Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Investment determinants in self-consumption facilities: characterization and qualitative analysis in Spain

  • Gimeno Alonso, Jose A.
  • Llera Sastresa, Eva María
  • Scarpellini, Sabina
Self-consumption energy facilities are presented as viable and sustainable solutions in the energy transition scenario in which many countries are immersed. However, they rely on dispersed and private investments in the territory. Given the uneven growth in the number of self-consumption facilities in Europe, the main objective of this study is to identify and measure the investment determinants in self-consumption facilities. To this end, the main influential incentives and barriers are identified through the aggregate analysis of the regulatory framework for self-consumption in several European countries, and the empirical characterization of Spanish facilities as a multiple case study, to define the common features of the investments made. The technical, economic, and financial characterization of real self-consumption facilities in climatic zones of southern Europe is a significant contribution of the present work. There are few samples of this type in the studies published to date, which have mainly been prepared from case studies or statistical data without identifying particular facilities. Cost-related variables have been identified as the most important variables in private investment decisions, and potential influential factors on these variables that could be regulated have been pointed out as relevant. It is also worth highlighting the elaboration of an analytical framework based on this conceptual approach, which has been proven to be useful to depict regulatory scenarios and to compare the positioning for the development of self-consumption systems in different countries. A model that transfers the influence of the determining factors to the deployment of self-consumption under specific regulatory scenarios has been developed and applied to the case of Spain. As a general reflection, to increase the adoption of this kind of technology and encourage consumers to make private investments, policies for renewable energy must consider self-consumption and microgeneration as the main axis, by increasing the availability of energy when necessary. For instance, the promotion of energy storage from these kinds of facilities could receive priority treatment, as well as rewarding the electricity surplus in the interests of security of supply in a period of energy transition towards a new, more sustainable model. Incentive schemes, aids to compensate for the additional costs resulting from the battery storage or easing restrictions in terms of contracted power would foreseeably increase the rates of adoption of the technology, favoring its faster development in terms of research and development and product innovation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Well-to-wheels approach for the environmental impact assessment of road freight services

  • Osorio-Tejada, J.L.
  • Llera-Sastresa, E.
  • Hashim, A.H.
The diffuse nature of road transport and the heterogeneity of heavy vehicles have hindered the implementation of emissions accounting systems. Even though there are emission factors in well-known databases, these factors have commonly been designed in industrialized countries, which might have geography, type of roads, and operating conditions different to other countries. This paper proposes a method for the energy consumption and emissions estimation based on vehicle operating conditions in regions with different topology, such as Colombia, Malaysia, and Spain, as case studies. Moreover, the environmental impacts of fuel production in each country are calculated. The diesel consumption on mountainous roads for a full loaded rigid truck in Colombia was 45 L/100 km, compared to averages between 22-26 L/100 km from other sources usually applied. In contrast, the diesel consumption for an articulated truck on a hilly road in Spain from both the proposed method and generic databases coincided in 31 L/100 km. The vehicle speed, load, and road gradient also generated large variations up to 145% in the air pollutants'' estimation. This study contributes to the need for more research about emission factors and tools that facilitate and reduce uncertainty in the environmental accounting in freight companies in different geographies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Renewable energy sources and power-to-gas aided cogeneration for non-residential buildings

  • Bailera, Manuel
  • Lisbona, Pilar
  • Llera, Eva María
  • Peña, Begoña
  • Romeo, Luis Miguel
One promising technology to manage and store renewable electricity from wind or solar sources is Power to Gas (PtG). PtG combines H2 from electrolysis –run by renewable electricity– with CO2 to produce synthetic CH4. A suitable option to get the required CO2 streams is the integration with carbon capture technologies, in particular with oxy-fuel combustion. The application proposed in this study is a cogeneration system that combines PtG, oxyfuel boiler, wind energy and photovoltaic solar production to be applied in buildings. This paper describes the concept and analyses the influence of equipment dimensions varying the relative size and the proportion of the solar-wind installed power for two locations representative of North and South European countries. Results: Show that higher solar and wind powers are required in the Northern region to satisfy coverage of thermal demand. It results in longer time displacement of energy storage towards cold months. Accordingly to the generation patterns of wind and solar energies, higher solar proportion results in longer energy storage periods. Therefore, solar resource is more suitable than wind power to exploit the potential of PtG technology, although the size of the overall systems increases.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Improved Flexibility and Economics of Combined Cycles by Power to Gas

