Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Impact of the in situ rise in hydrogen partial pressure on graphene shape evolution during CVD growth of graphene

  • Gebeyehu, Zewdu M.
  • Arrighi, Aloïs
  • Costache, Marius V.
  • Sotomayor Torres, C. M.
  • Esplandiú, María J.
  • Valenzuela, Sergio O.
Exposing graphene to a hydrogen post-etching process yields dendritic graphene shapes. Here, we demonstrate that similar dendritic structures can be achieved at long growth times without adding hydrogen externally. These shapes are not a result of a surface diffusion controlled growth but of the competing backward reaction (etching), which dominates the growth dynamics at long times due to an in situ rise in the hydrogen partial pressure. We have performed a systematic study on the growth of graphene as a function of time to identify the onset and gradual evolution of graphene shapes caused by etching and then demonstrated that the etching can be stopped by reducing the flow of hydrogen from the feed. In addition, we have found that the etching rate due to the in situ rise in hydrogen is strongly dependent on the confinement (geometrical confinement) of copper foil. Highly etched graphene with dendritic shapes was observed in unconfined copper foil regions while no etching was found in graphene grown in a confined reaction region. This highlights the effect of the dynamic reactant distribution in activating the in situ etching process during growth, which needs to be counteracted or controlled for large scale growth., This research was partially supported by the Spanish Ministry of Economy and Competitiveness, MINECO (under Contracts No. MAT2013-46785-P, No. MAT2016-75952-R, No. MAT2015-68307- P and Severo Ochoa No. SEV-2013-0295), by the European Research Council under Grant Agreement No. 306652 SPINBOUND, by the European Union's Horizon 2020 research and innovation programme under grant agreement No. 696656, and by the CERCA Programme and the Secretariat for Universities and Research, Knowledge Department of the Generalitat de Catalunya 2014 SGR 56. ZMG acknowledges support from MINECO FPI fellowship under Contract No. BES-2014-069925., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unraveling the operational mechanisms of chemically propelled motors with micropumps

  • Esplandiú, María J.
  • Zhang, Kuan
  • Fraxedas, J.
  • Sepúlveda, Borja
  • Reguera, David
The development of effective autonomous micro- and nanomotors relies on controlling fluid motion at interfaces. One of the main challenges in the engineering of such artificial machines is the quest for efficient mechanisms to power them without using external driving forces. In the past decade, there has been an important increase of man-made micro- and nanomotors fueled by self-generated physicochemical gradients. Impressive proofs of concept of multitasking machines have been reported demonstrating their capabilities for a plethora of applications. While the progress toward applications is promising, there are still open questions on fundamental physicochemical aspects behind the mechanical actuation, which require more experimental and theoretical efforts. These efforts are not merely academic but will open the door for an efficient and practical implementation of such promising devices. In this Account, we focus on chemically driven motors whose motion is the result of a complex interplay of chemical reactions and (electro)hydrodynamic phenomena. A reliable study of these processes is rather difficult with mobile objects like swimming motors. However, pumps, which are the immobilized motor counterparts, emerge as simple manufacturing and well-defined platforms for a better experimental probing of the mechanisms and key parameters controlling the actuation. Here we review some recent studies using a new methodology that has turned out to be very helpful to characterize micropump chemomechanics. The aim was to identify the redox role of the motor components, to map the chemical reaction, and to quantify the relevant electrokinetic parameters (e.g., electric field and fluid flow). This was achieved by monitoring the velocity of differently charged tracers and by fluorescence imaging of the chemical species involved in the chemical reaction, for example, proton gradients. We applied these techniques to different systems of interest. First, we probed bimetallic pumps as counterparts of the pioneering bimetallic swimmers. We corroborated that fluid motion was due to a self-generated electro-osmotic mechanism driven by the redox decomposition of H2O2. In addition, we analyzed by simulations the key parameters that yield an optimized operation. Moreover, we accomplished a better assessment of the importance of surface chemistry on the metal electrochemical response, highlighting its relevance in controlling the redox role of the metals and motion direction. Second, we focused on metallic and semiconductor micropumps to analyze light-controlled motion mechanisms through photoelectrochemical decomposition of fuels. These pumps were driven by visible light and could operate using just water as fuel. In these systems, we found a very interesting competition between two different mechanisms for fluid propulsion, namely, light-activated electro-osmosis and light-insensitive diffusio-osmosis, stemming from different chemical pathways in the fuel decomposition. In this case, surface roughness becomes a pivotal parameter to enhance or depress one mechanism over the other. These examples demonstrate that pumps are practical platforms to explore operating mechanisms and to quantify their performance. Additionally, they are suitable systems to test novel fuels or motor materials. This knowledge is extensible to swimmers providing not only fundamental understanding of their locomotion mechanisms but also useful clues for their design and optimization., This research was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under Contract Nos. MAT2015-68307-P, FIS2015-67837, and M-ERA.NET Project PCIN2016-093. The ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa program of MINECO (Grant SEV-2013-0295)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spin communication over 30 µm long channels of chemical vapor deposited graphene on SiO2

