Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 33
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Negative CO2 emissions through the use of biofuels in chemical looping technology: A review

  • Mendiara, Teresa
  • García Labiano, Francisco
  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • Diego Poza, Luis F. de
  • Izquierdo Pantoja, María Teresa
  • Adánez Elorza, Juan
15 Figures, 11 Tables.-- © 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, In order to limit the increase in the global average temperature to 2 °C or below, the Paris Agreement proposed the reduction of CO2 emissions throughout this century. Bioenergy with CO2 capture and storage (BECCS) technologies represent an interesting option in order to allow this goal to be metgoal, because they are able to achieve negative CO2 emissions. Chemical looping (CL) is recognized as one of the most innovative CO2 capture technologies owing to its low energy penalty. CL processes permit the utilization of renewable fuels in a nitrogen-free atmosphere, given that the required oxygen is supplied by solid oxygen carriers. The present work presents an overview of the status of development of the use of biofuels in chemical looping technologies, including chemical looping combustion (CLC) and chemical looping with oxygen uncoupling (CLOU) for the production of heat/electricity, as well as chemical looping reforming (CLR), chemical looping gasification (CLG) and chemical looping coupled with water splitting (CLWS) for syngas/H2 generation. The main milestones in the development of such processes are shown, and the future trends and opportunities for CL technology with biofuels are discussed., This work was supported by the Spanish Ministry of Economy, Industry and Competitiveness (projects ENE2014-56857-R, ENE2016-77982-R, and ENE2017-89473-R), the European Regional Development Fund (ERDF), the Spanish National Research Council -CSIC- (201780E035) and the Regional Government of Aragón (T05_17R). T. Mendiara is grateful for the “Ramón y Cajal” post-doctoral contract awarded by MINEICO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermochemical assessment of chemical looping assisted by oxygen uncoupling with a MnFe-based oxygen carrier

  • Abad Secades, Alberto
  • Pérez-Vega, Raúl
  • Diego Poza, Luis F. de
  • Gayán Sanz, Pilar
  • Izquierdo Pantoja, María Teresa
  • García Labiano, Francisco
  • Adánez Elorza, Juan
9 Figures, 6 Tables.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, A previously developed manganese-iron mixed oxide doped with TiO2 shows promising properties for the combustion of solid fuels with intrinsic CO2 capture by Chemical Lopping assisted by Oxygen Uncoupling (CLaOU) owing to its oxygen uncoupling capability, i.e. ability to generate gaseous oxygen at high temperature, and to oxidize gaseous fuels such as H2, CO or CH4 by reacting with lattice oxygen. In this work, a window of suitable operating conditions was determined to facilitate the use of this material in a CLaOU unit. For this purpose, mass and enthalpy balances were performed for the whole CLaOU unit considering theoretical values of thermochemical parameters, such as the equilibrium constant of relevant reactions in CLaOU and the formation enthalpies of reacting solids. An air reactor temperature of 1148 K and a high air excess ratio are suggested in order to promote the transfer of oxygen via the oxygen uncoupling mechanism, which would be preferable for the combustion of solid fuels. Auto-thermal operation of the CLaOU unit is guaranteed for air excess ratio values λ < 3. The fuel reactor temperature is highly influenced by the oxygen carrier-to-fuel ratio (ϕ) and the oxygen carrier regeneration in the air reactor. Assuming a 50–75% regeneration of the oxygen uncoupling capability, and ϕ = 4–6, the fuel reactor temperature would be between 35 and 50 K above the air reactor temperature. The higher temperature in the fuel reactor could promote the fuel conversion, while oxygen carrier regeneration would be guaranteed by the lower air reactor temperature., This work was partially supported by the Ministerio de Economía, Industria y Competitividad (Projects: ENE2016-77982-R and ENE2017-89473R), by the Fondo Europeo de Desarrollo Regional (FEDER), and by the Consejo Superior de Investigaciones Científicas (CSIC project: 2017-80E035)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Life cycle assessment of natural gas fuelled power plants based on chemical looping combustion technology

  • Navajas, A.
  • Mendiara, Teresa
  • Goñi, Víctor
  • Jiménez Loygorri, Adrián
  • Gandía, L. M.
  • Abad Secades, Alberto
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
11 Figuras, 2 Tablas.-- Material suplementario disponible en línea en la página web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Among the different Carbon Capture and Storage (CCS) technologies being developed in the last decades, Chemical Looping Combustion (CLC) stands out since it allows inherent CO2 capture. In the CLC process, there is a solid oxygen carrier circulating between two reactors in a cycle that allows providing the oxygen needed for combustion. In one of the reactors, named as fuel reactor, the fuel is introduced and combusted while the oxygen carrier reduction takes place. In the second reactor, named air reactor, the oxygen carrier is reoxidized in air. Different materials based on copper, nickel and iron oxides have been proposed as oxygen carriers for the CLC process. This work presents an environmental evaluation of the CLC process for natural gas based on Life Cycle Assessment (LCA). Five different oxygen carrier materials already tested in pilot plants were considered and the results compared to the conventional natural gas combustion in a gas turbine in a combined cycle without and with CO2 capture using postcombustion capture with amines. In view of the results, lower impact of the CLC process compared to the base case is expected without and with CO2 capture. The influence of several variables on the results was considered, such as temperature in the air reactor, lifetime of the oxygen carrier and possibility of recuperation of the depleted oxygen carrier. The nickel-based oxygen carriers were identified as the most adequate to be used in natural gas combustion. However, due to their toxicity, several analyses were also performed in order to identify improvements in the known oxygen carriers that can qualify them to replace nickel-based materials., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) [grant numbers ENE2017-89473-R, ENE2016-77982-R] and the European Regional Development Fund (ERDF) under the program “Programa Operativo FEDER Aragón 2014-2020 - Construyendo Europa desde Aragón. Proyecto BiosinCO2 (LMP180_18)”. T. Mendiara thanks for the ‘‘Ramón y Cajal’’ post-doctoral contract awarded by MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coal combustion via Chemical Looping assisted by Oxygen Uncoupling with a manganese‑iron mixed oxide doped with titanium