  • Bailera, Manuel
  • Peña, Begoña
  • Lisbona, Pilar
  • Romeo, Luis M.
Massive penetration of renewable energy in the energy systems is required to comply with existing CO2 regulations. Considering current power pools, large shares of renewable energy sources imply strong efficiency and economic penalties in fossil fuel power plants as they are mainly operated to regulate the system and constant shutdowns are expected. Under this framework, the integration of a combined cycle power plant (CCPP) with an energy storage technology such as power to gas (PtG) is proposed to virtually reduce its minimum complaint load through the diversion of instantaneous excess electricity. Power to gas produces hydrogen through water electrolysis, which is later combined with CO2 to produce methane. The main novelty of this study relies in the improved flexibility and economics of combined cycles by means of using power to gas as a tool to reduce the minimum complaint load. The principal objective of the study is the quantification of cost reduction under different scenarios of shutdowns and conventional start-ups. The case study analyses a combined cycle of 400 MWe gross power with a minimum complaint load of 30% that can be virtually reduced to 20% by means of a 40- MWe power-to-gas plant. Eight scenarios are defined to compare the reference case of conventional operation under hot, warm, and cold start-ups with power-to-gas-assisted operation. Additionally, PtG-assisted operation scenarios are analyzed with different loads (30–50–70%). These scenarios also include the consideration of a temporary peak of demand occurring in a period in which dispatch is below the minimum complaint load. Under this situation, the response time of conventional plants is very limited, while PtG-assisted CCPP can rapidly satisfy the peak. The techno-economic model quantifies the required fuel, gross and net power, and emissions as well as total costs and incomes under each scenario and net differential profit in an hourly basis. The analysis of the obtained results does not recommend the operation of the PtG-assisted CCPP at minimum complaint load for hot, warm, or cold start-ups. However, important marginal profits are achieved with the proposed system for part-loads operation over 50% for every sort of start-up, avoiding shutdowns and extending the capacity factor.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Modelling calcium looping at industrial scale for energy storage in concentrating solar power plants

  • Bailera, Manuel
  • Pascual, Sara
  • Lisbona, Pilar
  • Romeo, Luis
Ca-Looping represents one of the most promising technologies for thermochemical energy storage. This process based on the carbonation-calcination cycle of CaO offers a high potential to be coupled with solar power plants for its long-term storage capacity and high temperatures. Previous studies analyzed different configurations of CaL integrated into power cycles aiming to improve efficiency. However, most of these assessments based on lumped models did not account for scale effect in the most critical reactor. In this work, a detailed 1D-model of a large-scale carbonator is included in the comprehensive model of the integrated facility. The results obtained served to assess the available heat, the minimum technical part load of this equipment, the required size of the storage tanks and the overall efficiency of the plant. The main issue in the operation of large-size carbonator is the heat removal, thus a multi-tube internally cooled reactor is proposed. The designed carbonator provides 80 MWth at nominal operation and 40 MWth at minimum part load operation. The sizing of storage tanks depends on the operation management, ranging between 5,700-11,400 m3 for 15 hours. Different efficiencies of the system were defined and presented through operating maps, as a function of the reactor loads.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Calcium looping as chemical energy storage in concentrated solar power plants: Carbonator modelling and configuration assessment

