Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 29
Encontrada(s) 1 página(s)

Repisalud
Publication Artículo científico (JournalArticle)

Loss of Caveolin-1 and caveolae leads to increased cardiac cell stiffness and functional decline of the adult zebrafish heart.

  • Grivas, Dimitrios
  • González-Rajal, Álvaro
  • Guerrero Rodríguez, Carlos
  • Garcia, Ricardo
  • de la Pompa, Jose Luis
Caveolin-1 is the main structural protein of caveolae, small membrane invaginations involved in signal transduction and mechanoprotection. Here, we generated cav1-KO zebrafish lacking Cav1 and caveolae, and investigated the impact of this loss on adult heart function and response to cryoinjury. We found that cardiac function was impaired in adult cav1-KO fish, which showed a significantly decreased ejection fraction and heart rate. Using atomic force microscopy, we detected an increase in the stiffness of epicardial cells and cells of the cortical zone lacking Cav1/caveolae. This loss of cardiac elasticity might explain the decreased cardiac contraction and function. Surprisingly, cav1-KO mutants were able to regenerate their heart after a cryoinjury but showed a transient decrease in cardiomyocyte proliferation.
Repisalud
Publication Artículo científico (JournalArticle)

MYH10 activation rescues contractile defects in arrhythmogenic cardiomyopathy (ACM).

  • García-Quintáns, Nieves
  • Santiago-Sacristan, Silvia
  • Márquez-López, Cristina
  • Sánchez-Ramos, Cristina
  • Martinez-de-Benito, Fernando
  • Siniscalco, David
  • González-Guerra, Andrés
  • Camafeita, Emilio
  • Roche-Molina, Marta
  • Lytvyn, Mariya
  • Morera, David
  • Guillen, María I
  • Sanguino, María A
  • Sanz-Rosa, David
  • Martin-Perez, Daniel
  • Garcia, Ricardo
  • Bernal, Juan Antonio
The most prevalent genetic form of inherited arrhythmogenic cardiomyopathy (ACM) is caused by mutations in desmosomal plakophilin-2 (PKP2). By studying pathogenic deletion mutations in the desmosomal protein PKP2, here we identify a general mechanism by which PKP2 delocalization restricts actomyosin network organization and cardiac sarcomeric contraction in this untreatable disease. Computational modeling of PKP2 variants reveals that the carboxy-terminal (CT) domain is required for N-terminal domain stabilization, which determines PKP2 cortical localization and function. In mutant PKP2 cells the expression of the interacting protein MYH10 rescues actomyosin disorganization. Conversely, dominant-negative MYH10 mutant expression mimics the pathogenic CT-deletion PKP2 mutant causing actin network abnormalities and right ventricle systolic dysfunction. A chemical activator of non-muscle myosins, 4-hydroxyacetophenone (4-HAP), also restores normal contractility. Our findings demonstrate that activation of MYH10 corrects the deleterious effect of PKP2 mutant over systolic cardiac contraction, with potential implications for ACM therapy.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Standardized nanomechanical atomic force microscopy procedure (SNAP) for measuring soft and biological samples

  • Schillers, Hermann
  • Rianna, Carmela
  • Schape, Jens
  • Luque González, Tomás
  • Doschke, Holger
  • Walte, Mike
  • Uriarte, Juan José
  • Campillo, Noelia
  • Michanetzis, Georgios P. A.
  • Bobrowska, Justyna
  • Dumitru, Andra
  • Herruzo, Elena T.
  • Bovio, Simone
  • Parot, Pierre
  • Galluzzi, Massimiliano
  • Podestà, Alessandro
  • Puricelli, Luca
  • Scheuring, Simon
  • Missirlis, Yannis
  • Garcia, Ricardo
  • Odorico, Michael
  • Teulon, Jean-Marie
  • Lafont, Frank
  • Lekka, Malgorzata
  • Rico Camps, Félix
  • Rigato, Annafrancesca
  • Pellequer, Jean-Luc
  • Oberleithner, Hans
  • Navajas Navarro, Daniel
  • Radmacher, Manfred
We present a procedure that allows a reliable determination of the elastic (Young's) modulus of soft samples, including living cells, by atomic force microscopy (AFM). The standardized nanomechanical AFM procedure (SNAP) ensures the precise adjustment of the AFM optical lever system, a prerequisite for all kinds of force spectroscopy methods, to obtain reliable values independent of the instrument, laboratory and operator. Measurements of soft hydrogel samples with a well-defined elastic modulus using different AFMs revealed that the uncertainties in the determination of the deflection sensitivity and subsequently cantilever's spring constant were the main sources of error. SNAP eliminates those errors by calculating the correct deflection sensitivity based on spring constants determined with a vibrometer. The procedure was validated within a large network of European laboratories by measuring the elastic properties of gels and living cells, showing that its application reduces the variability in elastic moduli of hydrogels down to 1%, and increased the consistency of living cells elasticity measurements by a factor of two. The high reproducibility of elasticity measurements provided by SNAP could improve significantly the applicability of cell mechanics as a quantitative marker to discriminate between cell types and conditions.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

How soft is a single protein?: Stress-strain curve of antibody pentamers with 5 pN and 50 pm resolutions

  • Perrino, Alma P.
  • García García, Ricardo
Understanding the mechanical functionalities of complex biological systems requires the measurement of the mechanical compliance of their smallest components. Here, we develop a force microscopy method to quantify the softness of a single antibody pentamer by measuring the stress–strain curve with force and deformation resolutions, respectively, of 5 pN and 50 pm. The curve shows three distinctive regions. For ultrasmall compressive forces (5–75 pN), the protein's central region shows that the strain and stress are proportional (elastic regime). This region has an average Young's modulus of 2.5 MPa. For forces between 80 and 220 pN, the stress is roughly proportional to the strain with a Young's modulus of 9 MPa. Higher forces lead to irreversible deformations (plastic regime). Full elastic recovery could reach deformations amounting to 40% of the protein height. The existence of two different elastic regions is explained in terms of the structure of the antibody central region. The stress–strain curve explains the capability of the antibody to sustain multiple collisions without any loss of biological functionality., This work was supported by grants from MINECO (Spain), CSD2010-00024 and the European Research Council ERC-AdG-340177 (3DNanoMech), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Subsurface imaging of silicon nanowire circuits and iron oxide nanoparticles with sub-10 nm spatial resolution

