Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

How Reproducible are Surface Areas Calculated from the BET Equation?

  • Osterrieth, Johannes W. M.
  • Rodríguez Navarro, Jorge Andrés|||0000-0002-8359-0397
This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (NanoMOFdeli), ERC-2016-COG 726380, Innovate UK (104384) and EPSRC IAA (IAA/RG85685). N.R. acknowledges the support of the Cambridge International Scholarship and the TrinityHenry Barlow Scholarship (Honorary). O.K.F. and R.Q.S. acknowledge funding from the U.S. Department of Energy (DE-FG02-08ER15967). R.S.F. and D.B. acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (SCoTMOF), ERC-2015-StG 677289. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA-0003525. The authors gratefully acknowledge funding from the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Hydrogen and Fuel Cell Technologies Office, through the Hydrogen Storage Materials Advanced Research Consortium (HyMARC). This paper describes objective technical results and analysis. Any subjective views or opinions that might be expressed in the paper do not necessarily represent the views of the U.S. Department of Energy or the United States Government. J.D.E. acknowledges the support of the Alexander von Humboldt Foundation and the Center for Information Services and High Performance Computing (ZIH) at TU Dresden. S.K.G. and S.M. acknowledge SERB (Project No. CRG/2019/000906), India for financial support. K.K. and R.K. acknowledge Active Co. Research Grant for funding. S.K. acknowledges funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (COSMOS), ERC-2017-StG 756489. N.L. and J.G.M acknowledge funding from the European Commission through the H2020-MSCA-RISE-2019 program (ZEOBIOCHEM -872102) and the Spanish MICINN and AEI/FEDER (RTI2018-099504-B-C21). N.L. thanks the University of Alicante for funding (UATALENTO17-05). ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706) S.M.J.R. and A.L. wish to thank the Fund for Scientific Research Flanders (FWO), under grant nos. 12T3519N and 11D2220N. L.S. was supported by the EPSRC Cambridge NanoDTC EP/L015978/1. C.T.Y. and T.S.N. acknowledges funds from the National Research Foundation of Korea, NRF-2017M3A7B4042140 and NRF-2017M3A7B4042235. P.F. and H. Y. acknowledge US Department of Energy, Office of Basic Energy Sciences, Materials Sciences and Engineering Division under Award No. DE-SC0010596 (P.F.). R.O. would like to acknowledge funding support during his Ph.D. study from Indonesian Endowment Fund for Education-LPDP with the contract No. 202002220216006. Daniel Siderius: Official contribution of the National Institute of Standards and Technology (NIST), not subject to copyright in the United States of America. Daniel Siderius: Certain commercially available items may be identified in this paper. This identification does not imply recommendation by NIST, nor does it imply that it is the best available for the purposes described. B.V.L, S.T.E and A.M.P acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program (Grant agreement no. 639233, COFLeaf)., Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer–Emmett–Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of microand mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already-measured raw adsorption isotherms were provided to sixty-one labs, who were asked to calculate the corresponding BET areas. This roundrobin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called “BET surface identification” (BETSI), expands on the well-known Rouquerol criteria and makes an unambiguous BET area assignment possible., European Research Council (ERC) ERC-2016-COG 726380 ERC-2015-StG 677289 ERC-2017-StG 756489 639233, UK Research & Innovation (UKRI) Innovate UK 104384 UK Research & Innovation (UKRI), Engineering & Physical Sciences Research Council (EPSRC) IAA/RG85685, Cambridge International Scholarship TrinityHenry Barlow Scholarship, United States Department of Energy (DOE) DE-FG02-08ER15967, National Nuclear Security Administration DE-NA-0003525, United States Department of Energy (DOE), Alexander von Humboldt Foundation, Center for Information Services and High Performance Computing (ZIH) at TU Dresden, Department of Science & Technology (India), Science Engineering Research Board (SERB), India CRG/2019/000906, Active Co. Research Grant, European Commission through the H2020-MSCA-RISE-2019 program ZEOBIOCHEM -872102, Spanish MICINN and AEI/FEDER RTI2018-099504-B-C21, University of Alicante UATALENTO17-05, Spanish Government SEV-2017-0706 FWO 12T3519N 11D2220N, UK Research & Innovation (UKRI), Engineering & Physical Sciences Research Council (EPSRC) EP/L015978/1, National Research Foundation of Korea NRF-2017M3A7B4042140 NRF-2017M3A7B4042235, United States Department of Energy (DOE) DE-SC0010596, Indonesian Endowment Fund for Education-LPDP 202002220216006
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Artificial intelligence reveals unbalanced sustainability domains in funded research

