Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Stealth Acoustic Materials

  • Romero-García, Vicente|||0000-0002-3798-6454
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Lamothe, N.
  • Theocharis, G.
  • Richoux, O.
[EN] We report the experimental design of a one-dimensional stealth acoustic material, namely a material that suppresses the acoustic scattering for a given set of incident wave vectors. The material consists of multiple scatterers, rigid diaphragms, located in an air-filled acoustic waveguide. The position of the scatterers has been chosen such that in the Born approximation a suppression of the scattering for a broad range of frequencies is achieved and thus a broadband transparency. Experimental results are found in excellent agreement with the theory despite the presence of losses and the finite size of the material, features that are not captured in the theory. This robustness as well as the generality of the results motivates realistic potential applications for the design of transparent materials in acoustics and other fields of wave physics., This work has been funded by RFI Le Mans Acoustique (Region Pays de la Loire) in the framework of the APA-MAS project, by the project HYPERMETA funded under the program Etoiles Montantes of the Region Pays de la Loire as well as by the Ministerio de Economia y Competitividad (Spain) and European Union FEDER through project FIS2015-65998-C2-2-P. V. Romero-Garcia and L. M. Garcia-Raffi acknowledge the short-term scientific mission (STSM) funded by the COST (European Cooperation in Science and Technology) Action DENORMS - CA15125.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Scattering Evaluation of Equivalent Surface Impedances of Acoustic Metamaterials in Large FDTD Volumes Using RLC Circuit Modelling

  • Ballestero, Eric
  • Hamilton, Brian
  • Romero-García, Vicent
  • Groby, Jean Philippe
  • Aygun, Haydar
  • Dance, Stephen
  • Jimenez, Noe|||0000-0002-6539-670X
[EN] Most simulations involving metamaterials often require complex physics to be solved through refined meshing grids. However, it can prove challenging to simulate the effect of local physical conditions created by said metamaterials into much wider computing sceneries due to the increased meshing load. We thus present in this work a framework for simulating complex structures with detailed geometries, such as metamaterials, into large Finite-Difference Time-Domain (FDTD) computing environments by reducing them to their equivalent surface impedance represented by a parallel-series RLC circuit. This reduction helps to simplify the physics involved as well as drastically reducing the meshing load of the model and the implicit calculation time. Here, an emphasis is made on scattering comparisons between an acoustic metamaterial and its equivalent surface impedance through analytical and numerical methods. Additionally, the problem of fitting RLC parameters to complex impedance data obtained from transfer matrix models is herein solved using a novel approach based on zero crossings of admittance phase derivatives. Despite the simplification process, the proposed framework achieves good overall results with respect to the original acoustic scatterer while ensuring relatively short simulation times over a vast range of frequencies., The collaboration between the authors of this article was made possible thanks to European Cooperation in Science and Technology (COST) Action CA15125 -Design in Noise Reducing Materials (DENORMS). This study was financed by the Royal Opera House, Covent Garden, and the United Kingdom Acoustics Network (UKAN). The authors gratefully acknowledge the ANR-RGC METARoom (ANR-18-CE08-0021) project and the project HYPERMETA funded under the program Etoiles Montantes of the Region Pays de la Loire. N.J. acknowledges financial support from the Spanish Ministry of Science, Innovation and Universities through grant "Juan de la Cierva-Incorporacion" (IJC2018-037897-I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Limits of flexural wave absorption by open lossy resonators: reflection and transmission problems

  • Leng, J.
  • Gautier, F.
  • Pelat, A.
  • Groby, J-P
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Romero-García, Vicente|||0000-0002-3798-6454
[EN] The limits of flexural wave absorption by open lossy resonators are analytically and numerically reported in this work for both the reflection and transmission problems. An experimental validation for the reflection problem is presented. The reflection and transmission of flexural waves in 1D resonant thin beams are analyzed by means of the transfer matrix method. The hypotheses, on which the analytical model relies, are validated by experimental results. The open lossy resonator, consisting of a finite length beam thinner than the main beam, presents both energy leakage due to the aperture of the resonators to the main beam and inherent losses due to the viscoelastic damping. Wave absorption is found to be limited by the balance between the energy leakage and the inherent losses of the open lossy resonator. The perfect compensation of these two elements is known as the critical coupling condition and can be easily tuned by the geometry of the resonator. On the one hand, the scattering in the reflection problem is represented by the reflection coefficient. A single symmetry of the resonance is used to obtain the critical coupling condition. Therefore the perfect absorption can be obtained in this case. On the other hand, the transmission problem is represented by two eigenvalues of the scattering matrix, representing the symmetric and anti-symmetric parts of the full scattering problem. In the geometry analyzed in this work, only one kind of symmetry can be critically coupled, and therefore, the maximal absorption in the transmission problem is limited to 0.5. The results shown in this work pave the way to the design of resonators for efficient flexural wave absorption., The authors thank Mathieu Secail-Geraud and Julien Nicolas for the development of the experimental set-up. The work has been founded by the RFI Le Mans Acoustic (Region Pays de la Loire) within the framework of the Metaplaque project. This article is based upon work from COST action DENORMS CA 15125, supported by COST (European Cooperation in Science and Technology). The work was partly supported by the Spanish Ministry of Economy and Innovation (MINECO) and European Union FEDER through project FIS2015-65998-C2-2 and by project AICO/2016/060 by Conselleria de Educacion, Investigacion, Cultura y Deporte de la Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design of acoustic metamaterials made of Helmholtz resonators for perfect absorption by using the complex frequency plane

