Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 61
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On-chip Fourier-transform spectrometers and machine learning: a new route to smart photonic sensors

  • Herrero-Bermello, A.
  • Li, Jiangfeng
  • Khazaei, Mohammad
  • Grinberg, Yuri
  • Velasco, Aitor V.
  • Vachon, Martin
  • Cheben, Pavel
  • Stankovic, Lina
  • Stankovic,Vladimir
  • Xu, Dan-Xia
  • Schmid, Jens H.
  • Alonso-Ramosa, Carlos
4 pags., 4 figs., 2 tabs., Miniaturized silicon photonics spectrometers capable of detecting specific absorption features have great potential for mass market applications in medicine, environmental monitoring, and hazard detection.However, state-of-the-art silicon spectrometers are limited by fabrication imperfections and environmental conditions, especially temperature variations, since uncontrolled temperature drifts of only 0.1 C distort the retrieved spectrum precluding the detection and classification of the absorption features. Here we present a new strategy that exploits the robustness of machine learning algorithms to signal imperfections, enabling recognition of specific absorption features in a wide range of environmental conditions. We combine onchip spatial heterodyne Fourier-transform spectrometers and supervised learning to classify different input spectra in the presence of fabrication errors, without temperature stabilization or monitoring. We experimentally show the differentiation of four different input spectra under an uncontrolled 10 C range of temperatures, about 100 increase in operational range, with a success rate up to 82.5% using state-of-the-art support vector machines and artificial neural networks., Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (IJCI-2016-30484, RTI2018-097957-B-C33); Comunidad de Madrid (S2018/NMT-4326); Horizon 2020 Framework Programme (Marie Sklodowska-Curie RISE Action 734331); Project MIRSPEC(ANR-17-CE09-0041)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unrepeatered 240-km 64-QAM Transmission Using Distributed Raman Amplification over SMF Fiber

  • Rosa, Pawel
  • Rizzelli, Giuseppe
  • Pang, Xiaodan
  • Ozolins, Oskars
  • Udalcovs, Aleksejs
  • Tan, Mingming
  • Jaworski, M.
  • Marciniak, M.
  • Sergeyev, Sergey
  • Schatz, Richard
  • Jacobsen, G.
  • Popov, S.
  • Ania Castañón, Juan Diego
© 2020 by the authors., We present a theoretical and experimental investigation of unrepeatered transmission over standard single-mode fiber (SMF-28) using several schemes of distributed Raman amplification, including first, second, and dual order. In order to further extend the transmission distance, we utilize advanced bidirectional higher-order ultra-long Raman fiber laser-based amplification, where we use fiber Bragg gratings (FBGs) to reflect Stokes-shifted light from the secondary pumps. Our work demonstrates the possibility of transmission up to 240-km span length with a total span loss of 52.7 dB. Here, we use a 28-Gbaud signal using a 64-quadrature amplitude modulation (QAM) modulation format. Our results highlight the contribution of nonlinear compensation using digital back propagation in a digital signal processor (DSP) code at the receiver., This work was funded by MSCA IF grant SIMFREE (No. 748767), Swedish Research Council (VR) project PHASE (2016-04510), the People Program of the European Union FP7 under grant (608099) and project GRIFFON (324391), Spanish MINECO grant TEC2015-71127-C2 and Spanish MICINN grant RTI2018-097957-B-C33, Comunidad de Madrid grant S2018/NMT-4326 SINFOTON2-CM, Swedish VINNOVA-funded project Center for Software-Defined Optical Networks (no. 2017-01559), and UK EPSRC program grant PHOS (EP/S003436/1)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultra-broadband nanophotonic phase shifter based on subwavelength metamaterial waveguides

  • González-Andrade, D.
  • Luque-González, José Manuel
  • Wangüemert-Pérez, J. G.
  • Ortega-Moñux, Alejandro
  • Cheben, Pavel
  • Molina-Fernández, Iñigo
  • Velasco, Aitor V.
9 pags., 7 figs., 1 tab., Optical phase shifters are extensively used in integrated optics not only fortelecom and datacom applications but also for sensors and quantum computing. While various active solutions have been demonstrated, progress in passive phase shifters is still lacking. Here we present a new type of ultra-broadband 90° phase shifter, which exploits the anisotropy and dispersion engineering in subwavelength metamaterial waveguides. Our Floquet– Bloch calculations predict a phase-shift error below 1.7° over an unprecedented operation range from 1.35 to 1.75 μm, i.e., 400 nm bandwidth covering the E, S, C, L, and U telecommunication bands. The flat spectral response of our phase shifter is maintained even in the presence of fabrication errors up to 20 nm, showing greater robustness than conventional structures. Our device was experimentally demonstrated using standard 220 nm thick SOI wafers, showing a fourfold reduction in the phase variation compared to conventional phase shifters within the 145 nm wavelength range of our measurement setup. The proposed subwavelength engineered phaseshifterpaves thewayfornovel photonic integrated circuits withanultra-broadband performance. ©2020 Chinese Laser Press, Spanish Ministry of Science, Innovation and Universities (MICINN) (IJCI-2016-30484, RTI2018-097957B-C33, TEC2015-71127-C2-1-R with FPI Scholarship BES2016-077798, TEC2016-80718-R, Alcyon Photonics S.L. Through CDTI SNEO-20181232); Spanish Ministry of Education, Culture and Sport (MECD) (FPU16/06762); Community of Madrid - FEDER Funds (S2018/NMT-4326); Horizon 2020 Research and Innovation Program (Marie Sklodowska-Curie 734331)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultra-wideband dual-polarization silicon nitride power splitter based on modal engineered slot waveguides

  • González-Andrade, D.
  • Guerber, Sylvain
  • Durán-Valdeiglesias, Elena
  • Pérez-Galacho, Diego
  • Le Roux, Xavier
  • Vulliet, Nathalie
  • Cremer, Sébastien
  • Monfray, Stephane
  • Cassan, Eric
  • Marris-Morini, Delphine
  • Boeuf, Frédéric
  • Cheben, Pavel
  • Vivien, Laurent
  • Velasco, Aitor V.
  • Alonso-Ramos, Carlos
4 pags., 4 figs., 1 tab., Silicon nitride (SiN) waveguides provide a substantially lower index contrast, thermo-optic coefficient, and reduced birefringence compared to silicon-on-insulator waveguides. These properties make SiN a prominent candidate for implementation of ultra-wideband dual-polarization photonics circuits with a great potential for datacom applications. State-of-the-art SiN power splitters are still hampered in terms of either bandwidth or single-polarization operation. Here, we propose to overcome these limitations by exploiting modal and waveguide symmetry engineering in a single-mode slot waveguide. This topology prevents mode-beating, while granting symmetric power splitting for both polarizations. Experimental characterization of the fabricated device shows low loss (<0.62dB) and imbalance (<0.6dB) within an unprecedented bandwidth of 420 nm (1.26–1.68 µm)., Spanish Ministry of Science, Innovation and Universities (MICINN) (IJCI-2016-30484, RTI2018- 097957-B-C33, TEC2015-71127-C2-1-R with FPI scholarship BES-2016-077798); Comunidad de Madrid - FEDER funds (S2018/NMT-4326); Horizon 2020 Framework Programme (Marie Sklodowska-Curie 734331); H2020 European Research Council (ERC POPSTAR 647342); European Commission (H2020-ICT-26127-2017 COSMICC 688516); French Industry Ministry (Nano2022 project under IPCEI program); Agence Nationale de la Recherche (ANR-MIRSPEC-17-CE09-0041)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Experimental demonstration of a broadband mode converter and multiplexer based on subwavelength grating waveguides

  • González-Andrade, D.
  • Dias, A.
  • Wangüemert-Pérez, J. G.
  • Ortega-Moñux, Alejandro
  • Molina-Fernández, Iñigo
  • Halir, Robert
  • Cheben, Pavel
  • Velasco, Aitor V.
5 pags., 4 figs., 2 tabs., Mode-division multiplexing is a promising solution to enhance the capacity of current photonic integrated circuits and thereby meet the growing demands of telecom and datacom applications. Here, we experimentally demonstrate for the first time, to the best of our knowledge, a compact and broadband mode converter and multiplexer based on a subwavelength engineered multimode interference coupler. Our device was fabricated on a standard 220-nm-thick silicon-on-insulator platform with a small footprint of 38.6 ⨯ 3.7 µm2. Experimental results for a complete back-to-back multiplexer-demultiplexer link show an insertion loss <1.1 dB (0.55 dB per device) and crosstalk better than −18 dB for both TE0 and TE1 modes in a 120 nm bandwidth (1.52–1.64 µm)., This work has been funded in part by the Spanish Ministry of Science, Innovation and Universities (MICINN) under grants CDTI SNEO-20181232 (Alcyon Photonics S.L.), TEC2015-71127-C2-1-R (FPI scholarship BES-2016-077798), TEC2016-80718-R, IJCI-2016-30484 and RTI2018-097957-B-C33; and the Community of Madrid - FEDER funds (S2018/NMT-4326). This project has received funding from the Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant No. 734331., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards Distributed Measurements of Electric Fields Using Optical Fibers: Proposal and Proof-Of-Concept Experiment

  • Magalhães, Regina
  • Pereira, Joao
  • Tarasenko, Oleksandr
  • Martín-López, Sonia
  • González-Herráez, Miguel
  • Margulis, Walter
  • Martins, Hugo F.
© 2020 by the authors., Nowadays there is an increasing demand for the cost-effective monitoring of potential threats to the integrity of high-voltage networks and electric power infrastructures. Optical fiber sensors are a particularly interesting solution for applications in these environments, due to their low cost and positive intrinsic features, including small size and weight, dielectric properties, and invulnerability to electromagnetic interference (EMI). However, due precisely to their intrinsic EMI-immune nature, the development of a distributed optical fiber sensing solution for the detection of partial discharges and external electrical fields is in principle very challenging. Here, we propose a method to exploit the third-order and second-order nonlinear effects in silica fibers, as a means to achieve highly sensitive distributed measurements of external electrical fields in real time. By monitoring the electric-field-induced variations in the refractive index using a highly sensitive Rayleigh-based CP-φOTDR scheme, we demonstrate the distributed detection of Kerr and Pockels electro-optic effects, and how those can assign a new sensing dimension to optical fibers, transducing external electric fields into visible minute disturbances in the guided light. The proposed sensing configuration, electro-optical time domain reflectometry, is validated both theoretically and experimentally, showing experimental second-order and third-order nonlinear coefficients, respectively, of χ(2) ~ 0.27 × 10−12 m/V and χ(3) ~ 2.5 × 10−22 m2/V2 for silica fibers., This work was partly supported by: the European Commission (FINESSE, MSCA-ITN-ETN-722509); Spanish Ministerio de Ciencia, Innovación y Universidades (RTI2018-097957-B-C31, RTI2018-097957-B-C33); Comunidad de Madrid and FEDER program (SINFOTON2-CM: P2018/NMT-4326); the European Research Council (OCEAN-DAS: ERC-2019-POC-875302). The work of HFM was supported by the Spanish MINECO (“Juan de la Cierva” postdoc contract IJCI-2017-33856)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Distributed acoustic sensing for seismic activity monitoring

  • Fernández-Ruiz, María R.
  • Soto, Marcelo A.
  • Williams, Ethan F.
  • Martín-López, Sonia
  • Zhan, Zhongwen
  • González-Herráez, Miguel
  • Martins, Hugo F.
17 pags., 12 figs., Continuous, real-time monitoring of surface seismic activity around the globe is of great interest for acquiring new insight into global tomography analyses and for recognition of seismic patterns leading to potentially hazardous situations. The already-existing telecommunication fiber optic network arises as an ideal solution for this application, owing to its ubiquity and the capacity of optical fibers to perform distributed, highly sensitive monitoring of vibrations at relatively low cost (ultra-high density of point sensors available with minimal deployment of new equipment). This perspective article discusses early approaches on the application of fiber-optic distributed acoustic sensors (DASs) for seismic activity monitoring. The benefits and potential impact of DAS technology in these kinds of applications are here illustrated with new experimental results on teleseism monitoring based on a specific approach: the so-called chirped-pulse DAS. This technology offers promising prospects for the field of seismic tomography due to its appealing properties in terms of simplicity, consistent sensitivity across sensing channels, and robustness. Furthermore, we also report on several signal processing techniques readily applicable to chirped-pulse DAS recordings for extracting relevant seismic information from ambient acoustic noise. The outcome presented here may serve as a foundation for a novel conception for ubiquitous seismic monitoring with minimal investment., This work was supported by the project FINESSE, Grant No. MSCA-ITN-ETN-722509; the DOMINO Water JPI project under the WaterWorks2014 cofounded call by EC Horizon 2020 and Spanish MINECO; the Comunidad de Madrid and FEDER Program under Grant No. SINFOTON2-CM: P2018/NMT-4326; the Spanish Government under Project Nos. TEC2015-71127-C2-2-R, RTI2018- 097957-B-C31, and RTI2018-097957-B-C33. M.R.F.M. and H.F.M. acknowledge financial support from the Spanish MICINN under Contract Nos. FJCI-2016-27881 and IJCI-2017-33856, respectively. M.A.S. acknowledges AC3E Basal Project No. FB0008 and thanks “Becas Iberoamérica Santander Universidades Convocatoria 2018” for supporting his research stay at the Universidad de Alcalá, Spain.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Experimental demonstration of metamaterial anisotropy engineering for broadband on-chip polarization beam splitting