  • Perrino, Alma P.
  • Ryu, Y. K.
  • Amo, Carlos A.
  • Morales, María Del Puerto
  • García García, Ricardo
Non-destructive subsurface characterization of nanoscale structures and devices is of significant interest in nanolithography and nanomanufacturing. In those areas, the accurate location of the buried structures and their nanomechanical properties are relevant for optimization of the nanofabrication process and the functionality of the system. Here we demonstrate the capabilities of bimodal and trimodal force microscopy for imaging silicon nanowire devices buried under an ultrathin polymer film. We resolve the morphology and periodicities of silicon nanowire pairs. We report a spatial resolution in the sub-10 nm range for nanostructures buried under a 70 nm thick polymer film. By using numerical simulations we explain the role of the excited modes in the subsurface imaging process. Independent of the bimodal or trimodal atomic force microscopy approach, the fundamental mode is the most suitable for tracking the topography while the higher modes modulate the interaction of the tip with the buried nanostructures and provide subsurface contrast., This work was funded by the European Union FP7/2007-2013 under Grant Agreement No. 318804 (SNM), the Ministerio de Economía y Competitividad (Spain) under grants MAT2013-44858-R, CSD2010-00024 and the European Research Council ERC-AdG-340177 (3DNanoMech)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fundamental High-Speed Limits in Single-Molecule, Single-Cell, and Nanoscale Force Spectroscopies

  • Amo, Carlos A.
  • García García, Ricardo
Force spectroscopy is enhancing our understanding of single-biomolecule, single-cell, and nanoscale mechanics. Force spectroscopy postulates the proportionality between the interaction force and the instantaneous probe deflection. By studying the probe dynamics, we demonstrate that the total force acting on the probe has three different components: the interaction, the hydrodynamic, and the inertial. The amplitudes of those components depend on the ratio between the resonant frequency and the frequency at which the data are measured. A force–distance curve provides a faithful measurement of the interaction force between two molecules when the inertial and hydrodynamic components are negligible. Otherwise, force spectroscopy measurements will underestimate the value of unbinding forces. Neglecting the above force components requires the use of frequency ratios in the 50–500 range. These ratios will limit the use of high-speed methods in force spectroscopy. The theory is supported by numerical simulations., We thank the European Research Council, ERC-AdG-340177 (3DNanoMech), and the Ministerio de Economía y Competitividad (CSD2010-00024) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Atomically resolved three-dimensional structures of electrolyte aqueous solutions near a solid surface

  • Martín-Jiménez, Daniel
  • Chacón, Enrique
  • Tarazona, Pedro
  • García García, Ricardo
Supplementary information: 1. Supplementary Figures 1-7, Supplementary Methods and Supplementary References [pdf file].-- 2. Supplementary Movie 2: 3D AFM image of the mical-KCl aqueous solution (~ 4 M) was obtained by exciting the cantilever at 838 kHz (2nd eigenmode); k= 921 N/m, Q= 24; A0= 0.11 nm. Data points= 1984000 [movie].-- 3. Supplementary Movie 3: 3D AFM image of the mical-NaCl aqueous solution (~ 5 M) was obtained by exciting the cantilever at 159 kHz (1st eigenmode), k= 24 N/m, Q= 7; A0= 0.23 nm. Data points = 2400000 [movie]., Interfacial liquid layers play a central role in a variety of phenomena ranging from friction to molecular recognition. Liquids near a solid surface form an interfacial layer where the molecular structure is different from that of the bulk. Here we report atomic resolution three-dimensional images of electrolyte solutions near a mica surface that demonstrate the existence of three types of interfacial structures. At low concentrations (0.01–1 M), cations are adsorbed onto the mica. The cation layer is topped by a few hydration layers. At higher concentrations, the interfacial layer extends several nanometres into the liquid. It involves the alternation of cation and anion planes. Fluid Density Functional calculations show that water molecules are a critical factor for stabilizing the structure of the interfacial layer. The interfacial layer stabilizes a crystal-like structure compatible with liquid-like ion and solvent mobilities. At saturation, some ions precipitate and small crystals are formed on the mica., This work was funded by the European Research Council ERC-AdG-340177 (3DNanoMech) and Spanish Ministry of Science and Innovation (CSD2010-00024, FIS2013-47350-C5, MDM-2014-0377)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mapping Elastic Properties of Heterogeneous Materials in Liquid with Angstrom-Scale Resolution

  • Amo, Carlos A.
  • Perrino, Alma P.
  • Payam, Amir F.
  • García García, Ricardo
Fast quantitative mapping of mechanical properties with nanoscale spatial resolution represents one of the major goals of force microscopy. This goal becomes more challenging when the characterization needs to be accomplished with subnanometer resolution in a native environment that involves liquid solutions. Here we demonstrate that bimodal atomic force microscopy enables the accurate measurement of the elastic modulus of surfaces in liquid with a spatial resolution of 3 Å. The Young’s modulus can be determined with a relative error below 5% over a 5 orders of magnitude range (1 MPa to 100 GPa). This range includes a large variety of materials from proteins to metal–organic frameworks. Numerical simulations validate the accuracy of the method. About 30 s is needed for a Young’s modulus map with subnanometer spatial resolution., We thank the financial support from the European Research Council ERC-AdG-340177 (3DNanoMech), the Ministerio of Educación, Cultura y Deporte for grant FPU15/04622, and the Ministerio de Economía y Competitividad for grants CSD2010-00024 and MAT2016-76507-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Identification of Single Adsorbed Cations on Mica–Liquid Interfaces by 3D Force Microscopy