  • Bailera, Manuel
  • Lisbona, Pilar
  • Romeo, Luis M.
  • Díez, Luis I.
This paper addresses the analysis of different configurations of carbonator for thermochemical energy storage for concentrated solar applications. The design of this equipment is different from the previous experience of calcium looping cycle for carbon capture. The use of fluidized beds and large particles are not feasible for this novel application of calcium looping. New reactors and different arrangements for the carbonation process are necessary. The design of a carbonator reactor for a specific Calcium Looping-Concentrated Solar Power application has not been addressed yet in detail in literature. In this work, a comparison of single stage reactor, two parallel reactors and two reactors in series with intercooling are simulated to calculate conversion rates, gas temperatures and flow rates, and heat transfer rates to the external cooling fluid. The modelling encompasses fluid dynamics, lime conversion kinetics and heat transfer, which are solved using a 1-D discrete mesh. The third arrangement results in the most reasonable sizes, and larger conversion rates, avoiding the occurrence of internal reactor zones in which the reaction is inhibited. Energy balance components are also quantified for each configuration.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Comparative Analysis of the Efficiency Penalty in Power Plants of Different Amine-Based Solvents for CO2 Capture

  • Romeo, L.M.
  • Minguell, D.
  • Shirmohammadi, R.
  • Andres, J.M.
Amine solvents are one of the main options for post-combustion CO2 capture applications. The main drawback of the carbon capture processes is the required energy to regenerate the solvent once it has reacted with the CO2. When applied to a power plant, the energy requirement has an important impact on the net efficiency of the overall system. Several solvents, i.e., monoethanolamine (MEA), diethanolamine (DEA), methyl diethanolamine (MDEA), and many others have been proposed to overcome this drawback. Regeneration temperature and heat duty reduction are considered to be the significant objectives. Moreover, enhancement of the amine''s concentration and its working capacity without the impact on the other variables are important. In this work, different types of amines with a wide range of heat duty and regeneration temperatures under the same set of assumptions are calculated and compared. The effect of both variables on the energy penalty caused by carbon capture is measured. A review of amines and their effects on the net efficiency of the overall system (power plant, chemical absorption, CO2 compression) are conducted and analyzed. As expected, the impact of heat duty is greater than the modification of regeneration temperature. The effect of reducing 1 GJ/ton CO2 in the heat duty is similar to the effect of reducing the regeneration temperature from 40 degrees C to 25 degrees C.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Design and operational performance maps of calcium looping thermochemical energy storage for concentrating solar power plants

  • Pascual, Sara
  • Lisbona, Pilar
  • Bailera, Manuel
  • Romeo, Luis
Calcium-looping thermochemical energy storage associated to concentrating solar plants appears as promising technology given its potential to increase the storage period and energy density of the stored material. Up to now, research efforts focused on the global efficiency of the TCES associated to different power cycles under fixed modes of operation: day or night. However, TCES will never operate under a stationary situation but will experience different operation points to adapt to solar availability and energy demand from the power cycle. The aim is to analyse the influence of those variables which define the operation points, under energy storage and release modes, in the design of the heat exchangers network, storage tanks and reactors involved in the TCES system. The equipment in the conceptual plant have been modelled accounting variable storage/discharge fractions in the mass balances. The results show a suitable capture efficiency, quantifies the stored power and define the size and performance of the heat exchangers required to operate the system. The behaviour of each heat exchanger and their relevance in heat integration with a power plant is derived. The novelty relies in the analysis of potential situations arising from different combinations of charge/discharge fractions of storage tanks.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Review on Carbon Capture in ICE Driven Transport

  • García-Mariaca, Alexander
  • Llera-Sastresa, Eva
The transport sector powered by internal combustion engines (ICE) requires novel approaches to achieve near-zero CO2 emissions. In this direction, using CO2 capture and storage (CCS) systems onboard could be a good option. However, CO2 capture in mobile sources is currently challenging due to the operational and space requirements to install a CCS system onboard. This paper presents a systematic review of the CO2 capture in ICE driven transport to know the methods, techniques, and results of the different studies published so far. Subsequently, a case study of a CCS system working in an ICE is presented, where the energy and space needs are evaluated. The review reveals that the most suitable technique for CO2 capture is temperature swing adsorption (TSA). Moreover, the sorbents with better properties for this task are PPN-6-CH2-DETA and MOF-74-Mg. Finally, it shows that it is necessary to supply the energy demand of the CCS system and the option is to take advantage of the waste heat in the flue gas. The case study shows that it is possible to have a carbon capture rate above 68% without affecting engine performance. It was also found that the total volume required by the CCS system and fuel tank is 3.75 times smaller than buses operating with hydrogen fuel cells. According to the review and the case study, it is possible to run a CCS system in the maritime sector and road freight transport.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A review on CO2 mitigation in the Iron and Steel industry through Power to X processes