  • Herrero-Bermello, A.
  • Dias, A.
  • Luque-González, José Manuel
  • Ortega-Moñux, Alejandro
  • Velasco, Aitor V.
  • Cheben, Pavel
  • Halir, Robert
9 pags., 4 figs., 1 tab., Subwavelength metamaterials exhibit a strong anisotropy that can be leveraged to implement high-performance polarization handling devices in silicon-on-insulator. Whereas these devices benefit from single-etch step fabrication, many of them require small feature sizes or specialized cladding materials. The anisotropic response of subwavelength metamaterials can be further engineered by tilting its constituent elements away from the optical axis, providing an additional degree of freedom in the design. In this work, we demonstrate this feature through the design, fabrication and experimental characterization of a robust multimode interference polarization beam splitter based on tilted subwavelength gratings. A 110-nm minimum feature size and a standard silicon dioxide cladding are maintained. The resulting device exhibits insertion loss as low as 1 dB, an extinction ratio better than 13 dB in a 120-nm bandwidth, and robust tolerances to fabrication deviations., Junta de Andalucía (UMA18-FEDERJA-219); Ministerio de Ciencia, Innovación y Universidades (FPU16/06762, IJCI-2016-30484, RTI2018-097957-B-C33, TEC2016-80718-R); Comunidad de Madrid (S2018/NMT-4326); Horizon 2020 Framework Programme (Marie Sklodowska-Curie RISE Action 734331); Universidad de Málaga; Alcyon Photonics S.L. (NEOTEC-CDTISNEO20181232)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Long-range distributed solar irradiance sensing using optical fibers

  • Magalhães, Regina
  • Costa, Luis
  • Martín-López, Sonia
  • González-Herráez, Miguel
  • Braña, Alejandro F.
  • Martins, Hugo F.
15 pags., 9 figs., Until recently, the amount of solar irradiance reaching the Earth surface was considered to be a steady value over the years. However, there is increasing observational evidence showing that this quantity undergoes substantial variations over time, which need to be addressed in different scenarios ranging from climate change to solar energy applications. With the growing interest in developing solar energy technology with enhanced efficiency and optimized management, the monitoring of solar irradiance at the ground level is now considered to be a fundamental input in the pursuit of that goal. Here, we propose the first fiber-based distributed sensor able of monitoring ground solar irradiance in real time, with meter scale spatial resolutions over distances of several tens of kilometers (up to 100 km). The technique is based on an optical fiber reflectometry technique (CP-φOTDR), which enables real time and long-range high-sensitivity bolometric measurements of solar radiance with a single optical fiber cable and a single interrogator unit. The method is explained and analyzed theoretically. A validation of the method is proposed using a solar simulator irradiating standard optical fibers, where we demonstrate the ability to detect and quantify solar irradiance with less than a 0.1 W/m resolution., This research was funded in part by: the European Commission (FINESSE, MSCA-ITN-ETN-722509; Ocean-DAS 875302); Ministerio de Ciencia, Innovación y Universidades (IJCI-2017-33856, RTI2018-097957-B-C31, RTI2018-097957-B-C33); Comunidad de Madrid and FEDER program (SINFOTON2-CM: P2018/NMT-4326
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Anomalous relative intensity noise transfer in ultralong random fiber lasers

  • Rota-Rodrigo, S.
  • Rizzelli, Giuseppe
  • Leandro, D.
  • Nuño, J.
  • López-Amo, Manuel
  • Santarelli, G.
  • Ania Castañón, Juan Diego
9 pags., 7 figs., 1 tab., We present, for the first time, an experimental demonstration of RIN noise transfer dampening at low frequencies in random distributed feedback ultralong Raman fibre lasers based on conventional telecommunication fibres. Furthermore, we present a thorough theoretical description of the phenomenon and demonstrate how our model can be used to predict the observed behaviour, identifying the general requirements for system improvement through RIN transfer reduction., Comunidad de Madrid (AEI/FEDER funds TALENTO-CM 2017-T2/TIC-5227, SINFOTON2- CM (S2018-NMT/4326)); Horizon 2020 Framework Programme (Marie Sklodowska-Curie—748839); LAPHIA (Lasers and Photonics in Aquitaine); Conseil Régional d’Aquitaine (2017-1R50302- 00013493); Universidad de Alcalá (CCG19/IA-051); Spanish Government (PID2019-107270RBC22, RTI2018-RTI2018-097957-B-C33).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Detection of nitrous oxide using infrared optical plasmonics coupled with carbon nanotubes

  • Allsop, Thomas D.P.
  • Al Araimi, M.
  • Neal, R.
  • Wang, C.
  • Culverhouse, P.
  • Ania Castañón, Juan Diego
  • Webb, D.J.
  • Davey, Paul
  • Gilbert, J.M.
  • Rozhin, A.
12 pags., 7 figs., 1 tab., Interest in gas sensing using functionalised carbon nanotubes is a major area of research that utilises changes in their electrical properties induced by the reaction with a specific gas. This paper describes specific gas sensing on an optical platform consisting of a 2-dimensional nano-structured plasmonic array of nano-antennae/nanowires, with topological dimensions of mean radius of 130 nm, typical length of 20 μm and a period of 500 nm. The array is created by the spatial compaction of germanium oxides when the material interacts with ultra-violet irradiance, it can support infra-red localised surface plasmons. Carbon nanotubes are deposited upon the surface of the plasmonic platform followed by the application of the polyethyleneimine polymer. The resulting nanomaterials-photonic platform gives rise to the selective response to nitrous oxide gases, which are a major contributor to atmospheric degradation. We achieve the device sensitivity up to 100% atmosphere of nitrous oxide with a detection limit of 109 ppm, a maxiumum response time of nineteen seconds and yielding a full-scale deflection of +5.7 nm. This work demonstrates that the optical properties of specific carbon nanotubes can be used in a wide range of sensing applications offering a new sensing paradigm., This work was nancially supported by joint grants EP/J010413 and EP/J010391 for Aston University and the University of Plymouth along with the University of Hull prosperity partnership: EP/R004900/1 from the UK Engineering and Physical Sciences Research Council and Marie Skłodowska-Curie COFUND Action MULTIPLY (project 713694), Spanish MICINN Grant ECOSYSTEM (RTI2018-097957-B-C33) and Comunidad de Madrid SINFOTON2-CM (S2018/NMT-4326). M. A. acknowledges the support from the Ministry of Higher Education, Sultanate of Oman. A. R. acknowledges the Royal Academy of Engineering/ Leverhulme Trust Senior Research Fellowships (LTSRF1617/13/ 57) and EU Horizon 2020 Research and Innovation Staff Exchange Programme (RISE) under Marie Sklodowska-Curie Action (project 690945 “Carther”). Furthermore, we like to thank Prof V. Yukhymchuk and Mr O. Hreshchuk for providing the Raman measurements undertaken at the Department of Optics and Spectroscopy, National Academy of Sciences of Ukraine, Kiev at the Department of Optics and Spectroscopy, National Academy of Sciences of Ukraine, Kiev.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The IST spectral portraits of the first order doubly periodic solutions of the nonlinear Schrödinger equation

  • Akhmediev, N.
  • Soto Crespo, J. M.
8 pags., 8 figs., The spectra of the inverse scattering technique (IST) play a crucial role in the physics of nonlinear phenomena. They define the long term evolution of dynamical systems. We present the IST spectral portraits for the extensive three-parameter families of the first order doubly periodic solutions of the nonlinear Schrödinger equation that cover a wide range of physical phenomena such as modulation instability, rogue waves and many other problems with periodic boundary conditions. We relate these spectral portraits with the parameters of the family. We show that there are two qualitatively different types of spectral portraits. A-type spectra consist of two continuous bands: a band of purely imaginary eigenvalues within the interval [-i, i] and a finite band of complex eigenvalues. On the contrary, B-type spectra possess only continuous bands of imaginary eigenvalues all located within the interval [-i, i] and separated by a finite band gap. A physical interpretation of these results is given., The work of JMSC is funded by Spanish MICINN grant RTI2018-097957-B-C33, and Comunidad de Madrid grant S2018-NMT/4326 SINFOTON2-CM
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Y-junction power splitter engineered through subwavelength metamaterials

  • Fernández de Cabo, Raquel
  • González-Andrade, D.
  • Velasco, Aitor V.
2020 IEEE Photonics Conference (IPC), Vancouver, BC, Canada, 28 Sept.-1 Oct. 2020, We present a Y-junction beam-splitter based on subwavelength metamaterials that mitigates losses associated with the fabrication limitations in the tip size of conventional Y-junctions. Simulations show minimal losses under 0.5 dB for TE 0 and TE 1 modes in a 300 nm range (1300 - 1600 nm)., This work has been funded in part by the Spanish Ministry of Science, Innovation and Universities (MICINN) under grants RTI2018-097957-B-C33 and TEC2015- 71127-C2-1-R (FPI BES-2016-077798) and the Community of Madrid – FEDER funds (S2018/NMT-4326). This project has received funding from the Horizon 2020 research and innovation program under Marie Sklodowska-Curie grant No. 734331.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Dispersion-engineered nanophotonic devices based on subwavelength metamaterial waveguides

  • González-Andrade, D.
  • Dias, A.
  • Luque-González, José Manuel
  • Wangüemert-Pérez, J.G.
  • Ortega-Moñux, A.
  • Halir, R.
  • Molina-Fernández, Iñigo
  • Cheben, Pavel
  • Velasco, Aitor V.
2020 IEEE Photonics Conference (IPC), Vancouver, BC, Canada, 28 Sept.-1 Oct. 2020, Subwavelength metamaterial waveguides are becoming an essential tool for the design of high-performance nanophotonic devices implemented on the silicon-on-insulator platform. Here we focus on dispersion engineering and present our latest advances in this field, including mode multiplexers/demultiplexers and passive phase shifters with ultra-broad bandwidths., This work has been funded in part by the Spanish Ministry of Science, Innovation and Universities (MICINN) under grants CDTI SNEO-20181232 (Alcyon Photonics S.L.), TEC2015-71127-C2-1-R (FPI scholarship BES-2016- 077798), TEC2016-80718-R, and RTI2018-097957-B-C33; the Spanish Ministry of Education, Culture and Sport (MECD) (FPU16/06762); and the Community of Madrid – FEDER funds (S2018/NMT-4326). This project has received funding from the Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant No. 734331.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A broadband polarization splitter directional coupler based on tilted subwavelengh grating metamaterials

  • Luque-González, José Manuel
  • Herrero-Bermello, A.
  • Ortega-Moñux, Alejandro
  • Sánchez-Rodríguez, Marina
  • Velasco, Aitor V.
  • Schmid, Jens H.
  • Cheben, Pavel
  • Molina-Fernández, Iñigo
  • Halir, Robert
IEEE Photonics Conference (IPC), Vancouver, BC, Canada, 28 Sept.-1 Oct. 2020, Tilted subwavelength gratings (SWG) allows anisotropy tailorable metamaterials with applications in polarization management. Based on this concept, here we experimentally demonstrate a broadband directional-coupler-based polarization beam splitter with sub-decibel insertion loss in a 100 nm bandwidth., Universidad de Málaga; Ministerio de Economía y Competitividad (MINECO) (TEC2016-80718-R); Ministerio de Educación, Cultura y Deporte (MECD) (FPU16/06762), Fondo Europeo de Desarrollo Regional—FEDER, Proyecto I+D+i en el marco del Programa Operativo FEDER Andalucía 2014-2020 (UMA18-FEDERJA-219), Spanish Ministry of Science, Innovation and Universities (MICINN) under grants CDTI SNEO-20181232 (Alcyon Photonics S.L.) and RTI2018-097957-B-C33; Community of Madrid – FEDER funds (S2018/NMT-4326); Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant No. 734331.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Silicon Subwavelength Structures: Practical Metamaterials for Communications and Sensing

