Pasar al contenido principal

GASIFICACION DE BIOMASA MEDIANTE TECNOLOGIAS DE CHEMICAL LOOPING PARA PRODUCCION DE GAS DE SINTESIS/H2 CON CAPTURA DE CO2

ENE2017-89473-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Negative CO2 emissions through the use of biofuels in chemical looping technology: A review

  • Mendiara, Teresa
  • García Labiano, Francisco
  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • Diego Poza, Luis F. de
  • Izquierdo Pantoja, María Teresa
  • Adánez Elorza, Juan
15 Figures, 11 Tables.-- © 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, In order to limit the increase in the global average temperature to 2 °C or below, the Paris Agreement proposed the reduction of CO2 emissions throughout this century. Bioenergy with CO2 capture and storage (BECCS) technologies represent an interesting option in order to allow this goal to be metgoal, because they are able to achieve negative CO2 emissions. Chemical looping (CL) is recognized as one of the most innovative CO2 capture technologies owing to its low energy penalty. CL processes permit the utilization of renewable fuels in a nitrogen-free atmosphere, given that the required oxygen is supplied by solid oxygen carriers. The present work presents an overview of the status of development of the use of biofuels in chemical looping technologies, including chemical looping combustion (CLC) and chemical looping with oxygen uncoupling (CLOU) for the production of heat/electricity, as well as chemical looping reforming (CLR), chemical looping gasification (CLG) and chemical looping coupled with water splitting (CLWS) for syngas/H2 generation. The main milestones in the development of such processes are shown, and the future trends and opportunities for CL technology with biofuels are discussed., This work was supported by the Spanish Ministry of Economy, Industry and Competitiveness (projects ENE2014-56857-R, ENE2016-77982-R, and ENE2017-89473-R), the European Regional Development Fund (ERDF), the Spanish National Research Council -CSIC- (201780E035) and the Regional Government of Aragón (T05_17R). T. Mendiara is grateful for the “Ramón y Cajal” post-doctoral contract awarded by MINEICO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermochemical assessment of chemical looping assisted by oxygen uncoupling with a MnFe-based oxygen carrier

  • Abad Secades, Alberto
  • Pérez-Vega, Raúl
  • Diego Poza, Luis F. de
  • Gayán Sanz, Pilar
  • Izquierdo Pantoja, María Teresa
  • García Labiano, Francisco
  • Adánez Elorza, Juan
9 Figures, 6 Tables.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, A previously developed manganese-iron mixed oxide doped with TiO2 shows promising properties for the combustion of solid fuels with intrinsic CO2 capture by Chemical Lopping assisted by Oxygen Uncoupling (CLaOU) owing to its oxygen uncoupling capability, i.e. ability to generate gaseous oxygen at high temperature, and to oxidize gaseous fuels such as H2, CO or CH4 by reacting with lattice oxygen. In this work, a window of suitable operating conditions was determined to facilitate the use of this material in a CLaOU unit. For this purpose, mass and enthalpy balances were performed for the whole CLaOU unit considering theoretical values of thermochemical parameters, such as the equilibrium constant of relevant reactions in CLaOU and the formation enthalpies of reacting solids. An air reactor temperature of 1148 K and a high air excess ratio are suggested in order to promote the transfer of oxygen via the oxygen uncoupling mechanism, which would be preferable for the combustion of solid fuels. Auto-thermal operation of the CLaOU unit is guaranteed for air excess ratio values λ < 3. The fuel reactor temperature is highly influenced by the oxygen carrier-to-fuel ratio (ϕ) and the oxygen carrier regeneration in the air reactor. Assuming a 50–75% regeneration of the oxygen uncoupling capability, and ϕ = 4–6, the fuel reactor temperature would be between 35 and 50 K above the air reactor temperature. The higher temperature in the fuel reactor could promote the fuel conversion, while oxygen carrier regeneration would be guaranteed by the lower air reactor temperature., This work was partially supported by the Ministerio de Economía, Industria y Competitividad (Projects: ENE2016-77982-R and ENE2017-89473R), by the Fondo Europeo de Desarrollo Regional (FEDER), and by the Consejo Superior de Investigaciones Científicas (CSIC project: 2017-80E035)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Life cycle assessment of natural gas fuelled power plants based on chemical looping combustion technology