  • Bailera, Manuel
  • Lisbona, Pilar
  • Peña, Begoña
  • Romeo, Luis M.
In this paper we present the first systematic review of Power to X processes applied to the iron and steel industry. These processes convert renewable electricity into valuable chemicals through an electrolysis stage that produces the final product or a necessary intermediate. We have classified them in five categories (Power to Iron, Power to Hydrogen, Power to Syngas, Power to Methane and Power to Methanol) to compare the results of the different studies published so far, gathering specific energy consumption, electrolysis power capacity, CO2 emissions, and technology readiness level. We also present, for the first time, novel concepts that integrate oxy-fuel ironmaking and Power to Gas. Lastly, we round the review off with a summary of the most important research projects on the topic, including relevant data on the largest pilot facilities (2–6 MW).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Lab-scale experimental tests of Power to Gas-Oxycombustion hybridization: system design and preliminary results

  • Bailera, Manuel
  • Begoña, Peña
  • Lisbona, Pilar
  • Marín, Julián
  • Romeo, Luis M.
Power-to-Gas (PtG) represents one of the most promising energy storage technologies. PtG converts electricity surplus into synthetic natural gas by combining water electrolysis and CO2 methanation. This technology valorises captured CO2 to produce a ‘carbon neutral’ natural gas, while allowing temporal displacement of renewable energy. PtG-Oxycombustion hybridization is proposed to integrate mass and energy flows of the global system. Oxygen, comburent under oxy-fuel combustion, is commonly produced in an air separation unit. This unit can be replaced by an electrolyser which by-produces O2 reducing the electrical consumption and the energy penalty of the carbon separation process. The aim of this work is to present the design, construction and testing of a methanation reactor at laboratory scale to increase the knowledge of the key component of this system. Experimental data are used to validate the theoretical kinetic model at different operating temperatures implemented in Aspen Plus. CO2 conversions about 60-80% are found for catalyst temperature between 350 and 550 ºC. These values agree well with expected theoretical conversions from the kinetic model.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Synthetic natural gas production in a 1 kW reactor using Ni–Ce/Al2O3 and Ru–Ce/Al2O3: Kinetics, catalyst degradation and process design

  • Bailera, M.
  • Lisbona, P.
  • Peña, B.
  • Alarcón, A.
  • Guilera, J.
  • Perpiñán, J.
  • Romeo, L. M.
Nickel and ruthenium promoted by ceria were compared as catalyst active phase for the production of synthetic natural gas in a 1 kW fixed-bed reactor (49 cm in length and 3 cm in diameter). Both catalysts were tested in a broad range of conditions: 250–450 °C, 8000–16000 h−1 GHSV, 3.5–5.5H2/CO2 ratio, and atmospheric pressure. The Ni-based catalyst presented higher CO2 conversion and lower reduction of BET area and metal dispersion after utilization. Two kinetic models were elaborated according to the performance of the catalysts in this reactor. The minimum mean squared error between the kinetic model and experiments was 3.0% for the Ru-based catalyst and 1.4% for the Ni-based catalyst. The kinetic model of the Ni-based catalyst was implemented in Aspen Plus to evaluate potential methanation plant designs. The simulation minimized the amount of catalyst required to reach 95 vol% of CH4, within proper technical limits (GHSV 5000 h−1 and temperature 300 °C). The 3-reactor plant was the most adequate configuration. The total catalyst mass was 3.26 kg per kg/h of SNG, the heat removed from the reactors was 10.8 MJ/kgSNG, and the preheating necessity was 4.90 MJ/kgSNG. The electrolysis energy consumption was 86.4 MJ/kgSNG.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Social Organizational Life Cycle Assessment of Transport Services: Case Studies in Colombia, Spain, and Malaysia

