Skip to main content

MATERIALES Y MODULOS TERMOELECTRICOS PARA APLICACIONES A ALTAS TEMPERATURAS

MAT2017-82183-C3-1-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 68
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of Na-substitution on magnetoresistance and flux pinning energy of Bi-2212 ceramics prepared via hot-forging process

  • Özçelik, Bekir
  • Gürsul, Mehmet
  • Karaçora Nane, F.
  • Madre, M. A.
  • Sotelo, Andres
In this study, polymerization method with polyethyleneimine, followed by hot-forging process was used to synthesize bulk textured Bi2Sr2Ca1−xNaxCu2Oy (x = 0.0, 0.05, 0.075 0.1, and 0.15) ceramics. Magnetoresistance performance of samples was studied by change of flux pinning mechanism. The effect of Na-substitution on the magnetoresistance, flux pinning energy, irreversibility field, upper critical magnetic field and coherence length was evaluated in the framework of thermally activated flux flow model. A resistivity transition broadening under various magnetic fields (0–5 T) was analyzed. By using the resistivity data, the upper critical field and the coherence length at T = 0 K were deduced. For H⊥c , HC2(0) and ξ(0) values were calculated as 31, 31.3, 36.7, 38.3, 35.1 T and 33.1, 32.4, 30.0, 29.3, 30.6 Å, for 0.0, 0.05, 0.075, 0.10, and 0.15 Na-doped samples, respectively. For H ||c, HC2(0) and ξ(0) values were 95 and 112.3 T and 18.6 and 17.1 Å, for the samples of Na0 and Na2, respectively. In particular, the flux pinning or activation energies of Bi2Sr2Ca1−xNaxCu2O8+y where x = 0.10 were determined to be 0.19 eV for 0 T and 0.06 eV for 5 T., This work is supported by the Research Fund of Çukurova University, Adana, Turkey, under Grant Contracts No. FBA-2014-3500. M.A. Madre, and A. Sotelo wish to thank the Gobierno de Aragón-FEDER (Research Group T 54-17 R), and the Spanish MINECO-FEDER (MAT2017-82183-C3-1-R) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of simultaneous K, and Yb substitution for Ca on the microstructural and thermoelectric characteristics of CaMnO3 ceramics

  • Sotelo, Andres
  • Depriester, M.
  • Torres, M. A.
  • Sahraoui, A. H.
  • Madre, M. A.
  • Diez, J. C.
CaMnO3-based materials are very attractive among n-type thermoelectric oxides for high-temperature applications when they are appropriately doped. The main drawback of these materials is the cost associated to the necessary rare earth cations. This work aims decreasing the amount of these materials through a partial substitution of Ca2+ by an equimolar mixture of K+ and Yb3+, Ca1-x(K0.5Yb0.5)xMnO3, with x = 0.05, 0.10, 0.15, and 0.20. XRD studies have confirmed that the thermoelectric phase is the major one in all samples. Microstructure has shown the formation of large crystals, and an increasing porosity when the substitution is raised. This evolution has been confirmed through density measurements. Electrical resistivity has been drastically decreased for the 0.10 substituted samples, compared with the 0.05 ones, slightly increasing for higher substitution. On the other hand, absolute Seebeck coefficient and thermal conductivity are lower when the substitution is raised. The best ZT values have been achieved for the 0.10 substituted samples, which are around the typical reported in the literature for higher doping level. These results clearly point out to a decrease of the necessary rare earth dopant content to achieve similar performances in CaMnO3 ceramics, which is of the main economic significance for their industrial production., The authors wish to thank the Gobierno de Aragón-FEDER (Grupos de Investigacion Consolidados T12 and T87), MINECO-FEDER (MAT2017-82183-C3-1-R), and Universidad de Zaragoza (UZ2017-TEC-03) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of Ag on the properties of Ca0.9Yb0.1MnO3 sintered ceramics

  • Sotelo, Andres
  • Torres, M. A.
  • Madre, M. A.
  • Diez, J. C.
This article belongs to the Special Issue Recent Advances in Thermoelectric Materials., In this study, Ca0.9Yb0.1MnO3 + x wt.% Ag (with x = 0, 1, 3, 5, and 10) thermoelectric materials were prepared via the classical ceramic method. In spite of the very high sintering temperature (1300 °C), no significant Ag losses were observed following this process. Moreover, Ag addition enhanced cation mobility during sintering due to the formation of a liquid phase. Microstructurally, it was found that Ag decreases porosity; this was confirmed by density measurements. Ag was also found to promote the formation of a Ca2Mn2O5 secondary phase. Despite the presence of this secondary phase, samples with Ag displayed lower electrical resistivity than Ag-free ones, without a drastic decrease in the absolute Seebeck coefficient. The highest thermoelectric performances, which were determined by power factor, were obtained in 1 wt.% Ag samples. These maximum values are slightly higher than the best of those reported in the literature for sintered materials with similar compositions, with the additional advantage of their being obtained using a much shorter sintering procedure., This research was funded by MINECO-FEDER grant number MAT2017-82183-C3-1-R, and Gobierno de Aragón-FEDER grant number T 54-17R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of alkaline earth dopant on density, mechanical, and electrical properties of Cu0.97AE0.03CrO2 (AE = Mg, Ca, Sr, and Ba) delafossite oxide

  • Madre, M. A.
  • Torres, M. A.
  • Gómez, J. A.
  • Diez, J. C.
  • Sotelo, Andres
CuCrO2 and Cu0.97AE0.03CrO2 (AE = Mg, Ca, Sr, and Ba) polycrystalline materials have been prepared through the classical solid state route. CuCrO2 is the major phase in all cases, with larger grain sizes when the alkaline earth dopant is larger. Doping also promotes the formation of secondary phases, which appear in the grain boundaries in the Ca, Sr, and Ba doped samples. Density has been drastically improved through doping, reflected in lower electrical resistivities and higher mechanical properties than the measured in undoped samples. In spite of a relatively high decrease of Seebeck coefficient, all doped samples reached higher power factor values than the undoped ones in the whole measured temperature range. The highest power factor has been reached in Mg doped samples, 0.32 mW/K2 m at 800 °C, which is among the highest obtained so far in randomly oriented polycrystalline CuCrO2 materials., The authors wish to thank the Gobierno de Aragón-FEDER (Grupos de Investigacion Consolidados T12 and T87), MINECO-FEDER (MAT2017-82183-C3-1-R), and Universidad de Zaragoza (UZ2017-TEC-03) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of substrate on the microstructure and thermoelectric performances of Sr-doped Ca3Co4O9 thick films

  • Torres, M. A.
  • Mora Alfonso, Mario
  • Amaveda, H.
  • Madre, M. A.
  • Sotelo, Andres
Ca3Co4O9 thermoelectric materials in form of thick films are very promising in practical applications due to their low costs and relatively high performance. In this work, two different suspensions have been used to produce different coatings on Al2O3 polycrystalline substrates with theoretical green thickness of 360 and 2000 µm. Moreover, the effect of substrate has also been investigated using Al2O3 monocrystalline substrates and a 360 µm green thickness. Sintering procedure at 900 °C for 24 h has drastically decreased coating thickness. XRD performed on the coatings surface has shown the formation of small amounts of Ca3Co2O6 secondary phase on the polycrystalline substrates, while it was more abundant, and accompanied by Ca2Co2O5 on the monocrystalline substrates. In spite of the higher secondary phases content, monocrystalline substrates produced a slight grain orientation which led to the highest thermoelectric properties between the samples (0.38 mW/K2m at 800 °C), and very close to the best reported values in the literature., The authors wish to thank the Gobierno de Aragón-FEDER (Research Group T54-17R), and the Spanish MINECO-FEDER (Project MAT2017-82183-C3-1-R) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fast preparation route to high-performances textured Sr-doped Ca3Co4O9 thermoelectric materials through precursor powder modification

  • Torres, M. A.
  • Garcia, Gustavo
  • Urrutibeascoa, Idoia
  • Madre, M. A.
  • Diez, J. C.
  • Sotelo, Andres
This work presents a short and very efficient method to produce high performance textured Ca3Co4O9 thermoelectric materials through initial powders modification. Microstructure has shown good grain orientation, and low porosity while slightly lower grain sizes were obtained in samples prepared from attrition milled powders. All samples show the high density of around 96% of the theoretical value. These similar characteristics are reflected in, approximately, the same electrical resistivity and Seebeck coefficient values for both types of samples. However, in spite of similar power factor (PF) at low temperatures, it is slightly higher at high temperature for the attrition milled samples. On the other hand, the processing time reduction (from 38 to 2 h) when using attrition milled precursors, leads to lower mechanical properties in these samples. All these data clearly point out to the similar characteristics of both kinds of samples, with a drastic processing time decrease when using attrition milled precursors, which is of the main economic importance when considering their industrial production., The authors thank the Gobierno de Aragón- FEDER (Research Group T 54–17 R), the Spanish MINECO-FEDER (MAT2017-82183-C3-1-R), and Basque Government Industry Department through the Elkartek program (Exp: KK-2017/00099-HiTOM) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-temperature stability of hot-pressed Sr-doped Ca3Co4O9

  • Madre, M. A.
  • Urrutibeascoa, Idoia
  • Garcia, Gustavo
  • Torres, M. A.
  • Sotelo, Andres
  • Diez, J. C.
Bulk textured Ca2.93Sr0.07Co4O9 samples have been prepared by hot uniaxial pressing followed by thermal treatment at 800°C under air for between 0 h and 1532 h. The microstructural, thermoelectric, and mechanical properties as well as density of all the samples were evaluated as a function of the duration of thermal treatment. Scanning electron microscopy characterization showed that the samples were mainly composed of Sr-doped Ca3Co4O9 thermoelectric (TE) phase, accompanied by minor amounts of Sr-free Ca3Co2O6 secondary phase. After an initial decrease of density after the first aging treatment, it remained practically constant for longer durations. This behavior is reflected in the mechanical properties, which slightly decreased after 12 h of thermal treatment, compared with the as-hot-pressed state, but remained practically constant after larger durations. However, the TE properties were not affected by the aging process, lying within typical errors independently of the aging duration. Moreover, the power factor values measured at 850°C (> 0.60 mW/K2 m) lie among the highest obtained so far for this kind of material., This research has been supported by the Spanish MINECO-FEDER (MAT2017-82183-C3-1-R), the Basque Government Industry Department through the Elkartek program (Exp: KK-2017/00099 - HiTOM), and the Gobierno de Aragón-FEDER (Research Group T 54-17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Improvement of thermoelectric properties of Ca0.9Gd0.1MnO3 by powder engineering through K2CO3 additions

  • Ferreira, Nuno M.
  • Ferro, M. C.
  • Sarabando, Artur R.
  • Ribeiro, A.
  • Davarpanah, A.
  • Amaral, Vitor S.
  • Madre, M. A.
  • Kovalevsky, A. V.
  • Torres, M. A.
  • Costa, F. M.
  • Sotelo, Andres
Oxide materials based on calcium manganite show clear prospects as thermoelectrics, provided by their stability at high temperatures and inherent flexibility in tuning the relevant electrical and thermal transport properties. Donor-doped CaMnO3 is an n-type semiconductor with a perovskite structure and relatively high thermoelectric performance. In this work, the precursor powders have been modified through potassium carbonate additions to produce Ca0.9Gd0.1MnO3 pellets without the usual delamination problems occurring during the compaction process. In order to demonstrate the relevant effects, several samples with different amounts of potassium carbonate (0–15 wt%) have been prepared. The results showed that potassium additions significantly facilitate the compaction procedure, while also improving the thermoelectric performances. The results also highlight the importance of porosity control for improving ZT, by decreasing the thermal conductivity without reduction of the electrical performance. The highest ZT values were observed for the samples processed at 15 wt% of potassium carbonate addition, exhibiting an improvement at least 30% at 800 °C when compared to the pure samples., N.M. Ferreira, A.V. Kovalevsky and FM Costa acknowledge the support of i3 N (UID/CTM/50025/2013) and CICECO-Aveiro Institute of Materials (UID/CTM/50011/2013), financed by FCT/MEC and FEDER under the PT2020 Partnership Agreement. The support from FCT (Portugal) grant SFRH/BPD/111460/2015, and the funding that allowed a scientific mission to Zaragoza to perform the present work, is also acknowledged. A. Sotelo, M. A. Madre, J. C. Diez, and M. A. Torres acknowledge the Gobierno de Aragon (Grupo de Investigacion T 54-17 R), and the MINECO-FEDER (MAT2017-82183-C3-1-R) for funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Significant enhancement of the thermoelectric performance in Ca3Co4O9 thermoelectric materials through combined strontium substitution and hot-pressing process

  • Torres, M. A.
  • Costa, F. M.
  • Flahaut, D.
  • Touati, K.
  • Rasekh, Sh.
  • Ferreira, Nuno M.
  • Allouche, J.
  • Depriester, M.
  • Kovalevsky, A. V.
  • Diez, J. C.
  • Sotelo, Andres
This work explores the possibilities for a further enhancement of the thermoelectric properties of Ca3Co4O9 by Sr-doping combined with hot-pressing. Modified hot-pressing process resulted in highly-textured and dense ceramics. Sr-doping significantly improves electrical properties, resulting in extremely large power factor (1.2 mW/K2m at 800 °C) due to simultaneous electrical resistivity decrease and Seebeck coefficient increase. The main effect on cumulative electrical performance is provided by the Seebeck coefficient, reaching 270μV/K at 800 °C. XPS revealed relatively high average cobalt oxidation state at room temperature (+3.3), compared to materials produced by conventional sintering. The results of combined XPS and Auger electron spectroscopy emphasize the importance of high densification in Ca3Co4O9-based ceramics for preventing phase decomposition and interaction with CO2 and moisture. Still, despite the exceptional electrical performance, the calculated figure-of-merit (estimated as 0.29 at 800 °C) is around the best reported in the literature due to a high thermal conductivity (4.4 W/K m at room temperature)., M. A. Torres, M. A. Madre, J. C. Diez, and A. Sotelo thank the Spanish MINECO-FEDER (MAT2017-82183-C3-1-R) and Gobierno de Aragón-FEDER (Research group T54-17R), for financial support. Authors acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. N.M. Ferreira, A.V. Kovalevsky and F.M. Costa acknowledge the i3N (UID/CTM/50025/2013), CICECO-Aveiro Institute of Materials (UID/CTM/50011/2013) and POCI-01-0145-FEDER-031875 project financed by COMPETE 2020 Program, FCT/MEC and FEDER, POCI in its FEDER/FNR component, under the PT2020 Partnership Agreement. The support from FCT (Portugal) grants SFRH/BPD/111460/2015 and IF/00302/2012, are also acknowledged. Sh. Rasekh acknowledges a FCT grant (SFRH/BPD/124238/2016)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of annealing and potassium substitution on the thermoelectric and magnetic properties of directionally grown Bi2Sr2Co2Oy ceramics, Efecto del recocido y el dopado con potasio en las propiedades termoeléctricas y magnéticas de las cerámicas Bi2Sr2Co2Oy crecidas direccionalmente