  • Martín-Jiménez, Daniel
  • García García, Ricardo
Force microscope provides atomically resolved images of surfaces immersed in a liquid. The presence of different chemical species in the interface (cations, anions, water, neutral atoms) complicates the adscription of the observed features to a given species. We develop a 3D atomic force microscopy method to identify the cations adsorbed on a mica surface from a potassium chloride solution. The method is based on measuring the peak value of the attractive force within the Stern layer. The maximum of the attractive force shows site-specific variations. The positions with the highest attractive force values are associated with the presence of adsorbed potassium ions, while the other positions are associated with a local depletion of the hydration layer. This criterion provides a surface coverage of K cations that is consistent with the one reported by other techniques., This work was funded by the European Research Council ERC-AdG-340177 (3DNanoMech) and the Ministerio de Economía, Industria y Competitividad (MAT2016-76507-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dynamics of breaking intermolecular bonds in high-speed force spectroscopy

  • Uhlig, Manuel R.
  • Amo, Carlos A.
  • García García, Ricardo
Atomic force microscope based single-molecule force spectroscopy provides a description of a variety of intermolecular interactions such as those occurring between receptor molecules and their ligands. Advances in force spectroscopy have enabled performing measurements at high-speeds and sub-microsecond resolutions. We report experiments performed on a biotin–avidin system that reveal that the measured force decreases with the loading rate at high rates. This result is at odds with the established Bell–Evans theory that predicts a monotonic increase of the rupture force with the loading rate. We demonstrate that inertial and hydrodynamic forces generated during the breaking of the bond dominate the measured force at high loading rates. We develop a correction factor to incorporate those effects into the Bell–Evans theory. The correction is necessary to obtain accurate values of the intermolecular forces at high speeds., We thank Peter Hinterdorfer, Daniel J. Muller and Andra C. Dumitru for motivating discussions and revising the Ms Financial support from the European Research Council ERC-AdG-340177 (3DNanoMech) and the Ministerio de Economía y Competitividad for grant MAT2016-76507-R is acknowledged. The fellowship FPU15/04622 from the Ministerio de Educación is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Direct Patterning of p-Type-Doped Few-layer WSe2 Nanoelectronic Devices by Oxidation Scanning Probe Lithography

  • Dago, Arancha I.
  • Ryu, Y. K.
  • Palomares, F. Javier
  • García García, Ricardo
Direct, robust, and high-resolution patterning methods are needed to downscale the lateral size of two-dimensional materials to observe new properties and optimize the overall processing of these materials. In this work, we report a fabrication process where the initial microchannel of a few-layer WSe2 field-effect transistor is treated by oxygen plasma to form a self-limited oxide layer on top of the flake. This thin oxide layer has a double role here. First, it induces the so-called p-doping effect in the device. Second, it enables the fabrication of oxide nanoribbons with controlled width and depth by oxidation scanning probe lithography (o-SPL). After the removal of the oxides by deionized H2O etching, a nanoribbon-based field-effect transistor is produced. Oxidation SPL is a direct writing technique that minimizes the use of resists and lithographic steps. We have applied this process to fabricate a 5 nm thick WSe2 field-effect transistor, where the channel consists in an array of 5 parallel 350 nm half-pitch nanoribbons. The electrical measurements show that the device presents an improved conduction level compared to the starting thin-layer transistor and a positive threshold voltage shift associated to the p-doping treatment. The method enables to pattern devices with sub-50 nm feature sizes. We have patterned an array of 10 oxide nanowires with 36 nm half-pitch by oxidation SPL., We thank the financial support from the European Research Council ERC-AdG-340177 (3DNanoMech) and the Ministerio de Economía y Competitividad (Spain) under the projects MAT2016-76507-R and MAT2016-80394-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Myelinated axons and functional blood vessels populate mechanically compliant rGO foams in chronic cervical hemisected rats

  • Domínguez-Bajo, Ana
  • González-Mayorga, Ankor
  • Guerrero, Carlos R.
  • Palomares, F. Javier
  • García-González, Ricardo
  • López-Dolado, Elisa
  • Serrano, María C.
Neural diseases at the central nervous system including spinal cord injury (SCI) remain therapeutic challenges. Graphene materials are being delineated as alternative tools for neural repair. Herein, the regenerative ability of reduced graphene oxide (rGO) scaffolds to support pivotal features of neural repair at 4 months after SCI is assessed by an interdisciplinary approach. 3D randomly porous foams have been prepared in mechanical compliance with neural cells and tissues (Young's modulus of 1.3 ± 1.0 kPa) as demonstrated by atomic force microscopy techniques applied ex vivo. After implantation, the significant increase in Young's modulus caused by massive cell/protein infiltration does not alter the mechanical performance of the contralateral spinal cord but provides mechanical stability to the lesion. These aerogels appear fully vascularized and populated with neurites, some of them being myelinated excitatory axons. Clinically-inspired magnetic resonance imaging studies demonstrate that the scaffolds significantly reduce perilesional damage with respect to rats without implants and cause no compressive damage in the contralateral hemicord and rostral/caudal regions. The rGO implants do not either alter the rat spontaneous behaviour or induce toxicity in major organs. Finally, preliminary data suggest hints of rGO sheets dissociation and eventual degradation at the injured spinal cord for the first time. In summary, these 3D porous rGO scaffolds are able to induce, without any further biological functionalization, a compilation of positive effects that have been rarely described before, if ever, for any other material implanted in the injured spinal cord to date., This work was supported by the Ministerio de Economía y Competitividad and the Fondo Europeo de Desarrollo Regional (MAT2016-78857-R, MAT2016-76507-R and MAT2016-80394-R, MINECO/FEDER, UE) and the European Research Council ERC-AdG-340177 (3DNanoMech)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Dataset of the publication "Myelinated axons and functional blood vessels populate mechanically compliant rGO foams in chronic cervical hemisected rats"

