Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A particle swarm optimization algorithm with novelty search for combustion systems with ultra-low emissions and minimum fuel consumption

  • Martínez-Rodríguez, David|||0000-0002-2093-7840
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Bracho Leon, Gabriela|||0000-0002-9198-7044
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
  • Fernandes, Cássio
  • Lucchini, Tommaso
  • Della Torre, Augusto
  • Hidalgo, J. Ignacio
[EN] The particle swarm optimization algorithm is primarily inspired by the natural behaviour of swarms and achieves important results in different applications. However, it is not exempt from stagnation in local optima and has a tendency to prematurely converge to them. Novelty Search is a concept that appeared recently in different fields of computational intelligence. It aims at exploring non-visited areas of the search space through solutions that bring novelty to already discovered solutions. The novelty of this work can be divided into two steps: on one side, this article proposes a variant of the particle swarm optimization algorithm which uses Novelty Search concepts to improve the algorithm¿s performance. Our proposal is first checked and compared using the CEC 2005 benchmark suite and then, we apply it to solve a real-world optimization problem: the design of a combustion system targeting the reduction of pollutant emissions and fuel consumption. The combustion chamber design phase usually is a complex and time-consuming process even with advanced supercomputers, since it depends on several input variables which are highly non-linear and with crossed interaction. Then, the second contribution of this work is to develop a methodology that couples a computational fluid dynamics (CFD) simulation tool with the new optimization algorithm for minimizing the specific fuel consumption of a compression-ignited engine, while constraining the NOx and soot emissions. A 3D-CFD model of the combustion system was built to predict and analyse the performance of the combustion system and hence, select the parameters with a higher impact on the system. The method reduces the computational time and includes tools for the automatic preparation of the input parameters and geometry of the system. The input parameters correspond to geometrical variables that control the bowl shape, the number of holes in the injector, the injection pressure, the swirl number and the exhaust gas recirculation rate. Results show how the simulation tool and the new PSO with Novelty Search algorithm allow us to obtain a new combustion system that minimizes the fuel consumption by 3%, simultaneously reducing NOx and soot emissions., This work has been partially supported by This work has been supported by the grant PID2020-1152 70GB I00 funded by MCIN/AEI/10.13039/501100011033; European Union FEDER funds; Spanish Ministerio de Economía y Competitividad through Grants PID2021-125549OB-I00 and PDC2022-133429-I00. The author C. S. Fernandes thanks the Universitat Politecnica de Valencia for his predoctoral contract (FPI-2019-S2- 20-555), which is included within the framework of Programa de Apoyo para la Investigacion y Desarrollo (PAID).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Combustion Modeling Approach for the Optimization of a Temperature Controlled Reactivity Compression Ignition Engine Fueled with Iso-Octane

  • Pelosin, Mattia
  • Spohr-Fernandes, Cássio
  • Lucchini, Tommaso
  • Marmorini, Luca
  • Zhou, Qiyan
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Bracho Leon, Gabriela|||0000-0002-9198-7044
[EN] In this study, an innovative Low Temperature Combustion (LTC) system named Temperature Controlled Reactivity Compression Ignition (TCRCI) is presented, and a numerical optimization of the hardware and the operating parameters is proposed. The studied combustion system aims to reduce the complexity of the Reaction Controlled Compression Ignition engine (RCCI), replacing the direct injection of high reactivity fuel with a heated injection of low reactivity fuel. The combustion system at the actual state of development is presented, and its characteristics are discussed. Hence, it is clear that the performances are highly limited by the actual diesel-derived hardware, and a dedicated model must be designed to progress in the development of this technology. A Computational Fluid Dynamics (CFD) model suitable for the simulation of this type of combustion is proposed, and it is validated with the available experimental operating conditions. The Particle Swarm Optimization (PSO) algorithm was integrated with the Computational Fluid Dynamic (CFD) software to optimize the engine combustion system by means of computational simulation. The operating condition considered has a relatively high load with a fixed fuel mass and compression ratio. The parameters to optimize are the piston bowl geometry, injection parameters and the boosting pressure. The achieved system configuration is characterized by a wider piston bowl and injection angle, and it is able to increase the net efficiency of 3% and to significantly reduce CO emissions from 0.407 to 0.136 mg., This research has been supported by Grant UPV-SOLGEN-79674 funded by Universitat Politecnica de Valencia. This research has been supported by Grant CIPROM/2021/061 funded by Generalitat Valenciana. The author C. S. Fernandes thanks the Universitat Politècnica de València for his predoctoral contract (FPI-2019-S2-20-555), which is included within the framework of Programa de Apoyo para la Investigación y Desarrollo (PAID).