  • Navajas, A.
  • Mendiara, Teresa
  • Goñi, Víctor
  • Jiménez Loygorri, Adrián
  • Gandía, L. M.
  • Abad Secades, Alberto
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
11 Figuras, 2 Tablas.-- Material suplementario disponible en línea en la página web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Among the different Carbon Capture and Storage (CCS) technologies being developed in the last decades, Chemical Looping Combustion (CLC) stands out since it allows inherent CO2 capture. In the CLC process, there is a solid oxygen carrier circulating between two reactors in a cycle that allows providing the oxygen needed for combustion. In one of the reactors, named as fuel reactor, the fuel is introduced and combusted while the oxygen carrier reduction takes place. In the second reactor, named air reactor, the oxygen carrier is reoxidized in air. Different materials based on copper, nickel and iron oxides have been proposed as oxygen carriers for the CLC process. This work presents an environmental evaluation of the CLC process for natural gas based on Life Cycle Assessment (LCA). Five different oxygen carrier materials already tested in pilot plants were considered and the results compared to the conventional natural gas combustion in a gas turbine in a combined cycle without and with CO2 capture using postcombustion capture with amines. In view of the results, lower impact of the CLC process compared to the base case is expected without and with CO2 capture. The influence of several variables on the results was considered, such as temperature in the air reactor, lifetime of the oxygen carrier and possibility of recuperation of the depleted oxygen carrier. The nickel-based oxygen carriers were identified as the most adequate to be used in natural gas combustion. However, due to their toxicity, several analyses were also performed in order to identify improvements in the known oxygen carriers that can qualify them to replace nickel-based materials., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) [grant numbers ENE2017-89473-R, ENE2016-77982-R] and the European Regional Development Fund (ERDF) under the program “Programa Operativo FEDER Aragón 2014-2020 - Construyendo Europa desde Aragón. Proyecto BiosinCO2 (LMP180_18)”. T. Mendiara thanks for the ‘‘Ramón y Cajal’’ post-doctoral contract awarded by MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coal combustion via Chemical Looping assisted by Oxygen Uncoupling with a manganese‑iron mixed oxide doped with titanium

  • Pérez-Vega, Raúl
  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Diego Poza, Luis F. de
  • Adánez Elorza, Juan
10 Figures, 4 Tables.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Chemical looping combustion allows the carbon dioxide capture by using an oxygen carrier, which transports the oxygen required for combustion from the air to the fuel. But complete combustion of a solid fuel is not achieved when low cost materials were used as oxygen carriers. Manganese‑iron mixed oxide doped with titanium has been identified as a promising oxygen carrier to improve combustion efficiency due to its oxygen uncoupling capability. The objective of this work was to assess the potential of this oxygen carrier when burning coal in a chemical looping unit. The coal combustion efficiency and carbon dioxide capture were evaluated as a function of the operating conditions both in the fuel and air reactor. Carbon dioxide capture was affected by the solids residence time in the fuel reactor. Coal combustion efficiency increased as the oxygen uncoupling capability was enhanced by using suitable operating conditions in the air reactor. Almost full coal combustion (99.4%) was achieved by setting an air reactor temperature of 880 °C, an air excess of 1.8, a fuel reactor temperature of 925 °C, and an oxygen carrier to fuel ratio >3. The oxygen carrier showed magnetic properties, allowing its re-use after being separated from ash., This work was partially supported by the project ENE2016-77982-R (AEI/FEDER, UE) and project ENE2017-89473R (AEI/FEDER, UE), and by the Consejo Superior de Investigaciones Científicas (CSIC project: 2017-80E035)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Kinetics of CaMn0.775Ti0.125Mg0.1O2.9-δ perovskite prepared at industrial scale and its implication on the performance of chemical looping combustion of methane

  • Abad Secades, Alberto
  • Cabello Flores, Arturo
  • Gayán Sanz, Pilar
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Mendiara, Teresa
  • Adánez Elorza, Juan
17 figures, 6 tables.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The reaction kinetics of CaMn0.775Ti0.125Mg0.1O2.9-δ perovskite, prepared at ton-scale to be used as an oxygen carrier in a CLC process with methane, was determined. The variation of the reaction rates, oxygen transport capacity, and oxygen uncoupling behaviour of the selected material with the number of cycles was evaluated in a thermogravimetric analyser. The perovskite was activated for the reduction reaction with all the combustible gases, i.e., H2, CO and CH4. On the contrary, the oxidation rate barely changed throughout the cycles. The oxygen transport capacity underwent a slight decrease during the activation period. Kinetics of reduction, oxidation and oxygen uncoupling reactions were determined for the fresh and activated material assuming a grain model controlled by chemical reaction at low values of solids conversion and diffusion through the product layer at high values of solids conversion. This model predicted correctly the solids conversion vs. time curves as a function of temperature and gas concentration for the oxygen carrier reactions evaluated in this kinetics study. The kinetics data were introduced in a validated mathematical model of a fuel reactor to analyse the amount of solids required to fully combust CH4. A solids inventory of 350 kg/MWth was estimated in the fuel reactor at a temperature of 1243 K. However, this value could be reduced to 160 kg/MWth if the material operates under activation conditions within the CLC unit., This work was partially supported by the project ENE2016-77982-R (AEI/FEDER, UE), ENE2017-89473-R (AEI/FEDER, UE) and the SUCCESS Project, funded by the European Commission under the Seventh Framework Programme (Grant agreement No. 608571 )., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of different strategies to improve the efficiency of coal conversion in a 50 kWth Chemical Looping combustion unit