  • Domínguez-Bajo, Ana
  • González-Mayorga, Ankor
  • Guerrero, Carlos R.
  • Palomares, F. Javier
  • García García, Ricardo
  • López-Dolado, Elisa
  • Serrano, María C.
The copyright of the content of this dataset belongs to the authors of the article indicated above. Permission must be requested to the authors for the reproduction and/or use of any parts of this dataset. Access to this dataset has been made public through the use of the public repository of CSIC (DIGITAL.CSIC). For any further questions, please contact the corresponding author of the article at mc.terradas@csic.es, Spinal cord injury (SCI) remain a therapeutic challenge. In this work, we have explored the regenerative ability of reduced graphene oxide (rGO) scaffolds to support pivotal features of neural repair at 4 months after SCI. 3D randomly porous foams have been prepared in mechanical compliance with neural cells and tissues. After 4 months, these scaffolds are fully vascularized and populated with neurites, some of them identified as myelinated excitatory axons. Magnetic resonance imaging studies demonstrate reduce perilesional damage in the presence of the scaffolds. In summary, these 3D porous rGO scaffolds are able to induce a compilation of positive effects that have been rarely described before, if ever, for any other material implanted in the injured spinal cord. The techniques used in this study include: immunofluorescence, scanning electron microscopy, atomic force microscopy, transmission electron microscopy, confocal laser scanning microscopy, histology, behavioral tests, magnetic resonance imaging, and X-ray photoelectron spectroscopy., This work was supported by the Ministerio de Economía y Competitividad and the Fondo Europeo de Desarrollo Regional (MAT2016-78857-R, MAT2016-76507-R and MAT2016-80394-R, MINECO/FEDER, UE) and the European Research Council ERC-AdG-340177 (3DNanoMech)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fast and high resolution mapping of elastic properties of biomolecules and polymers with bimodal AFM

  • Benaglia, Simone
  • Gisbert, Victor G.
  • Perrino, Alma P.
  • Amo, Carlos A.
  • García García, Ricardo
[EN] Fast, high resolution and wide elastic modulus range mapping of heterogeneous interfaces represents a major goal of atomic force microscopy (AFM). This goal becomes more challenging when the nanomechanical mapping involves biomolecules in their native environment. Over the years, several AFM-based methods have been developed to address that goal. However, none of those methods combine sub-nanometer spatial resolution, quantitative accuracy, fast data acquisition speed, wide elastic modulus range and operation in physiological solutions. Here we present detailed protocols to generate high resolution maps of the elastic properties of biomolecules and polymers by using bimodal AFM. The method is fast because the elastic modulus, deformation and topography images are obtained simultaneously. The method is efficient because just a single data point per pixel is needed to generate the above images. In addition, by knowing the deformation, bimodal AFM enables to reconstruct the true topography of the surface., European Research Council (ERC–AdG–340177; 3DNanoMech) and grants CSD201000024 and MAT2016-76507-R from the Ministerio de Economía y Competitividad. This work received funding from the European Union’s Horizon 2020 Research and Innovation Programme under Marie Sklodowska-Curie grant agreement 721874 (SPM2.0). We also acknowledge fellowships FPU15/04622 (C.A.A.) and BES-2017-081907 (V.G.G.) from the Ministerio de Educación., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Atomic and Molecular Resolution Mapping of Solid-Liquid Interfaces by 3D Atomic Force Microscopy

  • Fukuma, Takeshi
  • García García, Ricardo
[EN] Hydration layers are ubiquitous in life and technology. Hence, interfacial aqueous layers have a central role in a wide range of phenomena from materials science to molecular and cell biology. A complete understanding of those processes requires, among other things, the development of very-sensitive and high-resolution instruments. Three-dimensional atomic force microscopy (3D-AFM) represents the latest and most successful attempt to generate atomically resolved three-dimensional images of solid−liquid interfaces. This review provides an overview of the 3D-AFM operating principles and its underlying physics. We illustrate and explain the capability of the instrument to resolve atomic defects on crystalline surfaces immersed in liquid. We also illustrate some of its applications to imaging the hydration structures on DNA or proteins. In the last section, we discuss some perspectives on emerging applications in materials science and molecular biology., World Premier International Research Center Initiative (WPI), MEXT, Japan and JSPS KAKENHI Grant Number JP16H02111. RG acknowledges financial support from the European Research Council ERC–AdG–340177 (3DNanoMech) and the Ministerio de Economia y Competitividad MAT2016-76507-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Advanced scanning probe lithography

  • García García, Ricardo
  • Knoll, Armin W.
  • Riedo, Elisa
The nanoscale control afforded by scanning probe microscopes has prompted the development of a wide variety of scanning-probe-based patterning methods. Some of these methods have demonstrated a high degree of robustness and patterning capabilities that are unmatched by other lithographic techniques. However, the limited throughput of scanning probe lithography has prevented its exploitation in technological applications. Here, we review the fundamentals of scanning probe lithography and its use in materials science and nanotechnology. We focus on robust methods, such as those based on thermal effects, chemical reactions and voltage-induced processes, that demonstrate a potential for applications., Financial support from the European Research Council AdG no. 340177 (R.G.) and StG no. 307079 (A.W.K.), the European Commission FP7-ICT-2011 no. 318804 (R.G. and A.W.K.), the Swiss National Science Foundation SNSF no. 200020-144464 (A.W.K.), the Ministerio de Economía y Competitividad MAT2013-44858-R (R.G.), the National Science Foundation CMMI-1100290 (E.R.), the MRSEC program DMR-0820382 (E.R.) and the Office of Basic Energy Sciences of the Department of Energy DE-SC0002245 (E.R.) are acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dynamic force microscopy simulator (dForce): A tool for planning and understanding tapping and bimodal AFM experiments