  • Romero-García, V.
  • Theocharis, G.
  • Achilleos, V.
  • Merkel, A.
  • Richoux, O.
  • Tournat, V.
  • Groby, J-P
  • Pagneux, V.
  • Jimenez, Noe|||0000-0002-6539-670X
[FR] Dans cette revue, nous présentons des résultats sur l'absorption acoustique parfaite sub-longueur d'onde faisant appel à des métamatériaux acoustiques avec des résonateurs Helmholtz pour différentes configurations. L'absorption parfaite à basse fréquence nécessite une augmentation du nombre d'états aux basses fréquences ainsi que de trouver les bonnes conditions pour une adaptation d'impédance avec le milieu environnant. Si en outre, on souhaite réduire les dimensions géométriques des structures proposées pour des questions pratiques, on peut utiliser des résonateurs locaux judicieusement conçus afin d'attendre une absorption parfaite sub-longueur d'onde. Les résonateurs de Helmholtz se sont révélés de bons candidats en raison de leur accordabilité aisée de la géométrie, donc de la fréquence de résonance, de la fuite d'énergie et des pertes intrinsèques. Lorsqu'ils sont branchés à un guide d'ondes ou à un milieu environnant, ils se comportent comme des systèmes ouverts, avec pertes et résonances caractérisés par leur fuite d'énergie et leurs pertes intrinsèques. L'équilibre entre ces deux aspects représente la condition de couplage critique et donne lieu à un maximum d'absorption d'énergie. Le mécanisme de couplage critique est ici représenté dans le plan de fréquence complexe afin d'interpréter la condition d'adaptation d'impédance. Dans cette revue, nous discutons en détail la possibilité d'obtenir une absorption parfaite par ces conditions de couplage critiques dans différents systèmes tels que la réflexion (à un port), la transmission (à deux ports) ou les systèmes à trois ports., [EN] In this review, we present the results on sub-wavelength perfect acoustic absorption using acoustic metamaterials made of Helmholtz resonators with different setups. Low frequency perfect absorption requires to increase the number of states at low frequencies and finding the good conditions for impedance matching with the background medium. If, in addition, one wishes to reduce the geometric dimensions of the proposed structures for practical issues, one can use properly designed local resonators and achieve subwavelength perfect absorption. Helmholtz resonators have been shown good candidates due to their easy tunability of the geometry, so of the resonance frequency, the energy leakage and the intrinsic losses. When plugged to a waveguide or a surrounding medium they behave as open, lossy and resonant systems characterized by their energy leakage and intrinsic losses. The balance between these two represents the critical coupling condition and gives rise to maximum energy absorption. The critical coupling mechanism is represented here in the complex frequency plane in order to interpret the impedance matching condition. In this review we discuss in detail the possibility to obtain perfect absorption by these critical coupling conditions in different systems such as reflection (one-port), transmission (two-ports) or three-ports systems., The authors gratefully acknowledge the ANR-RGC METARoom (ANR-18-CE08-0021) project and the project HYPERMETA funded under the program Étoiles Montantes of the Région Pays de la Loire. NJ acknowledges financial support from the Spanish Ministry of Science, Innovation and Universities (MICINN) through grant ¿Juan de la Cierva-Incorporación¿ (IJC2018-037897- I). This article is based upon work from COST Action DENORMS CA15125, supported by COST (European Cooperation in Science and Technology).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Zero-phase propagation in realistic plate-type acoustic metamaterials

