Skip to main content

-

FJCI-2015-23862

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprogram Subprograma Estatal de Formación
Call Juan de la Cierva Formación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chemical looping with oxygen uncoupling: an advanced biomass combustion technology to avoid CO2 emissions

  • Adánez-Rubio, Iñaki
  • Pérez-Astray, Antón
  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • Diego Poza, Luis F. de
  • Adánez Elorza, Juan
6 Figuras.- 3 Tablas.-"This is a post-peer-review, pre-copyedit version of an article published in Mitigation and Adaptation Strategies for Global Change. The final authenticated version is available online at: http://dx.doi.org/10.1007/s11027-019-9840-5".-Título del post-print: Biomass combustion by Chemical Looping with Oxygen Uncoupling process: experiments with Cu-based and Cu-Mn mixed oxide as oxygen carriers., Bioenergy with carbon dioxide (CO2) capture and storage (BECCS) technologies represent an interesting option to reach negative carbon emissions, which implies the removal of CO2 already emitted to the atmosphere. Chemical looping combustion (CLC) with biomass can be considered as a promising BECCS technology since CLC has low cost and energy penalty. In CLC, the oxygen needed for combustion is supplied by a solid oxygen carrier circulating between the fuel and air reactors. In the fuel reactor, the fuel is oxidized producing a CO2-concentrated stream while the oxygen carrier is reduced. In the air reactor, the oxygen carrier is regenerated with air. Chemical looping with oxygen uncoupling (CLOU) is a CLC technology that allows the combustion of solid fuels as in common combustion with air by means of an oxygen carrier that release gaseous oxygen in the fuel reactor. In the last years, several Cu-based, Mn-based, and mixed oxide oxygen (O2) carriers have been tested showing good CLOU properties. Among them, copper (Cu)-based and Cu-Manganese (Mn) mixed oxides showed high reactivity, O2 release rate, and high O2 equilibrium concentration. The aim of this work is to study the viability of biomass combustion by CLOU process. The combustion of three types of biomass (pine sawdust, olive stone, and almond shell) were studied in a continuous 1.5 kWth CLC unit. Two O2 carriers were tested: a Cu-based oxygen carrier with Magnesium, Aluminum, Oxgen (MgAl2O4) as an inert prepared by spray drying (Cu60MgAl) and a mixed Cu-Mn oxide prepared by spray granulation (Cu34Mn66). These materials are capable of releasing gaseous oxygen when they are reduced in a different range of temperatures. CO2 capture and combustion efficiency were evaluated. Two fuel reactor operation temperatures were used: 775–850 °C for Cu34Mn66 and 900–935 °C for Cu60MgAl. High CO2 capture efficiencies and 100% combustion efficiency were reached with both oxygen carriers and with all the biomasses tested. Therefore, the CLOU technology with the Cu- and Cu-Mn-based oxygen carriers allowed avoiding CO2 emissions maintaining high combustion efficiencies. Results obtained demonstrate that this innovative biomass combustion technology combined with carbon storage lets an efficient BECCS process implementation., I. Adánez-Rubio acknowledges the MINECO and Universidad de Zaragoza (UZ) for the post-doctoral contract awarded (FJCI-2015-23862). A. Pérez-Astray thanks MINECO for the BES-2015-074651 pre-doctoral fellowship co-financed by the European Social Fund.This work was financially supported by the Spanish Ministry of Economy and Competitiveness (MINECO Project: ENE2014-56857-R) and the European Union ERDF funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Soot and char formation in the gasification of pig manure in a drop tube reactor

  • Adánez-Rubio, Iñaki
  • Ferreira, Ricardo
  • Rio, T.
  • Alzueta, M. U.
  • Costa, Mário
8 figures, 1 table. © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0, Biomass gasification offers a significant potential to close the loop of agriculture and many other activities that produce biomass residues. Pig manure, a residue produced in farms, has a huge pollutant potential due to its high production and chemical characteristics. It is necessary to take some control measures to decrease it, being pig manure gasification an interesting option. The present work studies the impact of the gasification temperature and atmosphere on the syngas composition (CO, H2, CH4 and CO2) and formation of soot and char in the gasification of pig manure in a drop tube furnace. The temperature varied between 900 and 1200 °C, and the gasification atmospheres included mixtures of O2/N2, O2/CO2/N2 and O2/H2O/N2. The results revealed that i) the syngas H2/CO ratio and its low heating value increase as the gasification temperature increases regardless of the gasification atmosphere; ii) the addition of H2O to the O2/N2 gasification atmosphere augments significantly the syngas H2/CO ratio, but does not enhance its low heating value, while the addition of CO2 increases slightly the H2/CO ratio, but significantly the heating value, iii) for the present reactor, the optimum operating conditions for the gasification of the pig manure in terms of syngas heating value and yield are a gasification temperature of 1200 °C and a gasification atmosphere composed of a mixture of O2/CO2/N2; and iv) soot yields increase as the temperature increases when gasification occurs in the O2/N2 and O2/CO2/N2 environments, remaining almost constant in the O2/H2O/N2 environment., This work was supported by the Fundação para a Ciência e a Tecnologia, through IDMEC, under LAETA, project UID/EMS/50022/2019. I. Adánez-Rubio acknowledges the MINECO and University of Zaragoza for the post-doctoral contract awarded (FJCI-2015-23862) and the contract, the Ibercaja and CAI (Ibercaja-CAI Europa program) foundations and COST Action CM1404 (European Union) for financial support (Refs. ECOST‐STSM‐CM1404‐42605 and COST‐STSM‐CM1404‐43695)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Chemical looping with oxygen uncoupling: an advanced biomass combustion technology to avoid CO2 emissions

