Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Exploring the Boundaries of Connected Systems: Communications for Hard-to-Reach Areas and Extreme Conditions

  • Imran, Muhammad A.
  • Zennaro, Marco
  • Popoola, Olaoluwa R.
  • Chiaraviglio, Luca
  • Zhang, Hongwei
  • van de Beek, Jaap
  • Stewart, Robert
  • Cox, Mitchell Arij
  • Mendes, Luciano Leonel
  • Pietrosemoli, Ermanno
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Cellular communication standards have been established to ensure connectivity across most urban environments, complemented by deployment hardware and facilities tailored for city life. At the same time, numerous initiatives seek to broaden connectivity to rural and developing areas. However, with nearly half the global population still offline, there is an urgent need to drive research toward enhancing connectivity in areas and conditions that deviate from the norm. This article delves into innovative communication solutions not only for hard-to-reach and extreme environments but also introduces "hard-to-serve" areas as a crucial, yet underexplored, category within the broader spectrum of connectivity challenges.We explore the latest advancements in communication systems designed for environments subject to extreme temperatures, harsh weather, excessive dust, or even disasters such as fires. Our exploration spans the entire communication stack, covering communications on isolated islands, sparsely populated regions, mountainous terrains, and even underwater and underground settings. We highlight system architectures, hardware, materials, algorithms, and other pivotal technologies that promise to connect these challenging areas. Through case studies, we explore the application of 5G for innovative research, long range (LoRa) for audio messages and emails, LoRa wireless connections, free-space optics, communications in underwater and underground scenarios, delay-tolerant networks, satellite links, and the strategic use of shared spectrum and TV white space (TVWS) to improve mobile connectivity in secluded and remote regions. These studies also touch on prevalent challenges such as power outages, regulatory gaps, technological availability, and human resource constraints, where we introduce the concept of peri-urban hard-to-serve areas where populations might struggle with affordability or lack the skills for traditional connectivity solutions. This article provides an exhaustive summary of our research, showcasing how 6G and future networks will play a crucial role in delivering connectivity to areas that are hard-to-reach, hard-to-serve, or subject to extreme conditions (ECs)., This work was supported in part by Scotland 5G Centre; in part by the Department for Science, Innovation and Technology (DSIT) through the 5G Rural First (5GRF) Project; in part by the Engineering and Physical Sciences Research Council (EPSRC) U.K. for Future Telecom Hub under Grant CHEDDAR EP/X040518/1 and Grant CHEDDAR Uplift EP/Y037421/1; in part by xGMobile EMBRAPII-Inatel Competence Center on 5G and 6G Networks through the XGM-AFCCT-2024-2-15-1 Project; in part by the Ministério de Ciência, Tecnologia e Inovação (MCTI) through from Programas Prioritários Internet of Things (PPI IoT)/Manufatura 4.0 under Grant 052/2023; in part by the Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) under Grant 22/09319-9; in part by the Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq), Brazil; and in part by the Fundação de Amparo à Pesquisa do Estado de Minas Gerais (FAPEMIG) under Grant PPE-00124-23. The work of Hongwei Zhang was supported in part by NSF under Award 2336057, Award 2212573, Award 2229654, Award 2232461, Award 2112606, and Award 2130889; and in part by the National Institute of Food and Agriculture (NIFA) under Award 2021-67021-33775. The work of Jaap van de Beek was supported by Sweden s Innovation Agency Vinnova under Grant 2020-04136 . The work of Mitchell Arij Cox was supported by the South African National Research Foundation.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exceptionally large migration length of carbon and topographically-facilitated self-limiting molecular beam epitaxial growth of graphene on hexagonal boron nitride

