Skip to main content

DESARROLLO DE MODELOS DE COMBUSTION Y EMISIONES HPC PARA EL ANALISIS DE PLANTAS PROPULSIVAS DE TRANSPORTE SOSTENIBLES

TRA2017-89139-C2-1-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 24
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A numerical study of the effect of nozzle diameter on diesel combustion ignition and flame stabilization

  • Desantes J.M.|||0000-0002-4124-9393
  • García-Oliver, José M|||0000-0002-2676-9681
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Pachano-Prieto, Leonardo Manuel
[EN] The role of nozzle diameter on diesel combustion is studied by performing computational fluid dynamics calculations of Spray A and Spray D from the Engine Combustion Network. These are well-characterized single-hole sprays in a quiescent environment chamber with thermodynamic conditions representative of modern diesel engines. First, the inert spray evolution is described with the inclusion of the concept of mixing trajectories and local residence time into the analysis. Such concepts enable the quantification of the mixing rate, showing that it decreases with the increase in nozzle diameter. In a second step, the reacting spray evolution is studied focusing on the local heat release rate distribution during the auto-ignition sequence and the quasi-steady state. The capability of a well-mixed-based and a flamelet-based combustion model to predict diesel combustion is also assessed. On one hand, results show that turbulence-chemistry interaction has a profound effect on the description of the reacting spray evolution. On the other hand, the mixing rate, characterized in terms of the local residence time, drives the main changes introduced by the increase of the nozzle diameter when comparing Spray A and Spray D., The author(s) disclosed receipt of the following financial support for the research, authorship and/or publication of this article: The work was partially funded by the Government of Spain through the CHEST Project (TRA2017-89139-C2-1-R) and by Universitat Politecnica de Valencia through the Programa de Ayudas de Investigaciony Desarrollo (PAID-01-16).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Thermal effects on the diesel injector performance through adiabatic 1D modelling. Part II: Model validation, results of the simulations and discussion

  • Payri, Raul|||0000-0001-7428-5510
  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Carreres, Marcos|||0000-0001-6430-6613
  • Belmar-Gil, Mario
[EN] In this paper, a one-dimensional computational model of the flow in a common-rail injector is used to compute local variations of fuel temperature (including the temperature change produced upon expansion across the nozzle) and analyse their effect on injector dynamics. These variations are accounted through the adiabatic flow hypothesis, assessed in a first part of the paper where the model features are also described. They imply variations in the fuel properties and the flow regime established across the injector internal restrictions driving the solenoid valve. An extensive validation of the model against experimental results is presented for a wide range of conditions. Multiple injection strategies are also explored, analysing the influence of the inlet fuel temperature and its variations on the mass injected by successive injections and the critical dwell time below which they cannot be separated. Results show significant changes in fuel temperature across some injector restrictions. These changes are greater the higher the rail pressure and lower the fuel temperature at the injector inlet. In the case of the flow across nozzle orifices, the fuel can be either heated or subcooled depending on the operating conditions, the heating being especially relevant for cold-start-like fuel temperatures at the inlet. Thermal effects also influence the injection rate and duration. This influence on injector dynamics is particularly accused in the injector of study due to its ballistic nature. In this regard, the time needed to effectively separate two successive injections is greater the higher the fuel temperature and the injection pressure., This work was partly sponsored by FEDER and the Spanish "Ministerio de Economia y Competitividad" in the frame of the project "Desarrollo de modelos de combustion y emisiones HPC para el analisis de plantas propulsivas de transporte sostenible (CHEST)", reference TRA2017-89139-C2-1-R-AR. On the other hand, the support given to Mr Mario Belmar by "Universitat Politecnica de Valencia" through the "FPI-Subprograma 2" grant within the "Programa de Apoyo para la Investigacion y Desarrollo (PAID-01-18)" is gratefully acknowledged by the authors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Exploring the passive the pre-chamber ignition concept for spark-ignition engines fueled with natural gas under EGR-diluted conditions

  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Barbery-Avila, Ibrahim Ignacio
  • Martinez-Hernandiz, P.J.
[EN] The pre-chamber ignition system has demonstrated to be a suitable technology for increasing burning rates while reducing the cycle-to-cycle variability in spark-ignition engines. This concept offers an improvement in thermal efficiency through an increase in ignition energy and flame surface, allowing it to overcome knocking combustion issues at high engine load/speeds. This fact makes this ignition concept well compatible with the use of dilution strategies to control emissions or to further improve efficiency. However, despite promoting faster combustion, knocking combustion is still a major limitation at low rotational speeds and high engine loads (low-end torque). In this investigation, the performance of the passive pre-chamber concept is evaluated in a single-cylinder turbocharged spark-ignition engine fueled with compressed natural gas in EGR-diluted conditions. Several experiments and numerical simulations are combined to analyze the basis of the pre-chamber operation, while seeking to improve the global performance of the engine. To this end, a new pre-chamber geometry is proposed that is able to achieve better features in the ejected jets, to enhance the performance of the concept in the whole engine map., The work has been partially supported by the Spanish Ministerio de Economia y Competitividad, Spain through grant number TRA2017-89139-C2-1-R. The authors also wish to thank Mr. Gabriel Alcantarilla for his inestimable assistance during the experimental campaign.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improving the performance of the passive pre-chamber ignition concept for spark-ignition engines fueled with natural gas

  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Martínez-Hernándiz, Pablo José
  • Libert, C.
  • Rampanarivo, F.
[EN] Passive pre-chamber ignition concept has been proven to be an excellent strategy to increase the ignition energy and enhance the combustion velocity even when spark-ignition engines are operating in diluted conditions. Other benefits of this system are the increased combustion stability and combustion efficiency, reducing hydrocarbons and carbon monoxide emissions. However, these advantages are limited at some operation conditions such as low engine load or diluted conditions since both the energy available in the pre-chamber and the scavenge of combustion products are compromised. In this framework, numerical studies using two different computational tools, based on one-dimensional modeling, are utilized to gain knowledge about the governing parameters and to improve the design of a pre-chamber when the engine operates at these restrictive conditions. In particular, the impact of the pre-chamber volume, the total cross sectional area of the holes and tangential angle of the nozzles have been numerically evaluated. Different pre-chamber designs were proposed and experimentally tested in a single-cylinder, high compression ratio turbocharged spark-ignition engine fueled with compressed natural gas and operating on Miller cycle. Results give valuable insight into the key aspects of the internal geometry and some relevant design paths to follow for a suitable pre-chamber definition., The work has been partially supported by the Spanish Ministerio de Economia y Competitividad through Grant No. TRA2017-89139-C2-1-R. P.J. Martinez-Hernandiz is partially supported by an FPI contract (FPI-S2-19-21993) of the "Programa de Apoyo para la Investigacion y Desarrollo (PAID-05-19)" of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Computational study on the influence of nozzle eccentricity in spray formation by means of Eulerian Sigma-Y coupled simulations in diesel injection nozzles

