Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 143
Encontrada(s) 2 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Exploring a route to cyclic acenes by on-surface synthesis

  • Schulz, Fabian
  • García Melo, Fátima
  • Kaisser, Katharina
  • Pérez Meirás, María Dolores
  • Guitián Rivera, Enrique
  • Gross, Leo
  • Peña Gil, Diego
A route to generate cyclacenes by on-surface synthesis is explored. We started by synthesizing two tetraepoxycyclacenes by sequences of Diels–Alder cycloadditions. Subsequently, these molecules were deposited onto Cu(111) and scanning-tunneling-microscopy(STM)-based atom manipulation was employed to dissociate the oxygen atoms. Atomic force microscopy (AFM) with CO-functionalized tips enabled the detailed characterization of the reaction products and revealed that, at most, two oxygens per molecule could be removed. Importantly, our experimental results suggest that the generation of cyclacenes by the described route might be possible for larger epoxycyclacenes
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Synthesis and reactivity of a trigonal porous nanographene on a gold surface

  • Zuzak, Rafał
  • Pozo Míguez, Iago
  • Engelund, Mads
  • García Lekue, Aran
  • Vilas Varela, Manuel
  • Alonso, José M.
  • Szymonski, Marek
  • Guitián Rivera, Enrique
  • Pérez Meirás, María Dolores
  • Godlewski, Szymon
  • Peña Gil, Diego
The synthesis of porous nanographenes is a challenging task for solution chemistry, and thus, on-surface synthesis provides an alternative approach. Here, we report the synthesis of a triporous nanographene with 102 sp2 carbon atoms by combining solution and surface chemistry. The carbon skeleton was obtained by Pd-catalyzed cyclotrimerization of arynes in solution, while planarization of the molecule was achieved through two hierarchically organized on-surface cyclodehydrogenation reactions, intra- and inter-blade. Remarkably, the three non-planar [14]annulene pores of this nanographene further evolved at higher temperatures showing interesting intra-porous on-surface reactivity
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Studying an antiaromatic polycyclic hydrocarbon adsorbed on different surfaces

  • Mjazik, Zsolt
  • Pavliček, Niko
  • Vilas-Varela, Manuel
  • Pérez Meirás, María Dolores
  • Moll, Nikolaj
  • Guitián Rivera, Enrique
  • Meyer, Gehrard
  • Peña Gil, Diego
  • Gross, Leo
Antiaromatic and open-shell molecules are attractive because of their distinct electronic and magnetic behaviour. However, their increased reactivity creates a challenge for probing their properties. Here, we describe the on-surface and in-solution generation and characterisation of a highly reactive antiaromatic molecule: indeno[1,2-b]fluorene (IF). In solution, we generated IF by KI-induced dehalogenation of a dibromo-substituted precursor molecule and found that IF survives for minutes at ambient conditions. Using atom manipulation at low temperatures we generated IF on Cu(111) and on bilayer NaCl. On these surfaces, we characterised IF by bond-order analysis using non-contact atomic force microscopy with CO-functionalised tips and by orbital imaging using scanning tunnelling microscopy. We found that the closed-shell configuration and antiaromatic character predicted for gas-phase IF are preserved on the NaCl film. On Cu(111), we observed significant bond-order reorganisation within the s-indacene moiety because of chemisorption, highlighting the importance of molecule surface interactions on the π-electron distribution
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Intramolecular Coupling of Terminal Alkynes by Atom Manipulation

  • Albrecht, Florian
  • Rey Vieites, Dulce María
  • Fatayer, Shadi
  • Schulz, Fabian
  • Pérez Meirás, María Dolores
  • Peña Gil, Diego
  • Gross, Leo
Glaser‐like coupling of terminal alkynes by thermal activation is extensively used in on‐surface chemistry. Here we demonstrate an intramolecular version of this reaction performed by atom manipulation. We used voltage pulses from the tip to trigger a Glaser‐like coupling between terminal alkyne carbons within a custom‐synthesized precursor molecule adsorbed on bilayer NaCl on Cu(111). Different conformations of the precursor molecule and the product were characterized by molecular structure elucidation with atomic force microscopy and orbital density mapping with scanning tunneling microscopy, accompanied by density functional theory calculations. We revealed partially dehydrogenated intermediates, providing insight into the reaction pathway
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Dodecacene generated on surface: reopening of the energy gap

  • Eisenhut, Frank
  • Kühne, T.
  • García Melo, Fátima
  • Fernández Castro, Saleta
  • Guitián Rivera, Enrique
  • Pérez Meirás, María Dolores
  • Trinquier, Georges
  • Cuniberti, Gianaurelio
  • Joachim, Christian
  • Peña Gil, Diego
  • Moresco, Francesca
The acene series represents a model system to investigate the intriguing electronic properties of extended π-electron structures in the one-dimensional limit, which are important for applications in electronics and spintronics and for the fundamental understanding of electronic transport. This article presents the on-surface generation of the longest acene obtained so far: dodecacene. Scanning tunneling spectroscopy gives access to the energy position and spatial distribution of its electronic states on the Au(111) surface. We observe that, after a progressive closing of the gap and a stabilization to about 1 eV at the length of decacene and undecacene, the energy gap of dodecacene unexpectedly increases to 1.4 eV. Considering the acene series as an exemplary general case, the paper discusses the evolution with length of the single tunneling resonances in comparison with ionization energy, electronic affinity, and optical gap
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Self-texturizing electronic properties of a 2-dimensional GdAu2 layer on Au(111): The role of out-of-plane atomic displacement

  • Correa, Alexander
  • Farnesi Camellone, Matteo
  • Barragán, Ana
  • Kumar, Abhishek
  • Cepek, Cinzia
  • Pedio, Maddalena
  • Fabris, Stefano
  • Vitali, Lucia
Here, we show that the electronic properties of a surface-supported 2-dimensional (2D) layer structure can self-texturize at nanoscale. The local electronic properties are determined by structural relaxation processes through variable adsorption stacking configurations. We demonstrate that the spatially modulated layer-buckling, which arises from the lattice mismatch and the layer/substrate coupling at the GdAu/Au(111) interface, is sufficient to locally open an energy gap of ∼0.5 eV at the Fermi level in an otherwise metallic layer. Additionally, this out-of-plane displacement of the Gd atoms patterns the character of the hybridized Gd-d states and shifts the center of mass of the Gd 4f multiplet proportionally to the lattice distortion. These findings demonstrate the close correlation between the electronic properties of the 2D-layer and its planarity. We demonstrate that the resulting template shows different chemical reactivities which may find important applications., This project is partially funded by the EU-H2020 research and innovation programme under grant agreement no. 654360, NFFA-Europe and the Spanish Ministry of Economy (MAT2013-46593-C6-4-P and MAT2016-78293-C6-5-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bias-dependent local structure of water molecules at a metallic interface

  • Pedroza, Luana S.
  • Brandimarte, Pedro
  • Reily Rocha, Alexandre
  • Fernández-Serra, M-V.
Understanding the local structure of water at the interfaces of metallic electrodes is a key issue in aqueous-based electrochemistry. Nevertheless a realistic simulation of such a setup is challenging, particularly when the electrodes are maintained at different potentials. To correctly compute the effect of an external bias potential applied to truly semi-infinite surfaces, we combine Density Functional Theory (DFT) and Non-Equilibrium Green's Function (NEGF) methods. This framework allows for the out-of-equilibrium calculation of forces and dynamics, and directly correlates to the chemical potential of the electrodes, which is introduced experimentally. In this work, we apply this methodology to study the electronic properties and atomic forces of a water molecule at the interface of a gold surface. We find that the water molecule tends to align its dipole moment with the electric field, and it is either repelled or attracted to the metal depending on the sign and magnitude of the applied bias, in an asymmetric fashion., The work was funded by DOE Early Career Awards No. DE-SC0003871 and DE-FG02-09ER16052. L. S. P. and A. R. R. also acknowledge financial support from ICTP-SAIFR (FAPESP project No. 2011/11973-4) and the ICTP-Simons Associate Scheme. P. B. acknowledges financial support from the FP7 FET-ICT “Planar Atomic and Molecular Scale devices” (PAMS) project (funded by the European Commission under contract No. 610446), the Spanish Agencia Estatal de Investigación (Grant No. MAT2016-78293-C6-4-R) and the Dep. de Educación of the Basque Government and UPV/EHU (Grant No. IT-756-13). This research used computational resources at the Center for Functional Nanomaterials, Brookhaven National Laboratory, which is supported by the US Department of Energy under Contract No. DE-AC02-98CH10886 and the S. Dumont supercomputer at the National Laboratory for Scientific Computing (LNCC/MCTI, Brazil)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Charge-transfer states and optical transitions at the pentacene-TiO2 interface

  • Ljungberg, Mathias P.
  • Vänskä, O.
  • Koval, Peter
  • Koch, S. W.
  • Kira, M.
  • Sánchez-Portal, Daniel
Pentacene molecules have recently been observed to form a well-ordered monolayer on the (110) surface of rutile TiO, with the molecules adsorbed lying flat, head to tail. With the geometry favorable for direct optical excitation and given its ordered character, this interface seems to provide an intriguing model to study charge-transfer excitations where the optically excited electrons and holes reside on different sides of the organic-inorganic interface. In this work, we theoretically investigate the structural and electronic properties of this system by means of ab initio calculations and compute its excitonic absorption spectrum. Molecular states appear in the band gap of the clean TiO surface, which enables charge-transfer excitations directly from the molecular HOMO to the TiO conduction band. The calculated optical spectrum shows a strong polarization dependence and displays excitonic resonances corresponding to the charge-transfer states, which could stimulate new experimental work on the optical response of this interface., This work was financed by the Deutsche Forschungsgemeinschaft (DFG) through the SFB 1083 project. MPL, DSP and PK also acknowledges support from Spanish MINECO (Grants No. MAT2013-46593-C6-2-P and MAT2016-78293-C6-4-R) and PK also acknowledges financial support from Fellows Guipuzcoa program from Gipuzkoako Foru Aldundia through the FEDER funding scheme of the European Union., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Doping of graphene nanoribbons via functional group edge modification

  • Carbonell, Eduard
  • Hieulle, Jeremy
  • Vilas-Varela, Manuel
  • Brandimarte, Pedro
  • Iraola, Mikel
  • Barragán, Ana
  • Li, Jingcheng
  • Abadia, Mikel
  • Corso, Martina
  • Sánchez-Portal, Daniel
  • Peña, Diego
  • Pascual, José I.
We report the on-surface synthesis of 7-armchair graphene nanoribbons (7-AGNRs) substituted with nitrile (CN) functional groups. The CN groups are attached to the GNR backbone by modifying the 7-AGNR precursor. Whereas many of these groups survive the on-surface synthesis, the reaction process causes the cleavage of some CN from the ribbon backbone and the on-surface cycloisomerization of few nitriles onto pyridine rings. Scanning tunneling spectroscopy and density functional theory reveal that CN groups behave as very efficient n-dopants, significantly downshifting the bands of the ribbon and introducing deep impurity levels associated with the nitrogen electron lone pairs., This work was supported by FP7 FET-ICT “Planar Atomic and Molecular Scale devices” (PAMS) project (funded by the European Commission under Contract No. 610446), by the Agencia Estatal de Investigacion (Cooperative Grant No. MAT2016-78293 and Grant FIS2015-62538-ERC), the Basque Government (Dep. de Educacion and UPV/EHU, Grant No. IT-756-13, and Dep. Industry, Grant PI_2015_1_42), the Xunta de Galicia (Centro singular de investigacion de Galicia accreditation 2016−2019, ED431G/09), and the European Regional Development Fund (ERDF)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electronic structure of titanylphthalocyanine layers on Ag(111)

  • Lerch, A.
  • Fernández, Laura
  • Ilyn, Max
  • Gastaldo, Michele
  • Paradinas, Markos
  • Valbuena, Miguel A.
  • Mugarza, Aitor
  • Ibrahim, A. B. M.
  • Sundermeyer, J.
  • Höfer, Ulrich
  • Schiller, Frederik
We have investigated the electronic structures of axially oxo functionalized titanylphthalocyanine (TiOPc) on Ag(111) by X-ray and ultraviolet photoelectron spectroscopies, two-photon photoemission, X-ray absorption spectroscopy, and X-ray magnetic circular dichroism. Furthermore, we use complementary data of TiOPc on graphite and planar copper phthalocyanine (CuPc) on Ag(111) for a comparative analysis. Both molecules adsorb on Ag(111) in a parallel orientation to the surface, for TiOPc with an oxygen-up configuration. The interaction of nitrogen and carbon atoms with the substrate is similar for both molecules, while the bonding of the titanium atom to Ag(111) in the monolayer is found to be slightly more pronounced than in the CuPc case. Ultraviolet photoemission spectroscopy reveals an occupation of the lowest unoccupied molecular orbital (LUMO) level in monolayer thick TiOPc on Ag(111) related to the interaction of the molecules and the silver substrate. This molecule-metal interaction also causes an upward shift of the Ag(111) Shockley state that is transformed into an unoccupied interface state with energies of 0.23 and 0.33 eV for the TiOPc monolayer and bilayer, respectively, at the Brillouin zone center., The authors acknowledge financial support from the Deutsche Forschungsgemeinschaft through SFB 1083 “Structure and Dynamics of Internal Interfaces”, the Spanish CSIC I-Link programm, the Spanish Ministry of Economy and Competitiveness, MINECO (under Contract No. MAT2016-78293-C6-2-R, and Severo Ochoa No. SEV-2013-0295.), and by the Secretariat for Universities and Research, Knowledge Department of the Generalitat de Catalunya (2014 SGR 715). M. Paradinas thanks the Spanish Government for financial support through PTA2014-09788-I fellowships. ICN2 is funded by the CERCA Programme/Generalitat de Catalunya., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electron refraction at lateral atomic interfaces

  • Abd El-Fattah, Zakaria M.
  • Kher-Elden, Mohammad A.
  • Yassin, O.
  • El-Okr, M. M.
  • Ortega, J. Enrique
  • García de Abajo, Francisco Javier
We present theoretical simulations of electron refraction at the lateral atomic interface between a 'homogeneous' Cu(111) surface and the >nanostructured> one-monolayer (ML) Ag/Cu(111) dislocation lattice. Calculations are performed for electron binding energies barely below the 1 ML Ag/Cu(111) M-point gap (binding energy E = 53 meV, below the Fermi level) and slightly above its Γ-point energy (E = 160 meV), both characterized by isotropic/circular constant energy surfaces. Using plane-wave-expansion and boundary-element methods, we show that electron refraction occurs at the interface, the Snell law is obeyed, and a total internal reflection occurs beyond the critical angle. Additionally, a weak negative refraction is observed for E = 53 meV electron energy at beam incidence higher than the critical angle. Such an interesting observation stems from the interface phase-matching and momentum conservation with the umklapp bands at the second Brillouin zone of the dislocation lattice. The present analysis is not restricted to our Cu-Ag/Cu model system but can be readily extended to technologically relevant interfaces with spin-polarized, highly featured, and anisotropic constant energy contours, such as those characteristic for Rashba systems and topological insulators., This work has been supported in part by the Spanish MINECO (Grant Nos. MAT2013–46593-C6–4-P, MAT2016–78293-C6–6-R, MAT2014-59096-P, and SEV2015-0522), the Basque Government (Grant No. IT621–13), the Catalan CERCA Program, Fundacio Privada Cellex, and AGAUR (Grant No. 2014 SGR 1400)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exploring the relation between intramolecular conjugation and band dispersion in one-dimensional polymers

  • García-Fernández, Carlos
  • Sierda, Emil
  • Abadia, Mikel
  • Bugenhagen, Bernhard
  • Prosenc, Marc Heinrich
  • Wiesendanger, Roland
  • Bazarnik, Maciej
  • Ortega, J. Enrique
  • Brede, Jens
  • Matito, Eduard
  • Arnau, Andrés
Making use of the inherent surface anisotropy of different high index surface planes vicinal to the low index Au(111) orientation, one-dimensional polymers have been synthesized following established procedures from two different precursor molecules. The successful polymerization of both 4,4″-dibromo-p-terphenyl and 5,5′-dibromo-salophenato-Co(II) precursors into poly(p-phenylene) and poly[salophenato-Co(II)], respectively, has been confirmed by scanning tunneling microscopy and low energy electron diffraction. Angle-resolved photoemission spectroscopy data reveal a highly dispersive band in the case of poly(p-phenylene) while no significant dispersion is resolved for poly[salophenato-Co(II)]. On the basis of density functional theory calculations, we explain this observation as a result of a high conjugation along the aromatic phenyl groups in poly(p-phenylene) that is absent in the case of poly[salophenato-Co(II)], where intramolecular conjugation is interrupted in the salophenato-Co(II) unit. Furthermore, we make use of multicenter and delocalization indexes to characterize the electron mobility (corresponding to a high band dispersion) along different paths associated with individual molecular orbitals., The authors thank for technical and human support provided by IZO-SGI SGIker of UPV/EHU and European funding (ERDF and ESF). Financial support comes from Eusko Jaurlaritza (Basque Government) through the projects IT-588-13, IT-756-13, and IT621-13 as well as from the Spanish MINECO/FEDER through Grants MAT2013-46593-C6-4-P and MAT2016-78293-C6-6-R, as well as projects CTQ2014-52525-P and FIS2016-75862-P. E.S., M.B., and R.W. gratefully acknowledge financial support from the Office of Naval Research via Grant N00014-16-1-2900 and the Deutsche Forschungsgemeinschaft via SFB668-B4., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On-surface oligomerization of self-terminating molecular chains for the design of spintronic devices

  • Sierda, Emil
  • Abadia, Mikel
  • Brede, Jens
  • Elsebach, Micha
  • Bugenhagen, Bernhard
  • Prosenc, Marc Heinrich
  • Bazarnik, Maciej
  • Wiesendanger, Roland
Molecular spintronics is currently attracting a lot of attention due to its great advantages over traditional electronics. A variety of self-assembled molecule-based devices are under development, but studies regarding the reliability of the growth process remain rare. Here, we present a method to control the length of molecular spintronic chains and to make their terminations chemically inert, thereby suppressing uncontrolled coupling to surface defects. The temperature evolution of chain formation was followed by X-ray photoelectron spectroscopy to determine optimal growth conditions. The final structures of the chains were then studied, using scanning tunneling microscopy, as a function of oligomerization conditions. We find that short chains are readily synthesized with high yields and that long chains, even exceeding 70mers, can be realized under optimized growth parameters, albeit with reduced yields., We gratefully acknowledge financial support from the Office of Naval Research via Grant No. N00014-16-1-2900, and the Deutsche Forschungsgemeinschaft via SFB668-B4. Moreover, M.A. and J.B. acknowledge funding from the Spanish MINECO under contract Nos. MAT2013-46593-C6-4-P and MAT2016-78293-C6-5-R as well as the Basque Government Grants IT621- 13 and IT-756-13., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Polymerization of well-aligned organic nanowires on a ferromagnetic rare-earth surface alloy

  • Abadia, Mikel
  • Ilyn, Max
  • Piquero-Zulaica, Ignacio
  • Gargiani, Pierluigi
  • Rogero, Celia
  • Ortega, J. Enrique
  • Brede, Jens
The high reactivity of magnetic substrates toward molecular overlayers has so far inhibited the realization of more sophisticated on-surface reactions, thereby depriving these interfaces of a significant class of chemically tailored organics such as graphene nanoribbons, oligonuclear spin-chains, and metal-organic networks. Here, we present a multitechnique characterization of the polymerization of 4,4″-dibromo-p-terphenyl precursors into ordered poly(p-phenylene) arrays on top of the bimetallic GdAu surface alloy. The activation temperatures for bromine scission and subsequent homocoupling of molecular precursors were followed by temperature-dependent X-ray photoelectron spectroscopy. The structural characterizations of supramolecular and polymeric phases, performed by low-energy electron diffraction and scanning tunneling microscopy, establish an extraordinary degree of order extending into the mesoscale. Taking advantage of the high homogeneity, the electronic structure of the valence band was determined with angle-resolved photoemission spectroscopy. Importantly, the transition of localized molecular orbitals into a highly dispersive π-band, the fingerprint of successful polymerization, was observed while leaving all surface-related bands intact. Moreover, ferromagnetic ordering in the GdAu alloy was demonstrated for all phases by X-ray absorption spectroscopy. The transfer of well-established in situ methods for growing covalently bonded macromolecules with atomic precision onto magnetic rare-earth alloys is an important step toward toward studying and controlling intrinsic carbon- and rare-earth-based magnetism., We acknowledge funding from the Spanish MINECO under contract Nos. MAT2013-46593-C6-4-P and MAT2016-78293-C6-5-R as well as the Basque Government Grants IT621-13 and IT-756-13., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Precise engineering of quantum dot array coupling through their barrier widths

  • Piquero-Zulaica, Ignacio
  • Lobo-Checa, Jorge
  • Sadeghi, Ali
  • Abd El-Fattah, Zakaria M.
  • Mitsui, Chikahiko
  • Okamoto, Toshihiro
  • Pawlak, Rémy
  • Meier, Tobias
  • Arnau, Andrés
  • Ortega, J. Enrique
  • Takeya, Jun
  • Goedecker, Stefan
  • Meyer, Ernst
  • Kawai, Shigeki
Quantum dots are known to confine electrons within their structure. Whenever they periodically aggregate into arrays and cooperative interactions arise, novel quantum properties suitable for technological applications show up. Control over the potential barriers existing between neighboring quantum dots is therefore essential to alter their mutual crosstalk. Here we show that precise engineering of the barrier width can be experimentally achieved on surfaces by a single atom substitution in a haloaromatic compound, which in turn tunes the confinement properties through the degree of quantum dot intercoupling. We achieved this by generating self-assembled molecular nanoporous networks that confine the two-dimensional electron gas present at the surface. Indeed, these extended arrays form up on bulk surface and thin silver films alike, maintaining their overall interdot coupling. These findings pave the way to reach full control over two-dimensional electron gases by means of self-assembled molecular networks., This work was supported in part by the Spanish Ministry of Economy (grants MAT2013-46593-C6-4-P, MAT2016-78293-C6-6-R and FIS2013-48286-C2-1-P), by the Spanish Research Council (CSIC- 201560I022), by the Basque Government (grants IT621-13 and IT-756-13), by the Japan Science and Technology Agency (JST), ‘Precursory Research for Embryonic Science and Technology’ (PRESTO) for a project of ‘Molecular technology and creation of new function’, by JSPS KAKENHI Grant Number 15K21765, by the Swiss National Science Foundation, by the Swiss Nanoscience Institute, and by COST Action (European Cooperation in Science and Technology) MP1303. Swiss National Supercomputing Center in Lugano (Project s499 and s621) is acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Symmetry, shape, and energy variations in frontier molecular orbitals at organic/metal interfaces: The case of F4TCNQ