  • Vargas Guzmán, Horacio Andrés
  • García, Pablo D.
  • García García, Ricardo
We present a simulation environment, dForce, which can be used for a better understanding of dynamic force microscopy experiments. The simulator presents the cantilever-tip dynamics for two dynamic AFM methods, tapping mode AFM and bimodal AFM. It can be applied for a wide variety of experimental situations in air or liquid. The code provides all the variables and parameters relevant in those modes, for example, the instantaneous deflection and tip-surface force, velocity, virial, dissipated energy, sample deformation and peak force as a function of time or distance. The simulator includes a variety of interactions and contact mechanics models to describe AFM experiments including: van der Waals, Hertz, DMT, JKR, bottom effect cone correction, linear viscoelastic forces or the standard linear solid viscoelastic model. We have compared two numerical integration methods to select the one that offers optimal accuracy and speed. The graphical user interface has been designed to facilitate the navigation of nonexperts in simulations. Finally, the accuracy of dForce has been tested against numerical simulations performed during the last 18 years., This work was funded by the European Research Council ERC-AdG-340177 (3DNanoMech) and the Spanish Ministry of Economy (MINECO) through grant CSD2010-00024., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Force reconstruction from tapping mode force microscopy experiments

  • Payam, Amir F.
  • Martín-Jiménez, Daniel
  • García García, Ricardo
Fast, accurate, and robust nanomechanical measurements are intensely studied in materials science, applied physics, and molecular biology. Amplitude modulation force microscopy (tapping mode) is the most established nanoscale characterization technique of surfaces for air and liquid environments. However, its quantitative capabilities lag behind its high spatial resolution and robustness. We develop a general method to transform the observables into quantitative force measurements. The force reconstruction algorithm has been deduced on the assumption that the observables (amplitude and phase shift) are slowly varying functions of the tip–surface separation. The accuracy and applicability of the method is validated by numerical simulations and experiments. The method is valid for liquid and air environments, small and large free amplitudes, compliant and rigid materials, and conservative and non-conservative forces., This work was funded by the Spanish Ministry of Economy (MINECO) through grant CSD2010–00024 and the European Research Council ERC-AdG-340177 (3DNanoMech).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Atomic-scale mapping of hydrophobic layers on graphene and few-layer MoS2 and WSe2 in water

  • Uhlig, Manuel R.
  • Martín-Jiménez, Daniel
  • García García, Ricardo
Journal peer review information: Nature Communications thanks Mingdong Dong and other anonymous reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available., [EN] The structure and the role of the interfacial water in mediating the interactions of extended hydrophobic surfaces are not well understood. Two-dimensional materials provide a variety of large and atomically flat hydrophobic surfaces to facilitate our understanding of hydrophobic interactions. The angstrom resolution capabilities of three-dimensional AFM are exploited to image the interfacial water organization on graphene, few-layer MoS2 and few-layer WSe2. Those interfaces are characterized by the existence of a 2 nm thick region above the solid surface where the liquid density oscillates. The distances between adjacent layers for graphene, few-layer MoS2 and WSe2 are ~0.50 nm. This value is larger than the one predicted and measured for water density oscillations (~0.30 nm). The experiments indicate that on extended hydrophobic surfaces water molecules are expelled from the vicinity of the surface and replaced by several molecular-size hydrophobic layers., This work was funded by the European Research Council ERC-AdG-340177 (3DNanoMech) and the Ministerio de Economía, Industria y Competitividad (MAT2016-76507-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dependence of the volume of an antibody on the force applied in a force microscopy experiment in liquid

  • Rodriguez-Ramos, Jorge
  • Perrino, Alma P.
  • García García, Ricardo
The volume of a protein can be estimated from its molecular weight. This approach has also been applied in force microscopy experiments. Two factors contribute to the determination of the volume from a force microscope image, the applied force and the tip radius. Those factors act in opposite directions. Here, we demonstrate that in the optimum conditions to image a protein, the apparent volume deduced from an AFM image overestimates the real protein volume. The lateral broadening due to the tip finite size, makes the simulated volume to exceed the real protein volume value, while the force applied by the tip tends to decrease the measured volume. The measured volume could coincide with the real volume for either a point-size tip at zero force or when the compression exerted by the tip compensates its dilation effects. The interplay between the above factors make unsuitable to apply the molecular weight method to determine the volume of a protein from AFM data., This work was partially funded by grants from MINECO (Spain), CSD2010-00024, from the Spanish National Research Council, the Program iCOOPB2013 (COOPB20023) and the European Research Council ERC-AdG-340177 (3DNanoMech).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Imaging modes of atomic force microscopy for application in molecular and cell biology

  • Dufrêne, Yves F.
  • Ando, Toshio
  • García García, Ricardo
  • Alsteens, David
  • Martínez-Martín, David
  • Engel, Andreas
  • Gerber, Christoph
  • Müller, Daniel J.
Atomic force microscopy (AFM) is a powerful, multifunctional imaging platform that allows biological samples, from single molecules to living cells, to be visualized and manipulated. Soon after the instrument was invented, it was recognized that in order to maximize the opportunities of AFM imaging in biology, various technological developments would be required to address certain limitations of the method. This has led to the creation of a range of new imaging modes, which continue to push the capabilities of the technique today. Here, we review the basic principles, advantages and limitations of the most common AFM bioimaging modes, including the popular contact and dynamic modes, as well as recently developed modes such as multiparametric, molecular recognition, multifrequency and high-speed imaging. For each of these modes, we discuss recent experiments that highlight their unique capabilities., Y.F.D. was supported by the Université catholique de Louvain, the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement no. 693630), the WELBIO (grant no. WELBIO-CR-2015A-05), the National Fund for Scientific Research (FNRS), the Federal Office for Scientific, Technical and Cultural Affairs (Interuniversity Poles of Attraction Programme) and the Research Department of the Communauté française de Belgique (Concerted Research Action). D.A. and D.M.M. were supported by the European Molecular Biology Organization (EMBO; ALTF 265-2013 and ALTF 506-2012). D.J.M. was supported by the Swiss National Science Foundation (SNF; grants 205320_160199 and 310030B_160225), the NCCR Molecular Systems Engineering and the Swiss Commission for Technology and Innovation (CTI; grant 17970.1). C.G. was supported by the Swiss Nano Institute (SNI) of the University of Basel. R.G. acknowledges financial support from the European Research Council AdG no. 340177 and the Ministerio de Economia y Competitividad MAT2016-76507-R. T.A. was supported by the Japan Society for the Promotion of Science (JSPS; grants 24227005 and 26119003) and by the Japan Science and Technology Agency (JST; CREST program on Structural Life Science and Advanced Core Technology for Innovative Life Science Research).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Angstrom-resolved metal-organic framework-liquid interfaces