  • Pérez-Vega, Raúl
  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Diego Poza, Luis F. de
  • Adánez Elorza, Juan
10 Figures, 4 Tables.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Chemical looping combustion allows the carbon dioxide capture by using an oxygen carrier, which transports the oxygen required for combustion from the air to the fuel. But complete combustion of a solid fuel is not achieved when low cost materials were used as oxygen carriers. Manganese‑iron mixed oxide doped with titanium has been identified as a promising oxygen carrier to improve combustion efficiency due to its oxygen uncoupling capability. The objective of this work was to assess the potential of this oxygen carrier when burning coal in a chemical looping unit. The coal combustion efficiency and carbon dioxide capture were evaluated as a function of the operating conditions both in the fuel and air reactor. Carbon dioxide capture was affected by the solids residence time in the fuel reactor. Coal combustion efficiency increased as the oxygen uncoupling capability was enhanced by using suitable operating conditions in the air reactor. Almost full coal combustion (99.4%) was achieved by setting an air reactor temperature of 880 °C, an air excess of 1.8, a fuel reactor temperature of 925 °C, and an oxygen carrier to fuel ratio >3. The oxygen carrier showed magnetic properties, allowing its re-use after being separated from ash., This work was partially supported by the project ENE2016-77982-R (AEI/FEDER, UE) and project ENE2017-89473R (AEI/FEDER, UE), and by the Consejo Superior de Investigaciones Científicas (CSIC project: 2017-80E035)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Chemical Looping Combustion of biomass with negative Co2 emissions

  • Pérez-Astray, Antón
xxi, 157 Pags.-- 76 Figuras. 17 Tablas.-- Tesis doctoral llevada a cabo para conseguir el grado de doctor en la Universidad de Zaragoza, 2020-02-13.-- Calificación Sobresaliente "cum laude"., [EN] CO2 emissions to the atmosphere became an important environmental problem because of the effect on the global warming and consequently, the climate change. The climate change challenge demands a commitment of combined strategies between global institutions, governments and citizens. To reach the objectives set in the Paris Agreement (2015), greenhouse gas emissions need to be reduced. No technology is currently able to achieve the necessary reductions in greenhouse gas emissions on its own. Biomass represents an interesting alternative fuel for heat and power production as a carbon dioxide-neutral fuel. Moreover, if the CO2 generated during biomass combustion process is captured then negative-CO2 emissions would be reached and these are named bioenergy with Carbon Capture and Storage (BECCS) technologies. Chemical Looping Combustion (CLC) came up as one of the most promising CO2 capture technologies thanks to the low energy penalty of the CO2 separation and therefore, low-cost. CLC technologies are based in two interconnected fluidized bed reactors without gas mixing. The combustion takes place in the fuel reactor where the oxygen is supplied by a solid oxygen carrier, normally metal oxides. After being reduced, the oxygen carrier goes to the air reactor without gas mixing between reactors where it is oxidized again in air, and it is able for a new redox cycle starts. The main objective of this thesis is to evaluate the biomass combustion with CLC technologies (bioCLC). The research plan covers studies different at different scales, starting at lab scale, through a 1 kWth pilot plant, to the continuous operation in a 20 kWth plant to demonstrate the viability and optimizing the operation range for different low-cost oxygen carriers and different types of biomass residues. Iron based ores as well as manganese ores has been pointed as promising oxygen carriers because of their reactivity and low cost. Under In Situ Gasification Chemical Looping Combustion (iG-CLC) mode, the performance of the process was studied focusing on the effect of different important operating variables in a 1 kWth CLC unit. Values about 100% of carbon capture efficiency with the three types of biomass were obtained using ores as oxygen carrier and the total oxygen demand was reduced because of the different reactivity of each oxygen carrier and the operating conditions optimization. Also a synthetic iron-manganese mixed able to release molecular oxygen during the CLC process was used. The effect of the several operating variables was also studied finding a high dependency on the air excess and the temperature, both in the air reactor, on the CO2 capture efficiency and the total oxygen demand. About 100% of CO2 capture efficiency achieving values of total oxygen demand about 5%. The use of a mixed Cu-Mn oxide was also studied as a Chemical Looping with Oxygen Uncoupling (CLOU) oxygen carrier. High CO2 capture efficiencies were obtained and close to null total oxygen demand was achieved. The effect of the operating conditions on the performance of CLC was evaluated in a 20 kWth CLC unit using an iron ore as oxygen carrier. A Spanish biomass residue was tested achieving values close to 100% and total oxygen demands between 15-20% despite the low temperature used, supporting the consideration of the CLC process with biomass (bioCLC) as a promising bioenergy with Carbon Capture (BECCS) technology. One of the aspects to be considered in the combustion of biomass is the formation of NOx and the possible existence of tar in the gaseous product stream. This work compares the results obtained with two different chemical looping combustion modes, iG-CLC and CLOU. All these results show the feasibility of the integration of solid biofuels with CLC technologies achieving a negative emission technology able to produce an energy gain through a BECCS technology., [ES] Las emisiones de CO2 a la atmósfera se han convertido en un importante problema ambiental debido al calentamiento global y el consecuente cambio climático. El reto del cambio climático hace necesaria la aplicación de estrategias combinadas entre instituciones, gobiernos y ciudadanos. Para alcanzar los objetivos fijados en el Acuerdo de París (2015) es necesario reducir las emisiones de gases de efecto invernadero y actualmente ninguna tecnología es capaz de alcanzar los objetivos de reducción por si sola. La biomasa representa una interesante alternativa como combustible con emisiones neutras de CO2. Así mismo, si el CO2 generado durante la combustión de biomasa es capturado para su almacenamiento, se pueden alcanzar emisiones negativas de CO2 a través de la bioenergía con captura y almacenamiento de CO2. La combustión mediante transportadores de oxígeno destaca como una de las tecnologías de captura de CO2 más prometedoras gracias a la baja penalización energética debida a la separación del CO2, y su consecuente bajo coste. La combustión mediante transportadores sólidos de oxígeno se basa en la utilización de reactores de lecho fluidizado. La combustión tiene lugar en el reactor de reducción, donde el transportador sólido de oxígeno, normalmente un óxido metálico, se reduce. Después de reducirse, el transportador de oxígeno llega al reactor de oxidación, donde se vuelve a oxidar en aire para comenzar un nuevo ciclo redox. El principal objetivo de esta tesis es evaluar el potencial de las tecnologías de combustión mediante transportadores sólidos de oxígeno con biomasa. El plan de investigación incluye estudios a diferentes escalas, comenzando a nivel de laboratorio, continuando con planta piloto de 1 kWt y finalizando con la operación en continuo de una planta de 20 kWt para demostrar la viabilidad y optimizar los rangos de operación para el uso de distintos transportadores de oxígeno. Algunos minerales basados en hierro, así como otros basados en manganeso, han sido seleccionados por su alta reactividad y bajo coste. En la planta 1 kWt se viii estudió el efecto de distintas variables de operación sobre el funcionamiento del proceso bajo In Situ Gasification Chemical Looping Combustion (iG-CLC). Se alcanzaron valores en torno al 100% de eficacia de captura de CO2 con los tres tipos de biomasa estudiados usando minerales como transportadores de oxígeno, y las demandas totales de oxígeno se redujeron mediante la sustitución del transportador de oxígeno por otros más reactivos, así como por la optimización de diferentes variables de operación. También se ha probado un óxido sintético mixto basado en hierro y manganeso con capacidad de liberar oxígeno molecular durante el proceso de combustión. En este caso se estudió también el efecto de distintas variables de operación sobre la eficacia de captura de CO2 y la demanda total de oxígeno, encontrando una gran dependencia tanto de la temperatura como del exceso de aire, ambos en el reactor de oxidación. Se alcanzaron valores en torno al 100% de eficacia de captura de CO2 con demandas totales de oxígeno alrededor del 5%. El uso de un óxido mixto basado en cobre y manganeso ha sido estudiado también bajo el proceso conocido como Chemical Looping with Oxygen Uncoupling (CLOU). En este caso se alcanzaron altos valores de eficacia de captura de CO2 y demandas totales de oxígeno próximas a cero. En la planta de 20 kWt, se estudió el efecto de diferentes variables de operación utilizando un mineral de hierro como transportador de oxígeno. En esta planta se alcanzaron valores de demanda próximas al 100% y demandas totales de oxígeno en torno al 15-20% pese a las bajas temperaturas usadas. Otros de los aspectos a ser considerados en la combustión de biomasa es la formación de NOx y la posible presencia de alquitranes en la corriente gaseosa de salida. En este trabajo se comparan los resultados obtenidos mediante dos modos de operación, iG-CLC y CLOU. Todos estos resultados muestran las posibilidades de integración de biocombustibles sólidos con las tecnologías de combustión mediante transportadores de oxígeno consiguiendo una tecnología de emisiones negativas de CO2, capaz de producir un beneficio energético., The author thanks the Spanish Ministry of Economy and Competitiveness (MINECO) for the funding received from the projects ENE2014-56857-R and ENE2017-89473-R AEI/FEDER UE for the financial support. A. Pérez-Astray thanks MINECO for the BES-2015-074651 pre-doctoral fellowship co-financed by the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Biomass combustion with CO2 capture in a 20 kWth CLC plant