  • Borghetti, Patrizia
  • Sarasola, Ane
  • Merino-Díez, Nestor
  • Vasseur, Guillaume
  • Floreano, Luca
  • Lobo-Checa, Jorge
  • Arnau, Andrés
  • Oteyza, Dimas G. de
  • Ortega, J. Enrique
Near edge X-ray absorption, valence and core-level photoemission, and density functional theory calculations are used to study molecular levels of tetracyano-2,3,5,6-tetrafluoroquinodimethane (FTCNQ) deposited on Ag(111) and BiAg/Ag(111). The high electron affinity of FTCNQ triggers a large static charge transfer from the substrate, and, more interestingly, hybridization with the substrate leads to a radical change of symmetry, shape, and energy of frontier molecular orbitals. The lowest unoccupied molecular orbital (LUMO) shifts below the Fermi energy, becoming the new highest occupied molecular orbital (n-HOMO), whereas the n-LUMO is defined by a hybrid band with mixed π∗ and σ∗ symmetries, localized at quinone rings and cyano groups, respectively. The presence of Bi influences the way the molecule contacts the substrate with the cyano group. The molecule/surface distance is closer and the bond more extended over substrate atoms in FTCNQ/Ag(111), whereas in FTCNQ/BiAg/Ag(111) the distance is larger and the contact more localized on top of Bi. This does not significantly alter molecular levels, but it causes the respective absence or presence of optical excitations in FTCNQ core-level spectra., We acknowledge financial support from the Spanish Ministry of Economy (Grants MAT2013-46593-C6-4-P, MAT2016-78293-C6-6-R, and FIS2016-75862-P) and Basque Government (Grants IT-621-13 and IT-756-13). P.B. acknowledges financial support from the EU-Horizon 2020 Research and Innovation Programme through the Marie Sklodowska-Curie grant agreement No 658056., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Theoretical insights into unexpected molecular core level shifts: Chemical and surface effects

  • Sarasola, Ane
  • Abadia, Mikel
  • Rogero, Celia
  • Garcia-Lekue, Aran
A set of density-functional theory based tools is employed to elucidate the influence of chemical and surface-induced changes on the core level shifts of X-ray photoelectron spectroscopy experiments. The capabilities of our tools are demonstrated by analyzing the origin of an unpredicted component in the N 1s core level spectra of metal phthalocyanine molecules (in particular ZnPc) adsorbed on Cu(110). We address surface induced effects, such as splitting of the lowest unoccupied molecular orbital or local electrostatic effects, demonstrating that these cannot account for the huge core level shift measured experimentally. Our calculations also show that, when adsorbed at low temperatures, these molecules might capture hydrogen atoms from the surface, giving rise to hydrogenated molecular species and, consequently, to an extra component in the molecular core level spectra. Only upon annealing, and subsequent hydrogen release, would the molecules recover their nominal structural and electronic properties., The authors thank L. Floreano and M. Blanco-Rey for useful discussions, and acknowledge support from the Basque Departamento de Educacion and UPV/EHU (Grants No. PI-2016-1-0027, IT-756-13 and IT-621-13), the Spanish Ministry (Grants No. MAT2016-78293-C6-4-R, MAT2016-78293-C6-5-R, and FIS2016-75862-P), and the European Union FP7-ICT Integrated Project PAMS under Contract No. 610446., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Vicinage effect in the energy loss of H2 dimers: Experiment and calculations based on time-dependent density-functional theory

  • Koval, Natalia E.
  • Borisov, Andrei G.
  • Rosa, L.F.S.
  • Stori, E. M.
  • Dias, J. F.
  • Grande, P.L.
  • Sánchez-Portal, Daniel
  • Díez Muiño, Ricardo
We present a combined theoretical and experimental study of the energy loss of H2+ molecular ions interacting with thin oxide and carbon films. As a result of quantum mechanical interference of the target electrons, the energy loss of a molecular projectile differs from the sum of the energy losses of individual atomic projectiles. This difference is known as the vicinage effect. Calculations based on the time-dependent density functional theory allow the first-principles description of the dynamics of target excitations produced by the correlated motion of the nucleons forming the molecule. We investigate in detail the dependence of the vicinage effect on the speed and charge state of the projectile and find an excellent agreement between calculated and measured data., This work was partially supported by the Basque Departamento de Educación, Universidades e Investigación, the University of the Basque Country UPV/EHU (Grant No. IT-756-13) and the Spanish Ministerio de Economía y Competitividad (Grants No. FIS2016-76471-P and No. MAT2016-78293-C6-4-R). We are indebted to the Brazilian agencies CAPES, CNPq, and FAPERGS for partial support of the experimental part of this work., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Width-dependent band gap in armchair graphene nanoribbons reveals Fermi level pinning on Au(111)

  • Merino-Díez, Nestor
  • Garcia-Lekue, Aran
  • Carbonell, Eduard
  • Li, Jingcheng
  • Corso, Martina
  • Colazzo, Luciano
  • Sedona, Francesco
  • Sánchez-Portal, Daniel
  • Pascual, José I.
  • Oteyza, Dimas G. de
We report the energy level alignment evolution of valence and conduction bands of armchair-oriented graphene nanoribbons (aGNR) as their band gap shrinks with increasing width. We use 4,4″-dibromo-para-terphenyl as the molecular precursor on Au(111) to form extended poly-para-phenylene nanowires, which can subsequently be fused sideways to form atomically precise aGNRs of varying widths. We measure the frontier bands by means of scanning tunneling spectroscopy, corroborating that the nanoribbon's band gap is inversely proportional to their width. Interestingly, valence bands are found to show Fermi level pinning as the band gap decreases below a threshold value around 1.7 eV. Such behavior is of critical importance to understand the properties of potential contacts in GNR-based devices. Our measurements further reveal a particularly interesting system for studying Fermi level pinning by modifying an adsorbate's band gap while maintaining an almost unchanged interface chemistry defined by substrate and adsorbate., The project leading to this publication has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No 635919), from the European Union FP7 FET-ICT “Planar Atomic and Molecular Scale devices” (PAMS) project (Contract No. 610446), from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, Grant No. MAT2016-78293-C6), from the Basque Department of Education (PI-2016-1-0027), and from the University of Padova (Grant CPDA154322, Project AMNES)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Atomic-scale forces induced by a hydrogen molecule trapped in a tunneling junction

  • Carbonell, Eduard
  • Corso, Martina
  • Li, Jingcheng
  • Brión-Rios, Anton X.
  • Sánchez-Portal, Daniel
  • Pascual, José I.
Hydrogen molecules can be trapped in the nanocavity formed by the tip of a scanning tunneling microscope and a metal or molecular surface, and produce sharp inelastic non-linearities in the tunneling spectra. Here, we study the interaction effects of hydrogen in a tunneling junction created over Manganese phthalocyanines molecules in two oxidation states. The effect of hydrogen in the tunneling spectra varies strongly depending on the molecular species, but its force spectrum is fairly independent on the molecular state. We find that in mild tunneling conditions hydrogen-induced forces are weakly attractive during a small range of tip sample distance. The van der Waals interaction shows a maximum value of 140 pN, which faintly depends on electrostatic variations along the surface. These results show that AFM can be employed to resolve the complex interaction landscape of a trapped hydrogen molecule and deduce fainter effects such as molecular deformations or dipolar fields., The research was financially supported by the Spanish Ministerio de Economia y Competitividad, MINECO (Grant FIS 2015-62538-ERC, MAT2016-78293-C6, and the Maria de Maeztu Units of Excellence Programme MDM-2016-0618), the Basque Government (Departamento de Industria, grant no. PI-2015-1-42, and Departamento de Educación and UPV/EHU, grant No. IT-756-13), and the European Regional Development Fund (ERDF)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Atomic-scale lightning rod effect in plasmonic picocavities: A classical view to a quantum effect

  • Urbieta, Mattin
  • Barbry, Marc
  • Zhang, Yao
  • Koval, Peter
  • Sánchez-Portal, Daniel
  • Zabala, Nerea
  • Aizpurua, Javier
Plasmonic gaps are known to produce nanoscale localization and enhancement of optical fields, providing small effective mode volumes of about a few hundred nm. Atomistic quantum calculations based on time-dependent density functional theory reveal the effect of subnanometric localization of electromagnetic fields due to the presence of atomic-scale features at the interfaces of plasmonic gaps. Using a classical model, we explain this as a nonresonant lightning rod effect at the atomic scale that produces an extra enhancement over that of the plasmonic background. The near-field distribution of atomic-scale hot spots around atomic features is robust against dynamical screening and spill-out effects and follows the potential landscape determined by the electron density around the atomic sites. A detailed comparison of the field distribution around atomic hot spots from full quantum atomistic calculations and from the local classical approach considering the geometrical profile of the atoms' electronic density validates the use of a classical framework to determine the effective mode volume in these extreme subnanometric optical cavities. This finding is of practical importance for the community of surface-enhanced molecular spectroscopy and quantum nanophotonics, as it provides an adequate description of the local electromagnetic fields around atomic-scale features with use of simplified classical methods., Financial support from Project No. FIS2016-80174-P and MAT2016-78293-C6-4-R of MINECO, grant of Consolidated Groups at UPV/EHU (IT-756-13) of the Basque Government, and project 70NANB15H32 from U.S. Department of Commerce, National Institute of Standards and Technology, is acknowledged. M.U. acknowledges support from the University of the Basque Country through a Ph.D. grant, as well as DIPC and CFM at the initial stages of this work. M.B. acknowledges support from the Departamento de Educacion of the Basque Government through a Ph.D. grant, as well as from Euskampus and the DIPC at the initial stages of this work. P.K. acknowledges financial support from the Fellows Gipuzkoa program of the Gipuzkoako Foru Aldundia through the FEDER funding scheme of the European Union, “Una manera de hacer Europa”., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Building a 22-ring nanographene by combining in-solution and on-surface syntheses

  • Zuzak, Rafał
  • Castro-Esteban, Jesús
  • Brandimarte, Pedro
  • Engelund, Mads
  • Cobas, Agustín
  • Piątkowski, Piotr
  • Kolmer, Marek
  • Pérez, Dolores
  • Guitián, Enrique
  • Szymonski, Marek
  • Sánchez-Portal, Daniel
  • Godlewski, Szymon
  • Peña, Diego
A nanographene formed by the fusion of 22 benzene rings has been prepared by combining an in-solution Pd-catalyzed cycloaddition reaction and on-surface Au-promoted cyclodehydrogenation. The structure and electronic properties of the resulting three-fold symmetric CH molecule have been characterized by scanning probe microscopy with atomic resolution and corroborated by theoretical modelling., This research was supported by the National Science Center, Poland (2017/26/E/ST3/00855), the EU project PAMS (610446), the Agencia Estatal de Investigacion (MAT2016-78293-C6-3-R, MAT2016-78293-C6-4-R, FIS2017-83780-P and CTQ2016-78157-R), the Xunta de Galicia (Centro singular de investigacion de Galicia, acreditacion 2016-2019, ED431G/09) and the European Regional Development Fund (ERDF). R. Z. acknowledges support received from the National Science Center, Poland (2017/24/T/ST5/00262)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Catalytic oxidation of carbon monoxide on a curved Pd crystal: Spatial variation of active and poisoning phases in stationary conditions

  • Schiller, Frederik
  • Ilyn, Max
  • Pérez-Dieste, Virginia
  • Escudero, Carlos
  • Huck-Iriart, Cristián
  • Ruiz del Árbol, Nerea
  • Hagman, Benjamin
  • Merte, Lindsay R.
  • Bertram, Florian
  • Shipilin, Mikhail
  • Blomberg, Sara
  • Gustafson, Johan
  • Lundgren, Edvin
  • Ortega, J. Enrique
Understanding nanoparticle catalysis requires novel approaches in which adjoining crystal orientations can be studied under the same reactive conditions. Here we use a curved palladium crystal and near-ambient pressure X-ray photoemission spectroscopy to characterize chemical species during the catalytic oxidation of CO in a whole set of surfaces vicinal to the (111) direction simultaneously. By stabilizing the reaction at fixed temperatures around the ignition point, we observe a strong variation of the catalytic activity across the curved surface. Such spatial modulation of the reaction stage is straightforwardly mapped through the photoemission signal from active oxygen species and poisoning CO, which are shown to coexist in a transient regime that depends on the vicinal angle. Line-shape analysis and direct comparison with ultrahigh vacuum experiments help identifying and quantifying all such surface species, allowing us to reveal the presence of surface oxides during reaction ignition and cooling-off., We acknowledge financial support from the Spanish Ministry of Economy (Grants MAT-2012-38567-C02-02, MAT-2016-78293-C6, MAT-2017-88374-P) and Basque Government (Grant IT-1255-19)., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cooperative sction for molecular debromination reaction on Cu(110)

  • Sarasola, Ane
  • Barragán, Ana
  • Vitali, Lucia
Copper is the paradigmatic catalyzer of the Ullmann cross-coupling reaction. Despite this, its role in the reaction is still under debate. Here, we shed light on the mechanistic steps of debromination, characterizing a prototypical molecule, namely 4,7-dibromobenzo[c]-1,2,5-thiadiazole (2Br-BTD), deposited on a Cu(110) surface. By means of scanning probe techniques and first principle calculations, we demonstrate the oxidative addition of Cu atoms leading to a -C-Cu-Br metal-organic complex. The scission of the strongly bound bromine atoms requires the cooperative action of neighboring complexes resulting in the formation of Cu-coordinated BTD structures., All authors acknowledge the economic support of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO Grant number MAT2016-78293-C6-5-R and FIS2016-75862-P). A.B. acknowledges Vicerrectorado de Investigación of the University of the Basque Country (UPV/EHU) for the PhD fellowship (2016), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of structural fluctuations on elastic lifetimes of adsorbate states: Isonicotinic acid on rutile(110)

  • Müller, Moritz
  • Sánchez-Portal, Daniel
  • Lin, He
  • Brivio, Gian Paolo
  • Selloni, Annabella
  • Fratesi, Guido
We sample ab initio molecular dynamics trajectories to address the impact of structural fluctuations on elastic lifetimes of adsorbate states at room temperature focusing on heterogeneous charge injection from isonicotinic acid as a key anchoring unit in dye-sensitized energy devices. Complementing related theoretical studies, we employ a Green's function technique based on density functional theory to account for a fully semi-infinite substrate of rutile TiO(110). We address the effect of a core-excitation enabling direct comparison with soft X-ray experiments. We find that room temperature fluctuations drastically improve the agreement with experimental lifetime measurements while the core-hole plays an important role shifting the spectra and reducing the electron vibrational coupling of the adsorbate states. Ultimately, the emerging resonance spectra highlight the role of the continuum of acceptor states in temperature broadened Voigt-type profiles., The authors acknowledge financial support from the European Union Seventh Framework Programme under Grant Agreement No. 607232 (THINFACE). D.S.-P. and M.M. acknowledge support from the Spanish Ministerio de Economia y Competitividad (MINECO) (Grant No. MAT2016-78293-C6-4-R), the Basque Dep. de Educacion, and the UPV/EHU (Grant No. IT-756-13). A.S. acknowledges support from DoEBES, Division of Chemical Science, Geosciences and Biosciences under Award No. DE-SC0007347., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electronic properties of substitutionally boron-doped graphene nanoribbons on a Au(111) surface

  • Carbonell, Eduard
  • Garcia-Lekue, Aran
  • Corso, Martina
  • Vasseur, Guillaume
  • Brandimarte, Pedro
  • Lobo-Checa, Jorge
  • Oteyza, Dimas G. de
  • Li, Jingcheng
  • Kawai, Shigeki
  • Saito, Shohei
  • Yamaguchi, Shigehiro
  • Ortega, J. Enrique
  • Sánchez-Portal, Daniel
  • Pascual, José I.
High-quality graphene nanoribbons (GNRs) grown by on-surface synthesis strategies with atomic precision can be controllably doped by inserting heteroatoms or chemical groups in the molecular precursors. Here, we study the electronic structure of armchair GNRs substitutionally doped with di-boron moieties at the center, through a combination of scanning tunneling spectroscopy, angle-resolved photoemission, and density functional theory simulations. Boron atoms appear with a small displacement toward the surface, signaling their stronger interactions with the metal. We find two boron-rich flat bands emerging as impurity states inside the GNR band gap, one of them particularly broadened after its hybridization with the gold surface states. In addition, the boron atoms shift the conduction and valence bands of the pristine GNR away from the gap edge and leave unaffected the bands above and below, which become the new frontier bands and have a negligible boron character. This is due to the selective mixing of boron states with GNR bands according to their symmetry. Our results depict that the GNR band structure can be tuned by modifying the separation between di-boron moieties., We acknowledge financial support from the Basque Government (Departamento de Industria, grant no. PI-2015-1-42, and Departamento de Educación and UPV/EHU, grant no. IT-756-13), the Spanish Ministerio de Economía y Competitividad (grant nos. MAT2016-78293-C6, FIS2015-62538-ERC, FIS2017-83780-P), the Maria de Maeztu Units of Excellence Programme (MDM-2016-0618), the European Research Council (grant agreement no. 635919), and the European Regional Development Fund., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of magnetic ordering between Cr adatoms on the Yu-Shiba-Rusinov states of the β−Bi2 Pd superconductor

  • Choi, Deung-Jang
  • García-Fernández, Carlos
  • Herrera, Edwin
  • Rubio-Verdú, Carmen
  • Ugeda, Miguel M.
  • Guillamón, Isabel
  • Suderow, Hermann
  • Pascual, José I.
  • Lorente, Nicolás
We show that the magnetic ordering of coupled atomic dimers on a superconductor is revealed by their intragap spectral features. Chromium atoms on the superconductor β−Bi2Pd surface display Yu-Shiba-Rusinov bound states, detected as pairs of intragap excitations in tunneling spectra. By means of atomic manipulation with a scanning tunneling microscope’s tip, we form Cr dimers with different arrangements and find that their intragap features appear either shifted or split with respect to single atoms. These spectral variations are associated with the magnetic coupling, ferromagnetic or antiferromagnetic, of the dimer, as confirmed by density functional theory simulations. The striking qualitative differences between the observed tunneling spectra prove that intragap Shiba states are extremely sensitive to the magnetic ordering on the atomic scale., D.-J. C. and J. I. P. thank the European Union for support under the H2020-MSCA-IF2014 Marie-Curie Individual Fellowship program (Proposal No. 654469), Spanish MINECO (MAT2016-78293-C6-1-R), Diputacion Foral de Gipuzkoa for Grant No. 64/15, and the European Regional Development Fund (ERDF). N. L. thanks Spanish MINECO (Grant No. MAT2015-66888-C3-2-R). M. M. U. acknowledges Spanish MINECO (MAT2014-60996-R). E. H., I. G., and H. S. acknowledge FIS2014-54498-R and MDM-2014-0377, COST MP16218 nanocohybri, ERC PNICTEYES Grant Agreement No. 679080, and Departamento Administrativo de Ciencia, Tecnología e Innovación, COLCIENCIAS (Colombia), Programa doctorados en el exterior and convocatoria 568-2012, as well as Comunidad de Madrid through program NanofrontmagCM (Grant No. S2013/MIT-2850)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Jahn-Teller splitting in single adsorbed molecules revealed by isospin-flip excitations

  • Kügel, Jens
  • Hsu, Pin-Jui
  • Böhme, Markus
  • Schneider, Kathrin
  • Senkpiel, Jacob
  • Serrate, David
  • Bode, Matthias
  • Lorente, Nicolás
Scanning tunneling spectroscopy measurements of Mn phthalocyanine (MnPc) molecules adsorbed on (√3×√3) surface alloys show single inelastic steps at exclusively positive or negative bias strongly depending on the tip position. This is in contrast to conventional molecular excitation thresholds, which are independent of the current direction and therefore always occur at both positive and negative bias. This polarity selectivity is found to coincide with the spatial distribution of occupied and empty orbitals. Because of the interaction with the substrate, charge transfer into the doubly degenerate dπ orbitals of MnPc takes place. The resulting Jahn-Teller effect lifts the degeneracy and leads to an isospin- or pseudospin-flip excitation, the inelastic analogue of an orbital Kondo resonance., Financial support has been granted by MINECO (MAT2015-66888-C3-2-R and MAT2016-78293-C6-6-R) and FEDER funds. M. Bode acknowledges financial support by DFG through SFB 1170 “ToCoTronics” (project C02)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On-surface synthesis of heptacene on Ag(001) from brominated and non-brominated tetrahydroheptacene precursors

  • Colazzo, Luciano
  • Mohammed, Mohammed S. G.
  • Dorel, Ruth
  • Nita, Pawel
  • García-Fernández, Carlos
  • Abufager, Paula
  • Lorente, Nicolás
  • Echavarren, Antonio M.
  • Oteyza, Dimas G. de
Achieving the Ag(001)-supported synthesis of heptacene from two related reactants reveals the effect of the presence of Br atoms on the reaction process. The properties of reactants, intermediates and end-products are further characterized by scanning tunneling microscopy and spectroscopy., We acknowledge funding from the European Research Council under the European Union’s Horizon 2020 programme (Grant Agreement No. 635919), and from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, Grant No. MAT2016-78293-C6, MAT2015-66888-C3-2-R), Agencia Estatal de Investigación (AEI)/FEDER, UE (CTQ2016-75960-P), the AGAUR (2017 SGR 1257), and the CERCA Program/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Site-selective reversible Diels–Alder reaction between a biphenylene-based polyarene and a semiconductor surface