  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • De La Morena, Joaquín|||0000-0003-0208-508X
  • Martínez-Miracle-Muñoz, Enrique Carlos
[EN] The present work analyses the effect of the eccentricity of diesel nozzle orifices over the spray behaviour by means of CFD simulations. Several orifice geometries with varying horizontal eccentricity (from 0.50 to 0.94) are selected. Their performance is assessed at a high injection pressure of 200 MPa, a 3 MPa back-pressure and non-evaporative conditions. The nozzle flow characteristics, including cavitation modelled by a Homogeneous Relaxation Model (HRM), are accounted for in the spray performance by means of a Sigma - Y model. The code is validated via two reference nozzles, the so called "Spray A" of the Engine Combustion Network plus a second nozzle from a production injector, and then extended to the eccentric geometries. The results and discussions include spray angle and penetration, air entrainment and flow parameters of the nozzle inner conditions versus the eccentricity value., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was supported by the Ministerio de Ciencia, Innovacion y Universidades of the Spanish Government. The PhD studies by Enrique C. Martinez-Miracle have been funded by Agencia Estatal de Investigacion of the Spanish Government and the ESF (European Social Fund), project "Desarrollo de modelos de combustion y emisiones HPC para el analisis de plantas propulsivas de transporte sostenibles"(TRA2017-89139-C2-1-R) bymeans of the "Subprograma Estatal de Formacion del Programa Estatal de Promocion del Talento y su Empleabilidad en I+D+i".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of local extinction of a n-heptane spray flame using large-eddy simulation with tabulated chemistry

  • Benajes, Jesús|||0000-0002-1653-9188
  • García-Oliver, José M|||0000-0002-2676-9681
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • Olmeda-Ramiro, Iván
  • Both, A.
  • Mira, D.
[EN] This work is focused on the study of flame stabilization and local extinction of a spray flame in an atmospheric non-swirled test rig referred to as the CORIA Rouen Spray Burner. This burner shows a double reaction front structure, with an outer laminar diffusion flame and an inner wrinkled partially-premixed flame undertaking local extinction. This unsteady phenomenon is investigated here using large-eddy simulations with a tabulated chemistry method based on steady and unsteady diffusion flamelets with heat loss. A validation of the numerical simulations is conducted first for the carrier and dispersed phase and good agreement with the experimental data is found for mean and fluctuating quantities. The present results were able to predict relevant parameters of the flame like the lift-off length and flame shape. Numerical results evidence some intermittency on the OH concentration with the presence of high values of formaldehyde indicating the existence of localized extinction in the leading edge of the flame. A detailed analysis showed the impact of droplets on the reacting layer and the existence of rich pockets quenching the flame front. Further downstream, it was shown that when the scalar dissipation rate reaches high values near the reaction zone, the flame front becomes thinner and wrinkled until it eventually quenches. The numerical results evidence that the applied tabulated chemistry method is capable of capturing the local extinction and re-ignition events occurring in the inner layer., This work was partially funded by the Spanish Ministerio de Economia y Competitividad within the frame of the CHEST (TRA2017-89139-C2-1-R) project. BSC also acknowledges the funding from the CoEC project through the European Unions Horizon 2020 research and innovation programme under grant agreement No 952181. Authors acknowledge the computer resources at Marenostrum and the technical support provided by Barcelona Supercomputing Center (BSC) (IM-2019-3-0 025, IM-2020-1-0 017, IM-2020-2-0 026) . Authors also thank the access to the CRSB database kindly provided by Prof. B. Renou.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Understanding the diesel-like spray characteristics applying a flamelet-based combustion model and detailed large eddy simulations

  • Pérez-Sánchez, Eduardo J.
  • García-Oliver, José M|||0000-0002-2676-9681
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
[EN] This investigation analyses the structure of spray A from engine combustion network (ECN), which is representative of diesel-like sprays, by means of large eddy simulations and an unsteady flamelet progress variable combustion model. A very good agreement between modelled and experimental measurements is obtained for the inert spray that supports further analysis. A parametric variation in oxygen concentration is carried out in order to describe the structure of the flame and how it is modified when mixture reactivity is changed. The most relevant trends for the flame metrics, ignition delay and lift-off length are well-captured by the simulations corroborating the suitability of the model for this type of configuration. Results show that the morphology of the flame is strongly affected by the boundary conditions in terms of the reactive scalar spatial fields and Z-T maps. The filtered instantaneous fields provided by the simulations allow investigation of the structure of the flame at the lift-off length, whose positioning shows low fluctuations, and how it is affected by turbulence. It is evidenced that small ignition kernels appear upstream and detached from the flame that eventually merge with its base in agreement with experimental observations, leading to state that auto-ignition plays a key role as one of the flame stabilization mechanisms of the flame., The author(s) disclosed receipt of the following financial support for the research, authorship and/or publication of this article: The authors acknowledge that this work was possible thanks to the Ayuda para la Formacion de Profesorado Universitario (FPU 14/03278) funded by the Subprogramas de Formacion y de Movilidad del Ministerio de Educacion, Cultura y Deporte from Spain. Also, this study was partially funded by the Ministerio de Economia y Competitividad from Spain in the frame of the CHEST (TRA2017-89139-C2-1-R) national project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluation of the passive pre-chamber ignition concept for future high compression ratio turbocharged spark-ignition engines

  • Benajes, Jesús|||0000-0002-1653-9188
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Martínez-Hernándiz, Pablo José
  • Libert, C.
  • Dabiri, M.
[EN] The pre-chamber ignition concept is an attractive strategy to enable the operation of spark-ignition engines in lean or diluted conditions keeping a suitable combustion process. According to the results the benefits in lean conditions include the combustion process shortening, the improvement of combustion stability and the increase of combustion efficiency by lowering carbon monoxide and hydrocarbons emissions. Thus, the pre-chamber ignition concept, especially in its passive version, arises as a promising alternative for future spark-ignition engines for passenger car applications. In this framework, an experimental investigation has been carried out to evaluate the potential of passive pre-chamber ignition concept in a high compression ratio, turbocharged, port fueled spark-ignition engine, using 95 Research Octane Number gasoline. As a first step, a 1D Wave Action Model was generated to design the pre-chamber geometry taking the fuel available at the start of pre-chamber combustion and the pressure difference between the main chamber and pre-chamber as key parameters. In a second step, these pre-chamber designs were experimentally validated at high load/speed conditions (4500¿rpm, 12.5¿bar Indicated Mean Effective Pressure) and compared with the conventional spark-ignition concept. Experimental results show how the passive pre-chamber concept increases efficiency with good combustion stability and high combustion efficiency in stoichiometric conditions. Nevertheless, maximum lambda attainable with the passive system is similar than that of the conventional spark and much lower compared to the maximum levels reported for the active system., The work has been partially supported by the Spanish Ministerio de Economia y Competitividad through Grant No. TRA2017-89139-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Performance of elliptical nozzles on the spray dynamics of convergent and constant section nozzles by means of a Sigma-Y coupled model