  • Varelas, Panagiotis
  • Larosa, Francesca
  • Contino, Francesco
  • Nerini, Francesco Fuso
  • García-Martínez, Javier
  • Garibo-i-Orts, Óscar
  • Parente, Alessandro
  • Vinuesa, Ricardo
  • Hoyas, Sergio|||0000-0002-8458-7288
  • Conejero, J. Alberto|||0000-0003-3681-7533
[EN] To meet the 2030 Agenda for Sustainable Development, all Sustainable Development Goals (SDGs) must receive adequate and balanced funding. This study applies artificial intelligence to analyze research proposals accepted between 2015 and 2023 in the European Union and the United States, focusing on datasets from the European Research Council and the National Science Foundation, respectively. Despite the growing application of Artificial Intelligence (AI) in various domains, there remains a lack of comprehensive analysis that applies AI to examine funding allocation across SDGs and gender disparities in scientific research. This study addresses this unmet need by using AI to uncover imbalances in funding distribution, offering insights into current funding instruments. We reveal critical coverage disparities across SDGs, with both funding instruments prioritizing SDG 9 (Industry, Innovation, and Infrastructure), highlighting a potential overemphasis on this goal. Additionally, we document pronounced gender imbalances among principal investigators across nearly all SDGs, except for SDG 5 (Gender Equality), in which female researchers are comparatively better represented. Our results indicate an urgent need for more inclusive and balanced approaches to achieve sustainable development, starting with allocation of research funding. By providing a nuanced understanding of funding dynamics and advocating strategic reallocations, this study offers actionable policy design and planning insights to foster a more equitable and comprehensive support system for sustainability-focused research endeavours., PV, AP, and FC acknowledge support from the Energy Transition Fund of Belgium. FL, FFN, and RV acknowledge funding from Digital Futures. FL also acknowledges funding from the European Union's Horizon Europe research and innovation programme under the Marie Sklodowska-Curie grant Agreement No. 101150729. SH is partially funded by project PID2021-128676OB-I00 at Ministerio de Ciencia, Innovation y Universidades/FEDER. JAC was supported by the Generalitat Valenciana, Project PROMETEO CIPROM/2022/21. JGM thanks the funding received from the European Union's Hori-zon 2020 Research and Innovation program under Grant agreement No 872102, the Spanish Ministry of Science, Grant PID2021-1287610B-C21 by MCIN/AEI/10.13039/501100011033 by "ERDF A way of making Europe", the Generalitat Valenciana through CIPROM/2023/2, and the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Leveraging mesoporosity and acidity in interzeolite transformation intermediates for plastic waste valorization

