Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

High oxygen and SNG injection in blast furnace ironmaking with Power to Gas integration and CO2 recycling

  • Perpiñán, Jorge
  • Bailera, Manuel
  • Peña, Begona
  • Romeo, Luis M.
  • Eveloy, Valerie
In the last years, reduction of CO2 emissions from the steel industry has been of great importance. Carbon capture, oxygen blast furnaces and top gas recycling technologies, among others, have been deeply studied as low carbon solutions. In this paper, a novel integration of carbon capture and power to gas technologies in the steelmaking industry is presented. Green hydrogen via proton exchange membrane (PEM) electrolysis and CO2 via methyldiethanolamine (MDEA) scrubbing from the blast furnace gas (BFG) are used to produce synthetic natural gas in an isothermal fixed bed methanation plant. The latter gas is injected into the blast furnace, closing a carbon loop and reducing coal consumption. The oxygen by-produced in the electrolyser covers the entire oxygen demand of the steelmaking plant and avoids the need for an air separation unit (ASU). The novelty of this work relies on the variation of the oxygen enrichment and its temperature in the hot blast, and how it influences the power to gas integration concept. This power to gas integration is compared with a conventional BF-BOF plant from a technical, economic, energy and environmental point of view. Both plant process configurations were implemented in Aspen Plus simulations, assessing the fossil fuel demand, energy penalty, cost and CO2 emissions. Emission reduction up to 34% can be achieved with power to gas integration, with an energy penalty of 17 MJ/tHM and a cost of 352 €/tCO2.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Full oxygen blast furnace steelmaking: From direct hydrogen injection to methanized BFG injection

  • Perpiñán, Jorge
  • Bailera, Manuel
  • Peña, Begoña
This paper presents a novel concept of Power to Gas in an oxygen blast furnace, through blast furnace gas methanation and direct H2 injection. The PEM electrolyser produces H2, which reacts with the CO and CO2 from the blast furnace gas forming synthetic natural gas. The latter gas is injected into the blast furnace, closing a carbon loop and avoiding CO2 emissions. A parametric analysis is performed to vary the H2:CO2 ratio in the methanation reaction. Different ratios are simulated and compared, among of which the most representative are: (i) 2.5, where unreacted CO2 is directly recycled with the synthetic natural gas; (ii) 4, where stoichiometric conditions are found and the synthetic gas is composed mostly by CH4; and (iii) 8, where an excess of H2 is found in the synthetic gas; and (iv) an infinite ratio, where only H2 is injected in the blast furnace. In the latter, the methanation plant is not required, and no synthetic natural gas is produced. The results show that low H2:CO2 ratios perform poorly, involving high PEM sizes and high costs but only a 5% of CO2 avoidance (compared to conventional blast furnaces). A H2:CO2 ratio of 4 and full H2 injection results in higher reduction of CO2 emissions (33.8 % and 28.6%) with carbon abatement costs of 260 and 245 €/tCO2, respectively.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Effect of sharing schemes on the collective energy self-consumption feasibility

  • Llera-Sastresa, Eva
  • Gimeno, José Ángel
  • Osorio-Tejada, José Luis
  • Portillo-Tarragona, Pilar
Collective self-consumption is called to be a crucial part of the current energy transition. In addition to the advantages of individual self-consumption, the possibility of improving economic feasibility exists. This paper shows how matching production and consumption loads increase the rate of self-consumption. Still, how the electricity is distributed among a renewable energy community’s prosumers would reduce the total costs of self-consumed energy. Possible criteria for the allocation of the generated electricity among shareholders are analysed. The study also evaluates the use of static and dynamic distribution coefficients, observing their results and applicability and sorting them to maximise self-consumption participants’ savings. The results are questioned against them and a reference scenario without shared self-consumption installation. As the exploitation of renewable energy for self-consumption is closely linked to the energy market and regulations, the analysis is based on a territorial case study. It is shown that the highest savings occur when electricity is allocated following distribution coefficients that consider the customer’s energy consumption better than investment participation or contracted power, even when the compensation of surpluses is added. These criteria can accomplish technical and economic objectives and are introduced in regulations that foster the requested changes in consumers’ behaviour and prosumers for sustainability.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Integration of power to gas and biomass charcoal in oxygen blast furnace ironmaking