  • Pérez-Astray, Antón
  • Pérez-Vega, Raúl
  • Mendiara, Teresa
  • Diego Poza, Luis F. de
  • Abad Secades, Alberto
  • García Labiano, Francisco
  • Gayán Sanz, Pilar
  • Izquierdo Pantoja, María Teresa
  • Adánez Elorza, Juan
Presentado en las XXXVI Jornadas Nacionales de Ingeniería Química, JNIQ 2019, Zaragoza, 4-6 Sep. 2019., Bioenergy with Carbon Capture and Storage (BECCS) represents an interesting option to achieve the negative CO2 emissions needed to comply with the climate challenges set in the Paris Agreement (COP21-2015). Chemical Looping Combustion (CLC) technology has revealed as one of the CO2 capture technologies with less energy penalty and lower cost. CLC combined with biomass could become a promising BECCS technology. The objective of this work was to asses the feasibility of the CLC technology using biomass as fuel as a future BECCS technology., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO Projects: ENE2014-56857-R, ENE2016-77982-R and ENE2017-89473-R) and European Regional Development Fund (ERDF). A. Pérez-Astray thanks MINECO for the BES-2015-074651 co-financed by the European Social Fund. T. Mendiara thanks for the “Ramón y Cajal” post-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Combustión de biomasa sin emisión de CO2 en una planta de 20 kW