  • Martinez-Ortigosa, Joaquin
  • Tarach, Karolina A.
  • Rogala, Oliwia
  • Linares, Noemi
  • Góra-Marek, Kinga
  • García-Martínez, Javier
[EN] Interzeolite Transformation Intermediates (ITIs) produced by the partial interconversion of FAU to BEA zeolites were systematically investigated as catalysts for the cracking of low-density polyethylene (LDPE) and polystyrene (PS). These materials exhibit a unique combination of structural features, including strong Br & Oslash;nsted acidity and well-developed intracrystalline mesoporosity. Comprehensive characterization by XRD, N2 physisorption, UV-Vis Raman spectroscopy, 27Al MAS NMR, and TEM confirmed their hybrid nature, incorporating elements of both the parent FAU and daughter BEA zeolites. Catalytic performance was benchmarked against fully formed zeolites (FAU, BEA) and a mesoporous aluminosilicate (Al-MCM-41). For LDPE cracking, strong acidity and well-defined microporosity were found to be critical, with conventional zeolites outperforming ITIs. In contrast, ITIs exhibited superior catalytic activity and stability for PS cracking owing to their well-connected mesoporosity and balanced acidity profiles. A key finding of this study is that a catalyst with both large mesoporosity and the strongest acidity is not always the best. For example, PS cracking benefited from catalysts with moderate acidity and high mesoporosity, while LDPE cracking required materials with stronger acid sites. In all cases, ITIs outperformed mesoporous catalysts derived from amorphous precursors, with Al-MCM-41 consistently showing the lowest catalytic activity. Operando FT-IR-GC-MS provided insights into the reaction mechanisms and product distributions, revealing the role of ITIs in enhancing resistance to coking deactivation. ITIs were advantageous for PS dealkylation and for promoting the selective formation of olefins during LDPE cracking. Temperatureprogrammed oxidation (TPO) studies showed that the well-interconnected mesoporosity of ITIs facilitated coke oxidation compared to the poorly interconnected channels of conventional zeolites. These results highlight the potential of ITIs as tailor-made catalysts for plastic waste valorization, with performance tunable by their intermediate structural properties., This project has received funding from the European Union's Horizon 2020 Research and Innovation program under Grant agreement No 872102, the Spanish Ministry of Science, Grant PID2021-1287610B-C21 by MCIN/AEI/10.13039/501100011033 by "ERDF A way of mak-ing Europe", the Generalitat Valenciana through CIPROM/2023/2, and the Advanced Materials programme, supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. J.M-O acknowledges the financial support from the European Union - NextGeneration EU through the Universitat Polcitecnica de Valencia, Ministerio de Universidades, Plan de Recuperacion, Transformacion y Resiliencia for the Margarita Salas grant. This project has received funding from the European Union's Horizon 2020 research and innovation programme under Grant Agreement No 101008500. KGM, KAT, and OR thank the National Science Centre, Poland [Grant No. 2021/43/B/ST4/00307] . The research was partially carried out using research infrastructure purchased with the funds of the European Union in the framework of the Smart Growth Operational Programme, Measure 4.2; Grant No. POIR.04.02.00-00-D001/20-00, "ATOMIN 2.0 - ATOMic scale science for the INnovative economy".
Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

How reproducible are surface areas calculated from the BET equation?

  • Osterrieth, Johannes W. M.
  • Zamora Abanades, Félix Juan
  • Montoro Cano, María del Carmen
Artículo escrito por un elevado número de autores, solo se referencian el que aparece en primer lugar, el nombre del grupo de colaboración, si le hubiere, y los autores pertenecientes a la UAM, Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer–Emmett–Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of micro- and mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already-measured raw adsorption isotherms were provided to sixty-one labs, who were asked to calculate the corresponding BET areas. This round-robin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called “BET surface identification” (BETSI), expands on the well-known Rouquerol criteria and makes an unambiguous BET area assignment possible
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

How Reproducible are Surface Areas Calculated from the BET Equation?