  • Osorio-Tejada, Jose Luis
  • Llera-Sastresa, Eva
  • Scarpellini, Sabina
  • Morales-Pinzón, Tito
Freight operations are relevant for economies but can negatively impact society due to the performance of activities related to fuel production, vehicle manufacturing, and infrastructure construction. This study applies the social organizational life cycle assessment (SO-LCA) methodology to analyze the social performance of companies involved in the supply chain of road transport companies located in different contexts such as Latin American, European, and Asian. The results of the three case studies are compared to analyze the methodology’s robustness and the influence of development and culture on how social performance is perceived. An approach for the SO-LCA, based on the UNEP/SETAC guidelines, was applied to freight companies in Colombia, Spain, and Malaysia. This integrated approach considers the key components of the transport system: fuels, vehicles, and infrastructure. A multi-tier inventory analysis was performed for 26 social impact subcategories, and reference scale assessments were applied to obtain single and aggregated social performance indexes. Interviews with stakeholders were used to aggregate indexes and identify priorities for decision-making in different contexts. First, the stakeholders concurred that freight companies must focus on labor rights to improve their social performance. The second social category in order of importance was human rights, except in the Spanish case study, where it was socioeconomic repercussions. These results indicate that social impact subcategories are influenced by socioeconomic development and the culture or beliefs of its inhabitants. These specificities help identify hotspots and stakeholder concerns toward which transport companies should direct their efforts. This study expands the range of indicators for social impact measurement and the known literature by investigating social matters for different categories of stakeholders spanning three continents. When these indicators are fully developed, their consideration in management practices could benefit business practitioners.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Environmental assessment of road freight transport services beyond the tank-to-wheels analysis based on LCA

  • Osorio Tejada, Jose Luis
  • Llera Sastresa, Eva
  • Scarpellini, Sabina
Reducing environmental impacts in transport motivates many studies to offer more sustainable freight services. However, most methodologies focus on impacts from fuel consumption, and approaches trying to integrate other transport components have not facilitated its application to actual and specific transport services. In this study, we present a harmonized approach to address the transport services with a holistic way to increase the knowledge about hotspots of the transport sector based on the life cycle assessment methodology. In this framework, vehicle manufacturing, fuel production, and infrastructure construction are the key transport components around the traffic process. Besides fuel usage, the operation and maintenance of vehicles and infrastructures are also included. We developed a tool to create the life cycle inventories for each transport component to be applied to specific transport services in any location with a comprehensive view and low uncertainty in the results. This approach was applied to road-freight services in Colombia, Malaysia, and Spain. The main results showed the nature and origin of the environmental impacts, which are highly influenced by the emissions control technologies, road characteristics, and traffic volume. The contribution of atmospheric pollutants per tonne-km can decrease by a quarter when Euro VI trucks on highways instead of conventional trucks on single-lane roads are used. However, these contributions are highly affected by fuel production due to the origin of biofuels. The proposed methodology provides relevant information to estimate transport impacts in the life cycle assessment of products with superior precision and identify strategies for systemically improving sustainability.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Effect of the impurities O2 or NO present in non-purified flue gas from oxy-fuel combustion processes for carbon capture and storage technology

  • Melendo, Ana Pilar
  • Berbés, Roberto
  • Blanco, Sofía T.
  • Fernández, Javier
CO2/impurities cocapture in CCS technology allows reducing the purification costs and avoiding the emission of pollutants into the atmosphere. The viability of the transport by pipeline and the geological storage of the non-purified flue gas from oxy-fuel combustion of biomass and other processes, keeping the impurities O2 or NO in the stream along with CO2, is assessed considering thermodynamic and hydraulic aspects. For this, we experimentally determined, under CCS conditions, the density, vapor-liquid equilibrium, and speed of sound of three CO2 + O2 and CO2 + NO mixtures as binary models of the gas, and we calculated their Joule-Thomson coefficients from the experimental data. Additionally, we compared the values calculated for the determined properties using the equations of state EOS-CG, GERG-2008 and PC-SAFT to our results of CO2 + O2, validating all three equations for this system. For the CO2 + NO mixtures, only PC-SAFT could be applied, which was also validated using the parameters obtained in this work. Finally, we calculated several selected CCS parameters from our data and concluded that both O2 and NO have negative effects on the transport and storage steps of this technology, which are negligible in the case of NO with the investigated concentrations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Development, testing, performance analysis and modelling of a biochar-based catalyst for methanation reaction