  • Çetin, Gize
  • Özçelik, Bekir
  • Gürsul, Mehmet
  • Torres, M. A.
  • Madre, M. A.
  • Sotelo, Andres
In Press., [EN]: Bi2Sr2−xKxCo2Oy (x = 0.0, 0.025, 0.050, 0.075, 0.100, 0.125, and 0.15) ceramic materials have been fabricated using a classical ceramic process, followed by texturing through directional solidification. SEM analysis of samples, before and after annealing has shown that grains were aligned along the growth direction. While as-grown samples have several phases, besides the thermoelectric one, the annealed ones show much higher thermoelectric phase content. In addition, K-substitution increases the thermoelectric phase content and enhances grain orientation. These improvements decrease the electrical resistivity without significant changes in Seebeck coefficient. The maximum power factor value for 0.10K-substituted annealed samples has been found as 0.20 mW/K2 m. This is superior to the highest reported for hot-pressed materials. However, all samples have similar magnetic properties., [ES]: Materiales cerámicos de composición Bi2Sr2−xKxCo2Oy (x = 0.0, 0.025, 0.050, 0.075, 0.100, 0.125, y 0.15) se han preparado por medio del proceso cerámico tradicional, seguido por un texturizado a través de una solidificación direccional. El análisis de las muestras por medio del SEM, antes y después del recocido, ha mostrado que los granos se han alineado en la dirección del crecimiento. Mientras que las muestras crecidas presentan varias fases, además de la termoeléctrica, las recocidas tienen mayor cantidad de fase termoeléctrica. Además, la substitución con potasio aumenta la proporción de fase termoeléctrica y mejora la orientación de los granos. Estas mejoras llevan a una disminución de la resistividad eléctrica sin modificar en gran medida el coeficiente de Seebeck. El mayor valor del factor de potencia se ha obtenido en muestras recocidas con substituciones del 0.10 K, 0.20 mW/K2 m. Este valor es mayor que el mayor reportado en materiales texturizados por prensado uniaxial en caliente. Sin embargo, la diferencia en el contenido de K, no produce variaciones en las propiedades magnéticas., This work is supported by Research Fund of Çukurova University, Adana, Turkey, under grant contracts no: FDK-2016-6105 and FBI-2017-9225. M.A. Madre, M.A. Torres, and A. Sotelo acknowledge the MINECO-FEDER (MAT2017-82183-C3-1-R), and Gobierno de Aragon-FEDER (Research Group T 54-17 R) for funding. The authors wish to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of cesium substitution on the superconducting properties of Bi-2212 samples prepared via solid-state reaction and laser floating zone technique

  • Ergin, İbrahim
  • Özçelik, Bekir
  • Madre, M. A.
  • Sotelo, Andres
In this work, the effect of cesium substitution on the structural and superconducting properties of Bi2Sr2Ca1-xCsxCu2O+y (where x = 0.0, 0.025, 0.050, 0.075, 0.10, 0.125, and 0.15) samples prepared by the solid-state reaction route and by directional growth using the laser floating zone (LFZ) technique has been studied. X-ray diffraction has shown that both kinds of samples present the 2212 phase as the major one, with pseudo tetragonal structure, accompanied by minor amounts of (Sr,Ca)CuO2 and Bi2(Sr,Ca)4O6 + d secondary phases. SEM-EDX results indicate that Bi-2212 phase is the major one, with small amounts of secondary phases. Cs substitution diminishes the size and content of secondary phases. Magnetization measurements reflect different behavior for sintered and LFZ grown samples. Although the diamagnetic transition is very wide for the former samples, it is very sharp for the last ones. The critical onset temperatures, TC, are around 80 and 90 K, for sintered and LFZ grown samples, respectively. Moreover, M–H measurements indicate that LFZ grown samples exhibit larger areas than the sintered ones. The intragranular critical current, JC, calculated from the M–H loops and Bean’s formula, is maximum for x = 0.025Cs sintered and x = 0.05Cs LFZ grown samples. The maximum pinning forces, FPmax, determined in these samples are higher than those obtained in undoped ones, reaching 9 × 107 Oe*A/cm2 and 10 × 108 Oe*A/cm2, at 10 K, for sintered and LFZ grown samples, respectively., This work is supported by Research Fund of Çukurova University, Adana, Turkey, under grant contract no. FYL-2018-9926. M. A. Madre and A. Sotelo recognize the MINECO-FEDER (MAT2017-82183-C3-1-R) and Gobierno de Aragon-FEDER (Research Group T 54-17 R) for funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of rubidium substitution on the physical and superconducting properties of textured high-Tc BSCCO samples

  • Özçelik, Bekir
  • Ergin, İbrahim
  • Madre, M. A.
  • Sotelo, Andres
In this research, the effects of rubidium (Rb) substitution on the microstructural, physical, and superconducting properties of Bi2Sr2Ca1-xRbxCu2O8 + y with x = 0.0, 0.025, 0.05, 0.075, 0.10, and 0.125 superconductor have, in detail, been studied. For this purpose, samples were prepared through the classical solid state reaction route, followed by directional grown using the laser floating zone technique and annealing. XRD measurements showed that all samples are composed of Bi-2212 phase as the dominant one, together with less amount of secondary phases. The crystal symmetries of samples were determined as pseudo tetragonal. SEM-EDX confirmed that Bi-2212 phase is the major one, with minor amounts of Bi2 + x(Sr,Ca)2O6 + d, (Sr,Ca)CuO2, CuO2, and CaO secondary phases. In magnetization versus temperature measurements, very sharp diamagnetic transition is observed. The critical onset temperatures, TC, for all samples are obtained around 90 K. From M-H measurement, it has been found that all samples have very large loop areas. By using the data from M-H measurements in the Bean model, the intragranular critical field, JC, has been determined. It has been found that the x = 0.05Rb sample shows the highest superconducting properties and the largest JC values (2.2 105 A/cm2 at 10 K). Moreover, the maximum pinning force, FPmax, at this temperature has also been obtained in x = 0.05Rb sample (8.5 108 Oe A/cm2)., M. A. Madre and A. Sotelo acknowledge the MINECO-FEDER (MAT2017-82183-C3-1-R) and Gobierno de Aragon-FEDER (Research Group T 54-17 R) for funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhancement of electrical conductivity of Ca2.93Sr0.07Co4O9 thick films via hot uniaxial pressing

  • Mora Alfonso, Mario
  • Amaveda, H.
  • Torres, M. A.
  • Madre, M. A.
  • Marinel, S.
  • Sotelo, Andres
Sr‐doped Ca3Co4O9 thermoelectric thick films have been prepared by dip‐coating technique, followed by sintering and hot uniaxial pressing. XRD patterns are very similar in both types of samples, with only differences in the relative intensity of peaks, pointing out to a better grain orientation in hot‐pressed films. Moreover, SEM observation showed a drastic decrease in the hot‐pressed films thickness. Electrical resistivity is decreased in textured materials due to the higher grain orientation and density, confirmed through Hall measurements. On the other hand, Seebeck coefficient is maintained practically unchanged. Power factor at 800°C is much higher in textured materials (0.44 mW/K2m) than determined in sintered films (0.30 mW/K2m), and in the order of the best typically reported in the literature (0.43 mW/K2m)., The authors thank the Gobierno de Aragón‐FEDER (Research Group T 54‐17R), and the Spanish MINECO‐FEDER (Project MAT2017‐82183‐C3‐1‐R) for financial support. The authors acknowledge the use of Servicio General de Apoyo a la Investigación‐SAI, Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Growth rate effects on the thermoelectric performance of CaMnO3-based ceramics

  • Ferreira, Nuno M.
  • Neves, N. R.
  • Ferro, M. C.
  • Torres, M. A.
  • Madre, M. A.
  • Costa, F. M.
  • Sotelo, Andres
  • Kovalevsky, A. V.
CaMnO3–based materials represent a promising family of n-type oxide thermoelectrics. The objective of the present work is assessing the impacts on relevant structural, microstructural and thermoelectric properties of manganites when they are processed by the laser floating zone technique. For this purpose, donor-doped Ca0.9La0.1MnO3, CaMn0.95Nb0.05O3 and undoped CaMnO3 were used. Different growth conditions have been evaluated through combined studies of structural, microstructural, and thermoelectric characteristics. Despite the presence of secondary phases, electrical resistivity is among the best reported in the literature (9 mΩ.cm at 800 °C for La-doped materials grown at 200 mm/h). Essentially high absolute Seebeck coefficient of 320 μV/K at 800 °C was observed for undoped samples grown at 10 mm/h. Power factor is significantly affected by the growth conditions, reaching the highest values when using the lowest pulling rates. Exceptionally high PF (0.39 mW/K2m at 800 °C) was obtained for undoped CaMnO3 samples grown at 10 mm/h., The authors are grateful to i3N (FCT UID/CTM/50025/2019), CICECO-Aveiro Institute of Materials (FCT UID/CTM/50011/2019) and project POCI-01-0145-FEDER-031875, financed by COMPETE 2020 Program and national funds through the FCT/MEC and FEDER under the PT2020 Partnership Agreement. NMF thanks FCT for the grant SFRH/BPD/111460/2015. AK acknowledges the support of the project of bilateral cooperation between FCT and DAAD (Germany). M. A. Madre, M. A. Torres, and A. Sotelo acknowledge Gobierno de Aragón-FEDER (Research Group T 54-17R), and MINECO-FEDER (Project MAT2017-82183-C3-1-R) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Improving thermoelectric properties of Ca3Co4O9+δ through both Na doping and K addition at optimal values

  • Özkurt, B.
  • Aytekin, M. Ersin
  • Madre, M. A.
  • Sotelo, Andres
  • Torres, M. A.
Ca2.93Na0.07Co4Oy/x wt% K2CO3 (x = 0.00, 0.01, and 0.03) polycrystalline ceramics were prepared by conventional solid-state method. XRD results have shown that all samples predominantly include Ca3Co4O9 phase together with small amounts of secondary phases. SEM images show that all samples have randomly oriented plate-like grains in different sizes. The electrical resistivity measurement showed that electrical properties of Ca3Co4O9 ceramics can be improved significantly by both, Na doping and K addition at their optimal values. The effect of dopants on thermoelectric properties of Ca3Co4O9 was examined by both, Seebeck coefficient and power factor, being higher in K-added than in the pure samples, indicating that thermoelectric properties of samples are positively affected when alkaline elements enter into their structure., B. Özkurt and M.E. Aytekin are supported by the BAP Research Fund of Mersin University, Mersin, Turkey, under Grand Contracts No. 2018-3-TP3-3086. M.A. Madre, M.A. Torres, and A. Sotelo acknowledge the Spanish MINECO-FEDER (MAT2017-82183-C3-1-R), and the Gobierno de Aragón-FEDER (Research Group T 54-17R) for funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Low temperature thermoelectric properties of K-substituted Bi2Sr2Co2Oy ceramics prepared via laser floating zone technique

  • Özçelik, Bekir
  • Çetin, Gize
  • Gürsul, Mehmet
  • Madre, M. A.
  • Sotelo, Andres
  • Adachi, S.
  • Takano, Y.
In the present study, Bi2Sr2-xKxCo2Oy (x = 0.0, 0.050, 0.075, 0.100, and 0.15) ceramic precursors have been produced using the classical ceramic route, followed by texturing through the laser floating zone technique. XRD results show that the thermoelectric phase is the major one in all cases. Moreover, K-substitution decreases the secondary phases content, when compared to the undoped sample. SEM observations indicate that grain orientation is significantly enhanced when K-content is increased. K-doping decreases electrical resistivity from 32 10−5 Ω m (in undoped samples) to 20–22 10−5 Ω m at 300 K, while increasing Seebeck coefficient from 55 μV/K to 100–117 μV/K at 300 K. On the other hand, thermal conductivity is slightly lower in undoped samples (0.93 W/K m, compared to 1.10–1.28 W/K m for doped ones at 300 K), due to their lower electrical conductivity. Finally, ZT values are higher when the K-content increases up to x = 0.10, reaching 0.029 at around 400 K, and slightly decreasing for higher doping levels., This work is supported by Research Fund of Çukurova University, Adana, Turkey, under grant contracts no: FDK-2016-6105 and FBI-2017-9225. M. A. Madre and A. Sotelo wish to thank the Gobierno de Aragón-FEDER (Research Group T 54-17 R), and the Spanish MINECO-FEDER (MAT2017-82183-C3-1-R) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A novel multilayer composite structured thermoelectric module with high output power

  • Wang, Xue
  • Wang, Hongchao
  • Su, Wenbin
  • Wang, Teng
  • Madre, M. A.
  • Zhai, Jinze
  • Chen, Tingting
  • Sotelo, Andres
  • Wang, Chunlei
Output power is a vital criterion for evaluating the heat–electricity conversion capability of thermoelectric power generators (TEGs). This study for the first time proposes a novel (Bi,Sb)2Te3-based multilayer composite structured thermoelectric module (MCTEM) that can achieve high power output. Parallel heat transfer and electrical parallel connection are simultaneously achieved in an n-type single-leg MCTEM which is composed of several alternately stacked thermoelectric slices and inner electrodes. The extremely low inner resistance (Rin) and high current (I) are 0.03 and 12.7 times those measured in a single-leg traditional module, respectively, and then a maximum output power (Pmax) of 5.8 mW is achieved at ΔT = 35 °C. The effect of the slice number on module performance has been investigated, and the optimal Pmax for n- and p-type single-leg MCTEMs has been achieved when using 3 slices. Based on the optimized single-leg MCTEMs mentioned above, a π-type MCTEM has been designed to improve the output voltage (V) and further enhance the Pmax. The π-type MCTEM achieves a high V of 3.1 mV while maintaining a low Rin of 0.94 mΩ and a large I value of 3.3 A, and then a Pmax of 10.5 W is obtained which is 4.2 times that of the traditional module at ΔT = 35 °C. This new design of a MCTEM provides enlightenment for fabrication and commercialization through the development of high-power TEGs., The work was financially supported by the National Key R&D Program of China of 2017YFE0195200, the National Basic Research Program of China of 2013CB632506, the Natural Science Fund of China under grant No. 51871134 and 51672159, the Science Fund of Shandong Province under grant No. ZR2019MEM007, the Young Scholars Program of Shandong University under grant No. 2015WLJH21, and the Foundation of the State Key Laboratory of Metastable Materials Science and Technology under grant No. 201703. M. A. Madre and A. Sotelo also appreciate Gobierno de Aragón-FEDER (Research Group T54-17R) and MINECO-FEDER (MAT2017-82183-C3-1-R) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Improvement of grain alignment in Bi2Sr2Co1.8Oy thermoelectric through the electrically assisted laser floating zone