  • Osterrieth, Johannes W. M.
  • Rampersad, James
  • Madden, David
  • Rampal, Nakul
  • Skoric, Luka
  • Connolly, Bethany
  • Allendorf, Mark D.
  • Stavila, Vitalie
  • Snider, Jonathan L.
  • Ameloot, Rob
  • Marreiros, João
  • Bara, Dominic
  • Furukawa, Shuhei
  • Sánchez, Eli
  • Gascón, Jorge
  • Telalović, Selvedin
  • Ghosh, Sujit K.
  • Mukherjee, Soumya
  • Hill, Matthew R.
  • Sadiq, Muhammed Munir
  • Horcajada, Patricia
  • DeWitt, Stephen J. A.
  • Salcedo Abraira, Pablo
  • Kaneko, Katsumi
  • Kukobat, Radovan
  • Kenvin, Jeff
  • Keskin, Seda
  • Kitagawa, Susumu
  • Otake, Ken-Ichi
  • Lively, Ryan P.
  • Llewellyn, Phillip
  • Lotsch, Bettina V.
  • Emmerling, Sebastian T.
  • Pütz, Alexander M.
  • Martí-Gastaldo, Carlos
  • Padial, Natalia M.
  • García-Martínez, Javier
  • Linares, Noemí
  • Maspoch, Daniel
  • Rosseinsky, Matthew J.
  • Suárez, José Antonio
  • Moghadam, Peyman
  • Oktavian, Rama
  • Morris, Russell E.
  • Wheatley, Paul S.
  • Navarro, Jorge
  • Petit, Camille
  • Danaci, David
  • Katsoulidis, Alexandros P.
  • Schröder, Martin
  • Han, Xue
  • Yang, Sihai
  • Serre, Christian
  • Mouchaham, Georges
  • Sholl, David S.
  • Thyagarajan, Raghuram
  • Siderius, Daniel
  • Veen, Monique A. van der
  • Snurr, Randall Q.
  • Goncalves, Rebecca B.
  • Telfer, Shane
  • Lee, Seok J.
  • Ting, Valeska P.
  • Rowlandson, Jemma L.
  • Uemura, Takashi
  • Iiyuka, Tomoya
  • Rega, Davide
  • Speybroeck, Veronique van
  • Rogge, Sven M. J.
  • Lamaire, Aran
  • Walton, Krista S.
  • Bingel, Lukas W.
  • Wuttke, Stefan
  • Andreo, Jacopo
  • Yaghi, Omar
  • Ania, Conchi O.
  • Zhang, Bing
  • Yavuz, Cafer T.
  • Nguyen, Thien S.
  • Zamora, Félix
  • Montoro, Carmen
  • Zhou, Hongcai
  • Kirchon, Angelo
  • Fairen-Jiménez, David
  • Azevedo, Diana
  • Vilarrasa-García, E.
  • Santos, Bianca S.
  • Bu, Xian-He
  • Chang, Ze
  • Bunzen, Hana
  • Champness, Neil R.
  • Griffin, Sarah L.
  • Chen, Banglin
  • Lin, Rui-Biao
  • Coasne, Benoit
  • Cohen, Seth
  • Moreton, Jessica C.
  • Colón, Yamil J.
  • Chen, Linjiang
  • Clowes, Rob
  • Coudert, François Xavier
  • Cui, Yong
  • Hou, Bang
  • D'Alessandro, Deanna M.
  • Doheny, Patrick W.
  • Dincă, Mircea
  • Sun, Chenyue
  • Doonan, Christian J.
  • Huxley, Michael Thomas
  • Evans, Jack D.
  • Falcaro, Paolo
  • Ricco, Raffaele
  • Farha, Omar
  • Idrees, Karam B.
  • Islamoglu, Timur
  • Feng, Pingyun
  • Chang, Huajun
  • Forgan, Ross S.
Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer–Emmett–Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of micro- and mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already-measured raw adsorption isotherms were provided to sixty-one labs, who were asked to calculate the corresponding BET areas. This round-robin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called “BET surface identification” (BETSI), expands on the well-known Rouquerol criteria and makes an unambiguous BET area assignment possible., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (NanoMOFdeli), ERC-2016-COG 726380, Innovate UK (104384) and EPSRC IAA (IAA/RG85685). N.R. acknowledges the support of the Cambridge International Scholarship and the Trinity-Henry Barlow Scholarship (Honorary). O.K.F. and R.Q.S. acknowledge funding from the U.S. Department of Energy (DE-FG02-08ER15967). R.S.F. and D.B. acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (SCoTMOF), ERC-2015-StG 677289. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA-0003525. The authors gratefully acknowledge funding from the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Hydrogen and Fuel Cell Technologies Office, through the Hydrogen Storage Materials Advanced Research Consortium (HyMARC). J.D.E. acknowledges the support of the Alexander von Humboldt Foundation and the Center for Information Services and High Performance Computing (ZIH) at TU Dresden. S.K.G. and S.M. acknowledge SERB (Project No. CRG/2019/000906), India for financial support. K.K. and R.K. acknowledge Active Co. Research Grant for funding. S.K. acknowledges funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (COSMOS), ERC-2017-StG 756489. N.L. and J.G.M acknowledge funding from the European Commission through the H2020-MSCA-RISE-2019 program (ZEOBIOCHEM – 872102) and the Spanish MICINN and AEI/FEDER (RTI2018-099504-B-C21). N.L. thanks the University of Alicante for funding (UATALENTO17-05). ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706) S.M.J.R. and A.L. wish to thank the Fund for Scientific Research Flanders (FWO), under grant nos. 12T3519N and 11D2220N. L.S. was supported by the EPSRC Cambridge NanoDTC EP/L015978/1. C.T.Y. and T.S.N. acknowledges funds from the National Research Foundation of Korea, NRF-2017M3A7B4042140 and NRF-2017M3A7B4042235. P.F. and H. Y. acknowledge US Department of Energy, Office of Basic Energy Sciences, Materials Sciences and Engineering Division under Award No. DE-SC0010596 (P.F.). R.O. would like to acknowledge funding support during his Ph.D. study from Indonesian Endowment Fund for Education-LPDP with the contract No. 202002220216006. B.V.L, S.T.E and A.M.P acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program (Grant agreement no. 639233, COFLeaf).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Membranes of polymer of intrinsic microporosity PIM-1 for gas separation: Modification strategies and meta-analysis