  • Godlewski, Szymon
  • Engelund, Mads
  • Peña, Diego
  • Zuzak, Rafał
  • Kawai, Hiroyo
  • Kolmer, Marek
  • Caeiro, Jorge
  • Guitián, Enrique
  • Vollhardt, K. Peter C.
  • Sánchez-Portal, Daniel
  • Szymonski, Marek
  • Pérez, Dolores
Understanding the mechanisms involved in the covalent attachment of organic molecules to surfaces is a major challenge for nanotechnology and surface science. On the basis of classical organic chemistry mechanistic considerations, key issues such as selectivity and reactivity of the organic adsorbates could be rationalized and exploited for the design of molecular-scale circuits and devices. Here we use tris(benzocyclobutadieno)triphenylene, a singular Y-shaped hydrocarbon containing antiaromatic cyclobutadienoid rings, as a molecular probe to study the reaction of polycyclic conjugated molecules with atomic scale moieties, dangling-bond (DB) dimers on a hydrogen-passivated Ge(001):H surface. By combining molecular design, synthesis, scanning tunneling microscopy and spectroscopy (STM/STS) and computational modeling, we show that the attachment involves a concerted [4+2] cycloaddition reaction that is completely site-selective and fully reversible. This selectivity, governed by the bond alternation induced by the presence of the cyclobutadienoid rings, allows for the control of the orientation of the molecules with respect to the surface DB-patterning. We also demonstrate that by judicious modification of the electronic levels of the polycyclic benzenoid through substituents, the reaction barrier height can be modified. Finally, we show that after deliberate tip-induced covalent bond cleavage, adsorbed molecules can be used to fine tune the electronic states of the DB dimer. This power to engineer deliberately the bonding configuration and electronic properties opens new perspectives for creating prototypical nanoscale circuitry., This work was supported by the FP7 FET-ICT “Planar Atomic and Molecular Scale devices” (PAMS) project (funded by the European Commission under contract no. 610446), by the Polish Ministry for Science and Higher Education from financial resources for science in 2013–2017 granted for an international co-financed project (contract no. 2913/7.PR/2013/2) and by projects CTQ2016-78157-R, MAT2016-78293-C6-3R and MAT2016-78293-C6-4R (AEI/FEDER, UE). EG, DP and DP are grateful for financial support from the Xunta de Galicia (Centro singular de investigación de Galicia accreditation 2016–2019, ED431G/09) and the European Union (European Regional Development Fund-ERDF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structure and electronic states of vicinal Ag(111) surfaces with densely kinked steps

  • Ortega, J. Enrique
  • Vasseur, Guillaume
  • Piquero-Zulaica, Ignacio
  • Matencio, Sonia
  • Valbuena, Miguel A.
  • Rault, Julien E.
  • Schiller, Frederik
  • Corso, Martina
  • Mugarza, Aitor
  • Lobo-Checa, Jorge
Vicinal surfaces exhibiting arrays of atomic steps are frequently investigated due to their diverse physical-chemical properties and their use as growth templates. However, surfaces featuring steps with a large number of low-coordinated kink-atoms have been widely ignored, despite their higher potential for chemistry and catalysis. Here, the equilibrium structure and the electronic states of vicinal Ag(111) surfaces with densely kinked steps are investigated in a systematic way using a curved crystal. With scanning tunneling microscopy we observe an exceptional structural homogeneity of this class of vicinals, reflected in the smooth probability distribution of terrace sizes at all vicinal angles. This allows us to observe, first, a subtle evolution of the terrace-size distribution as a function of the terrace-width that challenges statistical models of step lattices, and second, lattice fluctuations around resonant modes of surface states. As shown in angle resolved photoemission experiments, surface states undergo stronger scattering by fully-kinked step-edges, which triggers the full depletion of the two-dimensional band at surfaces with relatively small vicinal angles., We acknowledge the financial support from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, Grant No. MAT2016-78293-C6 and Severo Ochoa No. SEV-2013-0295), the Basque Government (Grant No. IT-621-13), the regional Government of Aragon (RASMIA project), the CERCA Programme/Generalitat de Catalunya, and the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (Contract No. EFA194/16 TNSI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Survival of spin state in magnetic porphyrins contacted by graphene nanoribbons

  • Li, Jingcheng
  • Merino-Díez, Nestor
  • Carbonell, Eduard
  • Vilas-Varela, Manuel
  • Oteyza, Dimas G. de
  • Peña, Diego
  • Corso, Martina
  • Pascual, José I.
We report on the construction and magnetic characterization of a fully functional hybrid molecular system composed of a single magnetic porphyrin molecule bonded to graphene nanoribbons with atomically precise contacts. We use on-surface synthesis to direct the hybrid creation by combining two molecular precursors on a gold surface. High-resolution imaging with a scanning tunneling microscope finds that the porphyrin core fuses into the graphene nanoribbons through the formation of new carbon rings at chemically predefined positions. These ensure the stability of the hybrid and the extension of the conjugated character of the ribbon into the molecule. By means of inelastic tunneling spectroscopy, we prove the survival of the magnetic functionality of the contacted porphyrin. The molecular spin appears unaffected by the graphenoid electrodes, and we simply observe that the magnetic anisotropy appears modified depending on the precise structure of the contacts., We acknowledge the financial support from Spanish Agencia Estatal de Investigación (AEI) (project nos. MAT2016-78293-C6 and FIS2015-62538-ERC, and the Maria de Maeztu Units of Excellence Programme MDM-2016-0618), the Basque Government (Department Industry, grant no. PI-2015-1-42), the European project PAMS (610446), the Xunta de Galicia (Centro singular de investigación de Galicia accreditation 2016 to 2019, ED431G/09), the European Research Council (grant agreement no. 635919), and the European Regional Development Fund. A, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Switching from reactant to substrate engineering in the selective synthesis of graphene nanoribbons

  • Merino-Díez, Nestor
  • Lobo-Checa, Jorge
  • Nita, Pawel
  • Garcia-Lekue, Aran
  • Basagni, Andrea
  • Vasseur, Guillaume
  • Tiso, Federica
  • Sedona, Francesco
  • Das, Pranab K.
  • Fujii, Jun
  • Vobornik, Ivana
  • Sambi, Mauro
  • Pascual, José I.
  • Ortega, J. Enrique
  • Oteyza, Dimas G. de
The challenge of synthesizing graphene nanoribbons (GNRs) with atomic precision is currently being pursued along a one-way road, based on the synthesis of adequate molecular precursors that react in predefined ways through self-assembly processes. The synthetic options for GNR generation would multiply by adding a new direction to this readily successful approach, especially if both of them can be combined. We show here how GNR synthesis can be guided by an adequately nanotemplated substrate instead of by the traditionally designed reactants. The structural atomic precision, unachievable to date through top-down methods, is preserved by the self-assembly process. This new strategy’s proof-of-concept compares experiments using 4,4′′-dibromo-para-terphenyl as a molecular precursor on flat Au(111) and stepped Au(322) substrates. As opposed to the former, the periodic steps of the latter drive the selective synthesis of 6 atom-wide armchair GNRs, whose electronic properties have been further characterized in detail by scanning tunneling spectroscopy, angle resolved photoemission, and density functional theory calculations., The project leading to this publication has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Grant Agreement No 635919), from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, Grant No. MAT2016-78293-C6), from the Basque Government (Grant No. IT-621-13), from the regional Government of Aragon (RASMIA Project), and from the University of Padova (Grant CPDA154322, Project AMNES)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning ultrafast electron injection dynamics at organic-graphene/metal interfaces

  • Ravikumar, Abhilash
  • Kladnik, Gregor
  • Müller, Moritz
  • Cossaro, Albano
  • Bavdek, Gregor
  • Patera, Laerte L.
  • Sánchez-Portal, Daniel
  • Venkataraman, Latha
  • Morgante, Alberto
  • Brivio, Gian Paolo
  • Cvetko, Dean
  • Fratesi, Guido
We compare the ultrafast charge transfer dynamics of molecules on epitaxial graphene and bilayer graphene grown on Ni(111) interfaces through first principles calculations and X-ray resonant photoemission spectroscopy. We use 4,4′-bipyridine as a prototypical molecule for these explorations as the energy level alignment of core-excited molecular orbitals allows ultrafast injection of electrons from a substrate to a molecule on a femtosecond timescale. We show that the ultrafast injection of electrons from the substrate to the molecule is ∼4 times slower on weakly coupled bilayer graphene than on epitaxial graphene. Through our experiments and calculations, we can attribute this to a difference in the density of states close to the Fermi level between graphene and bilayer graphene. We therefore show how graphene coupling with the substrate influences charge transfer dynamics between organic molecules and graphene interfaces., This project received funding from the European Union Seventh Framework Programme under grant agreement no. 607232 [THINFACE] and A. R. and M. M. are grateful for this. The work was performed within the PCAM European doctorate. G. K. and D. C. acknowledge support from the Slovenian Research Agency (P1-0112). A. C. acknowledges support from the ANCHOR project of the MIUR FIRB 2010. M. M. and D. S. P. acknowledge partial support from MINECO MAT2016-78293-C6-4-R. Support from MIUR (PRIN 20105ZZTSE) and MAE (US14GR12) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unraveling the electronic structure of narrow atomically precise chiral graphene nanoribbons

  • Merino-Díez, Nestor
  • Li, Jingcheng
  • Garcia-Lekue, Aran
  • Vasseur, Guillaume
  • Vilas-Varela, Manuel
  • Carbonell, Eduard
  • Corso, Martina
  • Ortega, J. Enrique
  • Peña, Diego
  • Pascual, José I.
  • Oteyza, Dimas G. de
Recent advances in graphene-nanoribbon-based research have demonstrated the controlled synthesis of chiral graphene nanoribbons (chGNRs) with atomic precision using strategies of on-surface chemistry. However, their electronic characterization, including typical figures of merit like band gap or frontier band’s effective mass, has not yet been reported. We provide a detailed characterization of (3,1)-chGNRs on Au(111). The structure and epitaxy, as well as the electronic band structure of the ribbons, are analyzed by means of scanning tunneling microscopy and spectroscopy, angle-resolved photoemission, and density functional theory., The project leading to this publication has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement no. 635919), from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant nos. MAT2016-78293-C6, FIS2015-62538-ERC), from the Basque Government (grant nos. IT-621-13, PI-2015-1-42, PI-2016-1-0027), from the European Commission in FP7 FET-ICT “Planar Atomic and Molecular Scale Devices (PAMS) project (contract no. 610446), from the Xunta de Galicia (Centro singular de investigacion de Galicia accreditation 2016−2019, ED431G/09), and from the European Regional Development Fund (ERDF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Directional sub-femtosecond charge transfer dynamics and the dimensionality of 1T-TaS2

  • Kühn, Danilo
  • Müller, Moritz
  • Sorgenfrei, Florian
  • Giangrisostomi, Erika
  • Jay, Raphael M.
  • Ovsyannikov, Ruslan
  • Mårtensson, Nils
  • Sánchez-Portal, Daniel
  • Föhlisch, Alexander
For the layered transition metal dichalcogenide 1T-TaS2, we establish through a unique experimental approach and density functional theory, how ultrafast charge transfer in 1T-TaS2 takes on isotropic three-dimensional character or anisotropic two-dimensional character, depending on the commensurability of the charge density wave phases of 1T-TaS2. The X-ray spectroscopic core-hole-clock method prepares selectively in- and out-of-plane polarized sulfur 3p orbital occupation with respect to the 1T-TaS2 planes and monitors sub-femtosecond wave packet delocalization. Despite being a prototypical two-dimensional material, isotropic three-dimensional charge transfer is found in the commensurate charge density wave phase (CCDW), indicating strong coupling between layers. In contrast, anisotropic two-dimensional charge transfer occurs for the nearly commensurate phase (NCDW). In direct comparison, theory shows that interlayer interaction in the CCDW phase - not layer stacking variations - causes isotropic three-dimensional charge transfer. This is presumably a general mechanism for phase transitions and tailored properties of dichalcogenides with charge density waves., AF acknowledges funding by the Helmholtz Virtual Institute VI 419 and the ERC Advanced Investigator Grant No. 669531 EDAX. NM acknowledges funding by the ERC Advanced Investigator Grant No. 321319 ESUX and support from the Carl Tryggers foundation for Scientifc Research CTS. DS-P and MM acknowledge funding from EU-FP7 project THINFACE (grant No. 607232), Spanish MINECO (grant No. MAT2016-78293-C6-4-R), and Basque Dep.de Educación and UPV/EHU (grant No. IT-756-13)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Oxygen intercalation and oxidation of atomically thin h-BN grown on a curved Ni crystal

  • Makarova, Anna A.
  • Fernández, Laura
  • Usachov, Dmitry Yu.
  • Fedorov, Alexander
  • Bokai, Kirill A.
  • Smirnov, Dmitry A.
  • Laubschat, Clemens
  • Vyalikh, Denis V.
  • Schiller, Frederik
  • Ortega, J. Enrique
We study the effect of thermal oxygen exposure on a monolayer of h-BN grown on vicinal Ni surfaces by scanning tunneling microscopy, X-ray absorption, and photoemission spectroscopies. Using a curved Ni crystal, we carry out a systematic exploration of the h-BN monolayer interfacing a full variety of vicinal orientations around the (111) high-symmetry direction. We demonstrate the occurrence of two processes upon oxygen exposure: oxygen intercalation underneath the h-BN layer, which leads to decoupling of the h-BN from the substrate, and oxidation of h-BN itself, which proceeds via substitution of nitrogen atoms. Oxygen intercalation appears to be substrate orientation dependent, while oxidation of h-BN is rather uniform over the different vicinal planes. These findings will be of importance for future applications of BN-based devices and materials under ambient conditions., We are grateful to the Interdisciplinary Resource Center for Nanotechnology of the Research Park of Saint Petersburg State University for performing SEM measurements. A.A.M., C.L., and D.A.S. acknowledge DFG (Grant No. LA655-19/1) and BMBF (Grant No. 05K12OD2). L.F. and A.F. acknowledge financial support within the joint project of the Russian Science Foundation (Project 16-42-01093) and DFG (Grant LA655-17/1). K.A.B. and D.Yu.U. acknowledge Saint Petersburg State University for research Grant 11.65.42.2017 and RFBR (Grant 17-02-00427). We acknowledge financial support from the Spanish Ministry of Economy (Grants MAT-2016-78293-C6 and MAT-2017-88374-P) and Basque Government (Grant IT-1255-19). We acknowledge Helmholtz-Zentrum Berlin für Materialien und Energie for support within the bilateral Russian–German Laboratory program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Effect of structural fluctuations on elastic lifetimes of adsorbate states: isonicotinic acid on rutile(110)

  • Müller, Moritz
  • Sánchez-Portal, Daniel
  • Lin, He
  • Brivio, Gian Paolo
  • Selloni, Annabella
  • Fratesi, Guido
Resumen del trabajo presentado al Symposium on Surface Science (3S), celebrado en St. Christoph am Arlberg (Austria) del 25 de febrero al 10 de marzo de 2018., We sample ab initio molecular dynamics trajectories to address the impact of structural fluctuations on elastic lifetimes of adsorbate states at room temperature focusing on heterogeneous charge injection from isonicotinic acid as a key anchoring unit in dyesensitized energy devices. Complementing related theoretical studies, we employ a Green's function technique based on density functional theory to account for a fully semi-infinite substrate of rutile TiO2(110). We explicitly address the effect of a core-excitation, thus enabling the comparison with soft X-ray experiments. We find that taking into account room temperature fluctuations drastically improves the agreement with the experimental lifetime measurements. The presence of a core-hole plays an important role shifting down in energy the spectra and reducing the electron-vibrational coupling of the adsorbate states. This last observation is probably related to the larger localization of the molecular resonance under the presence of a core-hole. The cumulative resonance spectra can be described by Voigt-type profiles obtained by convoluting a Lorentzian peak describing the electronic resonance with a Gaussian distribution modeling the temperature broadening. However, we found that in order to get an optimal description it is crucial to account for the energy dependence of the statistically averaged electronic widths. This energy dependence is dominated by the variation of the density of acceptor states in the substrate., We acknowledge financial support from EU FP7 under the grant agreement No. 607232 (THINFACE), the Spanish MINECO (Grant No. MAT2016-78293-C6-4-R), the Basque Dep. de Educación and the UPV/EHU (Grant No. IT-756-13). MM work was performed within the PCAM European doctorate., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Shifting from reactant to substrate engineering in the selective synthesis of graphene nanoribbons

  • Merino-Díez, Nestor
  • Lobo-Checa, Jorge
  • Nita, Pawel
  • Garcia-Lekue, Aran
  • Li, Jingcheng
  • Carbonell, Eduard
  • Basagni, Andrea
  • Vasseur, Guillaume
  • Colazzo, Luciano
  • Tiso, Federica
  • Sedona, Francesco
  • Corso, Martina
  • Sambi, Mauro
  • Sánchez-Portal, Daniel
  • Pascual, José I.
  • Ortega, J. Enrique
  • Oteyza, Dimas G. de
Resumen del trabajo presentado al Symposium on Surface Science (3S), celebrado en St. Christoph am Arlberg (Austria) del 25 de febrero al 10 de marzo de 2018., The challenge of synthesizing graphene nanoribbons (GNRs) with atomic precision is currently being pursued along a one-way road, based on the synthesis of adequate molecular precursors that react in predefined ways and form GNRs through self-assembly processes. Adding a new direction to this readily successful approach, the synthetic options for GNRs are expected to multiply, especially if both approaches can be combined. We show here how, still based on self-assembly to maintain the atomic precision not yet achievable with top-down methods, selectivity in the GNR synthesis can be guided, instead of by designed reactants, by an adequately nanotemplated substrate. This new strategy´s proof-of-concept compares experiments using 4,4´´-dibromo-para-terphenyl as molecular precursor on flat Au(111) and stepped Au(322) substrates. On Au(111), the reactant first polymerizes into poly-para-phenylene (PPP) at moderate temperatures below 200 ºC. Annealing to higher temperatures drives the lateral fusion of PPP chains through cyclo-dehydrogenation, ending up with graphene nanoribbons of varying width depending on the number of polymers involved. The resulting samples are thus interesting to study width-dependent properties and phenomena in GNRs. We have used such samples to characterize the width-dependent band gap of GNRs and, most importantly, the associated evolution of the energy level alignment of frontier bands. Doing so, a Fermi level pinning scenario of the valence band has been found for GNRs displaying band gaps below ~1.7 eV.[1] However, from the synthetic point of view, selectivity towards particular GNRs is completely missing. A completely different scenario is found on Au(322). The polymerization and cyclodehydrogenation reactions occur in a similar way. However, the periodic steps of Au(322) limits the number of fusing polymers to two, resulting in the selective synthesis of 6 atomwide armchair GNRs (6-aGNRs). In addition, all GNRs being uniaxially aligned along the substrate´s steps, we have been able to characterize the sample´s valence band properties by angle resolved photoemission spectroscopy. Complemented with scanning tunneling spectroscopy measurements and density functional theory calculations, we end up with a fully coherent and complete picture of the electronic properties of 6-aGNRs., Support by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No 635919), from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, Grant No. MAT2016-78293-C6), and from the Basque Government (Grant No. IT-621-13) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Tuning the band structure of chiral Graphene Nanoribbons by functionalized edge groups

  • Merino-Díez, Nestor
  • Li, Jingcheng
  • Vilas-Varela, Manuel
  • Garcia-Lekue, Aran
  • Peña, Diego
  • Pascual, José I.
  • Oteyza, Dimas G. de
Resumen del trabajo presentado al International workshop On-Surface Synthesis (OSS), celebrado en Sant Feliu de Guíxol (España) del 23 al 28 de septiembre de 2018., Graphene nanoribbons (GNRs) have become nanostructured materials of remarkable interest mainly due to the presence of an energy gap, boosting their possible applications in semiconductor technology with respect to the gapless graphene. The great advances achieved during the last decade in the bottom-up synthesis methodologies allow for the defect-free synthesis of GNRs, a key step for unraveling their innate electronic structure and for their posterior use in applications. Several efforts have been recently focused on tuning the electronic structure of GNRs by doping their carbon skeleton with different atoms like nitrogen, sulfur, boron, etc. Recently, Carbonell-Sanromà and co-workers followed a new approach by covalently bonding cyano groups at the external edges of armchair graphene ribbons while preserving the internal carbon structure, observing a rigid shifting of the frontier molecular bands defining the electronic band gap of the ribbons. Following this line, here we tune the recently reported electronic structure of (3,1)-chiral GRNs by adding two functional groups with opposite electronic character: nitro (NO2) and amino (NH2) groups, the former (latter) being a well-known electron-withdrawing (donor) group., This work has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No 635919), and from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, Grant No. MAT2016-78293-C6)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Bottom-up fabrication of atomically precise graphene nanoribbons

  • Corso, Martina
  • Carbonell, Eduard
  • Oteyza, Dimas G. de
Trabajo presentado al International Workshop On-Surface Synthesis, celebrado en San Sebastián (España) del 27 al 30 de junio de 2016., Graphene nanoribbons (GNRs) make up an extremely interesting class of materials. On the one hand GNRs share many of the superlative properties of graphene, while on the other hand they display an exceptional degree of tunability of their optoelectronic properties. The presence or absence of correlated low-dimensional magnetism, or of a widely tunable band gap, is determined by the boundary conditions imposed by the width, crystallographic symmetry and edge structure of the nanoribbons. In combination with additional controllable parame-ters like the presence of heteroatoms, tailored strain, or the formation of hetero-structures, the possibilities to shape the electronic properties of GNRs according to our needs are fantastic. However, to really benefit from that tunability and harness the opportunities offered by GNRs, atomic precision is strictly required in their synthesis. This can be achieved through an on-surface synthesis approach, in which one lets appropriately designed precursor molecules to react in a selective way that ends up forming GNRs. In this chapter we review the structure-property relations inherent to GNRs, the synthesis approach and the ways in which the var-ied properties of the resulting ribbons have been probed, finalizing with selected examples of demonstrated GNR applications., Financial support by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement No. 635919) and by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, Grant Nos. MAT2016-78293-C6-1-R, MAT2016-78293-C6-5-R and FIS 2015-62538-ERC) is acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Theoretical studies on molecular adsorption and the effect of strain on core-level spectroscopy in different metal surfaces

