Skip to main content

GRAFENO Y OTRAS ARQUITECTURAS 2D MEDIANTE QUIMICA EN SUPERFICIE: CRECIMIENTO Y PROPIEDADES

BES-2015-072642

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprogram Subprograma Estatal de Formación
Call Contratos Predoctorales
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Reactividad química del para-aminofenol en superficies metálicas. Nuevos mecanismos de síntesis sobre superficies

  • Ruiz del Árbol, Nerea
[ES] En los últimos años se ha desarrollado una nueva metodología de síntesis denominada ‘síntesis en superficie’ que usa una estrategia bottom-up para inducir acoplamientos covalentes entre unidades moleculares utilizando como soporte y área de confinamiento una superficie. Esta metodología ha demostrado ser una ruta innovadora, rápida y eficiente para obtener nuevos materiales 0D, 1D y 2D. Sin embargo, al ser un método de síntesis relativamente nuevo, se desconocen sus mecanismos de reacción lo que limita su control. Teniendo en cuenta estas premisas, el objetivo del trabajo doctoral ha sido diseñar y explorar nuevas rutas de acoplamiento para obtener nuevos materiales, utilizando las propiedades únicas de las superficies. Para ello, hemos estudiado el papel de la superficie en la reactividad química de la molécula para-aminofenol en Cu(110), Pt(111) y Cu(111). Este estudio nos ha permitido analizar el comportamiento físico-químico de los grupos funcionales amino y alcohol en función de la orientación y naturaleza de la superficie, proporcionando información fundamental acerca de los procesos únicos que ocurren en la superficie, los cuales inducen nuevos mecanismos de acoplamientos. Según los resultados obtenidos hemos comprobado que el diferente comportamiento de la molécula para-aminofenol dependiendo de la orientación y naturaleza de la superficie metálica induce la formación de distintos nanomateriales con distinta naturaleza y dimensionalidad a través de mecanismos no descritos con anterioridad. Estos resultados nos ayudan a alcanzar mayor control de los acoplamientos entre las unidades de construcción, lo que es de gran relevancia para el diseño de futuros nanomateriales., [EN] In recent years, a new methodology called ‘On surface synthesis’ has been developed. Following a bottom-up strategy, On surface synthesis use a surface as support and confinement area to induce the covalent coupling between the molecular units. This methodology has proven to be a powerful, efficient and innovative route to obtain 0D, 1D and 2D materials. However, being a relatively new synthesis method, its reaction mechanisms are unknown, which limits its control. Taking this into account, the aim of this thesis is to explore and design new covalent coupling routes, using surface properties, to achieve new nanomaterials. We have investigated the role of the surface in the chemical reactivity of the para-aminophenol molecule for Cu (110), Pt (111) and Cu (111) and studied the physical-chemical behavior of the amino and alcohol functional groups as a function of the orientation and nature of the surface. This study provides fundamental information about the unique processes that occur on surfaces and lead to new coupling mechanisms. According to the findings, we have verified that the different behavior of the para-aminophenol molecule according to the orientation and nature of the metallic surface induces the formation of different nanomaterials with different nature and different dimensionality. These results help us to gain control of the couplings between the molecular units, which is of great relevance for the design of future nanomaterials., Peer reviewed, Se ofrece una versión con mayor resolución en figuras.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Role of the Metal Surface on the Room Temperature Activation of the Alcohol and Amino Groups of p-Aminophenol