  • Pérez-Astray, Antón
  • Pérez-Vega, Raúl
  • Mendiara, Teresa
  • Diego Poza, Luis F. de
  • Abad Secades, Alberto
  • García Labiano, Francisco
  • Gayán Sanz, Pilar
  • Izquierdo Pantoja, María Teresa
  • Adánez Elorza, Juan
1 Figura, 2 Tablas.-- Presentado en las XXXVI Jornadas Nacionales de Ingeniería Química, JNIQ 2019, Zaragoza, 4-6 Sep. 2019., El Acuerdo de París fijó el objetivo de limitar en 2 ºC el incremento de temperatura media global sobre los valores preindustriales. Para tal efecto, el IPCC señala a la bioenergía con captura y almacenamiento de CO2 (BECCS en inglés) como una de las tecnologías clave para reducir el impacto del cambio climático pudiendo alcanzarse emisiones negativas de CO2. La implementación de biocombustibles en las tecnologías tradicionales de captura de CO2 implica un alto coste energético del combustible obteniendo una corriente de CO2 prácticamente puro con uno de los menores costes energéticos asociados. El proceso se basa en la utilización de un transportador de oxígeno (TO), normalmente un óxido metálico, que al transportar el oxígeno del reactor de oxidación al de reducción, evita la mezcla del oxígeno del aire y los gases de combustión, evitando de este modo la aplicación de un proceso de separación de gases. En este trabajo se evaluó en una planta piloto de 20 kW de potencia, el efecto de las principales variables de operación bajo condiciones de In situ Gasification-CLC como son la circulación de sólidos, el tipo de agente gasificante y el inventario específico de sólidos en el reactor de reducción sobre los principales parámetros de rendimiento del proceso como son la eficacia de captura de CO2 y la demanda total de oxígeno., Trabajo financiado por el MINECO (ENE2014-56857-R, ENE2016-77982-R, ENE2017-89473-R) y por FEDER. A. Pérez-Astray agradece la beca predoctoral BES-2015-074651., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Kinetics of CaMn0.775Ti0.125Mg0.1O2.9-δ perovskite prepared at industrial scale and its implication on the performance of chemical looping combustion of methane

  • Abad Secades, Alberto
  • Cabello Flores, Arturo
  • Gayán Sanz, Pilar
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Mendiara, Teresa
  • Adánez Elorza, Juan
17 figures, 6 tables.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The reaction kinetics of CaMn0.775Ti0.125Mg0.1O2.9-δ perovskite, prepared at ton-scale to be used as an oxygen carrier in a CLC process with methane, was determined. The variation of the reaction rates, oxygen transport capacity, and oxygen uncoupling behaviour of the selected material with the number of cycles was evaluated in a thermogravimetric analyser. The perovskite was activated for the reduction reaction with all the combustible gases, i.e., H2, CO and CH4. On the contrary, the oxidation rate barely changed throughout the cycles. The oxygen transport capacity underwent a slight decrease during the activation period. Kinetics of reduction, oxidation and oxygen uncoupling reactions were determined for the fresh and activated material assuming a grain model controlled by chemical reaction at low values of solids conversion and diffusion through the product layer at high values of solids conversion. This model predicted correctly the solids conversion vs. time curves as a function of temperature and gas concentration for the oxygen carrier reactions evaluated in this kinetics study. The kinetics data were introduced in a validated mathematical model of a fuel reactor to analyse the amount of solids required to fully combust CH4. A solids inventory of 350 kg/MWth was estimated in the fuel reactor at a temperature of 1243 K. However, this value could be reduced to 160 kg/MWth if the material operates under activation conditions within the CLC unit., This work was partially supported by the project ENE2016-77982-R (AEI/FEDER, UE), ENE2017-89473-R (AEI/FEDER, UE) and the SUCCESS Project, funded by the European Commission under the Seventh Framework Programme (Grant agreement No. 608571 )., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of different strategies to improve the efficiency of coal conversion in a 50 kWth Chemical Looping combustion unit

  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • Pérez-Vega, Raúl
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Mendiara, Teresa
  • Izquierdo Pantoja, María Teresa
  • Adánez Elorza, Juan
6 Figures, 3 Tables.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Minerals or industrial waste materials are considered promising oxygen carriers for coal combustion through in-situ Gasification Chemical Looping Combustion (iG-CLC) process in order to maintain CO2 capture at low cost. Nevertheless, complete coal combustion to CO2 and H2O is usually not achieved and different solutions have been outlined to improve it. The aim of this work is to analyze the potential of two of these strategies: (1) using a more reactive oxygen carrier; and (2) to have two fuel reactors by feeding the coal into the carbon stripper. Coal combustion in a 50 kWth CLC unit was carried out using two oxygen carrier materials, namely Norwegian ilmenite and Tierga iron-ore. Also, an additional test was carried out feeding the coal directly into the carbon stripper of the CLC unit, in contrast with the conventional coal feeding to the fuel reactor. CO2 capture efficiency was barely affected by the type of oxygen carrier material, but slightly lower values were obtained when coal was fed to the carbon stripper. In contrast, coal combustion efficiency was enhanced by using the iron-ore material, with a potential decrease of the total oxygen demand of 40%, achieving a minimum value of total oxygen demand of 4.1%. Also, the total oxygen demand was decreased by 24% when coal was fed to the carbon stripper due to the improvement in the combustion of the volatiles in the fuel reactor. The combination of both strategies has high potential to maximize the coal combustion via iG-CLC process., This work was partially supported by the Ministerio de Economía y Competitividad (project ENE2014-56857-R), and by the projects ENE2016-77982 (AEI/FEDER, UE), and ENE2017-89473-R (AEI/FEDER, UE), by the Regional Aragon Government via the T05_17R research group funding and by the Consejo Superior de Investigaciones Científicas (CSIC project: 2017-80E035). T. Mendiara thanks for the “Ramón y Cajal” post-doctoral contract awarded by MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improving the oxygen demand in biomass CLC using manganese ores

