Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Laser-induced periodic surface structures on P3HT and on its photovoltaic blend with PC71BM

  • Cui, Jing
  • Rodríguez-Rodríguez, Álvaro
  • Hernández, Margarita
  • García-Gutiérrez, Mari Cruz
  • Nogales, Aurora
  • Castillejo, Marta
  • Moseguí González, Daniel
  • Müller-Buschbaum, P.
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
8 págs.; 9 figs., We describe the conditions for optimal formation of laser-induced periodic surface structures (LIPSS) over poly(3-hexylthiophene) (P3HT) spin-coated films. Optimal LIPSS on P3HT are observed within a particular range of thicknesses and laser fluences. These conditions can be translated to the photovoltaic blend formed by the 1:1 mixture of P3HT and [6,6]-phenyl C-butyric acid methyl ester (PCBM) when deposited on an indium tin oxide (ITO) electrode coated with (poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS). Solar cells formed by using either a bilayer of P3HT structured by LIPSS covered by PCBM or a bulk heterojunction with a P3HT:PCBM blend structured by LIPSS exhibit generation of electrical photocurrent under light illumination. These results suggest that LIPSS could be a compatible technology with organic photovoltaic devices. Copyright © 2016 American Chemical Society, This work has been supported by Spanish Ministry of Economy under the projects CTQ 2013-43086-P, MAT2014-59187-R, and MAT2015-66443-C02-1-R. J.C. acknowledges the China Scholarship Council for funding her research (File NO. 201207040083). E.R. and A.R-R thank MINECO for the tenure of a Ramón y Cajal contract (No. RYC-2011-08069) and FPI (BES-2013-062620) contracts, respectively. P.M.-B. and D.M.G. acknowledge financial support by TUM.solar in the frame of the Bavarian Collaborative Research Project “Solar technologies go Hybrid” (SolTec), by the GreenTech Initiative (Interface Science for PhotovoltaicsISPV) of the EuroTech Universities and by the Nanosystems Initiative Munich (NIM). We thank Daniel Hermida and Wim Bras for outstanding support during beamtime in DUBBLE at ESRF. Fruitful comments of A. Urbina are gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Comparative study on the properties of poly(trimethylene terephthalate) -based nanocomposites containing multi-walled carbon (MWCNT) and tungsten disulfide (INT-WS2) nanotubes

  • Paszkiewicz, S.
  • Szymczyk, A.
  • Janowska, I.
  • Jedrzejewski, R.
  • Linares, Amelia
  • Ezquerra, Tiberio A.
  • Wagner, H. D.
  • Tenne, R.
  • Roslaniec, Z.
13 pags., 9 figs., 7 tabs., Multi-walled carbon (MWCNT) and tungsten disulfide (INT-WS) nanotubes are materials with excellent mechanical properties, high electrical and thermal conductivity. These special properties make them excellent candidates for high strength and electrically conductive polymer nanocomposite applications. In this work, the possibility of the improvement of mechanical, thermal and electrical properties of poly(trimethylene terephthalate) (PTT) by the introduction of MWCNT and INT-WS nanotubes was investigated. The PTT nanocomposites with low loading of nanotubes were prepared by in situ polymerization method. Analysis of the nanocomposites' morphology carried out by SEM and TEM has confirmed that well-dispersed nanotubes in the PTT matrix were obtained at low loading (<0.5 wt%). Thermal and thermo-oxidative stability of nanocomposites was not affected by the presence of nanotubes in PTT matrix. Loading with INT-WS up to 0.5 wt% was insufficient to ensure electrical conductivity of PTT nanocomposite films. In the case of nanocomposites filled with MWCNT, it was found that nanotube incorporation leads to increase of electrical conductivity of PTT films by 10 orders of magnitude, approaching a value of 10 S/cm at loading of 0.3 wt%. Tensile properties of amorphous and semicrystalline (annealed samples) nanocomposites were affected by the presence of nanotubes. Moreover, the increase in the brittleness of semicrystalline nanocomposites with the increase in MWCNT loading was observed, while the nanocomposites filled with INT-WS were less brittle than neat PTT. Copyright © 2016 John Wiley & Sons, Ltd., Dr Sandra Paszkiewicz thanks financial support from West Pomeranian University of Technology (Dean's grant for young scientists). Prof. H.D. Wagner is the recipient of the Livio Norzi Professorial Chair in Materials Science. Prof. Reshef Tenne and Prof. H.D. Wagner acknowledge the FTA project of the Israel National NanoInitiative, H. Perlman Foundation and the Irving and Azelle Waltcher Foundations in honor of Prof. M. Levy. Dr. Amelia Linares and Prof. Tiberio A. Ezquerra thank MINECO (Spain) for grant MAT2015-66443-C02-1-R. Authors would like to thank DuPont Tate & Lyle BioProducts company for providing bio-1,3-propanediol for experimental use., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrical conductivity and transparency of polymer hybrid nanocomposites based on poly(trimethylene terephthalate) containing single walled carbon nanotubes and expanded graphite