  • Gebeyehu, Zewdu M.
  • Parui, S.
  • Sierra, Juan F.
  • Timmermans, Matias
  • Esplandiú, María J.
  • Brems, S.
  • Huyghebaert, C.
  • Garello, Kevin
  • Costache, Marius V.
  • Valenzuela, Sergio O.
We demonstrate a high-yield fabrication of non-local spin valve devices with room-temperature spin lifetimes of up to 3 ns and spin relaxation lengths as long as 9 µm in platinum-based chemical vapor deposition (Pt-CVD) synthesized single-layer graphene on SiO2/Si substrates. The spin-lifetime systematically presents a marked minimum at the charge neutrality point, as typically observed in pristine exfoliated graphene. However, by studying the carrier density dependence beyond n ~ 5  ×  1012 cm−2, via electrostatic gating, it is found that the spin lifetime reaches a maximum and then starts decreasing, a behavior that is reminiscent of that predicted when the spin-relaxation is driven by spin–orbit interaction. The spin lifetimes and relaxation lengths compare well with state-of-the-art results using exfoliated graphene on SiO2/Si, being a factor two-to-three larger than the best values reported at room temperature using the same substrate. As a result, the spin signal can be readily measured across 30 µm long graphene channels. These observations indicate that Pt-CVD graphene is a promising material for large-scale spin-based logic-in-memory applications., This research was partially supported by the European Union’s Horizon 2020 research and innovation programme, Graphene Flagship CORE 2, under grant agreement No. 785219, by the Spanish Ministry of Economy and Competitiveness, MINECO (under Contracts No. MAT2013-46785-P, No. MAT2016-75952-R, No. MAT2015-68307-P and Severo Ochoa No. SEV- 2017-0706), and by the CERCA Programme and the Secretariat for Universities and Research, Knowledge Department of the Generalitat de Catalunya, 2017 SGR 827. ZMG acknowledges support from MINECO FPI fellowship under Contract No. BES-2014-069925 and MT from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodoswa-Curie grant agreement Nº 665919., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Water-mediated photo-induced reduction ofplatinum films

  • Fraxedas, J.
  • Zhang, Kuan
  • Sepúlveda, Borja
  • Esplandiú, María J.
  • Garcia, Xènia
  • Llorca, Jordi
  • Pérez-Dieste, Virginia
  • Escudero, Carlos
Platinum thin films activated ex situ by oxygen plasma become reduced by the combined effect of an intense soft X-ray photon beam and condensed water. The evolution of the electronic structure of the surface has been characterized by near-ambient-pressure photoemission and mimics the inverse two-step sequence observed in the electro-oxidation of platinum, i.e. the surface-oxidized platinum species are reduced first and then the adsorbed species desorb in a second step leading to a surface dominated by metallic platinum. The comparison with measurements performed under high-vacuum conditions suggests that the reduction process is mainly induced by the reactive species generated by the radiolysis of water. When the photon flux is decreased, then the reduction process becomes slower., The following funding is acknowledged: Ministerio de Economia y Competitividad (grant No. MAT2015-68307-P; grantNo. PCIN-2016-093); Generalitat de Catalunya (grant No.2017 SGR 128). The ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 is supported by theSevero Ochoa program of MINECO (grant SEV-2013-0295)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Self-assembly of block copolymers under non-isothermal annealing conditions as revealed by grazing-incidence small-angle X-ray scattering