  • Pérez-Astray, Antón
  • Mendiara, Teresa
  • Diego Poza, Luis F. de
  • Abad Secades, Alberto
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Adánez Elorza, Juan
11 Figures, 5 Tables.--© 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Negative Emission Technologies (NETs) should be implemented to reach the objectives set by the Paris Agreement to limit the average temperature increment to 2 °C. One of the options is the development of bioenergy with Carbon Capture and Storage (BECCS) technologies. In this sense, Chemical Looping Combustion (CLC) is one of the most efficient CO2 Capture technologies both from economical and energy points of view. In CLC, a solid oxygen carrier is used to transfer the oxygen from air to the fuel. In this work two manganese-based ores were used as oxygen carriers to burn three different types of biomass (pine sawdust and two Spanish agricultural residues) in a 0.5 kWth CLC continuous unit. Operational conditions were varied to evaluate their effect on the CO2 capture efficiency and the total oxygen demand of the process. Almost 100% of CO2 capture efficiency was reached working with pine sawdust as well as with almond shells. However, high values of total oxygen demand (10–20%) were found, which led to consider further technological solutions to increase the combustion efficiency. In this respect, fuel reactor outlet recycling was evaluated as an operational solution to reduce the oxygen demand with good results (about 30% reduction in the total oxygen demand value). NOx and tar formation from the CLC system were also evaluated. There were no NOx emissions during the experimental campaign and low tar content in the fuel reactor outlet gas was reached (0.3–3.2 g/Nm3), being naphthalene the major tar compound., This work was supported by ENE2017-89473-R AEI/FEDER, UE. A. Pérez-Astray thanks the Spanish Ministry of Economy and Competitiveness (MINECO) for the BES-2015-074651 pre-doctoral fellowship co-financed by the European Social Fund. T. Mendiara thanks for the “Ramón y Cajal” post-doctoral contract awarded by MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

CO2 capture by Chemical Looping Processes using C-fuels

  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Diego Poza, Luis F. de
  • Gayán Sanz, Pilar
  • Abad Secades, Alberto
  • Mendiara, Teresa
  • Adánez Elorza, Juan
1 figure.-- Work presented at the Carbon 2018 ´"The World Conference of Carbon", Madrid (Spain), 01st-6th July, According to the IPCC, warming of the climate system is unequivocal and this is mainly consequence of the increase in the CO2 concentration in the atmosphere. In addition, “Human influence on the climate system is clear, and recent anthropogenic emissions of greenhouse gases are the highest in history”. These emissions are mainly consequence of the burning of C-fuels, mostly fossil fuels, which result in a net increase in carbon concentration in the atmosphere, soil and oceans. In fact, the natural carbon cycle in the earth is being affected. Limiting climate change would require substantial and sustained reductions in greenhouse gas emissions. The measures considered for the reduction of CO2 emissions to the atmosphere include the improvement in the use and generation of energy, the use of nuclear energy, the boost of energy generation from renewable sources and the CO2 capture and storage (CCS)., This work was supported by the Spanish Ministry of Economy, Industry and Competitiveness (projects ENE2014-56857-R, ENE2016-77982-R, and ENE2017-89473-R), by the European Regional Development Fund (ERDF), by the CSIC (201780E035), and by the Government of Aragón. T. Mendiara thanks for the “Ramón y Cajal” post-doctoral contract awarded by MINEICO.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biomass Chemical Looping Gasification of pine wood using a synthetic Fe2O3/Al2O3 oxygen carrier in a continuous unit

  • Samprón, Iván
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Abad Secades, Alberto
  • Adánez Elorza, Juan
6 figures, 1 table.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Biomass Chemical Looping Gasification is a novel technology allowing high quality syngas production at autothermal conditions without CO2 emissions to the atmosphere and low tar generation. This work compiles gasification results corresponding to 38 h of continuous operation in a 1.5 kWth unit using pine wood as fuel and a synthetic Fe-based oxygen carrier, Fe20Al. The main operating conditions such as temperature (T = 820–940 °C), steam-to-biomass ratio (S/B = 0.05–0.65), and oxygen-to-biomass ratio (λ = 0.2–0.6) were analyzed at steady state conditions using a novel method for controlling oxygen in the process. A syngas composed by 37% H2, 21% CO, 34% CO2 and 7% CH4, and tars below 2 g/Nm3 could be obtained at autothermal conditions, leading to a syngas yield of 0.8 Nm3/kg dry biomass and a cold gas efficiency of 68%. The material maintained a high reactivity although some Fe lost was observed., This work was supported by ENE2017-89473-R AEI/FEDER, UE. I. Samprón thanks the Spanish Ministerio de Ciencia, Innovación y Universidades (MICIU) for the PRE-086217 pre-doctoral fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biomass chemical looping gasification for syngas production using ilmenite as oxygen carrier in a 1.5 kWth unit

  • Condori, Óscar
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Izquierdo Pantoja, María Teresa
  • Abad Secades, Alberto
  • Adánez Elorza, Juan
15 figures, 3 tables.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Biomass Chemical Looping Gasification, BCLG, is a promising technology that uses lattice oxygen instead of expensive gaseous oxygen for high quality syngas production without CO2 emissions. In this work, 55 h of continuous operation in a 1.5 kWth BCLG unit using ilmenite as oxygen carrier and pine wood as fuel is reported. A new method for controlling the oxygen used in the syngas production through the control of the oxygen fed into the air reactor was used by first time in BCLG with satisfactory results. This method allows analysing the isolated effect of each one of the operating conditions: gasification temperature, TFR, steam-to-biomass ratio, S/B, and oxygen-to-biomass ratio, λ. This last parameter, λ, was the main factor affecting syngas production efficiency. Considering the high unconverted hydrocarbons usually obtained, a product gas composed by 37–40 % CO2; 27–30% H2; 17–21% CO; 10–12% CH4; and 2–3% C2-C3 with a syngas yield of 0.65 Nm3/kg dry biomass could be obtained for autothermal conditions. Tar generation was in the range 1.4–3.0 g/kg dry biomass (1–2.5 g/Nm3 d.b.), being lower than that reported by other gasification technologies. Despite its high reduction state in BCLG, ilmenite exhibited a good behaviour since remained with high reactivity during operation and no agglomeration problems were produced. However, outward migration of Fe observed in ilmenite decreased lifetime by a half during CLG operation in relation to chemical looping combustion conditions., This work has been supported by the European Union's Horizon 2020 - Research and Innovation Framework Programme under grant agreement No 817841 (Chemical Looping gAsification foR sustAinable production of biofuels - CLARA), and by the AEI/FEDER, UE (ENE2017-89473R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of the redox capability of manganese‑titanium mixed oxides for thermochemical energy storage and chemical looping processes