  • Paszkiewicz, S.
  • Szymczyk, A.
  • Sui, X .M.
  • Wagner, H. D.
  • Linares, Amelia
  • Cirera, A.
  • Varea, A.
  • Ezquerra, Tiberio A.
  • Rosłaniec, Z.
9 pags., 10 figs., Single-walled carbon nanotubes (SWCNT)/expanded graphite (EG)/poly(trimethylene terephthalate) (PTT) hybrid nanocomposites were prepared via in situ polymerization. Raman spectroscopy and scanning electron microscopy (SEM) were employed to determine both, purity and morphology of the nanofillers and the dispersion of nanotubes and nanosheets. The electrical and optical properties of thin polymer films based on both “single” nanocomposites and hybrid nanocomposites were studied. For PTT/SWCNT nanocomposites, results confirmed that films optical transmittance decreases as the concentration of SWCNT increases, attaining almost no optical transmittance for 0.3 wt % of nanofiller. Conversely, the electrical conductivity of nanocomposites was found to increase by increasing the nanofiller amount and the σ values indicate that percolation occurs at a very low SWCNT content (around 0.05 wt %). In the case of PTT/SWCNT + EG nanocomposites, when the content of SWCNT is 0.05%, the hybrid system presents lower conductivity than that corresponding to the “single” nanocomposite. The incorporation of additional EG to the PTT/SWCNT nanocomposite has a small effect on the electrical conductivity but inhibits the transparency of the system. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 44370., National Science Centre, Poland . Grant Number: 2013/11/N/ST8/00404 MINECO, Spain . Grant Numbers: MAT2012-33517, MAT2015-66443-C02-1-R, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrically and thermally conductive thin elastic polymer foils containing SiC nanofibers

  • Paszkiewicz, S.
  • Taraghi, I.
  • Szymczyk, A.
  • Huczko, A.
  • Kurcz, M.
  • Przybyszewski, B.
  • Stanik, R.
  • Linares, Amelia
  • Ezquerra, Tiberio A.
  • Roslaniec, Z.
6 pags., 6 figs., Design and experiment of polymeric nanocomposites (NCs) for photovoltaic applications with outstanding electrical and thermal properties has been investigated with the introduction of SiC nanofibers (NFs) into the poly(trimethylene terephthalate)-block-poly(tetramethylene oxide) (PTT-PTMO) copolymers. In order to enhance the electrical and thermal conductivity, different concentrations of SiC NFs, ranging from 0.1 to 3.0 wt %, have been selected to mix with PTT-PTMO via in situ polymerization method. This reaction method is an excellent choice for incorporation of high amount of SiC NFs (3 wt %) into the polymer that was confirmed by morphological studies. From dielectric spectroscopy studies a percolating behavior was confirmed at low percolation threshold (less than 2% wt %). Furthermore, the 15% increment for thermal conductivity appeared with combination of 0.5 wt % SiC NFs with PTT-PTMO copolymers, which can be affected by manufacturing process of NCs, state of nanofillers dispersion and aspect ratio of nanofillers., Sandra Paszkiewicz would like to thank for financial support from West Pomeranian University of Technology (Dean's Grant for Young Scientists). Amelia Linares and Tiberio A. Ezquerra acknowledge the financial support provided by MINECO (grant MAT2015-66443-C02-1-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Formation of polymer nanoparticles by UV pulsed laser ablation of poly (bisphenol A carbonate) in liquid environment

  • Martínez-Tong, Daniel E.
  • Sanz, Mikel
  • Ezquerra, Tiberio A.
  • Nogales, Aurora
  • Marco, J.F.
  • Castillejo, Marta
  • Rebollar, Esther
8 pags., 9 figs. 2 tabs., Suspensions of poly(bisphenol A carbonate) (PBAC) nanoparticles of varying size and shape have been produced by ablation of a PBAC target in liquid media with the fourth harmonic of a Q-switched Nd:YAG laser (wavelength 266 nm, full width at half maximum 4 ns, repetition rate 10 Hz). The polymer target was placed at the bottom of a rotating glass vessel filled with around a 10 mm column of liquid. Laser ablation in water leads to spherical nanoparticles with diameters of several tens of nanometers for fluences close to 1 J/cm. Ablation at lower fluences, around 0.1 J/cm, results in the production of nanoparticles of smaller diameters and also of non-spherical nanoparticles. Additional irradiations at the fluence of 0.1 J/cm were performed in several liquid media with different properties, in terms of density, viscosity, thermal conductivity, boiling temperature, isothermal compressibility and polarity. The different size distributions observed were related to the thermal conductivity of the systems, while their viscosity seems to be responsible for the development of nanostructures with different morphologies., AcknowledgementsThe authors gratefully acknowledge financial support fromthe MINECO (CTQ 2013-43086-P, MAT2014-59187-R, MAT2015-66443-C02-1-R). D.E.M. thanks CSIC for the tenure of JAE-Prefellowship and Fondo Social Europeo (FSE) for cofinancing the JAEProgram. E.R. also thanks MINECO for a Ramón y Cajal contract(RYC-2011-08069)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of substrate and film thickness on polymer LIPSS formation

