Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Gold nanoparticle triggered dual optoplasmonic-impedimetric sensing of prostate-specific antigen on interdigitated porous silicon platforms

  • Rodríguez, C.
  • Torres Costa, Vicente
  • Ahumada, O.
  • Cebrián, V.
  • Gómez-Abad, C.
  • Díaz, A.
  • Manso Silván, Miguel
A porous silicon (PSi) platform with interdigitated NiCr electrodes has been used for the impedimetric biosensing of prostate specific antigen (PSA), a cancer biomarker. The first step involved the formation of a conductive PSi structure through the ion beam creation of 200 nm deep interdigitated slots, followed by their filling with NiCr electrodes deposited by plasma sputtering. In the second step a biorecognition interface was formed by modification of the PSi surface with (3-Glycidyloxypropyl)-trimethoxysilane. A sandwich assay was performed in which PSA was first recognized by a surface-anchored antibody and then by a secondary antibody tethered to 100 nm gold nanoparticles (GNPs). The changes in the impedance upon analyte binding at different concentrations have been monitored showing that the PSA concentration exhibits a linear dependence with the series resistance defined from the device equivalent circuit. A limit of detection in the range of 1 ng/mL PSA has been determined. A dark-field study of the PSi surface after the sandwich bioassay allowed an optoplasmonic demonstration of the increasing density of GNPs at higher PSA concentrations, which was confirmed by using scanning electron microscopy. The results confirm the dual optoplasmonic-electric labelling effect of the 100 nm GNPs and their role in an internally controlled detection of PSA., We acknowledge MSC funding provided by the European Commission through FPVII grant THINFACE (ITN GA 607232)
Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Porous silicon bragg reflector and 2D gold-polymer nanograting: a route towards a hybrid optoplasmonic platform

  • Pellacani, Paola
  • Fornasari, Lucia
  • Rodriguez, Chloé
  • Torres Costa, Vicente
  • Marabelli, Franco
  • Manso Silván, Miguel
Photonic and plasmonic systems have been intensively studied as an effective means to modify and enhance the electromagnetic field. In recent years hybrid plasmonic–photonic systems have been investigated as a promising solution for enhancing light-matter interaction. In the present work we present a hybrid structure obtained by growing a plasmonic 2D nanograting on top of a porous silicon distributed Bragg reflector. Particular attention has been devoted to the morphological characterization of these systems. Electron microscopy images allowed us to determine the geometrical parameters of the structure. The matching of the optical response of both components has been studied. Results indicate an interaction between the plasmonic and the photonic parts of the system, which results in a localization of the electric field profile, This research was funded by the EU Commission through FP7 action THINFACE ITN GA 607232 and Ministerio de Ciencia, Innovación y Universidades (Spain) through RETOS action CTQ2017-84309-C2-2-R
Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Biofunctional porous silicon micropatterns engineered through visiblelight activated epoxy capping and selective plasma etching

  • Rodríguez, C.
  • Ahumada, O.
  • Cebrián, V.
  • Torres Costa, Vicente
  • Manso Silván, Miguel
Porous silicon (PSi) is a versatile matrix with tailorable surface reactivity, which allows processing adiversity of biofunctional structures. An assembly process has been activated by catalyzing PSi oxidationwith visible light, enabling subsequent binding with (3-glycidyloxypropyl)-trimethoxy-silane (GPTMS) inthe submonolayer regime. A multispectroscopic approach has been followed to fully characterize thesurface capped PSi. XPS has been used to trace the process of light induced oxidation and GPTMS as-sembly on supported PSi. Field emission SEM confirms that the surface topography is not modified by theactivated assembly. To complement the chemical analysis of the bound GPTMS, FTIR and solid state NMRwere used on functionalized PSi particles. Finally, the surfaces of GPTMS capped PSi have been suc-cessfully micropatterned by a masked Ar plasma etching process. The process gives rise to surface hy-drophilic/hydrophobic contrasts, which are efficient in the selective binding of activated goldnanoparticles. The contrasts were applied to the local recognition of mouse serum proteins adsorbed onGPTMS functionalized PSi through an immunofluorescence assay. The results confirm the effectiveness ofGPTMS capped PSi as adsorptive layer for immunosensing, We acknowledge MSC funding provided by the European Commission through FPVII grant THINFACE(ITN GA 607232).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interplay between steps and oxygen vacancies on curved TiO2(110)