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Analysis and CFD-Guided optimization of advanced combustion systems in compression-ignited engines

  • Spohr Fernandes, Cássio
[ES] Reducir las emisiones de gases contaminantes de los motores de combustión interna alternativos (MCIA) es uno de los mayores retos para combatir el calentamiento global. Dado que los motores seguirán siendo utilizados por la industria durante décadas, es necesario desarrollar nuevas tecnologías. En este contexto, la presente tesis doctoral viene motivada por la necesidad de seguir mejorando los motores, tanto desde el punto de vista de la ingeniería técnica como desde el punto de vista social, debido a los efectos de los gases de efecto invernadero. El objetivo principal de esta tesis es desarrollar una metodología de optimización para sistemas de combustión de motores de encendido por compresión (MEC) mediante el acoplamiento de algoritmos de optimización con simulación por ordenador. Con la optimización de los sistemas de combustión es posible aumentar la eficiencia de los motores, reduciendo así el consumo de combustible junto con la reducción de emisiones contaminantes, en particular óxidos de nitrógeno (NOx) y hollín. En el primer paso, se abordan diferentes algoritmos de optimización con el fin de elegir el mejor candidato para esta metodología. A partir de aquí, la primera optimización se centra en un motor de encendido por compresión que funciona con combustible convencional para validar la metodología y también para evaluar el estado actual de evolución de estos motores. Con el objetivo de reducir el consumo de combustible manteniendo los niveles de NOx y hollín por debajo de los valores de un motor real, se inicia el proceso de optimización. Los resultados obtenidos confirman que un nuevo sistema de combustión específico para este motor podría generar una reducción del consumo de combustible manteniendo las emisiones de gases por debajo del valor estipulado. Además, se concluye que los motores MEC que utilizan combustible convencional se encuentran ya en un nivel de eficiencia muy elevado, y es difícil mejorarlos sin utilizar un sistema de postratamiento. Así pues, el segundo bloque de optimización se basa en el uso de motores MEC que funcionan con un combustible alternativo, que en este caso es el OME. El objetivo de este estudio es diseñar un sistema de combustión específico para un motor que utilice este combustible y que ofrezca un rendimiento del mismo orden de magnitud que un motor diésel. En la búsqueda de una mayor eficiencia, las emisiones de NOx son una restricción del sistema de optimización para que el sistema de combustión no emita más gases que un motor real. En este caso, el hollín no se tiene en cuenta debido a que las características del combustible no producen este tipo de contaminante. Los resultados mostraron que un sistema de combustión diseñado específicamente para esta operación podía ofrecer altas eficiencias, incluso la eficiencia obtenida fue alrededor de 2,2 % mayor en comparación con el motor diesel real. Además, fue posible reducir a la mitad las emisiones de NOx cuando el motor funciona con OME. El último bloque de optimización se refiere a una nueva arquitectura de motor que permite eliminar las emisiones de NOx. El modelo de oxicombustión resulta apasionante, ya que se elimina el nitrógeno de la mezcla de admisión y, por tanto, no se generan emisiones que contengan N2. Además, con el uso de este modo de combustión, es posible capturar CO$_{2}$ de los gases de escape, que luego puede venderse en el mercado. Dado que se trata de un tema nuevo y poco investigado, los resultados son prometedores. Demuestran que fue posible obtener un sistema de combustión específico capaz de ofrecer niveles de eficiencia cercanos a los de los motores convencionales. Además, se eliminaron las emisiones de NOx, así como las de hollín. Adicionalmente, este sistema fue capaz de reducir las emisiones de CO y HC a niveles similares a los motores convencionales. Por otra parte, los resultados presentados en esta tesis doctoral proporcionan una base de datos ampliada para explorar el funcionamiento del motor CI., [CA] Reduir les emissions de gasos contaminants dels motors de combustió interna alternatius (MCIA) és un dels majors reptes per a combatre el camvi climàtic. Atés que els motors continuaran