  • Halir, R.
  • Herrero-Bermello, A.
  • Luque-González, J.M.
  • González-Andrade, D.
  • Leuermann, J.
  • Sánchez-Postigo, A.
  • Hadij-El-Houati, Abdelfettah
  • Pereira-Martín, D.
  • Oliva-Rubio, José de
  • Wangüemert-Pérez, J.G.
  • Ortega-Moñux, A.
  • Schmid, Jens H.
  • Velasco, Aitor V.
  • Dias, A.
  • Čtyroký, Jiří
  • Nedeljkovic, M.
  • Mashanovich, Goran Z.
  • Cheben, Pavel
  • Molina-Pérez, Í
OSA Advanced Photonics Congress ¿ Integrated Photonics Research, Silicon and Nanophotonics, Washington, DC United States, 13–16 July 2020, In this invited talk we review the latest advances in the surging field of photonic subwavelength metamaterials. These structures can provide enhanced, device-specific material properties and find widespread application in silicon photonics, We acknowledge funding through Universidad de Málaga, Ministerio de Economía y Competitividad (TEC2016- 80718-R, CDTI SNEO-20181232, RTI2018-097957-B-C33), Ministerio de Educación, Cultura y Deporte (FPU16/06762, FPU16/03401, FPU17/00638), Proyecto I+D+i en el marco del Programa Operativo FEDER Andalucía 2014-2020 (UMA18-FEDERJA-219), Czech Science Foundation (Project 190062S), Alcyon Photonics (8.06/5.59.5045), the Community of Madrid – FEDER funds (S2018/NMT-4326), the Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant No. 734331
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Time-expanded phase-sensitive optical time-domain reflectometry

  • Soriano-Amat, Miguel
  • Martins, Hugo F.
  • Duran, V.
  • Costa, Luis
  • Martín-López, Sonia
  • González-Herráez, Miguel
  • Fernández-Ruiz, María R.
12 pags., 6 figs., 1 tab., Phase-sensitive optical time-domain reflectometry (ΦOTDR) is a well-established technique that provides spatio-temporal measurements of an environmental variable in real time. This unique capability is being leveraged in an ever-increasing number of applications, from energy transportation or civil security to seismology. To date, a wide number of different approaches have been implemented, providing a plethora of options in terms of performance (resolution, acquisition bandwidth, sensitivity or range). However, to achieve high spatial resolutions, detection bandwidths in the GHz range are typically required, substantially increasing the system cost and complexity. Here, we present a novel ΦOTDR approach that allows a customized time expansion of the received optical traces. Hence, the presented technique reaches cm-scale spatial resolutions over 1 km while requiring a remarkably low detection bandwidth in the MHz regime. This approach relies on the use of dual-comb spectrometry to interrogate the fibre and sample the backscattered light. Random phase-spectral coding is applied to the employed combs to maximize the signal-to-noise ratio of the sensing scheme. A comparison of the proposed method with alternative approaches aimed at similar operation features is provided, along with a thorough analysis of the new trade-offs. Our results demonstrate a radically novel high-resolution ΦOTDR scheme, which could promote new applications in metrology, borehole monitoring or aerospace., Comunidad de Madrid and FEDER Program under grant SINFOTON2-CM: P2018/NMT-4326, Generalitat Valenciana under grant PROMETEO/2020/029, the European Research Council (OCEAN-DAS: ERC-2019-POC-875302), the Spanish Government under projects RTI2018–097957-B-C31, RTI2018–097957- B-C32, and RTI2018–097957-B-C33, and Universitat Jaume I under project UJIB2019–45. M.S.A., H.F.M., V.D., and M.R.F.R. acknowledge financial support from the Spanish MICINN under contract no. PRE-2019–08744
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-performance on-chip silicon beamsplitter based on subwavelength metamaterials for enhanced fabrication tolerance

  • Fernández de Cabo, Raquel
  • González-Andrade, D.
  • Cheben, Pavel
  • Velasco, Aitor V.
11 pags., 7 figs., 2 tabs. -- This article belongs to the Special Issue Silicon Photonics: Synthesis and Applications, Efficient power splitting is a fundamental functionality in silicon photonic integrated circuits, but state-of-the-art power-division architectures are hampered by limited operational bandwidth, high sensitivity to fabrication errors or large footprints. In particular, traditional Y-junction power splitters suffer from fundamental mode losses due to limited fabrication resolution near the junction tip. In order to circumvent this limitation, we propose a new type of high-performance Y-junction power splitter that incorporates subwavelength metamaterials. Full three-dimensional simulations show a fundamental mode excess loss below 0.1 dB in an ultra-broad bandwidth of 300 nm (1400–1700 nm) when optimized for a fabrication resolution of 50 nm, and under 0.3 dB in a 350 nm extended bandwidth (1350–1700 nm) for a 100 nm resolution. Moreover, analysis of fabrication tolerances shows robust operation for the fundamental mode to etching errors up to ±20 nm. A proof-of-concept device provides an initial validation of its operation principle, showing experimental excess losses lower than 0.2 dB in a 195 nm bandwidth for the best-case resolution scenario (i.e., 50 nm)., This work has been funded in part by the Spanish Ministry of Science and Innovation (MICINN) under grants RTI2018-097957-B-C33, RED2018-102768-T and TEC2015-71127-C2-1-R (FPI BES-2016-077798) and the Community of Madrid—FEDER funds (S2018/NMT-4326). This project has received funding from the Horizon 2020 research and innovation program under Marie SklodowskaCurie grant No. 734331., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A multi-poosition approach in a smart fiber-optic surveillance system for pipeline integrity threat detection

  • Tejedor, Javier
  • Macías-Guarasa, Javier
  • Martins, Hugo F.
  • Martín-López, Sonia
  • González-Herráez, Miguel
19 pags., 4 figs., 9 tabs. -- This article belongs to the Special Issue Pattern Recognition and Applications, We present a new pipeline integrity surveillance system for long gas pipeline threat detection and classification. The system is based on distributed acoustic sensing with phase-sensitive optical time domain reflectometry (ϕ-OTDR) and pattern recognition for event classification. The proposal incorporates a multi-position approach in a Gaussian Mixture Model (GMM)-based pattern classification system which operates in a real-field scenario with a thorough experimental procedure. The objective is exploiting the availability of vibration-related data at positions nearby the one actually producing the main disturbance to improve the robustness of the trained models. The system integrates two classification tasks: (1) machine + activity identification, which identifies the machine that is working over the pipeline along with the activity being carried out, and (2) threat detection, which aims to detect suspicious threats for the pipeline integrity (independently of the activity being carried out). For the machine + activity identification mode, the multi-position approach for model training obtains better performance than the previously presented single-position approach for activities that show consistent behavior and high energy (between 6% and 11% absolute) with an overall increase of 3% absolute in the classification accuracy. For the threat detection mode, the proposed approach gets an 8% absolute reduction in the false alarm rate with an overall increase of 4.5% absolute in the classification accuracy., This research was funded by a private research project by Fluxys, Gassco and Statoil named “PIT-STOP (Early detection of Pipeline Integrity Threats using a SmarT fiber-OPtic surveillance system)”, by the Spanish Ministry of Economy and Competitiveness under projects HEIMDALUAH (TIN2016-75982-C2-1-R) and ARTEMISA (TIN2016-80939-R), by the University of Alcalá under projects ACUFANO (CCG19/IA-024) and ARGOS (CCG20/IA-043), and by the Spanish Ministry of Science, Innovation and Universities (IJCI-2017-33856 and RTI2018-097957-B-C33). The APC was funded by the Ministry of Science, Innovation and Universities of Spain grant number RTI2018-095324-B-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ground vibrations recorded by fiber-optic cables reveal traffic response to COVID-19 lockdown measures in Pasadena, California

  • Wang, Xin
  • Zhan, Zhongwen
  • Williams, Ethan F.
  • González-Herráez, Miguel
  • Martins, Hugo F.
  • Karrenbach, M.
9 pags., 5 figs., The COVID-19 lockdown has unprecedently affected the dynamics of our society. As traffic flow is a good proxy for societal activity, traffic monitoring becomes a useful tool to assess the lockdown’s impacts. Here we turned two strands of unused telecommunication fibers in Pasadena, California into a seismic array of ~5,000 sensors and detected ground vibrations caused by moving vehicles along the streets above the cable. We monitor the number of vehicles and their mean speed between December 2019 and August 2020 in high spatial and temporal resolution, and then analyze the traffic patterns change due to the COVID-19 lockdown. Our results show a city-wide decline in traffic volume and an increase in speed due to the lockdown, although the level of impact varies substantially by streets. This study demonstrates the feasibility of using telecommunication fiber optic cables in traffic monitoring, which has implications for public health, economy, and transportation safety, We thank the City of Pasadena for contributing its fiber optic cables to our research. The DAS instruments used in this study were provided by the OptaSense, University of Alcala, and Aragon Photonics. This work is supported by NSF CAREER award #1848166; the Young Elite Scientists Sponsorship Program by CAST (grant 2020QNRC001); the Key Research Program of the Institute of Geology & Geophysics, CAS (grant IGGCAS-201904); the Spanish MICINN (RTI2018-097957-B-C31, RTI2018-097957-B-C33); the European Research Council (OCEAN-DAS: ERC-2019-POC-875302). The work of HFM was supported by MINECO (“Juan de la Cierva” postdoc contract IJCI-2017-33856)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Noise Levels and Signals Observed on Submarine Fibers in the Canary Islands Using DAS

  • Ugalde, Arantza
  • Becerril, Carlos
  • Villaseñor, Antonio
  • Ranero, César R.
  • Fernández-Ruiz, María R.
  • Martín-López, Sonia
  • González-Herráez, Miguel
  • Martins, Hugo F.
13 pages, 10 figures, supplemental material https://doi.org/10.1785/0220210049.-- Data and resources: CANALINK-Canarias submarine link S.L. (http://www.canalink.tel/; last accessed February 2021) provided the information on the cable structure. EMODnet Bathymetry Consortium (2020) provided bathymetric data.-- This is a contribution of the Barcelona Center for Subsurface Imaging that is a Grup de Recerca de la Generalitat de Catalunya, In this study, we investigate 70 days of distributed acoustic sensing (DAS) recordings in the Canary Islands using an undersea fiber‐optic telecommunication cable that links the islands of Tenerife and Gran Canaria. Two DAS interrogators connected to both ends of the cable turned the fiber into an array of 11,968 strain sensors covering a total length of ∼120 km. We present the details of the experiment, noise analysis, and examples of recorded signals. Seismic ambient noise levels assessment indicates poor local coupling of the cable due to the irregular bathymetry that results in high‐amplitude acoustic oscillations in some channels. The DAS array recorded several types of nonseismic (vehicles, surface gravity waves, ships) and seismic signals. Local and regional earthquakes were detected with magnitudes mbLg≥2⁠. Surface waves from teleseismic events at a distance of ∼3000 km were also identified in the strain recordings. Here, we report the first observations with DAS of hydroacoustic T waves generated by oceanic earthquakes located at the Central Mid‐Atlantic Ridge and the Cape St. Vincent region. Events had magnitudes from Mw 4.2 to 6.9, and the hydroacoustic waves were recorded at epicentral distances from 780 to 3400 km. Our findings show that submarine fiber‐optic cables can effectively be used to assess the seismic activity in remote oceanic areas, With funding from the Spanish government through the “Severo Ochoa Centre of Excellence” accreditation (CEX2019-000928-S), Comunidad de Madrid and FEDER Program under grant SINFOTON2-CM:P2018/NMT-4326, the European Research Council (OCEAN-DAS: ERC-2019-POC-875302), the Spanish Government under projects RTI2018-097957-B-C31, and RTI2018-097957-B-C33. M.R.F.R. and H.F.M. acknowledge financial support from the Spanish MICINN under contract no. IJC2018-035684-I, and IJCI-2017-33856, respectively, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Broadband Fourier-transform silicon nitride spectrometer with wide-area multiaperture input