  • Bailera, Manuel
  • Rebolledo, Boris
The paper introduces a novel approach for mitigating CO2 emissions in blast furnaces by integrating top gas recycling, an oxy-fuel regime, power to gas, and biomass pyrolysis. Various case studies were conducted, involving the adjustment of pyrolysis temperatures (300 °C, 500 °C, 700 °C, and 900 °C) and varying the quantity of blast furnace gas directed to methanation for carbon recycling. Pinus radiata, abundant and cost-effective in Chile and Spain, was chosen as the biomass source. The integration was modeled using the extended operating line methodology and evaluated through 12 key performance indicators, such as flame temperature, coke consumption, CO2 emissions, and specific primary energy consumption per unit of CO2 avoided. Optimal performance was observed with pyrolysis at 700 °C and no blast furnace gas recycled through methanation. This configuration achieved a 58 % reduction in CO2 emissions, with an energy consumption of 9.8 MJ/kgCO2, and obviated the need for geological storage. Comparing this innovative proposal with other oxygen blast furnace approaches from the literature revealed a 13 percentage point improvement in CO2 reduction over the second-best alternative. Additionally, the required electrolysis capacity, influencing capital expenditure, was 57 % lower, and energy consumption was reduced by 44 %.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Outline of all potential Power to Gas integrations in blast furnace ironmaking: A systematic review

  • Perpiñán, Jorge
  • Bailera, Manuel
  • Peña, Begoña
This work presents the first systematic review analysis of potential Power to Gas integrations in blast furnace ironmaking. The primary objective of the paper is to evaluate the PtG technology implementation in both conventional air-blown and full oxygen blast furnaces, considering different BFG recycling routes (upper, shaft or tuyeres), and synthetic gases (SNG, H2 or syngas). Employing a systematic methodology, the paper compares all the studies using 14 Key Performance Indicators (KPI) and elaborates a discussion on the main findings and limitations, proposing areas for future research. PtG application enables air-blown blast furnaces to cut emissions to 1060 kgCO2/tHM. With PtG and top gas recycling, oxygen blast furnaces achieve a reduction to 747 kgCO2/tHM, and when combined with geological storage, the reduction further drops to 435 kgCO2/tHM. Additionally, the authors propose a novel PtG-ironmaking integration based on the findings of this paper.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Testing Ni-based catalysts for the methanation of industrial gases at different levels of sulfur poisoning: From catalysts formulation optimization to kinetics

  • Bailera, Manuel
  • Bacariza, Carmen
  • Teixeira, Paula
  • Legaz, Jorge
  • García-Mariaca, Alexander
  • Peña, Begoña
  • Lisbona, Pilar
Decarbonizing the industry is key to achieving goals against climate change. The use of synthetic fuels and their regeneration is promoted, utilizing the industry's own emissions. However, implementing processes like carbon dioxide methanation for synthetic natural gas generation is a challenge in these industries due to the presence of impurities, such as sulfur. The objective of this study is to compare different supports and promoters for a nickel-based CO2 methanation catalyst at various levels of sulfur poisoning (0–1 wt%). Based on the results obtained, alumina emerged as the optimal catalyst support, showcasing superior catalytic performance compared to other tested materials across all examined reaction temperatures. Additionally, calcium (1 wt%) was identified as the most effective promoter, demonstrating the highest performance not only in unpoisoned catalysts but also when comparing samples with 1 wt% of sulfur poisoning. Additionally, the first sulfur-dependent kinetic model for methanation was developed, for the best Ni/Support and Ni/Promoter/Support catalyst. The kinetic model is valid for 0 – 1.0 wt% S poisoning, 1 bar, 200 – 450 °C, and 86 100 ml h−1 gcat−1 (error within ±5 %).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A case study of financing zero-emission power-to-gas technologies in Spain

  • Portillo-Tarragona, Pilar
  • Llera-Sastresa, Eva
  • Scarpellini, Sabina
  • Benito-Bentué, Darío
A zero-emissions scenario entails new energy systems minimizing short and medium-term carbon emissions and transitioning to renewable sources in the long term. In the face of these challenges, information about investments in sustainable energy technologies has to be considered a priority issue for many industry organizations, as it is still an incipient topic in academic literature. In this scenario, this study considers and prioritizes the financial resources mobilized for investments in power-to-gas technologies because they contribute to producing clean and efficient fuels from renewables or carbon-neutral sources. This process typically involves electrolysis to produce hydrogen converted to synthetic gas, which is used as a storable form of renewable energy. This study is essentially qualitative and exploratory, based on semi-structured interviews with experts to help define and classify the financial resources that investments require for these technologies in Spain. We study the institutional influence on the power-to-gas deployment and reflect on how the mobilization of specific resources can contribute to these zero-emission technologies and the related social metrics for reporting sustainable investments, also from the perspective of a Spanish financial institution as an exploratory case study. This study provides theoretical and practical insights regarding the current and future mobilization of financial resources for investments in power-to-gas technologies and energy utilities’ sustainable finance policies in a zero-emissions scenario.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A comparison of carbon capture and biomass utilisation for decarbonising oxygen blast furnace ironmaking