sent utilitzats per la indústria durant dècades, és necessari desenvolupar noves tecnologies. En aquest context, la present tesi doctoral ve motivada per la necessitat de continuar millorant els motors, tant des del punt de vista de l'enginyeria tècnica com des del punt de vista social, degut a l'efecte dels gasos d'efecte d'hivernacle. L'objectiu principal d'aquesta tesi és desenvolupar una metodologia d'optimització per a sistemes de combustió de motors d'encesa provocada mitjançant l'acoblament d'algorismes d'optimització amb simulació per ordinador. Amb l'optimització dels sistemes de combustió és possible augmentar l'eficiència dels motors, reduint així el consum de combustible, concomitantment amb la reducció d'emissions de gasos, en particular òxids de nitrogen (NOx) i sutge. En el primer pas, s'aborden diferents algorismes d'optimització amb la finalitat d'elegir el millor candidat per a aquesta metodologia. A partir d'ací, la primera optimització se centra en un motor d'encesa per compressió que funciona amb combustible convencional per a validar la metodologia i també per a avaluar l'estat actual d'evolució d'aquests motors. Amb l'objectiu de reduir el consum de combustible mantenint els nivells de NOx i sutge per davall dels valors d'un motor real, s'inicia el procés d'optimització. Els resultats obtinguts confirmen que un nou sistema de combustió específic per a aquest motor podria generar una reducció del consum de combustible mantenint les emissions de gasos per davall del valor estipulat. A més, es conclou que els motors d'encesa per compressió que utilitzen combustible convencional es troben ja en un nivell d'eficiència molt elevat, i és difícil millorar-los sense utilitzar un sistema de posttractament. Així doncs, el segon bloc d'optimització es basa en l'ús de motors d'encesa per compressió que funcionen amb un combustible alternatiu, que en aquest cas és el OME. L'objectiu d'aquest estudi és dissenyar un sistema de combustió específic per a un motor que utilitze aquest combustible i que oferisca un rendiment del mateix ordre de magnitud que un motor dièsel. En la cerca d'una major eficiència, les emissions de NOx són una restricció del sistema d'optimització perquè el sistema de combustió no emeta més gasos que un motor real. En aquest cas, el sutge no es té en compte pel fet que les característiques del combustible no produeixen aquest tipus de contaminant. Els resultats van mostrar que un sistema de combustió dissenyat específicament per a aquesta operació podia oferir altes eficiències, fins i tot l'eficiència obtinguda va ser al voltant de 2,2 % major en comparació amb el motor dièsel real. A més, va ser possible reduir a la meitat les emissions de NOx quan el motor funciona amb OME. L'últim bloc d'optimització es refereix a una nova arquitectura del motor que permet eliminar les emissions de NOx. El model de oxicombustió resulta apassionant, ja que s'elimina el nitrogen de la mescla d'admissió i, per tant, no es generen emissions que continguen N2. A més, amb l'ús d'aquesta manera de combustió, és possible capturar CO$_{2}$ dels gasos de fuita, que després pot vendre's en el mercat. Atés que es tracta d'un tema nou i poc investigat, els resultats són prometedors. Demostren que va ser possible obtindre un sistema de combustió específic capaç d'oferir nivells d'eficiència pròxims als dels motors convencionals. A més, es van eliminar les emissions de NOx, així com les de sutge. Addicionalment, aquest sistema va ser capaç de reduir les emissions de CO i HC a nivells similars als motors convencionals. D'altra banda, els resultats presentats en aquesta tesi doctoral proporcionen una base de dades ampliada per a explorar el funcionament del motor CI., [EN] Reducing emissions of pollutant gases from internal combustion engines (ICE) is one of the biggest challenges to combat global warming. As the engines will continue to be used by industry for decades, it is necessary to develop new technologies. In this context, the present doctoral thesis was motivated by the need to further improve engines, both from a technical engineering and social point of view, due to the effects of greenhouse gases. The main objective of this thesis is to develop an optimization methodology for compression ignition (CI) engine combustion systems by coupling optimization algorithms with computer simulation. With the optimization of the combustion systems, it is possible to increase the efficiency of the engines, thus reducing fuel consumption, concomitantly with the reduction of gas emissions, in particular nitrogen oxides (NOx) and soot. In the first step, different optimization algorithms are addressed in order to elect the best candidate for this methodology. From this point on, the first optimization is focused on a CI engine operating with conventional fuel in order to validate the methodology and also to evaluate the current state of evolution of these engines. With the goal of reducing fuel consumption while