other mapping technologies of allowing a global characterization of atrial electrical activity at every atrial beat and non-invasively. However, since ECGI is time-consuming and costly and the use of electrical mapping to guide AF ablation is still not fully established, the clinical value of ECGI for AF is still under assessment. Nonetheless, AF is known to be the manifestation of a complex interaction between electrical and structural abnormalities and therefore, true electro-anatomical-structural imaging may elucidate important key factors of AF development, progression, and treatment. Therefore, it is paramount to identify which clinical questions could be successfully addressed by ECGI when it comes to AF characterization and treatment, and which questions may be beyond its technical limitations. In this manuscript we review the questions that researchers have tried to address on the use of ECGI for AF characterization and treatment guidance (for example, localization of AF triggers and sustaining mechanisms), and we discuss the technological requirements and validation. We address experimental and clinical results, limitations, and future challenges for fruitful application of ECGI for AF understanding and management. We pay attention to existing techniques and clinical application, to computer models and (animal or human) experiments, to challenges of methodological and clinical validation. The overall objective of the study is to provide a consensus on valuable directions that ECGI research may take to provide future improvements in AF characterization and treatment guidance., JS was supported by Grants #2020/12841-3, #2020/13017-2, and #2018/25606-2, Sao Paulo Research Foundation (FAPESP). FS was supported by research grants from the Medical Research Council UK (MR/S037306/1), and from the British Heart Foundation (BHF Project Grant No. PG/18/33/33780). JR-A was supported by the projects (PID2019-106623RBC41) and meHeart (PID2019-104356RB-C42 and PID2019104356RB-C43) from the Spanish Government. JP was funded by Program of Alliances for Education and Training (Scholarship Brazil-PAEC OEA-GCUB-2017). RM, AC, and MG were supported by the Instituto de Salud Carlos III, and Ministerio de Ciencia, Innovacion y Universidades (supported by the FEDER Fondo Europeo de Desarrollo Regional PI17/01106 and RYC2018-024346B-750), EIT Health (Activity code 19600, EIT Health was supported by the EIT, a body of the European Union), received funding from the European Union's Horizon research and Innovation programme under the Marie Sklodowska-Curie grant agreement no. 860974 and the Generalitat Valenciana Grants (ACIF/2020/265). BZ and RM were supported by the NIH NHLBI Grant No. 1F30HL149327; NIH NIGMS Center for Integrative Biomedical Computing (www.sci.utah.edu/cibc), NIH NIGMS Grants P41GM103545 and R24 GM136986; and the Nora Eccles Treadwell Foundation for Cardiovascular Research. OB was supported in part by research grants from the National Institutes of Health (R01-HL118304 and R21-HL153694), Abbott, Medtronic, and CoreMap. MC was supported by a Veni Grant from the Netherlands Organization for Scientific Research (TTW 16772). FA was supported by the Instituto de Salud Carlos III (PI17/010559 and PI20/01618) and the Consorcio de Investigacion Biomedica en Red de Enfermedades Cardiovasculares (CIBERCV), the Ministerio de Ciencia e Innovacion (cofound by FEDER: Fondo Europeo de Desarrollo Regional), EIT Health (AFFINE 19600, EIT Health was supported by EIT, a body of the European Union).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Role of chemical crosslinking in material-driven assembly offibronectin (nano)networks: 2D surfaces and 3D scaffolds

  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
  • León-Boigues, Laia
  • Sánchez Laosa, Antonio
  • Gómez Estrada, Luis
  • Salmerón Sánchez, Manuel
Poly(ethyl acrylate) (PEA) induces the formation of biomimetic fibronectin (FN) (nano)networks uponsimple adsorption from solutions, a process referred to as material-driven FN fibrillogenesis. The ability ofPEA to organize FN has been demonstrated in 2D and 2.5D environments, but not as yet in 3D scaffolds,which incorporate three-dimensionality and chemical crosslinkers that may influence its fibrillogenicpotential. In this paper we show for the first time that while three-dimensionality does not interferewith PEA-induced FN fibrillogenesis, crosslinking does, and we determined the maximum amount ofcrosslinker that can be added to PEA to maintain FN fibrillogenesis. For this, we synthesised 2D substrateswith different amounts of crosslinker (1 10% of ethylene glycol dimethacrylate) and studied the role ofcrosslinking in FN organization using AFM. The glass transition temperature was seen to increase withcrosslinking density and, accordingly, polymer segmental mobility was reduced. The organization ofFN after adsorption (formation of FN fibrils) and the availability of the FN cell-binding domain werefound to be dependent on crosslinking density. Surface mobility was identified as a key parameter for FNsupramolecular organization. PEA networks with up to 2% crosslinker organize the FN in a similar way tonon-crosslinked PEA. Scaffolds prepared with 2% crosslinker also had FN (nano)networks assembled ontheir walls, showing PEA s ability to induce FN fibrillogenesis in 3D environments as long as the amountsof crosslinker is low enough., M.S.S. acknowledges funding from ERC (HealInSynergy 306990) and the UK MRC (MR/L022710/1). The support from the Ministry of Economy and Competitiveness-Spain (MAT2015-69315-C3-1-R Project) including the FEDER financial support, is gratefully acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. We are also grateful to the Electron Microscopy Service of Universitat Politecnica de Valencia for their valuable help.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Supernova Model Discrimination with Hyper-Kamiokande