  • Ferreira, Nuno M.
  • Madre, M. A.
  • Torres, M. A.
  • Davarpanah, A.
  • Amaral, Vitor S.
  • Costa, F. M.
  • Sotelo, Andres
Thermoelectric performances of cobaltite ceramics were improved by increasing grain sizes and alignment through the Electrically Assisted Laser Floating Zone method. Bi2Sr2Co1.8Oy ceramics were directionally grown at 30 mm/h, applying external DC (0-500 mA) during the growth process. Microstructure and thermoelectric properties are significantly influenced by the external current direction and intensity. Negative currents/pole on the seed rod prevent the formation of thermoelectric phase, while positive pole on the seed rod, decreases the amount of secondary phases and increase grain orientation when compared to samples grown without current. Annealing procedure decreases secondary phases content, without modifying grain alignment. The best thermoelectric performances were obtained for samples grown with +300 mA, reaching the highest ZT values of 0.09 at 650 °C. Moreover, it should be highlighted that these processed samples can be directly applied in thermoelectric modules, avoiding the long and expensive steps necessary when other preparation processes are used., Authors acknowledge the support of i3N (UIDB/50025/2020 & UIDP/50025/2020) and CICECO-Aveiro Institute of Materials (UID/CTM/50011/2020), financed by FCT/MEC and FEDER under the PT2020 Partnership Agreement. This work is funded by national funds (OE), through FCT – Fundação para a Ciência e a Tecnologia, I.P., in the scope of the framework contract foreseen in the numbers 4, 5 and 6 of the article 23, of the Decree-Law 57/2016, of August 29, changed by Law 57/2017, of July 19. A. Sotelo, M. A. Madre, and M. A. Torres acknowledge the MINECO-FEDER (MAT2017-82183-C3-1-R), and the Gobierno de Aragon (Grupo de Investigacion T 54-17 R)for funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Preparation, structural characteristics and optical parameters of the synthesized nano-crystalline sulphur-doped Bi2Te2.85Se0.15 thermoelectric materials

  • Shalaby, M. S.
  • Hashem, H. M.
  • Yousif, N. M.
  • Zayed, H. A.
  • Sotelo, Andres
  • Wahab, L. A.
In the present work, a systematic preparation of Bi2Te2.85Se0.15−xSx (x = 0.0, 0.02, 0.04 and 0.06) compositions was carried out by solvothermal method. The materials were characterized by XRD, SEM, EDX, TEM and Raman spectroscopy. XRD, as well as TEM, to confirm the nanostructure of samples. The electrical and thermal properties were investigated in the temperature range from room temperature to 600 K. The highest power factor was 1.3 × 10−2 mW/K2 m at 600 K for (x = 0.06) sample. This improvement in the thermoelectric properties may be due to the ordered atomic arrangement of Bi, Te, and Se induced by sulphur in the Bi2Te2.85Se0.15−xSx nanocomposites, which was confirmed by X-ray diffraction and Raman spectral analysis. The optical properties, such as energy gap, refractive index, extinction coefficient and dielectric constants, were obtained from the diffused reflectance data in the range of 200 to 800 nm. Sulphur doping influences the optical energy gap, reaching the lowest value for x = 0.04 samples (0.14 eV), while the highest allowed energy gap was found in x = 0.06 ones (0.41 eV). Also, It should be mentioned that dielectric constants (εr and εi) were affected due to Sulphur doping, whereas the samples with x = 0.04 and 0.02 have the highest and lowest εr, respectively, and the opposite for εi when increasing the wavelength., A. Sotelo acknowledges Gobierno de Aragón-FEDER (Research Group T 54-17R), and the Spanish MINECO-FEDER (Project MAT2017-82183-C3-1-R) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermoelectric modules built using ceramic legs grown by laser floating zone

  • Ferreira, Nuno M.
  • Lopes, Diogo
  • Kovalevsky, A. V.
  • Costa, F. M.
  • Sotelo, Andres
  • Madre, M. A.
  • Rezania, A.
The present work reports the first attempt of thermoelectric module design, based on oxide materials grown through the laser floating zone technique. Two modules with 4-legs thermoelectric were assembled using Bi2Ba2Co2Oy fibres as p-type legs, while Ca0.9La0.1MnO3 and CaMn0.95Nb0.05O3 fibres were used as n-type legs. Structural and electrical characterisation of the individual fibres was performed, and the results compared to the literature. The evolution of open-circuit voltage on heating and cooling up to 723 K, present the expected trends based on the Seebeck coefficient of the individual fibres, suggesting good reliability of the modules during temperature cycling. The power generation performance was evaluated for a temperature difference up to 500 K under different electric loads. The maximum measured power was ~2.2 mW for a module volume of ~39 mm3. Nevertheless, the module here studies possess better performance than those commercially available., The authors gratefully acknowledge the support of i3N (UIDB/50025/2020 & UIDP/50025/2020), CICECO - Aveiro Institute of Materials (UID/CTM/50011/2020) and the REMOTE project (POCI-01-0145-FEDER-031875), financed by COMPETE 2020 Program (Portugal), National Funds through the FCT/MEC (Portugal) and when appropriate co-financed by FEDER under the Portugal2020 Partnership Agreement. This work was also funded by national funds (OE-Portugal), through FCT – Fundação para a Ciência e a Tecnologia, I.P., in the scope of the framework contract foreseen in the numbers 4, 5 and 6 of the article 23, of the Decree-Law 57/2016, of August 29, changed by Law 57/2017, of July 19. NM Ferreira also acknowledges the grant support from ECIU Research Mobility Fund 2019 edition that allows the visit to Aalborg University to conduct the present study. A. Sotelo and M. A. Madre acknowledge MINECO-FEDER (MAT2017-82183-C3-1-R) and Gobierno de Aragón (Spain) -FEDER (Research Group T54-17R) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning Ca3Co4O9 thermal and transport properties by TiC nanoparticles addition, Ajuste de propiedades térmicas y eléctricas del Ca3Co4O9 por medio de adición de nanopartículas de TiC

  • Amaveda, H.
  • Dura, Oscar J.
  • Mora Alfonso, Mario
  • Torres, M. A.
  • Guelou, Gabin
  • Madre, M. A.
  • Marinel, S.
  • Sotelo, Andres
In Press., [EN]: Ca3Co4O9 + xwt.% TiC (x = 0, 0.25, 0.5, 0.75, and 1.0) polycrystalline thermoelectric ceramics have been prepared through the classical ceramic route. XRD characterization has demonstrated that all samples are mainly composed by the Ca3Co4O9 phase, while microstructural observation has shown that no reaction between both components has been produced. Moreover, TiC particles are well distributed for small additions, and start to agglomerate from 0.75 wt.% content. Density measurements showed that nearly no changes have been produced by TiC addition and nearly the whole porosity appears as open one. Furthermore, electrical resistivity decreases up to 0.75 wt.% addition, increasing for higher content. On the other hand, Seebeck coefficient has been maintained unchanged in all samples. In spite of an irregular behaviour of thermal conductivity with temperature, it tends to decrease when the temperature is raised, displaying the lowest values for the 0.25 wt.% samples. These data led to an increase of about 40% in ZT values at 800 °C for samples with 0.25 wt.% addition, when compared with the pure ones. Finally, linear thermal expansion coefficient is decreased when TiC content is increased, which can be exploited to fit the thermal expansion coefficients of all the components used to build a power generation thermoelectric module., [ES]: Se han preparado cerámicas de composición Ca3Co4O9 + x% en peso de TiC (x = 0, 0,25; 0,5; 0,75, y 1,0) utilizando el método clásico de estado sólido. La caracterización por XRD mostró que la fase termoeléctrica Ca3Co4O9 aparecía como mayoritaria. Las observaciones microestructurales determinaron que no se produce reacción entre esta fase y las partículas de TiC. Estas partículas aparecen bien distribuidas cuando hay pequeñas adiciones y comienzan a aglomerarse a partir del 0,75% en peso. Las medidas de densidad indicaron que este parámetro no se modifica con la adición de TiC y, además, que se produce una porosidad de tipo abierto. La presencia de TiC modifica la resistividad eléctrica de forma que disminuye hasta el 0,75% en peso de TiC, aumentando para contenidos mayores, sin afectar el coeficiente de Seebeck. La conductividad térmica muestra un comportamiento irregular, pero tiende a disminuir al aumentar la temperatura, alcanzando los menores valores en muestras con 0,25% en peso de TiC. Estos resultados llevaron a un aumento del 40% en los valores de ZT a 800 °C en muestras con 0,25% TiC en peso, comparados con los medidos en muestras sin TiC. Finalmente, el coeficiente de dilatación lineal disminuye al aumentar el contenido de TiC, lo que puede utilizarse para ajustar los coeficientes de dilatación de todos los componentes al construir un módulo termoeléctrico de generación de potencia., The authors wish to thank the Gobierno de Aragón-FEDER (Research Group T 54-17R), and the Spanish MINECO (Ministerio de Economía y Competitividad)-FEDER (Project MAT2017-82183-C3-1-R) for financial support. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A study on thermoelectric performance and magnetic properties of Ti-doped Bi2Sr2Co1.8Oy ceramic materials

  • Özçelik, Bekir
  • Çetin, Gize
  • Gürsul, Mehmet
  • Madre, M. A.
  • Sotelo, Andres
Within this study, Bi2Sr2Co1.8-xTixOy ceramic materials (x = 0, 0.05, 0.10, and 0.15) in different forms (bulk, as-grown and annealed fibers) have been produced through the solid state method and textured using the laser floating zone technique. XRD yields similar patterns for all sintered samples and annealed fibers, with major peaks corresponding to the Bi2Sr2Co1.8Oy thermoelectric phase. When observing the different contrasts appearing in the SEM-EDS analysis, it can be deduced that as-grown samples are multiphasic due to their incongruent melting. On the other hand, laser floating zone technique provides good grain alignment, reducing electrical resistivity values. The Seebeck coefficient of all samples is positive demonstrating a conduction mechanism mainly governed by holes. From magnetization and magnetic hysteresis measurements, it can be observed that magnetization values increase with decreasing temperature (dM/dT < 0) and the dM/dH ratio slightly decreases with increasing Ti content., This study was carried out within the scope of Cukurova University Scientific Research Projects Unit FBA-2017-8484. Authors acknowledge Gobierno de Aragón-FEDER (Research Group T 54-17R), and MINECO-FEDER (Project MAT2017-82183-C3-1-R) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Drastic enhancement of mechanical properties of Ca3Co4O9 by B4C addition

  • Amaveda, H.
  • Mora Alfonso, Mario
  • Dura, Oscar J.
  • Torres, M. A.
  • Madre, M. A.
  • Marinel, Sylvain
  • Sotelo, Andres
Ca3Co4O9 with B4C additions in different proportions (0, 0.10, 0.25, 0.5, and 0.75 wt.%) have been fabricated using the classical solid-state method. Powder XRD patterns have displayed that Ca3Co4O9 phase is the major one in all samples. Microstructural observations showed that B4C has been superficially oxidized, producing liquid B2O3 during sintering, and reacting with the Ca3Co4O9 grains to produce bridges between them. In spite of the increase of porosity, these bridges led to an important raise (more than two times) of mechanical properties when compared to the pristine materials. On the other hand, while B4C addition has not influenced S values, it has decreased electrical resistivity, thermal conductivity, and thermal expansion. Consequently, ZT values have been also increased, reaching 0.24 at 800 °C in 0.25 wt.% B4C containing samples, which is very close to the best values reported in the literature, and two times higher than the obtained in pure materials in this work., This study has been funded by the Spanish MINECO-FEDER (Project MAT2017-82183-C3-1-R) and Gobierno de Aragón-FEDER (Research Group T 54-17R). Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Drastic modifcation of low temperature thermoelectric properties of Na‑doped Bi2Sr2Co2Oy ceramics prepared via laser foating zone technique

  • Çetin, Gize
  • Özçelik, Bekir
  • Gürsul, Mehmet
  • Madre, M. A.
  • Sotelo, Andres
  • Adachi, S.
  • Takano, Y.
In this study, Bi2Sr2−xNaxCo2Oy (x = 0.0, 0.05, 0.075, 0.10, and 0.15) ceramic powders have been fabricated via the classical ceramic route, followed by a texturing process through the laser floating zone technique. XRD patterns show the thermoelectric phase as the major one. In addition, Na-substitution reduces the amount of secondary phases, when compared to the pure sample. SEM observations point out that grain orientation is significantly improved when Na-content is increased. Na-substitution reduces electrical resistivity from 35 (in pure samples) to 19.6 mΩ cm (in Na = 0.05 ones) at around room temperature, while Seebeck coefficient is, approximately, twice measured in Na-free. On the other hand, thermal conductivity is slightly lower in undoped samples (0.83 W/K m), when compared to the Na-substituted ones (1.10–1.40 W/K m) at room temperature, due to their lower electrical conductivity. Finally, ZT values are higher when the Na-content is increased, reaching 0.022 at around 400 K., This work is supported by Research Fund of Çukurova University, Adana, Turkey, under grant contracts no: FDK-2016-6105 and FBA-2019-12034. M. A. Madre and A. Sotelo wish to thank the Gobierno de Aragón-FEDER (Research Group T 54-17 R), and the Spanish MINECO-FEDER (MAT2017-82183-C3-1-R) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Increase of electric performances in Bi2Sr2-xRbxCo2O8+δ laser grown ceramics induced by annealing