  • Abad Secades, Alberto
  • Mendiara, Teresa
  • Izquierdo Pantoja, María Teresa
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Gayán Sanz, Pilar
  • Adánez Elorza, Juan
7 figures, 6 tables.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Manganese oxides are capable of releasing molecular oxygen and regenerate in air under determined conditions. This fact makes these materials interesting for applications in different areas, such as thermochemical energy storage processes, oxygen production by chemical looping air separation (CLAS) or CO2 capture-oriented processes, namely chemical looping combustion (CLC) or chemical looping with oxygen uncoupling (CLOU). In this work, the potential to release molecular oxygen and regenerate in air of different manganese‑titanium mixed oxides with mass fractions of titanium from 0 to 50%, were evaluated in a TGA apparatus. Besides, the reactivity of the mixed oxide samples to the main fuel gases (CO, H2 and CH4) has been also evaluated. Consecutive redox cycles have been performed at different temperatures (850 and 940 °C) using nitrogen during reduction and air in oxidation. The oxygen transport capacity as well as the rate index for oxygen uncoupling and gas-solid reactions have been determined and compared to that found for other materials reported in literature. Moreover, solid phase identification in the different mixed oxide samples by XRD has been addressed in order to determine the oxygen release/regeneration mechanism. Results show a great potential of these materials as low-cost and environmentally friendly oxygen carriers., This work was partially supported by the projects ENE2017-89473-R (AEI/FEDER, UE) and PID2019-106441RB-I00. T. Mendiara thanks for the “Ramón y Cajal” post-doctoral contract awarded by the Spanish Ministry of Economy and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the optimization of physical and chemical stability of a Cu/Al2O3 impregnated oxygen carrier for chemical looping combustion

  • Izquierdo Pantoja, María Teresa
  • García Labiano, Francisco
  • Abad Secades, Alberto
  • Cabello Flores, Arturo
  • Gayán Sanz, Pilar
  • Diego Poza, Luis F. de
  • Adánez Elorza, Juan
10 figures, 3 tables.-- Supplementary material available.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The objective of this study was to evaluate the effect of the chemical and thermal stress on the physical and chemical stability of a CuO/Al2O3 impregnated oxygen carrier during methane chemical looping combustion at high oxygen carrier to fuel ratios to ensure low solid conversion variations. The Cu-based particles were subjected to 130 h of operation in a 0.5 kWth chemical looping combustion unit burning CH4 at steady state and unchanged conditions. Two batches of particles were used to operate the fuel and air reactor either at 800 °C or 900 °C. A full solid characterization regarding crystalline compounds, oxidation state, ASTM attrition index, crushing strength and morphology analysis was carried out in order to investigate the physical and chemical stability of the oxygen carrier. Main conclusion derived from this research work is that the low oxygen carrier conversion variation allowed reducing the chemical stress and as consequence the copper loss from particles. However, the oxygen carrier was difficult to reoxidize at 900 °C due to the formation of CuAlO2. Operating at temperatures about 800 °C and at low solid conversion variation is proposed since copper loss was limited maintaining an adequate physical stability., This work has been supported by the projects AEI/FEDER, UE (ENE2017-89473-R) and PID2019-106441RB-I00/AEI/10.13039/501100011033), and by the Regional Aragon Government (T05_17R and LMP180–18)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Behavior of a manganese-iron mixed oxide doped with titanium in reducing the oxygen demand for CLC of biomass

  • Pérez-Astray, Antón
  • Mendiara, Teresa
  • Diego Poza, Luis F. de
  • Abad Secades, Alberto
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Adánez Elorza, Juan
7 figures, 5 tables.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Chemical Looping Combustion (CLC) is a promising carbon capture technology to contribute to the development of BioEnergy with Carbon Capture and Storage (BECCS) technologies. In CLC, the oxygen needed for combustion is supplied by a solid oxygen carrier. During the last years, intensive research has been conducted to identify potential oxygen carriers. Iron and manganese-based minerals allowed obtaining high CO2 capture efficiencies, but lower values for the combustion efficiency, that is, high oxygen demand values, due to the high content of volatiles in biomass. Manganese-iron mixed oxides doped with titanium possess the capability of releasing molecular oxygen under specific conditions which would enhance volatile conversion. The objective of the present work was to evaluate the potential of one of these materials ((Mn66Fe)-Ti7) to improve the combustion efficiency of CLC with biomass in a 0.5 kWth continuous CLC unit. Almost 100% of CO2 capture efficiency was obtained in all the experiments. Once the operational conditions for the synthetic material (Mn66Fe)-Ti7 were optimized, it was possible to reach oxygen demand values about 10% with the advantage that the (Mn66Fe)-Ti7 oxygen carrier presented magnetic properties that would facilitate its separation from biomass ashes in the fuel reactor., This work was supported by ENE2017-89473-R AEI/FEDER, UE. A. Pérez-Astray thanks the Spanish Ministry of Economy and Competitiveness (MINECO) for the BES-2015-074651 pre-doctoral fellowship co-financed by the European Social Fund. T. Mendiara thanks for the “Ramón y Cajal” post-doctoral contract awarded by MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of synthesis gas production in the biomass chemical looping gasification process operating under auto-thermal conditions