  • Peña, Begoña
  • Bailera, Manuel
  • Legaz, Jorge
  • Barón, Cristian
  • Garlatti, Silvia
  • Zampilli, M.
  • Slopiecka, K.L.
  • Guilera, Jordi
  • Martín, Elena
  • Fantozzi, Francesco
  • Romeo, Luis M.
  • Lisbona, Pilar
Hydrogenation of CO2 to produce synthetic methane is a promising alternative to reduce the dependence on fossil fuels of high-temperature industrial processes hard to be electrified, contributing to mitigation of global warming. To reach enough conversion ratios and reasonable reactor sizes, the Sabatier reaction is usually performed via heterogeneous catalysis. Metallic catalysts, as nickel or ruthenium, are the most used supported over mesoporous alumina. The present work proposes and fully investigates for the first time the use of olive kernel biochar obtained from pyrolysis as support of methanation catalyst. The so-obtained biochar, with 530 m2/g specific surface area, is evaluated as a cost-effective and sustainable support. A Ni-based (10 wt%) catalyst was synthesized and tested in a fixed-bed methanation pilot plant. The obtained conversion ratios for gas hourly space velocity of 6000 h−1 were above 60 % for stoichiometric ratio and atmospheric pressure. A kinetic model was developed and validated with experimental measurements, finding discrepancies below 10 % between predictions and experiments. Even though the H2-TPR analyses revealed incomplete nickel reduction during the activation stage, the preliminary results are very promising as the achieved performance figures are similar, even higher, than that obtained in pressurized facilities and/or using Ni-Ce catalysts.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Energy storage using direct iron oxide reduction and energy utilization with high temperature metal combustion

  • Romeo, Luis M.
  • Saez de Guinoa, Javier
  • Jiménez, Santiago
  • Mayoral, Carmen
In response to the growing demand for renewable energy storage solutions, metal fuels have emerged as a promising alternative as recyclable energy carriers. These metals release energy through combustion, forming metal oxides, which can subsequently be regenerated into their metallic state using renewable hydrogen. Recent experimental studies have demonstrated the feasibility of self-sustaining combustion-oxidation of various finely ground metals. For the reduction step, established direct reduction iron (DRI) technology has been successfully used to convert solid iron ore into metallic iron without transitioning to the liquid phase. Through thermodynamic calculations conducted using Aspen, ensuring precise process modelling and efficiency evaluation, this study examines the technical feasibility and preliminary design of an energy storage system that employs iron as a metallic energy carrier. Iron undergoes oxidation and serves as a fuel in high-temperature reactors operating above 1200 °C, thereby releasing its stored energy and forming iron oxide. When hydrogen is available, the iron oxide can be reduced back to metallic iron through the well-established Direct Reduced Iron (DRI) process or a comparable method at approximately 750 °C. A round-trip thermal efficiency of 77.9 % has been calculated for the overall energy storage and utilization process. To further enhance global efficiency, key recommendations include hydrogen recirculation during the reduction process to ensure complete conversion and mitigating the impact of excess air in the oxidation stage.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Viability of the Cocapture of CO2 and Impurities from Oxy-Fuel Combustion and Other Processes in Carbon Capture and Storage Technology