  • Abe, K.
  • Adrich, P.
  • Aihara, H.
  • Akutsu, R.
  • Alekseev, I.
  • Ali, A.
  • Ameli, F.
  • Anghel, I.
  • Anthony, L. H. V.
  • Antonova, M.
  • Araya, A.
  • Asaoka, Y.
  • Ashida, Y.
  • Aushev, V.
  • Esteve Bosch, Raul
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] Core-collapse supernovae are among the most magnificent events in the observable universe. They produce many of the chemical elements necessary for life to exist and their remnants-neutron stars and black holes-are interesting astrophysical objects in their own right. However, despite millennia of observations and almost a century of astrophysical study, the explosion mechanism of core-collapse supernovae is not yet well understood. Hyper-Kamiokande is a next-generation neutrino detector that will be able to observe the neutrino flux from the next galactic core-collapse supernova in unprecedented detail. We focus on the first 500 ms of the neutrino burst, corresponding to the accretion phase, and use a newly-developed, high-precision supernova event generator to simulate Hyper-Kamiokande's response to five different supernova models. We show that Hyper-Kamiokande will be able to distinguish between these models with high accuracy for a supernova at a distance of up to 100 kpc. Once the next galactic supernova happens, this ability will be a powerful tool for guiding simulations toward a precise reproduction of the explosion mechanism observed in nature., We thank MacKenzie Warren, Ken'ichiro Nakazato, Tomonori Totani, Adam Burrows, David Vartanyan, and Irene Tamborra for access to the supernova models used in this work and for answering various related questions. This work was supported by MEXT Grant-in-Aid for Scientific Research on Innovative Areas titled "Exploration of Particle Physics and Cosmology with Neutrinos" under grant No. 18H05535, 18H05536, and 18H5537. In addition, participation of individual researchers has been further supported by funds from JSPS, Japan; the European Union's Horizon 2020 Research and Innovation Programme H2020 grant Nos. RISE-GA822070-JENNIFER2 2020 and RISEGA872549-SK2HK; SSTF-BA1402-06, NRF grant Nos. 20090083526, NRF-2015R1A2A1A05001869, NRF-2016R1D1A 1A02936965, NRF-2016R1D1A3B02010606, NRF-2017R1 A2B4012757, and NRF-2018R1A6A1A06024970 funded by the Korean government (MSIP); JSPS-RFBR Grant #20-5250010/20 and the Ministry of Science and Higher Education under contract #075-15-2020-778, Russia; Brazilian Funding agencies, CNPq and CAPES; STFC ST/R00031X/2, ST/T002891/1, ST/V002872/1, Consolidated Grants, UKRI MR/S032843/1 and MR/S034102/1, UK. Software: BONSAI.(Smy 2007), sntools. (Migenda et al. 2021), WCSim, 124. matplotlib.(Hunter 2007), NumPy.(van der Walt et al. 2011), SciPy.(Virtanen et al. 2020)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Midbrain structure volume, estimated myelin and functional connectivity in idiopathic generalised epilepsy

  • McKavanagh, Andrea
  • Ridzuan-Allen, Adam
  • Kreilkamp, Barbara
  • Chen, Yachin
  • Coupé, Pierrick
  • Bracewell, Martyn
  • Das, Kumar
  • Taylor, Peter
  • Keller, Simon
  • Marson, Anthony
  • Manjón Herrera, José Vicente|||0000-0001-6640-927X
[EN] Background: Structural and functional neuroimaging studies often overlook lower basal ganglia struc-tures located in and adjacent to the midbrain due to poor contrast on clinically acquired T1-weighted scans. Here, we acquired T1-weighted, T2-weighted, and resting-state fMRI scans to investigate differ-ences in volume, estimated myelin content and functional connectivity of the substantia nigra (SN), sub -thalamic nuclei (SubTN) and red nuclei (RN) of the midbrain in IGE.Methods: Thirty-three patients with IGE (23 refractory, 10 non-refractory) and 39 age and sex-matched healthy controls underwent MR imaging. Midbrain structures were automatically segmented from T2 -weighted images and structural volumes were calculated. The estimated myelin content for each struc-ture was determined using a T1-weighted/T2-weighted ratio method. Resting-state functional connectiv-ity analysis of midbrain structures (seed-based) was performed using the CONN toolbox.Results: An increased volume of the right RN was found in IGE and structural volumes of the right SubTN differed between patients with non-refractory and refractory IGE. However, no volume findings survived corrections for multiple comparisons. No myelin alterations of midbrain structures were found for any subject groups. We found functional connectivity alterations including significantly decreased connectiv-ity between the left SN and the thalamus and significantly increased connectivity between the right SubTN and the superior frontal gyrus in IGE.Conclusions: We report volumetric and functional connectivity alterations of the midbrain in patients with IGE. We postulate that potential increases in structural volumes are due to increased iron deposition that impacts T2-weighted contrast. These findings are consistent with previous studies demonstrating pathophysiological abnormalities of the lower basal ganglia in animal models of generalised epilepsy.(c) 2023 The Author(s). Published by Elsevier Inc. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/)., This work was supported by a UK Medical Research Council DiMeN DTP studentship awarded to AM. SSK acknowledges support from the UK Medical Research Council (Grant Number MR/S00355X/1) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dynamic Mechanical Control of Alginate-Fibronectin Hydrogels with Dual Crosslinking: Covalent and Ionic