  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Martínez-Miracle-Muñoz, Enrique Carlos
[EN] In this paper, a computational study on the differences between a convergent and a constant section elliptical nozzle is performed. Coupled internal-external flow simulations were carried out by means of a sigma -Y model experimentally validated. The differences reported in terms of internal flow and spray parameters present the cavitation as an important effect in the elliptical nozzle geometries. The conclusions suggest a mixture improvement potential for the cavitating elliptical nozzles., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was supported by the Ministerio de Ciencia, Innovacion y Universidades of the Spanish Government. The PhD studies by Enrique C. Martinez-Miracle have been funded by the Agencia Estatal de Investigacion of the Spanish Government and the ESF (European Social Fund), project "Desarrollo de modelos de combustion y emisiones HPC para el analisis de plantas propulsivas de transporte sostenibles" (TRA2017-89139-C2-1-R) by means of the "Subprograma Estatal de Formacion del Programa Estatal de Promocion del Talento y su Empleabilidad en I + D + i".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Thermal effects on the diesel injector performance through adiabatic 1D modelling. Part I: Model description and assessment of the adiabatic flow hypothesis

  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Gimeno, Jaime|||0000-0003-3317-9994
  • Martín, Jaime|||0000-0002-0496-3176
  • Carreres, Marcos|||0000-0001-6430-6613
[EN] The fuel flow along common-rail injectors is usually treated as isothermal, although the expansions across the injector orifices lead to variations in the fuel temperature that in turn modify the fuel properties influencing injector dynamics. This investigation introduces the hypothesis of adiabatic flow to account for local temperature variations in the computational model of a solenoid injector previously introduced by the authors in its isothermal variant. The main contribution of the study consists on the assessment of the validity of this hypothesis by qualitatively estimating the relative importance of the heat transfer processes during the injection event and in the time lapse among injections. Results of this tentative assessment for engine-like conditions imply that heat transfer is usually still occurring by the time of a new injection, meaning any initial temperature difference among the fuel and the injector wall is not expected to be completely mitigated before each injection event. The magnitude of reduction of this temperature difference depends on the injection frequency through engine speed and load. Anyway, the assumption of adiabatic flow seems to hold once the steady conditions of the injection are reached, meaning that any temperature change predictions considered with the adiabatic hypothesis may be valid as long as a certain temperature change is accounted for at the injector inlet. In a second part of the paper, the capabilities of this new model are validated against experimental data, allowing the use of the model to explore the influence of the thermal effects on the injection event., This work was partly sponsored by FEDER and the Spanish "Ministerio de Economia y Competitividad" in the frame of the project "Desarrollo de modelos de combustion y emisiones HPC para el analisis de plantas propulsivas de transporte sostenible (CHEST)", reference TRA2017-89139-C2-1-R-AR. The support of General Motors Global Research and Development (US) concerning the experimental measurements in the engine is gratefully acknowledged by the authors. The authors would also like to thank Jose Enrique del Rey, Leo Thiercelin and Mariano Sanchez for their technical help.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Computational assessment towards understanding the energy conversion and combustion process of lean mixtures in passive pre-chamber ignited engines

  • Benajes, Jesús|||0000-0002-1653-9188
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Barbery-Avila, Ibrahim Ignacio
  • Libert, C.
  • Rampanarivo, F.
  • Dabiri, M.
[EN] In this paper, a computational study was performed using a combination of several numerical tools to better understand the limiting aspects of combustion in a passive pre-chamber ignition system when operating at lean conditions. A specific methodology was developed to analyze in detail the scavenging and combustion processes of this ignition concept. Results show how the scavenging of passive pre-chambers is primarily dependent on the force that the piston makes on the gas during the compression stroke, being independent of the pre-chamber geometry as along as the ratio between the total cross sectional area of the pre-chamber holes and the prechamber volume is kept within a suitable range. Moreover, a successful lean combustion, with an air-to-fuel ratio around 2, cannot be achieved as the burning rates inside the pre-chamber significantly decrease due to the low laminar flame speeds, that results in low quality jets. Further results show that increasing the flow temperature can help to recover competitive combustion rates when knocking combustion is not a limiting factor. The contribution of the heat losses through the pre-chamber walls to the overall energy balance of the pre-chamber has been estimated, showing that their impact is negligible (< 5%). Alternatives for increasing the laminar flame speed were proposed in order to improve combustion inside the pre-chamber. Although the pre-chamber combustion profile was successfully improved, none of the proposed solutions were able to completely burn the main chamber charge with the current pre-chamber design., The work has been partially supported by the Spanish Ministerio de Economia y Competitividad through Grant No. TRA2017-89139-C2-1-R. J. Gomez-Soriano is partially supported through the Programa de Apoyo para la Investigacion y Desarrollo (PAID) of Universitat Politecnica de Valencia [Grant No. FPI-S2-2018-17367].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Numerical analysis of the passive pre-chamber ignition concept for light duty applications

  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Barbery-Avila, Ibrahim Ignacio
  • Cédric Libert
[EN] The use of advanced ignition concepts and enhanced combustion strategies is being widely studied for modern engine applications. In this framework, the passive pre-chamber ignition system is gaining popularity for its mechanical simplicity. However, in order to implement this ignition system in passenger car vehicles, the concept must be able to operate in the whole engine map. Numerous experimental investigations in the literature have found that the concept operates suitably at high load/speed conditions but has several problems operating at low engine load/speeds. However, not many investigation conducted to date have focused on comparing and understanding the underlying physics of this ignition strategy in different engine load/speed conditions. Therefore, in this investigation, a numerical study is carried out using a state of the art 3D-CFD model, to analyze the performance of the passive pre-chamber ignition system in three relevant operating conditions of the engine map. A novel methodology is developed to analyze the fundamentals of the passive pre-chamber concept in terms of internal flow field characteristics, combustion and energy conversion. The model is validated with experiments performed previously by the authors. In particular, the low load/speed operating point, representative of idle conditions, was deeply analyzed to asses the issues reported in the literature. Results have shown that the inherent deterioration of the flow field properties inside the pre chamber as the engine load/speed decreases, compromises the operation at low load/speed conditions. The energy conversion in the pre-chamber is also worsened when operating at lower load/speeds, hindering the generation of suitable jets for igniting the main chamber charge. Moreover, the position of the pre-chamber in the cylinder head has a significant impact on the energy distribution in the main chamber. The results also revealed that a higher amount of non-reacting/cold flow is ejected from the pre-chamber as the spark is pushed from MBT conditions towards the top dead center (TDC), and the gap between the triggering of the spark and the onset of main chamber combustion increases. The findings of this article have allowed to close the knowledge gap between the physical characteristics of the passive pre-chamber concept and the experimental trends found in other researches on this topic., The authors want to express their gratitude to CONVERGENT SCIENCE Inc. and Convergent Science GmbH for their kind support for the 0D, 1D and CFD calculations with the CONVERGE software. The work has been partially supported by the Spanish Ministerio de Economía y Competitividad through grant number TRA2017-89139- C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A two-equation soot-in-flamelet modeling approach applied under Spray A conditions