  • Cui, Jing
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
7 pags., 6 figs., 3 tabs., Here we focus on the influence of both, substrate and film thickness on polymer Laser Induced Periodic Surface Structures (LIPSS) formation in polymer films. For this aim a morphological description of ripples structures generated on spin-coated polystyrene (PS) films by a linearly polarized laser beam with a wavelength of 266 nm is presented. The influence of different parameters on the quality and characteristics of the formed laser-induced periodic surface structures (LIPSS) was investigated. We found that well-ordered LIPSS are formed either on PS films thinner than 200 nm or thicker than 400 nm supported on silicon substrates as well as on thicker free standing films. However less-ordered ripples are formed on silicon supported films with intermediate thicknesses in the range of 200–380 nm. The effect of the thermal and optical properties of the substrate on the quality of LIPSS was analyzed. Differences observed in the fluence and number of pulses needed for the onset of surface morphological modifications is explained considering two main effects which are: (1) The temperature increase on polymer surface induced by the action of cumulative laser irradiation and (2) The differences in thermal conductivity between the polymer and the substrate which strongly affect the heat dissipation generated by irradiation., This work has been supported by Spanish Ministry of Economy and Competitiveness (MINECO) through projects CTQ2013-43086-P, MAT2014-59187-R, and MAT2015-66443-C02-1-R. J.C acknowledges the China Scholarship Council for funding her research (File NO. 201207040083). E.R. also thanks MINECO for a Ramón y Cajal contract (RYC-2011-08069)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Laser induced periodic surface structures on polymer nanocomposites with carbon nanoadditives

  • Rodríguez-Beltrán, René, I.
  • Paszkiewicz, S.
  • Szymczyk, A.
  • Roslaniec, Z.
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Castillejo, Marta
  • Moreno, Pablo
  • Rebollar, Esther
7 pags., 7 figs., tab., Laser induced periodic surface structures (LIPSS) are formed on poly(trimethylene terephthalate) and its composites with single-walled carbon nanotubes (SWCNT) and with both SWCNT and expanded graphite (EG) upon irradiation with a Q-Switched Nd:YAG laser (266 nm, 8 ns). The morphology of the polymer films was characterized by atomic force microscopy. A cantilever with a colloidal probe was used to obtain information about surface adhesion. Surface energies were estimated by contact angle measurements using different liquids. Chemical modification in the materials upon irradiation was assessed by Raman spectroscopy. Results show a dependence of the number of pulses required for LIPSS formation as a consequence of the presence of the carbon nanoadditive and an increase of the hydrophilic character of surfaces after irradiation. Moreover, the polar component of the surface free energy changes significantly and surface adhesion increases by the addition of the additive to the polymer matrix. Additionally, the adhesion force decreases after laser nanostructuring as a consequence of a lower contact area in the nanostructured material., The authors gratefully acknowledge financial support from the MINECO (FIS2013-44174-P, MAT2014-59187-R, MAT2015-66443-C02-1-R, FIS2015-71933-REDT, CTQ2016- 75880-P) and Junta de Castilla y León (Project SA046U16). RIR is grateful for the International Scholarship number 314197 provided by Consejo Nacional de Ciencia y Tecnología (CONACyT-México) and E.R. thanks MINECO for a Ramón y Cajal contract (RYC- 2011-08069)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Quantitative Nanomechanical Properties of Multilayer Films Made of Polysaccharides through Spray Assisted Layer-by-Layer Assembly