  • Trujillo-Muñoz, Sara
  • Seow, Melanie
  • Lueckgen, Aline
  • Salmerón Sánchez, Manuel
  • Cipitria, Amaia
[EN] Alginate is a polysaccharide used extensively in biomedical applications due to its biocompatibility and suitability for hydrogel fabrication using mild reaction chemistries. Though alginate has commonly been crosslinked using divalent cations, covalent crosslinking chemistries have also been developed. Hydrogels with tuneable mechanical properties are required for many biomedical applications to mimic the stiffness of different tissues. Here, we present a strategy to engineer alginate hydrogels with tuneable mechanical properties by covalent crosslinking of a norbornene-modified alginate using ultraviolet (UV)-initiated thiol-ene chemistry. We also demonstrate that the system can be functionalised with cues such as full-length fibronectin and protease-degradable sequences. Finally, we take advantage of alginate's ability to be crosslinked covalently and ionically to design dual crosslinked constructs enabling dynamic control of mechanical properties, with gels that undergo cycles of stiffening-softening by adding and quenching calcium cations. Overall, we present a versatile hydrogel with tuneable and dynamic mechanical properties, and incorporate cell-interactive features such as cell-mediated protease-induced degradability and full-length proteins, which may find applications in a variety of biomedical contexts., This researchwas funded by Deutsche Forschungsgemeinschaft (DFG) grant CI 203/1-2, DFG Emmy Noether grant (CI 203/2-1) and the Berlin-Brandenburg School for Regenerative Therapies (BSRT) Extension grant. This work was also supported by an EPSRC Program Grant (EP/P001114/1) and from the UK Regenerative Medicine Platform "Acellular/Smart Materials-3D Architecture" (MR/R015651/1). This research was also supported by the Spanish State Research Agency (AEI) through the PID2019-106000RB-C21/AEI/10.13039/501100011033 project (including the FEDER funds). The article processing charge was funded by the Max Planck Society.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High-Pressure Synthesis of Ultra-Incompressible, Hard andSuperconducting Tungsten Nitrides

  • Liang, Akun
  • Osmond, Israel
  • Krach, Georg
  • Shi, Lan-Ting
  • Brüning, Lukas
  • Ranieri, Umbertoluca
  • Spender, James
  • Tasnadi, Ferenc
  • Massani, Bernhard
  • Steven, Callum R.
  • Stewart McWilliams, Ryan
  • Lawrence Bright, Eleanor
  • Giordano, Nico
  • Yin, Yuqing
  • Gallego-Parra, Samuel|||0000-0001-6516-4303
[EN] Transition metal nitrides, particularly those of 5d metals, are known for their outstanding properties, often relevant for industrial applications. Among these metal elements, tungsten is especially attractive given its low cost. In this high-pressure investigation of the W-N system, two novel ultra-incompressible tungsten nitride superconductors, namely W2N3 and W3N5, are successfully synthesized at 35 and 56 GPa, respectively, through a direct reaction between N2 and W in laser-heated diamond anvil cells. Their crystal structure is determined using synchrotron single-crystal X-ray diffraction. While the W2N3 solid's sole constituting nitrogen species are N3- units, W3N5 features both discrete N3- as well as N24- pernitride anions. The bulk modulus of W2N3 and W3N5 is experimentally determined to be 380(3) and 406(7) GPa, and their ultra-incompressible behavior is rationalized by their constituting WN7 polyhedra and their linkages. Importantly, both W2N3 and W3N5 are recoverable to ambient conditions and stable in air. Density functional theory calculations reveal W2N3 and W3N5 to have a Vickers hardness of 30 and 34 GPa, and superconducting transition temperatures at ambient pressure (50 GPa) of 11.6 K (9.8 K) and 9.4 K (7.2 K), respectively. Additionally, transport measurements performed at 50 GPa on W2N3 corroborate with the calculations., The authors acknowledge the European Synchrotron Radiation Facility (ESRF), the Deutsches Elektronen-Synchrotron (DESY), and Advanced Photon Source (APS), Argonne National Laboratory for the provision of beamtime at the ID11, ID15B, P02.2, and 13IDD beamlines, respectively. D.L. thanks the UKRI Future Leaders Fellowship (MR/V025724/1) for financial support. M.B. acknowledges the support of Deutsche Forschungsgemeinschaft (DFG Emmy-Noether project BY112/2-1). G.K. thanks the Friedrich Naumann Foundation for Freedom for a Ph.D. scholarship with Funds from the Federal Ministry of Education and Research (BMBF). B.M. and R.S.M. acknowledge the European Research Council (ERC) under the European Union s Horizon 2020 research and innovation program (Grant Agreement No. 101002868). Portions of this work were performed at GeoSoilEnviroCARS (University of Chicago, Sector 13), GeoSoilEnviroCARS was supported by the National Science Foundation Earth Sciences (EAR-1634415). This research used resources from the Advanced Photon Source, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357. F.T. acknowledge support from the Knut and Alice Wallenberg Foundation (Wallenberg Scholar grant no. KAW-2018.0194). I.O. and M.P.A. thank UKRI Future Leaders fellowship Mrc-Mr/T043733/1 for the financial support. L.-T.S. acknowledges the Guangdong Basic and Applied Basic Research Foundation (Grant No. 2022a1515110404). Computations were enabled by resources provided by the National Academic Infrastructure for Supercomputing in Sweden (NAISS) and the Swedish National Infrastructure for Computing (SNIC) using Dardel at the PDC Center for High-Performance Computing, KTH Royal Institute of Technology and LUMI at the IT Center for Science (CSC), Finland partially funded by the Swedish Research Council through grant agreements no. 2022 06725 and no. 2018 05973. For the purpose of open access, the author had applied a Creative Commons Attribution (CC BY) license to any Author Accepted Manuscript version arising from this submission.
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publication Artículo científico (JournalArticle)

Cross-conjugation increases the conductance of: Meta-connected fluorenones

  • Alanazy A.
  • Leary, Edmund
  • Kobatake T.
  • Sangtarash S.
  • González, Teresa
  • Jiang H.-W.
  • Bollinger G.R.
  • Agraït, Nicolás
  • Sadeghi H.
  • Grace I.
  • Higgins S.J.
  • Anderson H.L.
  • Nichols R.J.
  • Lambert C.J.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bioacoustic fundamental frequency estimation: a cross-species dataset and deep learning baseline