  • Miccio, Luis A.
  • Abadia, Mikel
  • Piquero-Zulaica, Ignacio
  • Lobo-Checa, Jorge
  • Schiller, Frederik
  • Rogero, Celia
  • Sánchez-Portal, Daniel
  • Ortega, J. Enrique
et al., A vicinal rutile TiO(110) crystal with a smooth variation of atomic steps parallel to the [1-10] direction was analyzed locally with STM and ARPES. The step edge morphology changes across the samples, from [1-11] zigzag faceting to straight [1-10] steps. A step-bunching phase is attributed to an optimal (110) terrace width, where all bridge-bonded O atom vacancies (O vacs) vanish. The [1-10] steps terminate with a pair of 2-fold coordinated O atoms, which give rise to bright, triangular protrusions (S) in STM. The intensity of the Ti 3d-derived gap state correlates with the sum of O vacs plus S protrusions at steps, suggesting that both O vacs and steps contribute a similar effective charge to sample doping. The binding energy of the gap state shifts when going from the flat (110) surface toward densely stepped planes, pointing to differences in the Ti polaron near steps and at terraces., We acknowledge financial support from the Spanish Ministry of Economy (Grants MAT2013-46593-C6-4-P and MAT2013-46593-C6-2-P) and the Basque Government (Grant IT621-13 and IT756-13). M.S. and U.D. acknowledge support from the ERC Advanced Grant “OxideSurfaces”. D.S.P. and M.M. acknowledge support from the Marie Curie ITN “THINFACE” and financial support by the Deutsche Forschungsgemeinschaft. through SFB 1083 “Structure and Dynamics of Internal Interfaces”., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chemisorption of Pentacene on Pt(111) with a Little Molecular Distortion

  • Ugolotti, Aldo
  • Harivyasi, Shashank S.
  • Baby, Anu
  • Domínguez, Marcos
  • Pinardi, Anna Lisa
  • López, María Francisca
  • Martín-Gago, José A.
  • Fratesi, Guido
  • Floreano, Luca
  • Brivio, Gian Paolo
We investigated the adsorption of pentacene on the (111) surface of platinum, which is an archetypal system for a junction with a low charge-injection barrier. We probed the structural and electronic configurations of pentacene by scanning tunnelling microscopy (STM), X-ray photoemission spectroscopy (XPS), and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy measurements. We simulated the interface by means of ab initio methods based on the density functional theory (DFT) framework, while including the dispersion forces. We found that the molecules adsorb at the bridge site of the close-compact atom rows with the long axis parallel to the substrate’s <110> directions, in a slightly distorted geometry, driven by the good match between the position of the carbon atoms of the molecule and the underlying lattice of the surface. Most importantly, a chemical bond is formed at the interface, which we attribute to the high chemical reactivity of the Pt substrate., This work was performed in the PCAM network of European doctorate. S.S.H. acknowledges support from the European Union Seventh Framework Programme under grant agreement no. 607232 (THINFACE) and the computing infrastructure at the Vienna Scientific Cluster. L.F. acknowledges financial support from CNR-INFN national project (PREMIALE 2012) EOS ’Organic Electronics for Innovative research instrumentation’. ESISNA group acknowledge funding from MAT2014-54231-C4-1-P., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of structural fluctuations on elastic lifetimes of adsorbate states: Isonicotinic acid on rutile(110)

  • Müller, Moritz
  • Sánchez-Portal, Daniel
  • Lin, He
  • Brivio, Gian Paolo
  • Selloni, Annabella
  • Fratesi, Guido
We sample ab initio molecular dynamics trajectories to address the impact of structural fluctuations on elastic lifetimes of adsorbate states at room temperature focusing on heterogeneous charge injection from isonicotinic acid as a key anchoring unit in dye-sensitized energy devices. Complementing related theoretical studies, we employ a Green's function technique based on density functional theory to account for a fully semi-infinite substrate of rutile TiO(110). We address the effect of a core-excitation enabling direct comparison with soft X-ray experiments. We find that room temperature fluctuations drastically improve the agreement with experimental lifetime measurements while the core-hole plays an important role shifting the spectra and reducing the electron vibrational coupling of the adsorbate states. Ultimately, the emerging resonance spectra highlight the role of the continuum of acceptor states in temperature broadened Voigt-type profiles., The authors acknowledge financial support from the European Union Seventh Framework Programme under Grant Agreement No. 607232 (THINFACE). D.S.-P. and M.M. acknowledge support from the Spanish Ministerio de Economia y Competitividad (MINECO) (Grant No. MAT2016-78293-C6-4-R), the Basque Dep. de Educacion, and the UPV/EHU (Grant No. IT-756-13). A.S. acknowledges support from DoEBES, Division of Chemical Science, Geosciences and Biosciences under Award No. DE-SC0007347., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning ultrafast electron injection dynamics at organic-graphene/metal interfaces