  • Almazán, Héctor
  • Fernández, Javier
  • Blanco, Sofía T.
The feasibility of cocapturing CO2 with SO2, CO, and (O2 or NO) from unpurified flue gas produced by oxy-fuel combustion and other processes was assessed by determining the influence of the simultaneous presence of these impurities on selected carbon capture and storage (CCS) operational parameters. These parameters were calculated based on experimental results obtained under CCS conditions. The density, vapor–liquid equilibrium, and speed of sound of [CO2 + 3.0038 mol % O2 + 0.09035 mol % SO2 + 0.17032 mol % CO] and [CO2 + 0.1410 mol % NO + 0.09100 mol % SO2 + 0.17002 mol % CO] mixtures were experimentally determined at temperatures between 263 and 373 K and pressures of up to 30 MPa for density and 190 MPa for speed of sound. Joule–Thomson coefficients and isentropic compressibilities of the mixtures were calculated from our experimental results. Using experimental and calculated data, we assessed the predictive capability of the EOS-CG, GERG-2008, and PC-SAFT equations of state. The simultaneous presence of the investigated impurities at the studied concentrations adversely affects the transport and storage steps in CCS; however, the behavior of the NO-containing mixture is very similar to that of pure CO2. The implications of the chemical effects of the impurities were overlooked.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Pilot-plant experimental tests and kinetic model validation of Ru-based catalytic methanation: assessment of operating pressure and filler material on carbon conversion

  • Pascual, S.
  • Barón, C.
  • Katla, D.
  • Skorek-Osikowska, A.
  • Wecel, D.
  • Bailera, M.
  • Legaz, J.
  • Peña, B.
  • Lisbona, P.
The production of synthetic methane is crucial for the energy transition in hard-to-electrify industries. This study assesses the reactor filler (Al2O3 and SiC) and operating pressure (1 and 4 bar) effects on methane performance of a commercial Ru-Al2O3 catalyst. Three catalytic methanation parameters are tested over a wide range: temperatures (200–450 °C), gas hourly space velocities (8000–120,000 h−1), and H2/CO2 molar ratios (3.5–5.5). Experiments are conducted in two pilot plants located at the Universidad de Zaragoza and the Silesian University of Technology. Results demonstrate a high level of reproducibility between the two pilot plants, using Al2O3 filler at 1 bar. Additionally, a kinetic model is validated with experimental measurements, showing an error margin of ±5 % between the model and experimental data. Regarding the effects of operational pressure and reactor filler, the best carbon conversion results are obtained with Al2O3 filler at 4 bar (up to 98 %). For both reactors, a 5 % reduction in carbon conversion is observed at 450 °C for SiC filler. Methane selectivity remains above 99 % in all cases, except for SiC filler at 1 bar (90 %). However, SiC filler shows better thermal diffusion, facilitating operational control.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A comparison of carbon capture and biomass utilisation for decarbonising oxygen blast furnace ironmaking

  • Barón, Cristian
  • Bailera, Manuel
  • Perpiñán, Jorge
  • Peña, Begoña
The Iron and Steel industry stands as a significant industrial source of CO2 emissions, contributing 7% to the global CO2 emissions. Therefore, innovative methods for CO2 removal must be developed in the current path to heavy-industry decarbonization. This work presents and compares two low-carbon brownfield concepts, integrated in an existing steelmaking plant, which incorporates power-to-gas technology, top gas recycling and oxygen blast furnace. The first concept captures carbon via calcium looping and uses it as the source for the methanation plant to produce synthetic natural gas, which is injected in the blast furnace as reducing agent. The second concept is based on charcoal and syngas production through biomass pyrolysis. The former is pulverized and injected into the blast furnace, replacing part of the fossil coke used in the reference steelmaking plant. The latter is used as carbon source in the methanation stage, avoiding the carbon capture stage. Promising results are obtained for the concept which uses biomass as carbon source in the process, achieving a CO2 abatement cost of 64.5 €/tCO2. It is estimated that this cost could be reduced to 55.4 €/tCO2 by scale economy. Despite current economic challenges, the potential mid-term profitability, driven by the ongoing deployment of renewable energy, identifies the utilization of biomass as a solution for environmentally conscious steelmaking.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Techno-economic assessment of the sorption enhanced methanation: Levelized cost of methane, performance indicators and sensitivity analysis