  • Chiodini, Stefano
  • Reinares-Fisac, Daniel
  • Espinosa, Francisco M.
  • Gutiérrez-Puebla, Enrique
  • Monge, M. Ángeles
  • Gándara Barragán, Felipe
  • García García, Ricardo
Metal-organic frameworks (MOFs) are a class of crystalline materials with a variety of applications in gas storage, catalysis, drug delivery or light harvesting. The optimization of those applications requires the characterization of MOF structure in the relevant environment. Dynamic force microscopy has been applied to follow dynamic processes of metal-organic-framework material. We provide images with spatial and time resolutions, respectively, of angstrom and seconds that show that Ce-RPF-8 surfaces immersed in water and glycerol experience a surface reconstruction process that is characterized by the diffusion of the molecular species along the step edges of the open terraces. The rate of the surface reconstruction process depends on the liquid. In water it happens spontaneously while in glycerol is triggered by applying an external force., We thank the financial support from the European Research Council ERC – AdG – 340177 (3DNanoMech) and the Ministerio de Economía y Competitividad (MINECO) (MAT2016-76507-R, MAT2013-44858-R, MAT2016-78465-R, and CTQ2014-61748-EXP). F.G. acknowledges financial support by MINECO (Programa Ramón y Cajal).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fast, quantitative and high resolution mapping of viscoelastic properties with bimodal AFM

  • Benaglia, Simone
  • Amo, Carlos A.
  • García García, Ricardo
Electronic supplementary information (ESI) available. See DOI: 10.1039/c9nr04396a, Quantitative mapping of viscoelastic properties of soft matter with a nanoscale spatial resolution is an active and relevant research topic in atomic force microscopy (AFM) and nanoscale science characterization. The AFM has demonstrated its accuracy to measure the energy dissipated on a sample surface with an atomic-scale resolution. However, the transformation of energy dissipation values associated with viscoelastic interactions to a material property remains very challenging. A key issue is to establish the relationship between the AFM observables and some material properties such as viscosity coefficient or relaxation time. Another relevant issue is to determine the accuracy of the measurements. We demonstrate that bimodal atomic force microscopy enables the accurate measurement of several viscoelastic parameters such as the Young's modulus, viscosity coefficient, retardation time or loss tangent. The parameters mentioned above are measured at the same time that the true topography. We demonstrate that the loss tangent is proportional to the viscosity coefficient. We show that the mapping of viscoelastic properties neither degrades the spatial resolution nor the imaging speed of AFM. The results are presented for homogeneous polymer and block co-polymer samples with Young's modulus, viscosity and retardation times ranging from 100 MPa to 3 GPa, 10 to 400 Pa s and 50 to 400 ns, respectively. Numerical simulations validate the accuracy of bimodal AFM to determine the viscoelastic parameters., European Research Council ERC–AdG–340177 (3DNanoMech) and the Ministerio de Economía y Competitividad for grants CSD2010-00024 and MAT2016-76507-R. This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 721874 (SPM2.0). The fellowship FPU15/04622 from the Ministerio de Educación., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Standardized nanomechanical atomic force microscopy procedure (SNAP) for measuring soft and biological samples

  • Schillers, Hermann
  • Rianna, Carmela
  • Schäpe, Jens
  • Luque, Tomás
  • Doschke, Holger
  • Wälte, Mike
  • Uriarte, Juan José
  • Campillo, Noelia
  • Michanetzis, Georgios P. A.
  • Bobrowska, Justyna
  • Dumitru, Andra C.
  • Herruzo, Elena T.
  • Bovio, Simone
  • Parot, Pierre
  • Galluzzi, Massimiliano
  • Podestà, Alessandro
  • Puricelli, Luca
  • Scheuring, Simon
  • Missirlis, Yannis
  • García García, Ricardo
  • Odorico, Michael
  • Teulon, Jean-Marie
  • Lafont, Frank
  • Lekka, Malgorzata
  • Rico, Felix
  • Rigato, Annafrancesca
  • Pellequer, Jean-Luc
  • Oberleithner, Hans
  • Navajas, Daniel
  • Radmacher, Manfred
We present a procedure that allows a reliable determination of the elastic (Young's) modulus of soft samples, including living cells, by atomic force microscopy (AFM). The standardized nanomechanical AFM procedure (SNAP) ensures the precise adjustment of the AFM optical lever system, a prerequisite for all kinds of force spectroscopy methods, to obtain reliable values independent of the instrument, laboratory and operator. Measurements of soft hydrogel samples with a well-defined elastic modulus using different AFMs revealed that the uncertainties in the determination of the deflection sensitivity and subsequently cantilever's spring constant were the main sources of error. SNAP eliminates those errors by calculating the correct deflection sensitivity based on spring constants determined with a vibrometer. The procedure was validated within a large network of European laboratories by measuring the elastic properties of gels and living cells, showing that its application reduces the variability in elastic moduli of hydrogels down to 1%, and increased the consistency of living cells elasticity measurements by a factor of two. The high reproducibility of elasticity measurements provided by SNAP could improve significantly the applicability of cell mechanics as a quantitative marker to discriminate between cell types and conditions., This work was supported by grants to D.N., T.L., N.C., and J.J.U. (Spanish Ministry of Economy and Competitiveness FIS-PI14/00280), M.L. and J.B. (National Science Center NCN DEC-2011/01/M/ST3/00711), H.O. (Deutsche Forschungsgemeinschaft, Koselleck 68/1 and Centre of Excellence, Cells in Motion (CIM), University of Münster, Germany), S.B. and F.L. (ANR-10-EQPX-04-01) and A.D., E.T.H., R.G. (CSD2010-00024, ERC-AdG-340177). A.P. thanks the Dept. of Physics of the University of Milano for financial support under the project “Piano di Sviluppo dell’Ateneo per la Ricerca 2014”, actions: “A. Upgrade of instrumentation”, and “B. Support to young researchers”. We acknowledge the support of the International AFMBioMed Conference Association.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Combined magnetoliposome formation and drug loading in one step for efficient AC-magnetic Field Remote Controlled Drug Release