  • González-Andrade, D.
  • Dinh, T.T.D.
  • Guerber, Sylvain
  • Vulliet, Nathalie
  • Cremer, Sébastien
  • Monfray, Stephane
  • Cassan, Eric
  • Marris-Morini, Delphine
  • Boeuf, Frédéric
  • Cheben, Pavel
  • Vivien, Laurent
  • Velasco, Aitor V.
  • Alonso-Ramos, Carlos
4 pags., 5 figs., Integrated microspectrometers implemented in silicon photonic chips have gathered a great interest for diverse applications such as biological analysis, environmental monitoring, and remote sensing. These applications often demand high spectral resolution, broad operational bandwidth, and large optical throughput. Spatial heterodyne Fourier-transform (SHFT) spectrometers have been proposed to overcome the limited optical throughput of dispersive and speckle-based on-chip spectrometers. However, state-of-the-art SHFT spectrometers in near-infrared achieve large optical throughput only within a narrow operational bandwidth. Here we demonstrate for the first time, to the best of our knowledge, a broadband silicon nitride SHFT spectrometer with the largest light collecting multiaperture input (320 × 410 µm) ever implemented in an SHFT on-chip spectrometer. The device was fabricated using 248 nm deep-ultraviolet lithography, exhibiting over 13 dB of optical throughput improvement compared to a single-aperture device. The measured resolution varies between 29 and 49 pm within the 1260-1600 nm wavelength range., Spanish Ministry of Science and Innovation (MICINN) (RED2018-102768-T, RTI2018-097957-B-C33, TEC2015-71127-C2-1-R (FPI Scholarship BES-2016-077798)); Community of Madrid-FEDER funds (S2018/NMT-4326); Horizon 2020 Research and Innovation Program (Marie Sklodowska-Curie 734331); H2020 European Research Council (ERC POPSTAR 647342); European Commission (H2020- ICT-26127-2017 COSMICC 688516); French Industry Ministry (Nano2022 project under IPCEI program); Agence Nationale de la Recherche (ANR-MIRSPEC-17-CE09-0041
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mode Converter and Multiplexer with a Subwavelength Phase Shifter for Extended Broadband Operation

  • González-Andrade, D.
  • Fernández de Cabo, Raquel
  • Vilas, Jaime
  • Olivares, Irene
  • Dias, A.
  • Luque-González, José Manuel
  • Wangüemert-Pérez, J.G.
  • Ortega-Moñux, Alejandro
  • Molina-Fernández, Iñigo
  • Halir, Robert
  • Cheben, Pavel
  • Velasco, Aitor V.
4 pags., 3 figs., 1 tab., On-chip mode converters and multiplexers are fundamental components to scale the capacity of silicon optical interconnects by using different spatial modes of waveguides. Recently, we proposed a low loss and compact mode converter and multiplexer consisting of a subwavelength-engineered multimode interference coupler, tapered waveguides as phase shifter and a symmetric Y-junction. However, the narrow spectral response of the tapered phase shifter limited the device crosstalk performance. In this work, we demonstrate that the use of a subwavelength grating phase shifter with low phase-shift errors substantially reduces the crosstalk and expands the operational bandwidth. A complete multiplexer-demultiplexer link consisting of two devices in back-to-back configuration was fabricated in a 220-nm silicon-on-insulator platform. Experimental measurements of the complete link show insertion loss below 2 dB and crosstalk less than -17 dB over a bandwidth of 245 nm (1427 - 1672 nm)., is work was supported in part by the Spanish Ministry of Science and Innovation (MICINN) under grants RTI2018- 097957-B-C33, RED2018-102768-T, TEC2015-71127-C2-1-R (FPI BES- 2016-077798) and NEOTEC-CDTI-SNEO20181232 (Alcyon Photonics S.L.); and the Community of Madrid – FEDER funds (S2018/NMT-4326). This project has received funding from the Horizon 2020 research and innovation program under Marie Sklodowska-Curie grant No. 734331
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dual-band fiber-chip grating coupler in a 300 mm silicon-on-insulator platform and 193 nm deep-UV lithography

  • González-Andrade, D.
  • Pérez-Galacho, Diego
  • Montesinos-Ballester, Miguel
  • Le Roux, Xavier
  • Cassan, Eric
  • Marris-Morini, Delphine
  • Cheben, Pavel
  • Vulliet, Nathalie
  • Monfray, Stephane
  • Boeuf, Frédéric
  • Vivien, Laurent
  • Velasco, Aitor V.
  • Alonso-Ramos, Carlos
4 pags., 5 figs., 1 tab., Surface grating couplers are fundamental building blocks for coupling the light between optical fibers and integrated photonic devices. However, the operational bandwidth of conventional grating couplers is intrinsically limited by their wavelength-dependent radiation angle. The few dual-band grating couplers that have been experimentally demonstrated exhibit low coupling efficiencies and rely on complex fabrication processes. Here we demonstrate for the first time, to the best of our knowledge, the realization of an efficient dual-band grating coupler fabricated using 193 nm deep-ultraviolet lithography for 10 Gbit symmetric passive optical networks. The footprint of the device is 17 × 10 µm. We measured coupling efficiencies of −4.9 and −5.2 dB with a 3-dB bandwidth of 27 and 56 nm at the wavelengths of 1270 and 1577 nm, corresponding to the upstream and downstream channels, respectively., Spanish Ministry of Science, Innovation and Universities (MICINN) (RTI2018-097957-B-C33, TEC2015-71127-C2-1-R with FPI Scholarship BES-2016-077798); Community of Madrid - FEDER funds (S2018/NMT-4326); Horizon 2020 Research and Innovation Program (Marie Sklodowska-Curie 734331); H2020 European Research Council (ERC POPSTAR 647342); European Commission (H2020- ICT-26127-2017 COSMICC 688516); French Industry Ministry (Nano2022 project under IPCEI program); Agence Nationale de la Recherche (ANR-MIRSPEC-17-CE09-0041).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Concurrent Passive Mode-Locked and Self- Q -Switched Operation in Laser Systems

  • Guo, J.
  • Cundiff, S.T.
  • Soto Crespo, J. M.
  • Akhmediev, N.
5 pags., 4 figs., Concurrent passive mode-locked and self-Q-switched operation of laser devices is modeled using the complex cubic-quintic Ginzburg-Landau equation. Experimental observations use a passively mode-locked fiber ring laser with a waveguide array as a fast saturable absorber. The shape of each individual self-Q-switched pulse and the periodic trains of pairs of such pulses are in a good qualitative agreement with the numerical results., J. G. acknowledges funding from the Chinese Scholarship Council (201706120188). The work of J. M. S. C. is funded by Spanish MICINN Grant No. RTI2018-097957-B-C33, and Comunidad de Madrid Grant No. S2018/NMT-4326 SINFOTON2-CM
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Q -switching bifurcation dynamics of passively mode-locked lasers

  • Akhmediev, N.
  • Soto Crespo, J. M.
8 pags., 9 figs., We model Q-switched pulses in passively mode-locked lasers using the cubic-quintic complex Ginzburg-Landau equation (CGLE). We show that a wide set of parameters of this equation leads to Q-switched pulses of triangular shape that consist of a periodic sequence of evolving dissipative solitons. Bifurcation diagrams demonstrating various transformations of these pulses are calculated in terms of five major parameters of the CGLE. The diagrams show period doubling transformations as well as the transition to a chaotic evolution of the Q-switched pulses., The work of J.M.S.C. is funded by Spanish MICINN Grant No. RTI2018-097957-B-C33, and Comunidad de Madrid Grant No. S2018/NMT-4326 SINFOTON2-CM.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Virtual transparency in ϕ-OTDR using second order Raman amplification and pump modulation

  • Nuño, Javier
  • Martín-López, Sonia
  • Ania Castañón, Juan Diego
  • González-Herráez, Miguel
  • Martins, Hugo F.
10 pags., 6 figs., In distributed optical fibre sensors, distributed amplification schemes have been investigated in order to increase the measurement range while avoiding the limitation imposed by the fibre attenuation and the nonlinear effects. Recently, the use of Raman amplification with an engineered intensity modulation has been demonstrated as an efficient way to produce a virtually lossless trace employing a single-end configuration. In this paper, we propose the combination of this technique with a simultaneous second order Raman pumping scheme for increasing the measurement range. The optimal modulation profile has been numerically analyzed and we experimentally demonstrate a sensor able to detect perturbations along 70 km of fibre, with a minimal SNR penalty along the total length. Thanks to this new approach, the sensitivity in the worst point is considerably improved, and the ASD noise floor is also reduced. The measurement range is extended approximately 15 km compared with the equivalent first order pumping case., Comunidad de Madrid (SINFOTON2-CM: P2018/NMT-4326, TALENTO-CM 2017-T2/TIC-5227); European Research Council (OCEAN-DAS: ERC-2019-POC-875302); Ministerio de Ciencia, Innovación y Universidades (IJCI-2017-33856, RTI2018-097957-B-C31, RTI2018-097957-B-C33).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Silicon photonic on-chip spatial heterodyne Fourier transform spectrometer exploiting the Jacquinot’s advantage

  • Dinh, T.T.D.
  • González-Andrade, D.
  • Montesinos-Ballester, Miguel
  • Deniel, Lucas
  • Szelag, Bertrand
  • Le Roux, Xavier
  • Cassan, Eric
  • Marris-Morini, Delphine
  • Vivien, Laurent
  • Cheben, Pavel
  • Velasco, Aitor V.
  • Alonso-Ramos, Carlos
4 pags., 5 figs., Silicon photonics on-chip spectrometers are finding important applications in medical diagnostics, pollution monitoring, and astrophysics. Spatial heterodyne Fourier transform spectrometers (SHFTSs) provide a particularly interesting architecture with a powerful passive error correction capability and high spectral resolution. Despite having an intrinsically large optical throughput (étendue, also referred to as Jacquinot’s advantage), state-of-the-art silicon SHFTSs have not exploited this advantage yet. Here, we propose and experimentally demonstrate for the first time, to the best of our knowledge, an SHFTS implementing a wide-area light collection system simultaneously feeding an array of 16 interferometers, with an input aperture as large as 90 µm × 60 µm formed by a two-way-fed grating coupler. We experimentally demonstrate 85 pm spectral resolution, 600 pm bandwidth, and 13 dB étendue increase, compared with a device with a conventional grating coupler input. The SHFTS was fabricated using 193 nm deep-UV optical lithography and integrates a large-size input aperture with an interferometer array and monolithic Ge photodetectors, in a 4.5 mm footprint., French Industry Ministry (Nano2022) Project under IPCEI Program; Agence Nationale de la Recherche (ANR-MIRSPEC-17-CE09- 0041); Spanish Ministry of Science, Innovation and Universities (MICINN) (RTI2018-097957-B-C33, TEC2015-71127-C2-1-R FPI scholarship BES2016-077798, RED2018-102768-T); Comunidad de Madrid - FEDER funds (S2018/NMT-4326); Horizon 2020 Framework Programme for Research and Innovation under Marie Sklodowska-Curie (734331).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sub-250 fs passively mode-locked ultralong ring fibre oscillators

  • Gallazzi, Francesca
  • Jiménez-Rodríguez, M.
  • Monroy, E.
  • Corredera, Pedro
  • González-Herráez, Miguel
  • Naranjo, Fernando B.
  • Ania Castañón, Juan Diego
10 pags., 9 figs., 1 tab., We report the experimental demonstration of a simple passive ultrafast harmonically mode-locked ultralong ring fibre laser architecture using InN-based semiconductor saturable absorber mirrors (SESAMs) that allows for the generation of high peak power ultrashort pulses without the need for external amplification stages. Fundamental mode-locking of the resonator in 1.67 to 2.37 km rings, emitting at 1.56 μm results in pulse widths below 250 fs, with repetition rates between 87 and 124 kHz, pulse energies above 200 nJ and peak powers between 1.0 and 1.27 MW, that could meet the requirements for high peak power demanding applications such as materials processing without additional amplification or compression stages., This work was funded by FP7 ITN programme ICONE (608099); Spanish MINECO grant TEC2015-71127-C2, RTI2018-097957-B-C33 and Comunidad de Madrid grant SINFOTON2-CM (S2018/NMT-4326).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Distributed Raman Amplification for Fiber Nonlinearity Compensation in a Mid-Link Optical Phase Conjugation System