  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • Pérez-Vega, Raúl
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Mendiara, Teresa
  • Izquierdo Pantoja, María Teresa
  • Adánez Elorza, Juan
6 Figures, 3 Tables.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Minerals or industrial waste materials are considered promising oxygen carriers for coal combustion through in-situ Gasification Chemical Looping Combustion (iG-CLC) process in order to maintain CO2 capture at low cost. Nevertheless, complete coal combustion to CO2 and H2O is usually not achieved and different solutions have been outlined to improve it. The aim of this work is to analyze the potential of two of these strategies: (1) using a more reactive oxygen carrier; and (2) to have two fuel reactors by feeding the coal into the carbon stripper. Coal combustion in a 50 kWth CLC unit was carried out using two oxygen carrier materials, namely Norwegian ilmenite and Tierga iron-ore. Also, an additional test was carried out feeding the coal directly into the carbon stripper of the CLC unit, in contrast with the conventional coal feeding to the fuel reactor. CO2 capture efficiency was barely affected by the type of oxygen carrier material, but slightly lower values were obtained when coal was fed to the carbon stripper. In contrast, coal combustion efficiency was enhanced by using the iron-ore material, with a potential decrease of the total oxygen demand of 40%, achieving a minimum value of total oxygen demand of 4.1%. Also, the total oxygen demand was decreased by 24% when coal was fed to the carbon stripper due to the improvement in the combustion of the volatiles in the fuel reactor. The combination of both strategies has high potential to maximize the coal combustion via iG-CLC process., This work was partially supported by the Ministerio de Economía y Competitividad (project ENE2014-56857-R), and by the projects ENE2016-77982 (AEI/FEDER, UE), and ENE2017-89473-R (AEI/FEDER, UE), by the Regional Aragon Government via the T05_17R research group funding and by the Consejo Superior de Investigaciones Científicas (CSIC project: 2017-80E035). T. Mendiara thanks for the “Ramón y Cajal” post-doctoral contract awarded by MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improving the oxygen demand in biomass CLC using manganese ores

  • Pérez-Astray, Antón
  • Mendiara, Teresa
  • Diego Poza, Luis F. de
  • Abad Secades, Alberto
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Adánez Elorza, Juan
11 Figures, 5 Tables.--© 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Negative Emission Technologies (NETs) should be implemented to reach the objectives set by the Paris Agreement to limit the average temperature increment to 2 °C. One of the options is the development of bioenergy with Carbon Capture and Storage (BECCS) technologies. In this sense, Chemical Looping Combustion (CLC) is one of the most efficient CO2 Capture technologies both from economical and energy points of view. In CLC, a solid oxygen carrier is used to transfer the oxygen from air to the fuel. In this work two manganese-based ores were used as oxygen carriers to burn three different types of biomass (pine sawdust and two Spanish agricultural residues) in a 0.5 kWth CLC continuous unit. Operational conditions were varied to evaluate their effect on the CO2 capture efficiency and the total oxygen demand of the process. Almost 100% of CO2 capture efficiency was reached working with pine sawdust as well as with almond shells. However, high values of total oxygen demand (10–20%) were found, which led to consider further technological solutions to increase the combustion efficiency. In this respect, fuel reactor outlet recycling was evaluated as an operational solution to reduce the oxygen demand with good results (about 30% reduction in the total oxygen demand value). NOx and tar formation from the CLC system were also evaluated. There were no NOx emissions during the experimental campaign and low tar content in the fuel reactor outlet gas was reached (0.3–3.2 g/Nm3), being naphthalene the major tar compound., This work was supported by ENE2017-89473-R AEI/FEDER, UE. A. Pérez-Astray thanks the Spanish Ministry of Economy and Competitiveness (MINECO) for the BES-2015-074651 pre-doctoral fellowship co-financed by the European Social Fund. T. Mendiara thanks for the “Ramón y Cajal” post-doctoral contract awarded by MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biomass Chemical Looping Gasification of pine wood using a synthetic Fe2O3/Al2O3 oxygen carrier in a continuous unit

  • Samprón, Iván
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Abad Secades, Alberto
  • Adánez Elorza, Juan
6 figures, 1 table.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Biomass Chemical Looping Gasification is a novel technology allowing high quality syngas production at autothermal conditions without CO2 emissions to the atmosphere and low tar generation. This work compiles gasification results corresponding to 38 h of continuous operation in a 1.5 kWth unit using pine wood as fuel and a synthetic Fe-based oxygen carrier, Fe20Al. The main operating conditions such as temperature (T = 820–940 °C), steam-to-biomass ratio (S/B = 0.05–0.65), and oxygen-to-biomass ratio (λ = 0.2–0.6) were analyzed at steady state conditions using a novel method for controlling oxygen in the process. A syngas composed by 37% H2, 21% CO, 34% CO2 and 7% CH4, and tars below 2 g/Nm3 could be obtained at autothermal conditions, leading to a syngas yield of 0.8 Nm3/kg dry biomass and a cold gas efficiency of 68%. The material maintained a high reactivity although some Fe lost was observed., This work was supported by ENE2017-89473-R AEI/FEDER, UE. I. Samprón thanks the Spanish Ministerio de Ciencia, Innovación y Universidades (MICIU) for the PRE-086217 pre-doctoral fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biomass chemical looping gasification for syngas production using ilmenite as oxygen carrier in a 1.5 kWth unit