  • Brión-Rios, Anton X.
Thesis submitted to the University of the Basque Country for the degree of Doctor in Physics., La interacción entre moléculas y materia tiene importantes implicaciones a nivel tecnológico e industrial lo que convierte a este área en un interesante campo de estudio. La adsorción molecular es una cuestión fundamental debido a las implicaciones prácticas que conlleva, por ejemplo, en reacciones catalíticas.El objetivo de esta tesis es el estudio de la adsorción molecular en distintas superficies. La adsorción de una molécula sobre una superficie puede modificar su estructura electrónica. La molécula puede estar químicamente ligada a la superficie, la carga eléctrica puede ser desplazada o transferida del adsorbato al adsorbente o viceversa y la hibridación con los estados electrónicos de la superficie puede modificar la densidad de estados molecular. Cada uno de estos cambios modificará las propiedades del sistema. Además, la interacción entre moléculas vecinas y la modificación de la densidad de estados electrónicos en la superficie puede afectar al proceso de autoensamblaje. El proceso de adsorción también puede estar influido por otros factores, como fuerzas de larga distancia (van der Waals), interacciones iónicas o electrostáticas y factores geométricos. La molécula adsorbida sobre la superficie puede ser fuertemente modificada durante el proceso, produciendo grandes cambios en sus propiedades electrónicas y creando un enlace químico fuerte con la superficie (quimisorción), por el contrario, el proceso de adsorción puede tener una influencia mínima en la molécula y no producir cambios de consideración sobre esta (fisisorción). Desde el punto de vista teórico la descripción de un sistema de muchos cuerpos puede ser realizada utilizando la ecuación de Schrödinger. Sin embargo, el principal problema reside en la complejidad del sistema. Para un sistema que esté constituido por más de unas pocas partículas esta ecuación se hace irresoluble en la práctica. Dado un sistema que contiene N electrones, cada uno dependiente de 3 coordenadas espaciales y una coordenada de espín, y siendo N desde unas pocas decenas hasta 1023 electrones, la ecuación de Schrödinger no puede ser resuelta de forma exacta. Es por ello que será necesario realizar aproximaciones para poder obtener las soluciones al sistema. Una alternativa para este problema fue desarrollada en los años sesenta, esta se basa en los teoremas de Hohenberg-Kohn y la ecuaciones de Kohn-Sham. La idea básica consiste en suponer que podemos describir el estado fundamental de un sistema atómico utilizando unicamente la densidad electrónica del sistema en lugar de la función de onda de muchos electrones. Este es el principio básico de la teoría del funcional de la densidad (density functional theory (DFT) en inglés). La densidad electrónica del estado fundamental del sistema se calcula, y sus propiedades física se derivan a partir de esta. Los cálculos DFT han sido utilizados desde los años setenta, sin embargo, no fue hasta principios de los años noventa cuando los recursos computacionales junto con la mejora en los métodos de cálculo convirtieron al DFT en una herramienta versátil para el estudio de la materia condensada. El incremento en la precisión permitió la correcta descripción de los sistemas físicos y ello convirtió al DFT en una metodología popular a la hora de estudiar los sistemas físicos que, conjuntamente con las observaciones experimentales, ha dado excelentes resultados. Basandonos en cálculos DFT y usando el programa de cálculo Vienna ab initio simulation package (VASP) desarrollado por Kresse et al. hemos estudiado la adsorción molecular en distintas superficies metálicas. También hemos analizado las propiedades electrónicas y estructurales de distintas superficies escalonadas., No tocante a parte institucional debo recoñecer o soporte financieiro e os recursos facilitados para o desenrolo desta tese dende UPV/EHU e o DIPC. Na miña etapa inicial como bolseiro predoutoural do programa ZabaldUz e posteriormente co apoio do centro de investigación. Así mesmo agradecer ó Ministerio de Economía, Industria y Competitividad (MINECO) no tocante ós proxectos MAT2013-46593-C6-2-P e MAT2016-78293-C6-4-R, ó Departamento de Educación do Goberno Vasco polo proxecto IT-756-13 e ó centro de investigación colaborativa "Structure and Dynamics of Internal Interfaces" (SFB 1083) financiado pola axencia alemana de investigación (DFG)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bottom-up synthesis of multifunctional nanoporous graphene

  • Moreno, César
  • Vilas-Varela, Manuel
  • Kretz, Bernhard
  • Garcia-Lekue, Aran
  • Costache, Marius V.
  • Paradinas, Markos
  • Panighel, Mirko
  • Ceballos, Gustavo
  • Valenzuela, Sergio O.
  • Peña, Diego
  • Mugarza, Aitor
Nanosize pores can turn semimetallic graphene into a semiconductor and, from being impermeable, into the most efficient molecular-sieve membrane. However, scaling the pores down to the nanometer, while fulfilling the tight structural constraints imposed by applications, represents an enormous challenge for present top-down strategies. Here we report a bottom-up method to synthesize nanoporous graphene comprising an ordered array of pores separated by ribbons, which can be tuned down to the 1-nanometer range. The size, density, morphology, and chemical composition of the pores are defined with atomic precision by the design of the molecular precursors. Our electronic characterization further reveals a highly anisotropic electronic structure, where orthogonal one-dimensional electronic bands with an energy gap of ∼1 electron volt coexist with confined pore states, making the nanoporous graphene a highly versatile semiconductor for simultaneous sieving and electrical sensing of molecular species., This research was funded by the Centres de Recerca de Catalunya Programme–Generalitat de Catalunya, the Xunta de Galicia (Centro singular de investigacion de Galicia accreditation 2016–2019, ED431G/09), and the European Regional Development Fund. This research was supported by the Spanish Ministry of Economy and Competitiveness (under contract no. MAT2016-78293-C6-2-R, MAT2016-78293-C6-3-R, MAT2016-78293-C6-4-R, and MAT2016-75952-R and Severo Ochoa no. SEV-2013-0295); the Secretariat for Universities and Research, Knowledge Department of the Generalitat de Catalunya 2014 SGR 715, 2014 SGR 56, and 2017 SGR 827; the Basque Department of Education (contract no. PI-2016-1-0027); and the European Union’s Horizon 2020 research and innovation program under grant agreement 696656. C.M. was supported by the Agency for Management of University and Research grants (AGAUR) of the Catalan government through the FP7 framework program of the European Commission under Marie Curie COFUND action 600385., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On-surface synthesis of superlattice arrays of ultra-long graphene nanoribbons

  • Moreno, César
  • Paradinas, Markos
  • Vilas-Varela, Manuel
  • Panighel, Mirko
  • Ceballos, Gustavo
  • Peña, Diego
  • Mugarza, Aitor
We report the on-surface synthesis of graphene nanoribbon superlattice arrays directed by the herringbone reconstruction of the Au(111) surface. The uniaxial anisotropy of the zigzag pattern of the reconstruction defines a one dimensional grid for directing the Ullmann polymerization and inducing periodic arrays of parallel ultra-long nanoribbons (>100 nm), where the periodicity is varied with coverage at discrete values following a hierarchical templating behavior., C. M. was supported by AGAUR through the FP7-EU under Marie Curie COFUND action 600385. M. P. acknowledges the Spanish Government for financial support through PTA2014-09788-I. Funded by the CERCA Programme/Generalitat de Catalunya. We acknowledge support from the Ministerio de Ciencia e Innovación (MAT2013-46593-C6-2-P, MAT2013-46593-C6-5-P, MAT2016-78293-C6-2-R, MAT2016-78293-C6-4-R and Severo Ochoa No. SEV-2013-0295), the EU project PAMS (610446) the Xunta de Galicia (Centro singular de investigacion de Galicia accreditation 2016–2019, ED431G/09), and the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards microscopic control of the magnetic exchange coupling at the surface of a topological insulator

  • Rüßmann, Philipp
  • Mahatha, Sanjoy K.
  • Sessi, Paolo
  • Valbuena, Miguel A.
  • Bathon, Thomas
  • Fauth, Kai
  • Godey, Sylvie
  • Mugarza, Aitor
  • Kokh, Konstantin A.
  • Tereshchenko, Oleg E.
  • Gargiani, Pierluigi
  • Valvidares, Manuel
  • Jiménez, Erika
  • Brookes, Nicholas B.
  • Bode, Matthias
  • Bihlmayer, Gustav
  • Blügel, Stefan
  • Mavropoulos, Phivos
  • Carbone, Carlo
  • Barla, Alessandro
Magnetically doped topological insulators may produce novel states of electronic matter, where for instance the quantum anomalous Hall effect state can be realized. Pivotal to this goal is a microscopic control over the magnetic state, defined by the local electronic structure of the dopants and their interactions. We report on the magnetic coupling among Mn or Co atoms adsorbed on the surface of the topological insulator Bi2Te3. Our findings uncover the mechanisms of the exchange coupling between magnetic atoms coupled to the topological surface state in strong topological insulators. The combination of x-ray magnetic circular dichroism and ab initio calculations reveals that the sign of the magnetic coupling at short adatom–adatom distances is opposite for Mn with respect to Co. For both elements, the magnetic exchange reverses its sign at a critical distance between magnetic adatoms, as a result of the interplay between superexchange, double exchange and Ruderman–Kittel–Kasuya–Yoshida interactions., PR, PM, SB, PS and MB acknowledge funding from the Priority Programme SPP-1666 Topological Insulators of the Deutsche Forschungsgemeinschaft (DFG) (projects MA4637/3-1 and BI832/2) and from the VITI Programme of the Helmholtz Association, as well as computational time at the Supercomputing Centre of the RWTH Aachen University. AB and CC acknowledge funding from MIUR (Progetto Premiale Materiali e disposivi magnetici e superconduttivi per sensoristica e ICT). MB was supported by DFG through SFB 1170 ToCoTronics (project A02). OET and KAK have been supported by the Russian Science Foundation (project No.17-12-01047). MAV, SG and AM acknowledge funding from the CERCA Programme/Generalitat de Catalunya and the Spanish Ministry of Economy and Competitiveness, MINECO (contract No. MAT2016-78293-C6-2-R and Severo Ochoa No. SEV-2013-0295). Part of the research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement No. 312284., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Critical role of phenyl substitution and catalytic substrate on the surface-assisted polymerization of dibromobianthracene derivatives

  • Moreno, César
  • Panighel, Mirko
  • Vilas-Varela, Manuel
  • Sauthier, Guillaume
  • Tenorio, Maria
  • Ceballos, Gustavo
  • Peña, Diego
  • Mugarza, Aitor
Understanding the nature and hierarchy of on-surface reactions is a major challenge for designing coordination and covalent nanostructures by means of multistep synthetic routes. In particular, intermediates and final products are hard to predict since the reaction paths and their activation windows depend on the choice of both the molecular precursor design and the substrate. Here, we report a systematic study of the effect of the catalytic metal surface to reveal how a single precursor can give rise to very distinct polymers that range from coordination and covalent nonplanar polymer chains of distinct chirality to atomically precise graphene nanoribbons and nanoporous graphene. Our precursor consists on adding two phenyl substituents to 10,10′-dibromo-9,9′-bianthracene, a well-studied precursor in the on-surface synthesis of graphene nanoribbons. The critical role of the monomer design in the reaction paths is inferred from the fact that the phenyl substitution leads to very distinct products in each one of the studied metallic substrates., C.M. was supported by the Agency for Management of University and Research grants (AGAUR) of the Catalan government through the FP7 framework program of the European Commission under Marie Curie COFUND action 600385. Funded by the CERCA Program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). We acknowledge support from the Ministerio de Ciencia e Innovación (MAT2013-46593-C6-2-P, MAT2013-46593-C6-5-P, MAT2016-78293-C6-2-R, MAT2016-78293-C6-4-R), the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (Contract No. EFA 194/16 TNSI), the EU project PAMS (610446) the Xunta de Galicia (Centro singular de investigacion de Galicia accreditation 2016–2019, ED431G/09), and the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hierarchy in the halogen activation during surface-promoted ullmann coupling

  • Merino-Díez, Nestor
  • Pérez Paz, Alejandro
  • Li, Jingcheng
  • Vilas-Varela, Manuel
  • Lawrence, James
  • Mohammed, Mohammed S. G.
  • Berdonces-Layunta, Alejandro
  • Barragán, Ana
  • Pascual, José I.
  • Lobo-Checa, Jorge
  • Peña, Diego
  • Oteyza, Dimas G. de
Within the collection of surface-supported reactions currently accessible for the production of extended molecular nanostructures under ultra-high vacuum, Ullmann coupling has been the most successful in the controlled formation of covalent single C−C bonds. Particularly advanced control of this synthetic tool has been obtained by means of hierarchical reactivity, commonly achieved by the use of different halogen atoms that consequently display distinct activation temperatures. Here we report on the site-selective reactivity of certain carbon-halogen bonds. We use precursor molecules halogenated with bromine atoms at two non-equivalent carbon atoms and found that the Ullmann coupling occurs on Au(111) with a remarkable predilection for one of the positions. Experimental evidence is provided by means of scanning tunneling microscopy and core level photoemission spectroscopy, and a rationalized understanding of the observed preference is obtained from density functional theory calculations., The project leading to this publication has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement No 635919), from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, Grant Nos. MAT2016‐78293‐C6‐R) and María de Maeztu Units of Excellence Program MDM‐2026‐0618. We also acknowledge financial support from the Xunta de Galicia (Centro singular de investigación de Galicia, accreditation 2016–2019, ED431G/09) and Fondo Europeo de Desarrollo Regional (FEDER). This work used the “Imbabura” computer cluster of Yachay Tech University, which was purchased under contract No. 2017‐024 (SIE‐UITEY‐007‐2017)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Real space manifestations of coherent screening in atomic scale Kondo lattices

  • Moro-Lagares, María
  • Korytár, Richard
  • Piantek, Marten
  • Robles, Roberto
  • Lorente, Nicolás
  • Pascual, José I.
  • Ibarra, M. Ricardo
  • Serrate, David
The interaction among magnetic moments screened by conduction electrons drives quantum phase transitions between magnetically ordered and heavy-fermion ground states. Here, starting from isolated magnetic impurities in the Kondo regime, we investigate the formation of the finite size analogue of a heavy Fermi liquid. We build regularly-spaced chains of Co adatoms on a metallic surface by atomic manipulation. Scanning tunneling spectroscopy is used to obtain maps of the Kondo resonance intensity with sub-atomic resolution. For sufficiently small interatomic separation, the spatial distribution of Kondo screening does not coincide with the position of the adatoms. It also develops enhancements at both edges of the chains. Since we can rule out any other interaction between Kondo impurities, this is explained in terms of the indirect hybridization of the Kondo orbitals mediated by a coherent electron gas, the mechanism that causes the emergence of heavy quasiparticles in the thermodynamic limit., Financial support was provided by the Spanish Plan Nacional de I+D+i (grants MAT 2013-46593-C6-3-P, MAT2016-78293-C6-6-R, MAT2015-66888-C3-2-R, and FIS2015-64886-C5-3-P), Charles University (programme PRIMUS/Sci/09) and the European Union through programmes Interreg-POCTEFA (grant TNSI/EFA194/16) and H2020-EINFRA-5-2015 MaX Center of Excellence (grant no. 676598). M.M.-L., M.P., and D.S. acknowledge the use of SAI at Universidad de Zaragoza. R.R. acknowledges The Severo Ochoa Centers of Excellence Program (grant no. SEV-2017-0706) and Generalitat de Catalunya (grant no. 2017SGR1506 and the CERCA Programme)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Tunable energy and mass renormalization from homothetic Quantum dot arrays

  • Piquero-Zulaica, Ignacio
  • Li, Jun
  • Abd El-Fattah, Zakaria M.
  • Solianyk, Leonid
  • Gallardo, Iker
  • Monjas, Leticia
  • Hirsch, Anna K. H.
  • Arnau, Andrés
  • Ortega, J. Enrique
  • Stöhr, Meike
  • Lobo-Checa, Jorge
Trabajo presentado al 32nd Symposium on Surface Science (3S'19), celebrado en Baqueira Beret, Lleida (España) del 10 al 16 de marzo de 2019., Support by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, Grant No. MAT2016-78293-C6-6-R) from the regional Government of Aragón (RASMIA project) and from the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (Contract No. EFA 194/16 TNSI) is thankfully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Atomically resolved magnetic structure of a Gd-Au surface alloy

  • Bazarnik, Maciej
  • Abadia, Mikel
  • Brede, Jens
  • Hermanowicz, M.
  • Sierda, Emil
  • Elsebach, Micha
  • Hänke, Torben
  • Wiesendanger, Roland
The magnetic structure of a monolayer-thick GdAu2 surface alloy on Au(111) has been investigated down to the atomic level by spin-polarized scanning tunneling microscopy. Spin-resolved tunneling spectroscopy combined with density-functional theory calculations reveal the local spin polarization of both Gd and Au atomic sites within the surface alloy. Moreover, the impact of dislocation lines on the atomic-scale magnetic structure as well as on the local coercive field strength is demonstrated., We gratefully acknowledge financial support from the Office of Naval Research via Grant No. N00014-16-1-2900. Moreover, M.A. and J.B. acknowledge funding from the Spanish MINECO under Contracts No. MAT2013-46593-C6- 4-P and No. MAT2016-78293-C6-5-R as well as the Basque Government Grants No. IT621-13 and No. IT-756-13. T.H. acknowledges support by the DFG under Grant No. HA 6037/2-1. E.S. acknowledges financing from Polish budget funds for science in 2014–2017 as a research project in the program “Diamond Grant” No. 0084/DIA/2014/43. M.H. acknowledges the support from the Ministry of Science and Higher Education in Poland within Project realized at Faculty of Technical Physics, Poznan University of Technology, and Poznan Supercomputing and Networking Center (PSNC)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Boron nitride monolayer growth on vicinal Ni(1 1 1) surfaces systematically studied with a curved crystal

  • Fernández, Laura
  • Makarova, Anna A.
  • Laubschat, Clemens
  • Vyalikh, Denis V.
  • Usachov, Dmitry Yu.
  • Ortega, J. Enrique
  • Schiller, Frederik
The structural and electronic properties of hexagonal boron nitride (hBN) grown on stepped Ni surfaces are systematically investigated using a cylindrical Ni crystal as a tunable substrate. Our experiments reveal homogeneous hBN monolayer coating of the entire Ni curved surface, which in turn undergoes an overall faceting. The faceted system is defined by step-free hBN/Ni(1 1 1) terraces alternating with strongly tilted hBN/Ni(1 1 5) or hBN/Ni(1 1 0) nanostripes, depending on whether we have A-type or B-type vicinal surfaces, respectively. Such deep substrate self-organization is explained by both the rigidity of the hBN lattice and the lack of registry with Ni crystal planes in the vicinity of the (1 1 1) surface. The analysis of the electronic properties by photoemission and absorption spectroscopies reveal a weaker hBN/Ni interaction in (1 1 0)- and (1 1 5)-oriented facets, as well as an upward shift of the valence band with respect to the band position at the hBN/Ni(1 1 1) terrace., We acknowledge financial support from the Deutsches Forschungsgemein chaft DFG (Grants LA655-17/1 and LA655-19/1), the Spanish Ministry of Economy (Grants MAT-2016-78293-C6, MAT-2017-88374-P), the Basque Government (Grant IT-1255-19), the Helmholtz-Zentrum Berlin für Materialien und Energie for support within the bilateral RussianGerman Laboratory program as well as from the joint project of the Russian Science Foundation (project 16-42-01093) and DFG (Grant No. LA655-17/1). DYuU acknowledges St. Petersburg State University for research Grant No. 11.65.42.2017 and Russian Foundation for Basic Research RFBR (Project No. 17-02-00427).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Can atomic buckling control a chemical reaction? The case of Dehydrogenation of Phthalocyanine Molecules on GdAu2/Au(111)

  • Farnesi Camellone, Matteo
  • Correa, Ana
  • Barragán, Ana
  • Pedio, Maddalena
  • Fabris, Stefano
  • Cepek, Cinzia
  • Vitali, Lucia
The efficiency of chemical reactions on surfaces is traditionally related to their lattice structures. The periodic out-of-plane lattice distortions of supported two-dimensional layers offer an alternative strategy to surface functionalization, scarcely investigated so far. Here, we show that the variable buckling geometry of a GdAu2 Moiré overlayer supported on the Au(111) surface exposes specific single-atom sites that control the dehydrogenation process of phthalocyanine (H2-PC) molecules, limiting their reactivity to about 1/3 of the monolayer. The lattice mismatch between the substrate and the alloy layer leads to the previously reported outward displacement of distinct Gd sites. We show that these atomic sites promote the selective dehydrogenation of H2-PC molecules., This project has received funding from the EU-H2020 research and innovation program (grant number 654360) having benefitted from the access provided by Istituto Officina dei Materiali in Trieste (Italy) within the framework of the NFFA Transnational Access Activity. L.V., A.B., and A.C. acknowledge the economic support of the Spanish Ministry of Economy, Industry and Competitiveness (grant number MAT2016-78293-C6-5-R) and Prof. S. Modesti for his help with the electronics. A.B. acknowledges Vicerrectorado de Investigacion of the University of the Basque Country (UPV/ EHU) for the PhD fellowship (2016)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Controlling a chemical coupling reaction on a surface: tools and strategies for on-surface synthesis

  • Clair, Sylvain
  • Oteyza, Dimas G. de
On-surface synthesis is appearing as an extremely promising research field aimed at creating new organic materials. A large number of chemical reactions have been successfully demonstrated to take place directly on surfaces through unusual reaction mechanisms. In some cases the reaction conditions can be properly tuned to steer the formation of the reaction products. It is thus possible to control the initiation step of the reaction and its degree of advancement (the kinetics, the reaction yield); the nature of the reaction products (selectivity control, particularly in the case of competing processes); as well as the structure, position, and orientation of the covalent compounds, or the quality of the as-formed networks in terms of order and extension. The aim of our review is thus to provide an extensive description of all tools and strategies reported to date and to put them into perspective. We specifically define the different approaches available and group them into a few general categories. In the last part, we demonstrate the effective maturation of the on-surface synthesis field by reporting systems that are getting closer to application-relevant levels thanks to the use of advanced control strategies., Financial support from Centre National de la Recherche Scientifique (CNRS), Aix-Marseille University, and Agence Nationale de la Recherche (ANR grant ANR-17-CE08-0010 “DUALITY”, ANR grant ANR-16-JTIC-0002 “PHOTONET”), as well as from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement 635919) and from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant MAT2016-78293-C6), is acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Controlling the stereospecific bonding motif of Au-thiolate links

