Skip to main content

DISEÑO Y FABRICACION DE UNA PLATAFORMA BIOMIMETICA TIPO SCAFFOLD/SOPORTE PARA LA REGENERACION DEL CARTILAGO ARTICULAR

BES-2011-046144

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Formación de Recursos Humanos de Investigación
Subprogram subprograma de Formación de Personal Investigador (FPI)
Call Contratos Predoctorales
Call year 2011
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Formación e Incorporación de Investigadores
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Engineering Interpenetrating Polymer Networks of Poly(2-Hydroxyethyl Acrylate) as Ex Vivo Platforms for Articular Cartilage Regeneration

  • Poveda Reyes, Sara
  • Gamboa Martínez, Tatiana Carolina
  • Manzano, Sara
  • Doweidar, Mohamed Hamdy
  • Ochoa Garrido, Ignacio
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
A hydrogel based on interpenetrating polymer networks (IPNs) has been designed to act as a platform in an articular cartilage bioreactor for the ex vivo test of scaffolds, simulating the host tissue. Poly(2-hydroxyethyl acrylate) (PHEA) has been mechanically reinforced by its interpenetration with poly(ethyl acrylate). The resulting IPNs are phase separated systems with a porosity that increases with the amount of PHEA. Compression Young s modulus decreases and permeability increases when increasing the PHEA content in the samples, being the IPN with a 79% of PHEA the best candidate to mimic articular cartilage., The authors gratefully acknowledge the financial support from the Spanish Ministry of Economy and Competitiveness through the MAT2013-46467-C4-1-R and MAT2013-46467-C4-3-R projects (including the FEDER financial support), the FPU AP2010/2557 and the FPI BES-2011-046144 PhD grants, and the CIBER-BBN. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The translation of this paper was funded by the Universitat Politecnica de Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Computational analysis of cartilage implants based on an interpenetrated polymer network for tissue repairing

  • Manzano, Sara
  • Poveda Reyes, Sara
  • Ochoa, Ignacio
  • Doweidar, Mohamed Hamdy
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Interpenetrating polymer networks (IPNs)—two independent polymer networks that interpenetrate in space—are valuable systems for controlling the permeability and mechanical properties of hydrogels for biomedical applications. In particular, poly(ethyl acrylate) (PEA)–poly(2-hydroxyethyl acrylate) (PHEA) IPNs have been explored as hydrogels to mimic articular cartilage. These networks are proposed as scaffold implants in cartilage defects to maintain continuous fluid transport and prevent tissue deterioration. Permeability is a key parameter that governs oxygen and nutrient transport and the removal of cellular waste, and thus strongly influences implant success. While optimization is often pursued via trial-and-error experiments, computational simulation can provide a more exhaustive way to screen cartilage-mimicking biomaterials and avoid costly, time-consuming testing. Accurate and efficient prediction of permeability and of the internal direction and magnitude of fluid flow is highly useful for biomaterial design. Here, we present a 3D computational model based on the Sussman–Bathe hyperelastic material behavior. A fluid–structure analysis is performed with ADINA, modeling these materials as two-phase composites in which a fluid saturates a deformable solid skeleton. The model simulates three non-biodegradable hydrogel compositions with varying PEA/PHEA ratios. Specifically, the study aims to (i) verify the suitability of the Sussman–Bathe material model to reproduce the response of PEA–PHEA biomaterials; (ii) predict fluid flux and the permeability of the proposed IPN hydrogels; and (iii) identify material domains where reduced transport could lead to inadequate flux distributions relative to healthy cartilage. The results show that the model predicts the permeability of PEA–PHEA hydrogels and captures their internal behavior, including the spatial distribution and quantification of fluid flux., The authors gratefully acknowledge the financial support from the Spanish Ministry of Economy and Competitiveness through the MINECO MAT2013-46467-C4-1-R and MAT2013-46467-C4-3-R projects, the FPU AP2010/2557 and the FPI BES-2011-046144 PhD grants and the CIBER-BBN initiative. CIBER-BBN is financed by the Instituto de Salud Carlos III with the assistance from the European Regional Development Fund. The authors would like to thank Mauro Malve, PhD and Theodore Sussman, PhD for their helpful suggestions with ADINA software.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Extracellular matrix inspired gelatin/hyaluronic acid injectable hydrogels