  • Condori, Óscar
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Izquierdo Pantoja, María Teresa
  • Abad Secades, Alberto
  • Adánez Elorza, Juan
15 figures, 3 tables.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Biomass Chemical Looping Gasification, BCLG, is a promising technology that uses lattice oxygen instead of expensive gaseous oxygen for high quality syngas production without CO2 emissions. In this work, 55 h of continuous operation in a 1.5 kWth BCLG unit using ilmenite as oxygen carrier and pine wood as fuel is reported. A new method for controlling the oxygen used in the syngas production through the control of the oxygen fed into the air reactor was used by first time in BCLG with satisfactory results. This method allows analysing the isolated effect of each one of the operating conditions: gasification temperature, TFR, steam-to-biomass ratio, S/B, and oxygen-to-biomass ratio, λ. This last parameter, λ, was the main factor affecting syngas production efficiency. Considering the high unconverted hydrocarbons usually obtained, a product gas composed by 37–40 % CO2; 27–30% H2; 17–21% CO; 10–12% CH4; and 2–3% C2-C3 with a syngas yield of 0.65 Nm3/kg dry biomass could be obtained for autothermal conditions. Tar generation was in the range 1.4–3.0 g/kg dry biomass (1–2.5 g/Nm3 d.b.), being lower than that reported by other gasification technologies. Despite its high reduction state in BCLG, ilmenite exhibited a good behaviour since remained with high reactivity during operation and no agglomeration problems were produced. However, outward migration of Fe observed in ilmenite decreased lifetime by a half during CLG operation in relation to chemical looping combustion conditions., This work has been supported by the European Union's Horizon 2020 - Research and Innovation Framework Programme under grant agreement No 817841 (Chemical Looping gAsification foR sustAinable production of biofuels - CLARA), and by the AEI/FEDER, UE (ENE2017-89473R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of the redox capability of manganese‑titanium mixed oxides for thermochemical energy storage and chemical looping processes

  • Abad Secades, Alberto
  • Mendiara, Teresa
  • Izquierdo Pantoja, María Teresa
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Gayán Sanz, Pilar
  • Adánez Elorza, Juan
7 figures, 6 tables.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Manganese oxides are capable of releasing molecular oxygen and regenerate in air under determined conditions. This fact makes these materials interesting for applications in different areas, such as thermochemical energy storage processes, oxygen production by chemical looping air separation (CLAS) or CO2 capture-oriented processes, namely chemical looping combustion (CLC) or chemical looping with oxygen uncoupling (CLOU). In this work, the potential to release molecular oxygen and regenerate in air of different manganese‑titanium mixed oxides with mass fractions of titanium from 0 to 50%, were evaluated in a TGA apparatus. Besides, the reactivity of the mixed oxide samples to the main fuel gases (CO, H2 and CH4) has been also evaluated. Consecutive redox cycles have been performed at different temperatures (850 and 940 °C) using nitrogen during reduction and air in oxidation. The oxygen transport capacity as well as the rate index for oxygen uncoupling and gas-solid reactions have been determined and compared to that found for other materials reported in literature. Moreover, solid phase identification in the different mixed oxide samples by XRD has been addressed in order to determine the oxygen release/regeneration mechanism. Results show a great potential of these materials as low-cost and environmentally friendly oxygen carriers., This work was partially supported by the projects ENE2017-89473-R (AEI/FEDER, UE) and PID2019-106441RB-I00. T. Mendiara thanks for the “Ramón y Cajal” post-doctoral contract awarded by the Spanish Ministry of Economy and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the optimization of physical and chemical stability of a Cu/Al2O3 impregnated oxygen carrier for chemical looping combustion

  • Izquierdo Pantoja, María Teresa
  • García Labiano, Francisco
  • Abad Secades, Alberto
  • Cabello Flores, Arturo
  • Gayán Sanz, Pilar
  • Diego Poza, Luis F. de
  • Adánez Elorza, Juan
10 figures, 3 tables.-- Supplementary material available.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The objective of this study was to evaluate the effect of the chemical and thermal stress on the physical and chemical stability of a CuO/Al2O3 impregnated oxygen carrier during methane chemical looping combustion at high oxygen carrier to fuel ratios to ensure low solid conversion variations. The Cu-based particles were subjected to 130 h of operation in a 0.5 kWth chemical looping combustion unit burning CH4 at steady state and unchanged conditions. Two batches of particles were used to operate the fuel and air reactor either at 800 °C or 900 °C. A full solid characterization regarding crystalline compounds, oxidation state, ASTM attrition index, crushing strength and morphology analysis was carried out in order to investigate the physical and chemical stability of the oxygen carrier. Main conclusion derived from this research work is that the low oxygen carrier conversion variation allowed reducing the chemical stress and as consequence the copper loss from particles. However, the oxygen carrier was difficult to reoxidize at 900 °C due to the formation of CuAlO2. Operating at temperatures about 800 °C and at low solid conversion variation is proposed since copper loss was limited maintaining an adequate physical stability., This work has been supported by the projects AEI/FEDER, UE (ENE2017-89473-R) and PID2019-106441RB-I00/AEI/10.13039/501100011033), and by the Regional Aragon Government (T05_17R and LMP180–18)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Behavior of a manganese-iron mixed oxide doped with titanium in reducing the oxygen demand for CLC of biomass