  • Fernández-Regúlez, Marta
  • Solano, Eduardo
  • Evangelio, Laura
  • Gottlieb, S.
  • Pinto-Gómez, Christian
  • Rius, Gemma
  • Fraxedas, J.
  • Gutiérrez, Edgar
  • Nogales, Aurora
  • García-Gutiérrez, Mari Cruz
  • Ezquerra, Tiberio A.
  • Perez Murano, Francesc X.
An accurate knowledge of the parameters governing the kinetics of block copolymer self-assembly is crucial to model the time- and temperature-dependent evolution of pattern formation during annealing as well as to predict the most efficient conditions for the formation of defect-free patterns. Here, the self-assembly kinetics of a lamellar PS-b-PMMA block copolymer under both isothermal and non-isothermal annealing conditions are investigated by combining grazing-incidence small-angle X-ray scattering (GISAXS) experiments with a novel modelling methodology that accounts for the annealing history of the block copolymer film before it reaches the isothermal regime. Such a model allows conventional studies in isothermal annealing conditions to be extended to the more realistic case of non-isothermal annealing and prediction of the accuracy in the determination of the relevant parameters, namely the correlation length and the growth exponent, which define the kinetics of the self-assembly., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 665919, the Spanish Ministry of Economy and Competitiveness (MINECO) under contract Nos. MAT2015-68307-P, MAT2015-66443-C02-1-R, TEC2015-69864-R, RTI2018-102007-B-I00, PID209-107514GB-100, RYC-2016-21412 and the Generalitat de Catalunya under contract No. 2017 SGR 1187. The ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant No. SEV-2017-0706) (MINECO/FEDER, UE)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Impact of the in situ rise in hydrogen partial pressure on graphene shape evolution during CVD growth of graphene

  • Gebeyehu, Zewdu M.|||0000-0001-6451-6100
  • Costache, Marius Vasile|||0000-0001-7432-6175
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Valenzuela, Sergio O.|||0000-0002-4632-8891
  • Arrighi, Aloïs|||0000-0002-9774-852X
Growth to etching transformation following in situ rise in hydrogen with time results in dendritic graphene. Exposing graphene to a hydrogen post-etching process yields dendritic graphene shapes. Here, we demonstrate that similar dendritic structures can be achieved at long growth times without adding hydrogen externally. These shapes are not a result of a surface diffusion controlled growth but of the competing backward reaction (etching), which dominates the growth dynamics at long times due to an in situ rise in the hydrogen partial pressure. We have performed a systematic study on the growth of graphene as a function of time to identify the onset and gradual evolution of graphene shapes caused by etching and then demonstrated that the etching can be stopped by reducing the flow of hydrogen from the feed. In addition, we have found that the etching rate due to the in situ rise in hydrogen is strongly dependent on the confinement (geometrical confinement) of copper foil. Highly etched graphene with dendritic shapes was observed in unconfined copper foil regions while no etching was found in graphene grown in a confined reaction region. This highlights the effect of the dynamic reactant distribution in activating the in situ etching process during growth, which needs to be counteracted or controlled for large scale growth.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Unraveling the Operational Mechanisms of Chemically Propelled Motors with Micropumps