  • Criado-González, Miryam
  • Rebollar, Esther
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Boulmedais, F.
  • Mijangos, Carmen
  • Hernández, Rebeca
9 pags., 8 figs., 2 tabs., Nanomechanical properties of alginate/chitosan (Alg/Chi) multilayer films, obtained through spray assisted layer-by-layer assembly, were studied by means of PeakForce quantitative nanomechanical mapping atomic force microscopy (PF-QNM AFM). Prepared at two different alginate concentrations (1.0 and 2.5 mg/mL) and a fixed chitosan concentration (1.0 mg/mL), Alg/Chi films have an exponential growth in thickness with a transition to a linear growth toward a plateau by increasing the number of deposited bilayers. Height, elastic modulus, deformation, and adhesion maps were simultaneously recorded depending on the number of deposited bilayers. The elastic modulus of Alg/Chi films was found to be related to the mechanism of growth in contrast to the adhesion and deformation. A comparison of the nanomechanical properties obtained for non-cross-linked and thermally cross-linked Alg/Chi films revealed an increase of the elastic modulus after cross-linking regardless alginate concentration. The incorporation of iron oxide nanoparticles (NPs), during the spray preparation of the films, gave rise to nanocomposite Alg/Chi films with increased elastic moduli with the number of incorporated NPs layers. Deformation maps of the films strongly suggested the presence of empty spaces associated with the method of preparation. Finally, adhesion measurements point out to a significant role of NPs on the increase of the adhesion values found for nanocomposite films., Financial support from MINECO (MAT2014-53437-C2-1-P, MAT2014-59187-R MAT2015-66443-C02-1-R and CTQ2013- 43086-P) is gratefully acknowledged. Rebeca Hernández and Esther Rebollar thank MEC for a Ramón y Cajal contract. Miryam Criado thanks MEC for a FPU fellowship and Técnicas Reunidas S.A. for financial support in Residencia de estudiantes., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Relaxations and relaxor-ferroelectric-like response of nanotubularly confined poly(vinylidene fluoride)

  • Martín, Jaime
  • Iturrospe, Amaia
  • Cavallaro, Andrea
  • Arbe, Arantxa
  • Stingelin, Natalie
  • Ezquerra, Tiberio A.
  • Mijangos, Carmen
  • Nogales, Aurora
Herein, we elucidate the impact of tubular confinement on the structure and relaxation behavior of poly(vinylidene difluoride) (PVDF) and how these affect the para-/ferroelectric behavior of this polymer. We use PVDF nanotubes that were solidified in anodic aluminum oxide (AAO) templates. Dielectric spectroscopy measurements evidence a bimodal relaxation process for PVDF nanotubes: besides the bulk-like α-relaxation, we detect a notably slower relaxation that is associated with the PVDF regions of restricted dynamics at the interface with the AAO pore. Strikingly, both the bulk-like and the interfacial relaxation tend to become temperature independent as the temperature increases, a behavior that has been observed before in inorganic relaxor ferroelectrics. In line with this, we observe that the real part of the dielectric permittivity of the PVDF nanotubes exhibits a broad maximum when plotted against the temperature, which is, again, a typical feature of relaxor ferroelectrics. As such, we propose that, in nanotubular PVDF, ferroelectric-like nanodomains are formed in the amorphous phase regions adjacent to the AAO interface. These ferroelectric nanodomains may result from an anisotropic chain conformation and a preferred orientation of local dipoles due to selective H-bond formation between the PVDF macromolecues and the AAO walls. Such relaxor-ferroelectric-like behavior has not been observed for nonirradiated PVDF homopolymer; our findings thus may enable in the future alternative applications for this bulk commodity plastic, e.g., for the production of electrocaloric devices for solid-state refrigeration which benefit from a relaxor-ferroelectric-like response., J.M. acknowledges support from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant, agreement No. 654682. A.A. and A.I. acknowledge financial support from the Spanish Ministry Ministerio de Economia y Competitividad (MINECO) (code: MAT2015-63704-P (MINECO/FEDER, UE)) and the Eusko Jaurlaritza (Basque Government) (code: IT-654-13). A.C. would like to acknowledge the financial support of the EPSRC (EP/M014142/1). A.N., T.A.E., and C.M. acknowledge financial support from MINECO (codes: MAT2014-59187-R, MAT2015-66443-C02-1-R, and MAT2014-53437-C2-1P, respectively). N.S. is in addition grateful for support from a European Research Council ERC Starting Independent Research Fellowship under the grant agreement No. 279587., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Chain orientation in bulk heterojunction photovoltaic thin films as revealed by Near Edge X-Ray Absorption Fine Structure

  • Gutiérrez-Fernández, Edgar
  • Rodríguez-Rodríguez, Álvaro
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
  • Valvidares, M.
  • Garciani, P.
  • García-Gutiérrez, Mari Cruz
Madrid from October 9-11, 2017. -- https://w3.ual.es/Congresos/AUSE/CONGRESO2017/index_congreso.html, This work has been supported by MINECO (Projects: MAT2014-59187-R, MAT2015-66443-C02-1-R, CTQ 2013- 43086-P)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Nanophase Separation in Laser Induced Periodic Surface Structures (LIPSS) on Bulk Heterogeneous Photovoltaic Thin Films as Revealed by Resonant Soft X-ray Scattering