  • Pérez-Astray, Antón
  • Mendiara, Teresa
  • Diego Poza, Luis F. de
  • Abad Secades, Alberto
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Adánez Elorza, Juan
7 figures, 5 tables.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Chemical Looping Combustion (CLC) is a promising carbon capture technology to contribute to the development of BioEnergy with Carbon Capture and Storage (BECCS) technologies. In CLC, the oxygen needed for combustion is supplied by a solid oxygen carrier. During the last years, intensive research has been conducted to identify potential oxygen carriers. Iron and manganese-based minerals allowed obtaining high CO2 capture efficiencies, but lower values for the combustion efficiency, that is, high oxygen demand values, due to the high content of volatiles in biomass. Manganese-iron mixed oxides doped with titanium possess the capability of releasing molecular oxygen under specific conditions which would enhance volatile conversion. The objective of the present work was to evaluate the potential of one of these materials ((Mn66Fe)-Ti7) to improve the combustion efficiency of CLC with biomass in a 0.5 kWth continuous CLC unit. Almost 100% of CO2 capture efficiency was obtained in all the experiments. Once the operational conditions for the synthetic material (Mn66Fe)-Ti7 were optimized, it was possible to reach oxygen demand values about 10% with the advantage that the (Mn66Fe)-Ti7 oxygen carrier presented magnetic properties that would facilitate its separation from biomass ashes in the fuel reactor., This work was supported by ENE2017-89473-R AEI/FEDER, UE. A. Pérez-Astray thanks the Spanish Ministry of Economy and Competitiveness (MINECO) for the BES-2015-074651 pre-doctoral fellowship co-financed by the European Social Fund. T. Mendiara thanks for the “Ramón y Cajal” post-doctoral contract awarded by MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of synthesis gas production in the biomass chemical looping gasification process operating under auto-thermal conditions

  • Samprón, Iván
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
12 figures, 2 tables.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Biomass Chemical Looping Gasification (BCLG) is a promising route to obtain N2 free high purity syngas. In this work, heat and mass balances were solved to determine the auto-thermal operation conditions that maximize the syngas yield in a BCLG system. A Fe-based oxygen carrier and pine wood as fuel were considered for the simulation. Two methods to control the transference of oxygen between the air reactor (AR) and fuel reactor (FR) were analysed. Syngas yield was higher controlling the oxygen fed to the AR by the air flow (OCM-1) than controlling the oxygen supplied to the FR by the oxygen carrier circulation flow (OCM-2). The influence of different operating parameters, such as oxygen carrier transport capacity, preheating of gases fed to the system, steam/biomass ratio, fuel reactor temperature, was also analysed. It is noteworthy that working with OCM-2 it is necessary to optimize the amount of active phase in synthetic oxygen carriers or to dilute the natural oxygen carriers (ores, wastes) with an inert material to maintain realistic temperature difference values between reactors. Therefore, it is recommended to operate with the OCM-1 as it has the advantages of a more flexible operation and the possibility of obtaining pure N2., This work was supported by ENE2017-89473-R AEI/FEDER, UE. I. Samprón thanks the Spanish Ministerio de Ciencia, Innovación y Universidades (MICIU) for the pre-doctoral fellowship (Ref: PRE-086217)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Air jet attrition measurements at hot conditions of oxygen carriers for chemical looping combustion

  • Mendiara, Teresa
  • García Labiano, Francisco
  • Abad Secades, Alberto
  • Knittler, D.
  • Kim, Jun Young
  • Ellis, Naoko
11 figures, 3 tables.-- Supplementary information available., The attrition behaviour of several promising oxygen carriers tested in Chemical Looping Combustion (CLC) units has been evaluated using an air-jet apparatus based on ASTM D5757 at 20 and 800 °C. Results were evaluated to determine a general testing procedure that allows estimating the adequacy at working temperature of a potential oxygen carrier. For both fresh and used oxygen carriers, attrition was lower when the temperature of the Air Jet attrition Index (AJI) test was increased. Thus, tests with potential oxygen carriers must be performed close to the temperature they are planned to be used to obtain reliable information. Results indicated that used oxygen carriers with AJI value at hot conditions between 1 and 2% showed long lifetimes under continuous CLC operation., This work was supported by the Spanish National Research Council (CSIC) through the international collaboration project i-LINK+ 1225. The authors would also thank the support of the European Regional Development Fund (ERDF) under the program “Programa Operativo FEDER Aragón 2014-2020 - Construyendo Europa desde Aragón: Proyecto BiosinCO2 (LMP180_18)” and of the ENE2017-89473-R AEI/FEDER, UE. T. Mendiara thanks for the “Ramón y Cajal” post-doctoral contract awarded by the Spanish Ministry of Economy and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Syngas production in a 1.5 kWth biomass chemical looping gasification unit using Fe and Mn ores as the oxygen carrier

  • Condori, Óscar
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Abad Secades, Alberto
  • Adánez Elorza, Juan
12 figures.-- This article is part of the 2021 Pioneers in Energy Research: Javier Bilbao special issue., Biomass chemical looping gasification (BCLG) uses lattice oxygen from an oxygen carrier instead of gaseous oxygen for high-quality syngas production without CO2 emissions. In this work, the effect of the main operating variables, such as oxygen/biomass ratio (λ), gasification temperature, and steam/biomass ratio (S/B), was investigated using two low-cost materials: a Fe ore and a Mn ore. Oxygen fed to the air reactor for oxidation was used as an effective method for controlling the amount of lattice oxygen used for syngas production. The main variable that affected the process performance and the syngas quality was λ, while the fuel reactor temperature and the S/B ratio had a minor effect. Small performance differences found between the ores can be attributed to different degrees of CH4 and light hydrocarbons reforming in the process. The CO2 content in the syngas was high (40 −43%) under autothermal conditions because the gasification reactions required the heat to be generated by combustion. CH4 contents of around 10% were found in syngas, coming from the unburned or unreformed volatiles. Syngas yields around 0.60 Nm3/kg of dry biomass were found for both ores. Additionally, high biomass conversions (Xb > 94%) and carbon conversion efficiencies (ηcc > 95%) were obtained in all cases, showing the capability of the process of avoiding CO2 emissions to the atmosphere. No agglomeration was found in the bed during the BCLG process, although attrition rates were high, leading to lifetimes of 160 and 300 h for the manganese and iron ores, respectively. Migration of Fe or Mn to the external part of the particle, generating a metal concentrated shell, was observed. Its detachment was responsible for the decrease in the oxygen transport capacity (ROC) of the material with the operating time and the reduced lifetime. The results obtained here allowed the iron ore to be considered as an oxygen carrier suitable for the BCLG process., This work has been supported by the European Union’s Horizon 2020 Research and Innovation Framework Programme under grant Agreement 817841 [Chemical Looping Gasification for Sustainable Production of Biofuels (CLARA)] and the AEI/FEDER, UE (ENE2017-89473R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Qualification of operating conditions to extend oxygen carrier utilization in the scaling up of chemical looping processes