  • Fortes Brollo, María Eugenia
  • Domínguez-Bajo, Ana
  • Tabero, Andrea
  • Domínguez-Arca, Vicente
  • García-Gisbert, Víctor
  • Prieto, Gerardo
  • Johansson, Christer
  • García García, Ricardo
  • Villanueva, Angeles
  • Serrano, María C.
  • Morales, María Del Puerto
[EN] We have developed a reproducible and facile one step strategy for the synthesis of doxorubicin loaded magnetoliposomes by using a thin-layer evaporation method. Liposomes of around 200 nm were made of 1,2-Dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and iron oxide nanoparticles (NP) with negative, positive and hydrophobic surfaces that were incorporated outside, inside or between the lipid bilayers, respectively. To characterize how NP are incorporated in liposomes, advanced cryoTEM and atomic force microscope (AFM) techniques have been used. It was observed that only when the NP are attached outside the liposomes, the membrane integrity is preserved (lipid melt transition shifts to 38.7 ºC with high enthalpy 34.8 J/g) avoiding the leakage of encapsulated drug while having good colloidal properties and the best heating efficiency under an alternating magnetic field (AMF). These magnetoliposomes were tested with two cancer cell lines, MDA-MB-231 and HeLa cells. First, 100 % of cellular uptake was achieved with a high cell survival (above 80 %), which is preserved for doxorubicin loaded magnetoliposomes (83 %). Then, we demonstrate that doxorubicin release can be triggered by remote control using a non-invasive external AMF for 1 hour, leading to a cell survival reduction of 20 %. Magnetic field conditions of 202 kHz and 30 mT seem to be enough to produce an effective heating avoiding drug degradation. In conclusion, these drug loaded magnetoliposomes prepared in one step could be used for an efficient drug release on demand at a specific time and place using an external AMF and reducing or even eliminating side effects., M. E. F. Brollo acknowledges the Brazilian agency CNPq for the grant [232947/2014-7] within the Science without Borders program and the COST action program for the grant [TD1402 – 38989]. The work was supported by the Spanish Government under projects MAT2017-88148-R (AEI/FEDER, UE), MAT2016-76507-R, CTQ2016-78454-C2-2-R, by the Comunidad de Madrid (S2018/NMT-4321 NANOMAGCOST-CM), the European Research Council through ERC-AG grant 340177. IMDEA Nanociencia acknowledges support from the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (MINECO, Grant SEV-2016-0686). The characterization was performed using the ICMM/CSIC general services (X-ray, ICP). ACS analyses were performed at RISE Acreo in Gothenburg, Sweden and cryo-TEM images were taken by Dr. Francisco Javier Chichón at the Cryo-EM facility (CiB-CNB-CSIC) placed on the National Center for Biotechnology in Madrid, Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanorheology of living cells measured by AFM-based force-distance curves

  • García, Pablo D.
  • Guerrero, Carlos R.
  • García García, Ricardo
[EN] Mechanobiology aims to establish functional relationships between the mechanical state of a living a cell and its physiology. The acquisition of force-distance curves with an AFM is by far the dominant method to characterize the nanomechanical properties of living cells. However, theoretical simulations have shown that the contact mechanics models used to determine the Young's modulus from a force-distance curve could be off by a factor 5 from its expected value. The semi-quantitative character arises from the lack of a theory that integrates the AFM data, a realistic viscoelastic model of a cell and its finite-thickness. Here, we develop a method to determine the mechanical response of a cell from a force-distance curve. The method incorporates bottom-effect corrections, a power-law rheology model and the deformation history of the cell. It transforms the experimental data into viscoelastic parameters of the cell as a function of the indentation frequency. The quantitative agreement obtained between the experiments performed on living fibroblast cells and the analytical theory supports the use of force-distance curves to measure the nanorheological properties of cells., Fruitful discussions with J. Garcia-Sanchez and F. M. Espinosa are acknowledged. We thank the financial support from the European Research Council ERC–AdG–340177 (3DNanoMech), Ministerio de Economía y Competitividad MAT2016-76507-R and Comunidad de Madrid S2018/NMT-4443 (Tec4Bio-CM).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

SARS-CoV-2 protein Nsp1 alters actomyosin cytoskeleton and phenocopies arrhythmogenic cardiomyopathy-related PKP2 mutant

