Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 45
Encontrada(s) 1 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

The heat flow in an optimal Fréchet space of unbounded initial data in Rd

  • Rodríguez Bernal, Aníbal
  • Robinson, James C.
In this paper we show that solutions of the heat equation that are given in terms of the heat kernel define semigroups on the family of Fréchet spaces Lp0 (Rd ), the intersection (over all ε > 0) of the spaces Lpε (Rd ) of functions such that ∫ Rd e−ε|x|2 |f (x)|p dx < ∞. These spaces consist of functions that are ‘large at infinity’, and L10 (Rd ) is the maximal space in which one can use the heat kernel to obtain globally-defined solutions of the heat equation. We prove suitable estimates from Lp0 (Rd ) into Lq0 (Rd ), q ≥ p, for these semigroups. We then consider the heat semigroup posed in spaces that are dual to these spaces of functions, namely the spaces Lp−ε (Rd ) of very-rapidly decreasing functions such that ∫ Rd eε|x|2 |f (x)|p dx < ∞. We show that (Lppε (Rd ))' = Lq−qε (Rd ) (with 1 <p< ∞ and (p, q) conjugate), and that the heat flow on Lpε (Rd ) is the adjoint of the flow on Lq−δ (Rd ) for an appropriate (time-dependent) choice of δ.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Using suprathreshold color-difference ellipsoids to estimate any perceptual color-difference

  • Morillas, Samuel|||0000-0001-9262-6139
  • Fairchild, Mark D.
[EN] Relating instrumentally measured to visually perceived colour-differences is one of the challenges of advanced colorimetry. Lately, the use of color difference formulas is becoming more important in the computer vision field as it is a key tool in advancing towards perceptual image processing and understanding. In the last decades, the study of contours of equal color-differences around certain color centers has been of special interest. In particular, the contour of threshold level difference that determines the just noticeable differences (JND) has been deeply studied and, as a result, a set of 19 different ellipsoids of suprathreshold color-difference is available in the literature. In this paper we study whether this set of ellipsoids could be used to compute any color difference in any region of the color space. To do so, we develop a fuzzy multi-ellipsoid model using the ellipsoids information along with two different metrics. We see that the performance of the two metrics vary significantly for very small, small, medium and large color differences. Therefore, we also study how to adapt two metric parameters to optimize performance. The obtained results outperform the currently CIE-recommended colordifference formula CIEDE2000., S. Morillas acknowledges the support of grants PRX16/00050 and PRX17/00384 (Ministerio de Educacion, Cultura y Deporte) and MTM2015-64373-13 (MINECO/FEDER, UE). The authors thank Dr. Manuel Melgosa, Dr. Luis Gomez-Robledo, Dr. Esther Sanabria-Codesal, Dr. Francisco Montserrat and Mr. Fu Jiang for providing useful materials, information and suggestions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Identifying the Machine Learning Family from Black-Box Models

  • Fabra-Boluda, Raúl
  • Ferri Ramírez, César|||0000-0002-8975-1120
  • Hernández-Orallo, José|||0000-0001-9746-7632
  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Ramírez Quintana, María José|||0000-0002-0559-3568
[EN] We address the novel question of determining which kind of machine learning model is behind the predictions when we interact with a black-box model. This may allow us to identify families of techniques whose models exhibit similar vulnerabilities and strengths. In our method, we first consider how an adversary can systematically query a given black-box model (oracle) to label an artificially-generated dataset. This labelled dataset is then used for training different surrogate models (each one trying to imitate the oracle¿s behaviour). The method has two different approaches. First, we assume that the family of the surrogate model that achieves the maximum Kappa metric against the oracle labels corresponds to the family of the oracle model. The other approach, based on machine learning, consists in learning a meta-model that is able to predict the model family of a new black-box model. We compare these two approaches experimentally, giving us insight about how explanatory and predictable our concept of family is., This material is based upon work supported by the Air Force Office of Scientific Research under award number FA9550-17-1-0287, the EU (FEDER), and the Spanish MINECO under grant TIN 2015-69175-C4-1-R, the Generalitat Valenciana PROMETEOII/2015/013. F. Martinez-Plumed was also supported by INCIBE under grant INCIBEI-2015-27345 (Ayudas para la excelencia de los equipos de investigacion avanzada en ciberseguridad). J. H-Orallo also received a Salvador de Madariaga grant (PRX17/00467) from the Spanish MECD for a research stay at the CFI, Cambridge, and a BEST grant (BEST/2017/045) from the GVA for another research stay at the CFI.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Contaminant Spill in a Sandbox with Non-Gaussian Conductivities: Simultaneous Identification by the Restart Normal-Score Ensemble Kalman Filter

  • Chen, Zi
  • Xu, Teng
  • Zanini, Andrea
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
[EN] The joint identification of the parameters defining a contaminant source and the heterogeneous distribution of the hydraulic conductivities of the aquifer where the contamination took place is a difficult task. Previous studies have demonstrated the applicability of the restart normal-score ensemble Kalman filter (rNS-EnKF) in synthetic cases making use of sufficient hydraulic head and concentration data. This study shows an application of the same technique to a non-synthetic case under laboratory conditions and discusses the difficulties found on its application and the avenues taken to solve them. The method is first tested using a synthetic case that mimics the sandbox experiment to establish the minimum number of ensemble members and the best technique to prevent the filter collapsing. The synthetic case shows that among different techniques based on update damping and covariance inflation, the Bauser's covariance inflation method works best in preventing filter collapse. Its application to the sandbox data shows that the rNS-EnKF can benefit from Bauser's inflation to reduce the number of ensemble realizations substantially in comparison with a filter without inflation, arriving at a good joint identification of both the contaminant source and the spatial heterogeneity of the conductivities., Financial support to carry out this work was received from the Spanish Ministry of Science and Innovation through project PID2019-109131RB-I00, and from the Spanish Ministry of Education through project PRX17/00150. Teng Xu also acknowledges the financial support from the Fundamental Research Funds for the Central Universities (B200201015) and Jiangsu Specially-Appointed Professor Program (B19052). And the authors would like to thank University of Parma for providing the experimental equipment. Part of the work was performed during a stay of the third author at the University of Parma under the TeachinParma initiative, co-funded by Fondazione Cariparma and University of Parma.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Fusibles estructurales para evitar la propagación de fallos en las cimbras de edificación

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Moragues, Juan J|||0000-0001-8111-5480
  • Oliver-Cano, Marina
  • Adam, Jose M|||0000-0002-9205-8458
[ES] La construcción de edificios con estructura de hormigón armado se realiza, habitualmente, con la ayuda de puntales metálicos que se encargan de transmitir las cargas de las plantas recién hormigonadas a las inferiores. Los principales problemas que presenta el empleo de puntales son: a) la aparición de cargas superiores a las previstas en los puntales, pudiendo provocar el colapso de toda la cimbra o incluso del edificio, b) la heterogeneidad de las cargas que reciben los puntales de una misma planta cimbrada, y c) la limitada variedad de puntales de que disponen las casas comerciales. Todo ello obliga a que, en la mayor parte de las ocasiones, los puntales empleados en las obras estén claramente sobredimensionados. En este artículo se presenta el fusible estructural para el control de la carga de los puntales (también llamado limitador de carga o LL por sus siglas en inglés), que fue desarrollado en ICITECH a partir de estudios teóricos avanzados, una intensa campaña experimental y la ejecución de una prueba de concepto. El artículo se compone de: 1) una breve recopilación de los trabajos experimentales y de validación computacional llevados a cabo; y 2) el estudio realizado con simulación numérica avanzada para evaluar y cuantificar la posible mitigación del daño y el riesgo de fallo de estructuras de edificios durante su construcción. De los resultados obtenidos se puede afirmar que con el uso de LLs se consigue una mejora: de la seguridad, frente a fallos locales de la cimbra cuyas consecuencias podrían propagarse de forma desproporcionada; de la eficiencia estructural, con una mayor uniformidad en las cargas que reciben los puntales; y de los costes del sistema de apuntalamiento., Los autores quieren expresar su gratitud a todas las entidades por la financiación recibida (FPU13/02466; PRX17/00302; GV/2015/063; APOSTD/2019/101; 101000396; IJC2020- 042642-I), así como a las empresas Encofrado J. Alsina S.A. y Levantina, Ingeniería y Construcción S.L. por su invalorable cooperación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hardy space of translated Dirichlet series

  • Fernández Vidal, Tomás
  • Galicer, Daniel
  • Mereb, Martín
  • Sevilla Peris, Pablo|||0000-0001-5222-4768
[EN] We study the Hardy space of translated Dirichlet series H+. It consists on those Dirichlet series Sigma a(n)n(-s) such that for some (equivalently, every) 1 <= p < infinity, the translation Sigma a(n)n(-(s+ 1/sigma)) belongs to the Hardy space H-p for every sigma > 0. We prove that this set, endowed with the topology induced by the seminorms {parallel to center dot parallel to(2,k)}(k is an element of N) (where parallel to Sigma a(n)n(-s) parallel to(2,k) is defined as parallel to Sigma a(n)n(-(s+ 1/k))parallel to(H2)), is a Frechet space which is Schwartz and non nuclear. Moreover, the Dirichlet monomials {n(-s)}(n is an element of N) are an unconditional Schauder basis of H+. We also explore the connection of this new space with spaces of holomorphic functions on infinite-dimensional spaces. In the spirit of Gordon and Hedenmalm's work, we completely characterize the composition operator on the Hardy space of translated Dirichlet series. Moreover, we study the superposition operators on H+ and show that every polynomial defines an operator of this kind. We present certain sufficient conditions on the coefficients of an entire function to define a superposition operator. Relying on number theory techniques we exhibit some examples which do not provide superposition operators. We finally look at the action of the differentiation and integration operators on these spaces., We would like to warmly thank Jose Bonet, Andreas Defant and Manuel Maestre for enlightening remarks and comments and fruitful discussions that improved the paper. We would also like to thank the referees for their careful reading and helpful comments. The research of T. Fernandez Vidal was supported by PICT 2015-2299. The research of D. Galicer was partially supported by CONICET-PIP 11220130100329CO and 2018-04250. The research of M. Mereb was partially supported by CONICET-PIP 11220130100073CO and PICT 2018-03511. The research of P. Sevilla-Peris was supported by MICINN and FEDER Project MTM2017-83262-C2-1-P and MECD Grant PRX17/00040.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Avoiding failures during building construction using structural fuses as load limiters on temporary shoring structures