  • Sanmartín-Masiá, Esther
  • Poveda-Reyes, Sara
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Gelatin injectable hydrogels have attracted attention for soft tissues regeneration; however, their poor mechanical properties limit their applications. The authors present a versatile strategy to enhance mechanical properties by mixing gelatin (Gel) with different proportions of hyaluronic acid (HA). The protein-polysaccharide systems are inspired by extracellular matrix and benefit from adhesive properties of RGD sequences in Gel and enhanced hydration and stiffness of HA. The authors were able to raise the Young s modulus from 4kPa to 6kPa and gelation times can be tuned between 4 to 9 min, giving surgeons the option of adapting the material to specific requirements., The authors are grateful for the financial support received from the Spanish Ministry of Economy and Competitiveness through the MAT2013-46467-C4-1-R Project (including Feder funds) and the BES-2011-046144 grant. The CIBER-BBN initiative is funded by the VI National R&D&I Plan 2008-2011, "Iniciativa Ingenio 2010," Consolider Program. CIBER actions are financed by the "Instituto de Salud Carlos III" with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Gelatin-Hyaluronic Acid Hydrogels with Tuned Stiffness to Counterbalance Cellular Forces and Promote Cell Differentiation

  • Poveda Reyes, Sara
  • Moulisova, Vladimira
  • Sanmartín Masiá, Esther del Rosario
  • Quintanilla-Sierra, Luis
  • Salmerón Sánchez, Manuel
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Cells interact mechanically with their environment, exerting mechanical forces that probe the extracellular matrix (ECM). The mechanical properties of the ECM determine cell behavior and control cell differentiation both in 2D and 3D environments. Gelatin (Gel) is a soft hydrogel into which cells can be embedded. This study shows significant 3D Gel shrinking due to the high traction cellular forces exerted by the cells on the matrix, which prevents cell differentiation. To modulate this process, Gel with hyaluronic acid (HA) has been combined in an injectable crosslinked hydrogel with controlled Gel-HA ratio. HA increases matrix stiffness. The addition of small amounts of HA leads to a significant reduction in hydrogel shrinking after cell encapsulation (C2C12 myoblasts). We show that hydrogel stiffness counterbalanced traction forces of cells and this was decisive in promoting cell differentiation and myotube formation of C2C12 encapsulated in the hybrid hydrogels., The authors are grateful for the financial support received from the Spanish Ministry through the MAT2013-46467-C4-1-R project (including the FEDER financial support), the BES-2011-046144, and the EEBB-I-14-08725 grants. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. M.S.S. acknowledges ERC through HealInSynergy 306990.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hybrid Protein-Glycosaminoglycan Hydrogels Promote Chondrogenic Stem Cell Differentiation