  • Tan, Mingming
  • Rosa, Pawel
  • Nguyen, Tu T.
  • Al-Khateeb, Mohammad A. Z.
  • Iqbal, M. A.
  • Xu, Tianhua
  • Wen, Feng
  • Ania Castañón, Juan Diego
  • Ellis, Andrew D.
In this paper, we review different designs of distributed Raman amplifiers which have been proposed to minimize the signal power profile asymmetry in mid-link optical phase conjugation systems. We demonstrate how the symmetrical signal power profiles along the fiber can be achieved using various distributed Raman amplification techniques in the single-span and more realistic multi-span circumstances. In addition, we show the theoretically predicted results of the Kerr nonlinear product reduction with different Raman techniques in mid-link optical phase conjugator systems, and then in-line/long-haul transmission performance using numerical simulations., This research was funded by the UK Engineering and Physical Sciences Research Council (EPSRC) Grant EP/S003436/1 (PHOS), EP/V000969/1 (ARGON), EP/S016171/1(EEMC), the Polish Ministry of Science and Higher Education Grant 12300051, EU Horizon 2020 Project 101008280, RTI2018-097957-B-C33 (ECOSYSTEM) funded by Spanish MCIN/AEI/10.13039/501100011033, Research and innovation Programme SINFOTON2-CM (S2018/NMT-4326) co-financed by ESF funds, and the National Natural Science Foundation of China Grant 61975027., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A multi-position approach in a smart fiber-optic surveillance system for pipeline integrity threat detection

  • Tejedor, Javier
  • Macías-Guarasa, Javier
  • Martins, Hugo F.
  • Martín-López, Sonia
  • González-Herráez, Miguel
19 pags., 4 figs., 9 tabs. -- This article belongs to the Special Issue Pattern Recognition and Applications, We present a new pipeline integrity surveillance system for long gas pipeline threat detection and classification. The system is based on distributed acoustic sensing with phase-sensitive optical time domain reflectometry (ϕ-OTDR) and pattern recognition for event classification. The proposal incorporates a multi-position approach in a Gaussian Mixture Model (GMM)-based pattern classification system which operates in a real-field scenario with a thorough experimental procedure. The objective is exploiting the availability of vibration-related data at positions nearby the one actually producing the main disturbance to improve the robustness of the trained models. The system integrates two classification tasks: (1) machine + activity identification, which identifies the machine that is working over the pipeline along with the activity being carried out, and (2) threat detection, which aims to detect suspicious threats for the pipeline integrity (independently of the activity being carried out). For the machine + activity identification mode, the multi-position approach for model training obtains better performance than the previously presented single-position approach for activities that show consistent behavior and high energy (between 6% and 11% absolute) with an overall increase of 3% absolute in the classification accuracy. For the threat detection mode, the proposed approach gets an 8% absolute reduction in the false alarm rate with an overall increase of 4.5% absolute in the classification accuracy., This research was funded by a private research project by Fluxys, Gassco and Statoil named “PIT-STOP (Early detection of Pipeline Integrity Threats using a SmarT fiber-OPtic surveillance system)”, by the Spanish Ministry of Economy and Competitiveness under projects HEIMDALUAH (TIN2016-75982-C2-1-R) and ARTEMISA (TIN2016-80939-R), by the University of Alcalá under projects ACUFANO (CCG19/IA-024) and ARGOS (CCG20/IA-043), and by the Spanish Ministry of Science, Innovation and Universities (IJCI-2017-33856 and RTI2018-097957-B-C33). The APC was funded by the Ministry of Science, Innovation and Universities of Spain grant number RTI2018- 095324-B-I00.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Generation of a conjoint surface plasmon by an infrared nano-antenna array

  • Allsop, Thomas D.P.
  • Mou, Chengbo
  • Neal, Ronald
  • Kundrat, V.
  • Wang, Changle
  • Kalli, K.
  • Webb, David
  • Liu, Xiaoping
  • Davey, Paul
  • Culverhouse, P.
  • Ania Castañón, Juan Diego
13 pags., 7 figs., 1 tab., Localized surface plasmons (LSP) excited by optical fields have many potential applications resulting from their ability in detecting ultra-small, ambient refractive index change. Current methods using surface nano-patterning by means of lithography have given rise to LSP of limited propagation and interaction lengths, meaning that practical applications remain challenging. This article describes a new all-optical method of generating LSP by means of a carefully fabricated low-dimensional nano-structured material using a direct-write photochemical lithography. It is shown that the resulting array of localized SPs combine or “Conjoin” to have an unprecedented large interaction length, via coupled evanescent fields, giving rise to superior spectral sensitivities; several orders of magnitude better than those quoted elsewhere and reaching 6 × 103 nm RIU−1 in the aqueous regime and 104 nm RIU−1 in the gaseous regime. Numerical modeling is performed that shows this design of plasmonic platform is capable of producing sensitivities of 105–106 nm RIU−1. It is believed the results achieved in this investigation show that a unique conjoint SP operational mode will significantly impact areas of interest, such as single molecular dynamics, drug delivery systems, etc., This work was financially supported by joint grants EP/J010413and EP/J010391 for Aston University and the University of Plymouthalong with the University of Hull prosperity partnership: EP/R004900/1from the UK Engineering and Physical Sciences ResearchCouncil. C.M. acknowledges the support from National Natural Science Foundation of China (No. 61605107), as well as the European Commission Marie Skłodowska-Curie COFUND Action MULTIPLY(project 713694) and Spanish MICINN grant ECOSYSTEM(RTI2018-097957-B-C33), Comunidad de Madrid grant SINFOTON2-CM (S2018/NMT-4326), young Eastern Scholar Program from Shanghai Institutions of Higher Learnings (QD2015027), and National Young 1000 Talent Plan Program of China.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Role of the quintic nonlinear refractive term in the stability of dissipative solitons of the complex Ginzburg-Landau equation

  • Soto Crespo, J. M.
  • Akhmediev, N.
8 pags., 8 figs., We revisit the role of the quintic terms of the complex cubic-quintic Ginzburg-Landau equation in the generation of stable dissipative solitons. Using direct numerical simulations and a qualitative analysis, we show that the presence of one of the two quintic terms is a sine qua non. However, this term is not necessarily the quintic gain saturation term as had been demonstrated byMoores [Opt. Commun. 96, 65 (1993)] but can be the higher-order (quintic) nonlinear refraction term.We prove that by numerically solving this equation, and we performa qualitative analysis that shows that the negative soliton chirp, anomalous dispersion, and spectral filtering are the physical effects responsible for gain saturation in this case., Comunidad de Madrid (S2018/NMT-4326 SINFOT ON2-CM); Ministerio de Ciencia e Innovación (RTI2018-097957-B-C33).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultralong ring laser supercontinuum sources using standard telecommunication fibre

  • Gallazzi, Francesca
  • Cáceres, Inés
  • Monroy, Laura
  • Nuño, Javier
  • Pulido, Concepción
  • Corredera, Pedro
  • Naranjo, Fernando B.
  • González-Herráez, Miguel
  • Ania Castañón, Juan Diego
7 pags., 7 figs., 1 tab., The application of a recently demonstrated mode-locked ultralong pulsed fibre ring laser architecture (Gallazzi et al., 2021) to the inexpensive and efficient generation of supercontinuum from a pulsed output at 1.56 μm in standard single-mode telecommunication fibre is experimentally demonstrated. The impact of broadening fibre, dynamic switching between different harmonic modes and the influence of laser polarization on the properties of the generated supercontinuum are studied for three different kinds of telecommunication fibre. Flexible spectral broadening beyond 200 nm is obtained with good temporal correlation and pulse compression from 240 fs down to 50 fs., This work has been sponsored by G00 Grants RTI2018-097957-BC31 and RTI2018-097957-B-C33 (ECOSYSTEM) funded by MCIN/AEI/ 10.13039/501100011033, as well as by Comunidad de Madrid and FEDER Program under grant S2018/NMT-4326 (SINFOTON-2). J.N.’s work is supported by Atraccion ´ del Talento Postdoctoral Fellowship (Comunidad de Madrid, 2017-T2/TIC-5227). L.M.’s work is supported by FPU Predoctoral Fellowship (MEFP, AP-2019–2023).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mid-infrared Fourier-transform spectrometer based on metamaterial lateral cladding suspended silicon waveguides

  • Dinh, T.T.D.
  • Le Roux, Xavier
  • Koompai, Natnicha
  • Melati, D.
  • Montesinos-Ballester, Miguel
  • González-Andrade, D.
  • Cheben, Pavel
  • Velasco, Aitor V.
  • Cassan, Eric
  • Marris-Morini, Delphine
  • Vivien, Laurent
  • Alonso-Ramos, Carlos
4 pags., 4 figs., Integrated mid-infrared micro-spectrometers have a great potential for applications in environmental monitoring and space exploration. Silicon-on-insulator (SOI) is a promising platform to tackle this integration challenge, owing to its unique capability for large volume and low-cost production of ultra-compact photonic circuits. However, the use of SOI in the mid-infrared is restricted by the strong absorption of the buried oxide layer for wavelengths beyond 4 µm. Here, we overcome this limitation by utilizing metamaterial-cladded suspended silicon waveguides to implement a spatial heterodyne Fourier-transform (SHFT) spectrometer operating at wavelengths near 5.5 µm. The metamaterial-cladded geometry allows removal of the buried oxide layer, yielding measured propagation loss below 2 dB/cm at wavelengths between 5.3 and 5.7 µm. The SHFT spectrometer comprises 19 Mach-Zehnder interferometers with a maximum arm length imbalance of 200 µm, achieving a measured spectral resolution of 13 cm and a free spectral range of 100 cm1 at wavelengths near 5.5 µm., French Industry Ministry (Nano2022 project under IPCEI program); Agence Nationale de la Recherche (ANR-MIRSPEC- 17-CE09- 0041); Spanish Ministry of Science and Innovation (RTI2018-097957- B-C33, PID2020-115353RA-I00); Comunidad de Madrid (S2018/NMT4326).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surface Gravity Wave Interferometry and Ocean Current Monitoring With Ocean-Bottom DAS

  • Williams, Ethan F.
  • Zhan, Zhongwen
  • Martins, Hugo F.
  • Fernández-Ruiz, María R.
  • Martín-López, Sonia
  • González-Herráez, Miguel
  • Callies, Jörn
27 pags., 14 figs., The cross-correlation of a diffuse or random wavefield at two points has been demonstrated to recover an empirical estimate of the Green's function under a wide variety of source conditions. Over the past two decades, the practical development of this principle, termed ambient noise interferometry, has revolutionized the fields of seismology and acoustics. Yet, because of the spatial sparsity of conventional water column and seafloor instrumentation, such array-based processing approaches have not been widely utilized in oceanography. Ocean-bottom distributed acoustic sensing (OBDAS) repurposes pre-existing optical fibers laid in seafloor cables as dense arrays of broadband strain sensors, which observe both seismic waves and ocean waves. The thousands of sensors in an OBDAS array make ambient noise interferometry of ocean waves straightforward for the first time. Here, we demonstrate the application of ambient noise interferometry to surface gravity waves observed on an OBDAS array near the Strait of Gibraltar. We focus particularly on a 3-km segment of the array on the continental shelf, containing 300 channels at 10-m spacing. By cross-correlating the raw strain records, we compute empirical ocean surface gravity wave Green's functions for each pair of stations. We first apply beamforming to measure the time-averaged dispersion relation along the cable. Then, we exploit the non-reciprocity of waves propagating in a flow to recover the depth-averaged current velocity as a function of time using a waveform stretching method. The result is a spatially continuous matrix of current velocity measurements with resolution <100 m and <1 hr., We thank Red Eléctrica de España for access to their cable and Aragon Photonics for providing the interrogator unit. E. F. Williams was supported by an NSF Graduate Research Fellow-ship. Z. Zhan acknowledges support from the Moore Foundation and NSF under CAREER Award 1848166. M. R. Fernández-Ruiz acknowledges support from the Spanish MICINN under contract IJC2018-035684-I. M. González-Herráez acknowledges support from projects RTI2018-097957-B-C31 and RTI2018-097957-B-C33 funded by the Spanish Ministry of Science and Innovation, project SINFOTON2-CM: P2018/NMT-4326 funded by Comunidad de Madrid and Fondo Europeo de Desarrollo Regional (FEDER) Program, and project PLEC2021-007875 funded by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 and by the European Union NextGenera-tionEU/PRTR program
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cancellation of reference update-induced 1/f noise in a chirped-pulse das