  • Malléjac, M.
  • Merkel, A.
  • Christensen, J.
  • Tournat, V.
  • Groby, Jean-Philippe
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
  • Romero-García, Vicente|||0000-0002-3798-6454
[EN] We theoretically, numerically, and experimentally analyze the Density-Near-Zero (DNZ) regime of a one-dimensional acoustic metamaterial. This acoustic metamaterial is composed of thin elastic plates periodically clamped in an air-filled waveguide, and the effective dynamic zero mass density is obtained from the strong dispersion around the bandgaps associated with the resonances of the plates. We emphasize the importance of the impedance mismatch between the acoustic metamaterial and the surrounding waveguide at the frequency of the zero effective density in addition to the consequences of the inherent losses. As a result, the frequency of the zero phase propagation, i.e., the acoustic propagation with zero phase delay, is not exactly the frequency of the zero density and lies in the frequency bandgap where the effective density is negative. Considering these limitations, the zero phase propagation is still experimentally observed and a subwavelength acoustic dipole is numerically designed, thus demonstrating the possible realistic implementations of DNZ acoustic metamaterials., This article is based upon work from COST Action DENORMS CA15125, supported by COST (European Cooperation in Science and Technology). This work was funded by the Metaroom Project No. ANR-18-CE08-0021 and co-funded by ANR and RCG. J. Christensen acknowledges the support from the MINECO through a Ramon y Cajal grant (Grant No. RYC-2015-17156). J. Sanchez-Dehesa acknowledges the support from the Ministerio de Economia y Competitividad of the Spanish government and the European Union Fondo Europeo de Desarrollo Regional (FEDER) through Project No. TEC2014-53088-C3-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Interpretation of the Acoustic Black Hole effect based on the concept of critical coupling

  • Leng, J.
  • Pelat, A.
  • Groby, J.P.
  • GAUTIER, FRANÇOIS
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Picó Vila, Rubén|||0000-0003-3537-9658
[EN] An Acoustic Black Hole (ABH) in a one-dimensional (1D) beam is a passive vibration damping device based on a local reduction of the beam thickness attached to a thin layer of attenuating material. This work aims at revisiting the ABH effect by analysing the ABH trapped modes in the complex frequency plane. This analysis relies on an analytical model based on the one-dimensional thin beam theory and the transfer matrix method which assumes that the ABH termination is discretised by constant thickness piecewise elements. The model is validated with numerical simulations by the Finite Element Method. The reflection coefficients of several ABH terminations are studied. The results show that an ABH presents an infinite number of modes associated to an infinite number of poles and zeros of the reflection coefficient, the density and quality factor of which depend on the order of the ABH profile. By considering the ABH termination as an open lossy resonator, its damping efficiency results therefore from a balance between the energy leakage of each mode and its inherent losses, known as the critical coupling condition. In particular, the broadband absorption of the vibration energy is achieved for frequencies higher than that of the mode that is critically coupled. This type of analysis is used to interpret the ABH effect. It provides the losses needed to obtain the critical coupling condition, and is suitable for the optimisation of one-dimensional ABH terminations. (C) 2020 Elsevier Ltd. All rights reserved., This work has been funded by the RFI Le Mans Acoustic (Region Pays de la Loire) within the framework of the Metaplaque project. This article is based on work from COST action DENORMS CA 15125, supported by COST (European Cooperation in Science and Technology). This work was partly supported by the Spanish Ministry of Economy and Innovation (MINECO), by the European Union FEDER through project FIS2015-65998-C2-2, by the project AICO/2016/060 by Conselleria de Educacion, Investigacion, Cultura y Deporte de la Generalitat Valenciana and by the project eTNAA ANR-17-CE08-0035-01 (projet ANR 2017-2010).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optimal absorption of flexural energy in thin plates by critically coupling a locally resonant grating

