Skip to main content

NUEVO CONCEPTO DE IMPLANTE DENTAL BASADO EN LA APLICACION DE TECNICAS LASER Y MATERIALES FUNCIONALES GRADUALES CON ACTIVIDAD ANTIBACTERIANA

MAT2015-71459-C2-1-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Laser texturing of stainless steel under different processing atmospheres: from superhydrophilic to superhydrophobic surfaces

  • Pou Álvarez, Pablo
  • Del Val Garcia, Jesús
  • Riveiro Rodríguez, Antonio
  • Comesaña Piñeiro, Rafael
  • Arias González, Felipe
  • Lusquiños Rodríguez, Fernando
  • Boutinguiza Larosi, Mohamed
  • Quintero Martínez, Félix
  • Pou Saracho, Juan María
Wettability plays a major role in a variety of surface related phenomena, as corrosion, heat transfer or tissue adhesion on implants. Consequently, great research effort is being devoted to control the wetting degree of functional surfaces. Pulsed laser texturing at micro/nanometric level has been widely used for that purpose as a precision/time efficient technique. This work studies the role of the processing atmosphere in controlling the wettability of commercial AISI 304 by laser texturing. A pulsed laser source (λ = 532 nm) working at the nanosecond regime was employed and five different atmospheres were tested (i.e. O 2 , Air, CO 2 , N 2 , Ar). The results show clear differences in the wetting behaviour depending solely on the processing environment, ranging from hydrophilicity (31°) to hydrophobicity (125°). Those differences in wettability were found to be a consequence of changes in surface chemistry between samples processed under the various gases. The laser processing parameters showed a capability to tune the final wetting behaviour by controlling the topography and modulating the chemical composition given by the processing environment. It is demonstrated how the effects of the atmosphere can be exploited to tailor the wettability of the untreated surfaces (θ = 88°) up to the desired value, ranging from superhydrophilicity (θ = 0°) to superhydrophobicity (θ = 152°)., Xunta de Galicia | Ref. D431B 2016/042, Xunta de Galicia | Ref. ED481D 2017/010, Xunta de Galicia | Ref. ED481B 2016/047-0, Ministerio de Economía y Competitividad | Ref. MAT2015-71459-C2-1-P, Ministerio de Educación, Cultura y Deporte | Ref. FPU16/05492, Ministerio de Educación, Cultura y Deporte | Ref. PRX17/00157, European Comission | Ref. EAPA_151/2016 Interreg Atlantic Area
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

RE-irradiation of silver nanoparticles obtained by laser ablation in water and assessment of their antibacterial effect

  • Fernández Arias, Mónica
  • Boutinguiza Larosi, Mohamed
  • Del Val Garcia, Jesús
  • Medina, E
  • Muñoz Rodríguez, Daniel
  • Riveiro Rodríguez, Antonio
  • Comesaña Piñeiro, Rafael
  • Lusquiños Rodríguez, Fernando
  • Gil, F. J
  • Pou Saracho, Juan María
The rapid evolution of resistant bacteria is a huge problem in medicine because makes the treatment of infections more and more difficult. The bactericidal properties of noble metal nanoparticles could be a solution. In this work silver nanoparticles were produced by using two nanosecond Nd:YVO 4 lasers operating at 1064 and 532 nm respectively to ablate a silver target submerged in pure de-ionized water. Part of the resulting colloidal solution was injected as a fine stream by a compressed air system and re-irradiated one and three times with the same laser to resize and get uniform nanoparticles. The obtained nanoparticles by ablation and re-irradiation consisted of crystalline Ag nanoparticles with a bimodal size distribution. The particle size has been reduced by subsequent laser re-irradiation with both laser sources, reaching a 40% of mean size reduction. Inhibitory effects on the proliferation of Staphylococcus aureus was demonstrated on silver nanoparticles obtained after re-irradiation with the infrared laser., Xunta de Galicia | Ref. ED481D 2017/010, Xunta de Galicia | Ref. ED481B 2016/047-0, Xunta de Galicia | Ref. ED431B 2016/042, Ministerio de Economía y Competitividad | Ref. MAT2015-71459-C2-2-P, Ministerio de Economía y Competitividad | Ref. MAT2015-71459-C2-1-P, Ministerio de Educación, Cultura y Deporte | Ref. PRX17/00157