  • Plaut, Annette S.
  • Wurstbauer, Ulrich
  • Wang, Sheng
  • Levy, Antonio L.
  • Wang, Lei
  • Pfeiffer, Loren N.
  • Watanabe, Kenji
  • Taniguchi, Takashi
  • Dean, Cory R.
  • Hone, James
  • Pinczuk, Aron
  • García Martínez, Jorge Manuel
We demonstrate growth of single-layer graphene (SLG) on hexagonal boron nitride (h-BN) by molecular beam epitaxy (MBE), only limited in area by the finite size of the h-BN flakes. Using atomic force microscopy and micro-Raman spectroscopy, we show that for growth over a wide range of temperatures (500 C e 1000 C) the deposited carbon atoms spill off the edge of the h-BN flakes. We attribute this spillage to the very high mobility of the carbon atoms on the BN basal plane, consistent with van der Waals MBE. The h-BN flakes vary in size from 30 mm to 100 mm, thus demonstrating that the migration length of carbon atoms on h-BN is greater than 100 mm. When sufficient carbon is supplied to compensate for this loss, which is largely due to this fast migration of the carbon atoms to and off the edges of the h-BN flake, we find that the best growth temperature for MBE SLG on h-BN is ~950 C. Selflimiting graphene growth appears to be facilitated by topographic h-BN surface features: We have thereby grown MBE self-limited SLG on an h-BN ridge. This opens up future avenues for precisely tailored fabrication of nano- and hetero-structures on pre-patterned h-BN surfaces for device applications., This work is supported by ONR (N000140610138 and Graphene MURI), AFOSR (FA9550-11-1-0010), EFRC Center for Re-Defining Photovoltaic Efficiency through Molecule Scale Control (award DE-SC0001085), NSF (CHE-0641523), NYSTAR and Spanish Government (AIC-B-2011-0806, MAT2014-54231, MAT2015-67021-R). S.W. and A.P. were supported by the US Department of Energy Office of Science, Division of Materials Science and Engineering (award DE-SC0010695)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Scanning tunneling spectroscopic monitoring of surface states role on water passivation of InGaAs uncapped quantum dots

  • Milla, María José
  • Hernández-Rodríguez, Irene
  • Méndez, Javier
  • García Martínez, Jorge Manuel
  • Ulloa, José M.
  • Guzmán, Álvaro
A detailed local analysis of the impact of water coverage on the density of surface states in In0.5Ga0.5As surface nanostructures is reported by spectroscopy monitoring the surface conductivity at the nanometer-scale. A correlation between the changes of the surface conductivity and the variation of the density of surface states under different environmental conditions is found in terms of I–V characteristics and scanning tunneling spectroscopy. From dry to humid conditions the surface conductivity of a three-dimensional In0.5Ga0.5As uncapped nanostructured surface increases monotonically with the reduction of the density of available surface states. In contrast, neither the electrical properties nor the density of electrically active surface states of a surface quantum well exhibit any significant dependence on the external moist conditions. The adsorption of water molecules onto the surface passivates the surface states leading to an improvement in the electron transport. These results clearly reveal that the density of surface states depends on the dimensionality of a nanostructured surface and demonstrate the important role of these states for nanoengineering sensing devices., This work has been supported by the following projects: MAT2011-26534, MAT2014-54231-C4-1-P, AIC-B-2011-0806, MAT2015-67021-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