  • Pachano, Leonardo
  • Xu, Chao
  • Kundu, Prithwish
  • García-Oliver, José M|||0000-0002-2676-9681
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
[EN] Soot production (including formation and oxidation) is studied in the transient, high-pressure and turbulent n -dodecane Spray A flames from the Engine Combustion Network (ECN) using computational fluid dynamics (CFD) simulations. A two-equation soot-in-flamelet modeling approach is applied within the framework of the Unsteady Flamelet Progress Variable (UFPV) model and results are validated against experimental data. Equations for soot mass fraction and soot number density derived in the mixture fraction space are solved in the context of detailed flamelet calculations. Source terms for the different steps in the soot chemistry are tabulated and incorporated in the flamelet manifold. For the reference condition, the modeling approach based on the tabulated flamelet manifold reduces the computational cost of a CFD calculation by approximately 40 times compared to a non-tabulated well-mixed (WM) modeling approach. The soot-in-flamelet approach is then extended to study the effect of ambient oxygen concentration, ambient mixture composition and ambient temperature on soot production. Results show that the modeling approach is able to capture the experimental trends for the soot volume fraction (SVF) with good quantitative agreement, especially in the soot ramp-up region., This work was partially funded by the Government of Spain through the CHEST Project (TRA2017-89139-C2-1-R) and by Universitat Politecnica de Valencia through Programa de Ayudas de Investigacion y Desarrollo (PAID-01-16) and Ayudas para movilidad dentro del Programa para la Formacion de Personal investigador 2017. We gratefully acknowledge the computing resources provided on Bebop, a computing cluster operated by the Laboratory Computing Resource Center at Argonne National Laboratory. The technical support of Convergent Science is also greatly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Estudio sobre el impacto de la geometría de toberas diesel en el desarrollo del chorro, la formación de la mezcla y la combustión

  • Martínez-Miracle Muñoz, Enrique Carlos
[ES] El empuje actual de las normativas de emisiones y una conciencia social cada vez más crítica en este aspecto, ha llevado a la industria automotriz a elevar sus estándares en eficiencia a cimas nunca antes vistas. Con el mayor peso de las nuevas normativas puesto sobre los vehículos Diesel, la presión ejercida sobre esta tecnología es, si cabe, aún más crítica. Dada la necesidad de mantener este tipo de plantas propulsivas en determinadas aplicaciones, como son el transporte terrestre pesado, maquinaria o en el transporte marítimo, es también necesario mantener su desarrollo. Como parte fundamental de los motores Diesel, el sistema de inyección interviene directamente en la generación de la energía. La mejora y optimización de su funcionamiento repercute sobre la cadena de eficiencias del sistema. Esta tesis pretende contribuir al desarrollo de las plantas propulsivas Diesel en este aspecto y, concretamente, en el estudio de las geometrías de toberas Diesel de inyección directa. A lo largo del texto, este tipo de geometrías son estudiadas tanto desde la perspectiva del flujo interno como del flujo externo. Los estudios combinan modelos numéricos Eulerianos (para flujo interno o interno-externo acoplado), modelos Lagrangianos discretos (para el estudio del chorro), junto con medidas experimentales diversas que avalan los análisis ejecutados. La exploración de las geometrías propuestas no queda acotada solamente a formas circulares, más convencionales, sino que también se ha extendido a toberas de morfologías más innovadoras como son las elípticas. Las metodologías presentadas demuestran ser eficaces en el estudio de estos sistemas y una herramienta a tener en cuenta en la mejora de su diseño. Los distintos resultados obtenidos defienden, además, como la geometría de la tobera es un condicionante del desarrollo posterior de la mezcla y puede ser utilizada como elemento de optimización de la misma., [CA] L'actual impuls de les normatives d'emissions i una consciència social cada vegada més crítica en aquest aspecte ha portat a la indústria automobilística a elevar els seus estàndards d'eficiència a cotes mai vistes abans. Amb el major pes de les noves normatives imposades als vehicles dièsel, la pressió exercida sobre aquesta tecnologia és, si cap, encara més crítica. Donada la necessitat de mantenir aquest tipus de plantes propulsives en determinades aplicacions, com el transport terrestre pesat, maquinària o el transport marítim, és també necessari mantenir el seu desenvolupament. Com a part fonamental dels motors dièsel, el sistema d'injecció intervé directament en la generació d'energia. La millora i optimització del seu funcionament repercuteix en la cadena d'eficiències del sistema. Aquesta tesi pretén contribuir al desenvolupament de les plantes propulsives dièsel en aquest aspecte i, concretament, en l'estudi de les geometries de bussons dièsel d'injecció directa. Al llarg del text, aquest tipus de geometries són estudiades tant des de la perspectiva del flux intern com del flux extern. Els estudis combinen models numèrics Eulerians (per a flux intern o intern-extern acoblat), models Lagrangians discrets (per a l'estudi del corrent), juntament amb mesures experimentals diverses que avalen els anàlisis realitzats. L'exploració de les geometries proposades no queda acotada només a formes circulars, més convencionals, sinó que també s'ha estès a bussons de morfologies més innovadores com les el·líptiques. Les metodologies presentades demostren ser eficaces en l'estudi d'aquests sistemes i una eina a tenir en compte en la millora del seu disseny. Els diferents resultats obtinguts també argumenten que la geometria del busó és un condicionant del desenvolupament posterior de la barreja i pot ser utilitzada com a element d'optimització de la mateixa., [EN] The current push for emissions regulations and an increasingly critical social awareness in this regard has led the automotive industry to raise its efficiency standards to unprecedented heights. With greater emphasis on new regulations placed on Diesel vehicles, the pressure on this technology is even more critical. Given the need to maintain such propulsion systems in specific applications like heavy land transport, machinery, or maritime transportation, it is also necessary to continue their development. As a fundamental part of Diesel engines, the injection system directly affects energy generation. Improving and optimizing its operation has an impact on the overall efficiency of the system. This thesis aims to contribute to the development of Diesel propulsion systems in this regard, specifically in the study of direct injection Diesel nozzle geometries. Throughout the text, these types of geometries are examined from both internal and external flow perspectives. The studies combine Eulerian numerical models (for internal or coupled internal-external flow), discrete Lagrangian models (for jet analysis), along with various experimental measurements that support the conducted analyses. The exploration of proposed geometries is not limited to conventional circular shapes but has also extended to more innovative morphologies such as elliptical nozzles. The presented methodologies prove to be effective in studying these systems and serve as a valuable tool in improving their design. The different results obtained also argue that nozzle geometry is a determining factor in the subsequent mixture development and can be used as an optimization element for it., Las investigaciones de esta tesis han sido respaldadas por el Ministerio de Ciencia, Innovación y Universidades el Gobierno de España y mis estudios de doctorado han sido financiados por la Agencia Estatal de Investigación del gobierno de España y el Fondo Social Europeo. Dichas ayudas se concretaron dentro del marco del proyecto "Desarrollo de modelos de combustión y emisiones HPC para el análisis de plantas propulsivas de transporte sostenibles" (TRA2017-89139-C2-1-R) a través del "Subprograma Estatal de Formación del Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Advantages of hydrogen addition in a passive pre-chamber ignited SI engine for passenger car applications