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
  • Sagaseta, Juan
[EN] The risk of structural failure of buildings can be significant during construction. Temporary adjustable telescopic steel shores or props are commonly used in building construction. The failure of shores is sudden and therefore structural fuses as load limiters (LL) can be introduced to provide ductility in the temporary member for a specified limit failure load. Previous work by the authors showed that the design of shoring systems can be improved using LL for standard cases of imposed loads applied during construction. This paper extends this work to cases of accidental loading where the shoring system-permanent structure interaction is less known. The main principles of LLs are discussed and implemented in advanced numerical simulations of a real case RC building during construction by means of explicit nonlinear dynamic finite element analyses. Different local failure scenarios were investigated corresponding to cases observed in practice. The comparison of the numerical results obtained with and without LLs demonstrated for the first time the benefits of using LLs in terms of: (a) mitigating the risk of failure of the temporary structure; and (b) reducing permanent damage (cracking and short-term deflections in the slab) affecting the durability and functionality of the building., The authors would like to express their gratitude to the Spanish Ministry of Education, Culture and Sport for funding received under: (a) the FPU Program [FPU13/02466] and complementary funding received for a stay at the University of Surrey (UK), and (b) the Mobility Program (Salvador de Madariaga 2017) of the Promotion of Talent and Employability within the state s Research & Innovation Program 2013 2016 [PRX17/00302]. The authors would also like to thank the Generalitat Valenciana (Spain) for funding received [GV/2015/063], Dr. P. Olmati, who developed the preliminary FE model of the structure at the operational stage as part of a project sponsored by the EPSRC (UK) Impact Acceleration Account held by the University of Surrey [Grant Ref: EP/K503939] linked to a previous project funded by the EPSRC [Grant Ref: EP/K008153/1], and Dr. J. Asensi for providing the photograph included in Fig. 1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

AI Generality and Spearman&apos, s Law of Diminishing Returns

  • Hernández-Orallo, José|||0000-0001-9746-7632
[EN] Many areas of AI today use benchmarks and competitions with larger and wider sets of tasks. This tries to deter AI systems (and research effort) from specialising to a single task, and encourage them to be prepared to solve previously unseen tasks. It is unclear, however, whether the methods with best performance are actually those that are most general and, in perspective, whether the trend moves towards more general AI systems. This question has a striking similarity with the analysis of the so-called positive manifold and general factors in the area of human intelligence. In this paper, we first show how the existence of a manifold (positive average pairwise task correlation) can also be analysed in AI, and how this relates to the notion of agent generality, from the individual and the populational points of view. From the populational perspective, we analyse the following question: is this manifold correlation higher for the most or for the least able group of agents? We contrast this analysis with one of the most controversial issues in human intelligence research, the so-called Spearman's Law of Diminishing Returns (SLODR), which basically states that the relevance of a general factor diminishes for most able human groups. We perform two empirical studies on these issues in AI. We analyse the results of the 2015 general video game AI (GVGAI) competition, with games as tasks and "controllers" as agents, and the results of a synthetic setting, with modified elementary cellular automata (ECA) rules as tasks and simple interactive programs as agents. In both cases, we see that SLODR does not appear. The data, and the use of just two scenarios, does not clearly support the reverse either, a Universal Law of Augmenting Returns (ULOAR), but calls for more experiments on this question., I thank the anonymous reviewers of ECAI'2016 for their comments on an early version of the experiments shown in Section 4. I'm really grateful to Philip J. Bontrager, Ahmed Khalifa, Diego Perez-Liebana and Julian Togelius for providing me with the GVGAI competition data that made Section 3 possible. David Stillwell and Aiden Loe suggested the use of person-fit as a measure of generality. The JAIR reviewers have provided very insightful and constructive comments, which have greatly helped to improve the final version of this paper. This work has been partially supported by the EU (FEDER) and Spanish MINECO grant TIN2015-69175-C4-1-R, and by Generalitat Valenciana PROMETEOII/2015/013 and PROMETEO/2019/098. I also thank the support from the Future of Life Institute through FLI grant RFP2-152. Part of this work has been done while visiting the Leverhulme Centre for the Future of Intelligence, generously funded by the Leverhulme Trust. I also thank the UPV for granting me a sabbatical leave and the funding from the Spanish MECD programme "Salvador de Madariaga" (PRX17/00467) and a BEST grant (BEST/2017/045) from the Generalitat Valenciana for another research stay also at the CFI.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effects of sudden failure of shoring elements in concrete building structures under construction

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
  • Sagaseta, Juan
[EN] The most frequently used technique to construct reinforced concrete (RC) building structures is the shoring or propping of successive floors, in which the slabs are supported by the shores until the concrete acquires sufficient strength. A significant number of structural failures have been reported during construction in recent years leading in some cases to the progressive collapse of the whole structure. The collapse often starts with the local failure of a single element which could be due to errors in design or construction and/or due to accidental events. Although this is a well-recognized problem, studies on the effects of local failure in the shoring elements on the integrity of the shoring-structure system have not been carried out in the past. In this work advanced numerical finite element models were carried out of a three-storey RC building and its shoring system. Four scenarios of local failure were considered: sudden removal of a (1) shore, (2) joist and (3) complete shore line; and (4) incorrect selection of shores. The results indicated that the structure-shoring system was able to develop al- ternative load paths without dynamic amplification effects due to the large stiffness and redundancy of the system without compromising the integrity of the structure but leading to significant damage in the concrete slabs. Design recommendations are also given based on the results from this study, which pretend to be the first study to focus on the structural response and damage of a building structure under construction after the sudden failure of one or more shores., The authors would like to express their gratitude to the Spanish Ministry of Education, Culture and Sport for funding received under: (a) the FPU Program [FPU13/02466] and complementary funding received for a stay at the University of Surrey (UK), and (b) the Mobility Program (Salvador de Madariaga 2017) of the Promotion of Talent and Employability within the state's Research & Innovation Program 2013-2016 [PRX17/00302]. The authors would like to thank Dr. P. Olmati who developed the prelimiundernary FE model of the structure at the operational stage as part of a project sponsored by the EPSRC Impact Acceleration Account held by the University of Surrey (grant ref: EP/ K503939) linked with a previous project funded by the EPSRC (grant ref: EP/K008153/1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Joint identification of contaminant source and aquifer geometry in a sandbox experiment with the restart ensemble Kalman filter

  • Chen, Zi
  • Xu, Teng
  • Zanini, Andrea
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
[EN] Contaminant source identification is a key problem in handling groundwater pollution events. The ensemble Kalman filter (EnKF) is used for the spatiotemporal identification of a point contaminant source in a sandbox experiment, together with the identification of the position and length of a vertical plate inserted in the sandbox that modifies the geometry of the system. For the identification of the different parameters, observations in time of solute concentration are used, but not of piezometric head data since they were not available. A restart version of the EnKF is utilized because it is necessary to restart the forecast from time zero after each parameter update. The results show that the restart EnKF is capable of identifying both contaminant source information and aquifer-geometry-related parameters together with an uncertainty estimate of such identification., Financial support to carry out this work was received from the Spanish Ministry of Economy and Competitiveness through project CGL2014-59841-P, and from the Spanish Ministry of Education, Culture and Sports through a fellowship for the mobility of professors in foreign research and higher education institutions to the second author, reference PRX17/00150. The authors also would like to thank Universita degli Studi di Parma for providing the experimental equipment and data
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Montel-Type Theorem for Hardy Spaces of Holomorphic Functions

  • Fernández Vidal, Tomás
  • Galicer, Daniel
  • Sevilla Peris, Pablo|||0000-0001-5222-4768
[EN] We give a version of the Montel theorem for Hardy spaces of holomorphic functions on an infinite dimensional space. Precisely, we show that any bounded sequence of holomorphic functions in some Hardy space, has a subsequence that converges uniformly over compact subsets to a function that also belongs to the same Hardy space. As a by-product of our results for spaces of functions on infinitely many variables, we also provide an elementary proof of a Montel-type theorem for the Hardy space of Dirichlet series., Supported by PICT 2015-2299 and PICT 2018-0425. Daniel Galicer: Supported by CONICET-PIP 2014-2016 and PICT 2018-0425. Pablo Sevilla-Peris: Supported by MINECO and FEDER Project MTM2017-83262C2-1-P, GV Project AICO/2021/170 and MECD Grant PRX17/00040.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Surveying Safety-relevant AI Characteristics

  • Hernández-Orallo, José|||0000-0001-9746-7632
  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Avin, Shahar
  • Heigeartaigh, Sean O.
[EN] The current analysis in the AI safety literature usually combines a risk or safety issue (e.g., interruptibility) with a particular paradigm for an AI agent (e.g., reinforcement learning). However, there is currently no survey of safety-relevant characteristics of AI systems that may reveal neglected areas of research or suggest to developers what design choices they could make to avoid or minimise certain safety concerns. In this paper, we take a first step towards delivering such a survey, from two angles. The first features AI system characteristics that are already known to be relevant to safety concerns, including internal system characteristics, characteristics relating to the effect of the external environment on the system, and characteristics relating to the effect of the system on the target environment. The second presents a brief survey of a broad range of AI system characteristics that could prove relevant to safety research, including types of interaction, computation, integration, anticipation, supervision, modification, motivation and achievement. This survey enables further work in exploring system characteristics and design choices that affect safety concerns, FMP and JHO were supported by the EU (FEDER) and the Spanish MINECO under grant TIN 2015-69175-C4-1-R, by Generalitat Valenciana (GVA) under grant PROME-TEOII/2015/013 and by the U.S. Air Force Office of Scientific Research under award number FA9550-17-1-0287. FMP was also supported by INCIBE (Ayudas para la excelencia de los equipos de investigacion avanzada en ciberseguridad), the European Commission, JRC¿s Centre for Advanced Studies, HUMAINT project (Expert Contract CT-EX2018D335821-101), and UPV PAID-06-18 Ref. SP20180210. JHO was supported by a Salvador de Madariaga grant (PRX17/00467) from the Spanish MECD for a research stay at the Leverhulme Centre for the Future of Intelligence (CFI), Cambridge, and a BEST grant (BEST/2017/045) from GVA for another research stay also at the CFI. JHO and SOH were supported by the Future of Life Institute (FLI) grant RFP2-152. SOH was also supported by the Leverhulme Trust Research Centre Grant RC2015-067 awarded to the Leverhulme Centre for the Future of Intelligence, and a a grant from Templeton World Charity Foundation
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dual Indicators to Analyse AI Benchmarks: Difficulty, Discrimination, Ability and Generality