  • Moulisova, Vladimira
  • Poveda-Reyes, Sara
  • Sanmartin-Masia, Esther
  • Quintanilla-Sierra, Luis
  • Salmerón Sánchez, Manuel
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Gelatin-hyaluronic acid (Gel-HA) hybrid hydrogels have been proposed as matrices for tissue engineering because of their ability to mimic the architecture of the extracellular matrix. Our aim was to explore whether tyramine conjugates of Gel and HA, producing injectable hydrogels, are able to induce a particular phenotype of encapsulated human mesenchymal stem cells without the need for growth factors. While pure Gel allowed good cell adhesion without remarkable differentiation and pure HA triggered chondrogenic differentiation without cell spreading, the hybrids, especially those rich in HA, promoted chondrogenic differentiation as well as cell proliferation and adhesion. Secretion of chondrogenic markers such as aggrecan, SOX-9, collagen type II, and glycosaminoglycans was observed, whereas osteogenic, myogenic, and adipogenic markers (RUNX2, sarcomeric myosin, and lipoproteinlipase, respectively) were not present after 2 weeks in the growth medium. The most promising matrix for chondrogenesis seems to be a mixture containing 70% HA and 30% Gel as it is the material with the best mechanical properties from all compositions tested here, and at the same time, it provides an environment suitable for balanced cell adhesion and chondrogenic differentiation. Thus, it represents a system that has a high potential to be used as the injectable material for cartilage regeneration therapies., The authors are grateful for the financial support received from the Spanish Ministry through the MAT2016-76039-C4-1-R project (including the FEDER financial support), the BES-2011-046144, and the EEBB-I-14-08725 grants. The CIBER-BBN initiative is funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. M.S.-S. acknowledges the European Research Council (ERC-HealInSynergy 306990) and the UK Engineering and Physical Sciences Research Council (EPSRC-EP/P001114/1)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Injectable composites of loose microfibers and gelatin with improved interfacial interaction for soft tissue engineering

  • POVEDA-REYES, SARA
  • Rodrigo Navarro, Aleixandre
  • Gamboa Martínez, Tatiana Carolina
  • Rodríguez-Cabello, José Carlos
  • Quintanilla-Sierra, Luis
  • Edlund, Ulrica
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Poly(L-lactic acid) (PLLA) microfibers were surface functionalized by graft photopolymerization of 2-hydroxyethyl methacrylate (HEMA) onto the fiber surface. Grafted fibers were easily dispersed in enzymatically gelling tyramine-substituted gelatin, forming a homogeneous dispersion without hindering subsequent gelatin crosslinking. The obtained injectable hydrogels showed improved mechanical properties compared to analogues based on non-modified fibers. The composite with 1% (w/v) of surface modified fibers had a three-fold higher shear storage modulus (535.2 +/- 90 Pa) than pure gelatin (184.9 +/- 32 Pa) while no significant increase was observed in the case of non-grafted fiber composites. Moreover, PHEMA grafting on PLLA fibers did not compromise cell viability and proliferation within the hydrogel. The new injectable hydrogels offer improved potential as substrates for the regeneration of soft tissues., The authors are grateful for the financial support received from the Spanish Ministry through the MAT2013-46467-C4-1-R project (including the FEDER financial support), the BES-2011-046144 and the EEBB-I-13-06179 grants. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reinforcing an Injectable Gelatin Hydrogel with PLLA Microfibers: Two Routes for Short Fiber Production

  • POVEDA-REYES, SARA
  • Mellera-Oglialoro, Leonardo Rubén
  • Martínez-Haya, Rebeca
  • Gamboa Martínez, Tatiana Carolina
  • Ferrer, G.G.
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Short poly-l-lactic acid (PLLA) microfibers have been produced in order to disperse them into the gelatin solution and enable injection in the tissue defect prior to gel formation. Two methods for fabrication of loose fibers with submicrometric dimensions are presented in this paper. One is based on manufacturing electrospun meshes and subsequent milling (PLLA-ES) and the other involves projection of a PLLA solution into a high turbulent non-solvent medium (PLLA-HT). Composites produced with PLLA-ES show a compression Young's modulus from 2.65kPa for the pure gelatin to 6.69kPa for the composite with 1.5% PLLA-ES fibers. The new injectable gelatin-fiber composites are not cytotoxic., The authors are grateful for the financial support received from the Spanish Ministry through the MAT2013-46467-C4-1-R project and the BES-2011-046144 grant. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the "Instituto de Salud Carlos III'' with assistance from the European Regional Development Fund. The authors thank "Servicio de Microscopia Electronica'' of Universitat Politecnica de Valencia for their valuable help. The translation of this paper was funded by the Universitat Politecnica de Valencia, Spain.