System for manufacturing complete Cu(In,Ga)Se2 solar cells in situ under vacuum

  • Fuster, David
  • Anacleto, Pedro
  • Virtuoso, Jose
  • Zutter, Marco
  • Brito, Daniel
  • Alves, Marina
  • Aparicio, Luis
  • Fuertes Marrón, D.
  • Briones Fernández-Pola, Fernando
  • Sadewasser, Sascha
  • García Martínez, Jorge Manuel
We present the development of a small foot-print physical vapor deposition (PVD) system for in-situ deposition of all layers required in a complete Cu(In,Ga)Se (CIGS) solar cell. Seven sputtering magnetrons and one valved-cracker source have been custom designed and manufactured for this system, named SpuTtering for Advanced Research (STAR). The purpose of STAR is to develop a technique to fabricate a complete CIGS solar cell, including contacts, absorber, buffer, and window layers, under high vacuum with the aim to transfer this technology to a future industrial production line. The system's capabilities and its relatively high throughput place it somewhere in between research and industrial development levels. It is possible to work on the deposition of the back contact, the CIGS absorber, and the window layer of three solar cells simultaneously. Calibration data, selection of parameters for the deposition of the individual layers, and initial results of a complete CIGS solar cell developed with STAR are reported., We acknowledge financial support by the Spanish projects AIC-B-2011-0806 and MAT2015-67021-R, and by the “Micro-concentrator thin film solar cells (MiconCell)” project (028922), and the “Correlated Analysis of Inorganic Solar Cells in and outside an Electron Microscope (CASOLEM)” project (028917), both co-funded by FCT and the ERDF through COMPETE2020. We also acknowledge financial support by MCIU-AEI-FEDER-UE (ENE2017-91092-EXP, RTI2018-096937-B-C22) and Comunidad de Madrid (P2018/EMT-4308). We acknowledge the services at IMN-CNM from the X-SEM Laboratory (MINECO CSIC13-4E-1794) and from MiNa Laboratory (funding from CM under project S2013/ICE-2822, Space-Tec) both with support from EU (FEDER, FSE)”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optimization of a carbon evaporator cell for MBE growth

  • Fuster, David
  • González Díez, Yolanda
  • González Sotos, Luisa
  • Méndez, Javier
  • García, F.
  • Córdoba-Cabanillas, J. L.
  • Dotor-Castilla, María Luisa
  • Álvaro Bruna, Raquel
  • Torné, Lorena
  • García Martínez, Jorge Manuel
A new design of carbon source using a S-shaped glassy carbon filament for p-doping and carbon deposition is presented. Due to the higher resistivity of the glassy carbon, lower current is needed to produce the same flux as in a source based on pyrolytic graphite filament. The source design is very compact and the use of water cooling is not mandatory. The results and simulations of the new design show a higher flux than the previously reported glassy carbon based source while avoiding hot spots that can cause an early filament degradation. Hole mobility vs doping level relation data on p-doped GaAs layers grown by molecular beam epitaxy using this new carbon source are shown. With this new C source GaAs (001) surface morphology flatness is preserved after depositing C, showing a reduced substrate heating radiation essential for operate in III-V solid source molecular beam epitaxy (MBE) systems., The authors wish to acknowledge the financial support by the Spanish MINECO (MAT2015-67021-R), by MCIU-AEI-FEDER-UE (ENE2017-91092-EXP, RTI2018-096937-B-C22) and by Comunidad de Madrid (P2018/EMT-4308). We acknowledge the service from the MiNa Laboratory at IMN, funding from CM (project S2018/NMT-4291 TEC2SPACE), and from the X-SEM Laboratory, funding from MINECO (project CSIC13-4E-1794), both with support from EU (ERDF, ESF).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Spherical gallium nanodroplets

  • García Martínez, Jorge Manuel
  • Fuster, David
  • Dotor-Castilla, María Luisa
  • Méndez, Javier
  • González Díez, Yolanda
Trabajo presentado en el 21st European Workshop on Molecular Beam Epitaxy (EuroMBE 2023), celebrado en Madrid (España), del 16 al 19 de abril de 2023, Gallium (Ga) nanoparticles has unique characteristics that could enable new devices based on phase changes, such as optical switches and memories and active plasmonic platforms [1]. Gallium is also a very interesting material for its biocompatibility properties and many other applications [2]. We show the fabrication by MBE of gallium nanodroplets on GaAs(001) by droplet epitaxy [3, 4]. Furthermore, it is possible to control the shape of the nanodroplets by changing the wettability of Ga over the surface by evaporation of one monolayer of carbon [3] prior to the droplet formation. This effect is used for obtaining almost perfectly spherical Ga nanodroplets on GaAs and could be used in many other substrates. We acknowledge the following projects: MAT2015-67021-R, S2018/NMT-4291 TEC2SPACE, CSIC13- 4E-1794, RTI2018-096937-B-C22, PID2021-124193OB-C22 and P2018/EMT-4308. References [1] Maria Losurdo, et al., ¿Thermally stable coexistence of liquid and solid phases in gallium nanoparticles¿, Nature Mat., Vol. 15, pp. 995-1002, 2016. [2] Michael D. Dickey, ¿Liquid metals at room temperature¿, Physics Today Vol. 74, 4, pp. 30- 36, 2021. [3] D. Fuster et al., ¿Optimization of a carbon evaporator cell for MBE growth¿, Vacuum, Vol. 181, pp. 109653(1)-109653(8), 2020. [4] D. Fuster, et al., ¿Fundamental role of arsenic flux in nanohole formation by Ga droplet etching on GaAs (001),¿ Nanoscale Res Lett. Vol. 9, pp. 309(1)-309(6), 2014., Service from the MiNa Laboratory at IMN (funding from CM), X-SEM Laboratory and funding projects MAT2015-67021-R, S2018/NMT-4291, TEC2SPACE, CSIC13-4E-1794, RTI2018-096937-B-C22, PID2021-124193OB-C22 and P2018/EMT-4308
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Development of a serum-free medium to aid large-scale production of mycoplasma-based therapies