  • Cabello Flores, Arturo
  • Abad Secades, Alberto
  • Izquierdo Pantoja, María Teresa
  • Gayán Sanz, Pilar
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Adánez Elorza, Juan
16 figures, 5 tables.-- Supplementary information available., Chemical looping combustion (CLC) is a technology allowing CO2 capture at low cost. The development of durable oxygen carrier materials is a key factor for the scale-up of CLC. Once a promising oxygen carrier has been identified dedicated studies into the effects of reaction conditions on the durability of these kinds of materials are required in order to improve their reliability before use at industrial scale. This method requires several long-term tests in CLC units each one of them to fixed conditions, which is time consuming and expensive. In this work, a low-effort method using thermogravimetric analysis was developed and validated against a high-effort method requiring the use of an oxygen carrier material for hundreds of hours in a CLC unit. The reaction pathways and variation in physico-chemical properties of a material with 14 wt% CuO impregnated on γ-Al2O3 during the course of 300 redox cycles were evaluated as a function of reaction temperature, variation in oxygen carrier conversion (ΔXs) and degree of oxidation/reduction in every redox cycle. As a result, preferred conditions to be used in a CLC unit were identified. In general, reactivity and mechanical integrity were not affected when the reaction temperature was 800 °C. However, a temperature of 900 °C was found to be potentially suitable when the material was highly reduced in each redox cycle and ΔXs was low. The use of this method for promising oxygen carriers can boost the identification of long lasting materials for the scale-up of chemical looping processes., This work was funded by the State Research Agency of Spain (projects PID2019-106441RB-I00/AEI/10.13039/501100011033 and ENE2017-89473-R, AEI/FEDER, EU), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of the Fe content on the behavior of synthetic oxygen carriers in a 1.5 kW biomass chemical looping gasification unit

  • Samprón, Iván
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
11 figures, 3 tables.-- Supplementary data available., Biomass Chemical Looping Gasification (BCLG) is a promising technology that enables the production of high-purity and N2-free renewable syngas under autothermal operating conditions. In this work, the effect of the Fe-content (10, 20, and 25 wt% as Fe2O3) of three synthetic oxygen carriers supported on alumina was studied in a 1.5 kWth BCLG continuous unit. Similar syngas compositions and gasification parameters, biomass conversion, syngas yield, cold gas efficiency, etc., were obtained for the three oxygen carriers when analyzing the effect of oxygen-to-fuel ratio (λ) and fuel reactor (FR) temperature. Tars were also unaffected by the Fe-content, the increase in the FR temperature being the only parameter that allowed their reduction. A deep characterization of the oxygen carriers showed that the increase of Fe-content in the oxygen carrier promoted the migration of iron to the outer layer of particles, being detached of them. Lifetimes of 900, 350 and 100 h (corresponding to approximately 4500, 1750 and 500 cycles) were found for the oxygen carriers with 10 wt%, 20 wt% and 25 wt% of iron oxide, respectively. Therefore, among the three oxygen carrier tested, the one composed by a 10% of Fe2O3 was shown to be the most suitable for BCLG, providing the longest lifetime whereas the same syngas composition and tar removal could be obtained regardless of the Fe-content., This work was supported by ENE2017-89473-R AEI/FEDER, UE. I. Samprón thanks to the Spanish Ministerio de Ciencia, Innovación y Universidades (MICIU) for the PRE2018-086217 pre-doctoral fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biomass chemical looping gasification for syngas production using LD Slag as oxygen carrier in a 1.5 kWth unit

  • Condori, Óscar
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Izquierdo Pantoja, María Teresa
  • Abad Secades, Alberto
  • Adánez Elorza, Juan
12 figures, 3 tables., Biomass Chemical Looping Gasification (BCLG) is an autothermic gasification process that provides pure syngas for many applications, including liquid biofuels production. Finding low-cost materials that can be used in the process is a key issue, especially when they come from waste. In this sense, LD Slag is a by-product of the steel industry used as an oxygen carrier in Chemical Looping Combustion with good results. This work investigates the use of LD Slag as oxygen carrier in a continuous 1.5 kW BCLG unit. The effect of the main operational variables (temperature, oxygen-to-fuel and steam-to-biomass ratios) and the use of CO instead of steam as gasification agent were analysed. LD slag allowed the process with high biomass conversions, X > 90%, carbon conversion efficiencies, η > 90%, and syngas yields, Y ≈ 0.66 Nm/kg of dry biomass, at conditions corresponding to autothermal operation. A lifetime of 300 h under reducing conditions was inferred and agglomeration problems were never detected. LD slag can be considered a suitable material for BCLG since it is possible to obtain high-quality syngas at autothermal conditions from different types of biomass with low tar generation and CO emissions., This work has been supported by the European Union’s Horizon 2020-Research and Innovation Framework Programme under grant agreement No 817841 (Chemical Looping gAsification foR sustainable production of biofuels - CLARA), and by the AEI/FEDER, UE - ENE2017-89473-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel magnetic manganese-iron materials for separation of solids used in high-temperature processes: Application to oxygen carriers for chemical looping combustion