  • Leng, J.
  • Gautier, F.
  • Pelat, A.
  • Groby, J. -P.
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Picó Vila, Rubén|||0000-0003-3537-9658
[EN] The optimal absorption of flexural energy by the critical coupling of a locally resonant grating embedded in a thin plate is reported in this work for the reflection and transmission problems. The grating is made of a 1D-periodic array of local resonators. A viscoelastic coating is also placed on top of each resonator to control the intrinsic losses of the system. The scattering matrices for the propagative waves of both problems are obtained by means of the Layered Multiple Scattering Theory and validated by the Finite Element Method. In this work, we find that the perfect absorption can be obtained in the reflection problem and the maximal absorption in the transmission problem is limited to 50% by tuning the losses only. These results agree with the theoretical predictions since the eigenvalues reduce to the reflection coefficient in the reflection problem and only one of the two eigenvalues of the scattering matrix is critically coupled in the transmission problem. These results highlight the adaptability of the critical coupling method to optimize the absorption of locally resonant materials for flexural waves in 2D transmission and reflection problems, and pave the way to the design of resonators for efficient flexural wave absorption., This work has been funded by the RFI Le Mans Acoustique (Region Pays de la Loire) within the framework of the MetaplaQ project. This article is based upon work from COST action DENORMS CA 15125, supported by COST (European Cooperation in Science and Technology). This work was partly supported by the project HYPERMETA funded under the program Etoiles Montantes de la Region Pays de la Loire and by the project eTNAA ANR-17-CE08-0035-01 (projet ANR 2017-2021). The authors also acknowledge support from the Spanish Ministry of Economy and Innovation (MINECO) and European Union FEDER through project PID2019-109175GB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental validation of deep-subwavelength diffusion by acoustic metadiffusers

  • Ballestero, Eric
  • Groby, J. P.
  • Dance, Stephen
  • Aygün, H.
  • Jimenez, Noe|||0000-0002-6539-670X
  • Romero-García, Vicente|||0000-0002-3798-6454
[EN] An acoustic metadiffuser is a subwavelength locally resonant surface relying on slow sound propagation. Its design consists of rigidly backed slotted panels, with each slit being loaded by an array of Helmholtz resonators. Due to the slow sound properties, the effective thickness of the panel can therefore be dramatically reduced when compared to traditional diffusers made of quarter-wavelength resonators. The aim of this work is to experimentally validate the concept of metadiffusers from the scattering measurements of a specific metadiffuser design, i.e., a quadratic residue metadiffuser. The experimental results reported herein are in close agreement with analytical and numerical predictions, therefore showing the potential of metadiffusers for controlling sound diffusion at very low frequencies., This article was based upon the work from COST Action DENORMS CA15125, supported by COST (European Cooperation in Science and Technology). This study was financed by London South Bank University, the Royal Opera House, Covent Garden, and the United Kingdom Acoustics Network (UKAN). The authors gratefully acknowledge the ANR-RGC METARoom (No. ANR-18-CE08-0021) project and the project HYPERMETA funded under the program Etoiles Montantes of the R egion Pays de la Loire. N.J. acknowledges the financial support from Generalitat Valenciana through Grant No. APOSTD/2017/042.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Complex Dispersion Relation Recovery from 2D Periodic Resonant Systems of Finite Size

  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Groby, Jean Philippe
[EN] The complex dispersion relations along the main symmetry directions of two-dimensional finite size periodic arrangements of resonant or non-resonant scatterers are recovered by using an extension of the SLaTCoW (Spatial LAplace Transform for COmplex Wavenumber) method. This method relies on the analysis of the spatial Laplace transform instead of the usual spatial Fourier transform of the measured wavefield in the frequency domain. We apply this method to finite dimension square periodic arrangements of both rigid and resonant scatterers embedded in air, i.e., to finite size sonic crystals and finite size acoustic metamaterials, respectively. The main hypothesis considered in this work is the mirror symmetry of the finite structure with respect to its median axis along the analyzed direction. However, we show that the method is robust enough to provide excellent results even if this hypothesis is not fully satisfied. Effectively, a minor asymmetry could be considered as a side effect when the structure is large enough because Laplace transforming the field along the main symmetry directions also implies averaging the field in the perpendicular one. The calculated complex dispersion relations are in excellent agreement with those obtained by an already validated technique, like the Extended Plane Wave Expansion (EPWE). The methodology employed in this work is intended to be directly used for the experimental characterization of real 2D periodic and resonant systems., This article is based on work from COST Action DENORMS CA15125, supported by COST (European Cooperation in Science and Technology).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Perfect Absorption of Sound by Rigidly-Backed High-Porous Materials