  • Colazzo, Luciano
  • Mohammed, Mohammed S. G.
  • Gallardo, Aurelio
  • Abd El-Fattah, Zakaria M.
  • Pomposo, José A.
  • Jelinek, Pavel
  • Oteyza, Dimas G. de
Over the last decades, organosulfur compounds at the interface of noble metals have proved to be extremely versatile systems for both fundamental and applied research. However, the anchoring of thiols to gold remained an object of controversy for a long time. The RS-Au-SR linkage, in particular, is a robust bonding configuration that displays interesting properties. It is generated spontaneously at room temperature and can be used for the production of extended molecular nanostructures. In this work we explore the behavior of 1,4-bis(4-mercaptophenyl)benzene (BMB) on the Au(111) surface, which results in the formation of 2D crystalline metal-organic assemblies stabilized by this type of Au-thiolate bonds. We show how to control the thiolate's stereospecific bonding motif and thereby choose whether to form ordered arrays of AuBMB units with embedded triangular nanopores or linearly stacked metal-organic chains. The former turn out to be thermodynamically favored structures and display confinement of the underneath Au(111) surface state. The electronic properties of single molecules as well as of the 2D crystalline self-assemblies have been characterized both on the metal-organic backbone and inside the associated pores., The project leading to this publication has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No 635919) and from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, Grant No. MAT2016-78293-C6-1-R). P. J. and A. C. acknowledge the support from Praemium Academie of the Academy of Science of the Czech Republic, MEYS M2015087 and GACR 18-09914S and Operational Programme Research, Development and Education financed by the European Structural and Investment Funds and the Czech Ministry of Education, Youth and Sports (Project No. Z.02.1.01/0.0/0.0/ 16_019/0000754). ZMA acknowledges Prof. Javier Garcia de Abajo for providing the EBEM-EPWE package.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effective determination of surface potential landscapes from metal-organic nanoporous network overlayers

  • Piquero-Zulaica, Ignacio
  • Abd El-Fattah, Zakaria M.
  • Popova, Olha
  • Kawai, Shigeki
  • Nowakowska, Sylwia
  • Matena, Manfred
  • Enache, M.
  • Stöhr, Meike
  • Tejeda, A.
  • Taleb, Amina
  • Meyer, Ernst
  • Ortega, J. Enrique
  • Gade, Lutz H.
  • Jung, Thomas A.
  • Lobo-Checa, Jorge
Determining the scattering potential landscape for two-dimensional superlattices provides key insight into fundamental quantum electron phenomena. Theoretical and semiempirical methods have been extensively used to simulate confinement effects of the two-dimensional electron gas (2DEG) on superlattices with a single scatterer in the form of vicinal surfaces and dislocation networks or isolated structures such as quantum corrals and vacancy islands. However, the complexity of the problem increases when the building blocks (or scatterers) are heterogeneous, as in metal-organic nanoporous networks (MONNs), since additional potentials may come into play. Therefore, the parametrization of the surface potential landscape is often inaccurate, leading to incorrect scattering potentials. Here, we address this issue with a combination of scanning tunneling microscopy/spectroscopy, angle resolved photoemission spectroscopy and Kelvin probe force microscopy measurements together with electron plane-wave expansion simulations on a MONN grown on Cu(111). This experimental-Theory approach, enables us to capture the 2DEG response to the intricate scattering potential landscape, and reveals systematic modeling procedures. Starting from a realistic geometry of the system, we determine the repulsive scattering potentials for both molecules and coordinated metal adatoms, the latter contradicting the established simulation framework. Moreover, we reveal local asymmetries and subtle renormalization effects of the 2DEG that relate to the interaction of the MONN and the underlying substrate., We acknowledge the financial support from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, Grant No. MAT2016-78293-C6), from the Basque Government (Grant No. IT-1255-19), from the regional Government of Aragon (RASMIA project). Part of this work has been performed at the SOLEIL synchrotron at the CASSIOPEE beamline under proposal 20080787. We acknowledge support by the Deutsche Forschungsgemeinschaft (SFB 1249, TP A2 to LHG). SK acknowledges support by Japan Society for the Promotion of Science (JSPS)KAKENHI Grant Number 15K21765. We also acknowledge funding by the Paul Scherrer Institute, the Physics Department of the University of Basel and the Swiss Nanoscience Institute, the Swiss National Science Foundation (Grants # 200020_162512, 206021_144991, 206021_121461) and the Swiss Commission for Technology and Innovation (CTI, 16 465.1 PFNM-NM).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrically Addressing the Spin of a Magnetic Porphyrin through Covalently Connected Graphene Electrodes

  • Li, Jingcheng
  • Friedrich, Niklas
  • Merino, Nelson
  • Oteyza, Dimas G. de
  • Peña, Diego
  • Jacob, David
  • Pascual, José I.
We report on the fabrication and transport characterization of atomically precise single-molecule devices consisting of a magnetic porphyrin covalently wired by graphene nanoribbon electrodes. The tip of a scanning tunneling microscope was utilized to contact the end of a GNR-porphyrin-GNR hybrid system and create a molecular bridge between the tip and sample for transport measurements. Electrons tunneling through the suspended molecular heterostructure excited the spin multiplet of the magnetic porphyrin. The detachment of certain spin centers from the surface shifted their spin-carrying orbitals away from an on-surface mixed-valence configuration, recovering its original spin state. The existence of spin-polarized resonances in the free-standing systems and their electrical addressability is the fundamental step in the utilization of carbon-based materials as functional molecular spintronics systems., We acknowledge financial support from Spanish AEI (MAT2016-78293-C6 and the Maria de Maeztu Units of Excellence Programme MDM-2016-0618), EU project PAMS (610446), the Xunta de Galicia (Centro Singular de Investigacion de Galicia accreditation 2016-2019, ́ED431G/09), and the European Regional Development Fund (ERDF).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electronic transport in planar atomic-scale structures measured by two-probe scanning tunneling spectroscopy

  • Kolmer, Marek
  • Brandimarte, Pedro
  • Lis, Jakub
  • Zuzak, Rafał
  • Godlewski, Szymon
  • Kawai, Hiroyo
  • Garcia-Lekue, Aran
  • Lorente, Nicolás
  • Frederiksen, Thomas
  • Joachim, Christian
  • Sánchez-Portal, Daniel
  • Szymonski, Marek
Miniaturization of electronic circuits into the single-atom level requires novel approaches to characterize transport properties. Due to its unrivaled precision, scanning probe microscopy is regarded as the method of choice for local characterization of atoms and single molecules supported on surfaces. Here we investigate electronic transport along the anisotropic germanium (001) surface with the use of two-probe scanning tunneling spectroscopy and first-principles transport calculations. We introduce a method for the determination of the transconductance in our two-probe experimental setup and demonstrate how it captures energy-resolved information about electronic transport through the unoccupied surface states. The sequential opening of two transport channels within the quasi-one-dimensional Ge dimer rows in the surface gives rise to two distinct resonances in the transconductance spectroscopic signal, consistent with phase-coherence lengths of up to 50 nm and anisotropic electron propagation. Our work paves the way for the electronic transport characterization of quantum circuits engineered on surfaces., This work was supported by the FP7 FET-ICT “Planar Atomic and Molecular Scale devices” (PAMS) project (funded by the European Commission under contract number 610446), the Polish Ministry for Science and Higher Education from financial resources for science in 2013–2017 granted for an international co-financed project (contract number 2913/7.PR/2013/2) and the Spanish Ministerio de Economía y Competitividad (MINECO) (Grant Numbers MAT2016-78293-C6-4-R and FIS2017-83780-P). M.K. acknowledges financial support received from the Polish Ministry of Science and Higher Education, contract number 0341/IP3/2016/74.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graphene: Free electron scattering within an inverted honeycomb lattice

  • Abd El-Fattah, Zakaria M.
  • Kher-Elden, Mohammad A.
  • Piquero-Zulaica, Ignacio
  • García de Abajo, Francisco Javier
  • Ortega, J. Enrique
Theoretical progress in graphene physics has largely relied on the application of a simple nearest-neighbor tight-binding model capable of predicting many of the electronic properties of this material. However, important features that include electron-hole asymmetry and the detailed electronic bands of basic graphene nanostructures (e.g., nanoribbons with different edge terminations) are beyond the capability of such a simple model. Here we show that a similarly simple plane-wave solution for the one-electron states of an atom-based two-dimensional potential landscape, defined by a single fitting parameter (the scattering potential), performs better than the standard tight-binding model, and levels to density-functional theory in correctly reproducing the detailed π-band structure of a variety of graphene nanostructures. In particular, our approach identifies the three hierarchies of nonmetallic armchair nanoribbons, as well as the doubly-degenerate flat bands of free-standing zigzag nanoribbons with their energy splitting produced by symmetry breaking. The present simple plane-wave approach holds great potential for gaining insight into the electronic states and electro-optical properties of graphene nanostructures and other two-dimensional materials with intact or gapped Dirac-like dispersions., This work has been supported in part by the Spanish MINECO (Grants No. MAT2014-59096-P, No. MAT2016-78293-C6, No. MAT-2017-88374-P, No. MAT2017-88492-R, and No. SEV2015-0522), the Basque Government (Grant No. IT-1255-19), the European Research Council (Advanced Grant No. 789104-eNANO), the European Commission (Graphene Flagship 696656), the Catalan CERCA Program, Fundació Privada Cellex, and AGAUR (Grant No. 2017 SGR 1651).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Introducing the concept of pulsed vapor phase copper-free surface click-chemistry using the ALD technique

  • Saric, Iva
  • Peter, Robert
  • Kolympadi, M.
  • Jelovica Badovinac, Ivana
  • Rogero, Celia
  • Ilyn, Max
  • Knez, Mato
  • Ambrožić, Gabriela
We report for the first time on a pulsed vapor phase copper-free azide-alkyne click reaction on ZnO by using the atomic layer deposition (ALD) process technology. This reproducible and fast method is based on an in situ two-step reaction consisting of sequential exposures of ZnO to propiolic acid and benzyl azide., This work was mainly supported by the Croatian Science Foundation under project IP-2016-06-3568, and in part by the University of Rijeka under project number 16.12.2.1.01.The characterization instruments used in this work were acquired through the European Fund for Regional Development and the Ministry of Science, Education and Sports of the Republic of Croatia under the project Research Infrastructure for Campusbased Laboratories at the University of Rijeka (grant number RC.2.2.06-0001). Mato Knez and Celia Rogero are grateful for funding from the Spanish Ministry of Economy and Competitiveness (grant MAT2016-77393-R and MAT2016-78293-C6-5-R, including FEDER funds). Mato Knez acknowledges the Maria de Maeztu Units of Excellence Programme – MDM-2016-0618, and Celia Rogero acknowledges the Interreg POCTEFA V-A Spain–France–Andorra Program (EFA 194/16/TNSI) partly financed by ERDF funds. The authors acknowledge networking support within the COST action HERALD (MP1402).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Plasmonics in atomically thin crystalline silver films

  • Abd El-Fattah, Zakaria M.
  • Mkhitaryan, Vahagn
  • Brede, Jens
  • Fernández, Laura
  • Li, Cheng
  • Guo, Qiushi
  • Ghosh, Arnab
  • RodrÍguez Echarri, A.
  • Naveh, Doron
  • Xia, Fengnian
  • Ortega, J. Enrique
  • García de Abajo, Francisco Javier
Light-matter interaction at the atomic scale rules fundamental phenomena such as photoemission and lasing while enabling basic everyday technologies, including photovoltaics and optical communications. In this context, plasmons, the collective electron oscillations in conducting materials, are important because they allow the manipulation of optical fields at the nanoscale. The advent of graphene and other two-dimensional crystals has pushed plasmons down to genuinely atomic dimensions, displaying appealing properties such as a large electrical tunability. However, plasmons in these materials are either too broad or lying at low frequencies, well below the technologically relevant near-infrared regime. Here, we demonstrate sharp near-infrared plasmons in lithographically patterned wafer-scale atomically thin silver crystalline films. Our measured optical spectra reveal narrow plasmons (quality factor of ∼4), further supported by a low sheet resistance comparable to bulk metal in few-atomic-layer silver films down to seven Ag(111) monolayers. Good crystal quality and plasmon narrowness are obtained despite the addition of a thin passivating dielectric, which renders our samples resilient to ambient conditions. The observation of spectrally sharp and strongly confined plasmons in atomically thin silver holds great potential for electro-optical modulation and optical sensing applications., This work has been supported in part by ERC (Advanced Grant 789104-eNANO), the Spanish MINECO (MAT2017-88492-R, SEV2015-0522, and PCIN-2015-155, and MAT2016-78293-C6-6-R), the Catalan CERCA Program, the Basque Government (IT-1255- 19), Fundació Privada Cellex, and the US National Science Foundation CAREER Award (1552461)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

PySCF-NAO: an efficient and flexible implementation of linear response time-dependent density functional theory with numerical atomic orbitals

  • Koval, Peter
  • Barbry, Marc
  • Sánchez-Portal, Daniel
We present an algorithm and its implementation to calculate the properties of electronic excitations in molecules and clusters from first principles, using time-dependent density functional theory (TDDFT). The algorithm assumes the use of some localized functions as a basis set to represent the spatial degrees of freedom. It relies on an iterative computation of the induced density according to the Dyson-like equation for the linear response function. The current implementation is built upon so-called numerical atomic orbitals. It is suitable for a wide variety of density functional theory (DFT) software. In this work, we demonstrate TDDFT calculations starting from preceding DFT runs with SIESTA, GPAW and PySCF packages, while a coupling with the other DFT packages such as Fireball and OpenMX is planned. The mentioned packages are capable of performing ab initio molecular dynamics simulations, and the speed of our TDDFT implementation makes feasible to perform a configuration average of the optical absorption spectra. Our code is written mostly in Python language allowing for a quick and compact implementation of most numerical methods and data-managing tasks with the help of NumPy/SciPy libraries and Python intrinsic constructs. Part of the code is written in C and Fortran to achieve a competitive speed in particular sections of the algorithm. Many parts of the current algorithm and implementation are useful in other ab initio methods for electronic excited states, such as Hedin¿s GW, Bethe¿Salpeter equation and DFT with hybrid functionals. Corresponding proof-of-principles implementations are already part of the code., PK and DSP acknowledge support from Spanish MINECO Grants MAT2016-78293-C6-4-R and RTC-2016-5681-7 (SIESTA-PRO). PKacknowledges financial support from the Fellows Gipuzkoa program of the Gipuzkoako Foru Aldundia through the FEDER fundings cheme of the European Union.MB acknowledges support from the Departemento de Educación of the Basque Government through aPhD grant, as well as from Euskampus and the DIPC at the initial stages of this work
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Single spin localization and manipulation in graphene open-shell nanostructures

  • Li, Jingcheng
  • Sanz, Sofía
  • Corso, Martina
  • Choi, Deung-Jang
  • Peña, Diego
  • Frederiksen, Thomas
  • Pascual, José I.
Turning graphene magnetic is a promising challenge to make it an active material for spintronics. Predictions state that graphene structures with specific shapes can spontaneously develop magnetism driven by Coulomb repulsion of π-electrons, but its experimental verification is demanding. Here, we report on the observation and manipulation of individual magnetic moments in graphene open-shell nanostructures on a gold surface. Using scanning tunneling spectroscopy, we detect the presence of single electron spins localized around certain zigzag sites of the carbon backbone via the Kondo effect. We find near-by spins coupled into a singlet ground state and quantify their exchange interaction via singlet-triplet inelastic electron excitations. Theoretical simulations picture how electron correlations result in spin-polarized radical states with the experimentally observed spatial distributions. Extra hydrogen atoms bound to radical sites quench their magnetic moment and switch the spin of the nanostructure in half-integer amounts. Our work demonstrates the intrinsic π-paramagnetism of graphene nanostructure, We acknowledge financial support from Spanish AEI (MAT2016-78293-C6, FIS2017-83780-P, and the Maria de Maeztu Units of Excellence Program MDM-2016-0618), the Basque Government (Department of Education, Grant PI-2015-1-42), the EU project PAMS (610446), the Xunta de Galicia (Centro singular de investigación de Galicia accreditation 2016- 2019, ED431G/09), and the European Regional Development Fund (ERDF).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surface state tunable energy and mass renormalization from homothetic quantum dot arrays

  • Piquero-Zulaica, Ignacio
  • Li, Jun
  • Abd El-Fattah, Zakaria M.
  • Solianyk, Leonid
  • Gallardo, Iker
  • Monjas, Leticia
  • Hirsch, Anna K. H.
  • Arnau, Andrés
  • Ortega, J. Enrique
  • Stöhr, Meike
  • Lobo-Checa, Jorge
Quantum dot arrays in the form of molecular nanoporous networks are renowned for modifying the electronic surface properties through quantum confinement. Here we show that, compared to the pristine surface state, the band bottom of the confined states can exhibit downward shifts accompanied by a lowering of the effective masses simultaneous to the appearance of tiny gaps at the Brillouin zone boundaries. We observed these effects by angle resolved photoemission for two self-Assembled homothetic (scalable) Co-coordinated metal-organic networks. Complementary scanning tunneling spectroscopy measurements confirmed these findings. Electron plane wave expansion simulations and density functional theory calculations provide insight into the nature of this phenomenon, which we assign to metal-organic overlayer-substrate interactions in the form of adatom-substrate hybridization. To date, the absence of the experimental band structure resulting from single metal adatom coordinated nanoporous networks has precluded the observation of the significant surface state renormalization reported here, which we infer to be general for low interacting and well-defined adatom arrays., We acknowledge Prof. J. García de Abajo for providing the EPWE code and the financial support from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, Grant No. MAT2016-78293-C6 and FIS2016-75862-P), from the Basque Government (Grant No. IT-1255-19 and IT-756-13), from the Regional Government of Aragon (RASMIA project), from the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (Contract No. EFA 194/16 TNSI) and from the European Research Council (ERC-2012-StG 307760-SURFPRO)., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electron transmission through coordinating atoms embedded in metal-organic nanoporous networks

  • Piquero-Zulaica, Ignacio
  • Sadeghi, Ali
  • Kherelden, Mohammad
  • Hua, Muqing
  • Liu, Jing
  • Kuang, Guowen
  • Yan, Linghao
  • Ortega, J. Enrique
  • Abd El-Fattah, Zakaria M.
  • Azizi, Behnam
  • Lin, Nian
  • Lobo-Checa, Jorge
On-surface metal-organic nanoporous networks generally refer to adatom coordinated molecular arrays, which are characterized by the presence of well-defined and regular nanopores. These periodic structures constructed using two types of components confine the surface electrons of the substrate within their nanocavities. However, the confining (or scattering) strength that individual building units exhibit is a priori unknown. Here, we study the modification of the substrate’s surface electrons by the interaction with a Cu-coordinated TPyB metal-organic network formed on Cu(111) and disentangle the scattering potentials and confinement properties. By means of STM and angle-resolved photoemission spectroscopy we find almost unperturbed free-electron-like states stemming from the rather weak electron confinement that yields significant coupling between adjacent pores. Electron plane wave expansion simulations match the superlattice induced experimental electronic structure, which features replicating bands and energy renormalization effects. Notably, the electrostatic potential landscape obtained from our ab initio calculations suggests that the molecules are the dominant scattering entities while the coordination metal atoms sandwiched between them act as leaky channels. These metal atom transmission conduits facilitate and enhance the coupling among quantum dots, which are prone to be exploited to engineer the electronic structure of surface electron gases., Financial support is acknowledged from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, Grants No. MAT2016-78293-C6 and No. FIS2016-75862-P), from the regional Government of Aragon (Grant No. E12-17R), from the Basque Government (Grant No. IT-1255-19), from the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (Contract No. EFA 194/16 TNSI) and from the Hong Kong RGC 16304016., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Neutral organic radical formation by chemisorption on metal surfaces

  • Ajayakumar, Murugan
  • Moreno, César
  • Alcón, Isaac
  • Illas, Francesc
  • Rovira, Concepció
  • Veciana, Jaume
  • Bromley, Stefan T.
  • Mugarza, Aitor
  • Mas Torrent, Marta
Organic radical monolayers (r-MLs) bonded to metal surfaces are potential materials for the development of molecular (spin)electronics. Typically, stable radicals bearing surface anchoring groups are used to generate r-MLs. Following a recent theoretical proposal based on a model system, we report the first experimental realization of a metal surface-induced r-ML, where a rationally chosen closed-shell precursor 3,5-dichloro-4-[bis(2,4,6-trichlorophenyl)methylen]cyclohexa-2,5-dien-1-one (1) transforms into a stable neutral open-shell species (1•) via chemisorption on the Ag(111) surface. X-ray photoelectron spectroscopy reveals that the >C═O group of 1 reacts with the surface, forming a C–O–Ag linkage that induces an electronic rearrangement that transforms 1 to 1•. We further show that surface reactivity is an important factor in this process whereby Au(111) is inert towards 1, whereas the Cu(111) surface leads to dehalogenation reactions. The radical nature of the Ag(111)-bound monolayer was further confirmed by angle-resolved photoelectron spectroscopy and electronic structure calculations, which provide evidence of the emergence of the singly occupied molecular orbital (SOMO) of 1•., This work was funded by ERC StG 2012-306826 e-GAMES, the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (contract no. EFA 194/16 TNSI), the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBERBBN), the Spanish Ministry of Economy and Competitiveness (MINECO/FEDER) through projects FANCY CTQ2016-80030-R, RTI2018-095460-B-I00 and MAT2016-78293-C6-2-R, the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV-2015-0496 and SEV-2017-0706), and the “Maria de Maeztu” program for Spanish Structures of Excellence (MDM-2017-0767). This research was also supported in part by Generalitat de Catalunya (grants 2017SGR13 and 2017SGR918). Computational time was provided by through grants from the Red Española de Supercomputacion. I.A. acknowledges the Spanish Ministerio de Educacion Cultura y Deporte for an FPU Ph.D. scholarship, and F.I. acknowledges additional support from a 2015 ICREA Academia Award. This research was also funded by the CERCA Programme/Generalitat de Catalunya. C.M. was supported by the Agency for Management of University and Research grants (AGAUR) of the Catalan government through the FP7 framework program of the European Commission under Marie Curie COFUND action 600385., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Band depopulation of graphene nanoribbons induced by chemical gating with amino groups