  • Ruiz del Árbol, Nerea
  • Palacio, Irene
  • Sánchez-Sánchez, Carlos
  • Otero, Gonzalo
  • Martínez, José I.
  • Rodríguez, Luis
  • Serrate, David
  • Cossaro, Albano
  • Lacovig, Paolo
  • Lizzit, Silvano
  • Verdini, Alberto
  • Floreano, Luca
  • Martín-Gago, José A.
  • López, María Francisca
[en] We present a comparative study of the room-temperature adsorption of p-aminophenol (p-AP) molecules on three metal surfaces, namely Cu(110), Cu(111), and Pt(111). We show that the chemical nature and the structural symmetry of the substrate control the activation of the terminal molecular groups, which result in different arrangements of the interfacial molecular layer. To this aim, we have used in situ STM images combined with synchrotron radiation high-resolution XPS and NEXAFS spectra, and the results were simulated by DFT calculations. On copper, the interaction between the molecules and the surface is weaker on the (111) surface crystal plane than on the (110) one, favoring molecular diffusion and leading to larger ordered domains. We demonstrate that the p-AP molecule undergoes spontaneous dehydrogenation of the alcohol group to form phenoxy species on all the studied surfaces; however, this process is not complete on the less reactive surface, Cu(111). The Pt(111) surface exhibits stronger molecule¿surface interaction, inducing a short-range ordered molecular arrangement that increases over time. In addition, on the highly reactive Pt(111) surface other chemical processes are evidenced, such as the dehydrogenation of the amine group., This work was supported by the Spanish MINECO (Grant MAT2017-85089-C2-1-R) and the EU via the ERC-Synergy Program (Grant ERC-2013-SYG-610256 NANOCOSMOS). The authors thank “Comunidad de Madrid” for its support of the FotoArt-CM project (S2018/NMT-4367) through the Program of R&D activities between research groups in Technologies 2018, cofinanced by European Structural Funds. N.R. acknowledges support from the FPI program of Spanish MINECO (BES-2015-072642). C.S.S. acknowledges MCIU for the “Ramón y Cajal” contract (RYC2018-024364-I). G.O.-I. thanks FCT for his contract (IF/01054/2015). The use of the infrastructure at the Advanced Microscopy Laboratory (LMA) is acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On-Surface Driven Formal Michael AdditionProduces m-PolyanilineOligomers on Pt (111)

  • Ruiz del Árbol, Nerea
  • Sánchez-Sánchez, Carlos
  • Otero, Gonzalo
  • Martínez, José I.
  • Andrés, Pedro L. de
  • Gómez-Herrero, Ana C.
  • Merino, Pablo
  • Piantek, Marten
  • Serrate Donoso, David
  • Lacovig, Paolo
  • Lizzit, Silvano
  • Alemán, José
  • Ellis, Gary James
  • López, María Francisca
  • Martín-Gago, José A.
[EN] On-surface synthesis is emerging as a highly rational bottom-up methodology for the synthesis of molecular structures that are unattainable or complex to obtain by wet chemistry. Here, oligomers of meta-polyaniline, a known ferromagnetic polymer, were synthesized from para-aminophenol building-blocks via an unexpected and highly specific on-surface formal 1, 4 Michael-type addition at the meta position, driven by the reduction of the aminophenol molecule. We rationalize this dehydrogenation and coupling reaction mechanism with a combination of in situ scanning tunneling and non-contact atomic force microscopies, high-resolution synchrotron-based X-ray photoemission spectroscopy and first-principles calculations. This study demonstrates the capability of surfaces to selectively modify local molecular conditions to redirect well-established synthetic routes, such as Michael coupling, towards the rational synthesis of new covalent nanostructures., Spanish MINECO(MAT2017-85089-C2-1-R, RYC-2015–17730), European Research Council (ERC) under contract (ERC-2013-SYG-610256 NANOCOSMOS), Comunidad de Madrid via Programa de InvestigaciónTecnologías 2018 (FOTOART-CMS2018/NMT-4367), and the innovation program under grantagreements 785219 and 881603 (GrapheneCore2 and Gra-pheneCore3-Graphene-based disruptive technologies,re-spectively). CSS acknowledges MCIU for the “RamnyCajal” contract (RYC2018-024364-I). NRdA is grateful tothe Spanish MINECO for support from the FPI program(BES-2015–072642), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On-Surface Thermal Stability of a Graphenic Structure Incorporating a Tropone Moiety

