Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Advancing liquid scintillation spectra deconvolution for radiological characterization: comparative techniques for multi-isotope activity assessment

  • Pérez-Baeza, Mireia
  • Carlos Alberola, Sofía|||0000-0002-0637-325X
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Sáez-Muñoz, Marina|||0000-0003-0180-7167
  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
[EN] In order to effectively control the level of radioactivity, faster analysis processing times are required. Therefore, new protocols must be developed and existing ones updated. Mathematical deconvolution methods, such as those based on adjusting the shape of the individual spectra of the isotopes, can be applied to separate these spectra, allowing a faster identification and quantification of the radioisotopes of interest. In this paper, several techniques based on Fourier series, Laguerre polynomials, Legendre polynomials, and Savitzky¿Golay filter are used for spectral filtering, while multivariate statistical calibration techniques, such as least squares and partial least squares regressions, are used for spectral deconvolution and the prediction of the activity of beta emitters measured by liquid scintillation counting (63Ni, 55Fe, 14C, 3H, 89Sr, and 90Sr). The results obtained for all the techniques analyzed are accurate, considering the maximum relative biases obtained in comparison with the reference activities and the maximum reconstruction errors of the spectra. Different relative biases are observed in the calculation of the activities of each radioisotope under study. Generally, the relative biases obtained are less than 20% for all techniques applied in most of the test samples. However, this difference is not so evident in terms of the reconstruction of the spectra, obtaining a maximum error of about 4.5%. Among all the techniques applied, the combination of Legendre polynomials or Laguerre polynomials and partial least squares regression offers the best results., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work has been funded by the Consejo de Seguridad Nuclear within the research project "Desarrollo de una aplicacion de codigo abierto para la deconvolucion de espectros y su validacion en equipos de centelleo liquido" (ACADE, SUBV-1 2023). The authors also thanks to Generalitat Valenciana for the support in the "Development of the Emergency Radiological Surveillance Plan" in the Valencian Community (Spain). Mireia Perez-Baeza also thanks to Universitat Politecnica de Valencia for the postdoctoral contract funding "Desarrollo de metodos rapidos y fiables para la caracterizacion radiologica en matrices complejas" (PAID-10-24).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Focusing performance of Fibonacci tiling-based zone plates

  • Garmendía-Martínez, Adrián
  • Muñoz-Pérez, Francisco Misael|||0000-0002-0313-5029
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Furlan, Walter D.
[EN] In this work, we present the Fibonacci Tiling-Based Zone Plates (FTZPs) characterized by a Fibonacci binary array generated using complementary substitution rules applied in both horizontal and vertical directions. The resulting array forms a quasiperiodic structured pattern where each row and column corresponds to a Fibonacci sequence or its Boolean complement. This array defines a transmittance function in a normalized spatial domain, partitioned into rectangulars sub-regions. Unlike conventional Fibonacci zone plates, which feature concentric rings, the FTZP consists of transparent and opaque rectangles, offering unique optical properties advantageous for diffraction-based applications. The intensity distribution along the optical axis and the evolution of transverse diffraction patterns are investigated through both numerical simulation and experimental measurements., This research was funded by grants from the Ministerio de Ciencias e Innovación (grant PID2022-142407NB-100) and the Generalitat Valenciana (grant CIPROM/2022/30), Spain. F.M.M.P. and A.G.M. acknowledge the financial support from the Universitat Politècnica de València (PAID-10-24) and from the Generalitat Valenciana (GRISOLIAP/2021/121), respectively
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Boosting TiO2 photocatalytic hydrogen production via silica-core engineering, optimized shell architecture, and Pd nanoparticles decoration