  • Li, Jingcheng
  • Brandimarte, Pedro
  • Vilas-Varela, Manuel
  • Merino-Díez, Nestor
  • Moreno, César
  • Mugarza, Aitor
  • Sáez Mollejo, Jaime
  • Sánchez-Portal, Daniel
  • Oteyza, Dimas G. de
  • Corso, Martina
  • Garcia-Lekue, Aran
  • Peña, Diego
  • Pascual, José I.
The electronic properties of graphene nanoribbons (GNRs) can be precisely tuned by chemical doping. Here we demonstrate that amino (NH2) functional groups attached at the edges of chiral GNRs (chGNRs) can efficiently gate the chGNRs and lead to the valence band (VB) depopulation on a metallic surface. The NH2-doped chGNRs are grown by on-surface synthesis on Au(111) using functionalized bianthracene precursors. Scanning tunneling spectroscopy resolves that the NH2 groups significantly upshift the bands of chGNRs, causing the Fermi level crossing of the VB onset of chGNRs. Through density functional theory simulations we confirm that the hole-doping behavior is due to an upward shift of the bands induced by the edge NH2 groups., We acknowledge financial support from (i) AEI/FEDER-EU through grant nos. MAT2016-78293-C6, FIS2017-83780-P AEI/FEDER, EU, the Maria de Maeztu unit of excellence MDM-2016-0618, and the Severo Ochoa program (ICN2) SEV-2017-0706; (ii) the European Research Council (grant agreement no. 635919); (iii) the Xunta de Galicia (Centro Singular De Investigacion de Galicia, accreditation 2016-2019, ED431G/09); (iv) the European FET-OPEN project SPRING (#863098); (v) the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (contract no. EFA 194/16 TNI); (vi) the CERCA Program/Generalitat de Catalunya; (vii) the Gobierno Vasco UPV/EHU (project IT1246-19); (viii) Basque Government Project (IT-1255-19); and (ix) Diputacion Foral De Gipuzkoa RED 2019-096., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Keto–enol tautomerization drives the self-assembly of leucoquinizarin on Au(111)

  • Costantini, Giovanni
  • Colazzo, Luciano
  • Batini, Laura
  • Stredansky, Matus
  • Mohammed, Mohammed S. G.
  • Achilli, S.
  • Floreano, Luca
  • Fratesi, Guido
  • Oteyza, Dimas G. de
  • Cossaro, Albano
The self-assembly of leucoquinizarin molecules on Au(111) surfaces is shown to be characterized by the molecules mostly being in their keto–enolic tautomeric form, with evidence of their temporary switching to other tautomeric forms. This reveals a metastable chemistry of the assembled molecules, to be considered for their possible employment in the formation of more complex hetero-organic interfaces., We acknowledge: the CINECA award under the ISCRA initiative (Grant No. HP10CB0ZW2), the MIUR SIR grant SUNDYN (RBSI14G7TL, CUP B82I15000910001), and funding from the European Union's Horizon 2020 programme (Grant Agreement No. 635919) and from the Spanish MINECO (Grant No. MAT2016-78293-C6)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Molecular approach for engineering interfacial interactions in magnetic/topological insulator heterostructures

  • Cuxart, M. G.
  • Valbuena, Miguel A.
  • Robles, Roberto
  • Moreno, César
  • Bonell, Fréderic
  • Sauthier, Guillaume
  • Imaz, Inhar
  • Xu, Heng
  • Nistor, Corneliu
  • Gargiani, Pierluigi
  • Valvidares, Manuel
  • Maspoch, Daniel
  • Gambardella, Pietro
Controlling interfacial interactions in magnetic/topological insulator heterostructures is a major challenge for the emergence of novel spin-dependent electronic phenomena. As for any rational design of heterostructures that rely on proximity effects, one should ideally retain the overall properties of each component while tuning interactions at the interface. However, in most inorganic interfaces, interactions are too strong, consequently perturbing, and even quenching, both the magnetic moment and the topological surface states at each side of the interface. Here, we show that these properties can be preserved using ligand chemistry to tune the interaction of magnetic ions with the surface states. By depositing Co-based porphyrin and phthalocyanine monolayers on the surface of Bi2Te3 thin films, robust interfaces are formed that preserve undoped topological surface states as well as the pristine magnetic moment of the divalent Co ions. The selected ligands allow us to tune the interfacial hybridization within this weak interaction regime. These results, which are in stark contrast with the observed suppression of the surface state at the first quintuple layer of Bi2Se3 induced by the interaction with Co phthalocyanines, demonstrate the capability of planar metal–organic molecules to span interactions from the strong to the weak limit., This research was funded by the CERCA Program/Generalitat de Catalunya and supported by the Spanish Ministry of Economy and Competitiveness, MINECO (under Contract Nos. MAT2016-78293-C6-2-R, MAT2016-75952-R, and RTI2018-095622-B-I00 and Severo Ochoa No. SEV-2017-0706), the Secretariat for Universities and Research, Knowledge Department of the Generalitat de Catalunya 2017 SGR 827, the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (Contract No. EFA 194/16 TNSI), the European Commission under the H2020 FET Grant Agreements Mechanics with Molecules (MEMO) (Grant No. 766864), TOCHA (Grant No. 824140), and the European Research Council (Grant No. 306652 SPINBOUND)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Probing the magnetism of topological end states in 5-armchair graphene nanoribbons

  • Lawrence, James
  • Brandimarte, Pedro
  • Berdonces-Layunta, Alejandro
  • Mohammed, Mohammed S. G.
  • Grewal, Abhishek
  • Leon, Christopher C.
  • Sánchez-Portal, Daniel
  • Oteyza, Dimas G. de
We extensively characterize the electronic structure of ultranarrow graphene nanoribbons (GNRs) with armchair edges and zigzag termini that have five carbon atoms across their width (5-AGNRs), as synthesized on Au(111). Scanning tunneling spectroscopy measurements on the ribbons, recorded on both the metallic substrate and a decoupling NaCl layer, show well-defined dispersive bands and in-gap states. In combination with theoretical calculations, we show how these in-gap states are topological in nature and localized at the zigzag termini of the nanoribbons. In addition to rationalizing the driving force behind the topological class selection of 5-AGNRs, we also uncover the length-dependent behavior of these end states which transition from singly occupied spin-split states to a closed-shell form as the ribbons become shorter. Finally, we demonstrate the magnetic character of the end states via transport experiments in a model two-terminal device structure in which the ribbons are suspended between the scanning probe and the substrate that both act as leads., We acknowledge funding from the European Union’s Horizon 2020 programme (Grant Agreement Nos. 635919 and 863098 from ERC and FET Open projects, respectively), from the Spanish MINECO (Grant Nos. FIS2017-83780-P and MAT2016-78293-C6), and from the University of the Basque Country (Grant IT1246-19). D.G.O. thanks the Alexander von Humboldt Foundation for supporting his research stay at the MPI, and Klaus Kern for hosting him., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

SIESTA: Recent developments and applications

  • García Arribas, Alberto
  • Papior, Nick
  • Akhtar, Arsalan
  • Artacho, Emilio
  • Blum, Volker
  • Bosoni, Emanuele
  • Brandimarte, Pedro
  • Brandbyge, Mads
  • Cerdá, Jorge I.
  • Corsetti, Fabiano
  • Cuadrado, Ramón
  • Dikan, Vladimir
  • Ferrer, Jaime
  • Gale, Julian D.
  • García-Fernández, Pablo
  • García-Suárez, Víctor M.
  • García, Sandra
  • Huhs, Georg
  • Illera, Sergio
  • Korytár, Richard
  • Koval, Peter
  • Lebedeva, Irina
  • Lin, Lin
  • López-Tarifa, Pablo
  • Mayo, Sara G.
  • Mohr, Stephan
  • Ordejón, Pablo
  • Postnikov, Andrei
  • Pouillon, Yann
  • Pruneda, Miguel
  • Robles, Roberto
  • Sánchez-Portal, Daniel
  • Soler, Josep M.
  • Ullah, Rafi
  • Wen-zhe Yu, Victor
  • Junquera, Javier
This article is part of the JCP Special Topic on Electronic Structure Software., A review of the present status, recent enhancements, and applicability of the SIESTA program is presented. Since its debut in the mid-1990s, SIESTA’s flexibility, efficiency, and free distribution have given advanced materials simulation capabilities to many groups worldwide. The core methodological scheme of SIESTA combines finite-support pseudo-atomic orbitals as basis sets, norm-conserving pseudopotentials, and a realspace grid for the representation of charge density and potentials and the computation of their associated matrix elements. Here, we describe the more recent implementations on top of that core scheme, which include full spin–orbit interaction, non-repeated and multiple-contact ballistic electron transport, density functional theory (DFT)+U and hybrid functionals, time-dependent DFT, novel reduced-scaling solvers, density-functional perturbation theory, efficient van der Waals non-local density functionals, and enhanced molecular-dynamics options. In addition, a substantial effort has been made in enhancing interoperability and interfacing with other codes and utilities, such as WANNIER90 and the second-principles modeling it can be used for, an AiiDA plugin for workflow automatization, interface to Lua for steering SIESTA runs, and various post-processing utilities. SIESTA has also been engaged in the Electronic Structure Library effort from its inception, which has allowed the sharing of various low-level libraries, as well as data standards and support for them, particularly the PSeudopotential Markup Language definition and library for transferable pseudopotentials, and the interface to the ELectronic Structure Infrastructure library of solvers. Code sharing is made easier by the new open-source licensing model of the program. This review also presents examples of application of the capabilities of the code, as well as a view of on-going and future developments., Siesta development was historically supported by different Spanish National Plan projects (Project Nos. MEC-DGES-PB95-0202, MCyT-BFM2000-1312, MEC-BFM2003-03372, FIS2006-12117, FIS2009-12721, FIS2012-37549, FIS2015-64886-P, and RTC-2016-5681-7), the latter one together with Simune Atomistics Ltd. We are thankful for financial support from the Spanish Ministry of Science, Innovation and Universities through Grant No. PGC2018-096955-B. We acknowledge the Severo Ochoa Center of Excellence Program [Grant Nos. SEV-2015-0496 (ICMAB) and SEV-2017-0706 (ICN2)], the GenCat (Grant No. 2017SGR1506), and the European Union MaX Center of Excellence (EU-H2020 Grant No. 824143). P.G.-F. acknowledges support from Ramón y Cajal (Grant No. RyC-2013-12515). J.I.C. acknowledges Grant No. RTI2018-097895-B-C41. R.C. acknowledges the European Union’s Horizon 2020 Research and Innovation Program under Marie Skłodoswka-Curie Grant Agreement No. 665919. D.S.P, P.K., and P.B. acknowledge Grant No. MAT2016-78293-C6, FET-Open No. 863098, and UPV-EHU Grant No. IT1246-19. V. W. Yu was supported by a MolSSI Fellowship (U.S. NSF Award No. 1547580), and V.B. and V.W.Y. were supported by the ELSI Development by the NSF (Award No. 1450280)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Single photon emission from a plasmonic light source driven by a local field-induced Coulomb blockade

  • Leon, Christopher C.
  • Gunnarsson, O.
  • Oteyza, Dimas G. de
  • Rosławska, Anna
  • Merino, Pablo
  • Grewal, Abhishek
  • Kuhnke, Klaus
  • Kern, Klaus
A hallmark of quantum control is the ability to manipulate quantum emission at the nanoscale. Through scanning tunneling microscopy-induced luminescence (STML), we are able to generate plasmonic light originating from inelastic tunneling processes that occur in the vacuum between a tip and a few-nanometer-thick molecular film of C60 deposited on Ag(111). Single photon emission, not of molecular excitonic origin, occurs with a 1/e recovery time of a tenth of a nanosecond or less, as shown through Hanbury Brown and Twiss photon intensity interferometry. Tight-binding calculations of the electronic structure for the combined tip and Ag–C60 system results in good agreement with experiment. The tunneling happens through electric-field-induced split-off states below the C60 LUMO band, which leads to a Coulomb blockade effect and single photon emission. The use of split-off states is shown to be a general technique that has special relevance for narrowband materials with a large bandgap., D. G. de Oteyza acknowledges support from the Alexander von Humboldt Foundation for his research stay at the MPI, hosted by K. Kern, as well as from the European Research Council under the European Union’s Horizon 2020 research and innovation programme (grant agreement no. 635919) and from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. MAT2016-78293-C6-1-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Transferring axial molecular chirality through a sequence of on-surface reactions

  • Merino-Díez, Nestor
  • Mohammed, Mohammed S. G.
  • Castro-Esteban, Jesús
  • Colazzo, Luciano
  • Berdonces-Layunta, Alejandro
  • Lawrence, James
  • Pascual, José I.
  • Oteyza, Dimas G. de
  • Peña, Diego
This article is part of the themed collection: 2020 Chemical Science HOT Article Collection., Fine management of chiral processes on solid surfaces has progressed over the years, yet still faces the need for the controlled and selective production of advanced chiral materials. Here, we report on the use of enantiomerically enriched molecular building blocks to demonstrate the transmission of their intrinsic chirality along a sequence of on-surface reactions. Triggered by thermal annealing, the on-surface reactions induced in this experiment involve firstly the coupling of the chiral reactants into chiral polymers and subsequently their transformation into planar prochiral graphene nanoribbons. Our study reveals that the axial chirality of the reactant is not only transferred to the polymers, but also to the planar chirality of the graphene nanoribbon end products. Such chirality transfer consequently allows, starting from adequate enantioenriched reactants, for the controlled production of chiral and prochiral organic nanoarchitectures with pre-defined handedness., We acknowledge funding from the European Union's Horizon 2020 Programme (Grant Agreement No. 635919 (“SURFINK”) and 863098 (“SPRING”)), from the Spanish MINECO (Grant No. MAT2016-78293-C6), Xunta de Galicia (Centro singular de investigación de Galicia, accreditation 2016–2019, ED431G/09), and the Fondo Europeo de Desarrollo Regional (FEDER)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning Paramagnetic effect of Co-Doped CdS diluted magnetic semiconductor quantum dots

  • Ibraheem, Fatma
  • Mahdy, Manal A.
  • Mahmoud, Esmat A.
  • Ortega, J. Enrique
  • Rogero, Celia
  • Mahdy, Iman A.
  • El-Sayed, Afaf
Diluted magnetic semiconductor quantum dots (DMS-QDs) are known for their outstanding optical and magnetic properties. II–VI DMS-QDs, in particular, are interesting for spintronics, nonvolatile memory, and magneto-optical devices. Therefore, studying the optical and magnetic properties of different II-VI semiconductors doped with transition metal atoms is of great importance. Tuning II-VI QDs optical properties can be mastered by changing the QDs particle size and/or structure. However tuning the magnetic properties of DMS-QDs is still within trial and error verification, although it is crucial in targeting different applications in spintronics. We hereby demonstrate, the ability to tune the paramagnetic effect of homogeneous Co-doped CdS QDs following a co-precipitation synthesis route with different Co2+ concentrations. The structural, optical and magnetic properties have been comprehensively studied. The dopant cobalt atoms concentration and chemical-configuration were precisely tracked by x-ray photoemission spectroscopy. Excitingly, the different Co-concentrations of 2, 5 and 10% significantly improve the magnetic properties of the CdS QDs, which exhibit a paramagnetic concentration-dependent effect. With 10% of Co atoms, we were able to achieve ~ 200 x 10(-6) molar susceptibility, that is, the same value to that of pure CoS. Thus we could obtain the highest possible paramagnetic effect in the CdS semiconducting matrix exhibiting 2.76 eV band gap, i.e. in the visible range. This efficacious result encourages the use of the present method in preparing DMS-QDs materials targeting various spintronics applications., AE and IM are acknowledging the funding provided by the joint Russian Egyptian STDF project no. 13756. AE is also grateful also for the general administration of Missions at the Ministry of High Education in Egypt for funding the mission trip to Centro de Fisica de Materiales on 2016. CR and EO are grateful for funding from the Spanish Ministry of Economy and Competitiveness (grant MAT2016-78293-C6-5-R, including FEDER funds), the Basque Government (grant IT-1255-19) and the Interreg POCTEFA V-A Spain–France–Andorra Program (EFA 194/16/TNSI) partly financed by ERDF funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Vibron-assisted spin excitation in a magnetically anisotropic molecule

  • Bachellier, Nicolas
  • Verlhac, Benjamin
  • Garnier, L.
  • Zaldívar, Javier
  • Rubio-Verdú, Carmen
  • Abufager, Paula
  • Ormaza, Maider
  • Choi, Deung-Jang
  • Bocquet, Marie-Laure
  • Pascual, José I.
  • Lorente, Nicolás
  • Limot, Laurent
The electrical control and readout of molecular spin states are key for high-density storage. Expectations are that electrically-driven spin and vibrational excitations in a molecule should give rise to new conductance features in the presence of magnetic anisotropy, offering alternative routes to study and, ultimately, manipulate molecular magnetism. Here, we use inelastic electron tunneling spectroscopy to promote and detect the excited spin states of a prototypical molecule with magnetic anisotropy. We demonstrate the existence of a vibron-assisted spin excitation that can exceed in energy and in amplitude a simple excitation among spin states. This excitation, which can be quenched by structural changes in the magnetic molecule, is explained using first-principles calculations that include dynamical electronic correlations., This work was supported by the Agence Nationale de la Recherche (grants No. ANR-13-BS10-0016, ANR-11-LABX-0058 NIE and ANR-10-LABX-0026 CSC) and by the Agencia Española de Investigación (grants Nos. MAT2016-78293-C6-1-R and MDM-2016-0618). D.-J.C. and N.L. thank the MICINN (project RTI2018-097895-B-C44). M.-L.B. thanks the national computational center CINES and TGCC (GENCI project: A0030807364)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Anisotropic electron conductance driven by reaction byproducts on a porous network of dibromobenzothiadiazole on Cu(110)

  • Barragán, Ana
  • Sarasola, Ane
  • Vitali, Lucia
Efficiency in charge-transport is a fundamental but demanding prerequisite to allow better exploitation of molecular functionalities in organic electronics and energy-conversion systems. Here, we report on a mechanism that enables a one-dimensional conductance structure by connecting discrete molecular states at 2.1 eV through the pores of a metal–organic network on Cu(110). Two adjacent, periodic and isoenergetic contributions, namely a molecular resonance and the confined surface-state, add-up leading to anisotropic structures, as channels, observable in real-space conductance images. The adsorption configurations of Br atoms, inorganic byproduct of the redox-reacted 4,7-dibromobenzo[c]-1,2,5-thiadiazole (2Br-BTD) molecules on the copper surface, drive the confinement of the Cu surface state within the pores and critically control the channel continuity. Small displacements of the Br atoms change the local surface potential misaligning the energy levels. This work visualizes the effect of order-disorder transitions caused by the movement of single atoms in the electronic properties of two-dimensional organic networks., A.B. and L.V. acknowledge the economic support of theSpanish Ministry of Economy, Industry and Competitiveness(MINECO Grant number MAT2016-78293-C6-5-R). A.S.acknowledges the financial support by the Gobierno Vasco-UPV/EHU project IT1246-19. A.B. acknowledges Vicerrectorado de Investigación of the University of the Basque Country (UPV/EHU) for the PhD fellowship (2016)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

CO Chemisorption on Vicinal Rh(111) Surfaces Studied with a Curved Crystal

  • Garcia-Martinez, Fernando
  • Schiller, Frederik
  • Blomberg, Sara
  • Shipilin, Mikhail
  • Merte, Lindsay R.
  • Gustafson, Johan
  • Lundgren, Edvin
  • Ortega, J. Enrique
Curved crystal surfaces enable the systematic and accurate comparison of physical and chemical processes for a full set of vicinal crystal planes, which are probed in the very same environment. Here, we examine the early stages of the CO chemisorption on vicinal Rh(111) surfaces using a curved Rh crystal that exposes a smoothly variable density of {100} (A-type) and {111} (B-type) steps. We readily identify and quantify step and terrace species by resolving their respective core-level lines using X-ray photoelectron spectroscopy at different locations on the curved surface. Uptake experiments show similar sticking probabilities at all surface planes, subtle asymmetries between A- and B-type steps, and significantly lower saturation coverage at densely stepped surfaces as compared to the (111) plane. The analysis of the C 1s intensity variation across the curved sample allows us to discuss the adsorption geometry around the step edge., We acknowledge financial support from the Spanish Ministry of Economy (Grants MAT-2016-78293-C6, MAT-2017- 88374-P), Basque Government (Grant IT-1255-19), the VR funded Röntgen−Angström collaboration “Catalysis on the atomic scale” project number 349-2011-6491, and the Knut and Alice Wallenberg (KAW) funded project “Atomistic design of new catalysts” project number KAW 2015.0058.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fluorescent bicolour sensor for low-background neutrinoless double β decay experiments

  • Rivilla, Iván
  • Aparicio, Borja
  • Bueno, J. M.
  • Casanova, David
  • Tonnelé, Claire
  • Freixa, Zoraida
  • Herrero-Gómez, P.
  • Rogero, Celia
  • Miranda, José Ignacio
  • Martínez-Ojeda, Rosa M.
  • Monrabal, Francesc
  • Olave, Beñat
  • Schäfer, Thomas
  • Artal, Pablo
  • Nygren, David
  • Cossío, Fernando P.
  • Gómez Cadenas, Juan José
Observation of the neutrinoless double β decay is the only practical way to establish that neutrinos are their own antiparticles. Because of the small masses of neutrinos, the lifetime of neutrinoless double β decay is expected to be at least ten orders of magnitude greater than the typical lifetimes of natural radioactive chains, which can mimic the experimental signature of neutrinoless double β decay. The most robust identification of neutrinoless double β decay requires the definition of a signature signal—such as the observation of the daughter atom in the decay—that cannot be generated by radioactive backgrounds, as well as excellent energy resolution. In particular, the neutrinoless double β decay of Xe could be established by detecting the daughter atom, Ba, in its doubly ionized state. Here we demonstrate an important step towards a ‘barium-tagging’ experiment, which identifies double β decay through the detection of a single Ba ion. We propose a fluorescent bicolour indicator as the core of a sensor that can detect single Ba ions in a high-pressure xenon gas detector. In a sensor made of a monolayer of such indicators, the Ba dication would be captured by one of the molecules and generate a Ba-coordinated species with distinct photophysical properties. The presence of such a single Ba-coordinated indicator would be revealed by its response to repeated interrogation with a laser system, enabling the development of a sensor able to detect single Ba ions in high-pressure xenon gas detectors for barium-tagging experiments., We also acknowledge support from the following agencies and institutions: the European Research Council (ERC) under Advanced Grant 339787-NEXT; the Ministry of Science and Innovation of Spain and FEDER under grants FIS2014-53371-C04, FIS2016-76163-R, MAT2016-78293-C6-5-R, MINECO/FEDER CT2016-80955-P, CTQ2016-80375-P and CTQ2014-51912-REDC; Interred PCTEFA V-A Spain/France/Andorra Program (EFA 194/16/TNSI); the Basque Government (GV/EJ) under grants IT-1346-19 and IT-1180-19; andAgencia de Ciencia y Tecnología de la Región de Murcia (19897/GERM/15). The authors also thank the SGI/IZO-SGIker UPV/EHU, Fundación Séneca and DIPC for computational and analytical resources.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Harvesting multiple optical energies using ZnPc/CdS-QDs hybrid organic/inorganic semiconductors