  • Özçelik, Bekir
  • Çetin, Gize
  • Gürsul, Mehmet
  • Özçelik, S.
  • Torres, M. A.
  • Madre, M. A.
  • Sotelo, Andres
Bi2Sr2-xRbxCo2O8+δ materials with 0 ≤ x ≤ 0.125 were fabricated via the classical solid-state route, and textured using the laser floating zone method. As-grown materials were composed of different secondary phases due to the incongruent melting of this compound. These secondary phases were drastically reduced through an annealing procedure, consisting in heating at 800 °C for 12 h. XRD has not detected any secondary phase on the annealed samples, due to the overlapping of thermoelectric and main secondary phase diffraction peaks. SEM observations have confirmed this microstructural evolution, and shown that Rb-substitution further decreases the secondary phases content and enhances grain orientation. These microstructural features, together with the possible increment of charge carrier concentration due to Rb-doping, decreased electrical resistivity, while Seebeck coefficient has only been slightly reduced. Consequently, the Rb doped samples reached higher power factor (PF) values than the pure ones. The biggest PF values at room temperature (0.11 mW/K2m) are higher than the reported for single crystals (0.07 mW/K2m), while at 650 °C (0.20 mW/K2m), they are also higher than the obtained in textured samples and measured along the conducting plane (0.14 mW/K2m)., This study was carried out within the scope of Cukurova University Scientific Research Projects Unit FBA-2019-12034. The authors wish to thank the Spanish MINECO-FEDER (Project MAT2017-82183-C3-1-R), and the Gobierno de Aragón-FEDER (Research Group T 54-17R) for financial support. Authors acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Detail investigation of thermoelectric performance and magnetic properties of Cs-doped Bi2Sr2Co2Oy ceramic materials

  • Özçelik, Bekir
  • Gürsul, Mehmet
  • Çetin, Gize
  • Özçelik, Can
  • Torres, M. A.
  • Madre, M. A.
  • Sotelo, Andres
Bi2Sr2−xCsxCo2Oy materials with 0 ≤ x ≤ 0.15, have been fabricated via the classical ceramic technique. XRD results have indicated that undoped and Cs-substituted samples are composed of Bi2Sr2Co2Oy phase as the major one. Microstructural studies have demonstrated the formation of a liquid phase, which allows a drastic grain growth. This factor is responsible for a drastic improvement of relative density, reaching about 95% of the theoretical one for 0.125 Cs content. On the other hand, electrical resistivity has been reduced up to 14 mΩ cm at 650 °C for 0.125 Cs content, around 40% lower than the obtained in undoped samples. As a consequence, Seebeck coefficient has been decreased due to the raise in charge carrier concentration. The highest power factor at 650 °C (0.21 mW/K2 m) has been found for 0.125 Cs substituted sample, about 40% larger than the obtained in undoped samples, and very similar to the notified in single crystals (0.26 mW/K2 m). Magnetisation with respect to temperature results have demonstrated that measured samples have a paramagnetic property above 50 K, except 0.10 Cs. Magnetic hysteresis curves have shown that the slopes and the magnitudes have increased with decreasing temperature., This study was carried out within the scope of Cukurova University Scientific Research Projects Unit FBA-2020-13007 and FBA-2020-12784. The authors wish to thank the Spanish MINECO-FEDER (MAT2017-82183-C3-1-R), and Gobierno de Aragón (Research Group T 54-17 R) for funding. The authors wish to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exploring the high-temperature electrical performance of Ca3−xLaxCo4O9 thermoelectric ceramics for moderate and low substitution levels

  • Constantinescu, Gabriel
  • Rasekh, Shahed
  • Amirkhizi, Parisa
  • Lopes, Daniela V.
  • Vieira, Miguel A.
  • Kovalevsky, Andrei V.
  • Diez, J. C.
  • Sotelo, Andres
  • Madre, M. A.
  • Torres, M. A.
This article belongs to the Special Issue Advances in Thermoelectric Materials: From Particle to Bulk., Aliovalent substitutions in Ca3Co4O9 often result in complex effects on the electrical properties and the solubility, and impact of the substituting cation also depends largely on the preparation and processing method. It is also well-known that the monoclinic symmetry of this material’s composite crystal structure allows for a significant hole transfer from the rock salt-type Ca2CoO3 buffer layers to the hexagonal CoO2 ones, increasing the concentration of holes and breaking the electron–hole symmetry from the latter layers. This work explored the relevant effects of relatively low La-for-Ca substitutions, for samples prepared and processed through a conventional ceramic route, chosen for its simplicity. The obtained results show that the actual substitution level does not exceed 0.03 (x < 0.03) in Ca3−xLaxCo4O9 samples with x = 0.01, 0.03, 0.05 and 0.07 and that further introduction of lanthanum results in simultaneous Ca3Co4O9 phase decomposition and secondary Ca3Co2O6 and (La,Ca)CoO3 phase formation. The microstructural effects promoted by this phase evolution have a moderate influence on the electronic transport. The electrical measurements and determined average oxidation state of cobalt at room temperature suggest that the present La substitutions might only have a minor effect on the concentration of charge carriers and/or their mobility. The electrical resistivity values of the Ca3−xLaxCo4O9 samples with x = 0.01, 0.03 and 0.05 were found to be ~1.3 times (or 24%) lower (considering mean values) than those measured for the pristine Ca3Co4O9 samples, while the changes in Seebeck coefficient values were only moderate. The highest power factor value calculated for Ca2.99La0.01Co4O9 (~0.28 mW/K2m at 800 °C) is among the best found in the literature for similar materials. The obtained results suggest that low rare-earth substitutions in the rock salt-type layers can be a promising pathway in designing and improving these p-type thermoelectric oxides, provided by the strong interplay between the mobility of charge carriers and their concentration, capable of breaking the electron–hole symmetry from the conductive layers., G. Constantinescu acknowledges the support of the TEOsINTE project (Grant agreement ID: 101003375), funded under the H2020-EU.4. Programmes (Funding Scheme: MSCA-IF-EF-ST—Standard EF). Partial support of the project REMOTE (POCI-01-0145-FEDER-031875) is also acknowledged. This work was partially developed within the scope of the project CICECO-Aveiro Institute of Materials, UIDB/50011/2020 and UIDP/50011/2020, financed by national funds through the Portuguese Foundation for Science and Technology/MCTES. J.C. Diez, A. Sotelo, M.A. Madre and M.A. Torres acknowledge the financial support of the Spanish MINECO-FEDER project MAT2017-82183-C3-1-R and the Aragón Government (Research Group T54-20R). The technical contributions of C. Estepa, and C. Gallego are highly appreciated and acknowledged. Sh. Rasekh acknowledges the support of the Research Employment Contract FCT–CEECIND/02608/2017. P. Amirkhizi acknowledges the financial support of the Portuguese FCT Doctoral Studentship 2020.08051.BD. D. V. Lopes acknowledges the financial support of the research fellowship BI/UI50/9051/2020 provided by the European Commission (project SIDERWIN-DLV-768788—Horizon 2020/SPIRE10)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Significant enhancement of superconducting performances of Bi-2212 fibers through combined sodium substitution and LFZ process

  • Gürsul, Mehmet
  • Ergin, İbrahim
  • Özçelik, Can
  • Depci, Tolga
  • Özçelik, Bekir
  • Madre, M. A.
  • Sotelo, Andres
This paper reports the microstructure, magnetoresistivity, electrical and superconducting properties of Bi-2212 fibers with Na+ ions incorporated into a superconducting matrix prepared by a polymer solution method and additionally textured through the laser floating zone process. XRD patterns showed that Bi-2212 phase is the major one with mostly (00ℓ) diffractions due to the grain alignment, independently of Na content. SEM micrographs showed that samples are composed of well-stacked and oriented grains. The irreversibility field (Hirr), upper critical magnetic field (Hc2), coherence length (ξ), and activation energies (U) have been calculated using magnetoresistivity measurements and explained based on the thermally activated flux flow (TAFF) model. Considering the resistivity-temperature graph for zero field, Tc values tend to increase from 84.8 K (for the pure sample) to 93.2 K (for 0.075Na sample), slightly decreasing for higher content. Besides, transition temperature width (ΔTc = Tconset − Tcoffset) decreases with the increment in the Na content and reaches its minimum value (ΔTc = 3.7 K) in 0.075Na sample. However, broadening of superconducting transition has been observed with applied field and Tc values decreased to 76.1 K for the pure sample and 86.8 K for 0.075Na sample. Likewise, the activation energies of the samples also decreases significantly with the increase of the magnetic field and the activation energies of the Na-containing samples are found to be higher than the pure sample at each magnetic field value. Hc2(0) values are calculated as 33.8, 43.8, 50.1, 33.1, and 21.4 T for 0.0, 0.075, 0.10, and 0.20 T Na samples, respectively. As a consequence, referring to all experimental results and theoretical findings, the superconducting characteristics improve regularly with Na-doping until x = 0.075 due to increment in the interaction of superconducting clusters, decrement in weak-links and stabilization of charge carriers in CuO2 conducting planes., A. Sotelo and M. A. Madre acknowledge Spanish MINECO-FEDER (Project MAT2017-82183-C3-1-R) and Gobierno de Aragón-FEDER (Research Group T 54-20R) for funding. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning thermoelectric properties of Bi2Ca2Co2Oy through K doping and laser floating zone processing

  • Özçelik, Can
  • Depci, Tolga
  • Gürsul, Mehmet
  • Çetin, Gize
  • Özçelik, Bekir
  • Torres, M. A.
  • Madre, M. A.
  • Sotelo, Andres
In the present study, thermoelectric Bi2Ca2-xKxCo2Oy ceramic materials (x = 0.0, 0.05, 0.075, 0.10, and 0.125) in different forms (called bulk, as-grown and annealed fibers) have been manufactured via a classical solid-state method and textured using the laser floating zone (LFZ) technique. The identification and characteristics of undoped and doped samples were determined by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The XRD patterns of all samples have shown great similarity, and the major peaks can be assigned to the Bi2Sr2Co2Oy thermoelectric phase, independently of the processing technique and K-doping. SEM-EDS have indicated the randomly oriented plate like grains of different sizes in bulk sample, evolving to longer and well-oriented grain structure through K-doping and LFZ. Because of the incongruent melting properties of compound, the high number of secondary phases formed in the as-grown samples. In order to reduce it, an annealing and K-doping process have been applied. The microstructural evolution is reflected on the electrical properties, and the lowest resistivity values are found in the annealed K-doped fibers. Seebeck coefficient is positive in all cases, pointing out to p-type conduction mechanism. These modifications led to PF values up to 0.162 mW/(K2m), obtained in 0.10 K-doped annealed fibers at 650 °C., The results used in the framework of this study are related to the MSc thesis of C. Özçelik. B.Ö thanks to Cukurova University Scientific Research Projects Unit for the project (FBA-2020-13007). M. A. Torres, M. A. Madre, and A. Sotelo acknowledge MINECO-FEDER (MAT2017-82183-C3-1-R, and Gobierno de Aragón-FEDER (Research Group T54-20R) for funding. Authors acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Assessment of the laser floating zone processing of thermoelectric CuFe1–xNixO2 delafossites and their magnetic characterisation

  • Ferreira, Nuno M.
  • Grillo, J. G.
  • Ferro, M. C.
  • Dura, Oscar J.
  • Madre, M. A.
  • Kovalevsky, Andrei V.
  • Costa, Florinda M.
  • Sotelo, Andres
This work assesses the feasibility of processing CuFe1-xNixO2 (x = 0, 0.02) using the Laser Floating Zone (LFZ) technique to grow fibres with different pulling rates, to tune their thermoelectric performance. Structural analysis showed CuFeO2 as the major phase. Formation of secondary phases is promoted by Ni addition, diminishing with decreasing pulling rate. Grain alignment and crystallite size of the fibres increase with the puling rate and doping. Electrical conductivity is enhanced by decreasing the pulling rate, while Ni-doping decreases the conductivity, and Seebeck coefficient demonstrates quite complex behaviour. Thermal conductivity decreases with temperature and with the pulling rate and Ni-doping. A maximum ZT value of 0.17 was achieved for 10 mm h-1 sample at 1000 K for pure, and 700 K for Ni-doped samples. These ZT values are higher than found in the literature, demonstrating the feasibility of the LFZ method for processing thermoelectric delafossites, indicating a proper optimisation process., This work was developed within the scope of the project i3N (LA/P/0037/2020 & UIDB/50025/2020 & UIDP/50025/2020) and CICECO-Aveiro Institute of Materials (UIDB/50011/2020 & UIDP/50011/2020), financed by national funds through the FCT/MEC and when appropriate co-financed by FEDER under the PT2020 Partnership Agreement. This work was funded by national funds (OE), through FCT – Fundação para a Ciência e a Tecnologia, I.P., in the scope of the framework contract foreseen in the numbers 4, 5 and 6 of the article 23, of the Decree-Law 57/2016, of August 29, changed by Law 57/2017, of July 19. M. A. Madre and A. Sotelo acknowledge the Spanish MINECO-FEDER (Project MAT2017–82183-C3–1-R) and Gobierno de Aragón-FEDER (Research Group T 54–20R) for funding. The support of the project POCI-01–0145-FEDER-031875, financed by COMPETE 2020 Program and National Funds through the FCT/MEC and when applicable co-financed by FEDER under the PT2020 Partnership Agreement, is greatly acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Detailed low temperature studies on thermoelectric performance of K-doped Bi2Ca2Co2Oy ceramics fibers

  • Özçelik, Can
  • Depci, Tolga
  • Çetin, Gize
  • Gürsul, Mehmet
  • Özçelik, Bekir
  • Madre, M. A.
  • Sotelo, Andres
  • Ando, H.
  • Terashima, K.
  • Takano, Y.
The effect of K substitution for Ca in Bi2Ca2-xKxCo2Oy (x = 0.0, 0.05, 0.075, 0.10, and 0.125) thermoelectric ceramics, produced via laser floating zone (LFZ) method, have been systematically investigated. XRD patterns are quite similar for all samples and main peaks in the patterns correspond to reflection planes of the thermoelectric phase together with small amount of secondary phases. SEM micrographs revealed well oriented grains along the growth direction, and the presence of three different contrasts, associated through EDS to different phases, namely, black (Co oxide), white (Bi poor phase) and grey (Bi2Ca2Co1.7Oy TE phase). It was also seen that the amount of secondary phases diminishes with K-increase. The room-temperature resistivity values sharply decrease from 0.75 mΩ.m for the undoped sample to 0.44 mΩ.m for the 0.05 K-doped one, increasing for higher doping. Seebeck coefficient also decreases from 190 μV K−1 in the pristine sample, to 160 μV K−1 in all the K-doped ones, at 390 K. Thermal conductivity increases with temperature up to around 250 K, decreasing at higher temperatures. Thermal conductivity at 390 K decreases from 1.1 W K−1 m−1 in the pristine sample to lower values by K-doping, reaching the minimum, 0.9 W K−1 m−1, in the 0.125 K-doped one. As a result, the highest ZT value of has been determined in 0.05 K-doped sample, around 0.021 at 390 K., This study was carried out within the scope of Cukurova University Scientific Research Projects Unit FBA-202114163, FBA-2020-12784, FBA-2022-14414. The authors wish to thank the Spanish MINECO-FEDER (MAT2017-82183-C3-1-R), and Gobierno de Aragón (Research Group T54-20R) for funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced thermoelectric properties in Bi2Sr2-XBaxCo2Oy ceramics by Ba doping