  • Rodríguez-Rodríguez, Álvaro
  • García-Gutiérrez, Mari Cruz
  • Ezquerra, Tiberio A.
  • Brady, M. A.
  • Wang, C.
  • Rebollar, Esther
Madrid from October 9-11, 2017. -- https://w3.ual.es/Congresos/AUSE/CONGRESO2017/index_congreso.html, This work has been supported by Spanish Ministry of Economy and Competitiveness under the projects MAT2014-59187-R, MAT2015-66443-C02-1-R and CTQ2016-75880-P. E.R. and A.R-R thank MINECO for the tenure of a Ramón y Cajal contract (No. RYC-2011-08069) and FPI (BES-2013-062620) contracts, respectively., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Laser induced periodic surface structures formation by nanosecond laser irradiation of poly (ethylene terephthalate) reinforced with Expanded Graphite

  • Rodríguez-Beltrán, René, I.
  • Hernández, Margarita
  • Paszkiewicz, S.
  • Szymczyk, A.
  • Roslaniec, Z.
  • Ezquerra, Tiberio A.
  • Castillejo, Marta
  • Moreno, Pablo
  • Rebollar, Esther
We report on the formation of Laser Induced Periodic Surface Structures in poly (ethylene terephthalate) and poly (ethylene terephthalate)/Expanded Graphite films by laser irradiation with nanosecond pulses at 266 nm. The characterization studies show that the quality of the ripples depends strongly on the irradiation time and fluence and the optimal conditions for obtaining LIPSS are affected by the amount of the expanded graphite present in the film due to the differences in crystallinity, thermal conductivity and thermal diffusivity of the nanocomposites. Physicochemical modifications in the materials were inspected by Raman spectroscopy, the colloidal probe technique and contact angle measurements using different liquids. Results show that there is an increase of the hydrophilicity of the surfaces after laser irradiation together with an increase of the surface free energy and in particular of its polar component. Additionally, the adhesion force estimated by the colloidal probe technique increases after laser nanostructuring., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synergistic Effect of Fullerenes on the Laser-Induced Periodic Surface Structuring of Poly(3-Hexyl Thiophene)

  • Rodríguez-Rodríguez, Álvaro
  • Gutiérrez-Fernández, Edgar
  • García-Gutiérrez, Mari Cruz
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
Ordered and homogeneous laser-induced periodic surface structures (LIPSS) could be fabricated in poly(3-hexyl thiophene):[6,6]-phenyl C71-butyric acid methyl ester (P3HT:PC71BM) blends by using wavelengths in the ultraviolet (UV) range (266 nm). The absorption coefficient of PC71BM, which is maximum in its UV–Visible absorption spectrum around 266 nm, enhanced the overall absorption of the blend. In addition, PC71BM itself was capable of developing homogeneous LIPSS by laser irradiation at λlaser = 266 nm. Therefore, we proposed that the synergistic effect of PC71BM on the LIPSS formation in P3HT:PC71BM (1:1) was due to a templating effect for the LIPSS formation of the PC71BM itself, which added to the overall increment of the absorption of the blend. LIPSS formation at ambient conditions in this wavelength range led to chemical modification of both P3HT and PC71BM, which rendered to non-conducting samples. Irradiation in vacuum significantly reduced radiation damage, rendering to the characteristic electrical conductivity pattern observed in P3HT LIPSS samples irradiated in the visible range. This effect could be of potential interest in order to obtain LIPSS in low absorbing polymers., This work has been supported by the Spanish Ministry of Economy and Competitiveness under the projects MAT2014-59187-R, MAT2015-66443-C02-1-R and CTQ2016-75880-P. E.R. thanks MINECO for the tenure of a Ramón y Cajal contract (No. RYC-2011-08069, We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Laterally-resolved mechanical and tribological properties of laser-structured polymer nanocomposites

  • Rodríguez-Beltrán, René I.
  • Martínez-Tong, Daniel E.
  • Reyes-Contreras, Adela
  • Paszkiewicz, Sandra
  • Szymczyk, Anna
  • Ezquerra, Tiberio A.
  • Moreno, Pablo
  • Rebollar, Esther
In this work, we report on a detailed quantitative nanomechanical mapping of free-standing films of poly(ethylene terephthalate) (PET) and the composite PET/expanded graphite (EG) with 0.4% in weight of the nanoadditive, and of these materials nanostructured by laser irradiation. By using atomic force microscopy, we obtained simultaneously the topography, surface elastic modulus and adhesion force maps of the materials. Young’s modulus images exhibited higher values for the composite in comparison to those of the neat polymer and for the nanostructured films in contrast to the non-nanostructured ones. Additionally, we explored the tribological properties of these systems at the nanoscale. Using lateral force microscopy, we observed a decrease in the friction coefficient for the nanocomposite as compared to the neat polymer, while quantifying an increase for both laser-structured samples. Our results are discussed taking into consideration the possible changes that the samples might undergo during processing, as well as the changes imposed by the complex geometry of the nanometric features in these laterally-resolved mechanical measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Functional nanostructured surfaces induced by laser on fullerene thin films