  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Hernández-Orallo, José|||0000-0001-9746-7632
[EN] With the purpose of better analyzing the result of artificial intelligence (AI) benchmarks, we present two indicators on the side of the AI problems, difficulty and discrimination, and two indicators on the side of the AI systems, ability and generality. The first three are adapted from psychometric models in item response theory (IRT), whereas generality is defined as a new metric that evaluates whether an agent is consistently good at easy problems and bad at difficult ones. We illustrate how these key indicators give us more insight on the results of two popular benchmarks in AI, the Arcade Learning Environment (Atari 2600 games) and the General Video Game AI competition, and we include some guidelines to estimate and interpret these indicators for other AI benchmarks and competitions., This work was supported by the U.S. Air Force Office of Scientific Research under Award FA9550-17-1-0287; in part by the EU (FEDER) and the Spanish MINECO under Grant TIN 2015-69175-C4-1-R; and in part by the Generalitat Valenciana PROMETEOII/2015/013. The work of F. Mart ' inez-Plumed was supported by INCIBE (Ayudas para la excelencia de los equipos de investigaci ' on avanzada en ciberseguridad), the European Commission, JRC's Centre for Advanced Studies, HUMAINT project (Expert Contract CT-EX2018D335821-101), and UPV PAID-06-18 Ref. SP20180210. The work of J. Hern ' andez-Orallo was supported in part by Salvador de Madariaga grant (PRX17/00467) from the Spanish MECD, in part by the BEST Grant (BEST/2017/045) from the GVA for research stays at the CFI, and in part by the FLI grant RFP2-152.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Robustness of RC building structures with infill masonry walls: tests on a purpose-built structure

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Adam, Jose M|||0000-0002-9205-8458
  • Bertolesi, Elisa
  • Juan Sagaseta
[EN] Structural robustness is a significant property towards improving resilience of buildings, i.e. enhance their ability to withstand and recover from extreme events which often can cause local damage and progressive collapse. It is widely accepted that robustness depends on the capacity of the structure to activate alternative load paths (ALPs) after the failure of load-bearing elements, e.g. columns. Early evidence during World War II showed that progressive collapse of some buildings was avoided by the presence of masonry infill walls. Subsequent studies focused on this effect for cases of sudden column removal although most of these studies were analytical, numerical and only looked at internal columns which are generally less vulnerable to accidental events compared to corner and edge columns. The aim of this study was to analyse how infill walls can improve the robustness of reinforced concrete (RC) buildings in corner columns failure scenarios. A purpose-built 3D two-storey full-scale RC building structure with infill masonry walls was tested. The contribution of masonry infill walls was analysed in terms of: i) load redistribution, ii) ALPs, and iii) Dynamic Amplification Factors (DAFs) to be applied in linear-static analyses. The test was highly monitored by 38 strain gauges, 38 LVDTs and 2 accelerometers to register the vertical and lateral response. The results showed that masonry infill walls had a significant influence on the structural response and activated the predominant ALPs at very small deflections., This work was carried out with the support of a 2017 Leonardo Grant for Researchers and Cultural Creators from the BBVA Foundation. The authors would also like to express their gratitude to the Levantina, Ingenieria y Construccion S.L. (LIC) company for funding the construction of the building, and to the Generalitat Valenciana/Fons Social Europeu [APOSTD/2019/101] and Universitat Politecnica de Valencia [PAID-10-17] for funding received under different postdoctoral programs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

MONOMIAL CONVERGENCE ON l(r)

  • Galicer, Daniel
  • Mansilla, Martín
  • Muro, Santiago
  • Sevilla Peris, Pablo|||0000-0001-5222-4768
[EN] We develop a novel decomposition of the monomials in order to study the set of monomial convergence for spaces of holomorphic functions over l(r) for 1 < r <= 2. For H-b. (l(r)), the space of entire functions of bounded type in l(r), we prove that mon H-b (l(r)) is exactly the Marcinkiewicz sequence space m(psi r), where the symbol psi(r) is given by psi(r) (n) :=log(n + 1)(1-1/r) for n is an element of N-0. For the space of m-homogeneous polynomials on l(r), we prove that the set of monomial convergence mon P((m)l(r)) contains the sequence space l(q), where q = (mr')'. Moreover, we show that for any q <= s < infinity, the Lorentz sequence space l(q),(s) lies in mon P((m)l(r)), provided that m is large enough. We apply our results to make an advance in the description of the set of monomial convergence of H-infinity (B-lr) (the space of bounded holomorphic functions on the unit ball of l(r)). As a byproduct we close the gap on certain estimates related to the mixed unconditionality constant for spaces of polynomials over classical sequence spaces., This work was partially supported by projects CONICET PIP 11220130100329CO, ANPCyT PICT 20152224, ANPCyT PICT 2015-2299, ANPCyT PICT 2015-3085, ANPCyT PICT 2018-04250, UBACyT 20020130100474BA, UBACyT 20020130300052BA, UBACyT 20020130300057BA. Mansilla was supported by a CONICET doctoral fellowship. Sevilla-Peris was supported by MINECO/FEDER Project MTM2017-83262-C2-1-P and grant PRX17/00040 of the Spanish Government.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Item response theory in AI: Analysing machine learning classifiers at the instance level

  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Hernández-Orallo, José|||0000-0001-9746-7632
  • Prudencio, Ricardo
  • Martínez-Usó, Adolfo
[EN] AI systems are usually evaluated on a range of problem instances and compared to other AI systems that use different strategies. These instances are rarely independent. Machine learning, and supervised learning in particular, is a very good example of this. Given a machine learning model, its behaviour for a single instance cannot be understood in isolation but rather in relation to the rest of the data distribution or dataset. In a dual way, the results of one machine learning model for an instance can be analysed in comparison to other models. While this analysis is relative to a population or distribution of models, it can give much more insight than an isolated analysis. Item response theory (IRT) combines this duality between items and respondents to extract latent variables of the items (such as discrimination or difficulty) and the respondents (such as ability). IRT can be adapted to the analysis of machine learning experiments (and by extension to any other artificial intelligence experiments). In this paper, we see that IRT suits classification tasks perfectly, where instances correspond to items and classifiers correspond to respondents. We perform a series of experiments with a range of datasets and classification methods to fully understand what the IRT parameters such as discrimination, difficulty and guessing mean for classification instances (and their relation to instance hardness measures) and how the estimated classifier ability can be used to compare classifier performance in a different way through classifier characteristic curves., This work has been partially supported by the EU (FEDER) and the Ministerio de Economia y Competitividad (MINECO) in Spain grant TIN2015-69175-C4-1-R, the Air Force Office of Scientific Research under award number FA9550-17-1-0287, and the REFRAME project, granted by the European Coordinated Research on Long-term Challenges in Information and Communication Sciences Technologies ERA-Net (CHIST-ERA) and funded by Ministerio de Economia y Competitividad (MINECO) in Spain (PCIN-2013-037), and by Generalitat Valenciana PROMETEOII/2015/013. Fernando Martinez-Plumed was also supported by INCIBE (INCIBEI-2015-27345) "Ayudas para la excelencia de los equipos de investigacion avanzada en ciberseguridad", the European Commission (Joint Research Centre) HUMAINT project (Expert Contract CT-EX2018D335821-101), and Universitat Politecnica de Valencia (PAID-06-18 Ref. SP20180210). Ricardo Prudencio was financially supported by CNPq (Brazilian Agency). Jose Hernandez-Orallo was supported by a Salvador de Madariaga grant (PRX17/00467) from the Spanish MECD for a research stay at the Leverhulme Centre for the Future of Intelligence (CFI), Cambridge, a BEST grant (BEST/2017/045) from the Valencia GVA for another research stay also at the CFI, and an FLI grant RFP2.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A comparison between ES-MDA and restart EnKF for the purpose of the simultaneous identification of a contaminant source and hydraulic conductivity

  • Xu, Teng
  • Chen, Zi
  • Lu, Chunhui
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
[EN] Understanding a contaminant source may help in a better management and risk assessment of a polluted aquifer. However, contaminant source information may not be available when a pollutant is detected in a drinking well. The restart ensemble Kalman filter (restart EnKF, also named r-EnKF) has been demonstrated in synthetic and laboratory experiments as an efficient solution for the identification of a contaminant source. Recently, the ensemble smoother with multiple data assimilation (ES-MDA) has been proposed as an alternative to the r-EnKF as a more efficient solution given that the r-EnKF needs to restart the simulation of the state equation from time zero after each data assimilation step. An analysis, in a synthetic aquifer, of the accuracy of the ES-MDA for the simultaneous identification of a contaminant source and the spatial distribution of hydraulic conductivity by assimilating both piezometric head and concentration observations is carried out using the r-EnKF as a benchmark. The conclusion is that the ES-MDA can outperform the r-EnKF, but the expected speed advantage, associated with the possibility of assimilating all data at once, does not exist. For the ES-MDA to reach the same level of accuracy as the r-EnKF, the number of multiple data assimilations must be large, and final computing time is similar for both approaches. However, the ES-MDA can do much better than the r-EnKF if the number of iterations increases even further, with the consequent increase of computational cost., Financial support to carry out this work was received from the Spanish Ministry of Economy and Competitiveness through project CGL2014-59841-P, and from the Spanish Ministry of Education, Culture and Sports through a fellowship for the mobility of professors in foreign research and higher education institutions of reference to the second author, reference PRX17/00150. Teng Xu also acknowledges the financial support from the Fundamental Research Funds for the Central Universities (B200201015) and Jiangsu Specially-Appointed Professor Program (B19052). Chunhui Lu acknowledges the financial support from the National Natural Science Foundation of China (51679067 and 51879088), and Fundamental Research Funds for the Central Universities (B200204002).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hausdorff-Young-type inequalities for vector-valued Dirichlet series

  • Carando, Daniel
  • Marceca, Felipe
  • Sevilla Peris, Pablo|||0000-0001-5222-4768
[EN] We study Hausdorff-Young-type inequalities for vector-valued Dirichlet series which allow us to compare the norm of a Dirichlet series in the Hardy space H-p(X) with the q-norm of its coefficients. In order to obtain inequalities completely analogous to the scalar case, a Banach space must satisfy the restrictive notion of Fourier type/cotype. We show that variants of these inequalities hold for the much broader range of spaces enjoying type/cotype. We also consider Hausdorff-Young-type inequalities for functions defined on the infinite torus T-infinity or the boolean cube {- 1, 1}(infinity). As a fundamental tool we show that type and cotype are equivalent to a hypercontractive homogeneous polynomial type and cotype, a result of independent interest., The third author was supported by MICINN and FEDER Project MTM2017-83262-C2-1-P and MECD grant PRX17/00040.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of a Submillimetric GNSS-Based Distance Meter for Length Metrology