  • Benajes, Jesús|||0000-0002-1653-9188
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Barbery-Avila, Ibrahim Ignacio
  • Libert, C.
[EN] Hydrogen is one of the most promising alternative fuels for the transportation industry. The use of hydrogen to enable lean burn in internal combustion engines is an attractive solution for reducing CO2 emissions from two points of views: the substitution of carbon-based fuels and the increased thermal efficiency due to lean operation. Combining this strategy with the passive pre-chamber ignition system with gasoline/hydrogen blends is even more interesting. The main limitations of the passive pre-chamber concept in a high compression ratio spark-ignition engine were shown through engine experiments. A numerical study was then performed to evaluate the chance of extending the dilution limit by using hydrogen along with this technology. Results show how the use of hydrogen provides considerable benefits in the main chamber combustion process by enhancing the thermo-chemical properties of the mixture, increasing the flame speed, and improving the flame structure. Using an adequate gasoline-hydrogen blend proved to enable optimum burning rates at lean conditions, leading to a relevant thermal efficiency gain., Ministerio de Economia, Industria y Competitividad, Gobierno de Espana, Grant/Award Number: TRA2017-89139-C2-1-R; Universitat Politecnica de Valencia, Grant/Award Number: FPI-S1-2019-0033
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Computational study of ECN Spray A and Spray D combustion at different ambient temperature conditions

  • García-Oliver, José M|||0000-0002-2676-9681
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • Pachano-Prieto, Leonardo Manuel
[EN] The combustion process of the Engine Combustion Network (ECN) Spray A and Spray D is studied over a wide range of ambient temperatures from 750 K to 900 K. With nominal diameters of 89.4 ¿m for the Spray A and 190.3 ¿m for the Spray D, these n-dodecane sprays are representative for light- and heavy-duty compression ignition engine applications, respectively. Computational Fluid Dynamics calculations are carried out using a Lagrangian parcel Eulerian fluid approach in a Reynolds averaged Navier¿Stokes framework. For the Spray D reference condition, two sub-grid flame structure assumptions and the effect of turbulence chemistry interaction (TCI) on autoignition and flame structure at quasi-steady state are assessed in the context of a well-mixed and an Unsteady Flamelet Progress Variable (UFPV) combustion model. After that, UFPV approach is used to evaluate combustion behavior for the different ambient temperature conditions. Reference condition results show that both well-mixed and flamelet assumptions lead to a similar autoignition sequence. In terms of ignition delay time, TCI plays an important role, within the UFPV model, in reproducing the experimental trend observed for the increase in nozzle diameter. In terms of lift-off length, the well-mixed model is observed to predict a longer value compared to the flamelet-based sub-grid assumption. Lastly, the analysis of the autoignition sequence and flame structure at quasi-steady state is also extended over the whole range of ambient temperature conditions., This work was partially funded by the Government of Spain through the CHEST Project (TRA2017-89139-C2-1-R). CONVERGENT SCIENCE Inc support is greatly acknowledged. The authors also want to express their gratitude to Dr. Bertrand Naud from CIEMAT for the development of the flamelet solver used in this work
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Soot temperature characterization of spray a flames by combined extinction and radiation methodology

  • Xuan, Tiemin
  • Desantes J.M.|||0000-0002-4124-9393
  • Pastor, José V.|||0000-0003-4113-4681
  • García-Oliver, José M|||0000-0002-2676-9681
[EN] Even though different optical techniques have been applied on 'Spray A' in-flame soot quantification within Engine Combustion Network in recent years, little information can be found for soot temperature measurement. In this study, a combined extinction and radiation methodology has been developed with different wavelengths and applied on quasi-steady Diesel flame to obtain the soot amount and temperature distribution simultaneously by considering self-absorption issues. All the measurements were conducted in a constant pressure combustion chamber. The fuel as well as the operating conditions and the injector used were chosen following the guidelines of the Engine Combustion Network. Uncertainty caused by wavelength selection was evaluated. Additionally, temperature-equivalence ratio maps were constructed by combining the measurements with a 1D spray model. Temperature fields during the quasi-steady combustion phase show peak temperatures around the limit of the radiation field, in agreement with a typical diffusion flame structure. Effects of different operating parameters on soot formation and temperature were investigated. Soot temperature increases dramatically with oxygen concentration, but it shows much less sensitivity with ambient temperature and injection pressure, which on the other hand have significant effects on soot production. (C) 2019 The Combustion Institute. Published by Elsevier Inc. All rights reserved., This study was partially funded by the Ministerio de Economia y Competitividad from Spain in the frame of the CHEST Project (TRA2017-89139-C2-1-R) and China Postdoctoral Science Foundation (2018M642176). This study was also partially supported by State Key Laboratory of Engines, Tianjin University.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