  • Diego-López, Ander|||0000-0001-5947-9579
  • Tamarit-Mayo, Lorena
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bosca Mayans, Francisco
[EN] Photocatalytic wastewater photoreforming is recognized as a sustainable method for hydrogen generation. In this study, a SiO2@TiO2¿Pd photocatalyst was rationally designed to achieve a balance among high photocatalytic efficiency, ease of recovery, and recyclability. This work also addresses unexplored factors, including the role of the SiO2 core in H2 evolution and the influence of the TiO2 shell thickness on photocatalytic performance. To this end, several core@shell SiO2@TiO2 photocatalysts with controlled TiO2 shell thicknesses were synthesized. The experiments on H2 evolution from glycerol photoreforming revealed that the hydrogen evolution rate is strongly influenced by both the TiO2 shell thickness and the SiO2 core, with the optimum TiO2 shell thickness (ca. 28 nm) photocatalyst showing a hydrogen generation rate 7 times higher than that of P25 (based on hydrogen evolution reaction, HER, rates normalized to the photoactive component of the materials). Decoration of the surface of the optimized SiO2@TiO2 photocatalyst with Pd nanoparticles further increased the hydrogen production rate per photoactive gram by 54-fold (31.9 mmol·h¿1·g¿1). To understand the mechanisms underlying the improved photocatalytic performance, photophysical and (photo)electrochemical characterizations were performed using laser flash photolysis, photoluminescence spectroscopy, and photocurrent measurements. Overall, this study demonstrates that a SiO2 core not only facilitates easier photocatalyst recovery but also positively influences its H2 production performance, resulting in a material 371 times more active than P25. These findings pave the way for the development of SiO2-supported photocatalysts for simultaneous treatment of wastewater and hydrogen production in continuous-flow systems., The authors would like to acknowledge the Spanish Ministry of Science, Innovation and Universities (TED2021-131952B-I00 and PID2023-151872OB-I00, financed by MCIN/AEI/10.130 39/501100011033 and by European Union NextGenerationEU/PRTR) . Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.130 39/501100011033) is gratefully acknowledged. This research was supported by Generalitat Valenciana through CLEAN-LAGOON project (PROMETEO/CIPROM-2024-49) . A. Diego-Lopez is indebted to the Universitat Politecnica de Valencia for the corresponding Predoctoral FPI fellowship (FPI-UPV/Subprograma 1, PAID-01-22) . L. Tamarit is grateful to the Universitat Politecnica de Valencia for the corresponding co-financed postdoctoral grant (PAID-10-24) . The authors would like to acknowledge the Servei de Microscopia Electronica from the Universitat Politecnica de Valencia (UPV) for the support in the materials characterization and sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Performance and QTL mapping of eggplant lines with Solanum insanum introgressions under contrasting nitrogen levels in substrate and hydroponic growing systems

  • Villanueva-Párraga, Gloria|||0000-0002-1475-2882
  • Gramazio, Pietro|||0000-0003-2226-7999
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Mauceri, Antonio
  • Misale, Laura
  • Abenavoli, Maria Rosa
  • Sunseri, Francesco
[EN] Improving nitrogen use efficiency (NUE) is a key objective for reducing fertilizer dependence and environmental impact while maintaining productivity. In this study, a set of eggplant (Solanum melongena) introgression lines (ILs) carrying defined S. insanum genomic segments, together with their recurrent parent and the F1 hybrid, were evaluated under two nitrogen (N) levels, low (LN) and high (HN), in two growing systems: pots with substrate under greenhouse and hydroponics in a climatic chamber. Phenotyping included measurements of biomass, nitrogen and carbon contents, physiological indices and NUE components, with root architecture additionally assessed in hydroponics. Significant effects of genotype, N treatment and their interaction were observed for most traits in both growing systems. Principal component analyses (PCA) revealed a clear separation of samples by N level both for each condition and in the combined