  • Márquez-López, Cristina
  • Roche-Molina, Marta
  • García-Quintans, Nieves
  • Sacristán, Silvia
  • Siniscalco, David
  • González-Guerra, Andrés
  • Camafeita, Emilio
  • Lytvyn, Mariya
  • Guillén, María I.
  • Sanz-Rosa, David
  • Martín-Pérez, Daniel
  • Sánchez-Ramos, Cristina
  • Bernal, Juan Antonio
  • García García, Ricardo
Mutations in desmosomal Plakophilin-2 (PKP2) are the most prevalent drivers of arrhythmogenic cardiomyopathy (ACM) and a common cause of sudden cardiac death in young athletes. However, partner proteins that elucidate PKP2 cellular mechanism to understand cardiac dysfunction in ACM are mostly unknown. Here we identify the actin-based motor proteins Myh9 and Myh10 as key PKP2 interactors, and demonstrate that the expression of the ACM-related PKP2 mutant R735X alters actin fiber organization and cell mechanical stiffness. We also show that SARS-CoV-2 Nsp1 protein acts similarly to this known pathogenic R735X mutant, altering the actomyosin component distribution on cardiac cells. Our data reveal that the viral Nsp1 hijacks PKP2 into the cytoplasm and mimics the effect of delocalized R735X mutant. These results demonstrate that cytoplasmic PKP2, wildtype or mutant, induces the collapse of the actomyosin network, since shRNA-PKP2 knockdown maintains the cell structure, validating a critical role of PKP2 localization in the regulation of actomyosin architecture. The fact that Nsp1 and PKP2 mutant R735X share similar phenotypes also suggests that direct SARS-CoV-2 heart infection could induce a transient ACM-like disease in COVID-19 patients, which may contribute to right ventricle dysfunction, observed in patients with poor survival prognosis., The CNIC is supported by the Instituto de Salud Carlos III (ISCIII), the Ministerio de Ciencia e Innovación (MCIN) and the Pro CNIC Foundation, and is a Severo Ochoa Center of Excellence (SEV-2015-0505). This study was supported by MCIU grant BFU2016-75144-R. The study was also partially supported by the “Ayudas a la Investigación Cátedra Real Madrid-Universidad Europea” (2017/RM01). C.M-L. and S.S. hold MCIU predoctoral contracts BES-2017- 079715, and BES-2017-079707 respectively. RG acknowledges funding from the European Research Council under grant ERC-AG-340177 (3DNanoMech) and from the MCIU under grant MAT2016-76507-R., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multi-scale characterisation of a ferroelectric polymer reveals the emergence of a morphological phase transition driven by temperature

  • Hafner, Jonas
  • Benaglia, Simone
  • Richheimer, Filipe
  • Teuschel, Marco
  • Maier, Franz J.
  • Werner, Artner
  • Wood, Sebastian
  • Platz, Daniel
  • Schneider, Michael
  • Hradil, Klaudia
  • Castro, Fernando A.
  • García García, Ricardo
  • Schmid, Ulrich
[EN] Ferroelectric materials exhibit a phase transition to a paraelectric state driven by temperature - called the Curie transition. In conventional ferroelectrics, the Curie transition is caused by a change in crystal symmetry, while the material itself remains a continuous three-dimensional solid crystal. However, ferroelectric polymers behave differently. Polymeric materials are typically of semi-crystalline nature, meaning that they are an intermixture of crystalline and amorphous regions. Here, we demonstrate that the semi-crystalline morphology of the ferroelectric copolymer of vinylidene fluoride and trifluoroethylene (P(VDF-TrFE)) strongly affects its Curie transition, as not only a change in crystal symmetry but also in morphology occurs. We demonstrate, by high-resolution nanomechanical measurements, that the semicrystalline microstructure in the paraelectric state is formed by crystalline domains embedded into a softer amorphous phase. Using in situ X-ray diffraction measurements, we show that the local electromechanical response of the crystalline domains is counterbalanced by the amorphous phase, effectively masking its macroscopic effect. Our quantitative multiscale characterisations unite the nano- and macroscopic material properties of the ferroelectric polymer P(VDF-TrFE) through its semi-crystalline nature., European Union’s Horizon 2020 research and Innovation programme under the Marie Skłodowska-Curie grant agreement number 721874 (SPM2.0). RG acknowledges funding from the European Research Council ERC–AdG–340177 (3DNanoMech). This work was supported by the UK government’s Department for Business, Energy and Industrial Strategy. The dynamic mechanical analysis was supported by T. Koch from the Institute of Materials Science and Technology, TU Wien. We gratefully thank A. Muhamedagić for the contribution of artworks to the figures (armindesign.li)., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Standardized nanomechanical atomic force microscopy procedure (SNAP) for measuring soft and biological samples

  • Schillers, Hermann
  • Rianna, Carmela
  • Schape, Jens
  • Luque González, Tomás
  • Doschke, Holger
  • Walte, Mike
  • Uriarte, Juan José
  • Campillo, Noelia
  • Michanetzis, Georgios P. A.
  • Bobrowska, Justyna
  • Dumitru, Andra
  • Herruzo, Elena T.
  • Bovio, Simone
  • Parot, Pierre
  • Galluzzi, Massimiliano
  • Podestà, Alessandro
  • Puricelli, Luca
  • Scheuring, Simon
  • Missirlis, Yannis
  • Garcia, Ricardo
  • Odorico, Michael
  • Teulon, Jean-Marie
  • Lafont, Frank
  • Lekka, Malgorzata
  • Rico Camps, Félix
  • Rigato, Annafrancesca
  • Pellequer, Jean-Luc
  • Oberleithner, Hans
  • Navajas Navarro, Daniel
  • Radmacher, Manfred
We present a procedure that allows a reliable determination of the elastic (Young's) modulus of soft samples, including living cells, by atomic force microscopy (AFM). The standardized nanomechanical AFM procedure (SNAP) ensures the precise adjustment of the AFM optical lever system, a prerequisite for all kinds of force spectroscopy methods, to obtain reliable values independent of the instrument, laboratory and operator. Measurements of soft hydrogel samples with a well-defined elastic modulus using different AFMs revealed that the uncertainties in the determination of the deflection sensitivity and subsequently cantilever's spring constant were the main sources of error. SNAP eliminates those errors by calculating the correct deflection sensitivity based on spring constants determined with a vibrometer. The procedure was validated within a large network of European laboratories by measuring the elastic properties of gels and living cells, showing that its application reduces the variability in elastic moduli of hydrogels down to 1%, and increased the consistency of living cells elasticity measurements by a factor of two. The high reproducibility of elasticity measurements provided by SNAP could improve significantly the applicability of cell mechanics as a quantitative marker to discriminate between cell types and conditions.