  • Burgos, Raul
  • Garcia-Ramallo, Eva
  • Shaw, Daniel
  • Lluch-Senar, Maria
  • Serrano, Luis
This work has been supported by the European Union’s Horizon 2020 research and innovation program under grant agreement 634942 (MycoSynVac), the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program under grant agreement 670216 (MYCOCHASSIS), and Conveni La Caixa 2020-2023 (LA CAIXA-EGA, LCF/PR/GN13/10260009). We also acknowledge the support of the Spanish Ministry of Science and Innovation to the EMBL partnership, the Centro de Excelencia Severo Ochoa, and the CERCA Program from the Generalitat de Catalunya. We also acknowledge the staff of the CRG Genomics Unit for performing RNA-seq library preparation and sequencing. The proteomics analyses were performed in the CRG/UPF Proteomics Unit, which is part of the Proteored, PRB3, and is supported by grant PT17/0019 of the PE I1D1i 2013-2016, funded by ISCIII and ERDF. We also thank Jetta Bijlsma and Tjerko Kamminga for sharing the nonpathogenic J. strain of M. hyopneumoniae. Patent applications were filed for the M. pneumoniae (WO2021078935) and M. hyopneumoniae (WO2021078938) serum-free media. Luis Serrano and Maria Lluch-Senar are cofounders of Pulmobiotics Ltd., and Maria Lluch-Senar is currently an employee of this company., To assist in the advancement of the large-scale production of safe Mycoplasma vaccines and other Mycoplasma-based therapies, we developed a culture medium free of animal serum and other animal components for Mycoplasma pneumoniae growth. By establishing a workflow method to systematically test different compounds and concentrations, we provide optimized formulations capable of supporting serial passaging and robust growth reaching 60 to 70% of the biomass obtained in rich medium. Global transcriptomic and proteomic analysis showed minor physiological changes upon cell culture in the animal component-free medium, supporting its suitability for the production of M. pneumoniae-based therapies. The major contributors to growth performance were found to be glucose as a carbon source, glycerol, cholesterol, and phospholipids as a source of fatty acids. Bovine serum albumin or cyclodextrin (in the animal component-free medium) were required as lipid carriers to prevent lipid toxicity. Connaught Medical Research Laboratories medium (CMRL) used to simplify medium preparation as a source of amino acids, nucleotide precursors, vitamins, and other cofactors could be substituted by cysteine. In fact, the presence of protein hydrolysates such as yeastolate or peptones was found to be essential and preferred over free amino acids, except for the cysteine. Supplementation of nucleotide precursors and vitamins is not strictly necessary in the presence of yeastolate, suggesting that this animal origin-free hydrolysate serves as an efficient source for these compounds. Finally, we adapted the serum-free medium formulation to support growth of Mycoplasma hyopneumoniae, a swine pathogen for which inactivated whole-cell vaccines are available., info:eu-repo/semantics/publishedVersion