analysis. Across conditions, several ILs showed transgressive performance, outperforming the recurrent parent for traits related to biomass, root morphology, and NUE-related indices. A total of 28 QTLs (22 under LN and 4 under HN) were detected in the greenhouse and 77 (10 under LN and 67 under HN) in hydroponics, with limited overlapping. The differences observed between N levels and growing systems underlined the importance of assessing breeding materials under diverse environments and nutrient regimes to identify both stable and environment-specific beneficial alleles. This study provides the first identification of QTLs for NUE in eggplant, identifying novel loci under specific conditions and showing the significant genotype x environment interactions. These results demonstrated that S. insanum introgressions provide valuable genetic variation for improving plant growth and NUE, delivering both genomic targets and well-characterized ILs. By evaluating these materials across two distinct growing systems, new insights are provided into their performance under varying environmental conditions for the development of eggplant cultivars adapted to reduced N fertilization., This work was supported by the project SOLNUE in the framework of the H2020 call SusCrop-ERA-Net (ID#47), funded by MCIN/AEI/10.13039/501100011033 (PCI2019-103375) and co-funded by the European Union. This work was supported by the project "Boosting functional biodiversity to maximize ecosystem services for Mediterranean crop production-ECOBOOST" [PRIMA_21_00015] part of the PRIMA partnership supported by the European Union H2020. Additional funding was received from the Spanish Ministerio de Ciencia, Innovacion y Universidades (MICIU/AEI/10.13039/501100011033) and by ERDF/EU (grant PID2024-160953OB-I00), and from the Conselleria d'Educacio, Universitats i Ocupacio of the Generalitat Valenciana (grant CIPROM/2022/021). Gloria Villanueva is grateful to Universitat Politecnica de Valencia (UPV) for a post-doctoral grant (PAID-10-24). The authors would like to thank students Francesco Carioti and Mattia Galentino from the University Mediterranea of Reggio Calabria, who, during their Erasmus period at the Universitat Politecnica de Valencia, contributed to the pot greenhouse experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact of Li1.3Al0.3Ti1.7(PO4)3 content and particle size on the electrochemical properties and stability of polymer-based solid electrolytes for lithium batteries

  • Simon, Sonia
  • Ferrer-Nicomedes, Sergio
  • Garcia-Belmonte, Germa
  • Barba-Juan, Antonio
  • Vicente-Agut, Nuria
  • Mormeneo-Segarra, Andrés|||0000-0002-8827-3649
[EN] This work addresses the current limitations of standard composite solid electrolyte membranes through a systematic optimization of the LATP Li1.3Al0.3Ti1.7(PO4)3 wt fraction and rigorous particle size control via selective milling. By precisely integrating these calibrated ceramic particles within a ternary PVDF-HFP/PEO matrix, the resulting configuration establishes a highly balanced framework for advanced lithium-ion battery applications. The optimal composition, designated CSE2H (26 wt% LATP with particle size d50 approximate to 0.875 mu m), exhibits exceptional electrical properties: minimum activation energy (0.138 eV), maximum ionic conductivity (1.12 & sdot;10- 4 S cm- 1 at 30 degrees C and 6.33 & sdot;10- 4 S cm- 1 at 70 degrees C), and stable electrochemical operation within the voltage range 2.5-4.2 V vs. Li+/Li, LFP-cell operating conditions. Electrochemical impedance spectroscopy reveals low interfacial resistance, while chronoamperometry measurements yield a lithium-ion transference number of 0.48, indicating efficient ion transport. Galvanostatic cycling experiments confirm high coulombic efficiency (98%) and good capacity retention: initial capacity of 147 mAh g- 1 LFP at 0.5C stabilizing at 77.58 mAh g- 1 LFP after 200 cycles, with specific discharge capacity of 127.2 mAh g- 1 LFP at 2C. Concurrently, these integrated results establish that this 26 wt% LATP baseline configuration successfully balances interfacial compatibility with competitive electrochemical properties, presenting a highly viable pathway for targeted solidstate battery development., A. B.-J. and G. G.