  • Best, Paul
  • Araya-Salas, Marcelo
  • Ekström, Axel G.
  • Freitas, Bárbara
  • Jensen, Frants H.
  • Kershenbaum, Arik
  • Lameira, Adriano R.
  • Lehmann, Kenna D. S.
  • Linhart, Pavel
  • Liu, Robert C.
  • Madhavan, Malavika
  • Markham, Andrew
  • Roch, Marie A.
  • Root-Gutteridge, Holly
  • Šálek, Martin
  • Smith-Vidaurre, Grace
  • Strandburg-Peshkin, Ariana
  • Warren, Megan R.
  • Wijers, Matthew
  • Marxer, Ricard
The fundamental frequency (F0) is a key parameter for characterising structures in vertebrate vocalisations, for instance defining vocal repertoires and their variations at different biological scales (e.g. population dialects, individual signatures). However, the task is too laborious to perform manually, and its automation is complex. Despite significant advancements in the fields of speech and music for automatic F0 estimation, similar progress in bioacoustics has been limited. To address this gap, we compile and publish a benchmark dataset of over 250,000 calls from 14 taxa, each paired with ground truth F0 values. These vocalisations range from infra-sounds to ultra-sounds, from high to low harmonicity, and some include non-linear phenomena. Testing different algorithms on these signals, we demonstrate the potential of neural networks for F0 estimation, even for taxa not seen in training, or when trained without labels. Also, to inform on the applicability of algorithms to analyse signals, we propose spectral measurements of F0 quality which correlate well with performance. While current performance results are not satisfying for all studied taxa, they suggest that deep learning could bring a more generic and reliable bioacoustic F0 tracker, helping the community to analyse vocalisations via their F0 contours., European Commission; Carlsberg Foundation; Max Planck Society; University of Konstanz; American Ornithologists’ Union; Private Donors (Michael and Susan Achey), Peer reviewed
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Notch fracture predictions using the Phase Field method for Ti-6Al-4V produced by Selective Laser Melting after different post-processing conditions

  • Díaz Portugal, Andrés
  • Alegre Calderón, Jesús Manuel
  • Cuesta Segura, Isidoro Iván
  • Martínez Pañeda, Emilio
  • Zhang, Zhiliang
Ti-6Al-4V is a titanium alloy with excellent properties for lightweight applications and its production through Additive Manufacturing processes is attractive for different industrial sectors. In this work, the influence of mechanical properties on the notch fracture resistance of Ti-6Al-4V produced by Selective Laser Melting is numerically investigated. Literature data is used to inform material behaviour. The as-built brittle behaviour is compared to the enhanced ductile response after heat treatment (HT) and hot isostatic pressing (HIP) post-processes. A Phase Field framework is adopted to capture damage nucleation and propagation from two different notch geometries and a discussion on the influence of fracture energy and the characteristic length is carried out. In addition, the influence of oxygen uptake is analysed by reproducing non-inert atmospheres during HT and HIP, showing that oxygen shifts fracture to brittle failures due to the formation of an alpha case layer, especially for the V-notch geometry. Results show that a pure elastic behaviour can be assumed for the as-built SLM condition, whereas elastic-plastic phenomena must be modelled for specimens subjected to heat treatment or hot isostatic pressing. The present brittle Phase Field framework coupled with an elastic-plastic constitutive analysis is demonstrated to be a robust prediction tool for notch fracture after different post-processing routes., Financial support from the Junta of Castile and Leon through grant BU-002-P20, co-financed by FEDER funds. E. Martínez-Pañeda was supported by an UKRI Future Leaders Fellowship (grant MR/V024124/1). A. Díaz wishes to thank the Nanomechanical Lab of NTNU for providing hospitality during his research stay.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Contribución de congreso (ConferenceOutput)

Corrosion of materials from a teaching point of view

  • Peral, Luis Borja
  • Díaz Portugal, Andrés
  • Alegre Calderón, Jesús Manuel
  • Cuesta Segura, Isidoro Iván
Ponencia presentada en: 17th International Technology, Education and Development Conference, Valencia, Spain. 6-8 March, 2023., Corrosion can be defined as the deterioration of metallic components due to electrochemical reactions with the metal and its environment. In the fight against corrosion, research and new technological developments are oriented towards minimizing the effects of this phenomenon in order to delay its 'unavoidable appearance'. Currently, the most common lines of research in this area focus on the knowledge of corrosion mechanisms and material protection systems. At the teaching level, in the Material Science area, theoretical knowledge about corrosion is well-documented but, is it correctly transmitted to the new generations of students taking into account the important economic losses caused by corrosion in the world of industry?. There are several Standards that allow to study the behavior in service of certain materials, such as those applied to carry out corrosion studies by testing in salt spray chamber. This type of test allows to know easily, a material’s tendency towards its oxidation state. However, these type of test requires a relatively high exposure time to the aggressive environment; weeks, even months. In this respect, electrochemical techniques could take an important role since in a ‘few minutes’, material behavior could be determined in a corrosive environment. However, electrochemical corrosion tests, which are complementary to more conventional methodologies, require a much more complex analysis methodology. In this regard, it is important contribute to the training of students, who are interested in the Material Science field, for the right implementation of this type of trials and mainly, for its appropriate analysis and data interpretation. Electrochemistry is an interdisciplinary field in which physical, chemical and mathematical knowledge is essential to accommodate the standardization of certain electrochemical tests that can complement the most conventional corrosion tests. Definitely, at the teaching level, it is important to make students aware of the important problem that corrosion generates at the industrial level, since corrosion damage causes large economic losses, which are equivalent to 3.4% of the global GDP [1]. Are we aware of this problem?. At this point, it is essential to strengthen theoretical knowledge of corrosion through electrochemical laboratory practice, combined with the use of commercial simulation programmes, which can contribute to a better understanding of corrosion damage to try to 'mitigate' its appearance This work presents a new teaching methodology, based on the Finite Elements analysis, in order to understand corrosion problems from university teaching., The authors would like to thank the Spanish Government for the financial support received to perform the research projects PID2021-124768OB-C21 and TED2021-130413B-I00. This work was supported by the Regional Government of Castilla y León (Junta de Castilla y León) and by the Ministry of Science and Innovation MICIN and the European Union NextGenerationEU / PRTR (MR5W.P3 and MR4W.P2). L.B. Peral is grateful for his Margarita Salas Postdoctoral contract (Ref.: MU-21-UP2021-030) funded by the University of Oviedo through the Next Generation European Union.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Hydrogen uptake and diffusion kinetics in a quenched and tempered low carbon steel: experimental and numerical study