  • Barón, Cristian
  • Bailera, Manuel
  • Perpiñán, Jorge
  • Peña, Begoña
The Iron and Steel industry stands as a significant industrial source of CO2 emissions, contributing 7% to the global CO2 emissions. Therefore, innovative methods for CO2 removal must be developed in the current path to heavy-industry decarbonization. This work presents and compares two low-carbon brownfield concepts, integrated in an existing steelmaking plant, which incorporates power-to-gas technology, top gas recycling and oxygen blast furnace. The first concept captures carbon via calcium looping and uses it as the source for the methanation plant to produce synthetic natural gas, which is injected in the blast furnace as reducing agent. The second concept is based on charcoal and syngas production through biomass pyrolysis. The former is pulverized and injected into the blast furnace, replacing part of the fossil coke used in the reference steelmaking plant. The latter is used as carbon source in the methanation stage, avoiding the carbon capture stage. Promising results are obtained for the concept which uses biomass as carbon source in the process, achieving a CO2 abatement cost of 64.5 €/tCO2. It is estimated that this cost could be reduced to 55.4 €/tCO2 by scale economy. Despite current economic challenges, the potential mid-term profitability, driven by the ongoing deployment of renewable energy, identifies the utilization of biomass as a solution for environmentally conscious steelmaking.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Environmental assessment of carbon mitigation retrofit pathways in integrated BF-BOF steel plants under electricity supply scenarios

  • Pascual, S.
  • Barón, C.
  • Bailera, M.
  • Peña, B.
  • Llera, E.
  • Lisbona, P.
Decarbonizing the iron and steel industry is critical for sustainable economic development. This study applies Life Cycle Assessment (LCA) to evaluate the environmental and energy implications of four novel carbon mitigation retrofit pathways compared to a conventional blast furnace-basic oxygen furnace (BF-BOF) plant (S0). These scenarios integrate retrofit technologies into existing infrastructure: amine-based carbon capture for storage (S1), Power-to-Gas technology for methanol synthesis (S2), a methanation process for internal gas substitution (S3), or direct hydrogen utilization via blast furnace injection (S4). Results indicate that S1 achieves the highest reduction in global warming potential (32%), constrained by the residual coke requirements of the blast furnace, while fossil resource scarcity decreases by 4% in S2 and S4. Although mineral resource scarcity remains stable across all scenarios, water consumption in electrolyzer-based systems triples, contributing 22% to the direct electrolyzer demand and 78% to the indirect raw materials and energy mix. Non-renewable energy use drops by 26% in scenarios with a high renewable energy integration (S2, S3 and S4). Sensitivity analysis reveals that electricity sourcing is the primary driver of environmental performance; a highly non-renewable European energy mix increases global warming potential, fossil resource scarcity, non-renewable cumulative energy demand and water consumption by up to 115%. Conversely, the 100% wind-powered alternative drastically reduces carbon emissions but slightly increases mineral resource scarcity (4.5%), due to infrastructure requirements. Overall, while Power-to-Gas and hydrogen integration significantly decouple existing steelmaking from fossil fuel dependence, these findings define the realistic boundaries of retrofit decarbonization, demonstrating that low-carbon electricity infrastructure is a strict prerequisite for circular carbon and hydrogen deployment in integrated BF-BOF systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Carbon capture and oxy-combustion for glassmaking decarbonization through Power-to-Gas: technical and economic viability assessment

  • Barón, Cristian
  • Perpiñán, Jorge
  • Peña, Begoña
Decarbonization of the glass industry is addressed through indirect electrification achieved by the production and use of renewable synthetic methane under Power-to-Gas integration schemes. The CO2 captured in the glass furnace reacts with e-hydrogen to produce renewable methane which substitutes the fossil natural gas currently burnt. Four novel low-carbon concepts are compared with a container conventional plant from techno-economic viewpoint. They mainly differ in the carbon capture technology: (1) calcium looping with replacement of raw material by CaO purge; (2) amine scrubbing, (3) oxy-glass melting with O2-CO2 atmosphere, and (4) pure oxy-combustion in the melting furnace. Besides comparison of energy penalty and CO2 emission reduction, the economic impact of implementing abatement technologies is analysed under three economic scenarios: full electricity purchase and self-production via photovoltaic or wind farm. In all cases, the natural gas consumption is reduced to 95%, but the maximum CO2 reductions are achieved with pure oxy-combustion (96%). When combined with wind self-production, the amine case presents the best carbon abatement (60 €/tCO2) and specific implementation costs (13 €/tglass) for a plant of 250 tglass/d. However, at bigger plant sizes (600 tglass/d) the pure oxy-combustion presents comparable results (51 €/tCO2 and 14 €/tglass) to the amines case (57 €/tCO2 and 12 €/tglass).