  • Samprón, Iván
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
12 figures, 2 tables.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Biomass Chemical Looping Gasification (BCLG) is a promising route to obtain N2 free high purity syngas. In this work, heat and mass balances were solved to determine the auto-thermal operation conditions that maximize the syngas yield in a BCLG system. A Fe-based oxygen carrier and pine wood as fuel were considered for the simulation. Two methods to control the transference of oxygen between the air reactor (AR) and fuel reactor (FR) were analysed. Syngas yield was higher controlling the oxygen fed to the AR by the air flow (OCM-1) than controlling the oxygen supplied to the FR by the oxygen carrier circulation flow (OCM-2). The influence of different operating parameters, such as oxygen carrier transport capacity, preheating of gases fed to the system, steam/biomass ratio, fuel reactor temperature, was also analysed. It is noteworthy that working with OCM-2 it is necessary to optimize the amount of active phase in synthetic oxygen carriers or to dilute the natural oxygen carriers (ores, wastes) with an inert material to maintain realistic temperature difference values between reactors. Therefore, it is recommended to operate with the OCM-1 as it has the advantages of a more flexible operation and the possibility of obtaining pure N2., This work was supported by ENE2017-89473-R AEI/FEDER, UE. I. Samprón thanks the Spanish Ministerio de Ciencia, Innovación y Universidades (MICIU) for the pre-doctoral fellowship (Ref: PRE-086217)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Air jet attrition measurements at hot conditions of oxygen carriers for chemical looping combustion

  • Mendiara, Teresa
  • García Labiano, Francisco
  • Abad Secades, Alberto
  • Knittler, D.
  • Kim, Jun Young
  • Ellis, Naoko
11 figures, 3 tables.-- Supplementary information available., The attrition behaviour of several promising oxygen carriers tested in Chemical Looping Combustion (CLC) units has been evaluated using an air-jet apparatus based on ASTM D5757 at 20 and 800 °C. Results were evaluated to determine a general testing procedure that allows estimating the adequacy at working temperature of a potential oxygen carrier. For both fresh and used oxygen carriers, attrition was lower when the temperature of the Air Jet attrition Index (AJI) test was increased. Thus, tests with potential oxygen carriers must be performed close to the temperature they are planned to be used to obtain reliable information. Results indicated that used oxygen carriers with AJI value at hot conditions between 1 and 2% showed long lifetimes under continuous CLC operation., This work was supported by the Spanish National Research Council (CSIC) through the international collaboration project i-LINK+ 1225. The authors would also thank the support of the European Regional Development Fund (ERDF) under the program “Programa Operativo FEDER Aragón 2014-2020 - Construyendo Europa desde Aragón: Proyecto BiosinCO2 (LMP180_18)” and of the ENE2017-89473-R AEI/FEDER, UE. T. Mendiara thanks for the “Ramón y Cajal” post-doctoral contract awarded by the Spanish Ministry of Economy and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Syngas production in a 1.5 kWth biomass chemical looping gasification unit using Fe and Mn ores as the oxygen carrier

  • Condori, Óscar
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Abad Secades, Alberto
  • Adánez Elorza, Juan
12 figures.-- This article is part of the 2021 Pioneers in Energy Research: Javier Bilbao special issue., Biomass chemical looping gasification (BCLG) uses lattice oxygen from an oxygen carrier instead of gaseous oxygen for high-quality syngas production without CO2 emissions. In this work, the effect of the main operating variables, such as oxygen/biomass ratio (λ), gasification temperature, and steam/biomass ratio (S/B), was investigated using two low-cost materials: a Fe ore and a Mn ore. Oxygen fed to the air reactor for oxidation was used as an effective method for controlling the amount of lattice oxygen used for syngas production. The main variable that affected the process performance and the syngas quality was λ, while the fuel reactor temperature and the S/B ratio had a minor effect. Small performance differences found between the ores can be attributed to different degrees of CH4 and light hydrocarbons reforming in the process. The CO2 content in the syngas was high (40 −43%) under autothermal conditions because the gasification reactions required the heat to be generated by combustion. CH4 contents of around 10% were found in syngas, coming from the unburned or unreformed volatiles. Syngas yields around 0.60 Nm3/kg of dry biomass were found for both ores. Additionally, high biomass conversions (Xb > 94%) and carbon conversion efficiencies (ηcc > 95%) were obtained in all cases, showing the capability of the process of avoiding CO2 emissions to the atmosphere. No agglomeration was found in the bed during the BCLG process, although attrition rates were high, leading to lifetimes of 160 and 300 h for the manganese and iron ores, respectively. Migration of Fe or Mn to the external part of the particle, generating a metal concentrated shell, was observed. Its detachment was responsible for the decrease in the oxygen transport capacity (ROC) of the material with the operating time and the reduced lifetime. The results obtained here allowed the iron ore to be considered as an oxygen carrier suitable for the BCLG process., This work has been supported by the European Union’s Horizon 2020 Research and Innovation Framework Programme under grant Agreement 817841 [Chemical Looping Gasification for Sustainable Production of Biofuels (CLARA)] and the AEI/FEDER, UE (ENE2017-89473R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Qualification of operating conditions to extend oxygen carrier utilization in the scaling up of chemical looping processes