  • Peral, Luis Borja
  • Díaz Portugal, Andrés
  • Alegre Calderón, Jesús Manuel
  • Cuesta Segura, Isidoro Iván
To better understand hydrogen uptake kinetics, electrochemical permeation tests have been performed in a quenched and tempered low-alloy steel. Hydrogen uptake and transport has been studied with three different surface roughness, in four different solutions (1 M H2SO4, 1 M H2SO4+As2O3, 0.1 M NaOH and 3.5% NaCl) and two different hydrogen charging current densities (1 and 5 mA/cm2). A strong effect of the charging solution, current density and surface roughness has been demonstrated. In 1 M H2SO4 + As2O3 solution and 5 mA/cm2, hydrogen recombination on the surface of the samples is strongly reduced and interstitial diffusion prevails due to the trap saturation ( ). However, in 1 M H2SO4, 0.1 M NaOH and 3.5% NaCl, hydrogen transport is dominated by trapping and detrapping processes ( ). Permeation transients are numerically reproduced through Finite Element simulations and compared to the experimental results. The relationship between hydrogen diffusion kinetics at the microstructural level and surface effects is clearly established by a mapping strategy obtained from the wide range of experimental results, combined with a numerical approach., The authors would like to thank the Spanish Government for the financial support received to perform the research projects RTI2018-096070-B-C33 and PID2021-124768OB-C21. This work was supported by the Regional Government of Castilla y León (Junta de Castilla y León) and by the Ministry of Science and Innovation MICIN and the European Union Next Generation EU/PRTR (MR4W.P2 and MR5W.P3). L.B. Peral is also grateful for his Margarita Salas Postdoctoral contract (Ref.: MU-21-UP2021-030) funded by the University of Oviedo through the Next Generation European Union.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Influence of hydrogen on the hydraulic fracture behavior of a 42CrMo4 steel welds: Effect of the prior austenite grain size

  • Peral, Luis Borja
  • Díaz Portugal, Andrés
  • Arniella, V.
  • Belzunce, J.
  • Alegre Calderón, Jesús Manuel
  • Cuesta Segura, Isidoro Iván
The influence of hydrogen on the mechanical behavior of a quenched and tempered 42CrMo4 steel has been evaluated by means of high internal pressure fracture tests carried out on hydrogen precharged notched cylindrical specimens. The notched cylindrical specimens were precharged in a 1 M H2SO4 + 0.25 g/l As2O3 solution for 3 h with 1.2 mA/cm2. Hydraulic fracture tests were performed at different loading rates. Hydrogen embrittlement resistance increased with grain size refinement although the fine grained specimen had a higher hydrogen content than the coarse grained one. Fractographic analysis showed hydrogen enhanced decohesion fracture was less pronounced with decreasing grain size. Hydrogen embrittlement susceptibility is discussed in terms of the prior austenite grain size (PAGS) and the operative fracture mechanisms., The authors would like to thank the Spanish Government for the financial support received to perform the research projects TED2021-130413B-I00 and PID2021-124768OB-C21. This work was supported by the Regional Government of Castilla y León (Junta de Castilla y León) and by the Ministry of Science and Innovation MICIN and the European Union Next Generation EU/PRTR (MR5W.P3) and PRTR (MR4W.P2). L.B. Peral is grateful for his Margarita Salas Postdoctoral contract (Ref.: MU-21-UP2021-030) funded by the University of Oviedo through the Next Generation European Union.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Contribución de congreso (ConferenceOutput)

Evaluating hydrogen embrittlement susceptibility of a 2205 DSS

  • Peral, Luis Borja
  • Díaz Portugal, Andrés
  • Rodríguez Aparicio, Rubén
  • Alegre Calderón, Jesús Manuel
  • Cuesta Segura, Isidoro Iván
Ponencia presentada en: 5th International Conference on Structural Integrity (ICSI 2023), 28th August - 1st September, 2023. Funchal, Madeira (Portugal), Hydrogen embrittlement of a 2205 DSS has been evaluated by in-situ tensile tests at high-pressure hydrogen gas. Mechanical tests were conducted in smooth and notched samples, following the ASTM G142 standard. Hydrogen embrittlement susceptibility was studied at 70 and 140 bar. In the smooth samples, the loss of ductility was marked. However, the increase in hydrogen pressure from 70 to 140 bar seems to be practically negligible. On the other hand, in the notched samples, hydrogen damage was especially remarkable at 140 bar. Finally, hydrogen embrittlement susceptibility is also discussed based on the fracture micromechanims., The authors would like to thank the Spanish Government for the financial support received to perform the research projects PID2021-124768OB-C21 and TED2021-130413B-I00–HyDuplex3D. This work was also supported by the Regional Government of Castilla y León (Junta de Castilla y León) and by the Ministry of Science and Innovation MICIN and the European Union Next Generation EU/PRTR (MR4W.P2 and MR5W.P3).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Methodology to predict mechanical properties of PA-12 lattice structures manufactured by powder bed fusion