  • Vidal-Moreno, Pedro J.
  • Rochat, Etienne
  • Fermoso, Pablo
  • Fernández-Ruiz, María R.
  • Martins, Hugo F.
  • Martín-López, Sonia
  • Ocaña, Manuel
  • González-Herráez, Miguel
4 pags., 4 figs., Distributed acoustic sensors (DAS) perform distributed and dynamic strain or temperature change measurements by comparing a measured time-domain trace with a previous fiber reference state. Large strain or temperature fluctuations or laser frequency noise impose the need to update such a reference, making it necessary to integrate the short-term variation measurements if absolute strain or temperature variations are to be obtained. This has the drawback of introducing a 1/f noise component, as noise is integrated with each cumulative variation measurement, which is detrimental to the determination of very slow processes (i.e., in the mHz frequency range or below). This work analyzes the long-term stability of chirped-pulse phasesensitive optical time-domain reflectometry (CP-φOTDR) with multi-frequency database demodulation (MFDD) to carry out "calibrated"measurements in a DAS along an unmodified SMF. It is shown that, under the conditions studied in this work, a "calibrated"chirped-pulse DAS (CP-DAS) with a completely suppressed reference update-induced 1/f noise component is achieved capable of making measurements over periods of more than 2 months with the same set of references, even when switching off the interrogator during the measurement., European Commission (PSI ref. PLEC2021-007875); Gobierno de España (RTI2018–097957-B-C31, RTI2018–097957-BC33); Ministerio de Ciencia e Innovación (IJC2018–035684-I, MCIN/AEI/10.13039/501100011033); Comunidad de Madrid (SINFOTON2-CM:S2018/NMT-4326); Universidad de Alcalá (FPI-Program, 2020/00198/001 - UAH INFR. A 2020-007), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Time-Expanded Φ-OTDR Based on Binary Sequences

  • Preciado-Garbayo, Javier
  • Soriano-Amat, M.
  • Sevillano, P.
  • Izquierdo, D.
  • Martins, Hugo F.
  • Martín-López, Sonia
  • González-Herráez, Miguel
  • Fernández-Ruiz, María R.
  • Martinez, J. J.
4 pags., 6 figs., In this letter, the capabilities of time-expanded phase-sensitive optical time-domain reflectometry (TE Φ-OTDR) using binary sequences are demonstrated. We present a highly flexible and integrable TE Φ-OTDR approach that allows a customized distributed optical fiber sensor (range, spatial resolution, and acoustic sampling) by simply changing the length of the binary sequence and the reference clock frequencies of the binary sequence generators. The here presented architecture eliminates the need for the cumbersome arbitrary signal generators used to date to create the dual-comb spectra for interrogating the fiber. In this approach, the use of large binary sequences allows us to obtain dual combs in a simple and cost-effective way. Spatial resolution of 1 cm is achieved, attaining 15,000 independent measurements points along the interrogated fiber, with a capability of sensing 30,000 measurements points., This work was supported in part by the Spanish the Ministry of Science and Innovation (MICINN) under Grant RTC Grant DI-17-09169 and thanks to CDTI IDI-20210156 project, in part by Comunidad de Madrid and FEDER Program (P2018/NMT-4326), the Spanish Government (RTI2018–097957-B-C31/C33). Also, this work has been partially funded by the Spanish MCIN/AEI/10.13039/ 501100011033 and by the European Union NextGenerationEU/PRTR program, under project PSI ref. PLEC2021-007875. M.S.A., and M.R.F.R. acknowledge financial support from the Spanish MICINN under contracts no. PRE-2019–087444 and IJC2018–035684-I, respectively. (Corresponding author: J. Preciado-Garbayo)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of Linewidth on the Relative Intensity Noise in Random Distributed Feedback Raman Fiber Lasers

  • Rota-Rodrigo, S.
  • Leandro, D.
  • Santarelli, G.
  • López-Amo, Manuel
  • Ania Castañón, Juan Diego
Artículo con 5 figuras, We experimentally explore the relation between spectral linewidth and RIN transfer in half-open cavity random distributed feedback Raman lasers, demonstrating for the first time the possibility of adjusting the pump-to-signal RIN transfer intensity and cut-off frequency by using spectral filtering in the reflector section. We apply this approach to a 50-km laser system, operating in the C-Band, reliant on a standard single-mode fiber. We obtained a minimum bandwidth of 13 pm, which translates into a visible RIN cut-off at 800 MHz., This research was funded by the Spanish Government grants RTI2018-097957-B-C33, PID2021-128000OB-C21, and PID2019-107270RB-C22; Conseil Régional d’Aquitaine (2017-1R50302-00013493); LAPHIA (Lasers and Photonics in Aquitaine); the Horizon 2020 Framework Programme (H2020) (Marie Sklodowska-Curie—748839); and Comunidad de Madrid project SINFOTON2-CM (S2018-NMT/4326). Additional support was from AEI/FEDER funds.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Experimental characterization of an ultra-broadband dual-mode symmetric Y-junction based on metamaterial waveguides

  • Fernández de Cabo, Raquel
  • Vilas, Jaime
  • Cheben, Pavel
  • Velasco, Aitor V.
  • González-Andrade, D.
7 pags., 9 figs., 1 tab., Silicon photonic integrated circuits routinely require 3-dB optical power dividers with minimal losses, small footprints, ultra-wide bandwidths, and relaxed manufacturing tolerances to distribute light across the chip and as a key building block to form more complex devices. Symmetric Y-junctions stand out among other power splitting devices owing to their wavelength-independent response and a straightforward design. Yet, the limited resolution of current fabrication methods results in a minimum feature size (MFS) at the tip between the two Y-junction arms that leads to significant losses for the fundamental mode. Here we propose to circumvent this limitation by leveraging subwavelength metamaterials in a new type of ultra-broadband and fabrication-tolerant Y-junction. An exhaustive experimental study over a 260 nm bandwidth (1420-1680 nm) shows excess loss below 0.3 dB for the fundamental transverse-electric mode (TE0) for a high-resolution lithographic process (MFS about 50 nm) and less than 0.5 dB for a fabrication resolution of 100 nm. Subwavelength Y-junctions with deterministically induced errors of plus-minus 10 nm further demonstrated robust fabrication tolerances. Moreover, the splitter exhibits excess loss lower than 1 dB for the first-order transverse-electric mode (TE1) within a 100 nm bandwidth (1475-1575 nm), using high-resolution lithography., This work has been funded by the Spanish Ministry of Science and Innovation (RTI2018-097957-B-C33, RED2018-102768-T, PID2020-115353RA-I00); the Spanish State Research Agency by ESF Investing in your future under grant PRE2021-096954 and European Union – NextGenerationEU, through the Recovery, Transformation and Resilience Plan (DIN2020-011488); the Community of Madrid – FEDER funds (S2018/NMT-4326); the European Union’s Horizon Europe research and innovation program under Marie Sklodowska-Curie grant No.101062518, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Time-expanded φOTDR using low-frequency electronics

  • Soriano-Amat, Miguel
  • Martins, Hugo F.
  • Martín-López, Sonia
  • González-Herráez, Miguel
  • Fernández-Ruiz, María R.
  • Durán, Vicente
10 pags., 7 figs., Time expanded phase-sensitive optical time-domain reflectometry (TE-φOTDR) is a recently reported technique for distributed optical fiber sensing based on the interference of two mutually coherent optical frequency combs. This approach enables distributed acoustic sensing with centimeter resolution while keeping the detection bandwidth in the megahertz range. In this paper, we demonstrate that TE-φOTDR can be realized with low-frequency electronics for both signal generation and detection. This achievement is possible thanks to the use of a couple of electro-optic comb generators driven by commercially available step recovery diodes. These components are fed by radio frequencies that are orders of magnitude lower than those involved in the signals so far originated by ultrafast waveform generation. The result is a simple, compact, low-cost and potentially field-deployable sensor that works without resorting to any decoding algorithm. Besides, high-resolution distributed sensing is carried out with no need of coding strategies or enhanced backscatter fibers. To check the capabilities of our system, we perform distributed strain sensing over a range of 20 m. The spatial resolution is 3 cm and the acoustic sampling rate can be increased up to 200 Hz. This performance reveals the prospective of the proposed approach for field applications, including structural health monitoring., Comunidad de Madrid/FEDER Program (SINFOTON2-CM: S2018/NMT-4326); Generalitat Valenciana (PROMETEO/2020/029); Universitat Jaume I (UJI-B2019-45); European Union Next Generation EU/PRTR Program (PSI ref. PLEC2021-007875, TREMORS ref. CPP2021-008869); CIN/AEI/10.13039/501100011033/ “FEDER A way of making Europe” (PID2021-124814NB-C22, PID2021-128000OB-C21, PID2021-128000OB-C22, RTI2018–097957-B-C31, RTI2018–097957-B-C32, RTI2018–097957-B-C33); HORIZON EUROPE European Innovation Council (Ref.101098992)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Broadband three-mode converter and multiplexer based on cascaded symmetric Y-junctions and subwavelength engineered MMI and phase shifters

  • González-Andrade, Andrés
  • Olivares, Irene
  • Fernández de Cabo, Raquel
  • Vilas, Jaime
  • Días-Ponte, Antonio
  • Velasco, Aitor V.
8 pags., 7 figs., 4 tabs., Mode-division multiplexing has emerged as a promising route for increasing transmission capacity while maintaining the same level of on-chip integration. Despite the large number of on-chip mode converters and multiplexers reported for the silicon-on-insulator platform, scaling the number of multiplexed modes is still a critical challenge. In this paper, we present a novel three-mode architecture based on multimode interference couplers, passive phase shifters and cascaded symmetric Y-junctions. This architecture can readily operate up to the third-order mode by including a single switchable phase shifter. Moreover, we exploit subwavelength grating metamaterials to overcome bandwidth limitations of multimode interference couplers and phase shifters, resulting in a simulated bandwidth of 161 nm with insertion loss and crosstalk below 1.18 dB and -20 dB, respectively., This work has been funded in part by the Spanish Ministry of Science and Innovation (MICINN) under grants RTI2018-097957-B-C33, PID2020-115353RA-I00; the Spanish State Research Agency (MCIN/AEI/10.13039/501100011033); the Community of Madrid – FEDER funds (S2018/NMT-4326); the European Union – NextGenerationEU through the Recovery, Transformation and Resilience Plan (DIN2020- 011488, PTQ2021-011974); and the European Union’s Horizon Europe research and innovation program under the Marie Sklodowska-Curie grant agreement N◦ 101062518., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-density and broad band optical frequency combs generated by pseudo-random phase modulation of optically injected gain-switched semiconductor lasers

  • Rosado, Alejandro
  • Fernández-Ruiz, María R.
  • Corredera, Pedro
  • Tijero, Jose Manuel G.
  • Esquivías, Ignacio
6 pags., 6 figs., We have demonstrated optical frequency combs (OFCs) featuring low and continuously tunable line spacing in the kilohertz range. The OFCs are generated by pulsed gain-switching of optically injected commercial semiconductor lasers emitting at around 1.55 μm. After generation, the OFCs are efficiently densified by pseudo-random-binary-sequence phase modulation. The case of an OFC generated by gain-switching at a repetition rate of 1 GHz has been numerically and experimentally analyzed and the conditions for optimal densification have been found. In this case, the comb has been densified by a factor of 2047 and exhibits a 90 GHz flat and broad spectrum consisting of more than 184,000 spectral lines, separated 488 kHz. Although this densification factor is not the largest that can be achieved with the method, it is more than 100 times larger than previously reported factors for gain-switching OFCs. These results open prospects for the use of potentially integrable gain-switching OFCs in applications requiring sub-megahertz line spacing., This work is supported by Ministerio de Ciencia e Innovacion of Spain (LIDERA, RTI2018-094118-B-C21, ECOSYSTEM, RTI2018-097957-B-C33, PRECISION, PID2021-128000OB-C21) and Comunidad de Madrid, Spain and FEDER Program under grant SINFOTON2-CM (S2018/NMT-4326). A. Rosado acknowledge support from ‘‘Ayudas Margarita Salas para la formación de jovenes doctores’’ from Universidad Politécnica de Madrid, financed by European Union - NextGenerationEU. M. R. Fernandez-Ruiz cknowledges the Ministerio de Ciencia e Innovacion of Spain for the contract IJC2018-035684-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Humidity-insensitive optical fibers for distributed sensing applications