  • García-Asenjo Villamayor, Luis|||0000-0001-6535-2216
  • Baselga Moreno, Sergio|||0000-0002-0492-4003
  • Atkins, Chris
  • Garrigues Talens, Pascual
[EN] Absolute distance determination in the open air with an uncertainty of a few tenths of a millimetre is increasingly required in many applications that involve high precision geodetic metrology. No matter the technique used to measure, the resulting distances must be proven consistent with the unit of length (SI-metre) as realized in the outdoor facilities traditionally used in length metrology, which are also known as calibration baselines of reference. The current calibration baselines of reference have distances in the range of 10 to 1000 m, but at present there is no solution on the market to provide distances with submillimetric precision in that range. Consequently, new techniques such as multi-wave interferometry, two-wave laser telemeters or laser trackers are being developed. A possible alternative to those sophisticated and expensive techniques is the use of widely used Global Navigation Satellite Systems (GNSS) in order to provide a GNSS-Based Distance Meter (GBDM). The use of a GBDM as a potential technique for length metrology has been thoroughly analysed in several European research projects by using the state-of-the-art geodetic software, such as Bernese 5.2, but no definite conclusions have been drawn and some metrological questions are considered still open. In this paper, we describe a dedicated approach to build up a submillimetric GBDM able to be applied in the current calibration baselines of reference, as well as possible methods to cope with the multipath error of the GNSS signals which is the major limitation for the practical uptaking of the technique in metrology. The accuracy of the proposed approach has been tested following the length metrology standards in four experiments carried out in the Universitat Politecnica de Valencia (UPV). The results demonstrate that the proposed GBDM can provide an accuracy of a few tenths of a millimetre in the current calibration baselines of reference, This work was partly performed within the 18SIB01 GeoMetre project of the European Metrology Programme for Innovation and Research (EMPIR). This project has received funding from the EMPIR programme co-financed by the Participating States and from the European Union's Horizon 2020 research and innovation programme. This research was also partly funded by the Spanish Ministry of Education, Culture and Sports (PRX17/00371).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Spectral Reflectance Reconstruction Using Fuzzy Logic System Training: Color Science Application

  • Amiri, Morteza Maali
  • Fairchild, Mark D.
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Morillas, Samuel|||0000-0001-9262-6139
[EN] In this work, we address the problem of spectral reflectance recovery from both CIEXYZ and RGB values by means of a machine learning approach within the fuzzy logic framework, which constitutes the first application of fuzzy logic in these tasks. We train a fuzzy logic inference system using the Macbeth ColorChecker DC and we test its performance with a 130 sample target set made out of Artist's paints. As a result, we obtain a fuzzy logic inference system (FIS) that performs quite accurately. We have studied different parameter settings within the training to achieve a meaningful overfitting-free system. We compare the system performance against previous successful methods and we observe that both spectrally and colorimetrically our approach substantially outperforms these classical methods. In addition, from the FIS trained we extract the fuzzy rules that the system has learned, which provide insightful information about how the RGB/XYZ inputs are related to the outputs. That is to say that, once the system is trained, we extract the codified knowledge used to relate inputs and outputs. Thus, we are able to assign a physical and/or conceptual meaning to its performance that allows not only to understand the procedure applied by the system but also to acquire insight that in turn might lead to further improvements. In particular, we find that both trained systems use four reference spectral curves, with some similarities, that are combined in a non-linear way to predict spectral curves for other inputs. Notice that the possibility of being able to understand the method applied in the trained system is an interesting difference with respect to other 'black box' machine learning approaches such as the currently fashionable convolutional neural networks in which the downside is the impossibility to understand their ways of procedure. Another contribution of this work is to serve as an example of how, through the construction of a FIS, some knowledge relating inputs and outputs in ground truth datasets can be extracted so that an analogous strategy could be followed for other problems in color and spectral science., Samuel Morillas acknowledges the support of the Spanish Ministry of Science under grants PRX17/00384, PRX16/00050 and PID2019-107790RB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Stochastic Identification of Pollutant Sources in Aquifers by the Ensemble Kalman Filter

  • Chen, Zi
[ES] Como parte de los métodos de asimilacíon de datos, los métodos basados en conjuntos han ganado popularidad en hidrogeología dada su capacidad para manejar grandes cantidades de datos observados simultáneamente. Recientemente, se ha comenzado a emplear este método para la identificacíon de fuentes de contaminacíon en casos sintéticos. Basándonos en estos trabajos anteriores, hemos dado un paso adelante evaluando su rendimiento en experimentos de tanque de laboratorio. La tesis se puede dividir en cuatro partes. En la primera parte, el filtro de Kalman de conjuntos con reinicio (r-EnKF) se utiliza para la identificacíon espacio-temporal de una fuente puntual de contaminantes en un experimento en tanque de laboratorio, junto con la identificacíon de la posicíon y longitud de una placa vertical insertada en el tanque que modifica la geometría del sistema. Los resultados muestran que el r-EnKF es capaz de identificar tanto la fuente como los parámetros relacionados con la geometría del acuífero. La segunda parte muestra una aplicacíon del filtro de Kalman de conjuntos con anamorfosis normal y reinicio (NS-EnKF) y con inflacíon de la covarianza en un experimento de laboratorio con conductividad heterogénea. El método se prueba primero utilizando un caso sintético que imita el experimento del tanque para establecer el número mínimo de miembros del conjunto y la mejor técnica para evitar el colapso del filtro. Luego, su aplicacíon a los datos del tanque muestra que el NS-EnKF con reinicio puede beneficiarse de la inflacíon de Bauser para reducir el tama ñ o del conjunto y llegar a una buena identificacíon conjunta tanto de la fuente de contaminantes como de la heterogeneidad espacial de las conductividades. En la tercera parte, el filtro de Kalman de conjuntos suavizado con asimilacíon múltiple de datos (ES-MDA) se emplea para la identificacíon simultánea de una fuente de contaminantes y la distribucíon espacial de la conductividad hidráulica utilizando el r-EnKF como punto de referencia. El resultado muestra que el ES-MDA puede superar al r-EnKF, marginalmente, para el caso sintético específico analizado con el mismo consumo de CPU, y puede funcionar mucho mejor que el r-EnKF a cambio de un mayor costo de CPU. La cuarta y última parte investiga el rendimiento del ES-MDA en un problema de identificacíon de una inyeccíon de contaminante que varía en el tiempo. Se analiza la influencia de diferentes intervalos de observacíon y esquemas de inflacíon de la covarianza en la determinacíon de la curva de inyeccíon. El resultado muestra que el ES-MDA funciona muy bien en la identificacíon de la curva de inyeccíon cuando la discretizacíon de la misma no es muy alta, pero encuentra problemas de fluctuacíon en los casos con discretizaciones altas. La frecuencia con la que se muestrean los datos de observacíon es un factor influyente, mientras que el número de iteraciones o los métodos de inflacíon de la covarianza tienen menos efecto., [CA] Com a part dels mètodes d'assimilació de dades, els mètodes basats en conjunts han guanyat popularitat en hidrogeologia donada la seua capacitat per a manejar grans quantitats de dades observades simultàniament. Recentment, s'ha començat a emprar aquest mètode per a la identificació de fonts de contaminació en casos sintètics. Basant-nos en aquests treballs anteriors, hem fet un pas avant avaluant el seu rendiment en experiments de tanc de laboratori. La tesi es pot dividir en quatre parts.En la primera part, el filtre de Kalman de conjunts amb reinici (r-EnKF) s'utilitza per a la identificació espaciotemporal d'una font puntual de contaminants en un experiment en tanc de laboratori, juntament amb la identificació de la posició i longitud d'una placa vertical inserida en el tanc que modifica la geometria del sistema. Els resultats mostren que el r-EnKF és capaç d'identificar tant la font com els paràmetres relacionats amb la geometria de l'aqüífer. La segona part mostra una aplicació del filtre de Kalman de conjunts amb anamorfosis normal i reinici (NS-EnKF) i amb inflació de la covariància en un experiment de laboratori amb conductivitat heterogènia. El mètode es prova primer utilitzant un cas sintètic que imita l'experiment del tanc per a establir el nombre mínim de membres del conjunt i la millor tècnica per a evitar el col·lapse del filtre. Després, la seua aplicació a les dades del tanc mostra que el NS-EnKF amb reinici pot beneficiar-se de la inflació de Bauser per a reduir la grandària del conjunt i arribar a una bona identificació conjunta tant de la font de contaminants com de l'heterogeneïtat espacial de les conductivitats. En la tercera part, el filtre de Kalman de conjunts suavitzat amb assimilació múltiple de dades (ES-MDA) s'empra per a la identificació simultània d'una font de contaminants i la distribució espacial de la conductivitat hidràulica utilitzant el r-EnKF com a punt de referència. El resultat mostra que l'ES-MDA pot superar al r-EnKF, marginalment, per al cas sintètic específic analitzat amb el mateix consum de CPU, i pot funcionar molt millor que el r-EnKF a canvi d'un major cost de CPU. La quarta i última part investiga el rendiment de l'ES-MDA en un problema d'identificació d'una injecció de contaminant que varia en el temps. S'analitza la influència de diferents intervals d'observació i esquemes de inflació de la covariància en la determinació de la corba d'injecció. El resultat mostra que l'ES-MDA funciona molt bé en la identificació de la corba d'injecció quan la discretització no és massa alta, però troba problemes de fluctuació amb discretitzacions massa fines. La freqüència amb la qual es mostregen les dades d'observació és un factor influent en aquesta aplicació, mentre que el nombre d'iteracions o els mètodes d'inflació de la covariància tenen menys efecte., [EN] As part of the data assimilation methods, the ensemble-based methods have gained popularity in hydrogeology given their ability to deal with huge amounts of observed data simultaneously. More recently, researchers have started to employ these methods to deduce contamination source information in synthetic cases. Based on these previous work, we take a step further to evaluate their performance in sandbox experiments. The main objective of this thesis is to verify the capacity of the ensemble-based methods in identifying contaminant sources and complex geological heterogeneity. The thesis could be divided into four parts. In the first part, the restart ensemble Kalman filter (r-EnKF) is used for the spatiotemporal identification of a point contaminant source in a sandbox experiment, together with the identification of the position and length of a vertical plate inserted in the sandbox that modifies the geometry of the system. The results show that the r-EnKF is capable of identifying both contaminant source information and aquifer-geometry-related parameters. The second part shows an application of the restart normal-score ensemble Kalman filter (NS-EnKF) with covariance inflation in a heterogenous conductivity laboratory experiment. The method is first tested using a synthetic case that mimics the sandbox experiment to establish the minimum number of ensemble members and the best technique to prevent filter collapse. Then, its application to the sandbox data shows that the restart NS-EnKF can benefit from Bauser's inflation to reduce the ensemble size and to arrive to a good joint identification of both the contaminant source and the spatial heterogeneity of conductivities. In the third part, the ensemble smoother with multiple data assimilation (ES-MDA) is employed for the simultaneous identification of a contaminant source and the spatial distribution of hydraulic conductivity while using the r-EnKF as a benchmark. The outcome shows that the ES-MDA is able to outperform the r-EnKF, marginally, for the specific synthetic case analyzed with almost the same CPU consumption, and it can perform far better than the r-EnKF just with a cost of larger CPU usage. The forth and last part investigates the performance of the ES-MDA in a time-varying release history identification problem. The influence of different observation intervals and inflation factor schemes on the determination of the release curve are discussed. The outcome shows that the ES-MDA performs great in recovering release history when the history curve is discretized in not too many steps, and that it fails when the discretization is large. The frequency at which observation data are sampled is an influential factor in this application, while the number of iterations or the inflation scheme have less effect., Thanks to the institutions that financed my studies. The support to carry out my work was received from the Spanish Ministry of Economy and Competitiveness through project CGL2014-59841-P, and from the Spanish Ministry of Education, Culture and Sports through a fellowship for the mobility of professors in foreign research and higher education institutions to my supervisor, reference PRX17/00150
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Setting decision thresholds when operating conditions are uncertain