  • Jimenez, Noe|||0000-0002-6539-670X
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Groby, J.P.
[EN] We present the conditions to observe perfect sound absorption by rigidly-backed layers of rigid-frame highporous materials. We theoretically analyze different configurations of increasing complexity: a single layer of high-porous material, a layer of high-porous material with an air gap (air plenum), and an optimized multilayer structure. First, we show that to obtain normal incidence perfect sound absorption at the first so-called quarterwavelength resonance of a single rigidly-backed high-porous layer, the thickness of the material is strongly related to its flow resistivity. In particular, perfect sound absorption is observed when the quarter-wavelength resonance is around the characteristic Biot frequency of the high-porous media. We found that the optimal thickness of the layer is 4.64 smaller than the perfectly absorbed wavelength when using one-parameter empirical models for the effective parameters of the high-porous material. Then, we analyze the behavior of the structure for oblique angles of incidence, showing that perfect sound absorption is also produced for other incident angles and frequencies. Second, an air gap is introduced between the high-porous layer and the rigid backing. The gap allows to produce perfect sound absorption for structures thicker than the optimal one and for media with large intrinsic losses, i.e., for materials with high flow resistivity. Finally, optimized multilayer structures are proposed, which present broadband and perfect sound absorption. The existence of perfect absorption is related to the impedance matching, which is produced when the intrinsic losses of the system exactly compensate the leakage of the structure due to its resonance. Thus, to observe perfect sound absorption, in addition to and material properties, the total thickness of any multilayered porous structure is constrained to its quarter-wavelength resonance because of the lack of deep-subwavelength resonance in the system., The authors acknowledge financial support from the Metaudible Project No. ANR-13-BS09-0003, co funded by ANR and FRAE. This article is based upon work from COST Action DENORMS CA 15125, supported by COST (European Cooperation in Science and Technology).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Perfect Absorption in Mirror-Symmetric Acoustic Metascreens

  • Romero-García, V.
  • Groby, J.-P.
  • Merkel, A.
  • Tournat, V.
  • Theocharis, G.
  • Richoux, O.
  • Pagneux, V.
  • Jimenez, Noe|||0000-0002-6539-670X
[EN] Mirror-symmetric acoustic metascreens producing perfect absorption independently of the incidence side are theoretically and experimentally reported in this work. The mirror-symmetric resonant building blocks of the metascreen support symmetric and antisymmetric resonances that can be tuned to be at the same frequency (degenerate resonances). The geometry of the building blocks is optimized to critically couple both the symmetric and the antisymmetric resonances at the same frequency, allowing perfect absorption of sound from both sides of the metascreen. A hybrid analytical model based on the transfer-matrix method and the modal decomposition of the exterior acoustic field is developed to analyze the scattering properties of the metascreen. The resulting geometry is three-dimensionally printed and experimentally tested in an impedance tube. The experimental results agree well with the theoretical predictions, proving the efficiency of these metascreens for the perfect absorption of sound in ventilation problems., We gratefully acknowledge the Agence Nationale de la Recherche (ANR) - Research Grants Council (RGC) METARoom project (Grant No. ANR-18-CE08-0021) and the HYPERMETA project, funded under the program Étoiles Montantes of the Région Pays de la Loire. This paper is based upon work from European Cooperation in Science and Technology (COST) Action DENORMS (Designs for Noise Reducing Materials and Structures) Grant No. CA15125, supported by COST. N.J. acknowledges financial support from the Spanish Ministry of Science, Innovation, and Universities (MICINN) through the grant "Juan de la Cierva-Incorporación" (Grant No. IJC2018-037897-I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Aerogel-based metasurfaces for perfect acoustic energy absorption

  • Fernandez-Marin, Antonio A.
  • Groby, Jean-Philippe
  • Jimenez, Noe|||0000-0002-6539-670X
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
  • Romero-García, Vicente|||0000-0002-3798-6454
[EN] The unusual viscoelastic properties of silica aerogel plates are efficiently used to design subwavelength perfect sound absorbers. We theoretically, numerically and experimentally report a perfect absorbing metamaterial panel made of periodically arranged resonant building blocks consisting of a slit loaded by a clamped aerogel plate backed by a closed cavity. The impedance matching condition is analyzed using the Argand diagram of the reflection coefficient, i.e., the trajectory of the reflection coefficient as a function of frequency in the complex plane. The lack or excess of losses in the system can be identified via this Argrand diagram in order to achieve the impedance matching condition. The universality of this tool can be further exploited to design more complex metasurfaces for perfect sound absorption, thus allowing the rapid design of novel and efficient absorbing metamaterials., This work was funded by the RFI Le Mans Acoustique, Region Pays de la Loire. This article is based upon work from COST Action DENORMS CA15125, supported by COST (European Cooperation in Science and Technology). N.J. acknowledges financial support from Generalitat Valenciana through Grant No. APOSTD/2017/042. J.-P.G and V.R.G. gratefully acknowledge the ANR-RGC METARoom (No. ANR-18-CE08-0021) project and the HYPERMETA project funded under the program Etoiles Montantes of the Region Pays de la Loire. J.S-D. acknowledges the support of the Ministerio de Economia y Competitividad of the Spanish government and the European Union FEDER through Project No. TEC2014-53088-C3-1-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The method of fundamental solutions for the analysis of infinite 3D sonic crystals