  • Rodríguez Aparicio, Rubén
  • Alegre Calderón, Jesús Manuel
  • Verbeeten, Wilco M.H.
  • Lorenzo Bañuelos, Miriam
  • Cuesta Segura, Isidoro Iván
Topology optimization for weight reduction of additive manufacturing parts is commonly achieved throughout the creation of lattice structures, typically generated with beams of small size cross-section. In order to carry out accurate simulations of these lattice structures, knowing the mechanical behavior of pillars is required. In this paper, a methodology for determining the mechanical properties of small size pillars printed in PA-12 material, using polymer powder bed fusion (PBF) and in particular the Selective Laser Sintering (SLS) technology, is presented. The effect of defects originated during the manufacturing process on the macroscopic mechanical properties is studied and the mechanisms which influence these properties are analyzed. A methodology for the determination of these properties is proposed, based on a successive correction of the printed nominal diameters according to two approaches; one due to the outer skin of unmelted material and the other due to internal melting defects. Once the material properties are determined, as a function of the cross-section of the lattice pillars, the numerical simulation of lattice-type structures has been carried out and the degree of adjustment of the proposed methodology has been experimentally verified, obtaining good results. This validation provides a reliable method for the simulation of the macroscopic behavior of lattice-type structures with reduced sizes, taking into account the intrinsic defects generated during the printing process., The authors wish to acknowledge the funding received through the Junta de Castilla y León projects BU-002-P20 and INVESTUN/22/BU/0003 co-financed with FEDER funds, and the projects MR5W.P3 (C17. I01. P01. S21) and MR4W.P2 co-financed by JCyL and MICINN and the NextGenerationEU/PRTR funds.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Contribución de congreso (ConferenceOutput)

Hydrogen Embrittlement of AISI 316L steel produced by Selective Laser Melting

  • Peral, Luis Borja
  • Díaz Portugal, Andrés
  • Ebrahimzadeh, P.
  • Fernández-Pariente, I.
  • Alegre Calderón, Jesús Manuel
  • Cuesta Segura, Isidoro Iván
Trabajo presentado en: Third European Conference on the Structural Integrity of Additively Manufactures Materials (ESIAM23), Selective laser melting (SLM) is one of the common methods of additive manufacturing and it can be employed to customize components with complex geometry expected to work in hydrogen atmospheres. However, more studies are still needed to characterize the behavior of printed mechanical components intended to work in contact with hydrogen. In this study, smooth and notched tensile samples were precharged in an acid solution with 8 mA/cm2 for 24h time. Hydrogen damage was more marked in the notched samples, especially at 0.005 mm/min, where fracture micromechanism changed from ductile in the absence of hydrogen to quasi-brittle in the presence of internal hydrogen. The role of the strain-induced martensite is also highlighted., The authors would like to thank the Spanish Government for the financial support received to perform the research projects PID2021-124768OB-C21 and TED2021-130413B-I00. This work was also supported by the Regional Government of Castilla y León (Junta de Castilla y León) and by the Ministry of Science and Innovation MICIN and the European Union Next Generation EU/PRTR (MR4W.P2 and MR5W.P3).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Contribución de congreso (ConferenceOutput)

A Comparison of AI-Enabled Techniques for the Detection of Attacks in IoT Devices

  • Cabeza-Lopez, Eduardo Manuel
  • Ruiz González, Rubén
  • Merino Gómez, Alejandro
  • Curiel Herrera, Leticia Elena
  • Rincón Arango, Jaime Andrés
Comunicación presentada en: 17th International Conference on Computational Intelligence in Security for Information Systems (CISIS 2024) and 15th International Conference on European Transnational Education (ICEUTE 2024), 9-11 October 2024, Salamanca (Spain), The purpose of this research is to enhance the security of Internet of Things devices. The deployment of these gadgets has increased exponentially, nowadays they can be found in every sector from industrial environments to applications in residential homes. This technology is important for enterprises due to the ability to manage different kind of data and control critical operations in an efficiently way. Consequently, these devices have become frequent targets of cyberattacks, highlighting the necessity of robust detection methods. However it is a complicated task to find a uniform security solution due to the variety of devices, with different capabilities and requirements. This study evaluates some artificial intelligence supervised learning algorithms such as XGBoost and Random Forest using the TON_IoT dataset, which are new generations of Internet of Things and Industrial datasets for evaluating the fidelity and the efficiency of different cybersecurity applications based on Artificial Intelligence. The analysis shows both algorithms are effective in detecting cyberattacks, achieving accuracies close to 98%, with a minimal variation in terms of precision and recall. These algorithms outperform the results obtained in previous works with the same dataset, then they can provide an additional security layer, allowing accurate identification of potential attacks. This research shows the importance of artificial intelligence algorithms in cybersecurity and their potential to improve the protection of this kind of devices., This publication is part of the AI4SECIoT project (“Artificial Intelligence for Securing IoT Devices”), funded by the National Cybersecurity Institute (INCIBE) - Spanish Ministry of Economic Affairs and Digital Transformation, and the European Union (NextGenerationEU*/PRTR).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Research data Set de datos (Dataset)

