Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Deposition od Al2O3 nanostructured powders by Atmospheric Plasma Spraying

  • Sánchez, E.
  • Bannier, E.
  • Cantavella, V.
  • Morgiel, J.
  • Grzonka, J.
  • Boccaccini, A. R.
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Klyatskina, Elizaveta
[EN] Al(2)O(3)-13%TiO(2) coatings were deposited on stainless steel substrates from conventional and nanostructured powders using atmospheric plasma spraying (APS). A complete characterization of the feedstock confirmed its nanostructured nature. Coating microstructures and phase compositions were characterized using SEM, TEM, and XRD techniques. The microstructure comprised two clearly differentiated regions. One region, completely fused, consisted mainly of nanometer-sized grains of gamma-Al(2)O(3) with dissolved Ti(+4). The other region, partly fused, retained the microstructure of the starting powder and was principally made up of submicrometer-sized grains of alpha-Al(2)O(3), as confirmed by TEM. Coating microhardness as well as tribological behavior were determined. Vickers microhardness values of conventional coatings were in average slightly lower than the values for nanostructured coating. The wear resistance of conventional coatings was shown to be lower than that of nanostructured coatings as a consequence of Ti segregation. A correlation between the final properties, the coating microstructure, and the feedstock characteristics is given., The authors thank the EU Network of Excellence Knowledge-based Multicomponent Materials for Durable and Safe Performance (KMM-NoE, NMP3-CT-2004-502243) for financial support. They are also grateful for the support of the Valencian Institute of Small and Medium-Sized Enterprises (IMCITA/2005/2-IMCOCA/2006/1) and of the Spanish Department for Education and Sciences (MAT2006-12945-C03).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of plasma intensity on wear and erosion resistance of conventional and nanometric WC-Co coatings deposited by APS

  • Bonache Bezares, Victoria
  • García, J.C.
  • Sánchez, E.
  • Bannier, E.
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
The effects of plasma intensity and powder particle size on wear and erosion resistance have been evaluated for WC-12 wt.%Co coatings deposited by Air Plasma Spraying. Coatings were deposited from micrometric and nanostructured powders. SEM and XRD characterization showed the presence of WC, W 2C, W, and an amorphous Co-rich matrix. The performance of the different coatings was compared in sliding wear tests (ball-on-disk), under dry friction conditions. Wear debris and tracks were analyzed by SEM. The debris generated during the test was found to have a great influence on the sliding properties. Wear follows a "three-body abrasive mechanism" and is dominated by coating spallation because of sub-surface cracking. In order to evaluate erosion behavior, solid particle erosion tests were conducted. Eroded coatings were analyzed by SEM, and erosion mainly occurs by a "cracking and chipping mechanism." The study shows that wear and erosion behavior is strongly affected by plasma arc intensity. © 2010 ASM International., This study has been conducted with the support of the Spanish Ministry of Education and Science under projects MAT 2006-12945 and MAT 2009-14144.