  • Ravikumar, Abhilash
  • Kladnik, Gregor
  • Müller, Moritz
  • Cossaro, Albano
  • Bavdek, Gregor
  • Patera, Laerte L.
  • Sánchez-Portal, Daniel
  • Venkataraman, Latha
  • Morgante, Alberto
  • Brivio, Gian Paolo
  • Cvetko, Dean
  • Fratesi, Guido
We compare the ultrafast charge transfer dynamics of molecules on epitaxial graphene and bilayer graphene grown on Ni(111) interfaces through first principles calculations and X-ray resonant photoemission spectroscopy. We use 4,4′-bipyridine as a prototypical molecule for these explorations as the energy level alignment of core-excited molecular orbitals allows ultrafast injection of electrons from a substrate to a molecule on a femtosecond timescale. We show that the ultrafast injection of electrons from the substrate to the molecule is ∼4 times slower on weakly coupled bilayer graphene than on epitaxial graphene. Through our experiments and calculations, we can attribute this to a difference in the density of states close to the Fermi level between graphene and bilayer graphene. We therefore show how graphene coupling with the substrate influences charge transfer dynamics between organic molecules and graphene interfaces., This project received funding from the European Union Seventh Framework Programme under grant agreement no. 607232 [THINFACE] and A. R. and M. M. are grateful for this. The work was performed within the PCAM European doctorate. G. K. and D. C. acknowledge support from the Slovenian Research Agency (P1-0112). A. C. acknowledges support from the ANCHOR project of the MIUR FIRB 2010. M. M. and D. S. P. acknowledge partial support from MINECO MAT2016-78293-C6-4-R. Support from MIUR (PRIN 20105ZZTSE) and MAE (US14GR12) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Directional sub-femtosecond charge transfer dynamics and the dimensionality of 1T-TaS2

  • Kühn, Danilo
  • Müller, Moritz
  • Sorgenfrei, Florian
  • Giangrisostomi, Erika
  • Jay, Raphael M.
  • Ovsyannikov, Ruslan
  • Mårtensson, Nils
  • Sánchez-Portal, Daniel
  • Föhlisch, Alexander
For the layered transition metal dichalcogenide 1T-TaS2, we establish through a unique experimental approach and density functional theory, how ultrafast charge transfer in 1T-TaS2 takes on isotropic three-dimensional character or anisotropic two-dimensional character, depending on the commensurability of the charge density wave phases of 1T-TaS2. The X-ray spectroscopic core-hole-clock method prepares selectively in- and out-of-plane polarized sulfur 3p orbital occupation with respect to the 1T-TaS2 planes and monitors sub-femtosecond wave packet delocalization. Despite being a prototypical two-dimensional material, isotropic three-dimensional charge transfer is found in the commensurate charge density wave phase (CCDW), indicating strong coupling between layers. In contrast, anisotropic two-dimensional charge transfer occurs for the nearly commensurate phase (NCDW). In direct comparison, theory shows that interlayer interaction in the CCDW phase - not layer stacking variations - causes isotropic three-dimensional charge transfer. This is presumably a general mechanism for phase transitions and tailored properties of dichalcogenides with charge density waves., AF acknowledges funding by the Helmholtz Virtual Institute VI 419 and the ERC Advanced Investigator Grant No. 669531 EDAX. NM acknowledges funding by the ERC Advanced Investigator Grant No. 321319 ESUX and support from the Carl Tryggers foundation for Scientifc Research CTS. DS-P and MM acknowledge funding from EU-FP7 project THINFACE (grant No. 607232), Spanish MINECO (grant No. MAT2016-78293-C6-4-R), and Basque Dep.de Educación and UPV/EHU (grant No. IT-756-13)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Effect of structural fluctuations on elastic lifetimes of adsorbate states: isonicotinic acid on rutile(110)