  • Özkurt, Berdan
  • Madre, M. A.
  • Sotelo, Andres
  • Torres, M. A.
Bi2Sr2-xBaxCo2Oy polycrystalline samples (0.00 ≤ × ≤ 0.15) were prepared through the classical solid-state reaction method. It has been found that Ba-doped Bi2Sr2Co2Oy was obtained as major phase in all samples, based on XRD results. On the other hand, SEM studies have shown the presence of small amounts of secondary phases. The electrical resistivity values of all Ba doped samples decreased when compared to the undoped one, being minimum for the 0.075Ba doped ones. Seebeck coefficient increase with the increasing temperature in all samples, reaching the highest values in the 0.025 Ba doped sample. Finally, power factor has been calculated using the Seebeck coefficient and electrical resistivity values to determine the thermoelectric performances of samples. The maximum PF value of 0.14 mW/K2 m at 650 °C was obtained for 0.075Ba doped sample, which is around 25% higher than the undoped sample at the same temperature. All these results clearly show that the thermoelectric properties of the Bi2Sr2Co2Oy system can be improved by Ba doping at optimal values., A. Sotelo, M. A. Madre and M. A. Torres acknowledge the Spanish MINECO-FEDER (MAT2017-82183-C3-1-R) and Gobierno de Aragón-FEDER (Research group T54-20R), for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Evaluation of pressure and temperature effect on the structure and properties of Ca2.93Sr0.07Co4O9 ceramic materials

  • Torres, M. A.
  • Madre, M. A.
  • Dura, Oscar J.
  • García, Gustavo
  • Marinel, Sylvain
  • Martínez-Filgueira, Pablo
  • Sotelo, Andres
In this work, the effect of hot-pressing conditions on the performances of Sr-doped Ca3Co4O9 materials has been investigated. The samples were prepared from attrition milled precursors, which reduced the processing time. Samples were hot-pressed at temperatures (T) between 800 and 900 °C and pressures (P) from 51 to 71 MPa. The out-of-plane X-ray diffraction (XRD) showed that all samples are formed by the thermoelectric phase, with a good grain orientation which is improved with T, and P, as demonstrated by their Lotgering factor. The observations through Scanning Electron Microscopy (SEM) have revealed that grain sizes and orientation are enhanced with T, and P, as well as density through Archimedes's method. All these trends are reflected in the flexural strength and microhardness. The electrical resistivity is lower when the T, or P, is increased, reaching 6.4 mΩ cm for samples processed at 900 °C and 71 MPa, which is about the best reported values in the literature. On the other hand, contrarily to the expected results, they also showed the highest S values, 182 μV/K, which are similar to the best reported values for highly dense textured materials. Thermal conductivity values do not follow a regular evolution with the hot-pressing conditions, probably due to internal stresses, reaching the lowest values at 800 °C in samples processed at 800 °C and 51 MPa (1.51 W/(K*m)) or 900 °C and 61 MPa (1.53 W/(K*m)). Consequently, the highest ZT values have been determined in samples processed at 900 °C and 61 MPa (0.35) which is higher than the best reported values in literature for bulk textured samples, to the best of our knowledge., The authors wish to thank the Spanish MINECO-FEDER project (MAT2017-82183-C3-1-R) and the Aragón Government (Research Group T54-20R), for their <grant-highlight>financial support</grant-highlight>. The Regional Development Agency of the Basque Country (SPRI) is acknowledged for the economic <grant-highlight>support</grant-highlight> through the Programa ELKARTEK (KK-2020/00113, HARVESTGEN research project). The use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of ceramic particles additions on the properties of Ca3Co4O9

  • Amaveda, H.
  • Mora Alfonso, Mario
  • Dura, Oscar J.
  • Torres, M. A.
  • Madre, M. A.
  • Marinel, Sylvain
  • Sotelo, Andres
Ca3Co4O9 + x wt% B4C, AlN, TiC, TiB2, or TiN (x = 0.0, 0.25, 0.50, and 0.75) samples were prepared by the conventional solid-state route. In all samples, only the Ca3Co4O9 phase was identified by powder XRD. Nevertheless, microstructural studies have shown that most of the additives have reacted with air and Ca3Co4O9 phase on their surfaces, producing new phases. Moreover, it seemed that grain sizes were, at least, slightly reduced. On the other hand, while nearly no modification of the Seebeck coefficient has been observed, independently of the added compound and proportion, electrical resistivity decreased in all cases, when compared to the pristine sample. Consequently, the power factor of samples with additions was higher than the one determined for the pure sample. Linear thermal expansion also decreased with these additives, pointing out to the formation of relatively strong grain boundaries which can improve the carrier mobility and decrease the thermal expansion. The lowest thermal expansion value has been measured in 0.25 wt% B4C samples, being only around 20% higher than that of Al2O3, which can help to reduce the differential thermal expansion in thermoelectric modules working at high temperatures; these results may be very interesting for applications prospects., This study was funded by MINECO-FEDER (MAT2017-82183-C3-1-R) and Gobierno de Aragón-FEDER (T54-20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Low temperature thermoelectric properties of Na-substituted Bi2Ca2Co2Oy ceramics fabricated via LFZ technique

  • Özçelik, Bekir
  • Çetin, Gize
  • Gürsul, Mehmet
  • Özçelik, Can
  • Depci, Tolga
  • Madre, M. A.
  • Sotelo, Andres
  • Ando, H.
  • Terashima, K.
  • Takano, Y.
In this work, Bi2Ca2-xNaxCo2Oy with x = 0.0, 0.05, 0.10, and 0.125 thermoelectric ceramic materials have been produced by the classical solid-state route, followed by texturing through the laser floating zone (LFZ) method. All specimens showed similar XRD patterns, with the main peaks corresponding to the (00l) plane reflections of the thermoelectric Bi2Ca2Co2Oy phase, independently of Na substitution. In addition, small amount of Co-free Ca4Bi6O13 secondary phase has been identified. SEM micrographs showed that annealing procedure after the texturing process allows obtaining higher proportion of thermoelectric phase, decreasing the number and amount of secondary phases. Electrical resistivity is very similar for all samples at room temperature, about 0.62 mΩ m. However, below 50 K, Na-substitution decreases resistivity when compared to the undoped one, reaching values around 9.41, 6.48, 5.00, and 2.07 mΩ m for x = 0, 0.05, 0.1, and 0.125 samples at 50 K, respectively. Seebeck coefficient values at room temperature decrease from 180 to 145 μV/K, for the pure and 0.125Na doped samples, respectively. Thermal conductivity tends to linearly increase with temperature up to around 200 K, decreasing for higher ones. Thermal conductivity values are slightly higher in undoped samples (1.2 W/K m), when compared to the Na-substituted ones (1.10–1.30 W/K m) at room temperature. Finally, the highest ZT value is around 0.018 at 400 K for the 0.10Na doped samples., This study was carried out within the scope of Cukurova University Scientific Research Projects Unit FBA-2020-13007. A. Sotelo and M. A. Madre wish to thank the Spanish MINECO-FEDER (MAT2017-82183-C3-1-R), and Gobierno de Aragón (Research Group T54-20R) for funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Role of Y substitution for Ca-site on magneto-resistivity properties of Bi-2212 superconductor rods prepared by LFZ

  • Gürsul, Mehmet
  • Özçelik, Can
  • Ergin, İbrahim
  • Madre, M. A.
  • Sotelo, Andres
  • Özçelik, Bekir
This comprehensive study delves into the effect of partial Y3+ substitution for Ca2+ in Bi2Sr2CaCu2O8+y superconducting rods prepared by the laser floating zone method (LFZ). The critical transition temperatures (Tconset, Tc, Tcoffset), activation energy (U), irreversibility field (Hirr), upper critical magnetic field (Hc2), coherence length (ξ), and penetration depth (λ) are determined by means of magneto-resistivity measurements performed between 0 and 5 T. According to the resistivity-temperature graph for zero fields, Tcoffset values tend to decrease regularly from 90.8 K to 87.1 K, and the residual resistivity values increase steadily from 0.14 to 9.7 mΩ .cm with the Y-content. The change of these two parameters is a sign that Y-introduction into the Bi-2212 matrix undermines the inter-grain coupling and increases the level of permanent-defects in the crystalline structure. However, the relatively high Tcoffset values and extremely low residual resistivity, especially in the pure and low Y-substituted samples, reflect the success of the LFZ process in growing homogeneous and well-oriented Bi-2212 grains. The resistivity transition broadening is observed when the applied field increases and Tcoffset values decrease dramatically, i.e. from 90.8 K to 72.1 K for the pure sample and from 87.1 K to 48.2 K for the 0.20Y-substituted ones. The calculated U values using the TAFF model decrease with the increase of the Y-content and the magnetic field. In addition, the magnetic field and temperature dependence of U is expressed by using U(H,T)~ΔT H−η equation. Deduced parameters of Hirr and Hc2 from magneto-resistivity curves and theoretical findings of ξ and λ also favor the degradation of U values with the augmentation of Y-content in the Bi-2212 rods., A. Sotelo and M.A. Madre acknowledge the Spanish MINECO-FEDER project (MAT2017-82183-C3-1-R) and the Aragón Government (Research Group T54-20R) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

U-type unileg thermoelectric module: A novel structure for high-temperature application with long lifespan

  • Wang, Xue
  • Wang, Hongchao
  • Su, Wenbing
  • Chen, Tingting
  • Tan, Chang
  • Madre, M. A.
  • Sotelo, Andres
  • Wang, Chunlei
Strong thermal stress caused by high temperature and difference of thermal expansion coefficient (CTE) will negatively influence the lifespan of the thermoelectric module. In this work, a new high-temperature CaMnO3-based U-type unileg thermoelectric module, combining a unileg structure with pn-junction, is proposed and investigated. The novel design avoids the device failure due to different CTEs and high temperature gradients. As a result, the maximal thermal stress (σmax,TEM) of 3.31 GPa and fatigue life of 41686 cycles are 46 % and 132 % of those of traditional modules at 6 W and 300 K, respectively. To further relieve stress concentration, the effect of rounded corners (ru, rl), Ag layer thickness (HAg) and length of right legs (LR), have been studied. It has been found that larger ru, and rl are suitable to relieve the local stress concentration, and the lowest σmax,TEM and highest power (Pmax) are achieved at (ru,rl)=(0.1,0) and (0,0.5). Moreover, larger LR and HA are beneficial for mechanical properties by decreasing the peak stress and dispersing the high thermal stress regions, while module performance is improved at lower LR and HAg. Results obtained from this U-type unileg thermoelectric module should influence and guide the design and optimization of high-temperature thermoelectric generators., The work is financially supported by National Key R&D Program of China of 2017YFE0195200, the Natural Science Fund of China under grant Nos. 51871134 and 52111530034, the Science Fund of Shandong Province under grant No. ZR2019MEM007, and Qilu Young Scholar Program of Shandong University. M. A. Madre, and A. Sotelo also acknowledge the MINECO-FEDER (MAT2017-82183-C3-1-R) and Gobierno de Aragón-FEDER (Research Group T54-17R) for funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Variation of mechanical and electrical performances of Bi2Ca2Co1.7Ox ceramics above working conditions

  • Rasekh, Shahed
  • Ghanbari, M.
  • Natoli, A.
  • Torres, M. A.
  • Madre, M. A.
  • Sotelo, Andres
This work explores the effect of exposing the Bi2Ca2Co1.7Ox-textured ceramics at temperatures above working conditions, on mechanical and electrical properties. Microstructural studies have shown a first improvement of microstructure with an important grain growth, followed by the formation of porosity and the appearance of cracks for larger times. These features were reflected on their mechanical and electrical properties. Three point bending tests have revealed an increase of bending strength with the thermal treatment, reaching the maximum at 24 h and decreasing for further treatment time, which is very slight for times larger than 196 h. On the other hand, electrical resistivity is drastically reduced with the thermal treatment when compared to the as-grown samples. Moreover, the samples behavior is modified from semiconducting-like for as-grown samples to metallic-like for the thermally treated ones. Accordingly, Seebeck coefficient is decreased with the thermal treatment, being very similar for all thermally treated samples. As a consequence of the drastic decrease of electrical resistivity, although with lower reduction on the Seebeck coefficient, all thermally treated samples display higher power factor values than the as-grown ones. The highest values at 650 °C (0.29 mW/K2 m) have been obtained in textured samples thermally treated for 48 h, which are comparable to the best values reported in the literature without the use of expensive materials., M. A. Torres, M. A. Madre, and A. Sotelo acknowledge the Spanish MINECO-FEDER (MAT2017-82183-C3-1-R) and Gobierno de Aragón-FEDER (Research group T54-20R), for financial support. Sh. Rasekh acknowledges the support of the Research Employment Contract FCT–CEECIND/02608/2017., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Drastic microstructural modification of Bi2Ca2Co2Oy ceramics by Na doping and laser texturing, Modificaciones drásticas en la microestructura de la cerámica Bi2Ca2Co2Oy inducidas por dopado con Na y texturado