CFD modeling of combustion and soot production in Diesel sprays

  • Pachano Prieto, Leonardo Manuel
[ES] En los últimos años, las emisiones de hollín provenientes de los motores de combustión interna han recibido más atención debido al impacto negativo que éstas tienen no solo en el ambiente, sino también en la salud del ser humano. Como respuesta, leyes cada vez más estrictas han sido aplicadas impulsando así a la comunidad científica al desarrollo de motores más eficientes en el uso del combustible y por supuesto más limpios en términos de emisiones contaminantes. En este contexto, el modelado computacional ha sido la herramienta utilizada en numerosos esfuerzos que buscan contribuir a mejorar el entendimiento que se tiene sobre los altamente complejos fenómenos que componen el proceso de producción de hollín. El principal objetivo de esta tesis es simular la producción de hollín en chorros Diesel en condiciones de operación típicas de un motor de combustión interna utilizando CFD. La consecución del objetivo de la tesis comprende una evaluación preliminar de la configuración de los distintos modelos para el caso de chorros inertes. En segundo lugar, el estudio detallado de la hipótesis utilizada para caracterizar la estructura de la llama a nivel sub-grid (tomando como base los conceptos well-mixed o flamelet) y del enfoque para tener en cuenta la interacción entre turbulencia y química. Por último, se presentan resultados del modelado de la combustión y producción de hollín para diferentes condiciones de contorno de reactividad y mezcla del chorro utilizando un modelo de hollín de dos ecuaciones. En resumen, el lector encontrará a lo largo de este documento un estudio exhaustivo sobre la combustión y producción de hollín en chorros inyectados con toberas mono-orificio en ambientes quiescentes. De este tipo de chorros, el Spray A y Spray D de la Engine Combustion Network son utilizados como casos de referencia., [CA] En els últims anys, les emissions de sutge provinents dels motors de combustió interna han rebut més atenció a causa de l'impacte negatiu que aquestes tenen no sols en l'ambient, sinó també en la salut de l'ésser humà. Com a resposta, lleis cada vegada més estrictes han sigut aplicades impulsant així a la comunitat científica al desenvolupament de motors més eficients en l'ús del combustible i per descomptat més nets en termes d'emissions contaminants. En aquest context, el modelatge computacional ha sigut l'eina utilitzada en nombrosos esforços que busquen contribuir a millorar l'enteniment que es té sobre els altament complexos fenòmens que componen el procés de producció de sutge. El principal objectiu d'aquesta tesi és simular la producció de sutge en rolls dièsel en condicions d'operació típiques d'un motor de combustió interna utilitzant CFD. La consecució de l'objectiu de la tesi comprèn una avaluació preliminar de la configuració dels diferents models per al cas de rolls inerts. En segon lloc, l'estudi detallat de la hipòtesi utilitzada per a caracteritzar l'estructura de la flama a nivell sub-grid (prenent com a base els conceptes well-mixed o flamelet) i de l'enfocament per a tindre en compte la interacció entre turbulència i química. Finalment, es presenten resultats del modelatge de la combustió i producció de sutge per a diferents condicions de contorn de reactivitat i mescla del doll utilitzant un model de sutge de dues equacions. En resum, el lector trobarà al llarg d'aquest document un estudi exhaustiu sobre la combustió i producció de sutge en dolls injectats amb toveres mono-orifici en ambients immòbils. D'aquesta mena de dolls, l'Spray A i Spray D de la Engine Combustion Network són utilitzats com a casos de referència., [EN] Over the past few years, soot emissions from internal combustion engines have gained attention due to its impact on the environment and human health. In response, ever-stricter legislation has been enforced driving the research community toward more fuel-efficient and cleaner engines. Within this context, soot modeling has been the subject of many efforts seeking to contribute to the understanding of the highly complex phenomena that composes the soot production process. This thesis main objective aims at simulating soot production in Diesel sprays under engine-like conditions using computational fluid dynamics (CFD). The fulfillment of the thesis main objective entails a preliminary assessment of the inert spray computational setup for validation purposes. Then, a detailed study on the sub-grid flame structure and handling of turbulence-chemistry interaction is reported focusing on well-mixed and flamelet assumptions. Lastly, the study of reactivity and mixing boundary condition variations on combustion and soot production are assessed with a two-equation soot model. In summary, throughout this document the reader will find a comprehensive study of combustion and soot modeling in single-hole nozzle sprays in quiescent environments from which the Spray A and Spray D target conditions from the Engine Combustion Network are the main reference cases., The respondent wishes to acknowledge the financial support received through Programa de Ayudas de Investigación y Desarrollo (PAID-01-16) and Ayudas para movilidad dentro del Programa para la Formación de Personal investigador 2017 of Universitat Politècnica de València and the Government of Spain through the CHEST Project (TRA2017-89139-C2-1-R). The respondent also wants to express his gratitude to Convergent Science for their kind support in the use of CONVERGE software for performing the CFD simulations. Parts of the work presented in this thesis have been supported in a collaborative framework with research partners at Argonne National Laboratory and their support is greatly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Transient nozzle flow analysis and near-field characterization of gasoline direct fuel injectors under different surrogate fuel and flash boiling conditions

  • Martínez, Maria
  • Martí-Aldaravi, Pedro
  • Martínez-Miracle, Enrique Carlos
  • Salvador, Francisco Javier|||0000-0003-3269-2251
[EN] This article focuses on understanding the transient effects of the gasoline direct injection (GDi) process, which plays an important role in mixture formation and combustion efficiency in this type of engine. Owing to the growing interest of the scientific community in better understanding the performance of engines with other alternative fuels, this work includes not only iso-octane as a substitute fuel for gasoline but also surrogate fuels such as hexane, pentane, heptane, ethanol, and multiple components. In GDi injections, the injector plays a major role in defining the air-fuel mixture quality. The study of these phenomena has become challenging because of the reduced size of the orifices, high flow velocities, and multiphasic flows. Computational fluid dynamics (CFD) tools allow insight and understanding into complex flow physics, which are considered in this research. Unsteady Reynolds-Averaged Navier Stokes (URANS) is selected to account for the turbulent effects. The volume-of-fluid (VOF) approach is employed to analyze the flow inside the nozzle and the first 2-5 mm of the spray. A homogeneous relaxation model (HRM) accounts for the mass exchange between flow phases. Validation against experimental data proves how the variation in discharge pressure minimally influences the macroscopic parameters of internal flow. The density and volatility of different fuels directly affect injection. This effect must be considered, especially in flash boiling conditions, where fuels with a greater tendency toward phase change produce strong flash boiling, resulting in a higher probability of spray collapse and lower engine performance., This research was funded by Agencia Estatal de Investigación of the Spanish Government, project Modelado de combustible sostenible de aviación para bajas emisiones. Atomización. (TED2021-131618A-C22). Additionally, the authors would like to thank the Fundación del Centro de Supercomputación de Castilla y León (FCSCL) and ACT now HPC Cloud Cluster for allowing the use of their clusters to perform part of the simulations carried out in this work. The Ph.D. studies by Enrique C. Martínez-Miracle have been funded by the Agencia Estatal de Investigación of the Spanish Government and the ESF (European Social Fund), project Desarrollo de modelos de combustión y emisiones HPC para el análisis de plantas propulsivas de transporte sostenibles (TRA2017-89139-C2-1-R) by means of the Subprograma Estatal de Formación del Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i . Finally, this work was carried out while Dr. María Martínez was on a grant with reference ACIF/2018/118 financed by the Government of Generalitat Valenciana and financial support from the European Union
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis de maestría (MasterThesis)