  • Godinho, Luis
  • Amado-Mendes, P.
  • Redondo, Javier|||0000-0002-5507-7799
[EN] The use of periodic structures in acoustic applications has interested the scientific community in the last two decades. Although in-depth research has been thoroughly performed, many issues have still not been solved. Computational analysis of sonic structures using realistic 3D models still poses significant problems, and most of the published results correspond to 2D problems. Analysing 3D problems of such structures using conventional methods demands large computational resources, which may be prohibitive. This paper proposes a new approach for such 3D problems making use of a highly efficient Method of Fundamental Solutions (MFS) approach to deal with sonic crystals made of 3D scatterers, infinitely repeated with constant spacing along one direction. The method makes use of a special form of the acoustic fundamental solutions which can be highly efficient in such analysis, while allowing just the cell that is repeated to be effectively modelled. Verification of the model is provided by first comparing its results with those from an ACA-MFS model. Results are compared with those from a FDTD algorithm, and a parametric study is presented revealing the 3D character of the computed responses, and evidencing the formation of acoustic band-gaps at specific frequency bands associated with the Bragg effect., The EU funding support in the scope of COST (European Cooperation in Science and Technology) through the COST ActionPlease check funding information and confirm its correctness. CA15125 - DENORMS: "Designs for Noise Reducing Materials and Structures" is here also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sound absorption and diffusion by 2D arrays of Helmholtz resonators

  • Herrero-Durá, Iván
  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Romero-García, Vicente|||0000-0002-3798-6454
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
[EN] We report a theoretical and experimental study of an array of Helmholtz resonators optimized to achieve both efficient sound absorption and diffusion. The analysis starts with a simplified 1D model where the plane wave approximation is used to design an array of resonators showing perfect absorption for a targeted range of frequencies. The absorption is optimized by tuning the geometry of the resonators, i.e., by tuning the viscothermal losses of each element. Experiments with the 1D array were performed in an impedance tube. The designed system is extended to 2D by periodically replicating the 1D array. The 2D system has been numerically modeled and experimentally tested in an anechoic chamber. It preserves the absorption properties of the 1D system and introduces efficient diffusion at higher frequencies due to the joint effect of resonances and multiple scattering inside the discrete 2D structure. The combined effect of sound absorption at low frequencies and sound diffusion at higher frequencies, may play a relevant role in the design of noise reduction systems for different applications., This research was funded by the European Space Agency under the Networking/Partnering Initiative (NPI) contract number 441-2015. In memoriam to Julián Santiago-Prowald, Senior Advisor for the Structures, Mechanisms and Materials Division of ESA, a great man that always gave us his tireless support. AC acknowledges financial support from Generalitat Valenciana through the grant APOSTD/2018/229. VRG acknowledges the financial support from RFI Le Mans Acoustique (Région Pays de la Loire) in the framework of the project HYPERMETA funded under the program Étoiles Montantes of the Région Pays de la Loire. Authors acknowledge the support of the European Space Agency under contract 441-2015 Co- Sponsored PhD ¿Acoustic Reduction Methods for the Launch Pad¿ and project TRP ESA AO/1-9479/18/NL/LvH ¿Launch Sound Level Reduction¿. This article is based upon work from COST Action DENORMS CA15125, supported by COST (European Cooperation in Science and Technology).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Perfect acoustic absorption in deep sub-wavelength structures for the ventilation problems with degenerate resonators

  • Romero-García, Vicente|||0000-0002-3798-6454
  • Jimenez, Noe|||0000-0002-6539-670X
  • Richoux, Olivier
  • Theocharis, Georgios
  • Groby, Jean-Philippe
  • Pagneux, Vincent
[EN] In this work we report a mechanisms providing symmetric perfect acoustic absorption by sub-wavelength structures in the ventilation problem. While in the problem of reflection the mechanism consists in critically coupling a single resonance independently of its nature, the problem of transmission becomes more complicated and a degenerate resonator with symmetric and antisymmetric resonances should be designed with both resonances critically coupled. The system analyzed in this work is made by a panel with a periodic distribution of slits, the upper wall of which are loaded by Helmholtz Resonators. The propagation in the slit is highly dispersive due to the presence of the resonators, producing a slow sound propagation before the resonance, and down shifting it to low frequencies. By controlling the geometry of the resonator, the visco-thermal losses can be tuned in order to compensate the leakage of the system and fulfill the critical coupling condition so activating the perfect absorption of sound. In the case of transmission, a double slit is needed, one acting as symmetric and the other one as antisymmetric resonators., The authors gratefully acknowledge the ANR-RGC META- Room (ANR-18-CE08-0021) project and the project HYPERMETA funded under the program E?toiles Montantes of the Région Pays de la Loire. This article is based upon work from COST (European Cooperation in Science and Technology) Action DENORMS CA15125, supported by COST (European Cooperation in Science and Technology).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Metadiffusers: Deep-subwavelength sound diffusers