  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Zhang, Kuan
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Reguera, David|||0000-0001-6395-6112
The development of effective autonomous micro- and nanomotors relies on controlling fluid motion at interfaces. One of the main challenges in the engineering of such artificial machines is the quest for efficient mechanisms to power them without using external driving forces. In the past decade, there has been an important increase of man-made micro- and nanomotors fueled by self-generated physicochemical gradients. Impressive proofs of concept of multitasking machines have been reported demonstrating their capabilities for a plethora of applications. While the progress toward applications is promising, there are still open questions on fundamental physicochemical aspects behind the mechanical actuation, which require more experimental and theoretical efforts. These efforts are not merely academic but will open the door for an efficient and practical implementation of such promising devices.In this Account, we focus on chemically driven motors whose motion is the result of a complex interplay of chemical reactions and (electro)hydrodynamic phenomena. A reliable study of these processes is rather difficult with mobile objects like swimming motors. However, pumps, which are the immobilized motor counterparts, emerge as simple manufacturing and well-defined platforms for a better experimental probing of the mechanisms and key parameters controlling the actuation.Here we review some recent studies using a new methodology that has turned out to be very helpful to characterize micropump chemomechanics. The aim was to identify the redox role of the motor components, to map the chemical reaction, and to quantify the relevant electrokinetic parameters (e.g., electric field and fluid flow). This was achieved by monitoring the velocity of differently charged tracers and by fluorescence imaging of the chemical species involved in the chemical reaction, for example, proton gradients. We applied these techniques to different systems of interest. First, we probed bimetallic pumps as counterparts of the pioneering bimetallic swimmers. We corroborated that fluid motion was due to a self-generated electro-osmotic mechanism driven by the redox decomposition of HO. In addition, we analyzed by simulations the key parameters that yield an optimized operation. Moreover, we accomplished a better assessment of the importance of surface chemistry on the metal electrochemical response, highlighting its relevance in controlling the redox role of the metals and motion direction.Second, we focused on metallic and semiconductor micropumps to analyze light-controlled motion mechanisms through photoelectrochemical decomposition of fuels. These pumps were driven by visible light and could operate using just water as fuel. In these systems, we found a very interesting competition between two different mechanisms for fluid propulsion, namely, light-activated electro-osmosis and light-insensitive diffusio-osmosis, stemming from different chemical pathways in the fuel decomposition. In this case, surface roughness becomes a pivotal parameter to enhance or depress one mechanism over the other.These examples demonstrate that pumps are practical platforms to explore operating mechanisms and to quantify their performance. Additionally, they are suitable systems to test novel fuels or motor materials. This knowledge is extensible to swimmers providing not only fundamental understanding of their locomotion mechanisms but also useful clues for their design and optimization.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Photochemically Activated Motors, From Electrokinetic to Diffusion Motion Control

  • Zhang, Kuan
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
Self-propelled micro/nanomotors that can transform chemical energy from the surrounding environment into mechanical motion are cutting edge nanotechnologies with potential applications in biomedicine and environmental remediation. These applications require full understanding of the propulsion mechanisms to improve the performance and controllability of the motors. In this work, we demonstrate that there are two competing chemomechanical mechanisms at semiconductor/metal (Si/Pt) micromotors in a pump configuration under visible light exposure. The first propulsion mechanism is driven by an electro-osmotic process stemmed from a photoactivation reaction mediated by HO, which takes place in two separated redox reactions at the Si and Pt interfaces. One reaction involves the oxidation of HO at the silicon side, and the other the HO reduction at the metal side. The second mechanism is not light responsive and is triggered by the redox decomposition of HO exclusively at the Pt surface. We show that it is possible to enhance/suppress one mechanism over the other by tuning the surface roughness of the micromotor metal. More specifically, the actuation mechanism can be switched from light-controlled electrokinetics to light-insensitive diffusio-osmosis by only increasing the metal surface roughness. The different actuation mechanisms yield strikingly different fluid flow velocities, electric fields, and light sensitivities. Consequently, these findings are very relevant and can have a remarkable impact on the design and optimization of photoactivated catalytic devices and, in general, on bimetallic or insulating-metallic motors.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Electrophoretic origin of long-range repulsion of colloids near water/Nafion interfaces

  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Reguera, David|||0000-0001-6395-6112
  • Fraxedas, Jordi|||0000-0002-2821-4831
One of the most striking properties of Nafion is the formation of a long-range solute exclusion zone (EZ) in contact with water. The mechanism of formation of this EZ has been the subject of a controversial and long-standing debate. Previous studies by Schurr et al. and Florea et al. root the explanation of this phenomenon in the ion-exchange properties of Nafion, which generates ion diffusion and ion gradients that drive the repulsion of solutes by diffusiophoresis. Here we have evaluated separately the electrophoretic and chemiphoretic contributions to multi-ionic diffusiophoresis using differently charged colloidal tracers as solutes to identify better their contribution in the EZ formation. Our experimental results, which are also supported by numerical simulations, show that the electric field, built up due to the unequal diffusion coefficients of the exchanged ions, is the dominant parameter behind such interfacial phenomenon in the presence of alkali metal chlorides. The EZ formation depends on the interplay of the electric field with the zeta potential of the solute and can be additionally modulated by changing ion diffusion coefficients or adding salts. As a consequence, we show that not all solutes can be expelled from the Nafion interface and hence the EZ is not always formed. This study thus provides a more detailed description of the origin and dynamics of this phenomenon and opens the door to the rational use of this active interface for many potential applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Water-mediated photo-induced reduction of platinum films