  • Müller, Moritz
  • Sánchez-Portal, Daniel
  • Lin, He
  • Brivio, Gian Paolo
  • Selloni, Annabella
  • Fratesi, Guido
Resumen del trabajo presentado al Symposium on Surface Science (3S), celebrado en St. Christoph am Arlberg (Austria) del 25 de febrero al 10 de marzo de 2018., We sample ab initio molecular dynamics trajectories to address the impact of structural fluctuations on elastic lifetimes of adsorbate states at room temperature focusing on heterogeneous charge injection from isonicotinic acid as a key anchoring unit in dyesensitized energy devices. Complementing related theoretical studies, we employ a Green's function technique based on density functional theory to account for a fully semi-infinite substrate of rutile TiO2(110). We explicitly address the effect of a core-excitation, thus enabling the comparison with soft X-ray experiments. We find that taking into account room temperature fluctuations drastically improves the agreement with the experimental lifetime measurements. The presence of a core-hole plays an important role shifting down in energy the spectra and reducing the electron-vibrational coupling of the adsorbate states. This last observation is probably related to the larger localization of the molecular resonance under the presence of a core-hole. The cumulative resonance spectra can be described by Voigt-type profiles obtained by convoluting a Lorentzian peak describing the electronic resonance with a Gaussian distribution modeling the temperature broadening. However, we found that in order to get an optimal description it is crucial to account for the energy dependence of the statistically averaged electronic widths. This energy dependence is dominated by the variation of the density of acceptor states in the substrate., We acknowledge financial support from EU FP7 under the grant agreement No. 607232 (THINFACE), the Spanish MINECO (Grant No. MAT2016-78293-C6-4-R), the Basque Dep. de Educación and the UPV/EHU (Grant No. IT-756-13). MM work was performed within the PCAM European doctorate., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Impact of moisture on efficiency-determining electronic processes in perovskite solar cells

  • Salado, Manuel
  • Contreras-Bernal, Lidia
  • Calió, Laura
  • Todinova, Anna
  • López-Santos, Carmen
  • Ahmad, Shahzada
  • Borrás, Ana
  • Idígoras, Jesús
  • Anta, Juan A.
Moisture-induced degradation in perovskite solar cells was thoroughly investigated by structural (SEM, EDS, XRD and XPS) and device characterization (impedance and intensity modulated photocurrent spectroscopy) techniques. Both the influence of the perovskite composition and the nature of the hole selective material were analyzed. The degradation rate was found to be significantly slower for mixed perovskites and P3HT-based devices. However, for a fixed degradation degree (defined as a 50% drop from the initial photocurrent), all configurations show similar features in small-perturbation analysis. Thus, a new mid-frequency signal appears in the impedance response, which seems to be related to charge accumulation at the interfaces. In addition, faster recombination, with a more important surface contribution, and slower transport were clearly inferred from our results. Both features can be associated with the deterioration of the contacts and the formation of a higher number of grain boundaries., We thank Junta de Andalucía for financial support via grant FQM 1851 and FQM 2310. We thank the Ministerio de Economía y Competitividad of Spain (MAT2013-47192-C3-3-R and MAT2016-76892-C3-2-R) and the EU through the Cohesion Fund and FEDER programs (MAT2013-42900-P and MAT2016-79866-R) for financial support and Red de Excelencia “Emerging photovoltaic Technologies”. SA and LC are thankful for the “Thinface” project from the European Union Seventh Framework Programme, under grant agreement no. 607232, for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Key role of the surface band structure in spin-dependent interfacial electron transfer: Ar/Fe(110) and Ar/Co(0001)

  • Müller, Moritz
  • Echenique, Pedro M.
  • Sánchez-Portal, Daniel
The injection of spin-polarized electrons across interfaces is central to many technologies, and hence, it is important to understand the main ingredients controlling it. Here, we demonstrate that the spin dependence of ultrafast electron transfer at Ar/Co(0001) and Ar/Fe(110) interfaces is rooted in the details of the spin-split surface band structures. The injection dynamics are particularly sensitive to the sizes (in reciprocal space) of projected electronic band gaps around Γ̅. Our ab initio calculations back that minority electrons are injected significantly faster than majority electrons in line with recently reported experimental injection times. A simple tunnelling model incorporating the spin-dependent gap sizes confirms that this ingredient is crucial to rationalize the experimental results., We acknowledge illuminating discussions with Prof. U. Heinzmann and Prof. P. Feulner, as well as financial support from the EU FP7 programme under Grant Agreement No. 607232 (THINFACE), the Spanish Ministerio de Ciencia, Innovacion y Universidades (Grant. No. MAT2016-78293-C6-4-R and Grant No. PID2019-107338RB-C66) and the Basque Dep. de Educacion and the UPV/EHU (Grant No. IT1246-19).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Theory of ultrafast electron transfer from localized quantum states at surfaces