-B. have received funding from Generalitat Valenciana under the Pla Complementari "Programa de Materials Avancats", 2022 (grant number MFA/2022/030) and CIPROM/2024/91. A. B.-J. and N. V.-A. acknowledge the financial support received from projects PID2020-112659RB-I00 and PID2024-158590OB-I00, funded by MICIU/AEI/10.13039/501100011033. N. V.-A. acknowledges support from Universitat Jaume I under project UJI/2023/016. S. F.-N. thank Generalitat Valenciana for the FPI Fellowship Program (grant numbers CIACIF/2021/050). A. M.-S. acknowledge the financial support received from projects PAID-06-25 and PAID-10-24, funded by Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Microwave-Driven Densification of NASICON-type LATP: A Fast Route Toward Efficient Solid-State Electrolytes

  • Mormeneo-Segarra, Andrés|||0000-0002-8827-3649
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Ferrer-Nicomedes, Sergio
  • Vicente-Agut, Nuria
[EN] The transition from flammable liquid electrolytes to safer solid-state electrolytes is essential for next-generation batteries. Li1.3Al0.3Ti1.7(PO4)3 (LATP) is a promising NASICON-type electrolyte, but its application is hindered by energy-intensive high-temperature sintering. This work demonstrates microwave sintering as a rapid and efficient route to fabricate dense, highly conductive LATP. Green bodies with a relative density of 71% were obtained by combined uniaxial and isostatic pressing, followed by microwave sintering between 800 and 1100 ºC for only 10 minutes. Optimal densification (91.4%) was achieved at 1000 ºC, while higher temperatures led to abnormal grain growth and rutile-TiO2 formation. Electrochemical impedance spectroscopy revealed a strong reduction in grain-boundary resistance above 950 ºC. LATP sintered at 1000 ºC exhibited an ionic conductivity of 5·10-4 S cm-1 and an activation energy of 0.20 eV. Symmetric Li|LATP|Li cells showed stable cycling over 500 h with low overpotentials, confirming excellent transport and mechanical integrity., This publication is part of the grants PID2021-128548OB-C21 & C22 and CNS2023-144190 funded by MICIU/AEI/10.13039/501100011033, "ERDF/EU" and the "European Union NextGenerationEU/PRTR". A.M.-S. acknowledges the funding from the Aid for Early Research Projects (PAID-06-25) and the postdoctoral fellowship (PAID-10-24) programs from the Vice-Rectorate for Research of Universitat Politecnica de Valencia. S.F.-N thanks Generalitat Valenciana through FPI Fellowship Program (CIACIF/2021/050) . N. V.-A. acknowledges support for the research from Universitat Jaume I under the project number UJI/2023/016. Authors thank Felipe L. Penaranda-Foix from ITACA facilities for performing the dielectric measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Activation of H2O2, PMS, and PDS over anatase TiO2-supported photocatalysts for efficient pollutant mineralization in water

  • Diego-López, Ander|||0000-0001-5947-9579
  • Tamarit-Mayo, Lorena
  • Bosca Mayans, Francisco
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Cabezuelo, Oscar
[EN] Mineralization efficiency is a key performance descriptor for heterogeneous photocatalysts in the removal of organic pollutants from water. Although the use of radical promoters can enhance the mineralization process, their effectiveness is highly dependent on the nature of the reactive species generated and, in some cases, may even lead to reduced mineralization efficiency. In this work, a supported anatase-TiO2 photocatalyst was used to investigate the mineralization of ortho-phenylphenol (OPP) under UVA irradiation in the presence of three radical promoters: H2O2, peroxymonosulfate (PMS), and peroxydisulfate (PDS). For this purpose, a core@shell SiO2@TiO2 photocatalyst was synthesized and thoroughly characterized to relate its structural and surface properties to its ability to activate these radical promoters. Notably, photocatalytic experiments showed that OPP photodegradation and total organic carbon (TOC) removal were not directly correlated, indicating that fast pollutant degradation does not necessarily imply efficient mineralization. Accordingly, only PMS significantly improved OPP mineralization efficiency of bare SiO2@TiO2, achieving a conversion of ~95¿% within 2¿h. Electron paramagnetic resonance (EPR) experiments revealed the main radicals generated in each system, providing mechanistic insights