  • Abad Secades, Alberto
  • Pérez-Vega, Raúl
  • Izquierdo Pantoja, María Teresa
  • Gayán Sanz, Pilar
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Adánez Elorza, Juan
6 figures, 3 tables.-- Supplementary information available., Different chemical looping processes allow burning or gasify solid fuels with inherent CO2 capture because the oxygen is transferred from air to the fuel through a metal oxide based material, which is named oxygen carrier. To improve process efficiency and CO2 capture, highly reactive synthetic materials could be used. One of the challenges of using solid fuels is the oxygen carrier separation from the ash, because loss of oxygen carrier particles is expected during ash drainage. So, their costs would have necessary the recovery of the synthetic oxygen carrier. Mn-Fe based materials show magnetic properties in the spinel phase, which could be used for a magnetic separation. When these Mn-Fe materials are used at high temperature under oxidizing or reducing atmospheres, stability of the spinel phase should be guaranteed in order to take advantage of the magnetic properties. The design of low reactive Mn-Fe based materials with magnetic properties, which can be used as a support material for other highly reactive and active phases, was the main objective of this work. In this sense, the support must have high crushing strength, low reactivity under oxidation and reduction atmospheres at high temperatures and permanent magnetism at low temperature for solids separation. Materials prepared with different Mn/(Mn + Fe) molar ratios and calcination conditions were evaluated regarding mechanical strength, inerticity and magnetic properties. A Cu-based oxygen carrier prepared on the optimal support was prepared and evaluated along 240 oxidation-reduction cycles in thermobalance (25 h experiment), exhibiting suitable mechanical and magnetic characteristics as well as high reactivity., This work has been supported by the AEI/FEDER, UE ENE2016-77982-R, ENE2017-89473-R and ID2019-106441RB-I00 projects, and by the Regional Aragon Government via the T05_17R research group funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of an oxygen on the CH4 reforming reaction linked to the biomass chemical looping gasification process

  • Samprón, Iván
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Adánez Elorza, Juan
7 figures, 3 tables.-- This article is part of the 2022 Pioneers in Energy Research: Anders Lyngfelt special issue., A major challenge in biomass chemical looping gasification (BCLG) is the conversion of CH4 and light hydrocarbons to syngas (CO + H2) when the goal is the use for bioliquid fuel production. In this work, tests were performed in a batch fluidized bed reactor to determine the catalytic effect on the CH4 reforming reaction of oxygen carriers used in the BCLG process. Three ores (ilmenite, MnGB, and Tierga), one waste (LD slag), and five synthetic materials (Fe10Al, Fe20Al, Fe25Al, Cu14Al, and Ni18Al) were analyzed. These results were compared to those obtained during ∼300 h of continuous biomass gasification operation in a 1.5 kWth BCLG unit. The low-cost materials (ores and waste) did not show any catalytic effect in the CH4 reforming reaction, and as a consequence, the CH4 concentration values measured in the syngas produced in the continuous prototype were high. The synthetic oxygen carriers showed a catalytic effect in the CH4 reforming reaction, increasing this effect with increasing temperature. With the exception of the Ni-based oxygen carrier (used as a reference), the Cu-based oxygen carrier, working at 940 °C, showed the best catalytic properties, in good agreement with the low CH4 concentration values measured in the syngas generated in the continuous unit. The tests performed in a batch fluidized bed reactor were demonstrated to be very useful in determining the catalytic capacity of oxygen carriers in the CH4 reforming reaction. This fact is highly relevant when a syngas with a low CH4 content is desired as a final product., This work was supported by ENE2017-89473-R AEI/FEDER, UE, and the CO2SPLIT Project, Grant PID2020-113131RB-I00, funded by MICIN/AEI/10.13039/501100011033. Iván Samprón thanks the Spanish Ministerio de Ciencia, Innovación y Universidades (MICIU) for the PRE2018-086217 predoctoral fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessment of the chemical looping gasification of wheat straw pellets at the 20 kWth scale