  • Gutiérrez-Fernández, Edgar
  • Rodríguez-Rodríguez, Álvaro
  • García-Gutiérrez, Mari Cruz
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
We report a method to produce nanosecond pulsed laser induced periodic surface structures (LIPSS) on spin-coated [6,6]‑phenyl C71-butyric acid methyl ester (PCBM) films exhibiting a photoinduced resist-free imprinting (PRI) property. LIPSS in PCBM are resist free and can be solvent developed, under certain conditions, leaving the laser illuminated zone as an undissolved residue. LIPSS prepared with a wavelength of 532 nm selectively preserve the electrical conductivity on the LIPSS valleys. The heterogeneous conducting pattern consisting in conducting valleys and less conducting hills observed in the LIPSS has been interpreted as due to a reduction in the crystallinity of the hills provoked by the fast heating/cooling process induced by every laser pulse. On the basis of the experiments we propose that irradiated PCBM films: i) suffer a fast heating/cooling process tending to reduce the overall crystallinity of the LIPSS and therefore decreasing the electrical conductivity of the hills while leaving a remnant conducting film underneath the hills, ii) during laser irradiation the sample suffers a heat treatment leading to the development of a buried phase with enhanced crystallinity, close to the silicon substrate, formed by larger crystals with enhanced electrical conductivity and iii) further solvent treatment reveals the buried phase which remains in the form of partially electrically conducting nanowires. These results point towards the potential use of the described technology for nanofabrication of organic electronic devices., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Resonant soft x-ray scattering unravels the hierarchical morphology of nanostructured bulk heterojunction photovoltaic thin films

  • Rodríguez-Rodríguez, Álvaro
  • García-Gutiérrez, Mari Cruz
  • Ezquerra, Tiberio A.
  • Brady, M. A.
  • Wang, C.
  • Rebollar, Esther
Resonant soft x-ray scattering at the carbon K edge is shown to be an unambiguous approach to evaluate the phase segregation between donor and acceptor phases across the grooves of a laser-induced periodic surface nanostructure on a paradigmatic poly(3-hexylthiophene)/fullerene bulk heterojunction. By taking advantage of the use of polarized soft x rays, the results provide direct evidence that the formation of the nanostructure on the surface of the heterojunction induces not only additional phase separation of the two components but also a preferential directional arrangement of the different phases., The authors gratefully acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness (MINECO) through Projects MAT2014-59187-R, MAT2015-66443-C02 1-R and CTQ2016-75880-P. A.R.-R. and E.R. are indebted to MINECO for a FPI (BES-2013-062620) and Ramón y Cajal (RYC-2011-08069) contracts, respectively. This research used resources of the Advanced Light Source, which is a DOE Office of Science User Facility under contract no. DEAC02- 05CH11231, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Evidence of a 2D-Ordered Structure in Biobased Poly(pentamethylene furanoate) Responsible for Its Outstanding Barrier and Mechanical Properties

  • Guidotti, G.
  • Soccio, M.
  • García-Gutiérrez, Mari Cruz
  • Gutiérrez-Fernández, Edgar
  • Ezquerra, Tiberio A.
  • Siracusa, V.
  • Munari, A.
  • Lotti, N.
9 pags., 8 figs., 1 tab., 2 schs.-- sc9b04407_si_001.mp4 (75.48 MB) sc9b04407_si_002.mp4 (5.46 MB), Among the various factors that contribute to the transition from a linear to a circular economy, the identification of superpolymers with outstanding mechanical as well as barrier properties and zero environmental impact has become a mandatory issue. Such new supermaterials render recycling a concrete option for the efficient and ecofriendly management of plastic wastes. In this study, a 100% biobased polyester has been prepared by a one-pot and solvent-free synthesis, starting from 2,5-furandicarboxylic acid and 1,5-pentanediol. At first, a molecular and thermal characterization of the polymer has been conducted and then processed to prepare a compression molded film, despite its amorphous and rubbery nature at room temperature. The mechanical response was typical of elastomers, with a low elastic modulus and stress at break and high elongation at break. An instant shape recovery after breaking was observed, indicating the presence of net points. The barrier properties to O and CO were exceptional and similar to those of ethylene vinyl alcohol (EVOH) and of polymer liquid crystals. All of these unexpected and surprising properties were explained as being due to the presence of a 2D microstructure characterized by partially ordered furanic rings favored by intermolecular C-H···O bonds., Experiments at the ALBA Synchrotron have been funded by the Spanish Ministry of Science, Innovation and Universities (MSIU). This study was also partially supported by MSIU by the grant MAT2015-66443-C02-1-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Quantitative mechanical and electrical assessment by local probe methods of inkjet-printed PEDOT:PSS thin films