  • Jimenez, Noe|||0000-0002-6539-670X
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Cox, Trevor J.
  • Groby, J.P.
[EN] We present deep-subwavelength diffusing surfaces based on acoustic metamaterials, namely metadiffusers. These sound diffusers are rigidly backed slotted panels, with each slit being loaded by an array of Helmholtz resonators. Strong dispersion is produced in the slits and slow sound conditions are induced. Thus, the effective thickness of the panel is lengthened introducing its quarter wavelength resonance in the deep-subwavelength regime. By tuning the geometry of the metamaterial, the reflection coefficient of the panel can be tailored to obtain either a custom reflection phase, moderate or even perfect absorption. Using these concepts, we present ultra-thin diffusers where the geometry of the metadiffuser has been tuned to obtain surfaces with spatially dependent reflection coefficients having uniform magnitude Fourier transforms. Various designs are presented where, quadratic residue, primitive root and ternary sequence diffusers are mimicked by metadiffusers whose thickness are 1/46 to 1/20 times the design wavelength, i.e., between about a twentieth and a tenth of the thickness of traditional designs. Finally, a broadband metadiffuser panel of 3 cm thick was designed using optimization methods for frequencies ranging from 250 Hz to 2 kHz., This article is based upon work from COST Action DENORMS - CA15125, supported by COST (European Cooperation in Science and Technology). The authors acknowledge financial support from the Metaudible Project No. ANR-13-BS09-0003, cofunded by ANR and FRAE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Sub-Diffractive Acoustic Vortices by Nonlinear Mixing

  • Jimenez, Noe|||0000-0002-6539-670X
  • Ealo, Joao
  • Muelas-Hurtado, Rubén
  • Duclos, Aroune
  • Romero-García, Vicent
[EN] Vortex beams, characterized by a collimated wavefront with a phase dislocation at their principal axis, have found practical applications to construct acoustic tweezers for particle trapping and manipulation, or underwater communications. However, the natural diffraction of the wavefront limits the size of the vortex. This result in vortices whose bright core is larger than the wavelength, limiting their use for practical applications such as long-range underwater communications. In this work, we synthesize a vortex beam of sub-wavelength size at a distance beyond Rayleigh diffraction length using the nonlinear mixing of two confocal, high-frequency and detuned vortex beams of different topological charges. By using the nonlinear mixing of two confocal vortices, it was generated a low-frequency (1 kHz) focused vortex beam of integer topological charge whose distance between magnitude maxima is about 18 times smaller than its wavelength at a distance about 3 times the Rayleigh diffraction length. Sub-wavelength vortices emerge as a result of the spatiotemporal interference of two primary vortex beams due to the conservation of angular momentum during nonlinear wave-mixing. This mechanism opens new paths to design directive parametric antennas for vortex transceivers or particle manipulation systems at scales well below the diffraction limit., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through grant Juan de la Cierva Incorporacion (IJC2018-037897-I) and PID2019-111436RB-C22, and by the Agencia Valenciana de la Innovacio through grants INNVAL10/19/016. This article is based upon work from COST Action DENORMS CA15125. JPG and VRG gratefully acknowledge projects ANR-RGC METARoom (ANR-18-CE08- 0021) and the HYPERMETA funded under the program Etoiles Montantes of the Region Pays de la Loire.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Natural sonic crystal absorber constituted of seagrass (Posidonia Oceanica) fibrous spheres