  • Özçelik, Can
  • Depci, Tolga
  • Gürsul, Mehmet
  • Çetin, Gize
  • Özçelik, Bekir
  • Torres, M. A.
  • Madre, M. A.
  • Sotelo, Andres
[EN] Bi2Ca2−xNaxCo2Oy materials with x = 0 ≤ x ≤ 0.125, have been prepared either by sintering through the classical ceramic method, or textured using the laser floating zone technique. XRD results have shown that Bi2Ca2Co2Oy phase is the major one, independently of the Na content, in both kind of samples. SEM studies have shown a drastic microstructural modification between sintered and laser-textured materials. Na-doping increases density and grain sizes in sintered materials, while it enhances grain alignment in laser-grown materials. Moreover, it decreases secondary phase content in all cases. Electrical resistivity is also drastically reduced through texturing, when compared to the sintered samples, and Na-doping further decreases it. The lowest values determined in the laser-textured samples (26 mΩ cm at 650 °C) are around 40% lower than the best in sintered materials. On the other hand, S has been only slightly affected for Na-doping or processing method for all samples. Consequently, the highest power factor at 650 °C (0.18 mW/K2 m) has been obtained in laser-grown 0.075Na-doped samples, which is around 20 and 70% higher than the measured in undoped laser-textured samples, and sintered ones, respectively., [ES] Se han preparado materiales de composición Bi2Ca2-xNaxCo2Oy, con x = 0 ≤ x ≤ 0,125, por el método de estado sólido, además de texturarlos mediante la técnica de zona flotante inducida por láser. Los resultados de XRD han mostrado que la fase Bi2Ca2Co2Oy aparece como la mayoriraria, independientemente del contenido de Na, en ambos tipos de muestras. Los estudios SEM han encontrado una drástica modificación microestructural entre materiales sinterizados y texturados. El dopado con Na aumenta la densidad y el tamaño de grano en materiales sinterizados, mientras que mejora la orientación de los granos en materiales texturados. Además, disminuye el contenido de fases secundarias en todos los casos. La resistividad eléctrica disminuye drásticamente con el texturado, en comparación con las muestras sinterizadas, mientras que el dopado con Na la disminuye aún más. Los valores más bajos determinados en muestras texturadas (26 mΩ cm a 650 °C) son alrededor del 40% menor que los mejores datos publicados en materiales sinterizados. Por otro lado, S solo se ha visto afectado levemente, tanto por el dopado como por el método de procesado. En consecuencia, el máximo factor de potencia a 650 °C (0,18 mW/K2 m) se ha obtenido en muestras dopadas con 0,075 Na y texturadas, que es alrededor de un 20 a un 70% superior al medido en muestras texturadas sin dopar y sinterizadas, respectivamente., This study was carried out within the scope of Cukurova University Scientific Research Projects Unit FBA-2020-13007. The authors wish to thank the Spanish MINECO-FEDER (MAT2017-82183-C3-1-R), and Gobierno de Aragón (Research Group T 54-20 R) for funding. The authors wish to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Substrate-induced modification of microstructure and thermoelectric properties in Sr-doped Ca3Co4O9 thick films

  • Sotelo, Andres
  • Mora Alfonso, Mario
  • Amaveda, H.
  • Torres, M. A.
  • Madre, M. A.
Resumen del trabajo presentado a la XVII Conference Ceramics in Europe, celebrada en Krakow (Poland), del 10 al 14 de julio de 2022., The authors wish to thank the Spanish MINECO-FEDER project (MAT2017-82183-C3-1-R) and the Aragón Government (Research Group T54-20R), for their financial support. The Regional Development Agency of the Basque Country (SPRI) is acknowledged for the economic support through the Programa ELKARTEK (KK-2020/00113, HARVESTGEN research project)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Anomalous grain growth in sintered Bi2Ca2Co2−xCuxOy + Ag ceramic composites by Cu doping

  • Amaveda, H.
  • Madre, M. A.
  • Mora Alfonso, Mario
  • Torres, M. A.
  • Sotelo, Andres
Bi2Ca2Co2 − xCuxOy + 4 wt%Ag (with x between 0 and 0.20) thermoelectric materials were prepared through a sol-gel method via nitrates. Powder XRD patterns showed the presence of thermoelectric phase as the major one, accompanied by metallic silver. SEM observations identified three different secondary phases in the samples, together with an exaggerated grain growth with Cu doping. The microstructural modifications are reflected in an important decrease of electrical resistivity, ∼ 3% when compared to undoped samples, due to the reduction on the number of grain boundaries, and the increase of Co4+ in the conducting layer. The minimum values at 650 ºC were obtained in 0.10 Cu-doped samples, 69 mΩ cm, which are lower than the reported in sintered samples. On the other hand, Seebeck coefficient was only slightly affected and reached the highest values at 650 ºC in 0.15 Cu-doped samples, 215 µV/K, which is practically the same measured in undoped ones, 211 µV/K, and lower than those reported for sintered samples. Consequently, the highest PF at 650 ºC has been determined in 0.10 Cu-doped samples, which is around 50% higher than the obtained in samples prepared through the classical solid-state method, or the undoped ones prepared in this work., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., This research has been supported by the Spanish MINECO-FEDER project (Grant No. MAT2017-82183-C3-1-R) and the Aragón Government (Research Group T54-20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning thermoelectric properties of Ca0.9Gd0.1MnO3 by laser processing

  • Ferreira, Nuno M.
  • Sarabando, Artur R.
  • Ferro, M. C.
  • Madre, M. A.
  • Dura, Oscar J.
  • Sotelo, Andres
Donor-doped CaMnO3 is an n-type semiconductor with perovskite structure, being considered as a potential n-type leg in thermoelectric modules. This oxide presents stability at high temperatures and allows tuning the relevant electrical and thermal transport properties through doping. In this work, Ca0.9Gd0.1MnO3 precursors have been prepared to produce fibres through the laser floating zone technique using different pulling rates. However, as-grown fibres did not present thermoelectric properties due to the presence of high amounts of secondary phases, leading to very high electrical resistivity values. The results have highlighted the importance of annealing procedures to reduce electrical resistivity, due to the decrease of secondary phases amount, and producing promising thermoelectric performances. The annealed samples present higher ZT values when the growth rate is decreased, reaching around 0.22 for the lowest growth rate, which is very close to the best values reported in the literature for these materials. Moreover, this procedure possesses an additional advantage considering that these samples can be directly used as n-type legs in thermoelectric modules for high-temperature applications. However, further studies should be made to determine the optimal amount of dopant., The authors gratefully acknowledge the support of i3N (UID/CTM/50025/2019) and CICECO-Aveiro Institute of Materials (UID/CTM/50011/2019), financed by national funds through the FCT/MEC and when appropriate co-financed by FEDER under the PT2020 Partnership Agreement. This work is funded by national funds (OE), through FCT—Fundação para a Ciência e a Tecnologia, I.P., in the scope of the framework contract foreseen in the numbers 4, 5 and 6 of the article 23, of the Decree-Law 57/2016, of August 29, changed by Law 57/2017, of July 19. M. A. Madre and A. Sotelo recognize the MINECO-FEDER (MAT2017-82183-C3-1-R) and Gobierno de Aragon-FEDER (Research Group T 54-17 R) for funding., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Influence of Ag on the properties of Ca0.9Yb0.1MnO3 sintered ceramics

  • Sotelo, A.
  • Torres, M.A.
  • Madre, M.A.
  • Diez, J.C.
In this study, Ca0.9Yb0.1MnO3 + x wt.% Ag (with x = 0, 1, 3, 5, and 10) thermoelectric materials were prepared via the classical ceramic method. In spite of the very high sintering temperature (1300 °C), no significant Ag losses were observed following this process. Moreover, Ag addition enhanced cation mobility during sintering due to the formation of a liquid phase. Microstructurally, it was found that Ag decreases porosity; this was confirmed by density measurements. Ag was also found to promote the formation of a Ca2Mn2O5 secondary phase. Despite the presence of this secondary phase, samples with Ag displayed lower electrical resistivity than Ag-free ones, without a drastic decrease in the absolute Seebeck coefficient. The highest thermoelectric performances, which were determined by power factor, were obtained in 1 wt.% Ag samples. These maximum values are slightly higher than the best of those reported in the literature for sintered materials with similar compositions, with the additional advantage of their being obtained using a much shorter sintering procedure.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Effect of simultaneous K, and Yb substitution for Ca on the microstructural and thermoelectric characteristics of CaMnO3 ceramics

  • Sotelo, A.
  • Depriester, M.
  • Torres, M.A.
  • Sahraoui, A.H.
  • Madre, M.A.
  • Diez, J.C.
CaMnO3-based materials are very attractive among n-type thermoelectric oxides for high-temperature applications when they are appropriately doped. The main drawback of these materials is the cost associated to the necessary rare earth cations. This work aims decreasing the amount of these materials through a partial substitution of Ca2+ by an equimolar mixture of K+ and Yb3+, Ca1-x(K0.5Yb0.5)xMnO3, with x = 0.05, 0.10, 0.15, and 0.20. XRD studies have confirmed that the thermoelectric phase is the major one in all samples. Microstructure has shown the formation of large crystals, and an increasing porosity when the substitution is raised. This evolution has been confirmed through density measurements. Electrical resistivity has been drastically decreased for the 0.10 substituted samples, compared with the 0.05 ones, slightly increasing for higher substitution. On the other hand, absolute Seebeck coefficient and thermal conductivity are lower when the substitution is raised. The best ZT values have been achieved for the 0.10 substituted samples, which are around the typical reported in the literature for higher doping level. These results clearly point out to a decrease of the necessary rare earth dopant content to achieve similar performances in CaMnO3 ceramics, which is of the main economic significance for their industrial production.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Improvement of thermoelectric properties of Ca0.9Gd0.1MnO3 by powder engineering through K2CO3 additions

  • Ferreira, N.M.
  • Ferro, M.C.
  • Sarabando, A.R.
  • Ribeiro, A.
  • Davarpanah, A.
  • Amaral, V.
  • Madre, M.A.
  • Kovalevsky, A.V.
  • Torres, M.A.
  • Costa, F.M.
  • Sotelo, A.
Oxide materials based on calcium manganite show clear prospects as thermoelectrics, provided by their stability at high temperatures and inherent flexibility in tuning the relevant electrical and thermal transport properties. Donor-doped CaMnO3 is an n-type semiconductor with a perovskite structure and relatively high thermoelectric performance. In this work, the precursor powders have been modified through potassium carbonate additions to produce Ca0.9Gd0.1MnO3 pellets without the usual delamination problems occurring during the compaction process. In order to demonstrate the relevant effects, several samples with different amounts of potassium carbonate (0–15 wt%) have been prepared. The results showed that potassium additions significantly facilitate the compaction procedure, while also improving the thermoelectric performances. The results also highlight the importance of porosity control for improving ZT, by decreasing the thermal conductivity without reduction of the electrical performance. The highest ZT values were observed for the samples processed at 15 wt% of potassium carbonate addition, exhibiting an improvement at least 30% at 800 °C when compared to the pure samples.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Effect of substrate on the microstructure and thermoelectric performances of Sr-doped Ca3Co4O9 thick films

  • Torres, M.A.
  • Mora, M.
  • Amaveda, H.
  • Madre, M.A.
  • Sotelo, A.
Ca3Co4O9 thermoelectric materials in form of thick films are very promising in practical applications due to their low costs and relatively high performance. In this work, two different suspensions have been used to produce different coatings on Al2O3 polycrystalline substrates with theoretical green thickness of 360 and 2000¿µm. Moreover, the effect of substrate has also been investigated using Al2O3 monocrystalline substrates and a 360¿µm green thickness. Sintering procedure at 900¿°C for 24¿h has drastically decreased coating thickness. XRD performed on the coatings surface has shown the formation of small amounts of Ca3Co2O6 secondary phase on the polycrystalline substrates, while it was more abundant, and accompanied by Ca2Co2O5 on the monocrystalline substrates. In spite of the higher secondary phases content, monocrystalline substrates produced a slight grain orientation which led to the highest thermoelectric properties between the samples (0.38¿mW/K2m at 800¿°C), and very close to the best reported values in the literature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Significant enhancement of the thermoelectric performance in Ca3Co4O9 thermoelectric materials through combined strontium substitution and hot-pressing process

  • Torres, M.A.
  • Costa, F.M.
  • Flahaut, D.
  • Touati, K.
  • Rasekh, S.
  • Ferreira, N.M.
  • Allouche, J.
  • Depriester, M.
  • Madre, M.A.
  • Kovalevsky, A.V.
  • Diez, J.C.
  • Sotelo, A.
This work explores the possibilities for a further enhancement of the thermoelectric properties of Ca3Co4O9 by Sr-doping combined with hot-pressing. Modified hot-pressing process resulted in highly-textured and dense ceramics. Sr-doping significantly improves electrical properties, resulting in extremely large power factor (1.2 mW/K2m at 800 °C) due to simultaneous electrical resistivity decrease and Seebeck coefficient increase. The main effect on cumulative electrical performance is provided by the Seebeck coefficient, reaching 270µV/K at 800 °C. XPS revealed relatively high average cobalt oxidation state at room temperature (+3.3), compared to materials produced by conventional sintering. The results of combined XPS and Auger electron spectroscopy emphasize the importance of high densification in Ca3Co4O9-based ceramics for preventing phase decomposition and interaction with CO2 and moisture. Still, despite the exceptional electrical performance, the calculated figure-of-merit (estimated as 0.29 at 800 °C) is around the best reported in the literature due to a high thermal conductivity (4.4 W/K m at room temperature).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Improving thermoelectric properties of Ca 3 Co 4 O 9+d through both Na doping and K addition at optimal values

  • Özkurt, B.
  • Aytekin, M.E.
  • Madre, M.A.
  • Sotelo, A.
  • Torres, M.A.
Ca 2.93 Na 0.07 Co 4 O y /x wt% K 2 CO 3 (x = 0.00, 0.01, and 0.03) polycrystalline ceramics were prepared by conventional solid-state method. XRD results have shown that all samples predominantly include Ca 3 Co 4 O 9 phase together with small amounts of secondary phases. SEM images show that all samples have randomly oriented plate-like grains in different sizes. The electrical resistivity measurement showed that electrical properties of Ca 3 Co 4 O 9 ceramics can be improved significantly by both, Na doping and K addition at their optimal values. The effect of dopants on thermoelectric properties of Ca 3 Co 4 O 9 was examined by both, Seebeck coefficient and power factor, being higher in K-added than in the pure samples, indicating that thermoelectric properties of samples are positively affected when alkaline elements enter into their structure.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Low temperature thermoelectric properties of K-substituted Bi 2 Sr 2 Co 2 O y ceramics prepared via laser floating zone technique

  • Özçelik, B.
  • Çetin, G.
  • Gürsul, M.
  • Madre, M.A.
  • Sotelo, A.
  • Adachi, S.
  • Takano, Y.
In the present study, Bi 2 Sr 2-x K x Co 2 O y (x = 0.0, 0.050, 0.075, 0.100, and 0.15) ceramic precursors have been produced using the classical ceramic route, followed by texturing through the laser floating zone technique. XRD results show that the thermoelectric phase is the major one in all cases. Moreover, K-substitution decreases the secondary phases content, when compared to the undoped sample. SEM observations indicate that grain orientation is significantly enhanced when K-content is increased. K-doping decreases electrical resistivity from 32 10 -5 O m (in undoped samples) to 20–22 10 -5 O m at 300 K, while increasing Seebeck coefficient from 55 µV/K to 100–117 µV/K at 300 K. On the other hand, thermal conductivity is slightly lower in undoped samples (0.93 W/K m, compared to 1.10–1.28 W/K m for doped ones at 300 K), due to their lower electrical conductivity. Finally, ZT values are higher when the K-content increases up to x = 0.10, reaching 0.029 at around 400 K, and slightly decreasing for higher doping levels.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Effect of annealing and potassium substitution on the thermoelectric and magnetic properties of directionally grown Bi 2 Sr 2 Co 2 O y ceramics