  • Müller, Moritz
Doctoral Thesis Submitted to the University of the Basque Country for the Degree of Doctor in Physics., [EN]: The ability of materials to transfer electrons is a basic property controlling the functionality and performance of devices at the nanoscale. Of particular importance is the tranfor of electros at surfaces as a fundamental process in catalytic and photocatalytic applications. This work aims along these lines at a theoretical description of resonant charge injection at surfaces using a combination of density functional theory and Green's functions. A close comparison with available data from core-hole-clock experiments is maintained throughout the work and confirms the validity and predictive power of our first-principles approach. This is demonstrated on the basis of three prototypical systems where we study fundamental aspects of charge transfer, providing additional, often complementary information to the interpretation of the experiments. First, we present a detailed study of the effects of structural fluctuations on elastic charge transfer for isonicotinic acid adsorbed on rutile (110) in relation to photovoltaic applications. Second we explore spin-dependent charge injection from core-excited argon resonances on Co(0001) and Fe(110), with possible implications for spintronics. Third, we examine the directionality of charge transfer from sulfur related resonances at surfaces of layered 1T-TaS2 in the commensurate charge density wave phase., [ES]: Los procesos de transferencia de electrones son fundamentales tanto en la Naturaleza y como para gran cantidad de aplicaciones tecnológicas. Una comprensión detallada de su funcionamiento en la escala atómica es de gran importancia para el diseño de nuevos materiales y dispositivos. En particular, la transferencia de electrones tiene lugar en reacciones catalíticas y foto-catalíticas, así como en celdas electroquímicas y distintos dispositivos generadores de energía solar como las células solares “sensibilizadas” por colorantes (en inglés “dye-sensitized solar cells”, DSSCs). En este tipo de situaciones, con frecuencia la transferencia electrónica tiene lugar en una superficie o a través de una interfase, mientras el electrón transferido normalmente procede de una unidad química donora, como un átomo o una molécula absorbidos sobre o cercanos a dicha superficie. Las técnicas experimentales modernas son capaces de estudiar estos procesos en detalle, accediendo a sus escalas espaciales y temporales fundamentales (el nanometro y el femtosegundo). Sin embargo, en sistemas grandes y/o complejos diversos procesos pueden interferir, complicando la descripción. Por dicha razón es preferible estudiar sistemas sencillos que pueden ser estudiados tanto de forma teórica como experimental y comprendidos con modelos relativamente simples. La presente Tesis se ocupa de describir procesos elásticos de transferencia electrónica en superficies utilizando cálculos de primeros principios. En particular, desarrollamos un método que combina el uso funciones de Green con la información obtenida a partir de cálculos del funcional de la densidad (en inglés “density functional theory”, DFT) para realizar una descripción realista de los procesos de transferencia electrónica resonante en superficies. Los tiempos de transferencia de carga así calculados son comparados, con frecuencia de forma muy favorable, con los extraídos de experimentos que utilizan la técnica de espectroscopía “con cronometraje por hueco interno” (en inglés “core-hole-clock spectroscopy”)., I gratefully acknowledge the EU-FP7 project THINFACE (grant No. 607232) for financial support through Nanogune and training, the Spanish MINECO (grant No. MAT2016-78293-C6-4-R) for funding, the Centro de Física de Materiales (CFM) for providing work space, and the Donostia International Physics Center (DIPC) for financial support as well as computational time at the DIPC computing center and Daniel Franco as well as Diego Lasa for expert computational support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Interplay between steps and oxygen vacancies on curved TiO2(110)

  • Miccio, Luis A.
  • Setvin, Martin
  • Müller, Moritz
  • Abadia, Mikel
  • Piquero-Zulaica, Ignacio
  • Lobo-Checa, Jorge
  • Schiller, Frederik
  • Rogero, Celia
  • Schmid, Michael
  • Sánchez-Portal, Daniel
  • Diebold, Ulrike
  • Ortega, J. Enrique
Trabajo presentado al Symposium on Surface Science (3S), celebrado en St. Christoph am Arlberg (Austria) del 21 al 27 de febrero de 2016., We acknowledge financial support from the Spanish Ministry of Economy (grant MAT2013-46593-C6-4-P and MAT2013-46593-C6-2-P) and the Basque Government (grant IT621-13 and IT756-13), the ERC Advanced Grant “OxideSurfaces”., and the Marie Curie ITN “THINFACE”., Peer reviewed