  • El-Sayed, Afaf
  • Mahdy, Iman A.
  • Ibraheem, Fatma
  • Mahmoud, Esmat A.
  • Ortega, J. Enrique
  • Rogero, Celia
The substitution of inorganic-based electronics by organic semiconducting materials is a current trend in science and technology for its economic and environmental benefits, but it is hardly progressing. The reason thereof is the lack of improved efficiency, which affects the organic semiconductors performance in many devices when compared with their inorganic-based counterparts. A recent peculiar idea of using heterostructures consisting of both organic and inorganic materials has become an auspicious solution. To this end, the ability to synthesize hybrid organic/inorganic semiconductors targeting different applications is of utmost importance. We hereby present a successful simple route to synthesize a stable homogenous hybrid organic/inorganic system consisting of zinc phthalocyanine (ZnPc) oligomers as the organic base, and Cadmium sulfide quantum dots (CdS QDs) as the inorganic part. The structural and optical characterizations of the prepared samples demonstrate new optical absorption transitions for the hybrids in the red region belonging to the ZnPc molecules, besides the original blue band absorption of the CdS QDs. This is combined with a reduced radiative emission of the whole system. Thus, the hybrid materials are capable of harvesting multiple frequencies within the visible spectra more efficiently than pure QDs, while relaxing non-radiatively rather than by emitting electrons or heat. These qualities favor the use of these hybrids as solar cell or thermal-power active materials., AE and IM are acknowledging the funding provided by the joint Russian Egyptian STDF Project No. 13756. AE is also grateful for the general administration of Missions at the Ministry of High Education in Egypt for funding the mission trip to Centro de Fisica de Materiales on 2016. CR and EO are grateful for funding from the Spanish Ministry of Economy and Competitiveness (Grant MAT2016-78293-C6-5-R, including FEDER funds) and the Interreg POCTEFA V-A Spain–France–Andorra Program (EFA 194/16/TNSI) partly fnanced by ERDF funds.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Key role of the surface band structure in spin-dependent interfacial electron transfer: Ar/Fe(110) and Ar/Co(0001)

  • Müller, Moritz
  • Echenique, Pedro M.
  • Sánchez-Portal, Daniel
The injection of spin-polarized electrons across interfaces is central to many technologies, and hence, it is important to understand the main ingredients controlling it. Here, we demonstrate that the spin dependence of ultrafast electron transfer at Ar/Co(0001) and Ar/Fe(110) interfaces is rooted in the details of the spin-split surface band structures. The injection dynamics are particularly sensitive to the sizes (in reciprocal space) of projected electronic band gaps around Γ̅. Our ab initio calculations back that minority electrons are injected significantly faster than majority electrons in line with recently reported experimental injection times. A simple tunnelling model incorporating the spin-dependent gap sizes confirms that this ingredient is crucial to rationalize the experimental results., We acknowledge illuminating discussions with Prof. U. Heinzmann and Prof. P. Feulner, as well as financial support from the EU FP7 programme under Grant Agreement No. 607232 (THINFACE), the Spanish Ministerio de Ciencia, Innovacion y Universidades (Grant. No. MAT2016-78293-C6-4-R and Grant No. PID2019-107338RB-C66) and the Basque Dep. de Educacion and the UPV/EHU (Grant No. IT1246-19).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On-surface synthesis of a five-membered carbon ring from a terminal alkynyl bromide: A [4 + 1] annulation

  • Wang, Tao
  • Pan, Yu
  • Zhang, Wenzhao
  • Lawrence, James
  • Mohammed, Mohammed S. G.
  • Huang, Jianmin
  • Feng, Ling
  • Berdonces-Layunta, Alejandro
  • Han, Dong
  • Xu, Qian
  • Wu, Xiaojun
  • Tait, Steven L.
  • Oteyza, Dimas G. de
  • Zhu, Junfa
We report an on-surface synthesis of five-membered carbon ring via a [4 + 1] annulation reaction, starting from a simple terminal alkynyl bromide, 4-(bromoethynyl)biphenyl, on Ag(110). The combination of scanning tunneling microscopy (STM), synchrotron radiation photoemission spectroscopy (SRPES), and density functional theory (DFT) calculations unravel the reaction pathway and mechanism. Three basic reaction steps are involved, successively including the formation of alkynyl-Ag-alkynyl bridged organometallic dimer, the generation of alkylidene carbene intermediate, and the final [4 + 1] annulation involving a hydrogen transfer step., This work was financially supported by the National Natural Science Foundation of China (21773222, 21573204 21890751), the National Key R&D Program of China (2017YFA0403402, 2016YFA0200602, 2018YFA0208603), the DNL Cooperation Fund, CAS (DNL180201), the Anhui Initiative in Quantum Information Technologies, the Fundamental Research Funds for the Central University, and the Supercomputer Center of USTCSCC and SCCAS. S.L.T. was supported by the CAS President’s International Fellowship Initiative. This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Grant agreement No. 635919), and from the Spanish MINECO (Grant No. MAT2016-78293-C6).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Strong interfacial exchange field in a heavy metal/ferromagnetic insulator system determined by spin hall magnetoresistance

  • Gomez-Perez, Juan M.
  • Zhang, Xian-Peng
  • Calavalle, Francesco
  • Ilyn, Max
  • González-Orellana, Carmen
  • Gobbi, Marco
  • Rogero, Celia
  • Chuvilin, Andrey
  • Golovach, Vitaly N.
  • Hueso, Luis E.
  • Bergeret, F. Sebastian
  • Casanova, Félix
Spin-dependent transport at heavy metal/magnetic insulator interfaces is at the origin of many phenomena at the forefront of spintronics research. A proper quantification of the different interfacial spin conductances is crucial for many applications. Here, we report the first measurement of the spin Hall magnetoresistance (SMR) of Pt on a purely ferromagnetic insulator (EuS). We perform SMR measurements in a wide range of temperatures and fit the results by using a microscopic model. From this fitting procedure, we obtain the temperature dependence of the spin conductances (Gs, Gr, and Gi), disentangling the contribution of field-like torque (Gi), damping-like torque (Gr), and spin-flip scattering (Gs). An interfacial exchange field of the order of 1 meV acting upon the conduction electrons of Pt can be estimated from Gi, which is at least three times larger than Gr below the Curie temperature. Our work provides an easy method to quantify this interfacial spin-splitting field, which plays a key role in emerging fields such as superconducting spintronics and caloritronics as well as topological quantum computation., The authors thank the technical support provided by SGIker Medidas Magneticas Gipuzkoa (UPV/EHU/ERDF, EU). The work was supported by the Spanish MICINN under the Maria de Maeztu Units of Excellence Programme (MDM-2016-0618), and Project Nos. MAT2015-65159-R, MAT2016-78293-C6-5-R, FIS2017-82804-P, and RTI2018-094861-B100 by the Regional Council of Gipuzkoa (Project Nos. 100/16 and IT-1255-19), by the EU’s Horizon 2020 research and innovation program under Grant Agreement Nos. 800923-SUPERTED and 766025-QuESTech. J.M.G.-P. thanks the Spanish MICINN for a Ph.D. fellowship (Grant No. BES2016-077301). M.G. acknowledges support from the European Commission for a Marie Sklodowska-Curie IEF (Grant No. 748971-SUPER2D) and from la Caixa Foundation for a Junior Leader fellowship (Grant No. LCF/BQ/PI19/11690017).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synthesis of graphene nanoribbons on a kinked au surface: Revealing the frontier valence band at the brillouin zone center

  • El-Sayed, Afaf
  • Piquero-Zulaica, Ignacio
  • Abd El-Fattah, Zakaria M.
  • Kormoš, L.
  • Ali, Khadiza
  • Weber, Andrew P.
  • Brede, Jens
  • Oteyza, Dimas G. de
  • Lobo-Checa, Jorge
  • Ortega, J. Enrique
  • Corso, Martina
Graphene nanoribbons (GNRs) can be synthesized with atomic precision through on-surface chemistry of self-assembled organic precursors on metal surfaces. Here, we examine the growth of seven-armchair GNRs (7-AGNRs) on the Au(16 14 15) vicinal surface, namely, a surface vicinal to Au(111) that features kinked steps. During the thermal activation of the polymerization and cyclodehydrogenation processes that produce the GNRs, the kinked substrate undergoes a strong step-edge reshaping, accompanied by a massive missing-row reconstruction within (111) terraces that aligns GNRs preferentially along two equivalent [11¯ 0] directions. Using angle-resolved photoemission, we are able to detect the occupied frontier band of the 7-AGNR at the center of the first Brillouin zone, as predicted by theoretical calculations. This allows to unambiguously determine the relevant 7-AGNR band properties, namely, energy and effective mass., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation (MAT2016-78293-C6), from the Basque Government (IT-1255-19), from the Spanish National Research Council (CSIC, 2019AEP062), from the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (contract no. EFA 194/16 TNSI) and from the European Research Council (grant agreement no. 635919).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Crossed graphene nanoribbons as beam splitters and mirrors for electron quantum optics

  • Sanz, Sofía
  • Brandimarte, Pedro
  • Giedke, Géza
  • Sánchez-Portal, Daniel
  • Frederiksen, Thomas
We analyze theoretically four-terminal electronic devices composed of two crossed graphene nanoribbons (GNRs) and show that they can function as beam splitters or mirrors. These features are identified for electrons in the low-energy region where a single valence or conduction band is present. Our modeling is based on p z orbital tight binding with Slater-Koster-type matrix elements fitted to accurately reproduce the low-energy bands from density functional theory calculations. We analyze systematically all devices that can be constructed with either zigzag or armchair GNRs in AA and AB stackings. From Green's function theory the elastic electron transport properties are quantified as a function of the ribbon width. We find that devices composed of relatively narrow zigzag GNRs and AA-stacked armchair GNRs are the most interesting candidates to realize electron beam splitters with a close to 50:50 ratio in the two outgoing terminals. Structures with wider ribbons instead provide electron mirrors, where the electron wave is mostly transferred into the outgoing terminal of the other ribbon, or electron filters where the scattering depends sensitively on the wavelength of the propagating electron. We also test the robustness of these transport properties against variations in the intersection angle, stacking pattern, lattice deformation (uniaxial strain), inter-GNR separation, and electrostatic potential differences between the layers. These generic features show that GNRs are interesting basic components to construct electronic quantum optical setups., This work was supported by the project Spanish Ministerio de Economía y Competitividad (MINECO) through the Grants no. FIS2017-83780-P (Graphene Nanostructures “GRANAS”) and no.MAT2016-78293-C6-4R, the Basque Departamento de Educación through the PhD fellowship no. PRE_2019_2_0218 (S.S.), the University of the Basque Country through the Grant no. IT1246-19, and the European Union (EU) through Horizon 2020 (FET-Open project SPRING Grant no. 863098)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electronic decoupling of polyacenes from the underlying metal substrate by sp3 carbon atoms

  • Mohammed, Mohammed S. G.
  • Colazzo, Luciano
  • Robles, Roberto
  • Dorel, Ruth
  • Echavarren, Antonio M.
  • Lorente, Nicolás
  • Oteyza, Dimas G. de
On-surface synthesis is becoming an increasingly popular approach to obtain new organic materials. In this context, metallic surfaces are the most commonly used substrates. However, their hybridization with the adsorbates often hinder a proper characterization of the molecule’s intrinsic electronic and magnetic properties. Here we report a route to electronically decouple molecules from their supporting substrates. In particular, we have used a Ag(001) substrate and hydrogenated heptacene molecules, in which the longest conjugated segment determining its frontier molecular orbitals amounts to five consecutive rings. The non-planarity that sp3 atoms impose on the carbon backbone results in electronically decoupled molecules, as demonstrated by scanning tunneling spectroscopy measurements. The charging resonances of the latter imply the presence of double tunneling barriers. We further explain the existing relation between the charging resonance energy and their contrast, as well as with the presence or absence of additional Kondo resonances., This project has received funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement Nos. 635919 (ERC-StG), 837225 (ERC-PoC), and 766864 (FET-Open), from the Spanish Agencia Estatal de Investigación (Grant Nos. MAT2016-78293-C6, PID2019-104815GB-I00 and PID2019-107338RB-C63), from AGAUR (2017 SGR 1257), and from the CERCA,Program/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Increase of polymerization yield on titania by surface reduction

  • Abadia, Mikel
  • Vasseur, Guillaume
  • Kolmer, Marek
  • Zajac, Lukasz
  • Verdini, Alberto
  • Ortega, J. Enrique
  • Floreano, Luca
  • Rogero, Celia
  • Brede, Jens
The surface-assisted Ullmann reaction, widely employed in the synthesis of covalent organic networks, molecular spin chains, and graphene nanoribbons, has been extensively studied on noble metal surfaces, being widely accepted that the metal surface acts as a catalyst during the reaction. However, the development of routes to obtain covalent molecular systems on nonmetallic substrates represents a key technological advancement. Recent experiments demonstrate molecular coupling reactions on transition metal oxide surfaces, suggesting alternative reaction mechanisms, because the high oxidization state of metal atoms forming the substrate impairs the catalytic activity. Here, we use synchrotron-based photoelectron spectroscopy to follow the temperature dependence of the polymerization of a reference precursor (4,4-dibromo-p-terphenyl precursor) on reduced and nearly stoichiometric rutile TiO2(110) surfaces. Throughout the reaction, we carefully monitor the concentration of precursor molecules, polymers, and surface defects. We find that while some polymerization takes place regardless of the amount of surface reduction, the reaction yield increases on highly reduced TiO2(110) substrates. The spectroscopic lines of evidence concurrently indicate that the polymerization is driven by the surface segregation of interstitial Ti atoms, whose diffusion is favored in reduced crystals., The authors thank the Spanish Ministry of Economy and Competitiveness for funding, grant MAT2016-78293-C6-5-R (AEI/ERDF, EU), Interreg POCTEFA V-A Spain–France-Andorra Program (EFA 194/16/TNSI) partly financed by ERDF funds, and Basque Government (grant IT-1255-19). M.K. and L.Z. thank the Polish Ministry of Science and Higher Education, contract no. 0341/IP3/2016/74., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetism of topological boundary states induced by boron substitution in graphene nanoribbons

  • Friedrich, Niklas
  • Brandimarte, Pedro
  • Li, Jingcheng
  • Saito, Shohei
  • Yamaguchi, Shigehiro
  • Pozo, Iago
  • Peña, Diego
  • Frederiksen, Thomas
  • Garcia-Lekue, Aran
  • Sánchez-Portal, Daniel
  • Pascual, José I.
Graphene nanoribbons (GNRs), low-dimensional platforms for carbon-based electronics, show the promising perspective to also incorporate spin polarization in their conjugated electron system. However, magnetism in GNRs is generally associated with localized states around zigzag edges, difficult to fabricate and with high reactivity. Here we demonstrate that magnetism can also be induced away from physical GNR zigzag edges through atomically precise engineering topological defects in its interior. A pair of substitutional boron atoms inserted in the carbon backbone breaks the conjugation of their topological bands and builds two spin-polarized boundary states around them. The spin state was detected in electrical transport measurements through boron-substituted GNRs suspended between the tip and the sample of a scanning tunneling microscope. First-principle simulations find that boron pairs induce a spin 1, which is modified by tuning the spacing between pairs. Our results demonstrate a route to embed spin chains in GNRs, turning them into basic elements of spintronic devices., We gratefully acknowledge financial support from Spanish Agencia Estatal de Investigación (AEI) (MAT2016-78293, PID2019-107338RB, FIS2017-83780-P, and the Maria de Maeztu Units of Excellence Programme MDM-2016-0618), from the European Union (EU) through Horizon 2020 (FET-Open project SPRING Grant. No. 863098), the Basque Departamento de Educación through the PhD fellowship No. PRE_2019_2_0218 (S.S.), the Xunta de Galicia (Centro de Investigación de Galicia accreditation 2019–2022, ED431G 2019/03), the University of the Basque Country (Grant IT1246-19), and the European Regional Development Fund (ERDF). I. P. also thanks Xunta de Galicia and European Union (European Social Fund, ESF) for the award of a predoctoral fellowship-, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Stabilizing edge fluorination in graphene nanoribbons

  • Panighel, Mirko
  • Quiroga, Sabela
  • Brandimarte, Pedro
  • Moreno, César
  • Garcia-Lekue, Aran
  • Vilas-Varela, Manuel
  • Rey, Dulce
  • Sauthier, Guillaume
  • Ceballos, Gustavo
  • Peña, Diego
  • Mugarza, Aitor
The on-surface synthesis of edge-functionalized graphene nanoribbons (GNRs) is challenged by the stability of the functional groups throughout the thermal reaction steps of the synthetic pathway. Edge fluorination is a particularly critical case in which the interaction with the catalytic substrate and intermediate products can induce the complete cleavage of the otherwise strong C–F bonds before the formation of the GNR. Here, we demonstrate how a rational design of the precursor can stabilize the functional group, enabling the synthesis of edge-fluorinated GNRs. The survival of the functionalization is demonstrated by tracking the structural and chemical transformations occurring at each reaction step with complementary X-ray photoelectron spectroscopy and scanning tunneling microscopy measurements. In contrast to previous attempts, we find that the C–F bond survives the cyclodehydrogenation of the intermediate polymers, leaving a thermal window where GNRs withhold more than 80% of the fluorine atoms. We attribute this enhanced stability of the C–F bond to the particular structure of our precursor, which prevents the cleavage of the C–F bond by avoiding interaction with the residual hydrogen originated in the cyclodehydrogenation. This structural protection of the linking bond could be implemented in the synthesis of other sp2-functionalized GNRs., C.M. was supported by the Agency for Management of University and Research grants (AGAUR) of the Catalan government through the FP7 framework program of the European Commission under Marie Curie COFUND action 600385 funded by the CERCA Program/Generalitat de Catalunya. We acknowledge support from the Spanish Ministry of Economy and Competitiveness, MINECO (under Contracts Nos. MAT2016-78293-C6 and FIS2017-83780-P and SEV-2017-0706), the Spanish Research Agency (AEI /10.13039/501100011033, under Contracts Nos. PID2019-107338RB, PCI2019-111890-2), the European Regional Development Fund (ERDF), the Interreg V-A España-Francia-Andorra program (Contract No. EFA 194/16 TNSI), the EU project SPRING (863098), the Xunta de Galicia (Centro singular de investigación de Galicia accreditation 2019-2022, ED431G 2019/03)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chemically synthesized chevron-like graphene nanoribbons for electrochemical sensors development: determination of epinephrine

  • Sainz, Raquel
  • Pozo, María del
  • Vilas-Varela, Manuel
  • Castro-Esteban, Jesús
  • Pérez Corral, María
  • Vázquez, L.
  • Blanco, Elias
  • Peña, Diego
  • Martín-Gago, José A.
  • Ellis, Gary James
  • Petit-Domínguez, M. Dolores
  • Quintana, Carmen
  • Casero, Elena
We employ chevron-like graphene nanoribbons (GNRs) synthesized by a solution-based chemical route to develop a novel electrochemical sensor for determination of the neurotransmitter epinephrine (EPI). The sensor surface, a glassy carbon electrode modified with GNRs, is characterized by atomic force microscopy, scanning electron microscopy and Raman spectroscopy, which show that the electrode surface modification comprises of bi-dimensional multilayer-stacked GNRs that retain their molecular structure. The charge transfer process occurring at the electrode interface is evaluated by electrochemical impedance spectroscopy. The sensor is applied to the determination of EPI, employing as an analytical signal the reduction peak corresponding to the epinephrinechrome–leucoepinephrinechrome transition (E = − 0.25 V) instead of the oxidation peak usually employed in the literature (E = + 0.6 V) in order to minimize interferences. The results obtained demonstrate that chevron-like nanoribbons synthesized by solution methods exhibit reliable electrocatalytic activity for EPI determination. Using differential pulse voltammetry, we obtain a linear concentration range from 6.4 × 10 to 1.0 × 10 M and a detection limit of 2.1 × 10 M. The applicability of the sensor was evaluated by determining EPI in pharmaceutical samples with satisfactory results., Te authors acknowledge fnancial support from the Spanish MICINN (MAT2017-85089-C2-1-R, MAT2017- 85089-C2-2-R), MINECO (MAT2016-78293-C6-3-R), the Comunidad Autónoma de Madrid (P2018/NMT-4349 TRANSNANOAVANSENS-CM, S2013/MIT-3029, PEJD-2017/IND4130), the Xunta de Galicia (Centro singular de investigación de Galicia, accreditation 2016–2019, ED431G/09) and Fondo Europeo de Desarrollo Regional (FEDER). We thank I. Ballesteros for the SEM measurements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Absence of magnetic proximity effect at the interface of Bi2Se3 and (Bi,Sb)2Te3 with EuS

