Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Nanosecond, picosecond and femtosecond laser surface treatment of magnesium alloy: role of pulse length

  • Pou Alvarez, Pablo
  • Riveiro Rodríguez, Antonio
  • Nóvoa Rodríguez, Xosé Ramón
  • Fernández Arias, Mónica
  • Del Val Garcia, Jesús
  • Comesaña Piñeiro, Rafael
  • Boutinguiza Larosi, Mohamed
  • Lusquiños Rodríguez, Fernando
  • Pou Saracho, Juan María
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Despite having a whole range of applications as in weight-saving structures, biodegradable implants and rechargeable batteries, the usage of magnesium is still hindered by its high tendency to corrosion. Pulsed laser treatments are an interesting approach to modify the surface of magnesium aiming the improvement of the corrosion properties as well as the generation a controlled roughness, which is useful for improving coatings adhesion or tailoring the interactions with living cells at the surface of an implant. In this work, a novel study on the role of the pulse length on topography and corrosion properties of AZ31 magnesium alloy laser-treated surfaces is presented. Three different laser sources with pulse lengths of 20 ns, 800 ps and 266 fs were employed with a similar experimental setup. Surface topography analysis revealed a reduction of the amount of melt generated and an increase in the aspect ratio (depth/width) of the ablated features as the pulse length is reduced. All three treatments significantly improved the corrosion performance of the untreated base material. Thicker and more homogenously distributed recast material for the longer pulses of the nanosecond treatment resulted in a longer-lasting protection (11–12 fold reduction in mass loss rate vs base material) compared to the pico- and femtosecond treatments (4–5 fold reduction), Ministerio de Ciencia e Innovación | Ref. PID2020-117900RB-I00, Ministerio de Ciencia, Innovación y Universidades | Ref. EQC2018-004315-P, Xunta de Galicia | Ref. ED431C 2019/23, Ministerio de Universidades | Ref. FPU16/05492
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Laser texturing of stainless steel under different processing atmospheres: from superhydrophilic to superhydrophobic surfaces

  • Pou Álvarez, Pablo
  • Del Val Garcia, Jesús
  • Riveiro Rodríguez, Antonio
  • Comesaña Piñeiro, Rafael
  • Arias González, Felipe
  • Lusquiños Rodríguez, Fernando
  • Boutinguiza Larosi, Mohamed
  • Quintero Martínez, Félix
  • Pou Saracho, Juan María
Wettability plays a major role in a variety of surface related phenomena, as corrosion, heat transfer or tissue adhesion on implants. Consequently, great research effort is being devoted to control the wetting degree of functional surfaces. Pulsed laser texturing at micro/nanometric level has been widely used for that purpose as a precision/time efficient technique. This work studies the role of the processing atmosphere in controlling the wettability of commercial AISI 304 by laser texturing. A pulsed laser source (λ = 532 nm) working at the nanosecond regime was employed and five different atmospheres were tested (i.e. O 2 , Air, CO 2 , N 2 , Ar). The results show clear differences in the wetting behaviour depending solely on the processing environment, ranging from hydrophilicity (31°) to hydrophobicity (125°). Those differences in wettability were found to be a consequence of changes in surface chemistry between samples processed under the various gases. The laser processing parameters showed a capability to tune the final wetting behaviour by controlling the topography and modulating the chemical composition given by the processing environment. It is demonstrated how the effects of the atmosphere can be exploited to tailor the wettability of the untreated surfaces (θ = 88°) up to the desired value, ranging from superhydrophilicity (θ = 0°) to superhydrophobicity (θ = 152°)., Xunta de Galicia | Ref. D431B 2016/042, Xunta de Galicia | Ref. ED481D 2017/010, Xunta de Galicia | Ref. ED481B 2016/047-0, Ministerio de Economía y Competitividad | Ref. MAT2015-71459-C2-1-P, Ministerio de Educación, Cultura y Deporte | Ref. FPU16/05492, Ministerio de Educación, Cultura y Deporte | Ref. PRX17/00157, European Comission | Ref. EAPA_151/2016 Interreg Atlantic Area