  • Adánez-Rubio, I.
  • Pérez-Astray, A.
  • Abad, A.
  • Gayán, P.
  • De Diego, L.F.
  • Adánez, J.
Bioenergy with carbon dioxide (CO2) capture and storage (BECCS) technologies represent an interesting option to reach negative carbon emissions, which implies the removal of CO2 already emitted to the atmosphere. Chemical looping combustion (CLC) with biomass can be considered as a promising BECCS technology since CLC has low cost and energy penalty. In CLC, the oxygen needed for combustion is supplied by a solid oxygen carrier circulating between the fuel and air reactors. In the fuel reactor, the fuel is oxidized producing a CO2-concentrated stream while the oxygen carrier is reduced. In the air reactor, the oxygen carrier is regenerated with air. Chemical looping with oxygen uncoupling (CLOU) is a CLC technology that allows the combustion of solid fuels as in common combustion with air by means of an oxygen carrier that release gaseous oxygen in the fuel reactor. In the last years, several Cu-based, Mn-based, and mixed oxide oxygen (O2) carriers have been tested showing good CLOU properties. Among them, copper (Cu)-based and Cu-Manganese (Mn) mixed oxides showed high reactivity, O2 release rate, and high O2 equilibrium concentration. The aim of this work is to study the viability of biomass combustion by CLOU process. The combustion of three types of biomass (pine sawdust, olive stone, and almond shell) were studied in a continuous 1.5 kWth CLC unit. Two O2 carriers were tested: a Cu-based oxygen carrier with Magnesium, Aluminum, Oxgen (MgAl2O4) as an inert prepared by spray drying (Cu60MgAl) and a mixed Cu-Mn oxide prepared by spray granulation (Cu34Mn66). These materials are capable of releasing gaseous oxygen when they are reduced in a different range of temperatures. CO2 capture and combustion efficiency were evaluated. Two fuel reactor operation temperatures were used: 775–850 °C for Cu34Mn66 and 900–935 °C for Cu60MgAl. High CO2 capture efficiencies and 100% combustion efficiency were reached with both oxygen carriers and with all the biomasses tested. Therefore, the CLOU technology with the Cu- and Cu-Mn-based oxygen carriers allowed avoiding CO2 emissions maintaining high combustion efficiencies. Results obtained demonstrate that this innovative biomass combustion technology combined with carbon storage lets an efficient BECCS process implementation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Effect of H2S on the S-PAH formation during ethylene pyrolysis

  • Adánez-Rubio, I.
  • Millera, Á.
  • Bilbao, R.
  • Alzueta, M.U.
The effect of the H2S presence on the formation of six different sulphurated polycyclic hydrocarbons (S-PAH), during the pyrolysis of ethylene-H2S mixtures, has been studied in a tubular flow reactor installation. Experiments with different inlet H2S concentrations (0.3, 0.5 and 1%) and temperatures of reaction (between 1075 and 1475 K) have been carried out. The 16 compounds that the Environmental Protection Agency (EPA) has stated as EPA-PAH priority pollutants were also analysed. EPA-PAH compounds were the majority of quantified PAH, and also S-PAH were found and quantified. For temperatures studied, the S-PAH/EPA-PAH ratio values showed a maximum value at 1075 K and a minimum value at 1175 K. With respect to the effect of the inlet concentration of H2S, the S-PAH/EPA-PAH ratio values increased with the increase of the H2S concentration.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Exploratory study of polycyclic aromatic hydrocarbons occurrence and distribution in manure pyrolysis products

  • Adánez-Rubio, I.
  • Fonts, I.
  • Blas, P. de
  • Viteri, F.
  • Gea, G.
  • Alzueta, M.U.
The occurrence and distribution of polycyclic aromatic hydrocarbons (PAH) have been investigated in the products derived from the pyrolysis of pig manure at low temperatures (<550 °C) in a fixed bed reactor. The focus was on the sixteen PAH identified as priority pollutants by the US Environment Protection Agency (EPA). The pyrolysis does not generate a significant additional amount of EPA-PAH to that existing in the original pig manure, under the operational conditions studied (<550 °C). While the total EPA-PAH yield does not indicate a notable dependence on the pyrolysis temperature, the EPA-PAH distribution among the three pig manure pyrolysis products as well as the speciation changed significantly with the temperature. The proportion of heavy PAH species increased as the temperature increased. The initial EPA-PAH in the manure samples plays a significant role in both their concentration and speciation in the biochar. The relationship of the EPA-PAH concentration and speciation in the biochar with those of the raw material was corroborated with a cow manure sample and the biochars obtained from its pyrolysis. For this reason, feedstocks with low EPA-PAH concentrations are recommended in order to obtain biochars with concentrations below the maximum allowed threshold established for their use as a soil enhancer by the International Biochar Initiative (IBI) and in the European Biochar Certificate.