  • Barguet, L.
  • Romero-García, V.
  • Groby, J.-P.
  • Jimenez, Noe|||0000-0002-6539-670X
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
[EN] We present a 3-dimensional fully natural sonic crystal composed of spherical aggregates of fibers (called Aegagropilae) resulting from the decomposition of Posidonia Oceanica. The fiber network is first acoustically characterized, providing insights on this natural fiber entanglement due to turbulent flow. The Aegagropilae are then arranged on a principal cubic lattice. The band diagram and topology of this structure are analyzed, notably via Argand representation of its scattering elements. This fully natural sonic crystal exhibits excellent sound absorbing properties and thus represents a sustainable alternative that could outperform conventional acoustic materials., This article is based upon work from COST Action DENORMS CA15125, supported by COST(European Cooperation in Science and Technology). The authors gratefully acknowledge the ANR-RGC METARoom (ANR-18-CE08-0021) project, the project HYPERMETA funded under the program Etoiles Montantes of the Region Pays de la Loire, and the project PID2019-109175GB-C22 funded by the Spanish Ministry of Science and Innovation. N.J. acknowledges financial support from the Spanish Ministry of Science, Innovation and Universities (MICINN) through grant "Juan de la Cierva - Incorporacion" (IJC2018-037897-I). The authors would like to thank V. Pagneux and R. Pico Vila for useful discussions and J. Barber and C. Dordoni for their help in collecting the samples.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Spiral sound-diffusing metasurfaces based on holographic vortices

  • Jimenez, Noe|||0000-0002-6539-670X
  • Groby, Jean-Philippe
  • Romero-García, Vicent
[EN] In this work, we show that scattered acoustic vortices generated by metasurfaces with chiral symmetry present broadband unusual properties in the far-field. These metasurfaces are designed to encode the holographic field of an acoustical vortex, resulting in structures with spiral geometry. In the near field, phase dislocations with tuned topological charge emerge when the scattered waves interference destructively along the axis of the spiral metasurface. In the far field, metasurfaces based on holographic vortices inhibit specular reflections because all scattered waves also interfere destructively in the normal direction. In addition, the scattering function in the far field is unusually uniform because the reflected waves diverge spherically from the holographic focal point. In this way, by triggering vorticity, energy can be evenly reflected in all directions except to the normal. As a consequence, the designed metasurface presents a mean correlation-scattering coefficient of 0.99 (0.98 in experiments) and a mean normalized diffusion coefficient of 0.73 (0.76 in experiments) over a 4 octave frequency band. The singular features of the resulting metasurfaces with chiral geometry allow the simultaneous generation of broadband, diffuse and non-specular scattering. These three exceptional features make spiral metasurfaces extraordinary candidates for controlling acoustic scattering and generating diffuse sound reflections in several applications and branches of wave physics as underwater acoustics, biomedical ultrasound, particle manipulation devices or room acoustics., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through Grant "Juan de la Cierva-Incorporacion" (IJC2018-037897-I) and PID2019-111436RB-C22, and by the Agencia Valenciana de la Innovacio through grants INNVAL10/19/016. This article is based upon work from COST Action DENORMS CA15125, supported by COST (European Cooperation in Science and Technology). JPG and VRG gratefully acknowledge the ANR-RGC METARoom (ANR-18-CE08-0021) project and the project HYPERMETA funded under the program Etoiles Montantes of the Region Pays de la Loire.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental evidence of a hiding zone in a density-near-zero acoustic metamaterial

  • Malléjac, M.
  • Merkel, A.
  • Christensen, J.
  • Tournat, V.
  • Groby, J.-P.
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
  • Romero-García, Vicente|||0000-0002-3798-6454
[EN] This paper examines the feasibility of cloaking an obstacle using Plate-type Acoustic Metamaterials (PAMs). We present two distinct strategies to cloak this obstacle, using either the near-zero-density regime of a periodic arrangement of plates or the acoustic doping phenomenon to achieve simultaneous zero-phase propagation and impedance matching. The strong limitations induced by viscothermal and viscoelastic losses that cannot be avoided in such a system are studied. A hiding zone is reported analytically, numerically, and experimentally. In contrast to cloaking, where zero-phase propagation must be accompanied by total transmission and zero reflection, the hiding configuration requires that the scattering properties of the hiding device must not be affected by the presence of the obstacle embedded in it. Contrary to cloaking, the hiding phenomenon is achievable even with a realistic PAM possessing unavoidable losses., This article is based upon the work from COST Action DENORMS (No. CA15125), supported by COST (European Cooperation). The authors would like to thank the support of the ANR-RGC METARoom (No. ANR-18-CE08-0021) project. J. Christensen acknowledges the support from the European Research Council (ERC) through the Starting Grant No. 714577 PHONOMETA and from the MINECO through a Ramon y Cajal Grant (No. RYC-2015-17156).