Downsampled NF-ToN-IoT V1 Dataset

  • Martínez Fuentes, Virginia
  • Granados López, Diego
  • Arroyo Puente, Ángel
  • Herrero Cosío, Álvaro
This dataset is a proportionally downsampled version of the NF-ToN-IoT V1 dataset [Sarhan et al., 2021; Sarhan et al., 2023]., This publication is part of the AI4SECIoT project (‘Artificial Intelligence for Securing IoT Devices’), funded by the National Cybersecurity Institute (INCIBE), derived from a collaboration agreement signed between the National Institute of Cybersecurity (INCIBE) and the University of Burgos. This initiative is carried out within the framework of the Recovery, Transformation and Resilience Plan funds, financed by the European Union (Next Generation), the project of the Government of Spain that outlines the roadmap for the modernization of the Spanish economy, the recovery of economic growth and job creation, for solid, inclusive and resilient economic reconstruction after the COVID19 crisis, and to respond to the challenges of the next decade.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Research data Set de datos (Dataset)

Raw Network Traffic Captures for IoT Cyberattack Detection in Fog Computing Environments [Dataset] 

  • Martínez González, Branly Alberto
  • Díez Bermejo, Alejandro
  • Pérez Sevilla, Malena
  • Rincón Arango, Jaime Andrés
  • Urda Muñoz, Daniel
These files consist of raw network packet captures (PCAP format) obtained from controlled laboratory experiments that emulate benign and malicious Internet of Things (IoT) traffic in fog computing environments. The experiments involved resource-constrained edge devices, specifically a Raspberry Pi 4 and a Jetson Nano. Malicious traffic corresponds to Denial-of-Service (DoS) attacks executed from the Jetson Nano against the Raspberry Pi 4 within an isolated local network, while benign traffic reflects typical IoT device behavior, including alert generation, DNS requests, and telemetry or device-management communications (e.g., MQTT updates). All captures were performed under reproducible laboratory conditions and are intended to support research on intrusion detection, IoT network behavior analysis, and the development and training of cybersecurity attack detection models., This work was carried out under the project *AI4SECIoT – Artificial Intelligence for Securing IoT Devices*, funded by the Instituto Nacional de Ciberseguridad (INCIBE) within the framework of the *Plan de Recuperación, Transformación y Resiliencia*, financed by the European Union (Next Generation EU).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Research data Set de datos (Dataset)

Flow-Based IoT Datasets for Cyberattack Detection and Generalization Studies (NFStream and Tranalyzer Tools) [Dataset]  

  • Martínez González, Branly Alberto
  • Díez Bermejo, Alejandro
  • Pérez Sevilla, Malena
  • Rincón Arango, Jaime Andrés
  • Urda Muñoz, Daniel
This repository provides flow-based IoT traffic datasets generated through NFStream and Tranalyzer for cyberattack detection and generalization studies. The datasets originate from two data sources: (1) **UBU-LAB**, representing traffic captured in controlled IoT laboratory conditions, and (2) **ToN-IoT**, a public dataset containing benign and Denial-of-Service (DoS) traffic traces (available at https://research.unsw.edu.au/projects/toniot-datasets). All datasets have been processed and structured to support experiments on flow extraction tool comparison and cross-domain generalization using Multilayer Perceptron (MLP) models. The repository contains: - Raw extracted flows for both NFStream and Tranalyzer, - Balanced datasets used in comparative studies (Paper 2), and - Datasets generated for generalization strategies (Paper 3). The data files are ready to be reused or integrated into new modelling pipelines for IoT network security research., This research was supported by the project *AI4SECIoT – Artificial Intelligence for Securing IoT Devices*, funded by the Instituto Nacional de Ciberseguridad (INCIBE) within the framework of the *Plan de Recuperación, Transformación y Resiliencia*, financed by the European Union (Next Generation EU).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Research data Set de datos (Dataset)

Stochastic Simulation Dataset of IoT Malware Spread Using Individual-Based SIR Models and Topological Overlap Measures

  • Rodríguez García, Rafael
  • Herrero Cosío, Álvaro
This dataset contains simulation data generated from two individual-based stochastic models for malware propagation in an Internet-of-Things (IoT) network: a continuous-time Gillespie SIR model and a discrete-time Monte Carlo SIR model. For each modeling framework, two variants are included: the standard version (Gil / LMC) and the version incorporating the Topological Overlap Measure (TOM) (GilT / LMCTOM). All simulations are executed on a 128-node IoT communication network generated as a power-law cluster graph. Each simulation is stored as an independent CSV file in pivoted format, where rows represent network nodes and columns represent temporal steps produced by the algorithm (event steps in the Gillespie method and iteration steps in the Monte Carlo method). The dataset is suitable for research on malware propagation, stochastic processes on networks, graph-based machine learning models, and cybersecurity analytics., This publication is part of the AI4SECIoT project ("Artificial Intelligence for Securing IoT Devices"), funded by the National Cybersecurity Institute (INCIBE), derived from a collaboration agreement signed between the National Institute of Cybersecurity (INCIBE) and the University of Burgos. This initiative is carried out within the framework of the Recovery, Transformation and Resilience Plan funds, financed by the European Union (Next Generation), the project of the Government of Spain that outlines the roadmap for the modernization of the Spanish economy, the recovery of economic growth and job creation, for solid, inclusive and resilient economic reconstruction after the COVID19 crisis, and to respond to the challenges of the next decade.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Unimodularity and invariant volume forms for Hamiltonian dynamics on coisotropic Poisson homogeneous spaces