  • Ferri Ramírez, César|||0000-0002-8975-1120
  • Hernández-Orallo, José|||0000-0001-9746-7632
  • Flach, Peter
[EN] The quality of the decisions made by a machine learning model depends on the data and the operating conditions during deployment. Often, operating conditions such as class distribution and misclassification costs have changed during the time since the model was trained and evaluated. When deploying a binary classifier that outputs scores, once we know the new class distribution and the new cost ratio between false positives and false negatives, there are several methods in the literature to help us choose an appropriate threshold for the classifier's scores. However, on many occasions, the information that we have about this operating condition is uncertain. Previous work has considered ranges or distributions of operating conditions during deployment, with expected costs being calculated for ranges or intervals, but still the decision for each point is made as if the operating condition were certain. The implications of this assumption have received limited attention: a threshold choice that is best suited without uncertainty may be suboptimal under uncertainty. In this paper we analyse the effect of operating condition uncertainty on the expected loss for different threshold choice methods, both theoretically and experimentally. We model uncertainty as a second conditional distribution over the actual operation condition and study it theoretically in such a way that minimum and maximum uncertainty are both seen as special cases of this general formulation. This is complemented by a thorough experimental analysis investigating how different learning algorithms behave for a range of datasets according to the threshold choice method and the uncertainty level., We thank the anonymous reviewers for their comments, which have helped to improve this paper significantly. This work has been partially supported by the EU (FEDER) and the Spanish MINECO under Grant TIN 2015-69175-C4-1-R and by Generalitat Valenciana under Grant PROMETEOII/2015/013. Jose Hernandez-Orallo was supported by a Salvador de Madariaga Grant (PRX17/00467) from the Spanish MECD for a research stay at the Leverhulme Centre for the Future of Intelligence (CFI), Cambridge, a BEST Grant (BEST/2017/045) from Generalitat Valenciana for another research stay also at the CFI and an FLI Grant RFP2-152.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Contaminant source and aquifer characterization: An application of ES-MDA demonstrating the assimilation of geophysical data

  • Chen, Zi
  • Zong, Leli
  • Xu, Teng
  • Jiang, Yuehua
  • Zhou, Quanping
  • Yang, Hai
  • Jia, Zhengyang
  • Mei, Shijia
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
[EN] Contaminant source and aquifer characterization (CSAC) is critical in groundwater pollution evaluation and remediation. The ensemble smoother with multiple data assimilation (ES-MDA) is utilized to jointly identify contaminant source information and hydraulic conductivities by assimilating time-lapse electrical resistivity tomography (ERT) data. In a synthetic profile with a time-varying release history in a heterogeneous aquifer, we verify the performance of the proposed data assimilation framework. The results show that the CSAC problem could be handled by the proposed approach. The time-varying release history and the high permeability area can be identified with adequate time-lapse ERT measurements. Further reproduction of the evolution of the plume after CSAC also shows consistency with the reference plume. The poor conditioning inversion caused by the filter inbreeding is analyzed by comparing four scenarios with different apparent resistivity measurements. Furthermore, we also evaluate the impact of uncertainties in the petrophysical properties and geophysical observations on our data assimilation framework. The results show that the proposed ES-MDA data assimilation framework could provide a convincing inversion of the time-varying release history and hydraulic conductivities., Financial support to carry out this work was received from grants PID2019-109131RB-I00 and PRX17/00150 funded by MCIN/AEI/10.13039/501100011033, grant DD20190260 and DD20221728 funded by China Geological Survey and grant 2022YFC3705001 funded by National Key R & D Plan. Teng Xu acknowledges the National Natural Science Foundation of China (42377046 and 523024911). The authors acknowledge Graham Sander, Associate Editor and three anonymous Reviewers for their thoughtful and constructive comments.
IRTA Pubpro. Open Digital Archive
Publication Artículo científico (JournalArticle)

Whole rumen metagenome sequencing allows classifying and predicting feed efficiency and intake levels in cattle

  • Delgado, Beatriz
  • Bach, Alex
  • Guasch, Isabel
  • González, Carmen
  • Elcoso, Guillermo
  • Pryce, Jennie E.
  • Gonzalez-Recio, Oscar
The current research was carried out to determine the associations between the rumen microbiota and traits related with feed efficiency in a Holstein cattle population (n = 30) using whole metagenome sequencing. Improving feed efficiency (FE) is important for a more sustainable livestock production. The variability for the efficiency of feed utilization in ruminants is partially controlled by the gastrointestinal microbiota. Modulating the microbiota composition can promote a more sustainable and efficient livestock. This study revealed that most efficient cows had larger relative abundance of Bacteroidetes (P = 0.041) and Prevotella (P = 0.003), while lower, but non-significant (P = 0.119), relative abundance of Firmicutes. Methanobacteria (P = 0.004) and Methanobrevibacter (P = 0.003) were also less abundant in the high-efficiency cows. A de novo metagenome assembly was carried out using de Bruijn graphs in MEGAHIT resulting in 496,375 contigs. An agnostic pre-selection of microbial contigs allowed high classification accuracy for FE and intake levels using hierarchical classification. These microbial contigs were also able to predict FE and intake levels with accuracy of 0.19 and 0.39, respectively, in an independent population (n = 31). Nonetheless, a larger potential accuracy up to 0.69 was foreseen in this study for datasets that allowed a larger statistical power. Enrichment analyses showed that genes within these contigs were mainly involved in fatty acids and cellulose degradation pathways. The findings indicated that there are differences between the microbiota compositions of high and low-efficiency animals both at the taxonomical and gene levels. These differences are even more evident in terms of intake levels. Some of these differences remain even between populations under different diets and environments, and can provide information on the feed utilization performance without information on the individual intake level., info:eu-repo/semantics/publishedVersion
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Laser texturing of stainless steel under different processing atmospheres: from superhydrophilic to superhydrophobic surfaces

  • Pou Álvarez, Pablo
  • Del Val Garcia, Jesús
  • Riveiro Rodríguez, Antonio
  • Comesaña Piñeiro, Rafael
  • Arias González, Felipe
  • Lusquiños Rodríguez, Fernando
  • Boutinguiza Larosi, Mohamed
  • Quintero Martínez, Félix
  • Pou Saracho, Juan María
Wettability plays a major role in a variety of surface related phenomena, as corrosion, heat transfer or tissue adhesion on implants. Consequently, great research effort is being devoted to control the wetting degree of functional surfaces. Pulsed laser texturing at micro/nanometric level has been widely used for that purpose as a precision/time efficient technique. This work studies the role of the processing atmosphere in controlling the wettability of commercial AISI 304 by laser texturing. A pulsed laser source (λ = 532 nm) working at the nanosecond regime was employed and five different atmospheres were tested (i.e. O 2 , Air, CO 2 , N 2 , Ar). The results show clear differences in the wetting behaviour depending solely on the processing environment, ranging from hydrophilicity (31°) to hydrophobicity (125°). Those differences in wettability were found to be a consequence of changes in surface chemistry between samples processed under the various gases. The laser processing parameters showed a capability to tune the final wetting behaviour by controlling the topography and modulating the chemical composition given by the processing environment. It is demonstrated how the effects of the atmosphere can be exploited to tailor the wettability of the untreated surfaces (θ = 88°) up to the desired value, ranging from superhydrophilicity (θ = 0°) to superhydrophobicity (θ = 152°)., Xunta de Galicia | Ref. D431B 2016/042, Xunta de Galicia | Ref. ED481D 2017/010, Xunta de Galicia | Ref. ED481B 2016/047-0, Ministerio de Economía y Competitividad | Ref. MAT2015-71459-C2-1-P, Ministerio de Educación, Cultura y Deporte | Ref. FPU16/05492, Ministerio de Educación, Cultura y Deporte | Ref. PRX17/00157, European Comission | Ref. EAPA_151/2016 Interreg Atlantic Area
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

RE-irradiation of silver nanoparticles obtained by laser ablation in water and assessment of their antibacterial effect

  • Fernández Arias, Mónica
  • Boutinguiza Larosi, Mohamed
  • Del Val Garcia, Jesús
  • Medina, E
  • Muñoz Rodríguez, Daniel
  • Riveiro Rodríguez, Antonio
  • Comesaña Piñeiro, Rafael
  • Lusquiños Rodríguez, Fernando
  • Gil, F. J
  • Pou Saracho, Juan María
The rapid evolution of resistant bacteria is a huge problem in medicine because makes the treatment of infections more and more difficult. The bactericidal properties of noble metal nanoparticles could be a solution. In this work silver nanoparticles were produced by using two nanosecond Nd:YVO 4 lasers operating at 1064 and 532 nm respectively to ablate a silver target submerged in pure de-ionized water. Part of the resulting colloidal solution was injected as a fine stream by a compressed air system and re-irradiated one and three times with the same laser to resize and get uniform nanoparticles. The obtained nanoparticles by ablation and re-irradiation consisted of crystalline Ag nanoparticles with a bimodal size distribution. The particle size has been reduced by subsequent laser re-irradiation with both laser sources, reaching a 40% of mean size reduction. Inhibitory effects on the proliferation of Staphylococcus aureus was demonstrated on silver nanoparticles obtained after re-irradiation with the infrared laser., Xunta de Galicia | Ref. ED481D 2017/010, Xunta de Galicia | Ref. ED481B 2016/047-0, Xunta de Galicia | Ref. ED431B 2016/042, Ministerio de Economía y Competitividad | Ref. MAT2015-71459-C2-2-P, Ministerio de Economía y Competitividad | Ref. MAT2015-71459-C2-1-P, Ministerio de Educación, Cultura y Deporte | Ref. PRX17/00157
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Multitechnical approach for damage assessment and reinforcement of buildings located on subsiding areas: Study case of a 7-story RC building in Murcia (SE Spain)