  • Cetin, G
  • Ozcelik, B
  • Gursul, M
  • Torres, Miguel Ángel
  • Madre, María A
  • Sotelo, Andrés
Bi2Sr2-xKxCo2Oy (x = 0.0, 0.025, 0.050, 0.075, 0.100, 0.125, and 0.15) ceramic materials have been fabricated using a classical ceramic process, followed by texturing through directional solidification. SEM analysis of samples, before and after annealing has shown that grains were aligned along the growth direction. While as-grown samples have several phases, besides the thermoelectric one, the annealed ones show much higher thermoelectric phase content. In addition, K-substitution increases the thermoelectric phase content and enhances grain orientation. These improvements decrease the electrical resistivity without significant changes in Seebeck coefficient. The maximum power factor value for 0.10K-substituted annealed samples has been found as 0.20 mW/K2 m. This is superior to the highest reported for hot-pressed materials. However, all samples have similar magnetic properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Tuning Ca3Co4O9 thermal and transport properties by TiC nanoparticles addition

  • Amaveda, H.
  • Dura, O.J.
  • Mora, M.
  • Torres, M.A.
  • Guelou, G.
  • Madre, M.A.
  • Marinel, S.
  • Sotelo, A.
Ca3Co4O9 + xwt.% TiC (x = 0, 0.25, 0.5, 0.75, and 1.0) polycrystalline thermoelectric ceramics have been prepared through the classical ceramic route. XRD characterization has demonstrated that all samples are mainly composed by the Ca3Co4O9 phase, while microstructural observation has shown that no reaction between both components has been produced. Moreover, TiC particles are well distributed for small additions, and start to agglomerate from 0.75 wt.% content. Density measurements showed that nearly no changes have been produced by TiC addition and nearly the whole porosity appears as open one. Furthermore, electrical resistivity decreases up to 0.75 wt.% addition, increasing for higher content. On the other hand, Seebeck coefficient has been maintained unchanged in all samples. In spite of an irregular behaviour of thermal conductivity with temperature, it tends to decrease when the temperature is raised, displaying the lowest values for the 0.25 wt.% samples. These data led to an increase of about 40% in ZT values at 800 °C for samples with 0.25 wt.% addition, when compared with the pure ones. Finally, linear thermal expansion coefficient is decreased when TiC content is increased, which can be exploited to fit the thermal expansion coefficients of all the components used to build a power generation thermoelectric module.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Detail investigation of thermoelectric performance and magnetic properties of Cs-doped Bi2Sr2Co2Oy ceramic materials

  • Özçelik, B.
  • Gürsul, M.
  • Çetin, G.
  • Özçelik, C.
  • Torres, M.A.
  • Madre, M.A.
  • Sotelo, A.
Bi2Sr2-xCsxCo2Oy materials with 0 = x = 0.15, have been fabricated via the classical ceramic technique. XRD results have indicated that undoped and Cs-substituted samples are composed of Bi2Sr2Co2Oy phase as the major one. Microstructural studies have demonstrated the formation of a liquid phase, which allows a drastic grain growth. This factor is responsible for a drastic improvement of relative density, reaching about 95% of the theoretical one for 0.125 Cs content. On the other hand, electrical resistivity has been reduced up to 14 mO cm at 650 °C for 0.125 Cs content, around 40% lower than the obtained in undoped samples. As a consequence, Seebeck coefficient has been decreased due to the raise in charge carrier concentration. The highest power factor at 650 °C (0.21 mW/K2 m) has been found for 0.125 Cs substituted sample, about 40% larger than the obtained in undoped samples, and very similar to the notified in single crystals (0.26 mW/K2 m). Magnetisation with respect to temperature results have demonstrated that measured samples have a paramagnetic property above 50 K, except 0.10 Cs. Magnetic hysteresis curves have shown that the slopes and the magnitudes have increased with decreasing temperature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Improvement of grain alignment in Bi2Sr2Co1.8Oy thermoelectric through the electrically assisted laser floating zone

  • Ferreira, N.M.
  • Madre, M.A.
  • Torres, M.A.
  • Davarpanah, A.
  • Amaral, V.
  • Costa, F.M.
  • Sotelo, A.
Thermoelectric performances of cobaltite ceramics were improved by increasing grain sizes and alignment through the Electrically Assisted Laser Floating Zone method. Bi2Sr2Co1.8Oy ceramics were directionally grown at 30 mm/h, applying external DC (0-500 mA) during the growth process. Microstructure and thermoelectric properties are significantly influenced by the external current direction and intensity. Negative currents/pole on the seed rod prevent the formation of thermoelectric phase, while positive pole on the seed rod, decreases the amount of secondary phases and increase grain orientation when compared to samples grown without current. Annealing procedure decreases secondary phases content, without modifying grain alignment. The best thermoelectric performances were obtained for samples grown with +300 mA, reaching the highest ZT values of 0.09 at 650 °C. Moreover, it should be highlighted that these processed samples can be directly applied in thermoelectric modules, avoiding the long and expensive steps necessary when other preparation processes are used.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Preparation, structural characteristics and optical parameters of the synthesized nano-crystalline sulphur-doped Bi2Te2.85Se0.15 thermoelectric materials

  • Shalaby, M.S.
  • Hashem, H.M.
  • Yousif, N.M.
  • Zayed, H.A.
  • Sotelo, A.
  • Wahab, L.A.
In the present work, a systematic preparation of Bi2Te2.85Se0.15-xSx (x = 0.0, 0.02, 0.04 and 0.06) compositions was carried out by solvothermal method. The materials were characterized by XRD, SEM, EDX, TEM and Raman spectroscopy. XRD, as well as TEM, to confirm the nanostructure of samples. The electrical and thermal properties were investigated in the temperature range from room temperature to 600 K. The highest power factor was 1.3 × 10-2 mW/K2 m at 600 K for (x = 0.06) sample. This improvement in the thermoelectric properties may be due to the ordered atomic arrangement of Bi, Te, and Se induced by sulphur in the Bi2Te2.85Se0.15-xSx nanocomposites, which was confirmed by X-ray diffraction and Raman spectral analysis. The optical properties, such as energy gap, refractive index, extinction coefficient and dielectric constants, were obtained from the diffused reflectance data in the range of 200 to 800 nm. Sulphur doping influences the optical energy gap, reaching the lowest value for x = 0.04 samples (0.14 eV), while the highest allowed energy gap was found in x = 0.06 ones (0.41 eV). Also, It should be mentioned that dielectric constants (er and ei) were affected due to Sulphur doping, whereas the samples with x = 0.04 and 0.02 have the highest and lowest er, respectively, and the opposite for ei when increasing the wavelength.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Drastic enhancement of mechanical properties of Ca3Co4O9 by B4C addition

  • Amaveda, H.
  • Mora, M.
  • Dura, O.J.
  • Torres, M.A.
  • Madre, M.A.
  • Marinel, S.
  • Sotelo, A.
Ca3Co4O9 with B4C additions in different proportions (0, 0.10, 0.25, 0.5, and 0.75 wt.%) have been fabricated using the classical solid-state method. Powder XRD patterns have displayed that Ca3Co4O9 phase is the major one in all samples. Microstructural observations showed that B4C has been superficially oxidized, producing liquid B2O3 during sintering, and reacting with the Ca3Co4O9 grains to produce bridges between them. In spite of the increase of porosity, these bridges led to an important raise (more than two times) of mechanical properties when compared to the pristine materials. On the other hand, while B4C addition has not influenced S values, it has decreased electrical resistivity, thermal conductivity, and thermal expansion. Consequently, ZT values have been also increased, reaching 0.24 at 800 °C in 0.25 wt.% B4C containing samples, which is very close to the best values reported in the literature, and two times higher than the obtained in pure materials in this work.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Drastic modification of low temperature thermoelectric properties of Na-doped Bi2Sr2Co2Oy ceramics prepared via laser floating zone technique

  • Çetin, G.
  • Özçelik, B.
  • Gürsul, M.
  • Madre, M.A.
  • Sotelo, A.
  • Adachi, S.
  • Takano, Y.
In this study, Bi2Sr2-xNaxCo2Oy (x = 0.0, 0.05, 0.075, 0.10, and 0.15) ceramic powders have been fabricated via the classical ceramic route, followed by a texturing process through the laser floating zone technique. XRD patterns show the thermoelectric phase as the major one. In addition, Na-substitution reduces the amount of secondary phases, when compared to the pure sample. SEM observations point out that grain orientation is significantly improved when Na-content is increased. Na-substitution reduces electrical resistivity from 35 (in pure samples) to 19.6 mO cm (in Na = 0.05 ones) at around room temperature, while Seebeck coefficient is, approximately, twice measured in Na-free. On the other hand, thermal conductivity is slightly lower in undoped samples (0.83 W/K m), when compared to the Na-substituted ones (1.10–1.40 W/K m) at room temperature, due to their lower electrical conductivity. Finally, ZT values are higher when the Na-content is increased, reaching 0.022 at around 400 K.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Tuning thermoelectric properties of Ca0.9Gd0.1MnO3 by laser processing

  • Ferreira, N.M.
  • Sarabando, A.R.
  • Ferro, M.C.
  • Madre, M.A.
  • Dura, O.J.
  • Sotelo, A.
Donor-doped CaMnO3 is an n-type semiconductor with perovskite structure, being considered as a potential n-type leg in thermoelectric modules. This oxide presents stability at high temperatures and allows tuning the relevant electrical and thermal transport properties through doping. In this work, Ca0.9Gd0.1MnO3 precursors have been prepared to produce fibres through the laser floating zone technique using different pulling rates. However, as-grown fibres did not present thermoelectric properties due to the presence of high amounts of secondary phases, leading to very high electrical resistivity values. The results have highlighted the importance of annealing procedures to reduce electrical resistivity, due to the decrease of secondary phases amount, and producing promising thermoelectric performances. The annealed samples present higher ZT values when the growth rate is decreased, reaching around 0.22 for the lowest growth rate, which is very close to the best values reported in the literature for these materials. Moreover, this procedure possesses an additional advantage considering that these samples can be directly used as n-type legs in thermoelectric modules for high-temperature applications. However, further studies should be made to determine the optimal amount of dopant.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Exploring the high-temperature electrical performance of Ca3-xLaxCo4O9 thermoelectric ceramics for moderate and low substitution levels

  • Constantinescu G.
  • Rasekh S.
  • Amirkhizi P.
  • Lopes D.V.
  • Vieira M.A.
  • Kovalevsky A.V.
  • Diez J.C.
  • Sotelo Mieg A.E.
  • Madre Sediles, M.A.
  • Torres Portero, M.A.
Aliovalent substitutions in Ca3Co4O9 often result in complex effects on the electrical properties and the solubility, and impact of the substituting cation also depends largely on the preparation and processing method. It is also well-known that the monoclinic symmetry of this material’s composite crystal structure allows for a significant hole transfer from the rock salt-type Ca2CoO3 buffer layers to the hexagonal CoO2 ones, increasing the concentration of holes and breaking the electron-hole symmetry from the latter layers. This work explored the relevant effects of relatively low La-for-Ca substitutions, for samples prepared and processed through a conventional ceramic route, chosen for its simplicity. The obtained results show that the actual substitution level does not exceed 0.03 (x < 0.03) in Ca3-xLaxCo4O9 samples with x = 0.01, 0.03, 0.05 and 0.07 and that further introduction of lanthanum results in simultaneous Ca3Co4O9 phase decomposition and secondary Ca3Co2O6 and (La, Ca)CoO3 phase formation. The microstructural effects promoted by this phase evolution have a moderate influence on the electronic transport. The electrical measurements and determined average oxidation state of cobalt at room temperature suggest that the present La substitutions might only have a minor effect on the concentration of charge carriers and/or their mobility. The electrical resistivity values of the Ca3-xLaxCo4O9 samples with x = 0.01, 0.03 and 0.05 were found to be ~1.3 times (or 24%) lower (considering mean values) than those measured for the pristine Ca3Co4O9 samples, while the changes in Seebeck coefficient values were only moderate. The highest power factor value calculated for Ca2.99La0.01Co4O9 (~0.28 mW/K2m at 800 °C) is among the best found in the literature for similar materials. The obtained results suggest that low rare-earth substitutions in the rock salt-type layers can be a promising pathway in designing and improving these p-type thermoelectric oxides, provided by the strong interplay between the mobility of charge carriers and their concentration, capable of breaking the electron-hole symmetry from the conductive layers. © 2021 by the authors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Drastic microstructural modification of Bi2Ca2Co2Oy ceramics by Na doping and laser texturing

  • Özçelik, C.
  • Depci, T.
  • Gürsul, M.
  • Çetin, G.
  • Özçelik, B.
  • Torres, M.A.
  • Madre, M.A.
  • Sotelo, A.
Bi2Ca2-xNaxCo2Oy materials with x = 0 = x = 0.125, have been prepared either by sintering through the classical ceramic method, or textured using the laser floating zone technique. XRD results have shown that Bi2Ca2Co2Oy phase is the major one, independently of the Na content, in both kind of samples. SEM studies have shown a drastic microstructural modification between sintered and laser-textured materials. Na-doping increases density and grain sizes in sintered materials, while it enhances grain alignment in laser-grown materials. Moreover, it decreases secondary phase content in all cases. Electrical resistivity is also drastically reduced through texturing, when compared to the sintered samples, and Na-doping further decreases it. The lowest values determined in the laser-textured samples (26 mO cm at 650 °C) are around 40% lower than the best in sintered materials. On the other hand, S has been only slightly affected for Na-doping or processing method for all samples. Consequently, the highest power factor at 650 °C (0.18 mW/K2 m) has been obtained in laser-grown 0.075Na-doped samples, which is around 20 and 70% higher than the measured in undoped laser-textured samples, and sintered ones, respectively. Se han preparado materiales de composición Bi2Ca2-xNaxCo2Oy, con x = 0 ≤ x ≤ 0,125, por el método de estado sólido, además de texturarlos mediante la técnica de zona flotante inducida por láser. Los resultados de XRD han mostrado que la fase Bi2Ca2Co2Oy aparece como la mayoriraria, independientemente del contenido de Na, en ambos tipos de muestras. Los estudios SEM han encontrado una drástica modificación microestructural entre materiales sinterizados y texturados. El dopado con Na aumenta la densidad y el tamaño de grano en materiales sinterizados, mientras que mejora la orientación de los granos en materiales texturados. Además, disminuye el contenido de fases secundarias en todos los casos. La resistividad eléctrica disminuye drásticamente con el texturado, en comparación con las muestras sinterizadas, mientras que el dopado con Na la disminuye aún más. Los valores más bajos determinados en muestras texturadas (26 mΩ cm a 650 °C) son alrededor del 40% menor que los mejores datos publicados en materiales sinterizados. Por otro lado, S solo se ha visto afectado levemente, tanto por el dopado como por el método de procesado. En consecuencia, el máximo factor de potencia a 650 °C (0,18 mW/K2 m) se ha obtenido en muestras dopadas con 0,075 Na y texturadas, que es alrededor de un 20 a un 70% superior al medido en muestras texturadas sin dopar y sinterizadas, respectivamente.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Evaluation of pressure and temperature effect on the structure and properties of Ca2.93Sr0.07Co4O9 ceramic materials