  • Márquez, Irene R.
  • Ruiz del Árbol, Nerea
  • Urgel, José I.
  • Villalobos, Federico
  • Fasel, Román
  • López, María Francisca
  • Cuerva, Juan M.
  • Martín-Gago, José A.
  • Campaña, Araceli G.
  • Sánchez-Sánchez, Carlos
[EN] On-surface synthesis, complementary to wet chemistry, has been demonstrated to be a valid approach for the synthesis of tailored graphenic nanostructures with atomic precision. Among the different existing strategies used to tune the optoelectronic and magnetic properties of these nanostructures, the introduction of non-hexagonal rings inducing out-of-plane distortions is a promising pathway that has been scarcely explored on surfaces. Here, we demonstrate that non-hexagonal rings, in the form of tropone (cycloheptatrienone) moieties, are thermally transformed into phenyl or cyclopentadienone moieties upon an unprecedented surface-mediated retro–Buchner-type reaction involving a decarbonylation or an intramolecular rearrangement of the CO unit, respectively., We acknowledge the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (ERC-2015-STG-677023 and ERC-2013-SYG-610256 NANOCOSMOS) and the innovation program under grant agreement No. 696656 (GrapheneCore1-Graphene-based disruptive technologies) and grant agreement No. 785219 (GrapheneCore2-Graphenebased disruptive technologies) for financial support. Grants PGC2018-101181-B-I00 and MAT2017- 85089-C2-1-R funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” by the “European Union”, and grant PID2020-113142RB-C21 funded by MCIN/AEI/ 10.13039/501100 011033 also provided financial support. We also acknowledge Comunidad de Madrid via Programade Investigación Tecnologías 2018 (FOTOART-CM S2018/NMT-4367), the Swiss National Science Foundation (grant number 200020-182015), the NCCR MARVEL funded by the Swiss National Science Foundation (grant number 51NF40-182892) and FEDER/Junta de Andalucía-Consejería de Economía y Conocimiento (B-FQM-428-UGR20). C. S. S. and N. R. A. acknowledge Grants RYC2018-024364-I and BES-2015-072642, respectively, funded by MCIN/AEI/ 10.13039/501100011033 and “ESF Investing in your future”. I. R. M. acknowledges the University of Granada for her postdoctoral contract (Contrato Puente-Plan Propio UGR). F.V. thanks Ministerio de Universidades for the FPU grant (FPU18/05938)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On-surface synthesis of metal–organic frameworks: the critical role of the reaction conditions

  • Ruiz del Árbol, Nerea
  • Sánchez-Sánchez, Carlos
  • Martínez, José I.
  • Rodríguez, Luis M.
  • Serrate, David
  • Verdini, Alberto
  • Floreano, Luca
  • Jacobson, Peter
  • Grill, Leonhard
  • Martín-Gago, José A.
  • López, María Francisca
Two different metal–organic frameworks with either a honeycomb or Kagome structure were grown on Cu(111) using para-aminophenol molecules and native surface adatoms. Although both frameworks are made up from the same chemical species, they are structurally different emphasizing the critical role being played by the reaction conditions during their growth. This work highlights the importance of the balance between thermodynamics and kinetics in the final structure of surface-supported metal–organic networks., This work was supported by the FotoArt-CM (S2018/NMT-4367) and FotoSurf-CM (Proyectos Sinérgicos I+D, Y2020/NMT-6469) projects funded by the “Comunidad de Madrid” and co-financed by European Structural Funds, and by grants PID2020-113142RB-C21, funded by MCIN/AEI/10.13039/501100011033, and PLEC2021-007906 and TED2021-129999B-C31, funded by MCIN/AEI/10.13039/501100011033 and the “European Union NextGenerationEU/PRTR”. CSS acknowledges grant RYC2018-024364-I funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future” and NRdA the Spanish MINECO for support from the FPI program (BES-2015-072642)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Contribución de congreso (ConferenceOutput)

On-surface synthesis of metal–organic frameworks: the critical role of the reaction conditions

  • Ruiz del Árbol, N.
  • Sánchez-Sánchez, C.
  • Martínez, J. I.
  • Rodríguez, L.
  • Serrate, D.
  • Verdini, A.
  • Floreano, L.
  • Jacobson, P.
  • Grill, L.
  • Martín-Gago, J. A.
  • López, M. F.
Two different metal–organic frameworks with either a honeycomb or Kagome structure were grown on Cu(111) using para-aminophenol molecules and native surface adatoms. Although both frameworks are made up from the same chemical species, they are structurally different emphasizing the critical role being played by the reaction conditions during their growth. This work highlights the importance of the balance between thermodynamics and kinetics in the final structure of surface-supported metal–organic networks.