  • Gutiérrez Sagredo, Iván
  • Iglesias-Ponte, D.
  • Marrero, J. C.
  • Padrón, E.
In this paper, we introduce a notion of multiplicative unimodularity for a coisotropic Poisson homogeneous space. Then, we discuss the unimodularity and the multiplicative unimodularity for these spaces and the existence of an invariant volume form for explicit Hamiltonian systems on such spaces. Several interesting examples illustrating the theoretical results are also presented., I. Gutierrez-Sagredo has been partially supported by Agencia Estatal de Investigación (Spain) under grant PID2023-148373NB-I 00 funded by MCIN /AEI /10.13039/501100011033/FEDER and by the Q-CAYLE Project funded by the Regional Government of Castilla y León (Junta de Castilla y León). D. Iglesias, J.C. Marrero and E. Padrón acknowledge financial support from the Spanish Ministry of Science and Innovation under grant PID2022-137909NB-C22. All the authors has been partially supported by Agencia Estatal de Investigación (Spain) under grant RED2022-134301-TD. I. Gutierrez-Sagredo thanks Universidad de La Laguna where part of the work has been done for the hospitality and support. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., Open access funding provided by FEDER European Funds and the Junta De Castilla y León under the Research and Innovation Strategy for Smart Specialization (RIS3) of Castilla y León 2021-2027.
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

The Interplay of the Tree and StandLevel Processes Mediate DroughtInduced Forest Dieback: Evidence from Complementary Remote Sensing and Tree-Ring Approaches

  • Moreno Fernández, Daniel|||0000-0002-9597-6609
  • Camarero Martínez, Jesús Julio
  • García Alonso, Mariano|||0000-0001-6260-5791
  • Lines, Emily R.
  • Sánchez Dávila, Jesús
  • Tijerín Triviño, Julián|||0000-0001-9576-4780
  • Valeriano Peñas, Cristina
  • Viana Soto, Alba|||0000-0001-5595-2170
  • Zavala Gironés, Miguel Ángel de|||0000-0003-1456-0132
  • Ruiz Benito, Paloma|||0000-0002-2781-5870
Moreno-Fernández, D., Camarero, J.J., García, M. et al. The Interplay of the Tree and Stand-Level Processes Mediate Drought-Induced Forest Dieback: Evidence from Complementary Remote Sensing and Tree-Ring Approaches. Ecosystems 25, 1738-1753 (2022)., Drought-induced forest dieback can lead to a tipping point in community dominance, but the coupled response at the tree and stand-level response has not been properly addressed. New spatially and temporally integrated monitoring approaches that target different biological organization levels are needed. Here, we compared the temporal responses of dendrochronological and spectral indices from 1984 to 2020 at both tree and stand levels, respectively, of a drought-prone Mediterranean Pinus pinea forest currently suffering strong dieback. We test the influence of climate on temporal patterns of tree radial growth, greenness and wetness spectral indices; and we address the influence of major drought episodes on resilience metrics. Tree-ring data and spectral indices followed different spatio-temporal patterns over the study period (1984?2020). Combined information from tree growth and spectral trajectories suggests that a reduction in tree density during the mid-1990s could have promoted tree growth and reduced dieback risk. Additionally, over the last decade, extreme and recurrent droughts have resulted in crown defoliation greater than 40% in most plots since 2019. We found that tree growth and the greenness spectral index were positively related to annual precipitation, while the wetness index was positively related to mean annual temperature. The response to drought, however, was stronger for tree growth than for spectral indices. Our study demonstrates the value of long-term retrospective multiscale analyses including tree and stand-level scales to disentangle mechanisms triggering and driving forest dieback., Ministerio de Ciencia, Innovacion y Universidades, Universidad de Alcalá, Ministerio de Ciencia e Innovación, Comunidad de Madrid, UK Research and Innovation
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

PlotToSat: a tool for generating time-series signatures from Sentinel-1 and Sentinel-2 at field-based plots for machine learning applications

  • Miltiadou, Milto
  • Grieve, Stuart W.D.
  • Ruiz Benito, Paloma|||0000-0002-2781-5870
  • Astigarraga Urcelay, Julen|||0000-0001-9520-3713
  • Cruz Alonso, Verónica|||0000-0002-0642-036X
  • Tijerín Triviño, Julián|||0000-0001-9576-4780
  • Lines, Emily R.
14 p., PlotToSat offers a practical and time efficient way to the challenge of extracting time-series from multiple Earth Observation (EO) datasets at numerous plots spread across a landscape. This opens up new opportunities to understand and model various ecosystems. Regarding forest ecology, plot networks play a vital role in monitoring and understanding the dynamics of forest ecosystems. These networks often contain thousands of plots arranged systematically to represent an ecosystem. Combining field data collected at plots with EO time-series will allow us to better understand phenology and ecosystem composition, structure and distribution. Linking plot networks with EO data without PlotToSat is time consuming and computational expensive because plots are small and spread out, requiring data from multiple satellite tiles. PlotToSat processed a full year of multi-tile Sentinel-1 and Sentinel-2 data (estimated 18.3TB) at 15,962 plots from the fourth Spanish Forest Inventory in less than 24 h. PlotToSat, implemented using the Python API of Google Earth Engine, offers a new and unique workflow that is innovative due to its efficient, scalable and adaptable implementation. It supports Sentinel-1 and Sentinel-2 data, but its flexible design eases integration of additional EO datasets. New environmental modelling is expected to emerge facilitating EO time-series analyses and investigating interactive effects of environmental drivers., University of Cambridge, Unión Europea, Ministerio de Universidades, Ministerio para la Transición Ecológica y el Reto Demográfico (MITECO)