  • Torres M.A.
  • Madre M.A.
  • Dura O.J.
  • García G.
  • Marinel S.
  • Martinez-Filgueira P.
  • Sotelo A.
In this work, the effect of hot-pressing conditions on the performances of Sr-doped Ca3Co4O9 materials has been investigated. The samples were prepared from attrition milled precursors, which reduced the processing time. Samples were hot-pressed at temperatures (T) between 800 and 900 °C and pressures (P) from 51 to 71 MPa. The out-of-plane X-ray diffraction (XRD) showed that all samples are formed by the thermoelectric phase, with a good grain orientation which is improved with T, and P, as demonstrated by their Lotgering factor. The observations through Scanning Electron Microscopy (SEM) have revealed that grain sizes and orientation are enhanced with T, and P, as well as density through Archimedes''s method. All these trends are reflected in the flexural strength and microhardness. The electrical resistivity is lower when the T, or P, is increased, reaching 6.4 mO cm for samples processed at 900 °C and 71 MPa, which is about the best reported values in the literature. On the other hand, contrarily to the expected results, they also showed the highest S values, 182 µV/K, which are similar to the best reported values for highly dense textured materials. Thermal conductivity values do not follow a regular evolution with the hot-pressing conditions, probably due to internal stresses, reaching the lowest values at 800 °C in samples processed at 800 °C and 51 MPa (1.51 W/(K*m)) or 900 °C and 61 MPa (1.53 W/(K*m)). Consequently, the highest ZT values have been determined in samples processed at 900 °C and 61 MPa (0.35) which is higher than the best reported values in literature for bulk textured samples, to the best of our knowledge. © 2021 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Significant enhancement of superconducting performances of Bi-2212 fibers through combined sodium substitution and LFZ process

  • Gürsul, M.
  • Ergin, I.
  • Özçelik, C.
  • Depci, T.
  • Özçelik, B.
  • Madre, M.A.
  • Sotelo, A.
This paper reports the microstructure, magnetoresistivity, electrical and superconducting properties of Bi-2212 fibers with Na+ ions incorporated into a superconducting matrix prepared by a polymer solution method and additionally textured through the laser floating zone process. XRD patterns showed that Bi-2212 phase is the major one with mostly (00l) diffractions due to the grain alignment, independently of Na content. SEM micrographs showed that samples are composed of well-stacked and oriented grains. The irreversibility field (Hirr), upper critical magnetic field (Hc2), coherence length (¿), and activation energies (U) have been calculated using magnetoresistivity measurements and explained based on the thermally activated flux flow (TAFF) model. Considering the resistivity-temperature graph for zero field, Tc values tend to increase from 84.8 K (for the pure sample) to 93.2 K (for 0.075Na sample), slightly decreasing for higher content. Besides, transition temperature width (¿Tc = Tconset - Tcoffset) decreases with the increment in the Na content and reaches its minimum value (¿Tc = 3.7 K) in 0.075Na sample. However, broadening of superconducting transition has been observed with applied field and Tc values decreased to 76.1 K for the pure sample and 86.8 K for 0.075Na sample. Likewise, the activation energies of the samples also decreases significantly with the increase of the magnetic field and the activation energies of the Na-containing samples are found to be higher than the pure sample at each magnetic field value. Hc2(0) values are calculated as 33.8, 43.8, 50.1, 33.1, and 21.4 T for 0.0, 0.075, 0.10, and 0.20 T Na samples, respectively. As a consequence, referring to all experimental results and theoretical findings, the superconducting characteristics improve regularly with Na-doping until x = 0.075 due to increment in the interaction of superconducting clusters, decrement in weak-links and stabilization of charge carriers in CuO2 conducting planes. © 2021, The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Tuning thermoelectric properties of Bi2Ca2Co2Oy through K doping and laser floating zone processing

  • Özçelik, C.
  • Depci, T.
  • Gürsul, M.
  • Çetin, G.
  • Özçelik, B.
  • Torres, M.A.
  • Madre, M.A.
  • Sotelo, A.
In the present study, thermoelectric Bi2Ca2-xKxCo2Oy ceramic materials (x = 0.0, 0.05, 0.075, 0.10, and 0.125) in different forms (called bulk, as-grown and annealed fibers) have been manufactured via a classical solid-state method and textured using the laser floating zone (LFZ) technique. The identification and characteristics of undoped and doped samples were determined by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The XRD patterns of all samples have shown great similarity, and the major peaks can be assigned to the Bi2Sr2Co2Oy thermoelectric phase, independently of the processing technique and K-doping. SEM-EDS have indicated the randomly oriented plate like grains of different sizes in bulk sample, evolving to longer and well-oriented grain structure through K-doping and LFZ. Because of the incongruent melting properties of compound, the high number of secondary phases formed in the as-grown samples. In order to reduce it, an annealing and K-doping process have been applied. The microstructural evolution is reflected on the electrical properties, and the lowest resistivity values are found in the annealed K-doped fibers. Seebeck coefficient is positive in all cases, pointing out to p-type conduction mechanism. These modifications led to PF values up to 0.162 mW/(K2m), obtained in 0.10 K-doped annealed fibers at 650 °C. © 2021 Elsevier Masson SAS
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

U-type unileg thermoelectric module: A novel structure for high-temperature application with long lifespan

  • Wang, Xue
  • Wang, Hongchao
  • Su, Wenbing
  • Chen, Tingting
  • Tan, Chang
  • Madre, María A.
  • Sotelo, Andres
  • Wang, Chunlei
Strong thermal stress caused by high temperature and difference of thermal expansion coefficient (CTE) will negatively influence the lifespan of the thermoelectric module. In this work, a new high-temperature CaMnO3-based U-type unileg thermoelectric module, combining a unileg structure with pn-junction, is proposed and investigated. The novel design avoids the device failure due to different CTEs and high temperature gradients. As a result, the maximal thermal stress (σmax,TEM) of 3.31 GPa and fatigue life of 41686 cycles are 46 % and 132 % of those of traditional modules at 6 W and 300 K, respectively. To further relieve stress concentration, the effect of rounded corners (ru, rl), Ag layer thickness (HAg) and length of right legs (LR), have been studied. It has been found that larger ru, and rl are suitable to relieve the local stress concentration, and the lowest σmax,TEM and highest power (Pmax) are achieved at (ru,rl)=(0.1,0) and (0,0.5). Moreover, larger LR and HA are beneficial for mechanical properties by decreasing the peak stress and dispersing the high thermal stress regions, while module performance is improved at lower LR and HAg. Results obtained from this U-type unileg thermoelectric module should influence and guide the design and optimization of high-temperature thermoelectric generators.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Anomalous grain growth in sintered Bi2Ca2Co2-xCuxOy + Ag ceramic composites by Cu doping

  • Amaveda, H.
  • Madre, M. A.
  • Mora, M.
  • Torres, M. A.
  • Sotelo, A.
Bi2Ca2Co2 − xCuxOy + 4 wt%Ag (with x between 0 and 0.20) thermoelectric materials were prepared through a sol-gel method via nitrates. Powder XRD patterns showed the presence of thermoelectric phase as the major one, accompanied by metallic silver. SEM observations identified three different secondary phases in the samples, together with an exaggerated grain growth with Cu doping. The microstructural modifications are reflected in an important decrease of electrical resistivity, ∼ 3% when compared to undoped samples, due to the reduction on the number of grain boundaries, and the increase of Co4+ in the conducting layer. The minimum values at 650 ºC were obtained in 0.10 Cu-doped samples, 69 mΩ cm, which are lower than the reported in sintered samples. On the other hand, Seebeck coefficient was only slightly affected and reached the highest values at 650 ºC in 0.15 Cu-doped samples, 215 µV/K, which is practically the same measured in undoped ones, 211 µV/K, and lower than those reported for sintered samples. Consequently, the highest PF at 650 ºC has been determined in 0.10 Cu-doped samples, which is around 50% higher than the obtained in samples prepared through the classical solid-state method, or the undoped ones prepared in this work.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Variation of mechanical and electrical performances of Bi2Ca2Co1.7Ox ceramics above working conditions

  • Rasekh, S.
  • Ghanbari, M.
  • Natoli, A.
  • Torres, M. A.
  • Madre, M. A.
  • Sotelo, A.
This work explores the effect of exposing the Bi2Ca2Co1.7Ox-textured ceramics at temperatures above working conditions, on mechanical and electrical properties. Microstructural studies have shown a first improvement of microstructure with an important grain growth, followed by the formation of porosity and the appearance of cracks for larger times. These features were reflected on their mechanical and electrical properties. Three point bending tests have revealed an increase of bending strength with the thermal treatment, reaching the maximum at 24 h and decreasing for further treatment time, which is very slight for times larger than 196 h. On the other hand, electrical resistivity is drastically reduced with the thermal treatment when compared to the as-grown samples. Moreover, the samples behavior is modified from semiconducting-like for as-grown samples to metallic-like for the thermally treated ones. Accordingly, Seebeck coefficient is decreased with the thermal treatment, being very similar for all thermally treated samples. As a consequence of the drastic decrease of electrical resistivity, although with lower reduction on the Seebeck coefficient, all thermally treated samples display higher power factor values than the as-grown ones. The highest values at 650 °C (0.29 mW/K2 m) have been obtained in textured samples thermally treated for 48 h, which are comparable to the best values reported in the literature without the use of expensive materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Detailed low temperature studies on thermoelectric performance of K-doped Bi2Ca2Co2Oy ceramics fibers

  • Özçelik, C.
  • Depci, T.
  • Çetin, G.
  • Gürsul, M.
  • Özçelik, B.
  • Madre, M. A.
  • Sotelo, A.
  • Ando, H.
  • Terashima, K.
  • Takano, Y.
The effect of K substitution for Ca in Bi2Ca2-xKxCo2Oy (x = 0.0, 0.05, 0.075, 0.10, and 0.125) thermoelectric ceramics, produced via laser floating zone (LFZ) method, have been systematically investigated. XRD patterns are quite similar for all samples and main peaks in the patterns correspond to reflection planes of the thermoelectric phase together with small amount of secondary phases. SEM micrographs revealed well oriented grains along the growth direction, and the presence of three different contrasts, associated through EDS to different phases, namely, black (Co oxide), white (Bi poor phase) and grey (Bi2Ca2Co1.7Oy TE phase). It was also seen that the amount of secondary phases diminishes with K-increase. The room-temperature resistivity values sharply decrease from 0.75 mO.m for the undoped sample to 0.44 mO.m for the 0.05 K-doped one, increasing for higher doping. Seebeck coefficient also decreases from 190 µV K-1 in the pristine sample, to 160 µV K-1 in all the K-doped ones, at 390 K. Thermal conductivity increases with temperature up to around 250 K, decreasing at higher temperatures. Thermal conductivity at 390 K decreases from 1.1 W K-1 m-1 in the pristine sample to lower values by K-doping, reaching the minimum, 0.9 W K-1 m-1, in the 0.125 K-doped one. As a result, the highest ZT value of has been determined in 0.05 K-doped sample, around 0.021 at 390 K. © 2022 IOP Publishing Ltd.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Enhanced thermoelectric properties in Bi2Sr2-XBaxCo2Oy ceramics by Ba doping

  • Özkurt, B.
  • Madre Sediles, M. A.
  • Sotelo Mieg, A.
  • Torres Portero, M. A.
Bi2Sr2-xBaxCo2Oy polycrystalline samples (0.00 = × =0.15) were prepared through the classical solid-state reaction method. It has been found that Ba-doped Bi2Sr2Co2Oy was obtained as major phase in all samples, based on XRD results. On the other hand, SEM studies have shown the presence of small amounts of secondary phases. The electrical resistivity values of all Ba doped samples decreased when compared to the undoped one, being minimum for the 0.075Ba doped ones. Seebeck coefficient increase with the increasing temperature in all samples, reaching the highest values in the 0.025 Ba doped sample. Finally, power factor has been calculated using the Seebeck coefficient and electrical resistivity values to determine the thermoelectric performances of samples. The maximum PF value of 0.14 mW/K2 m at 650 °C was obtained for 0.075Ba doped sample, which is around 25% higher than the undoped sample at the same temperature. All these results clearly show that the thermoelectric properties of the Bi2Sr2Co2Oy system can be improved by Ba doping at optimal values. © 2022 Elsevier B.V.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Influence of ceramic particles additions on the properties of Ca3Co4O9

  • Amaveda, H.
  • Mora, M.
  • Dura, O. J.
  • Torres, M. A.
  • Madre, M. A.
  • Marinel, S.
  • Sotelo, A.
Ca3Co4O9 + x wt% B4C, AlN, TiC, TiB2, or TiN (x = 0.0, 0.25, 0.50, and 0.75) samples were prepared by the conventional solid-state route. In all samples, only the Ca3Co4O9 phase was identified by powder XRD. Nevertheless, microstructural studies have shown that most of the additives have reacted with air and Ca3Co4O9 phase on their surfaces, producing new phases. Moreover, it seemed that grain sizes were, at least, slightly reduced. On the other hand, while nearly no modification of the Seebeck coefficient has been observed, independently of the added compound and proportion, electrical resistivity decreased in all cases, when compared to the pristine sample. Consequently, the power factor of samples with additions was higher than the one determined for the pure sample. Linear thermal expansion also decreased with these additives, pointing out to the formation of relatively strong grain boundaries which can improve the carrier mobility and decrease the thermal expansion. The lowest thermal expansion value has been measured in 0.25 wt% B4C samples, being only around 20% higher than that of Al2O3, which can help to reduce the differential thermal expansion in thermoelectric modules working at high temperatures; these results may be very interesting for applications prospects. Article highlights: Addition of different ceramic additives to Ca3Co4O9 phase increases electrical conductivity, and power factor.All additive ceramics react with oxygen and the Ca3Co4O9 phase modifying the properties of pristine compound.The decrease of thermal expansion coefficient will allow reducing the differential thermal expansion in modules.