  • Díaz Castañeda, Esteban
  • Robles Marín, Pedro
  • Tomás, Roberto
  • Díaz Castañeda, Esteban|||/items/74c6c9e7-e9d0-4fec-b740-4b57680cb6e0
  • Robles Marín, Pedro|||/items/4446ed83-11b7-4b76-88ba-ac9ae4935426
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
The work presented herein proposes a multitechnical methodology for damage assessment and reinforcement of buildings located on areas affected by land subsidence induced by water withdrawal. The proposed methodology is illustrated by a comprehensive damage assessment and subsequent reinforcement of a 7-story reinforced concrete building located in the city of Murcia (SE Spain). Construction took place in the 1980s and the building was severely damaged by differential settlements caused by land subsidence throughout time. The building suffered an important tilting, presenting maximum settlement of 260 mm and a maximum horizontal displacement at the top of the building of 177 mm, which considerably reduced its habitability and security conditions. Damage began to manifest in 1995, coinciding with an intense drought that affected the Murcia area between 1991 and 1995. Average piezometric level decreases of at least 8 m were verified, reaching 10 m in the nearby areas of the building. These piezometric level decreases caused important consolidation settlements that seriously damaged the structure of the building. The proposed multitechnical damage assessment methodology was used to characterize the causes of damage, design reinforcement actions, and carry out subsequent monitoring to guarantee the structural stability of the building.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Multisource data integration to investigate one century of evolution for the Agnone landslide (Molise, southern Italy)

  • Del Soldato, Matteo
  • Riquelme, Adrián
  • Bianchini, Silvia
  • Tomás, Roberto
  • Di Martire, Diego
  • De Vita, Pantaleone
  • Moretti, Sandro
  • Calcaterra, Domenico
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Landslides are one of the most relevant geohazards worldwide, causing direct and indirect costs and fatalities. Italy is one of the countries most affected by mass movements, and the Molise region, southern Italy, is known to be susceptible to erosional processes and landslides. In January 2003, a landslide in the municipality of Agnone, in the Colle Lapponi-Piano Ovetta (CL-PO) territory, occurred causing substantial damage to both structures and civil infrastructure. To investigate the evolution of the landslide-affected catchment over approximately one century, different data were taken into account: (i) literature information at the beginning of the twentieth century; (ii) historical sets of aerial optical photographs to analyse the geomorphological evolution from 1945 to 2003; (iii) SAR (Synthetic Aperture Radar) data from the ERS1/2, ENVISAT and COSMO-SkyMed satellites to monitor the displacement from 1992 to 2015; (iv) traditional measurements carried out through geological and geomorphological surveys, inclinometers and GPS campaigns to characterize the geological setting of the area; and (v) recent optical photographs of the catchment area to determine the enlargement of the landslide. Using the structure from motion technique, a 3D reconstruction of each set of historical aerial photographs was made to investigate the geomorphological evolution and to trace the boundary of the mass movements. As a result, the combination of multitemporal and multitechnique analysis of the evolution of the CL-PO landslide enabled an assessment of the landslide expansion, which resulted in a maximum length of up to approximately 1500 m. A complete investigation of the past and present deformational sequences of the area was performed to potentially plan further mitigation and prevention strategies to avoid possible reactivations.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Digital landform reconstruction using old and recent open access digital aerial photos

  • Riquelme, Adrián
  • Del Soldato, Matteo
  • Tomás, Roberto
  • Cano, Miguel
  • Jordá Bordehore, Luis
  • Moretti, Sandro
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Technological progress in remote sensing has enabled digital representation of terrain through new techniques (e.g. digital photogrammetry) and instruments (e.g. 3D laser scanners). However, the use of old aerial images remains important in geosciences to reconstruct past landforms and detect long-term topographic changes. Administrations have recently expressed growing interest in sharing photogrammetric datasets on public repositories, providing opportunities to exploit these resources and detect natural and anthropogenic topographic changes. The SfM-MVS photogrammetric technique was applied to scanned historical black and white aerial photos of the Serra de Fontcalent (Alicante, Spain), as well as to recent high-quality digital aerial photos. Ground control points (GCPs) extracted from a LiDAR-derived three-dimensional point cloud were used to georeference the results with non-linear deformations. Two point clouds obtained with SfM-MVS were compared with the LiDAR-derived reference point cloud. Based on the result, the quality of the models was analysed through the comparison of the stages on stable areas, i.e., lands where no variations were detected, and active areas, with quarries, new infrastructures, fillings, excavations or new buildings. This study also indicates that errors are higher for old aerial photos (up to 5 m on average) than recent digital photos (up to 0.5 m). The application of SfM-MVS to open access data generated 3D models that enhance the geomorphological analysis, compared to stereophotogrammetry, and effectively detected activities in quarries and building of landfills.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Assessment of landslide-induced damage to structures: the Agnone landslide case study (southern Italy)

  • Del Soldato, Matteo
  • Di Martire, Diego
  • Bianchini, Silvia
  • Tomás, Roberto
  • De Vita, Pantaleone
  • Ramondini, Massimo
  • Casagli, Nicola
  • Calcaterra, Domenico
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Landslides are among the most important and frequent natural calamities that cause severe socio-economic and human losses. After earthquakes, landslides are responsible for the greatest number of casualties and the largest amount of damage to man-made structures. On average, southern Italy is affected by a high spatial density of landslides due to its complex geological setting, which often predisposes it to slope instability phenomena under both natural and anthropogenic influences. Structurally complex formations are widespread in the southern Apennines and are characterized by high heterogeneity and very poor mechanical properties. Thus, these formations represent one of the main factors contributing to the predisposition of slopes to landsliding. In this paper, landslide-induced damage was investigated and analyzed in an area within the municipality of Agnone (Molise region), which is affected by a complex landslide that involves a structurally complex formation. The approaches used were based on six different methods that have previously been described in the literature, and a comparison of the results was made. Data regarding the damage, which consists largely of cracks observed in buildings and at the ground, were compiled through field surveys. The results were critically analyzed to note the advantages and constraints of each classification scheme. The aim of the work was to apply and compare different approaches in order to test the best and most accurate procedures for assessing damage due to landslides at the scale of individual buildings as well as to provide an objective assessment of the degree of landslide damage to structures and facilities.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Automatic Mapping of Discontinuity Persistence on Rock Masses Using 3D Point Clouds

  • Riquelme, Adrián
  • Tomás, Roberto
  • Cano, Miguel
  • Pastor Navarro, José Luis
  • Abellán Fernández, Antonio
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Finding new ways to quantify discontinuity persistence values in rock masses in an automatic or semi-automatic manner is a considerable challenge, as an alternative to the use of traditional methods based on measuring patches or traces with tapes. Remote sensing techniques potentially provide new ways of analysing visible data from the rock mass. This work presents a methodology for the automatic mapping of discontinuity persistence on rock masses, using 3D point clouds. The method proposed herein starts by clustering points that belong to patches of a given discontinuity. Coplanar clusters are then merged into a single group of points. Persistence is measured in the directions of the dip and strike for each coplanar set of points, resulting in the extraction of the length of the maximum chord and the area of the convex hull. The proposed approach is implemented in a graphic interface with open source software. Three case studies are utilized to illustrate the methodology: (1) small-scale laboratory setup consisting of a regular distribution of cubes with similar dimensions, (2) more complex geometry consisting of a real rock mass surface in an excavated cavern and (3) slope with persistent sub-vertical discontinuities. Results presented good agreement with field measurements, validating the methodology. Complexities and difficulties related to the method (e.g., natural discontinuity waviness) are reported and discussed. An assessment on the applicability of the method to the 3D point cloud is also presented. Utilization of remote sensing data for a more objective characterization of the persistence of planar discontinuities affecting rock masses is highlighted herein.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Use of artificial neural networks to predict 3-D elastic settlement of foundations on soils with inclined bedrock

  • Díaz Castañeda, Esteban
  • Brotons, Vicente
  • Tomás, Roberto
  • Díaz Castañeda, Esteban|||/items/74c6c9e7-e9d0-4fec-b740-4b57680cb6e0
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
The application of the theory of elasticity for the calculation of foundation settlements has yielded equations that are well-established and consolidated in geotechnical standards and/or that are recommended for use. These equations are corrected by an influence factor in order to increase their precision and to encompass the existing complex geotechnical casuistry. The study presented herein utilizes neural networks to improve the determination of the influence factor (Iα), which considers the effect of a finite elastic half-space limited by the inclined bedrock under a foundation. The results obtained through the utilization of artificial neural networks (ANNs) demonstrate a notable improvement in the predicted values for the influence factor in comparison with those of existing analytical equations.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

X-ray variability of the HMXB Cen X−3: evidence for inhomogeneous accretion flows

  • Sanjurjo-Ferrín, Graciela
  • Torrejon, Jose M.
  • Postnov, Konstantin
  • Oskinova, Lidia M.
  • Rodes Roca, José Joaquín
  • Bernabeu, Guillermo
  • Rodes Roca, José Joaquín|||/items/9005a2de-e9e4-401b-8862-5235312280d9
  • Sanjurjo-Ferrín, Graciela|||/items/5e907caa-fc3f-4ed3-8d92-9c8803b8331b
  • Torrejon, Jose M.|||/items/b8a40e83-6016-4fd5-94f9-feefe05bc06a
Cen X−3 is a compact high-mass X-ray binary likely powered by Roche lobe overflow. We present a phase-resolved X-ray spectral and timing analysis of two pointed XMM–Newton observations. The first one took place during a normal state of the source, when it has a luminosity LX ∼ 1036 erg s−1. This observation covered orbital phases ϕ = 0.00–0.37, i.e. the egress from the eclipse. The egress light curve is highly structured, showing distinctive intervals. We argue that different intervals correspond to the emergence of different emitting structures. The light-curve analysis enables us to estimate the size of such structures around the compact star, the most conspicuous of which has a size ∼0.3R*, of the order of the Roche lobe radius. During the egress, the equivalent width of Fe emission lines, from highly ionized species, decreases as the X-ray continuum grows. On the other hand, the equivalent width of the Fe K α line, from near-neutral Fe, strengthens. This line is likely formed due to the X-ray illumination of the accretion stream. The second observation was taken when the source was 10 times X-ray brighter and covered the orbital phases ϕ = 0.36–0.80. The X-ray light curve in the high state shows dips. These dips are not caused by absorption but can be due to instabilities in the accretion stream. The typical dip duration, of about 1000 s, is much longer than the time-scale attributed to the accretion of the clumpy stellar wind of the massive donor star, but is similar to the viscous time-scale at the inner radius of the accretion disc.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Evidence of Compton cooling during an X-ray flare supports a neutron star nature of the compact object in 4U1700−37