  • Neves, Tiago F. P.
  • Scherino, Lorenzo
  • Bernard, Rémy
  • Bouet, Monika
  • Pastre, Aymeric
  • Magalhães, Regina
  • Martín-López, Sonia
  • Martins, Hugo F.
  • Petagna, Paolo
  • Thévenaz, Luc
13 pags., 18 figs., 4 tabs., Humidity is a critical environmental factor in various applications, and its temperature dependence must be considered when developing thermo-hygrometer fiber sensors. The optical fibers that constitute the sensor must have a temperature reference, which should be resistant to humidity to avoid cross-sensitivities. This paper presents two innovative optical fibers insensitive to humidity over temperatures ranging from -20∘ C to 55°C. To the best of our knowledge, the novel standard size optical fibers coated with acrylate and silicone are tested under controlled conditions using an optical time-domain reflectometer sensor based on Rayleigh scattering. The sensor achieves meter-range resolution over kilometers of length with a response time of few minutes., CERN, the European Organization for Nuclear Research; Ministère de l’Enseignement Supérieur et de la Recherche; Hauts-de-France Regional Council; European Regional Development Fund (CPER Photonics for Society, P4S); IRCICA, USR 3380, CNRS-Univ, F-59000 Lille, France; European Commission (FINESSE, MSCA-ITN-ETN-722509); Ministerio de Ciencia, Innovación y Universidades (IJCI-2017-33856, RTI2018-097957-BC31, RTI2018-097957-B-C33); Comunidad de Madrid and FEDER program (SINFOTON2-CM: P2018/NMT-4326)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultralong passively mode-locked ring fibre lasers in the femtosecond range assisted by Raman amplification

  • Pablo, Inés Cáceres
  • Gallazzi, Francesca
  • Solís, Fernando
  • Corredera, Pedro
  • Ania Castañón, Juan Diego
8 pags., 9 figs., 1 tab., A novel fibre ring laser architecture reliant on the use of Raman-assisted nonlinearity management over ultralong cavities is used for the first time to generate ultrashort pulses in ring resonators of up to 25.2 km. Using this approach, stable generation of pulses under 200 fs with estimated maximum energies of the order of μJ and an ultra-low repetition rate of 20 kHz is reported in passively mode-locked ultra-long ring fibre lasers of 10 km, overcoming previous limitations to pulse duration imposed by dispersive effects. The proposed system operates in the telecommunications infrared C-band, and relies on an Erbium-doped fibre amplifier, a polarization-insensitive InN-based semiconductor saturable absorber mirror and standard telecommunication fibres, and does not require external amplification or compression stages. Real-time monitoring of the output signal through the time-stretch dispersive Fourier transform technique shows that the average laser optical spectrum corresponds to that of the individual pulses. The presented devices constitute a new family of ultrafast fibre oscillators with unique characteristics suited for a broad range of applications., This work was funded by Ministerio de Ciencia, Innovación y Universidades (grants RTI2018-097957-B-C33 - ECOSYSTEM and PID2021-128000OB-C21 - PRECISION) and Comunidad de Madrid – Fondos FEDER (S2018/NMT-4326, SINFOTON2-CM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Recent progress in femtosecond pulsed ultralong fiber ring laser sources

  • Ania Castañón, Juan Diego
  • Cáceres, Inés
  • Gallazzi, Francesca
  • Corredera, Pedro
4 pags., 2 figs. -- Invited paper, Ultrafast-ultralong ring fiber lasers represent a new passively mode-locked laser architecture reliant on the use of Raman-assisted nonlinearity management over cavities extending tens of kilometers and fast, polarization-insensitive saturable absorption. These new sources are capable of supporting the generation of stable pulses shorter than 200 fs with ultra-low repetition rates of a few tens of kHz, overcoming previous limitations to pulse duration and peak power imposed by dispersive effects. The unique characteristics of this new family of ultrafast fiber oscillators makes them suitable for a broad range of applications. In this invited talk we will review some of the latest advances on the topic, focusing on the optimal design and implementation of such lasers., This work was funded by Ministerio de Ciencia, Innovación y Universidades (grants RTI2018-097957-B-C33 - ECOSYSTEM and PID2021-128000OB-C21 - PRECISION), Comunidad de Madrid – Fondos FEDER (S2018/NMT4326, SINFOTON2-CM) and Academy of Finland Flagship PREIN 320165.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Silicon photonic mode multiplexers based on subwavelength metamaterials and on-chip beam forming

  • González-Andrade, D.
  • Fernández de Cabo, Raquel
  • Vilas, J.
  • Dinh, T. T.D.
  • Luque-González, J. M.
  • Oser, D.
  • Aubin, G.
  • Amar, F.
  • Pérez-Galacho, D.
  • Olivares, I.
  • Dias, A.
  • Halir, R.
  • Ortega-Moñux, A.
  • Wangüemert-Pérez, J. G.
  • Molina-Fernández
  • Cassan, E.
  • Marris-Morini, D.
  • Cheben, P.
  • Vivien, L.
  • Velasco, Aitor V.
  • Alonso-Ramos, C.
4 pags., 1 fig. -- Event: SPIE OPTO, 2023, San Francisco, California, United States, Integration of photonic circuits on silicon offers a unique opportunity to address the scaling of inter- and intra-chip communications in an energy-efficient and cost-effective manner. Mode-division multiplexing (MDM) is deemed as one of the most promising technologies to increase aggregated data bandwidth and avoid a communication capacity crunch. In this invited talk, we review our latest advances on integrated silicon mode multiplexers, including new topologies based on subwavelength grating (SWG) metamaterials for extended broadband operation and higher-order mode support. Specifically, we report on an ultra-broadband multiplexer based on a phase shifter and a multimode interference (MMI) coupler both engineered with subwavelength metamaterials. Experimental measurements of a complete multiplexer-demultiplexer link show losses lower than 2 dB and crosstalk below -17 dB over a bandwidth of 245 nm (1427 – 1672 nm)., This work has been funded in part by the French Industry Ministry (Nano2022 project under IPCEI program); the Agence Nationale de la Recherche (ANR-MIRSPEC-17- CE09-0041); the European Union’s Horizon Europe (Marie SklodowskaCurie grant agreement Nº 101062518); the Spanish Ministry of Science and Innovation (MICINN) under grants RTI2018-097957-B-C33 and PID2020-115353RA-I00; the Spanish State Research Agency under grant MCIN/AEI/10.13039/501100011033 (PTQ2021-011974); the Community of Madrid – FEDER funds (S2018/NMT4326); the European Union – NextGenerationEU through the Recovery, Transformation and Resilience Plan (DIN2020-011488). The fabrication of the device was performed at the Plateforme de Micro-NanoTechnologie/C2N, which is partially funded by the Conseil General de l’Essonne. This work was partly supported by the French RENATECH network., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Supercontinuum in Telecom Applications

  • Smirnov, S. V.
  • Ania Castañón, Juan Diego
  • Kobtsev, S.
  • Turitsyn, S.K.
35 pags., 3 figs. -- 4th ed., This chapter documents progress in the extensive area of supercontinuum (SC) generation research devoted to applications in telecommunications, including research into the different mechanisms of spectral broadening and their interplay, SC generation in various media and the most promising SC applications in fibre-based and free-space telecom, This work was supported by the Ministry of Science and Higher Education of the Russian Federation (FSUS-2020-0036); Russian Foundation for Basic Research (grant No. 18-29-20025). The work of S.K.T. was supported by the Russian Science Foundation (Grant No. 17-72-30006). The work of J.D.A.C. was supported by the Spanish Ministry of Science and Innovation (Grant RTI2018-097957-B-C33) and Comunidad de Madrid (Grant S2018/NMT-4326)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High Resolution Distributed Optical Fiber Sensing Using Time-Expanded Phase-Sensitive Reflectometry

  • Fernández-Ruiz, María R.
  • Soriano-Amat, M.
  • Martins, Hugo F.
  • Durán, Vicente
  • Martín-López, Sonia
  • Gonzalez-Herraez, M.
6 pages, 2 figures, We have demonstrated a novel scheme for distributed optical fiber sensing based on the use of a dual frequency comb, which enables the development of a high-resolution (in the cm range) distributed sensor with significantly relaxed electronic requirements compared with previous schemes. This approach offers a promising solution for real time structure monitoring in a variety of fields, including transportation, manufacturing or mechatronics. In this work, we review the principle of operation of the technique, recent advances to improve its performance and different experimental tests., Comunidad de Madrid and FEDER Program (grant SINFOTON2-CM: P2018/NMT-4326), Generalitat Valenciana (grant PROMETEO/2020/029), the European Research Council (OCEAN-DAS: ERC-2019-POC-875302), the Spanish Government (projects RTI 2018–097957-B-C31, RTI 2018–097957-B-C32, and RTI 2018–097957-B-C33), Universitat Jaume I (project UJI-B2019–45) and Universidad de Alcalá (project CCG20/IA-028). MS-A, HM, VD, and MFR. acknowledge financial support from the Spanish MICINN under contracts no. PRE-2019–087444, IJCI-2017–33856, RYC2017–23668, and IJC2018–035684-I, respectively.
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

A multi-position approach in a smart fiber-optic surveillance system for pipeline integrity threat detection

  • Tejedor Noguerales, Javier
  • Macías Guarasa, Javier|||0000-0002-3303-3963
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
We present a new pipeline integrity surveillance system for long gas pipeline threat detection and classification. The system is based on distributed acoustic sensing with phase-sensitive optical time domain reflectometry (?-OTDR) and pattern recognition for event classification. The proposal incorporates a multi-position approach in a Gaussian Mixture Model (GMM)-based pattern classification system which operates in a real-field scenario with a thorough experimental procedure. The objective is exploiting the availability of vibration-related data at positions nearby the one actually producing the main disturbance to improve the robustness of the trained models. The system integrates two classification tasks: (1) machine + activity identification, which identifies the machine that is working over the pipeline along with the activity being carried out, and (2) threat detection, which aims to detect suspicious threats for the pipeline integrity (independently of the activity being carried out). For the machine + activity identification mode, the multi-position approach for model training obtains better performance than the previously presented single-position approach for activities that show consistent behavior and high energy (between 6% and 11% absolute) with an overall increase of 3% absolute in the classification accuracy. For the threat detection mode, the proposed approach gets an 8% absolute reduction in the false alarm rate with an overall increase of 4.5% absolute in the classification accuracy., Ministerio de Economía y Competitividad, Agencia Estatal de Investigación, Universidad de Alcalá, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Frequency stability requirements in quasi-integer-ratio time-expanded phase-sensitive OTDR

  • Soriano Amat, Miguel|||0000-0002-4819-3898
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Durán, Vicente
  • Fermoso Santos, Pablo
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Fernández Ruiz, María Del Rosario|||0000-0003-3561-2405
Time-expanded phase sensitive (TE-φ)OTDR is a recently reported technique for distributed fiber sensing that relies on the use of an electro-optic dual frequency comb (DFC) scheme. A distinctive feature of this approach is its ability to provide high spatial resolution (on the centimeter scale) with detection bandwidths orders of magnitude lower than those of conventional φOTDR systems. The stringent trade-off between resolution, range and sensing bandwidth that exists in TE-φ OTDR has demonstrated to be substantially relaxed by implementing two frequency combs with quasi-integer-ratio repetition rates. However, employing very dissimilar line separations (with a ratio between them > 100) is challenging due to the need of keeping the coherence over long sequences of interferograms, which eventually limits the attainable range. In this paper, we formulate the requirements for the frequency stability of the reference clock used in a quasi-integer-ratio DFC scheme. This analysis allows us to stablish the limits on the number of comb lines (i.e., on the number of available independent sensing points) for a particular reference clock. By using a rubidium atomic clock (with a relative frequency stability of ~10-13), we demonstrate up to 105 sensing points along 2 km of fiber with tens of Hz sensing bandwidth., Comunidad de Madrid, Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, Generalitat Valenciana, Universitat Jaume I
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Quadratic phase coding for SNR improvement in time-expanded phase-sensitive OTDR