  • Qiu, Boya
  • Gao,Yong
  • Gorgojo, Patricia
  • Fan, Xiaolei
Polymers of intrinsic microporosity (PIMs) have received considerable attention for making high-performance membranes for carbon dioxide separation over the last two decades, owing to their highly permeable porous structures. However, challenges regarding its relatively low selectivity, physical aging, and plasticisation impede relevant industrial adoptions for gas separation. To address these issues, several strategies including chain modification, post-modification, blending with other polymers, and the addition of fillers, have been developed and explored. PIM-1 is the most investigated PIMs, and hence here we review the state-of-the-arts of the modification strategies of PIM-1 critically and discuss the progress achieved for addressing the aforementioned challenges via meta-analysis. Additionally, the development of PIM-1-based thin film composite membranes is commented as well, shedding light on their potential in industrial gas separation. We hope that the review can be a timely snapshot of the relevant state-of-the-arts of PIMs guiding future design and optimisation of PIMs-based membranes for enhanced performance towards a higher technology readiness level for practical applications., This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No 872102. B.Q. thanks to the China Scholarship Council (CSC, file no. 202006240076)-University of Manchester joint studentship for supporting the PhD research. Y.G. and X.F. also thanks the special innovation project fund from the Institute of Wenzhou, Zhejiang University (No. XMGL-KJZX-202204)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

GO as gutter layer in superglassy thin film composite membranes for enhanced gas separation

  • Qiu, Boya
  • Yu, Ming
  • Alshurafa, Mustafa
  • López-Porfiri, Pablo
  • Pérez-Page, María
  • Foster, Andrew B.
  • Budd, Peter M.
  • Fan, Xiaolei
  • Gorgojo, Patricia
Polymers with intrinsic microporosity (PIM) have gathered considerable attention over the last two decades for fabricating high-performance membranes for CO2 separation, owing to their highly permeable and porous structures. Particularly, thin film composite (TFC) membranes with thin active layers (<5 μm) deposited onto more porous substrates are suitable for practical applications as they offer a combination of high permeance and mechanical strength. However, penetration of the active layer into the pores of the substrate leads to additional mass transfer resistance and creates defects and voids, thereby reducing the membrane's permeance and selectivity. Herein, we introduced graphene oxide (GO) as a gutter layer in TFCs made with PIM-1. GO flakes were deposited to cover the substrates partially, thereby reducing polymer penetration while maintaining good structural integrity of the TFCs. We successfully fabricated a series of PIM-1 TFCs by kiss coating, with the thinnest active layer at ∼179 nm. These TFCs exhibited an ideal selectivity for CO2/N2 of 44.4, and the CO2 permeance was increased by up to 104 % under optimised conditions. The strategy is generic as well which was validated using carboxylated PIM-1 (cPIM-1)., P.G. is grateful to the Spanish Ministerio de Economía y Competitividad and the European Social Fund for her Ramon y Cajal Fellowship (RYC2019-027060-I/AEI/10.13039/501100011033). B.Q. thanks to the China Scholarship Council (CSC, file no. 202006240076)-University of Manchester joint studentship for supporting the PhD research. This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 872102. A.B.F. is supported by EPSRC Programme Grant “SynHiSel” (EP/V047078/1)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Membranes of Polymer of Intrinsic Microporosity PIM-1 for Gas Separation: Modification Strategies and Meta-Analysis