Computational study on OMEx-type fuels under ECN Spray A conditions, Estudio computacional sobre combustibles tipo OMEx en condiciones ECN Spray A

  • de Leon Ceriani, Daiana
[ES] Dado el creciente aumento en el consumo enérgico y los cada vez más restrictivos objetivos de reducción de gases de efecto invernadero, es necesario, entre otras medidas medioambientales, disminuir el consumo de la principal fuente energética hasta el momento a nivel mundial, los combustibles fósiles. El sector del transporte en particular se encuentra inmerso en una transición imparable hacia la movilidad eléctrica, lo cual es muy prometedor, pero de todos modos las necesidades de autonomía del vehículo dificultan la electrificación en las aplicaciones de mayor potencia. Por este motivo, el uso de plantas propulsivas basadas en motores de combustión a corto-mediano plazo seguirá siendo necesario en este sector. Esto significa que los combustibles fósiles deberán ser reemplazados, independientemente de la electrificación, por otras alternativas también sostenibles, en forma principalmente de combustibles sintéticos y renovables. Este cambio será razonable si, entre otros aspectos, sus emisiones contaminantes permiten cumplir las legislaciones al respecto. En este sentido, son prometedores los combustibles sin enlaces carbono-carbono, ya que producen una cantidad muy pequeña de hollín, la cual se reduce a medida que aumenta el contenido de oxígeno en el combustible. Ello permite mejorar el balance entre emisiones de hollín y de óxidos de nitrógeno (NOx) en motores de encendido por compresión. El presente trabajo se centra en una primera aproximación al modelado CFD de dos combustibles que cumplen estas condiciones y pertenecen a la familia de los denominados los poli-oximetilen dimetil éteres (OMEx), caracterizados justamente por la ausencia de enlaces carbono-carbono en sus moléculas y al mismo tiempo ser combustibles oxigenados. Además, tienen propiedades físicas y químicas compatibles para su utilización en los sistemas de propulsión convencionales. Estos combustibles son el foco de una importante actividad en el sector del transporte en la transición a una descarbonización del mismo. Se ha seleccionado un combustible mono-componente de esta familia, en concreto el de cadena más corta (OME1) y una mezcla de componentes de diferente longitud de cadena (OMEx). La comprensión del proceso de combustión de estos combustibles sintéticos y renovables es fundamental para mejorar los sistemas de combustión actuales. El estudio se ha llevado a cabo en condiciones de funcionamiento de un motor de encendido por compresión, con el fin de evaluar los cambios en la estructura de la llama al introducir estos nuevos combustibles. El entorno experimental y de modelado se ha realizado en condiciones definidas por la Engine Combustion Network (ECN), en particular con el Spray A, siendo este el inyector de menor tamaño. Los cálculos CFD se han realizado en el entorno de CFD CONVERGE. Se han utilizando dos modelos de combustión diferentes, por un lado uno basado en la resolución de la cinética química detallada y el otro basado en la teoría de `flamelets¿. Este último ha sido desarrollado dentro de CMT y se trabajó en su adaptación para el correcto modelado de los nuevos combustibles en estudio. En cuanto a la turbulencia, se ha utilizado el planteamiento del promediado de Reynolds para las ecuaciones de Navier¿Stokes (RANS) en todos los casos, conjuntamente con un enfoque lagrangiano-euleriano para el tratamiento multifásico. El análisis de resultados pone especial atención en la evaluación de las diferencias entre modelos de combustión, en la capacidad predictiva del modelo frente a resultados experimentales, así como en la estructura de llama obtenida para estos combustibles frente a otros más convencionales analizados hasta el momento., [EN] Due to the steady increase in energy consumption and the increasingly restrictive objectives to reduce greenhouse gases, it is necessary, among other environmental measures, to reduce the consumption of the main energy source so far worldwide, the fossil fuels. The transport sector in particular is immersed in an unstoppable transition towards electric mobility, which is very promising, but in any case, the vehicle needs for autonomy make electrification difficult in higher power applications. For this reason, the use of propulsion plants based on combustion engines in the short-medium term will continue to be necessary in this sector. This means that fossil fuels will have to be replaced, regardless of electrification, by other sustainable alternatives, mainly in the form of synthetic and renewable fuels. This change will be reasonable if, among other aspects, its polluting emissions allow it to comply with the legislation in this regard. In this sense, fuels without carbon-carbon bonds are promising as they produce a very small amount of soot, which decreases with the increase in oxygen content in the fuel. This makes it possible to improve the trade-off between emissions of soot and nitrogen oxides (NOx) in compression-ignition engines. This work focuses on a first approximation to CFD modeling of two fuels that meet these conditions and belong to the family of the so-called poly-OxyMethylene dimethyl Ethers (OMEx), characterized by the absence of carbon-carbon bonds in their molecules and at the same time being oxygenated fuels. Furthermore, they have compatible physical and chemical properties for use in conventional propulsion systems. These fuels are the focus of an important activity in the transport sector in the transition towards decarbonisation. A single-component fuel from this family has been selected, specifically the shortest chain one (OME1) as well as a blend of components of different chain length (OMEx). Understanding the combustion process for these synthetic and renewable fuels is fundamental to improve current combustion systems. The study has been carried out in operating conditions of a compression ignition engine, in order to evaluate the changes in the flame structure when introducing these new fuels. The experimental and modeling environment has been carried out under conditions defined by the Engine Combustion Network (ECN), in particular with Spray A, this being the smallest injector. CFD calculations have been carried out within the CFD CONVERGE environment. Two different combustion models have been used, on the one hand one based on the resolution of detailed chemical kinetics and the other hand another one based on the theory of `flamelets¿. The latter has been developed within CMT and work has been done on its adaptation for the correct modeling of the new fuels under study. Regarding turbulence, the Reynolds Averaged Navier-Stokes (RANS) approach has been used in all cases, together with a Lagrangian-Eulerian approach for multiphase treatment. The analysis of results pays special attention to the evaluation of the differences between combustion models, to the predictive capacity of the model compared to experimental results, as well as to the flame structure obtained for these fuels compared to other more conventional ones analyzed so far., This work was partially funded by the Government of Spain through the CHEST Project (TRA2017-89139-C2-1-R). CONVERGENT SCIENCE Inc support is greatly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

