Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Pilot-plant experimental tests and kinetic model validation of Ru-based catalytic methanation: assessment of operating pressure and filler material on carbon conversion

  • Pascual, S.
  • Barón, C.
  • Katla, D.
  • Skorek-Osikowska, A.
  • Wecel, D.
  • Bailera, M.
  • Legaz, J.
  • Peña, B.
  • Lisbona, P.
The production of synthetic methane is crucial for the energy transition in hard-to-electrify industries. This study assesses the reactor filler (Al2O3 and SiC) and operating pressure (1 and 4 bar) effects on methane performance of a commercial Ru-Al2O3 catalyst. Three catalytic methanation parameters are tested over a wide range: temperatures (200–450 °C), gas hourly space velocities (8000–120,000 h−1), and H2/CO2 molar ratios (3.5–5.5). Experiments are conducted in two pilot plants located at the Universidad de Zaragoza and the Silesian University of Technology. Results demonstrate a high level of reproducibility between the two pilot plants, using Al2O3 filler at 1 bar. Additionally, a kinetic model is validated with experimental measurements, showing an error margin of ±5 % between the model and experimental data. Regarding the effects of operational pressure and reactor filler, the best carbon conversion results are obtained with Al2O3 filler at 4 bar (up to 98 %). For both reactors, a 5 % reduction in carbon conversion is observed at 450 °C for SiC filler. Methane selectivity remains above 99 % in all cases, except for SiC filler at 1 bar (90 %). However, SiC filler shows better thermal diffusion, facilitating operational control.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A comparison of carbon capture and biomass utilisation for decarbonising oxygen blast furnace ironmaking

  • Barón, Cristian
  • Bailera, Manuel
  • Perpiñán, Jorge
  • Peña, Begoña
The Iron and Steel industry stands as a significant industrial source of CO2 emissions, contributing 7% to the global CO2 emissions. Therefore, innovative methods for CO2 removal must be developed in the current path to heavy-industry decarbonization. This work presents and compares two low-carbon brownfield concepts, integrated in an existing steelmaking plant, which incorporates power-to-gas technology, top gas recycling and oxygen blast furnace. The first concept captures carbon via calcium looping and uses it as the source for the methanation plant to produce synthetic natural gas, which is injected in the blast furnace as reducing agent. The second concept is based on charcoal and syngas production through biomass pyrolysis. The former is pulverized and injected into the blast furnace, replacing part of the fossil coke used in the reference steelmaking plant. The latter is used as carbon source in the methanation stage, avoiding the carbon capture stage. Promising results are obtained for the concept which uses biomass as carbon source in the process, achieving a CO2 abatement cost of 64.5 €/tCO2. It is estimated that this cost could be reduced to 55.4 €/tCO2 by scale economy. Despite current economic challenges, the potential mid-term profitability, driven by the ongoing deployment of renewable energy, identifies the utilization of biomass as a solution for environmentally conscious steelmaking.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Techno-economic assessment of the sorption enhanced methanation: Levelized cost of methane, performance indicators and sensitivity analysis

  • Barón, C.
  • Gómez, L.
  • Martínez, I.
  • Bailera, M.
This work presents the first techno-economic assessment of sorption-enhanced methanation (SEM) based on TRL-3 experimental data, comparing it with conventional methanation (CM). Experimental tests fitted a kinetic model for reactor sizing in a 200 MWe plant. While SEM requires more catalyst (223.7 kg/MWe) than CM (70–90 kg/MWe), both systems show similar CAPEX (∼700-800 M€). The results highlight that SEM generates three times higher income due to superior product purity. Conventional methanation often faces economic losses when producing 95% CH4, as levelized costs (LCOM, 2.4 – 3.3 €/kg) exceed market prices (0.5 €/kg). Although CM can be profitable at 99% purity market, SEM achieves 99.9% CH4, accessing a premium market (12 €/kg) that guarantees profitability even in unfavorable hydrogen cost scenarios. Consequently, SEM emerges as a key technology to enhance the economic viability and maturity of innovative H2 production.