  • Condori, Óscar
  • Abad Secades, Alberto
  • Izquierdo Pantoja, María Teresa
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Adánez Elorza, Juan
9 figures, 3 tables.-- Supplementary information available., In this work, the Biomass Chemical Looping Gasification (BCLG) process was evaluated for syngas production at the 20 kWth scale using wheat straw pellets as the fuel feedstock and ilmenite as the oxygen carrier. The effect of different operational variables –namely the fuel reactor temperature, the mean residence time of solids in the fuel reactor, the oxygen-to-biomass ratio (controlled by the oxygen fed into the air reactor) and the gas velocity in the carbon stripper– on the process performance and the syngas yield was analyzed. Interestingly, smooth operation of the CLG unit was observed and no agglomeration issues detected. In addition, char produced during devolatilization still retained its initial pellet shape and unconverted char pellets were elutriated from the fuel reactor mixed with the finer oxygen carrier particles. Both steady-state and transition periods were evaluated to have a complete overview of the process. Transition periods were characterized by a different oxygen transfer rate in the air and fuel reactors. Steady state was reached when the oxygen transference rate was the same in both reactors. In this sense, the oxygen transference rate in the fuel reactor was the main factor affecting the syngas yield and the cold gas efficiency. Also, the temperature and mean residence time of solids in the fuel reactor showed a considerable effect on the char conversion and, consequently, on the syngas yield. However, operating conditions hardly affected the production of light hydrocarbons (CH4 and C2-C3) and tar, which were maintained roughly constant throughout the experimental campaign., This work has been carried out in the framework of the European Union's Horizon 2020 – Research and Innovation Framework Programme under grant agreement No 817841 (Chemical Looping gsification foR sustainAble production of biofuels – CLARA), and by the AEI/FEDER, UE (ENE2017-89473R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An innovative Cu-Al oxygen carrier for the biomass chemical looping gasification process

  • Samprón, Iván
  • Cabello Flores, Arturo
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Diego Poza, Luis F. de
11 figures, 5 tables.-- Supplementary information available., Biomass chemical looping gasification (BCLG) is a novel technology that enables the production of renewable syngas without the need for an external supply of energy or power while achieving negative carbon emissions. In this work, the behavior of a synthetic Cu-based (14 wt% CuO) oxygen carrier, Cu14Al_ICB, was tested for 45 h in a 1.5 kWth continuous unit using pine sawdust as fuel. The effect of the oxygen-to-fuel ratio (λ) and gasification temperature on syngas composition and gasification parameters, including fuel conversion, carbon capture, cold gas efficiency, and syngas yield, was studied. A decrease in the oxygen-to-fuel ratio increased molar flows of H2 and CO in the syngas, while an increase in gasification temperature mainly improved char gasification, also enhancing H2 and CO generation. High amounts of syngas with low CH4 molar flows (∼2.3 mol CH4/kg of dry biomass) were obtained under any conditions due to the catalytic effect of metallic copper on CH4 reforming reactions. Syngas yield values were achieved approximating those obtained with Ni-based solids. The oxygen carrier also had a very positive effect on tar removal, reaching tar concentration values similar to those obtained by operating under chemical looping combustion conditions. The attrition rate measured with this oxygen carrier was the lowest obtained to date for any oxygen carrier operating under BCLG conditions. In addition, the mechanical properties, reactivity, and oxygen transport capacity of the oxygen carrier were maintained throughout the campaign. Therefore, the Cu14Al_ICB oxygen carrier has proved to be an excellent material for the BCLG process., This work was supported by ENE2017-89473-R AEI/FEDER, UE, and the CO2SPLIT Project, Grant PID2020-113131RB-I00, funded by MICIN/AEI/10.13039/501100011033. I. Samprón thanks the Spanish Ministerio de Ciencia, Innovación y Universidades (MICIU) for the PRE2018-086217 predoctoral fellowship. A. Cabello is grateful for Grant IJC2019-038908-I funded by MICIN/AEI/10.13039/501100011033., Peer reviewed
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Life cycle assessment of natural gas fuelled power plants based on chemical looping combustion technology

  • Navajas León, Alberto
  • Mendiara, Teresa
  • Goñi, Víctor
  • Jiménez, Adrián
  • Gandía Pascual, Luis
  • Abad, Alberto
  • García Labiano, Francisco
  • Diego, Luis F. de
Among the different Carbon Capture and Storage (CCS) technologies being developed in the last decades, Chemical Looping Combustion (CLC) stands out since it allows inherent CO2 capture. In the CLC process, there is a solid oxygen carrier circulating between two reactors in a cycle that allows providing the oxygen needed for combustion. In one of the reactors, named as fuel reactor, the fuel is introduced and combusted while the oxygen carrier reduction takes place. In the second reactor, named air reactor, the oxygen carrier is reoxidized in air. Different materials based on copper, nickel and iron oxides have been proposed as oxygen carriers for the CLC process. This work presents an environmental evaluation of the CLC process for natural gas based on Life Cycle Assessment (LCA). Five different oxygen carrier materials already tested in pilot plants were considered and the results compared to the conventional natural gas combustion in a gas turbine in a combined cycle without and with CO2 capture using postcombustion capture with amines. In view of the results, lower impact of the CLC process compared to the base case is expected without and with CO2 capture. The influence of several variables on the results was considered, such as temperature in the air reactor, lifetime of the oxygen carrier and possibility of recuperation of the depleted oxygen carrier. The nickel-based oxygen carriers were identified as the most adequate to be used in natural gas combustion. However, due to their toxicity, several analyses were also performed in order to identify improvements in the known oxygen carriers that can qualify them to replace nickel-based materials., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) [grant numbers ENE2017-89473-R, ENE2016-77982-R] and the European Regional Development Fund (ERDF) under the program 'Programa Operativo FEDER Aragón 2014-2020 - Construyendo Europa desde Aragón. Proyecto BiosinCO2 (LMP180_18)'.