  • Barón, C.
  • Gómez, L.
  • Martínez, I.
  • Bailera, M.
This work presents the first techno-economic assessment of sorption-enhanced methanation (SEM) based on TRL-3 experimental data, comparing it with conventional methanation (CM). Experimental tests fitted a kinetic model for reactor sizing in a 200 MWe plant. While SEM requires more catalyst (223.7 kg/MWe) than CM (70–90 kg/MWe), both systems show similar CAPEX (∼700-800 M€). The results highlight that SEM generates three times higher income due to superior product purity. Conventional methanation often faces economic losses when producing 95% CH4, as levelized costs (LCOM, 2.4 – 3.3 €/kg) exceed market prices (0.5 €/kg). Although CM can be profitable at 99% purity market, SEM achieves 99.9% CH4, accessing a premium market (12 €/kg) that guarantees profitability even in unfavorable hydrogen cost scenarios. Consequently, SEM emerges as a key technology to enhance the economic viability and maturity of innovative H2 production.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Environmental assessment of carbon mitigation retrofit pathways in integrated BF-BOF steel plants under electricity supply scenarios

  • Pascual, S.
  • Barón, C.
  • Bailera, M.
  • Peña, B.
  • Llera, E.
  • Lisbona, P.
Decarbonizing the iron and steel industry is critical for sustainable economic development. This study applies Life Cycle Assessment (LCA) to evaluate the environmental and energy implications of four novel carbon mitigation retrofit pathways compared to a conventional blast furnace-basic oxygen furnace (BF-BOF) plant (S0). These scenarios integrate retrofit technologies into existing infrastructure: amine-based carbon capture for storage (S1), Power-to-Gas technology for methanol synthesis (S2), a methanation process for internal gas substitution (S3), or direct hydrogen utilization via blast furnace injection (S4). Results indicate that S1 achieves the highest reduction in global warming potential (32%), constrained by the residual coke requirements of the blast furnace, while fossil resource scarcity decreases by 4% in S2 and S4. Although mineral resource scarcity remains stable across all scenarios, water consumption in electrolyzer-based systems triples, contributing 22% to the direct electrolyzer demand and 78% to the indirect raw materials and energy mix. Non-renewable energy use drops by 26% in scenarios with a high renewable energy integration (S2, S3 and S4). Sensitivity analysis reveals that electricity sourcing is the primary driver of environmental performance; a highly non-renewable European energy mix increases global warming potential, fossil resource scarcity, non-renewable cumulative energy demand and water consumption by up to 115%. Conversely, the 100% wind-powered alternative drastically reduces carbon emissions but slightly increases mineral resource scarcity (4.5%), due to infrastructure requirements. Overall, while Power-to-Gas and hydrogen integration significantly decouple existing steelmaking from fossil fuel dependence, these findings define the realistic boundaries of retrofit decarbonization, demonstrating that low-carbon electricity infrastructure is a strict prerequisite for circular carbon and hydrogen deployment in integrated BF-BOF systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Carbon capture and oxy-combustion for glassmaking decarbonization through Power-to-Gas: technical and economic viability assessment

  • Barón, Cristian
  • Perpiñán, Jorge
  • Peña, Begoña
Decarbonization of the glass industry is addressed through indirect electrification achieved by the production and use of renewable synthetic methane under Power-to-Gas integration schemes. The CO2 captured in the glass furnace reacts with e-hydrogen to produce renewable methane which substitutes the fossil natural gas currently burnt. Four novel low-carbon concepts are compared with a container conventional plant from techno-economic viewpoint. They mainly differ in the carbon capture technology: (1) calcium looping with replacement of raw material by CaO purge; (2) amine scrubbing, (3) oxy-glass melting with O2-CO2 atmosphere, and (4) pure oxy-combustion in the melting furnace. Besides comparison of energy penalty and CO2 emission reduction, the economic impact of implementing abatement technologies is analysed under three economic scenarios: full electricity purchase and self-production via photovoltaic or wind farm. In all cases, the natural gas consumption is reduced to 95%, but the maximum CO2 reductions are achieved with pure oxy-combustion (96%). When combined with wind self-production, the amine case presents the best carbon abatement (60 €/tCO2) and specific implementation costs (13 €/tglass) for a plant of 250 tglass/d. However, at bigger plant sizes (600 tglass/d) the pure oxy-combustion presents comparable results (51 €/tCO2 and 14 €/tglass) to the amines case (57 €/tCO2 and 12 €/tglass).