  • Qiu, Boya
  • Gao, Yong
  • Gorgojo, Patricia
  • Fan, Xiaolei
Polymers of intrinsic microporosity (PIMs) have received considerable attention for making high-performance membranes for carbon dioxide separation over the last two decades, owing to their highly permeable porous structures. However, challenges regarding its relatively low selectivity, physical aging, and plasticisation impede relevant industrial adoptions for gas separation. To address these issues, several strategies including chain modification, post-modification, blending with other polymers, and the addition of fillers, have been developed and explored. PIM-1 is the most investigated PIMs, and hence here we review the state-of-the-arts of the modification strategies of PIM-1 critically and discuss the progress achieved for addressing the aforementioned challenges via meta-analysis. Additionally, the development of PIM-1-based thin film composite membranes is commented as well, shedding light on their potential in industrial gas separation. We hope that the review can be a timely snapshot of the relevant state-of-the-arts of PIMs guiding future design and optimisation of PIMs-based membranes for enhanced performance towards a higher technology readiness level for practical applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

GO as gutter layer in superglassy thin film composite membranes for enhanced gas separation

  • Qiu, Boya
  • Yu, Ming
  • Alshurafa, Mustafa
  • López-Porfiri, Pablo
  • Perez-Page, María
  • Foster, Andrew B.
  • Budd, Peter M.
  • Fan, Xiaolei
  • Gorgojo, Patricia
Polymers with intrinsic microporosity (PIM) have gathered considerable attention over the last two decades for fabricating high-performance membranes for CO2 separation, owing to their highly permeable and porous structures. Particularly, thin film composite (TFC) membranes with thin active layers (<5 μm) deposited onto more porous substrates are suitable for practical applications as they offer a combination of high permeance and mechanical strength. However, penetration of the active layer into the pores of the substrate leads to additional mass transfer resistance and creates defects and voids, thereby reducing the membrane's permeance and selectivity. Herein, we introduced graphene oxide (GO) as a gutter layer in TFCs made with PIM-1. GO flakes were deposited to cover the substrates partially, thereby reducing polymer penetration while maintaining good structural integrity of the TFCs. We successfully fabricated a series of PIM-1 TFCs by kiss coating, with the thinnest active layer at ∼179 nm. These TFCs exhibited an ideal selectivity for CO2/N2 of 44.4, and the CO2 permeance was increased by up to 104 % under optimised conditions. The strategy is generic as well which was validated using carboxylated PIM-1 (cPIM-1).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

How reproducible are surface areas calculated from the BET equation?