  • Soriano Amat, Miguel|||0000-0002-4819-3898
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Durán, Vicente
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Fernández Ruiz, María Del Rosario|||0000-0003-3561-2405
M.S.A., H.F.M., V.D., and M.R.F.R. acknowledge financial support from the Spanish MICINN under contract no. PRE-2019–087444, IJCI-2017–33856, RYC-201723668, and IJC2018–035684-I, respectively., Time-expanded phase-sensitive optical time-domain reflectometry (TE−ΦOTDR ) is a dual-comb-based distributed optical fiber sensing technique capable of providing centimeter scale resolution while maintaining a remarkably low (MHz) detection bandwidth. Random spectral phase coding of the dual combs involved in the fiber interrogation process has been proposed as a means of increasing the signal-to-noise ratio (SNR) of the sensor. In this Letter, we present a specific spectral phase coding methodology capable of further enlarging the SNR of TE−ΦOTDR . This approach is based on the use of a quadratic spectral phase to precisely control the peak power of the comb signals. As a result, an SNR improvement of up to 8 dB has been experimentally attained with respect to that based on the random phase coding previously reported., Comunidad de Madrid, Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación, Generalitat Valenciana, Universitat Jaume I, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

Towards ultra-stable DAS measurements

  • Vidal Moreno, Pedro Jose|||0000-0003-1123-7073
  • Rochat, Etienne
  • Fernández Ruiz, María Del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Ocaña Miguel, Manuel|||0000-0002-8875-1866
  • González Herráez, Miguel|||0000-0003-2555-2971
27th International Conference on Optical Fiber Sensors, 28/08/2022-02/09/2022, Alexandria, Estados Unidos., Distributed acoustic sensors cumulatively measure fiber variations, introducing a 1/f noise that makes long-term measurements impossible. We present an “absolute” measurement method that allows accurate single-shot measurements at frequencies from <0.1 μHz to acoustic frequencies., Comunidad de Madrid, Ministerio de Ciencia e innovación, Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Dual electro-optic comb spectroscopy using a single pseudo-randomly driven modulator

  • Durán, Vicente
  • Escobar Vera, Camilo José
  • Soriano Amat, Miguel|||0000-0002-4819-3898
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Fernández Ruiz, María Del Rosario|||0000-0003-3561-2405
We present a dual-comb scheme based on a single intensity modulator driven by inexpensive board-level pseudo-random bit sequence generators. The result is a simplified architecture that exhibits a long mutual coherence time (up to 50 s) with no need of stabilization feedback loops or self-correction algorithms. Unlike approaches that employ ultrafast arbitrary waveform generators, our scheme makes it possible to produce long interferograms in the time domain, reducing the difference in the line spacing of the combs even below the hertz level. In order to check the system accuracy, we report two spectroscopic measurements with a frequency sampling of 140 MHz. All these results are analyzed and discussed to evaluate the potential of our scheme to implement a field-deployable dual-comb generator., Comunidad de Madrid, Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación, Generalitat Valenciana, Universitat Jaume I
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Time-expanded Φ-OTDR based on binary sequences

  • Preciado Garbayo, Javier
  • Soriano Amat, Miguel|||0000-0002-4819-3898
  • Sevillano, Pascual
  • Izquierdo, David
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Fernández Ruiz, María Del Rosario|||0000-0003-3561-2405
  • Martínez, Juan J.
In this paper, the capabilities of time-expanded phase-sensitive optical time-domain reflectometry (TE 𝛷-OTDR) using binary sequences are demonstrated. We present a highly flexible and integrable TE 𝛷-OTDR approach that allows a customized distributed optical fiber sensor (range, spatial resolution, and acoustic sampling) by simply changing the length of the binary sequence and the reference clock frequencies of the binary sequence generators. The here presented architecture eliminates the need for the cumbersome arbitrary signal generators used to date to create the dual-comb spectra for interrogating the fiber. In this approach, the use of large binary sequences allows us to obtain dual combs in a simple and cost effective way. Spatial resolution of ~1 cm is achieved, attaining ~15,000 independent measurements points along the interrogated fiber, with a capability of sensing ~30,000 measurements points., Comunidad de Madrid, Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Perspective on distributed acoustic sensing for seismic activity monitoring

  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Soto, Marcelo A.
  • Williams, Ethan
  • Martín López, Sonia|||0000-0001-5203-6206
  • Zhan, Zhongwen
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
Continuous, real-time monitoring of surface seismic activity around the globe is of great interest for acquiring new insight in global tomography analyses and for recognition of seismic patterns leading to potentially hazardous situations. The already-existing telecommunication fiber optic network arises as an ideal solution for this application, owing to its ubiquity and the capacity of optical fibers to perform distributed, highly sensitive monitoring of vibrations at relatively low cost (ultra-high density of point sensors available with minimal deployment of new equipment). This perspective article discusses early approaches on the application of fiber-optic distributed acoustic sensors (DAS) for seismic activity monitoring. The benefits and potential impact of DAS technology in this kind of applications are here illustrated with new experimental results on teleseism monitoring based on a specific approach: the so-called chirped-pulse DAS. This technology offers promising prospects for the field of seismic tomography due to its appealing properties in terms of simplicity, consistent sensitivity across sensing channels and robustness. Furthermore, we also report on several signal processing techniques readily applicable to chirped-pulse DAS recordings for extracting relevant seismic information from ambient acoustic noise. The outcome presented here may serve as foundation for a novel conception for ubiquitous seismic monitoring with minimal investment., European Commission, Comunidad de Madrid, Ministerio de Economía y Competitividad, Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Time-expanded phase-sensitive optical time-domain reflectometry

  • Soriano Amat, Miguel|||0000-0002-4819-3898
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Durán, Vicente
  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
Phase-sensitive optical time-domain re flectometry (ΦOTDR) is a well-established technique that provides spatiotemporal measurements of an environmental variable in real time. This unique capability is being leveraged in an everincreasing number of applications, from energy transportation or civil security to seismology. To date, a wide number of different approaches have been implemented, providing a plethora of options in terms of performance (resolution, acquisition bandwidth, sensitivity or range). However, to achieve high spatial resolutions, detection bandwidths in the GHz range are typically required, substantially increasing the system cost and complexity. Here, we present a novel ΦOTDR approach that allows a customized time expansion of the received optical traces. Hence, the presented technique reaches cm-scale spatial resolutions over 1 km while requiring a remarkably low detection bandwidth in the MHz regime. This approach relies on the use of dual-comb spectrometry to interrogate the fibre and sample the backscattered light. Random phase-spectral coding is applied to the employed combs to maximize the signal-to-noise ratio of the sensing scheme. A comparison of the proposed method with alternative approaches aimed at similar operation features is provided, along with a thorough analysis of the new trade-offs. Our results demonstrate a radically novel high-resolution ΦOTDR scheme, which could promote new applications in metrology, borehole monitoring or aerospace., Comunidad de Madrid, Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación, Generalitat Valenciana, Universitat Jaume I, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

Spatially resolved dual-comb sensing using a single electro-optic modulator

  • Escobar Vera, Camilo José
  • Soriano Amat, Miguel|||0000-0002-4819-3898
  • Moreno Oyervides, Aldo
  • Ullah Khan, Farid
  • Bonilla Manrique, Oscar
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Martín López, Sonia|||0000-0001-5203-6206
  • Durán, Vicente
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Martin Mateos, Pedro
27th International Conference on Optical Fiber Sensors, 28/08/2022-02/09/2022, Alexandria, Estados Unidos., We present a dual-comb imaging system based on a single pseudo-randomly driven electro-optic modulator. The result is a cost-efficient and robust fiber-based scheme that can be employed to perform spatially resolved spectral sensing., Comunidad de Madrid, Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación, Generalitat Valenciana, Universitat Jaume I
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Using global existing fiber networks for environmental sensing

  • Ip, Ezra
  • Ravet, Fabien
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Huang, Ming-Fang
  • Okamoto, Tatsuya
  • Han, Shaobo
  • Narisetty, Chaitnaya
  • Fang, Jian
  • Huang, Yue-Kai
  • Salemi, Milad
  • Rochat, Etienne
  • Briffod, Fabien
  • Goy, Alexandre
  • Fernández Ruiz, María Del Rosario|||0000-0003-3561-2405
  • González Herráez, Miguel|||0000-0003-2555-2971
We review recent advances in distributed fiber optic sensing (DFOS) and their applications. The scattering mechanisms in glass, which are exploited for reflectometry-based DFOS, are Rayleigh, Brillouin, and Raman scatterings. These are sensitive to either strain and/or temperature, allowing optical fiber cables to monitor their ambient environment in addition to their conventional role as a medium for telecommunications. Recently, DFOS leveraged technologies developed for telecommunications, such as coherent detection, digital signal processing, coding, and spatial/frequency diversity, to achieve improved performance in terms of measurand resolution, reach, spatial resolution, and bandwidth. We review the theory and architecture of commonly used DFOS methods. We provide recent experimental and field trial results where DFOS was used in wide-ranging applications, such as geohazard monitoring, seismic monitoring, traffic monitoring, and infrastructure health monitoring. Events of interest often have unique signatures either in the spatial, temporal, frequency, or wavenumber domains. Based on the temperature and strain raw data obtained from DFOS, downstream postprocessing allows the detection, classification, and localization of events. Combining DFOS with machine learning methods, it is possible to realize complete sensor systems that are compact, low cost, and can operate in harsh environments and difficult-to-access locations, facilitating increased public safety and smarter cities., Comunidad de Madrid, Ministerio de Ciencia e Innovación, Universidad de Alcalá, Agencia Estatal de Investigación, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Cancellation of reference update-induced 1/f noise in a chirped-pulse DAS

  • Vidal Moreno, Pedro Jose|||0000-0003-1123-7073
  • Rochat, Etienne
  • Fermoso Santos, Pablo
  • Fernández Ruiz, María Del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Ocaña Miguel, Manuel|||0000-0002-8875-1866
  • González Herráez, Miguel|||0000-0003-2555-2971
Distributed acoustic sensors (DAS) perform distributed and dynamic strain or temperature change measurements by comparing a measured time-domain trace with a previous fiber reference state. Large strain or temperature fluctuations or laser frequency noise impose the need to update such a reference, making it necessary to integrate the short-term variation measurements if absolute strain or temperature variations are to be obtained. This has the drawback of introducing a 1/f noise component, as noise is integrated with each cumulative variation measurement, which is detrimental to the determination of very slow processes (i.e., in the mHz frequency range or below). This work analyzes the long-term stability of chirped-pulse phase-sensitive optical time-domain reflectometry (CP-?OTDR) with multi-frequency database demodulation (MFDD) to carry out "calibrated" measurements in a DAS along an unmodified SMF. It is shown that, under the conditions studied in this work, a "calibrated" chirped-pulse DAS (CP-DAS) with a completely suppressed reference update-induced 1/f noise component is achieved capable of making measurements over periods of more than 2 months with the same set of references, even when switching off the interrogator during the measurement., Comunidad de Madrid, Ministerio de Ciencia e Innovación, Universidad de Alcalá
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Effect of linewidth on the relative intensity noise in random distributed feedback raman fiber lasers

  • Rota Rodrigo, Sergio
  • Leandro González, Daniel
  • Santarelli, Giorgio
  • López-Amo Sáinz, Manuel
  • Ania-Castañón, Juan Diego
We experimentally explore the relation between spectral linewidth and RIN transfer in half-open cavity random distributed feedback Raman lasers, demonstrating for the first time the possibility of adjusting the pump-to-signal RIN transfer intensity and cut-off frequency by using spectral filtering in the reflector section. We apply this approach to a 50-km laser system, operating in the C-Band, reliant on a standard single-mode fiber. We obtained a minimum bandwidth of 13 pm, which translates into a visible RIN cut-off at 800 MHz., This research was funded by the Spanish Government grants RTI2018-097957-B-C33, PID2021-128000OB-C21, and PID2019-107270RB-C22; Conseil Régional d’Aquitaine (2017-1R50302-00013493); LAPHIA (Lasers and Photonics in Aquitaine); the Horizon 2020 Framework Programme (H2020) (Marie Sklodowska-Curie—748839); and Comunidad de Madrid project SINFOTON2-CM (S2018-NMT/4326). Additional support was from AEI/FEDER funds.