  • Gutiérrez-Fernández, Edgar
  • Gabaldón, I. A.
  • García-Gutiérrez, Mari Cruz
  • Varea, A.
  • Nogales, Aurora
  • Rebollar, Esther
  • Vila, A.
  • Cirera, T.
  • Ezquerra, Tiberio A.
APS March Meeting, Boston, MA, March 4-8, 2019. -- https://www.aps.org/meetings/meeting.cfm?name=MAR19, This work has been supported by Spanish MINECO under the projects MAT2014-59187-R, MAT2015-66443-C02-1-R and CTQ2016-75880-P.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Laser-Induced Periodic Surface Structuring of Poly(trimethylene terephthalate) Films Containing Tungsten Disulfide Nanotubes

  • Prada-Rodrigo, Javier
  • Rodríguez-Beltrán, René, I.
  • Paszkiewicz, S.
  • Szymczyk, A.
  • Ezquerra, Tiberio A.
  • Moreno, Pablo
  • Rebollar, Esther
© 2020 by the authors., We report the study of the formation of Laser Induced Periodic Surface Structures (LIPSS), with UV femtosecond laser pulses (λ = 265 nm), in free-standing films of both Poly(trimethylene terephthalate) (PTT) and the composite PTT/tungsten disulfide inorganic nanotubes (PTT-WS2). We characterized the range of fluences and number of pulses necessary to induce LIPSS formation and measured the topography of the samples by Atomic Force Microscopy, the change in surface energy and contact angle using the sessile drop technique, and the modification in both Young’s modulus and adhesion force values with Peak Force-Quantitative Nanomechanical Mapping. LIPSS appeared parallel to the laser polarization with a period close to its wavelength in a narrow fluence and number of pulses regime, with PTT-WS2 needing slightly larger fluence than raw PTT due to its higher crystallinity and heat diffusion. Little change was found in the total surface energy of the samples, but there was a radical increase in the negative polar component (γ−). Besides, we measured small variations in the samples Young’s modulus after LIPSS formation whereas adhesion is reduced by a factor of four. This reduction, as well as the increase in γ−, is a result of the modification of the surface chemistry, in particular a slight oxidation, during irradiation., This work has been supported by the Spanish Ministry of Science and Innovation by the projects MAT2015-66443-C02-1-R (MINECO/FEDER, UE), CTQ2016-75880-P (AEI/FEDER, UE) and FIS2017-87970-R. J.P.-R and P.M. acknowledge support from Junta de Castilla y León (Project SA287P18). J.P.-R thanks the Spanish Ministry of Universities for the FPU grant with reference: FPU17/01859., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Laser nanostructuring of thin films of PEDOT:PSS on ITO: Morphology, molecular structure and electrical properties

  • Gutiérrez-Fernández, Edgar
  • Gabaldón, I. A.
  • Rodríguez-Rodríguez, Álvaro
  • Solano, Eduardo
  • García-Gutiérrez, Mari Cruz
  • Nogales, Aurora
  • Cirera, A.
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
7 pags., 7 figs., 1 tab., Nanostructuring is one promising alternative to modify the functionalities of conducting polymers aiming atapplications in technologies like organic solar cells, organicfield-effect transistors and organic light-emittingdiodes. Nowadays, there is an increasing interest in alternative ways of nanostructuring more economic, quickerand reproducible, avoiding the necessity of stringent environmental conditions like clean rooms, high vacuum orcomplex mask fabrication. Here we prove that Laser Induced Periodic Surface Structures (LIPSS) can be formedinfilms of Poly(3,4-ethylenedioxythiophene) complexed with Poly(styrenesulfonate) (PEDOT:PSS) prepared byspin-coating on planar Indium Tin Oxide. PEDOT:PSS has been irradiated with the 4th harmonic of a Nd:YAGlaser resulting in LIPSS parallel to the laser polarization with a period close to the laser wavelength. LIPSSmorphology has been characterized by Atomic Force Microscopy (AFM) and synchrotron Grazing IncidenceSmall Angle X-ray Scattering while thefilm structure was studied by Grazing-Incidence Wide-Angle X-rayScattering and Raman spectroscopy. To analyze the impact of laser treatment on the electrical properties ofPEDOT:PSS, conductive AFM was employed showing that LIPSS partially preserve the original electrical con-ductivity. These results can be of interest for achieving functional polymer nanostructures by a quick and re-producible approach with no need for clean room conditions., This work has been supported by Ministry of Economy and Competitiveness (MINECO, Spain), Spanish State Research Agency(AEI) and European Regional Development (FEDER) under the projects MAT2014-59187-R, MAT2015-66443-C02-1-R-MINECO/FEDER, UEand CTQ2016-75880-P-AEI/FEDER, UE. E.R. also thanks for the tenure of a Ramón y Cajal contract (No. RYC-2011-08069). GISAXS and GIWAXS experiments were performed at NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Self-assembly of block copolymers under non-isothermal annealing conditions as revealed by grazing-incidence small-angle X-ray scattering