LES Eulerian diffuse-interface modeling of fuel dense sprays near- and far-field

  • Desantes J.M.|||0000-0002-4124-9393
  • García-Oliver, José M|||0000-0002-2676-9681
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • Olmeda-Ramiro, Iván
  • Pandal, A.
  • Naud, B.
[EN] Engine fuel spray modeling still remains a challenge, especially in the dense near-nozzle region. This region is difficult to experimentally access and also to model due to the complex and rapid liquid and gas interaction. Modeling approaches based on Lagrangian particle tracking have failed in this area, while Eulerian modeling has proven to be particularly useful. Interface resolved methods are still limited to primary atomization academic configurations due to excessive computational requirements. To overcome those limitations, the single-fluid diffuse interface model known as Sigma-Y, arises as a single-framework for spray simulations. Under the assumption of scale separation at high Reynolds and Weber numbers, liquid dispersion is modeled as turbulent mixing of a variable density flow. The concept of surface area density is used for representing liquid structures, regardless of the complexity of the interface. In this work, a LES based implementation of the Sigma-Y model in the OpenFOAM CFD library is applied to simulate the ECN Spray A configuration. Model assessment is performed for both near- and far-field spray development regions using different experimental diagnostics available from ECN database. The CFD model is able to capture near-nozzle fuel mass distribution and, after Sigma equation constant calibration, interfacial surface area. Accurate predictions of spray far-field evolution in terms of liquid and vapor tip penetration and local velocity can be simultaneously achieved. Model accuracy is lower when compared to mixture fraction axial evolution, despite radial distribution profiles are well captured., This work was partially funded by the Spanish Ministerio de Economia y Competitividad within the frame of the CHEST (TRA2017-89139-C2-1-R) project. The computations were partially performed on the Tirant III cluster of the Servei d'Informatica of the University of Valencia (vlc38-FI-2018-2-0006). Authors acknowledge the computer resources at Picasso and the technical support provided by Universidad de Malaga (UMA) (RES-FI-2018-1-0039).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Combustion system optimization for the integration of e-fuels (Oxymethylene Ether) in compression ignition engines

  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Bracho Leon, Gabriela|||0000-0002-9198-7044
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Spohr-Fernandes, Cássio
  • Lucchini, Tommaso
[EN] In this study, a numerical methodology for the optimization of the combustion chamber in compression ignited engines using OME as fuel is presented. The objective is to obtain a dedicated combustion system for an engine that is fueled with this alternative fuel improving the efficiency and reducing the emissions of NOx. This article proposes the integration between the optimization algorithm and CFD codes to evaluate the behavior of an engine fuelled with the low sooting fuel OME. Based on a diesel model validated against experimental data, a further model for OME fuel was implemented for evaluating the performance of the engine. The particle swarm algorithm (PSO) was modified based on the Novelty Search concepts and used as optimization algorithm. Several tools are coupled in order to create each CFD case where all the tools and optimization algorithm are coupled in a routine that automates the entire process. The result is an optimized combustion system that provides an increase of the efficiency (about 2.2%) and a NOx reduction (35.7%) in comparison with the baseline engine with conventional fuel. In addition, a neuronal network was trained with all the results of all simulations performed during the optimization process, studying the influence of each parameter on the emissions and efficiency. From this analysis it was concluded that the EGR rate and injection pressure affects the NOx emissions with a range of variability of 63% and 38% respectively., The work has been partially supported by the Spanish Ministerio de Economia, Industria y Competitividad through Grant No TRA2017-89139-C2-1-R "Desarrollo de modelos de combustion y emisiones HPC para el analisis de sistemas de transporte sostenibles" The author C. S. Fernandes thanks the Universitat Politecnica de Valencia for his predoctoral contract (FPI-2019-S2-20-555) , which is included within the framework of Programa de Apoyo para la Investigacion y Desarrollo (PAID)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of the n-dodecane chemical mechanism on the CFD modelling of the diesel-like ECN Spray A flame structure at different ambient conditions

  • Payri, F.|||0000-0002-3314-4911
  • García-Oliver, José M|||0000-0002-2676-9681
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Pérez-Sánchez, Eduardo Javier
[EN] Encouraged by the diversity of n-dodecane chemical mechanisms currently available, this investigation focuses on analysing the impact of using different fuel oxidation schemes on the diesel-like Engine Combustion Network (ECN) Spray A flame structure, simulated by means of an Unsteady Flamelet Progress Variable (UFPV) combustion model. The present research discusses systematically the characteristics of four n-dodecane chemical mechanisms in perfectly stirred reactors and counterflow laminar diffusion flames (flamelets) before the final evaluation in turbulent reacting sprays in order to describe the effects of adding different physical levels of complexity to the ignition of the mixtures. In addition, this analysis is complemented with the description of the effect of the boundary conditions on the flame structure. Results evidence the extreme importance of the low temperature chemistry including the period for which the cool flame extends. The different prediction of this stage between mechanisms leads to noticeable different laminar flame structures which in turn produce substantially distinct turbulent flames, especially in the vicinity of the lift-off length (LOL) in terms of reactivity and positioning in the Z-T map. Finally, simulations confirm the strong effect of the boundary conditions, especially for the ambient temperature, on the ignitable mixtures which directly impacts on the soot precursors formation. (C) 2019 The Combustion Institute. Published by Elsevier Inc. All rights reserved., Authors acknowledge that this work was possible thanks to the Ayuda para la Formacion de Profesorado Universitario (FPU 14/03278) belonging to the Subprogramas de Formacion y de Movilidad from the Ministerio de Educacion, Cultura y Deporte from Spain. This work was partially funded by the Government of Spain through CHEST Project (TRA2017-89139-C2-1-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Advantages of the unscavenged pre-chamber ignition system in turbocharged natural gas engines for automotive applications

  • López, J. Javier|||0000-0002-9486-2511
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Martínez-Hernándiz, Pablo José
  • Rampanarivo, F.
  • Libert, C.
  • Dabiri, M.
[EN] In view of the increasing restrictions for CO2 mitigation, the evaluation of alternative fuels to ensure sustainability of transportation is becoming increasingly important. Since some of these alternatives can be refined from renewable sources, they are interesting from the perspective of both: the use of the current power-plants and the CO2 emission. In this sense, natural gas arises as an interesting propellant to substitute fossil fuels. Therefore, combining this fuel with specific combustion strategies can help to decrease the environmental footprint of transportation in the broadest sense. In this paper, an evaluation of the possible advantages of this combination has been conducted. The investigation has been carried out in a port fueled turbocharged spark-ignition engine, using compressed natural gas (CNG) and a passive pre-chamber ignition system. The effects of the CNG fuel properties on combustion have been analyzed and the global impact of using CNG for transportation has been appraised by means of the life cycle assessment. Results show that combustion of CNG refined by different renewable sources not only reduces the global CO2 emission but also can contribute to remove the existent pollution. In addition, they show an increase of the engine thermal efficiency when combining CNG and the pre-chamber ignition concept., The work has been partially supported by the Spanish Ministerio de Economia y Competitividad through grant number TRA2017-89139-C2-1-R. P. J. Martinez-Hernandiz is partially supported by an FPI, Spain contract (FPI-S2-19-21993) of the "Programa de Apoyo para la Investigacion y Desarrollo (PAID-05-19)" of the Universitat Politecnica de Valencia.