  • Osterrieth, Johannes W. M.
  • Rampersad, James
  • Madden, David
  • Rampal, Nakul
  • Skoric, Luka
  • Connolly, Bethany
  • Allendorf, Mark D.
  • Stavila, Vitalie
  • Snider, Jonathan L.
  • Ameloot, Rob|||0000-0003-3178-5480
  • Marreiros, João|||0000-0002-4898-2096
  • Ania, Conchi|||0000-0001-9517-8132
  • Azevedo, Diana
  • Vilarrasa-Garcia, E.|||0000-0003-4190-8763
  • Santos, Bianca F.
  • Bu, Xian-He
  • Chang, Ze
  • Bunzen, Hana|||0000-0003-1824-0291
  • Champness, Neil|||0000-0003-2970-1487
  • Griffin, Sarah|||0000-0003-4872-983X
  • Chen, Banglin
  • Lin, Rui-Biao
  • Coasne, Benoit|||0000-0002-3933-9744
  • Cohen, Seth
  • Moreton, Jessica C.
  • Colón, Yamil J.
  • Chen, Linjiang|||0000-0002-0382-5863
  • Clowes, Rob
  • Coudert, François-Xavier|||0000-0001-5318-3910
  • Cui, Yong
  • Hou, Bang
  • D'Alessandro, Deanna M.
  • Doheny, Patrick W.|||0000-0003-1705-8850
  • Dincă, Mircea
  • Sun, Chenyue
  • Doonan, Christian|||0000-0003-2822-0956
  • Huxley, Michael Thomas
  • Evans, Jack D.|||0000-0001-9521-2601
  • Falcaro, Paolo|||0000-0001-5935-0409
  • Riccò, Raffaele|||0000-0002-0296-9398
  • Farha, Omar
  • Idrees, Karam B.
  • Islamoglu, Timur
  • Feng, Pingyun
  • Yang, Huajun
  • Forgan, Ross|||0000-0003-4767-6852
  • Bara, Dominic
  • Furukawa, Shuhei|||0000-0003-3849-8038
  • Sanchez, Eli
  • Gascon, Jorge
  • Telalović, Selvedin
  • Ghosh, Sujit K.|||0000-0002-1672-4009
  • Mukherjee, Soumya|||0000-0003-2375-7009
  • Hill, Matthew R.
  • Sadiq, Muhammed Munir|||0000-0002-5326-6158
  • Horcajada, Patricia|||0000-0002-6544-5911
  • Salcedo-Abraira, Pablo|||0000-0003-4812-8938
  • Kaneko, Katsumi
  • Kukobat, Radovan|||0000-0003-4620-9451
  • Kenvin, Jeff
  • Keskin, Seda
  • Kitagawa, Susumu
  • Otake, Ken-ichi|||0000-0002-7904-5003
  • Lively, Ryan P.
  • DeWitt, Stephen J.A.
  • Llewellyn, Phillip
  • Lotsch, Bettina V.
  • Emmerling, Sebastian T.|||0000-0002-1558-2547
  • Pütz, Alexander M.
  • Martí-Gastaldo, Carlos|||0000-0003-3203-0047
  • Padial, Natalia M.|||0000-0001-6067-3360
  • Garcia-Martinez, Javier|||0000-0002-7089-4973
  • Linares, Noemi|||0000-0001-9376-2984
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Suárez del Pino, Jose Antonio|||0000-0001-5469-8959
  • Moghadam, Peyman
  • Oktavian, Rama|||0000-0003-0701-4213
  • Morris, Russel E.
  • Wheatley, Paul S.
  • Navarro, Jorge
  • Petit, Camille
  • Danaci, David|||0000-0002-7203-9655
  • Rosseinsky, Matthew J.
  • Katsoulidis, Alexandros P.|||0000-0003-0860-7440
  • Schröder, Martin|||0000-0001-6992-0700
  • Han, Xue
  • Yang, Sihai
  • Serre, Christian
  • Mouchaham, Georges|||0000-0001-8696-9733
  • Sholl, David S.
  • Thyagarajan, Raghuram
  • Siderius, Daniel W.|||0000-0002-6260-7727
  • Snurr, Randall Q.
  • Barbosa Goncalves, Rebecca|||0000-0001-5008-7798
  • Telfer, Shane
  • Lee, Seok J.
  • Ting, V.P.|||0000-0003-3049-0939
  • Rowlandson, Jemma L.
  • Uemura, Takashi
  • Iiyuka, Tomoya
  • van der Veen, Monique
  • Rega, Davide
  • Van Speybroeck, Veronique|||0000-0003-2206-178X
  • Rogge, Sven M.J.|||0000-0003-4493-5708
  • Lamaire, Aran|||0000-0003-0093-5490
  • Walton, Krista S.
  • Bingel, Lukas|||0000-0001-9839-886X
  • Wuttke, Stefan
  • Andreo, Jacopo
  • Yaghi, Omar M.
  • Zhang, Bing
  • Yavuz, Cafer Tayyar
  • Nguyen, Thien S.
  • Zamora, Félix|||0000-0001-7529-5120
  • Montoro, Carmen|||0000-0003-4984-2973
  • Zhou, Hongcai
  • Kirchon, Angelo
  • Fairen-Jimenez, David|||0000-0002-5013-1194
Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer-Emmett-Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of micro- and mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already-measured raw adsorption isotherms were provided to sixty-one labs, who were asked to calculate the corresponding BET areas. This round-robin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called "BET surface identification" (BETSI), expands on the well-known Rouquerol criteria and makes an unambiguous BET area assignment possible.