  • Martinez-Chicharro, Maria
  • Torrejon, Jose M.
  • Oskinova, Lidia M.
  • Fürst, Felix
  • Postnov, Konstantin
  • Rodes Roca, José Joaquín
  • Hainich, Rainer
  • Bodaghee, Arash
  • Rodes Roca, José Joaquín|||/items/9005a2de-e9e4-401b-8862-5235312280d9
  • Torrejon, Jose M.|||/items/b8a40e83-6016-4fd5-94f9-feefe05bc06a
Based on new Chandra X-ray telescope data, we present empirical evidence of plasma Compton cooling during a flare in the non-pulsating massive X-ray binary 4U1700−37. This behaviour might be explained by quasi-spherical accretion on to a slowly rotating magnetized neutron star (NS). In quiescence, the NS in 4U1700−37 is surrounded by a hot radiatively cooling shell. Its presence is supported by the detection of mHz quasi-periodic oscillations likely produced by its convection cells. The high plasma temperature and the relatively low X-ray luminosity observed during the quiescence, point to a small emitting area ∼1 km, compatible with a hotspot on an NS surface. The sudden transition from a radiative to a significantly more efficient Compton cooling regime triggers an episode of enhanced accretion resulting in a flare. During the flare, the plasma temperature drops quickly. The predicted luminosity for such transitions, ∼3 × 1035 erg s−1, is very close to the luminosity of 4U1700−37 during quiescence. The transition may be caused by the accretion of a clump in the stellar wind of the donor star. Thus, a magnetized NS nature of the compact object is strongly favoured.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Land subsidence in Beijing and its relationship with geological faults revealed by Sentinel-1 InSAR observations

  • Hu, Leyin
  • Dai, Keren
  • Xing, Chengqi
  • Li, Zhenhong
  • Tomás, Roberto
  • Clark, Beth
  • Shi, Xianlin
  • Chen, Mi
  • Zhang, Rui
  • Qiu, Qiang
  • Lu, Yajun
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Beijing, the capital city of China, has been affected by land subsidence due to intensive groundwater extraction since 1935. Recent studies reported that the maximum subsidence occurred in the east of Beijing, reaching more than 11 cm/year till 2017. To investigate the subsidence (2015˜2017) in Beijing, in this paper, time series interferometric synthetic aperture radar (TS-InSAR) analysis was performed with 22 Sentinel-1 Terrain Observation by Progressive Scans (TOPS) mode SAR data. Results show that wide areas in the east of Beijing are subsiding with a maximum rate of 14 cm/year, which is consistent with GPS data. Detailed analysis of the obtained subsidence map reveals the existence of several characteristic near-linear boundaries within the subsiding areas. As a result of our previous three-year project, we generated the exact location, direction, and late Quaternary activity of the main potential active faults in the Beijing area. The relationship between the trace of these existing geological faults and the mentioned subsidence boundaries was investigated in detail. It is suggested that land subsidence in Beijing was mainly caused by the over-extraction of groundwater, with its spatial pattern being controlled by geological faults.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Post-disaster assessment of 2017 catastrophic Xinmo landslide (China) by spaceborne SAR interferometry

  • Dai, Keren
  • Xu, Qiang
  • Li, Zhenhong
  • Tomás, Roberto
  • Fan, Xuanmei
  • Dong, Xiujun
  • Li, Weile
  • Zhou, Zhiwei
  • Gou, Jisong
  • Ran, Peilian
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Timely and effective post-disaster assessment is of significance for the design of rescue plan, taking disaster mitigation measures and disaster analysis. Field investigation and remote sensing methods are the common ways to perform post-disaster assessment, which are usually limited by dense cloud coverage, potential risk, and tough transportation etc. in the mountainous area. In this paper, we employ the 2017 catastrophic Xinmo landslide (Sichuan, China) to demonstrate the feasibility of using spaceborne synthetic aperture radar (SAR) data to perform timely and effective post-disaster assessment. With C-band Sentinel-1 data, we propose to combine interferometric coherence to recognize the stable area, which helps us successfully identify landslide source area and boundaries in a space-based remote sensing way. Complementarily, X-band TanDEM-X SAR data allow us to generate a precise pre-failure high-resolution digital elevation model (DEM), which provides us the ability to accurately estimate the depletion volume and accumulation volume of Xinmo landslide. The results prove that spaceborne SAR can provide a quick, valuable, and unique assistance for post-disaster assessment of landslides from a space remote sensing way. At some conditions (bad weather, clouds, etc.), it can provide reliable alternative.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photoreduction of gaseous oxidized mercury changes global atmospheric mercury speciation, transport and deposition

  • Saiz-Lopez, A.
  • Sitkiewicz, S.P.
  • Roca-Sanjuán, Daniel
  • Oliva, José M.
  • Dávalos, J.Z.
  • Notario, Rafael
  • Jiskra, M.
  • Xu, Yang
  • Wang, Feiyue
  • Thackray, C.P.
  • Sunderland, Elsie M.
  • Jacob, Daniel J.
  • Travnikov, O.
  • Cuevas, Carlos A.
  • Acuña, A. Ulises
  • Rivero, Daniel
  • Plane, John M.C.
  • Kinnison, Douglas E.
  • Sonke, Jeroen E.
9 pags, 8 figs. -- Correction autor: https://doi.org/10.1038/s41467-022-28455-w http://hdl.handle.net/10261/268181, Anthropogenic mercury (Hg(0)) emissions oxidize to gaseous Hg(II) compounds, before deposition to Earth surface ecosystems. Atmospheric reduction of Hg(II) competes with deposition, thereby modifying the magnitude and pattern of Hg deposition. Global Hg models have postulated that Hg(II) reduction in the atmosphere occurs through aqueous-phase photoreduction that may take place in clouds. Here we report that experimental rainfall Hg(II) photoreduction rates are much slower than modelled rates. We compute absorption cross sections of Hg(II) compounds and show that fast gas-phase Hg(II) photolysis can dominate atmospheric mercury reduction and lead to a substantial increase in the modelled, global atmospheric Hg lifetime by a factor two. Models with Hg(II) photolysis show enhanced Hg(0) deposition to land, which may prolong recovery of aquatic ecosystems long after Hg emissions are lowered, due to the longer residence time of Hg in soils compared with the ocean. Fast Hg(II) photolysis substantially changes atmospheric Hg dynamics and requires further assessment at regional and local scales., This work was supported by the Consejo Superior de Investigaciones Científicas (CSIC) Spain. The National Center for Atmospheric Research (NCAR) is funded by the National Science Foundation (NSF). Computing resources were provided by the Climate Simulation Laboratory at NCAR’s Computational and Information Systems Laboratory (CISL), sponsored by the NSF, provided computing resources. The CESM project (which includes CAM-Chem) is supported by the NSF and the office of Science (BER) of the US Department of Energy. This study has received funding from the European Research Council Executive Agency under the European Union´s Horizon 2020 Research and innovation programme (Projects ‘ERC-2016-COG 726349 CLIMAHAL’ to A.S.L. and ERC-2010-STG 258537’ to J.E.S.), and from H2020 ERA-PLANET 689443. S.P.S. acknowledges the Basque Government for funding through a PhD fellowship (PRE 2017 1 0403). D.R.S. is thankful to the Spanish Ministerio de Economía y Competitividad (MINECO) (Projects CTQ2017-87054-C2-2-P, RYC-2015-19234 grant, and Unit of Excellence María de Maeztu MDM-2015-0538). J.M.O-E. is grateful to program “Salvador de Madariaga” Project No. PRX17/00488 (Ministerio de Educación, Cultura y Deporte). We thank the UMS 831 Pic du Midi Observatory team for help with rainwater sampling and Franck Gilbert for use of the solar simulator.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optimization of Li4SiO4 synthesis conditions by a solid state method for maximum CO2 capture at high temperature

  • Izquierdo, M.T.
  • Turan, A.
  • García, S.
  • Maroto-Valer, M.M.
The aim of this research work is to optimize the synthesis of Li4SiO4 by a solid state method to maximize CO2 capture. This includes evaluating the main characteristics of the synthesised material which enhance the CO2 uptake performance. Starting from Li2CO3 and SiO2 pure reagents, the effect of the sintering process conditions (heating rate, synthesis temperature and holding time) of the previously mixed powders has been studied. The samples were characterized by N2 physisorption, particle size distribution and X-ray diffraction. The evaluation of the CO2 uptake performance of the samples has been carried out at 600 °C using a thermobalance under a flow of almost pure CO2. Unreacted Li2CO3 is present at low synthesis temperatures, and its content in the synthesised material decreases when higher temperatures are used, so complete conversion to Li4SiO4 is reached at 900 °C. At this temperature, the maximum CO2 uptake was found to be 20%, although it was yet far from the stoichiometric CO2 uptake value of 36.7%. The holding time at a synthesis temperature of 900 °C was then varied and a maximum CO2 uptake of 30.5% was obtained for a holding time of 2 h. Finally, under the optimised synthesis temperature and holding time conditions, the heating rate was varied. A value of 5 °C min-1 was found as the optimum one as the use of either lower or higher heating rates has a negative effect on the CO2 uptake performance. As crystalline phases, the particle size and BET surface area were very similar among all the prepared samples at 900 °C; the crystal size was identified as the main physical property that could explain the CO2 uptake performance of the samples, i.e., the lower the crystal size, the higher the CO2 uptake.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

CFD-based comparison study of a new flow diverting stent and commercially-available ones for the treatment of cerebral aneurysms