  • Fernández-Regúlez, Marta
  • Solano, Eduardo
  • Evangelio, Laura
  • Gottlieb, S.
  • Pinto-Gómez, Christian
  • Rius, Gemma
  • Fraxedas, J.
  • Gutiérrez, Edgar
  • Nogales, Aurora
  • García-Gutiérrez, Mari Cruz
  • Ezquerra, Tiberio A.
  • Perez Murano, Francesc X.
An accurate knowledge of the parameters governing the kinetics of block copolymer self-assembly is crucial to model the time- and temperature-dependent evolution of pattern formation during annealing as well as to predict the most efficient conditions for the formation of defect-free patterns. Here, the self-assembly kinetics of a lamellar PS-b-PMMA block copolymer under both isothermal and non-isothermal annealing conditions are investigated by combining grazing-incidence small-angle X-ray scattering (GISAXS) experiments with a novel modelling methodology that accounts for the annealing history of the block copolymer film before it reaches the isothermal regime. Such a model allows conventional studies in isothermal annealing conditions to be extended to the more realistic case of non-isothermal annealing and prediction of the accuracy in the determination of the relevant parameters, namely the correlation length and the growth exponent, which define the kinetics of the self-assembly., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 665919, the Spanish Ministry of Economy and Competitiveness (MINECO) under contract Nos. MAT2015-68307-P, MAT2015-66443-C02-1-R, TEC2015-69864-R, RTI2018-102007-B-I00, PID209-107514GB-100, RYC-2016-21412 and the Generalitat de Catalunya under contract No. 2017 SGR 1187. The ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant No. SEV-2017-0706) (MINECO/FEDER, UE)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Confinement effects in one-dimensional nanoarrays of polymer semiconductors and their photovoltaic blends

  • Hernández, J.J.
  • Puente-Orench, I.
  • Ezquerra, T.A.
  • Gutiérrez-Fernández, E.
  • García-Gutiérrez, M.C.
We report on the strong changes induced, by confinement, in the microstructure of the semiconductor poly(2, 5-bis(3-hexadecylthiophen-2-yl)thieno[3, 2-b]thiophene) (PBTTT) and its photovoltaic blend with [6, 6]-Phenyl-C71-butyric acid methyl ester (PC71BM). These organic compounds can be used as model systems to illustrate how sensitive this class of materials can be to spatial confinement on device-relevant length scales. The spatial confinement of nanofilaments as a function of diameter, from 180 to 25 nm, has been investigated by X-ray scattering with nanofocused synchrotron beams. The effects of spatial confinement are evident by crystallization in different crystal forms, reduction of crystallinity, phase segregation and anisotropic crystal orientation. It is also shown that confinement is an efficient tool to direct the overall texture included the crystal orientation of the homopolymer PBTTT and the PBTTT/PC71BM blend in a controlled manner.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Self-assembly of block copolymers under nonisothermal annealing conditions as revealed by grazing-incidence small-angle X-ray scattering

  • Fernández Regúlez, Marta
  • Solano, Eduardo|||0000-0002-2348-2271
  • Evangelio Araujo, Laura
  • Gottlieb, Steven|||0000-0003-1642-8602
  • Pinto-Gómez, Christian
  • Rius, Gemma|||0000-0003-0552-1043
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Gutiérrez-Fernández, Edgar
  • Nogales, Aurora|||0000-0002-2494-3551
  • García-Gutiérrez, Mari Cruz|||0000-0002-3604-1512
  • Ezquerra, Tiberio A.
  • Pérez Murano, Francesc|||0000-0002-4647-8558
An accurate knowledge of the parameters governing the kinetics of block copolymer self-assembly is crucial to model the time- and temperature-dependent evolution of pattern formation during annealing as well as to predict the most efficient conditions for the formation of defect-free patterns. Here, the self-assembly kinetics of a lamellar PS-b-PMMA block copolymer under both isothermal and non-isothermal annealing conditions are investigated by combining grazing-incidence small-angle X-ray scattering (GISAXS) experiments with a novel modelling methodology that accounts for the annealing history of the block copolymer film before it reaches the isothermal regime. Such a model allows conventional studies in isothermal annealing conditions to be extended to the more realistic case of non-isothermal annealing and prediction of the accuracy in the determination of the relevant parameters, namely the correlation length and the growth exponent, which define the kinetics of the self-assembly.