that were further corroborated by the differing reactivity of the visible-light-responsive ligand-to-metal charge-transfer (LMCT) complexes formed on the SiO2@TiO2 photocatalyst surface. This study provides valuable guidelines for future research on the characterization and design of photocatalytic systems that utilize radical promoters., The authors would like to acknowledge the Spanish Ministry of Science, Innovation, and Universities (PID2023-151872OB-I00, PID2019 110441RB-C33 and TED2021 131952B-I00, funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR). This research was supported by the CLEAN- LAGOON project (PROMETEO/CIPROM622 2024 49). Financial support by the Spanish Ministry of Science and Innovation (CEX2021 001230-S grant funded by MCIN/AEI/10.13039/ 501100011033) is gratefully acknowledged. A. Diego-Lopez and O. Cabezuelo are indebted to the Universitat Politecnica de Valencia for the corresponding Predoctoral FPI fellowship (FPI-UPV/Subprograma 1). L. Tamarit acknowledges Universitat Politecnica de Valencia for her postdoctoral contract (PAID-10-24). The authors would like to acknowledge the Servei de Microscopia Electronica from the Universitat Politecnica de Valencia (UPV) for their support in materials characterization and sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Statistical benchmarking of chloride and sulphate posolytes for all-iron redox flow batteries

  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • C. Escoms-Espert
  • Sáez-Pardo, Fermín|||0009-0000-0759-6781
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Giner-Sanz, Juan José|||0000-0003-0441-6102
[EN] All-iron Redox Flow Batteries (AIRFBs) are promising large-scale energy storage systems due to their low cost and chemical symmetry. However, their performance is largely limited by the slow kinetics of the Fe3+|Fe2+ redox couple in the posolyte, and the posolyte's stability window. A good electrolyte for AIRFBs must combine fast and reversible charge-transfer kinetics, high selectivity toward the Fe3+|Fe2+ reaction, high ionic conductivity, and efficient mass transport. This study systematically investigates how the electrolyte type (chloride and sulphate) and acidity affect the key electrochemical parameters of the Fe3+|Fe2+ redox couple, namely the standard heterogenous rate constant (¿0), the charge transfer coefficient (¿), the diffusion coefficient (¿), and the conductivity (¿). A multifactorial experimental design was employed, and an ANalysis Of VAriance (ANOVA) was used to identify the statistically significant effects of both factors and their interaction on the aforementioned electrochemical parameters. The ANOVA results show a statistically significant difference in the charge-transfer process between chloride- and sulphate-based electrolytes: the electrolyte type primarily controls electron-transfer kinetics, with chloride medium markedly enhancing ¿0; while acid concentration mainly affects ¿ and ¿. Among the tested formulations, 1 M HCl exhibited the best compromise between Fe3+|Fe2+ kinetics, mass transport, and an adequate stability window. These insights provide a quantitative basis for electrolyte optimization and support the rational design of improved AIRFB posolytes., This work was funded by an Ayuda a Primeros Proyectos de Investigacion project (PAID-06 23) of the research vice-rectorate of Universitat Politecnica de Valencia and the Grant PID2023-147511OBC21 funded by MICIU/AEI/10.13039/ 501100011033 997 and by ERDF/EU. M.C.H is grateful to UPV for the post-doctoral grant (PAID10 24). F.S.P. acknowledges the support of Universitat Politecnica de Valencia through a predoctoral fellowship (PAID-01 22). J.J.G.S. is very grateful to the Ministerio de Ciencia e Innovacion, to the Next Generation EU, and to the Agencia Estatal de Investigacion, for their support by a Juan de la Cierva-Incorporacion fellowship (IJC2020-044087-I) funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. The Article Processing Charges (APCs) were covered by the transformative agreements between CRUE Universitat Politecnica de Valencia and Elsevier.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Formulation and characterization of sustainable materials for food packaging: PLA-PHB blends modified with different types of corn oil

  • Barrino, Federico