  • Figueroa, Adriana I.
  • Bonell, Fréderic
  • Cuxart, M. G.
  • Valvidares, Manuel
  • Gargiani, Pierluigi
  • Laan, Gerrit van der
  • Mugarza, Aitor
  • Valenzuela, Sergio O.
We performed x-ray magnetic circular dichroism (XMCD) measurements on heterostructures comprising topological insulators (TIs) of the (Bi,Sb)2(Se,Te)3 family and the magnetic insulator EuS. XMCD measurements allow us to investigate element-selective magnetic proximity effects at the very TI/EuS interface. A systematic analysis reveals that there is neither significant induced magnetism within the TI nor an enhancement of the Eu magnetic moment at such interface. The induced magnetic moments in Bi, Sb, Te, and Se sites are lower than the estimated detection limit of the XMCD measurements of ∼10−3μB/at., This research was supported by the European Union’s Horizon 2020 FET-PROACTIVE project TOCHA under Grant Agreement 824140. The authors acknowledge funding by the European Research Council under Grant Agreement No. 306652 SPINBOUND, by the CERCA Programme/Generalitat de Catalunya 2017 SGR 827, by MINECO (under Contracts No. MAT2016-75952-R, No. MAT2016-78293-C6-2-R, No. PID2019-111773RBI00/AEI/10.13039/501100011033, No. PID2019- 107338RB-C65, and Severo Ochoa No. SEV-2017-0706) and the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (Contract No. EFA 194/16 TNSI). A. I. F. acknowledges funding from MINECO-Juan de la Cierva fellowship ref. IJCI-2015-25514 and from the European Union’s Horizon 2020 People Programme (Marie Skłodowska Curie Actions) H2020-MSCA-IF-2017 under REA Grant Agreement No. 796925. F. B. acknowledges funding from MINECO Ramón y Cajal Program under Contract No. RYC-2015-18523., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Atomically precise step grids for the engineering of helical states

  • Ortega, J. Enrique
  • Vasseur, Guillaume
  • Piquero-Zulaica, Ignacio
  • Schiller, Frederik
  • Raoult, Julien
  • Valbuena, Miguel A.
  • Schirone, S.
  • Matencio, Sonia
  • Mugarza, Aitor
  • Lobo-Checa, Jorge
Trabajo presentado al Symposium on Surface Science (3S), celebrado en St. Christoph am Arlberg (Austria) del 1 al 7 de marzo de 2020., Conventional spin-degenerated surface electrons have been effectively manipulated by using organic and inorganic self-assembled nano-arrays as resonators. Step superlattices naturally assembled in vicinal surfaces are a particularly interesting case since they represent simple one-dimensional (1D) models for fundamental studies, and can imprint strong anisotropies in surface electron transport in real devices. Here we present the first realization of periodic resonator arrays on the BiAg2 atom-thick surface alloy with unprecedented atomic precision, and demonstrate their potential ability for tuning helical Rashba states. We employ a Ag cylindrical crystal curved around the Ag(645) vicinal surface [c-Ag(645) sample] to be able of selecting local vicinal planes with kinked steps. After sublimation and post-annealing of a 0.3 ML Bi layer, we achieve a homogenous BiAg2 surface alloy, featuring sharp arrays of extraordinarily straight Bi-terminated, monoatomic steps, with variable (tunable) density across the curved surface. Scanning the ultraviolet light beam on such Bi/c-Ag(645) interface in angle-resolved photoemission (ARPES) experiments allowed us to observe the characteristic signatures of strong and coherent step-lattice scattering in the spin-textured bands of the BiAg2 alloy, that is, step-umklapps, and a large, step-density-dependent Rashba band shift. First-principle DFT calculations reveal a complex terrace/step spin/orbital composition, which in turn explains the large spectral broadening and strong photon-energy dependence observed in ARPES. DFT also predicts the split-off of 1D electron-like step and terrace bands dispersing parallel to surface steps., This research was supported by the CERCA Programme/Generalitat de Catalunya, and funded by the Spanish Ministry of Science, Innovation and Universities (Grants MAT2016-78293-C6 (2-R, 4-R and 6-R), MAT-2017-88374-P and Severo Ochoa No. SEV-2017-0706), the Basque Government (Grant IT-1255-19), the regional Government of Aragón (RASMIA project) and the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (Contract No. EFA 194/16 TNSI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of 4f filling on electronic and magnetic properties of rare earth-Au surface compounds

  • Fernández, Laura
  • Blanco-Rey, María
  • Castrillo-Bodero, Rodrigo
  • Ilyn, Max
  • Ali, Khadiza
  • Turco, Elia
  • Corso, Martina
  • Ormaza, Maider
  • Gargiani, Pierluigi
  • Valbuena, Miguel A.
  • Mugarza, Aitor
  • Moras, Paolo
  • Sheverdyaeva, P. M.
  • Kundu, A. K.
  • Jugovac, M.
  • Laubschat, Clemens
  • Ortega, J. Enrique
  • Schiller, Frederik
One-atom-thick rare-earth/noble metal (RE-NM) compounds are attractive materials to investigate two-dimensional magnetism, since they are easy to synthesize into a common RE-NM2 structure with high crystal perfection. Here we perform a comparative study of the GdAu2, HoAu2, and YbAu2 monolayer compounds grown on Au(111). We find the same atomic lattice quality and moiré superlattice periodicity in the three cases, but different electronic properties and magnetism. The YbAu2 monolayer reveals the characteristic electronic signatures of a mixed-valence configuration in the Yb atom. In contrast, GdAu2 and HoAu2 show the trivalent character of the rare-earth and ferromagnetic transitions below 22 K. Yet, the GdAu2 monolayer has an in-plane magnetic easy-axis, versus the out-of-plane one in HoAu2. The electronic bands of the two trivalent compounds are very similar, while the divalent YbAu2 monolayer exhibits different band features. In the latter, a strong 4f–5d hybridization is manifested in neatly resolved avoided crossings near the Fermi level. First principles theory points to a residual presence of empty 4f states, explaining the fluctuating valence of Yb in the YbAu2 monolayer., This work was supported in part by the Spanish MINECO (MAT-2017-88374-P, MAT2016-78293-C6, FIS2016-75862-P, PGC2018-098613-B-C21, SEV-2017-0706 and SEV-2016-0686), the Spanish Research Agency (PID2019-107338RB-C65), Basque Government Project IT-1255-19, and University of the Basque Country (UPV/EHU) grant GIU18/138 and the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (Contract No. EFA 194/16 TNSI). The experiments at Elettra were supported by the EU Calipso project and computational resources were provided by the DIPC computing center. L. F. acknowledges financial support from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement MagicFACE No 797109. A. K. K., M. J., P. M. S. and P. M. acknowledge the project EUROFEL-ROADMAP ESFRI., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On-surface synthesis of chlorinated narrow graphene nanoribbon organometallic hybrids

  • Zuzak, Rafał
  • Brandimarte, Pedro
  • Olszowski, Piotr
  • Izydorczyk, Irena
  • Markoulides, Marios
  • Such, Bartosz
  • Kolmer, Marek
  • Szymonski, Marek
  • Garcia-Lekue, Aran
  • Sánchez-Portal, Daniel
  • Gourdon, André
  • Godlewski, Szymon
Graphene nanoribbons (GNRs) and their derivatives attract growing attention due to their excellent electronic and magnetic properties as well as the fine-tuning of such properties that can be obtained by heteroatom substitution and/or edge morphology modification. Here, we introduce graphene nanoribbon derivatives—organometallic hybrids with gold atoms incorporated between the carbon skeleton and side Cl atoms. We show that narrow chlorinated 5-AGNROHs (armchair graphene nanoribbon organometallic hybrids) can be fabricated by on-surface polymerization with omission of the cyclodehydrogenation reaction by a proper choice of tailored molecular precursors. Finally, we describe a route to exchange chlorine atoms connected through gold atoms to the carbon skeleton by hydrogen atom treatment. This is achieved directly on the surface, resulting in perfect unsubstituted hydrogen-terminated GNRs. This will be beneficial in the molecule on-surface processing when the preparation of final unsubstituted hydrocarbon structure is desired., This work was supported by the National Science Center, Poland (2019/35/B/ST5/02666), and the EU Project PAMS (610446). A.G.L., D.S.P., and P.B. acknowledge the Spanish Agencia Estatal de Investigación (Grants MAT2016-78293-C6-4-R, PID2019-107338RB-C66, and FIS2017-83780-P), Dep. Educación of the Basque Government and UPV/EHU (Grant IT-756-13), and the European Union (EU) through Horizon 2020 (FET-Open project SPRING Grant 863098) for support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Emerging magnetism in boron-doped graphene nanoribbons

  • Brandimarte, Pedro
  • Friedrich, Niklas
  • Li, Jingcheng
  • Saito, Shohei
  • Yamaguchi, Shigehiro
  • Pozo, Iago
  • Peña, Diego
  • Frederiksen, Thomas
  • Garcia-Lekue, Aran
  • Sánchez-Portal, Daniel
  • Pascual, José I.
Trabajo presentado al Symposium on Surface Science (3S), celebrado en Austria del 1 al 7 de marzo de 2020., Support by the European Union FET Open project SPRING (grant 863098) and by the Spanish Ministry of Economy and Competitiveness, MINECO (grants FIS2017-83780-P and MAT2016-78293-C6)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Probing the magnetism of topological end-states in 5-armchair graphene nanoribbons

  • Lawrence, James
  • Brandimarte, Pedro
  • Berdonces-Layunta, Alejandro
  • Mohammed, Mohammed S. G.
  • Grewal, Abhishek
  • Leon, Christopher C.
  • Sánchez-Portal, Daniel
  • Oteyza, Dimas G. de
Trabajo presentado al Symposium on Surface Science (3S), celebrado en Austria del 1 al 7 de marzo de 2020., We acknowledge funding from the European Union’s Horizon 2020 programme (Grant Agreement Nos. 635919 and 863098 from ERC and FET Open projects, respectively), from the Spanish MINECO (Grant Nos. FIS2017-83780-P and MAT2016-78293-C6) and from the University of the Basque Country (Grant IT1246-19). D. G. O. thanks the Alexander von Humboldt Foundation for supporting his research stay at the MPI, and Klaus Kern for hosting him., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Theory of ultrafast electron transfer from localized quantum states at surfaces

  • Müller, Moritz
Doctoral Thesis Submitted to the University of the Basque Country for the Degree of Doctor in Physics., [EN]: The ability of materials to transfer electrons is a basic property controlling the functionality and performance of devices at the nanoscale. Of particular importance is the tranfor of electros at surfaces as a fundamental process in catalytic and photocatalytic applications. This work aims along these lines at a theoretical description of resonant charge injection at surfaces using a combination of density functional theory and Green's functions. A close comparison with available data from core-hole-clock experiments is maintained throughout the work and confirms the validity and predictive power of our first-principles approach. This is demonstrated on the basis of three prototypical systems where we study fundamental aspects of charge transfer, providing additional, often complementary information to the interpretation of the experiments. First, we present a detailed study of the effects of structural fluctuations on elastic charge transfer for isonicotinic acid adsorbed on rutile (110) in relation to photovoltaic applications. Second we explore spin-dependent charge injection from core-excited argon resonances on Co(0001) and Fe(110), with possible implications for spintronics. Third, we examine the directionality of charge transfer from sulfur related resonances at surfaces of layered 1T-TaS2 in the commensurate charge density wave phase., [ES]: Los procesos de transferencia de electrones son fundamentales tanto en la Naturaleza y como para gran cantidad de aplicaciones tecnológicas. Una comprensión detallada de su funcionamiento en la escala atómica es de gran importancia para el diseño de nuevos materiales y dispositivos. En particular, la transferencia de electrones tiene lugar en reacciones catalíticas y foto-catalíticas, así como en celdas electroquímicas y distintos dispositivos generadores de energía solar como las células solares “sensibilizadas” por colorantes (en inglés “dye-sensitized solar cells”, DSSCs). En este tipo de situaciones, con frecuencia la transferencia electrónica tiene lugar en una superficie o a través de una interfase, mientras el electrón transferido normalmente procede de una unidad química donora, como un átomo o una molécula absorbidos sobre o cercanos a dicha superficie. Las técnicas experimentales modernas son capaces de estudiar estos procesos en detalle, accediendo a sus escalas espaciales y temporales fundamentales (el nanometro y el femtosegundo). Sin embargo, en sistemas grandes y/o complejos diversos procesos pueden interferir, complicando la descripción. Por dicha razón es preferible estudiar sistemas sencillos que pueden ser estudiados tanto de forma teórica como experimental y comprendidos con modelos relativamente simples. La presente Tesis se ocupa de describir procesos elásticos de transferencia electrónica en superficies utilizando cálculos de primeros principios. En particular, desarrollamos un método que combina el uso funciones de Green con la información obtenida a partir de cálculos del funcional de la densidad (en inglés “density functional theory”, DFT) para realizar una descripción realista de los procesos de transferencia electrónica resonante en superficies. Los tiempos de transferencia de carga así calculados son comparados, con frecuencia de forma muy favorable, con los extraídos de experimentos que utilizan la técnica de espectroscopía “con cronometraje por hueco interno” (en inglés “core-hole-clock spectroscopy”)., I gratefully acknowledge the EU-FP7 project THINFACE (grant No. 607232) for financial support through Nanogune and training, the Spanish MINECO (grant No. MAT2016-78293-C6-4-R) for funding, the Centro de Física de Materiales (CFM) for providing work space, and the Donostia International Physics Center (DIPC) for financial support as well as computational time at the DIPC computing center and Daniel Franco as well as Diego Lasa for expert computational support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Lateral interactions and order–disorder phase transitions of metal phthalocyanines on Ag(111)

  • Fernández, Laura
  • Thussing, Sebastian
  • Brión-Rios, Anton X.
  • Sánchez-Portal, Daniel
  • Jakob, Peter
The intermolecular interaction among phthalocyanine molecules deposited on Ag(111) has been investigated at submonolayer coverages. By means of infrared absorption spectroscopy and spot-profile analysis low-energy electron diffraction, unambiguous evidence for an attractive interaction between neighboring titanyl-phthalocyanine (TiOPc) molecules is found for dilute layers, which is in contrast to the intermolecular repulsion reported for the copper-phthalocyanine (CuPc)/Ag(111) system. Accordingly, the formation of dense two-dimensional islands of TiOPc molecules with a well-defined long-range order (commensurate phase) is observed upon cooling to temperatures below 75 K, while a disordered arrangement is retained for adsorbed CuPc. Using density functional theory (DFT) calculations as a guide, these differences have been traced to the competition of attractive van der Waals and repulsive electrostatic interactions. Specifically, the vertically oriented molecular dipoles are substantially smaller for adsorbed TiOPc as compared to CuPc due to a compensation of the oppositely oriented dipole moments arising from the Pauli push-back effect on the one hand and the internal molecular dipole associated with the axial Ti–O group on the other. A detailed account and comparison of the molecule–substrate interaction, molecular binding geometries, and intermolecular interactions of TiOPc and CuPc on the Ag(111) surface are provided in a theoretical analysis based on DFT., We gratefully acknowledge support from the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation), Project ID 223848855-SFB 1083 “Structure and Dynamics of Internal Interfaces”. L.F. acknowledges financial support from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement MagicFACE no. 797109. D.S.-P. and A.X.B.-R. acknowledge the Spanish Agencia Estatal de Investigación (grant nos. MAT2016-78293-C6-4-R and PID2019-107338RB-C66) and Dep. Educación of the Basque Government and UPV/EHU (grant no. IT1246-19) for support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A large starphene comprising pentacene branches

  • Holec, Jan
  • Cogliati, Beatrice
  • Lawrence, James
  • Berdonces-Layunta, Alejandro
  • Herrero-Gómez, P.
  • Nagata, Yuuya
  • Banasiewicz, Marzena
  • Kozankiewicz, Boleslaw
  • Corso, Martina
  • Oteyza, Dimas G. de
  • Jancarik, Andrej
  • Gourdon, André
Starphenes show promising optoelectronic properties. Notably, HOMO–LUMO energy gap presumably decreases with their increasing size, making larger homologues extremely desirable. Unfortunately, with the size, their instability and insolubility also increase, challenging classical synthetic ways. A new method has been developed, enabling synthesis of large starphenes in a quantity sufficient for their full characterisation and further applications., Starphenes are attractive compounds due to their characteristic physicochemical properties that are inherited from acenes, making them interesting compounds for organic electronics and optics. However, the instability and low solubility of larger starphene homologs make their synthesis extremely challenging. Herein, we present a new strategy leading to pristine [16]starphene in preparative scale. Our approach is based on a synthesis of a carbonyl-protected starphene precursor that is thermally converted in a solid-state form to the neat [16]starphene, which is then characterised with a variety of analytical methods, such as 13C CP-MAS NMR, TGA, MS MALDI, UV/Vis and FTIR spectroscopy. Furthermore, high-resolution STM experiments unambiguously confirm its expected structure and reveal a moderate electronic delocalisation between the pentacene arms. Nucleus-independent chemical shifts NICS(1) are also calculated to survey its aromatic character., This research has been funded in parts by foundation EXPERIENTIA, ERDF/ESF “UOCHB MSCA Mobility” (No. CZ.02.2.69/0.0/0.0/17 050/0008490), and has received funding from the EraNET Cofund Initiatives Quan-tERA under the European Union's Horizon 2020 research and innovation programme grant agreement ORQUID. This project has received financial support from the CNRS through the MITI interdisciplinary programs and JST-ERATO (No. JPMJER1903) and JSPS-WPI. Financial support is also acknowledged from the Spanish Ministry of Science and Innovation (MAT2016-78293-C6, PID2019-107338RB-C63), from the Basque Government (IT-1255-19), from the Spanish National Research Council (CSIC, COOPB20432), from the Euro-pean Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (contract no. EFA 194/16 TNSI) and from the European Research Council (grant agreement no. 635919). The authors thank Yannick Coppel (LCC-CNRS, Toulouse) for recording CP-MAS spectra, Jean-Francois Meunier (LCC-CNRS, Toulouse) for thermogravimetric analysis and Vladimir Vrkoslav (IOCB-Prague) for recording MS MALDI spectra., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Challenges in the synthesis of corannulene-based non-planar nanographenes on Au(111) surfaces

  • Wang, Tao
  • Lawrence, James
  • Sumi, Naoya
  • Robles, Roberto
  • Castro-Esteban, Jesús
  • Rey, Dulce
  • Mohammed, Mohammed S. G.
  • Berdonces-Layunta, Alejandro
  • Lorente, Nicolás
  • Pérez, Dolores
  • Peña, Diego
  • Corso, Martina
  • Oteyza, Dimas G. de
The on-surface synthesis of non-planar nanographenes is a challenging task. Herein, with the aid of bond-resolving scanning tunneling microscopy (BRSTM) and density functional theory (DFT) calculations, we present a systematic study aiming at the fabrication of corannulene-based nanographenes via intramolecular cyclodehydrogenation on a Au(111) surface. The formation of non-planar targeted products is confirmed to be energetically unfavorable compared to the formation of planar/quasi-planar undesired competing monomer products. In addition, the activation of intermolecular coupling further inhibits the formation of the final targeted product. Although it was not possible to access the corannulene moiety by means of on-surface synthesis, partial cyclodehydrogenation of the molecular precursors was demonstrated., This work was financially supported by the Spanish Agencia Estatal de Investigacion (PID2019-107338RB-C62, PID2019-107338RB-C63, PID2019-110037GB-I00 and MAT2016-78293-C6; AEI/FEDER, UE), the Basque Government (IT-1255-19), the European Union’s Horizon 2020 Program (Grant No. 863098), the Xunta de Galicia (Centro singular de investigacion de Galicia accreditation 2019–2022, ED431G 2019/03), the European Union (European Regional Development Fund-ERDF), and European Union’s Horizon 2020 Research and Innovation Programme under the project MEMO (Grant No. 766864)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Digging Ti interstitials at the r-TiO2(1 1 0) surface: Mechanism of porphyrin Ti sequestration by iminic N nucleophilic attack

  • Kremer, Markus K.
  • Forrer, Daniel
  • Rogero, Celia
  • Floreano, Luca
  • Vittadini, Andrea
Ti interstitials are key actors in the reduction/re-oxidation processes of TiO2. The charge redistribution originated by these point defects is acknowledged to trigger the dissociation of small molecules at the surface, while the direct involvement of Ti interstitials in reactions with adsorbates is an open question. From a combined experimental and theoretical investigation, we show how the potential energy surface for the outdiffusion of Ti interstitials at rutile-TiO2(1 1 0) is strongly lowered by adsorbed porphyrins, independently of their peripheral terminations. The process is activated by a nucleophilic attack of an iminic N to a surface 6-fold coordinated Ti atom, which is sequestrated by the porphyrin and replaced by a subsurface interstitial. From comparison with acidic porphyrins, we show that Ti extraction is specifically driven by the Lewis basicity of iminic N, which opens the pathway to the chemical reaction of Ti interstitials with a larger class of molecular systems., C.R. acknowledges funding from the Spanish Ministry of Economy and Competitiveness (grant MAT2016–78293–C6–5–R [AEI/ERDF, EU]) and from the Basque Government (grant IT–1255–19). L.F. acknowledges funding's from the Italian Ministry of Research and University through EUROFEL project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

From starphenes to non-benzenoid linear conjugated polymers by substrate templating

  • Mohammed, Mohammed S. G.
  • Lawrence, James
  • García, Fátima
  • Brandimarte, Pedro
  • Berdonces-Layunta, Alejandro
  • Pérez, Dolores
  • Sánchez-Portal, Daniel
  • Oteyza, Dimas G. de
Combining on-surface synthetic methods with the power of scanning tunneling microscopy to characterize novel materials at the single molecule level, we show how to steer the reactivity of one anthracene-based precursor towards different product nanostructures. Whereas using a Au(111) surface with three-fold symmetry results in the dominant formation of a starphene derivative, the two-fold symmetry of a reconstructed Au(110) surface allows the selective growth of non-benzenoid linear conjugated polymers. We further assess the electronic properties of each of the observed product structures via tunneling spectroscopy and DFT calculations, altogether advancing the synthesis and characterization of molecular structures of notable scientific interest that have been only scarcely investigated to date, as applies both to starphenes and to non-benzenoid conjugated polymers., We acknowledge funding from the European Union's Horizon 2020 programme (Grant Agreement No. 635919 and 863098), from the Spanish Agencia Estatal de Investigación (Grant No. MAT2016-78293-C6, PID2019-107338RB-C63, PID2019-107338RB-C66 and FIS2017-83780-P), Xunta de Galicia (Centro singular de investigación de Galicia, accreditation 2019–2022, ED431G 2009/03), Dep. Educación of the Basque Government and UPV/EHU (Grant No. IT-756-13), and the European Regional Development Fund (ERDF)., Peer reviewed