  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Zhang, Kuan
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Garcia, Xènia|||0000-0003-0795-4168
  • Llorca, Jordi|||0000-0002-7447-9582
  • Pérez-Dieste, Virginia
  • Escudero, Carlos|||0000-0001-8716-9391
Platinum thin films activated ex situ by oxygen plasma become reduced by the combined effect of an intense soft X-ray photon beam and condensed water. The evolution of the electronic structure of the surface has been characterized by near-ambient-pressure photoemission and mimics the inverse two-step sequence observed in the electro-oxidation of platinum, i.e. the surface-oxidized platinum species are reduced first and then the adsorbed species desorb in a second step leading to a surface dominated by metallic platinum. The comparison with measurements performed under high-vacuum conditions suggests that the reduction process is mainly induced by the reactive species generated by the radiolysis of water. When the photon flux is decreased, then the reduction process becomes slower.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Self-assembly of block copolymers under nonisothermal annealing conditions as revealed by grazing-incidence small-angle X-ray scattering

  • Fernández Regúlez, Marta
  • Solano, Eduardo|||0000-0002-2348-2271
  • Evangelio Araujo, Laura
  • Gottlieb, Steven|||0000-0003-1642-8602
  • Pinto-Gómez, Christian
  • Rius, Gemma|||0000-0003-0552-1043
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Gutiérrez-Fernández, Edgar
  • Nogales, Aurora|||0000-0002-2494-3551
  • García-Gutiérrez, Mari Cruz|||0000-0002-3604-1512
  • Ezquerra, Tiberio A.
  • Pérez Murano, Francesc|||0000-0002-4647-8558
An accurate knowledge of the parameters governing the kinetics of block copolymer self-assembly is crucial to model the time- and temperature-dependent evolution of pattern formation during annealing as well as to predict the most efficient conditions for the formation of defect-free patterns. Here, the self-assembly kinetics of a lamellar PS-b-PMMA block copolymer under both isothermal and non-isothermal annealing conditions are investigated by combining grazing-incidence small-angle X-ray scattering (GISAXS) experiments with a novel modelling methodology that accounts for the annealing history of the block copolymer film before it reaches the isothermal regime. Such a model allows conventional studies in isothermal annealing conditions to be extended to the more realistic case of non-isothermal annealing and prediction of the accuracy in the determination of the relevant parameters, namely the correlation length and the growth exponent, which define the kinetics of the self-assembly.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Spin communication over 30 μm long channels of chemical vapor deposited graphene on SiO2

  • Gebeyehu, Zewdu M.|||0000-0001-6451-6100
  • Parui, S.
  • Sierra, Juan F.|||0000-0002-5438-0534
  • Timmermans, Matias|||0000-0003-4151-9960
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Brems, S.
  • Huyghebaert, Cedric
  • Garello, Kevin|||0000-0003-0236-322X
  • Costache, Marius Vasile|||0000-0001-7432-6175
  • Valenzuela, Sergio O.|||0000-0002-4632-8891
We demonstrate a high-yield fabrication of non-local spin valve devices with room-temperature spin lifetimes of up to 3 ns and spin relaxation lengths as long as 9 μm in platinum-based chemical vapor deposition (Pt-CVD) synthesized single-layer graphene on SiO/Si substrates. The spin-lifetime systematically presents a marked minimum at the charge neutrality point, as typically observed in pristine exfoliated graphene. However, by studying the carrier density dependence beyond n ∼ 5 × 10 cm, via electrostatic gating, it is found that the spin lifetime reaches a maximum and then starts decreasing, a behavior that is reminiscent of that predicted when the spin-relaxation is driven by spin-orbit interaction. The spin lifetimes and relaxation lengths compare well with state-of-the-art results using exfoliated graphene on SiO/Si, being a factor two-to-three larger than the best values reported at room temperature using the same substrate. As a result, the spin signal can be readily measured across 30 μm long graphene channels. These observations indicate that Pt-CVD graphene is a promising material for large-scale spin-based logic-in-memory applications.