  • Giuliano, Federica
  • Sempere-Torregrosa, Jaume|||0000-0002-8742-0301
  • Rosa-Ramírez, Harrison de la|||0000-0002-2913-7938
  • Samper, María-Dolores|||0000-0002-5102-8412
[EN] Innovation in sustainable food packaging involves designing advanced bio-based materials that combine performance, biodegradability, and safety of use. In this study, a novel polymer blend based on PLA and PHB was developed, modified with 10 wt% epoxidized corn oil (Eo) and 2,5 wt% maleinized corn oil (Mo), two biofunctionalized additives obtained from renewable resources. This innovative combination was designed to enhance compatibility between polymeric phases, overcoming traditional limitations in fragility, poor processability, and barrier properties. The materials were characterized through FTIR-Fourier Transform Infrared Spectroscopy, contact angle measurements, mechanical tests, optical analyses, water vapor permeability, and suitability tests for food contact with fresh persimmon fruits. The results demonstrate a significant modification of surface chemistry, with an increase in hydrophobicity and improved phase dispersion. The mechanical properties exhibit an optimized balance between stiffness and deformability, which is essential for packaging applications. Furthermore, the transparency and optical properties were found to be stable, making it visually suitable for food packaging. Particularly innovative is the direct application test on persimmons, which highlighted the absence of visible migration or organoleptic alterations, suggesting excellent suitability for direct contact with fresh foods. This research therefore proposes a bioinspired and circular approach, valorizing agricultural by products to formulate functional, biodegradable, and safe materials, in line with European directives for increasingly sustainable packaging., This research was carried out by Dr. Barrino Federico, member of the European Union's Euratom Research and Training Programme (EURA-TOM) Horizon Europe, Grant no. 101061694.H. de la Rosa-Ramirez thanks Universitat Politecnica de Valencia for his post-doctoral Grant PAID-10-24.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Thermal, Biological, and Bioactive Characterization of Sol-Gel Coating Materials for Biomedical Stainless Steel

  • Rosa-Ramírez, Harrison de la|||0000-0002-2913-7938
  • Samper, María-Dolores|||0000-0002-5102-8412
  • Valentino, Caterina
  • Giuliano, Federica
  • Elettra Vaccari, Melania
  • Barrino, Federico
[EN] The development of bioactive hybrid coatings for biomedical implants requires materials exhibiting suitable thermal stability, bioactivity, and biocompatibility. In this study, hybrid organic¿inorganic sol¿gel coatings based on silica (SiO2) and polyethylene glycol (PEG, 24 wt%) were functionalized with different concentrations of caffeic acid (CafA 5, 10, and 15 wt%) and deposited onto AISI 304 and AISI 316 stainless steel substrates by dip-coating without surface pre-treatment. The proposed approach enabled the formation of homogeneous hybrid coatings on untreated stainless steel substrates through a simple and scalable deposition process. A thermal analysis demonstrated the stability of the hybrid network and the effective integration of the organic and inorganic phases. Bioactivity was evaluated by in vitro immersion in simulated body fluid (SBF), while SEM observations revealed the formation of mineral deposits on the coating surface, and an EDX analysis confirmed the presence of calcium and phosphorus within the deposited layer. The formation of crystalline hydroxyapatite (HA) was subsequently confirmed by X-ray diffraction (XRD), confirming that all investigated formulations retained their ability to induce apatite formation after SBF immersion. In addition, in vitro biocompatibility assays confirmed that the developed materials exhibited concentration-dependent cytocompatibility, with the cellular response being influenced by the amount of incorporated CafA. Overall, the results demonstrate that the proposed hybrid materials combine thermal stability, bioactivity, and cytocompatibility, highlighting their potential as bioactive coatings for biomedical applications., This research was funded by MCIN/AEI/ 10.13039/501100011033 through the PID-AEI Project (grant PID2024-157368NB-C33) and ERDF A way of making Europe .