  • Catalán-Echeverría, B.
  • Kelly, M.E.
  • Peeling, L.
  • Bergstrom, D.
  • Chen, X.
  • Malvè, M.
Flow-diverting stents (FDSs) show considerable promise for the treatment of cerebral aneurysms by diverting blood flow away from the aneurysmal sacs, however, post-treatment complications such as failure of occlusion and subarachnoid haemorrhaging remain and vary with the FDS used. Based on computational fluid dynamics (CFD), this study aimed to investigate the performance of a new biodegradable stent as compared to two metallic commercially available FDSs. CFD models were developed for an idealized cerebral artery with a sidewall aneurysmal sac treated by deploying the aforementioned stents of different porosities (90, 80, and 70%) respectively. By using these models, the simulation and analysis were performed, with a focus on comparing the local hemodynamics or the blood flow in the stented arteries as compared to the one without the stent deployment. For the comparison, we computed and compared the flow velocity, wall shear stress (WSS) and pressure distributions, as well as the WSS related indices, all of which are of important parameters for studying the occlusion and potential rupture of the aneurysm. Our results illustrate that the WSS decreases within the aneurysmal sac on the treated arteries, which is more significant for the stents with lower porosity or finer mesh. Our results also show that the maximum WSS near the aneurysmal neck increases regardless of the stents used. In addition, the WSS related indices including the time-average WSS, oscillatory shear index and relative residence time show different distributions, depending on the FDSs. Together, we found that the finer mesh stents provide more flow reduction and smaller region characterized by high oscillatory shear index, while the new stent has a higher relative residence time.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The Hemodynamics of Aneurysms Treated with Flow-Diverting Stents Considering both Stent and Aneurysm/Artery Geometries

  • Cillo-Velasco, P.R.
  • Luciano, R.D.
  • Kelly, M.E.
  • Peeling, L.
  • Bergstrom, D.J.
  • Chen, X.B.
  • Malve, M.
Flow diverting stents are deployed to reduce the blood flow into the aneurysm, which would thereby induce thrombosis in the aneurysm sac; the stents prevent its rupture. The present study aimed to examine and quantify the impacts of different flow stents on idealized configurations of the cerebral artery. In our study, we considered a spherical sidewall aneurysm located on curved and tortuous idealized artery vessels and three stents with different porosities (70, 80 and 90%) for deployment. Using computational fluid dynamics, the local hemodynamics in the presence and absence of the stents were simulated, respectively, under the assumption that the blood flow was unsteady and non-Newtonian. The hemodynamic parameters, such as the intra-aneurysmal flow, velocity field and wall shear stress and its related indices, were examined and compared among the 12 cases simulated. The results illustrated that with the stent deployment, the intra-aneurysmal flow and the wall shear stress and its related indices were considerably modified depending on both stent and aneurysm/artery geometries, and that the intra-aneurysmal relative residence time increased rapidly with decreasing stent porosity in all the vessel configurations. These results also inform the rationale for selecting stents for treating aneurysms of different configurations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Government intervention in European mergers and acquisitions

  • Alcalde, Nuria
  • Powell, Ronan
The increasing globalization of economies has leveraged protectionist attitudes in different countries during the last decades. In the context of cross-border mergers and acquisitions (M&A), national governments have intervened to “protect” big domestic firms and their industries from foreign bidders. Despite the potential for severe implications of these actions on the internationalization of firms and development of markets, the research in this area is relatively scarce, and we still know very little about the real causes and consequences of government intervention. In this paper, we study government opposition to cross-border European M&A during the period 1997–2017, an era of important changes in Europe. Using an event study methodology, we examine abnormal returns for targets and their rivals in the time period prior to actual intervention to gauge if investors perceive intervened deals as harmful events for the industry, which could justify government intervention. We use a hand collected sample of 1,574 EU15 rival firms for 48 mergers, of which 18 experience government intervention. Entropy balanced regression models show that rivals of intervened targets earn significantly lower returns relative to rivals of non-intervened targets on deal announcement. Nevertheless, rivals’ abnormal returns are not negative, suggesting that intervened deals are not perceived ex ante as harmful for industry competitiveness. The results are more consistent with investors’ ability to identify likely blocked deals, which puts downward pressure on abnormal returns to both the target companies and their rivals. These findings indicate that government interventions against foreign bidders seem to have an economic cost in the sector that is anticipated by the investors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Dating lightning: Dendrochronological and magnetic analyses of lightning scars

  • Camarero, J. Julio
  • Pueyo, Emilio L.
  • Sánchez-Moreno, Elisa
  • Calvin, Pablo
Lightning impacts on forests and trees are still understudied from a tree-ring perspective. Lighting causes direct and indirect damages on forests and trees. Trees struck by lightning can show a growth reduction and lightning storms also trigger wildfires in seasonally dry areas such as Mediterranean mountains. Here we combined dendroecological and magnetic analyses to reconstruct and assess the impact of lightning on radial growth and the magnetic properties of wood in Scots pine (Pinus sylvestris) and Black pine (Pinus nigra) in two sites with a high density of lightning impacts located in eastern Spain. We dated several lightning scars, particularly in Scots pine, formed during 1982, when a wildfire was initiated by lightning during a dry summer storm. Growth was reduced during the year when the scar was formed in both pine species, albeit this effect could be masked or amplified by other disturbances (drought, outbreaks). However, despite that short-term growth reduction scarred trees showed higher growth rates than non-scarred trees in the case of Scots pine. The intensity of magnetization did not significantly differ in wood produced before and after the lightning scar was formed. This could be due to multiple lightning hits in the same or nearby stands affecting the magnetization of wood. Wood magnetic properties should be further explored as proxies of lightning impacts in sites where scars are not formed and tree-ring information is limited such as tropical forests. Further cross-disciplinary research is required to assess the impacts of lightning on tree growth and magnetism.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Whole rumen metagenome sequencing allows classifying and predicting feed efficiency and intake levels in cattle

  • Delgado, Beatriz
  • Bach, Alex
  • Guasch, Isabel
  • González, Carmen
  • Elcoso, Guillermo
  • Pryce, Jennie E.
  • Gonzalez-Recio, Oscar
The current research was carried out to determine the associations between the rumen microbiota and traits related with feed efficiency in a Holstein cattle population (n = 30) using whole metagenome sequencing. Improving feed efficiency (FE) is important for a more sustainable livestock production. The variability for the efficiency of feed utilization in ruminants is partially controlled by the gastrointestinal microbiota. Modulating the microbiota composition can promote a more sustainable and efficient livestock. This study revealed that most efficient cows had larger relative abundance of Bacteroidetes (P = 0.041) and Prevotella (P = 0.003), while lower, but non-significant (P = 0.119), relative abundance of Firmicutes. Methanobacteria (P = 0.004) and Methanobrevibacter (P = 0.003) were also less abundant in the high-efficiency cows. A de novo metagenome assembly was carried out using de Bruijn graphs in MEGAHIT resulting in 496,375 contigs. An agnostic pre-selection of microbial contigs allowed high classification accuracy for FE and intake levels using hierarchical classification. These microbial contigs were also able to predict FE and intake levels with accuracy of 0.19 and 0.39, respectively, in an independent population (n = 31). Nonetheless, a larger potential accuracy up to 0.69 was foreseen in this study for datasets that allowed a larger statistical power. Enrichment analyses showed that genes within these contigs were mainly involved in fatty acids and cellulose degradation pathways. The findings indicated that there are differences between the microbiota compositions of high and low-efficiency animals both at the taxonomical and gene levels. These differences are even more evident in terms of intake levels. Some of these differences remain even between populations under different diets and environments, and can provide information on the feed utilization performance without information on the individual intake level., info:eu-repo/semantics/publishedVersion
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Cytokine profiling of extracellular vesicles isolated from plasma in myalgic encephalomyelitis/chronic fatigue syndrome, a pilot study

  • Giloteaux, Ludovic
  • O'Neal, Adam
  • Castro-Marrero, Jesús|||0000-0002-2481-3052
  • Levine, Susan M.
  • Hanson, Maureen R.|||0000-0001-8141-3058
Myalgic Encephalomyelitis/Chronic Fatigue Syndrome (ME/CFS) is a debilitating disease of unknown etiology lasting for a minimum of 6 months but usually for many years, with features including fatigue, cognitive impairment, myalgias, post-exertional malaise, and immune system dysfunction. Dysregulation of cytokine signaling could give rise to many of these symptoms. Cytokines are present in both plasma and extracellular vesicles, but little investigation of EVs in ME/CFS has been reported. Therefore, we aimed to characterize the content of extracellular vesicles (EVs) isolated from plasma (including circulating cytokine/chemokine profiling) from individuals with ME/CFS and healthy controls. We included 35 ME/CFS patients and 35 controls matched for age, sex and BMI. EVs were enriched from plasma by using a polymer-based precipitation method and characterized by Nanoparticle Tracking Analysis (NTA), Transmission Electron Microscopy (TEM) and immunoblotting. A 45-plex immunoassay was used to determine cytokine levels in both plasma and isolated EVs from a subset of 19 patients and controls. Linear regression, principal component analysis and inter-cytokine correlations were analyzed. ME/CFS individuals had significantly higher levels of EVs that ranged from 30 to 130 nm in size as compared to controls, but the mean size for total extracellular vesicles did not differ between groups. The enrichment of typical EV markers CD63, CD81, TSG101 and HSP70 was confirmed by Western blot analysis and the morphology assessed by TEM showed a homogeneous population of vesicles in both groups. Comparison of cytokine concentrations in plasma and isolated EVs of cases and controls yielded no significant differences. Cytokine-cytokine correlations in plasma revealed a significant higher number of interactions in ME/CFS cases along with 13 inverse correlations that were mainly driven by the Interferon gamma-induced protein 10 (IP-10), whereas in the plasma of controls, no inverse relationships were found across any of the cytokines. Network analysis in EVs from controls showed 2.5 times more significant inter-cytokine interactions than in the ME/CFS group, and both groups presented a unique negative association. Elevated levels of 30-130 nm EVs were found in plasma from ME/CFS patients and inter-cytokine correlations revealed unusual regulatory relationships among cytokines in the ME/CFS group that were different from the control group in both plasma and EVs. These disturbances in cytokine networks are further evidence of immune dysregulation in ME/CFS
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Achievable data rate of DCT-based multicarrier modulation systems

  • Cruz Roldán, Fernando|||0000-0001-6843-5199
  • Martins, Wallace A.
  • Diniz, Paulo S. R.
  • Moonen, Marc
This paper aims at studying the achievable data rate of discrete cosine transform (DCT)-based multicarrier modulation (MCM) systems. To this end, a general formulation is presented for the full transmission/reception process of data in Type-II even DCT and Type-IV even DCT-based systems. The paper focuses on the use of symmetric extension (SE) and zero padding (ZP) as redundancy methods. Furthermore, three cases related to the channel order and the length of the redundancy are studied. In the first case, the channel order is less than or equal to the length of the redundancy. In the second and third cases, the channel order is greater than the length of the redundancy; the interference caused by the channel impulse response is calculated, and theoretical expressions for their powers are derived. These expressions allow studying the achievable data rate of DCT-based MCM systems, besides enabling the comparison with the conventional MCM based on the discrete Fourier Transform., Ministerio de Economía y Competitividad, Ministerio de Educación, Cultura y Deporte