keeping NOx and soot levels below the values of a real engine, the optimization process begins. The results obtained confirm that a new combustion system specifically for this engine could generate a reduction in fuel consumption while keeping gas emissions below the stipulated value. Furthermore, it is concluded that CI engines using conventional fuel are already at a very high-efficiency level, and it is difficult to improve them without the use of an after-treatment system. Thus, the second optimization block is based on the use of CI engines operating on an alternative fuel, which in this case is OME. This study aimed to design a specific combustion system for an engine using this fuel that delivers efficiency on the same order of magnitude as a diesel engine. While searching for better efficiency, the NOx emissions are a restriction of the optimization system so that the combustion system does not emit more gases than a real engine. In this case, soot is not considered due to the characteristics of the fuel not producing this kind of pollutant. The results showed that a combustion system designed specifically for this operation could deliver high efficiencies, including the efficiency obtained was around 2.2 \% higher compared to the real diesel engine. In addition, it was possible to halve the NOx emissions when the engine operates with OME. The last optimization block concerns a new engine architecture that makes it possible to eliminate NOx emissions. The oxy-fuel combustion model is exciting since nitrogen is eliminated from the intake mixture, and thus no emissions containing N2 are generated. Furthermore, with the use of this combustion mode, it is possible to capture CO$_{2}$ from the exhaust gas, which can then be sold to the market. Since this is a new and little-researched topic, the results are promising. They show that it was possible to obtain a specific combustion system capable of delivering efficiency levels close to conventional engines. Furthermore, NOx emissions were eliminated, as well as soot emissions. Additionally, this system was able to reduce CO and HC emissions to levels similar to conventional engines. Moreover, the results presented in this doctoral thesis provide an extended database to explore the CI engine operation. Additionally, this work showed the potential of computational simulation allied with mathematical methods in order to design combustion systems for different applications., I want to thanks the Universitat Politecnica de Valencia for his predoctoral contract (FPI-2019-S2-20-555), which is included within the framework of Programa de Apoyo para la Investigacion y Desarrollo (PAID).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Combustion system optimization for the integration of e-fuels (Oxymethylene Ether) in compression ignition engines

  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Bracho Leon, Gabriela|||0000-0002-9198-7044
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Spohr-Fernandes, Cássio
  • Lucchini, Tommaso
[EN] In this study, a numerical methodology for the optimization of the combustion chamber in compression ignited engines using OME as fuel is presented. The objective is to obtain a dedicated combustion system for an engine that is fueled with this alternative fuel improving the efficiency and reducing the emissions of NOx. This article proposes the integration between the optimization algorithm and CFD codes to evaluate the behavior of an engine fuelled with the low sooting fuel OME. Based on a diesel model validated against experimental data, a further model for OME fuel was implemented for evaluating the performance of the engine. The particle swarm algorithm (PSO) was modified based on the Novelty Search concepts and used as optimization algorithm. Several tools are coupled in order to create each CFD case where all the tools and optimization algorithm are coupled in a routine that automates the entire process. The result is an optimized combustion system that provides an increase of the efficiency (about 2.2%) and a NOx reduction (35.7%) in comparison with the baseline engine with conventional fuel. In addition, a neuronal network was trained with all the results of all simulations performed during the optimization process, studying the influence of each parameter on the emissions and efficiency. From this analysis it was concluded that the EGR rate and injection pressure affects the NOx emissions with a range of variability of 63% and 38% respectively., The work has been partially supported by the Spanish Ministerio de Economia, Industria y Competitividad through Grant No TRA2017-89139-C2-1-R "Desarrollo de modelos de combustion y emisiones HPC para el analisis de sistemas de transporte sostenibles" The author C. S. Fernandes thanks the Universitat Politecnica de Valencia for his predoctoral contract (FPI-2019-S2-20-555) , which is included within the framework of Programa de Apoyo para la Investigacion y Desarrollo (PAID)