  • Cabello Flores, Arturo
  • Abad Secades, Alberto
  • Izquierdo Pantoja, María Teresa
  • Gayán Sanz, Pilar
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Adánez Elorza, Juan
16 figures, 5 tables.-- Supplementary information available., Chemical looping combustion (CLC) is a technology allowing CO2 capture at low cost. The development of durable oxygen carrier materials is a key factor for the scale-up of CLC. Once a promising oxygen carrier has been identified dedicated studies into the effects of reaction conditions on the durability of these kinds of materials are required in order to improve their reliability before use at industrial scale. This method requires several long-term tests in CLC units each one of them to fixed conditions, which is time consuming and expensive. In this work, a low-effort method using thermogravimetric analysis was developed and validated against a high-effort method requiring the use of an oxygen carrier material for hundreds of hours in a CLC unit. The reaction pathways and variation in physico-chemical properties of a material with 14 wt% CuO impregnated on γ-Al2O3 during the course of 300 redox cycles were evaluated as a function of reaction temperature, variation in oxygen carrier conversion (ΔXs) and degree of oxidation/reduction in every redox cycle. As a result, preferred conditions to be used in a CLC unit were identified. In general, reactivity and mechanical integrity were not affected when the reaction temperature was 800 °C. However, a temperature of 900 °C was found to be potentially suitable when the material was highly reduced in each redox cycle and ΔXs was low. The use of this method for promising oxygen carriers can boost the identification of long lasting materials for the scale-up of chemical looping processes., This work was funded by the State Research Agency of Spain (projects PID2019-106441RB-I00/AEI/10.13039/501100011033 and ENE2017-89473-R, AEI/FEDER, EU), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of the Fe content on the behavior of synthetic oxygen carriers in a 1.5 kW biomass chemical looping gasification unit

  • Samprón, Iván
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
11 figures, 3 tables.-- Supplementary data available., Biomass Chemical Looping Gasification (BCLG) is a promising technology that enables the production of high-purity and N2-free renewable syngas under autothermal operating conditions. In this work, the effect of the Fe-content (10, 20, and 25 wt% as Fe2O3) of three synthetic oxygen carriers supported on alumina was studied in a 1.5 kWth BCLG continuous unit. Similar syngas compositions and gasification parameters, biomass conversion, syngas yield, cold gas efficiency, etc., were obtained for the three oxygen carriers when analyzing the effect of oxygen-to-fuel ratio (λ) and fuel reactor (FR) temperature. Tars were also unaffected by the Fe-content, the increase in the FR temperature being the only parameter that allowed their reduction. A deep characterization of the oxygen carriers showed that the increase of Fe-content in the oxygen carrier promoted the migration of iron to the outer layer of particles, being detached of them. Lifetimes of 900, 350 and 100 h (corresponding to approximately 4500, 1750 and 500 cycles) were found for the oxygen carriers with 10 wt%, 20 wt% and 25 wt% of iron oxide, respectively. Therefore, among the three oxygen carrier tested, the one composed by a 10% of Fe2O3 was shown to be the most suitable for BCLG, providing the longest lifetime whereas the same syngas composition and tar removal could be obtained regardless of the Fe-content., This work was supported by ENE2017-89473-R AEI/FEDER, UE. I. Samprón thanks to the Spanish Ministerio de Ciencia, Innovación y Universidades (MICIU) for the PRE2018-086217 pre-doctoral fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biomass chemical looping gasification for syngas production using LD Slag as oxygen carrier in a 1.5 kWth unit

  • Condori, Óscar
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Izquierdo Pantoja, María Teresa
  • Abad Secades, Alberto
  • Adánez Elorza, Juan
12 figures, 3 tables., Biomass Chemical Looping Gasification (BCLG) is an autothermic gasification process that provides pure syngas for many applications, including liquid biofuels production. Finding low-cost materials that can be used in the process is a key issue, especially when they come from waste. In this sense, LD Slag is a by-product of the steel industry used as an oxygen carrier in Chemical Looping Combustion with good results. This work investigates the use of LD Slag as oxygen carrier in a continuous 1.5 kW BCLG unit. The effect of the main operational variables (temperature, oxygen-to-fuel and steam-to-biomass ratios) and the use of CO instead of steam as gasification agent were analysed. LD slag allowed the process with high biomass conversions, X > 90%, carbon conversion efficiencies, η > 90%, and syngas yields, Y ≈ 0.66 Nm/kg of dry biomass, at conditions corresponding to autothermal operation. A lifetime of 300 h under reducing conditions was inferred and agglomeration problems were never detected. LD slag can be considered a suitable material for BCLG since it is possible to obtain high-quality syngas at autothermal conditions from different types of biomass with low tar generation and CO emissions., This work has been supported by the European Union’s Horizon 2020-Research and Innovation Framework Programme under grant agreement No 817841 (Chemical Looping gAsification foR sustainable production of biofuels - CLARA), and by the AEI/FEDER, UE - ENE2017-89473-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel magnetic manganese-iron materials for separation of solids used in high-temperature processes: Application to oxygen carriers for chemical looping combustion

  • Abad Secades, Alberto
  • Pérez-Vega, Raúl
  • Izquierdo Pantoja, María Teresa
  • Gayán Sanz, Pilar
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Adánez Elorza, Juan
6 figures, 3 tables.-- Supplementary information available., Different chemical looping processes allow burning or gasify solid fuels with inherent CO2 capture because the oxygen is transferred from air to the fuel through a metal oxide based material, which is named oxygen carrier. To improve process efficiency and CO2 capture, highly reactive synthetic materials could be used. One of the challenges of using solid fuels is the oxygen carrier separation from the ash, because loss of oxygen carrier particles is expected during ash drainage. So, their costs would have necessary the recovery of the synthetic oxygen carrier. Mn-Fe based materials show magnetic properties in the spinel phase, which could be used for a magnetic separation. When these Mn-Fe materials are used at high temperature under oxidizing or reducing atmospheres, stability of the spinel phase should be guaranteed in order to take advantage of the magnetic properties. The design of low reactive Mn-Fe based materials with magnetic properties, which can be used as a support material for other highly reactive and active phases, was the main objective of this work. In this sense, the support must have high crushing strength, low reactivity under oxidation and reduction atmospheres at high temperatures and permanent magnetism at low temperature for solids separation. Materials prepared with different Mn/(Mn + Fe) molar ratios and calcination conditions were evaluated regarding mechanical strength, inerticity and magnetic properties. A Cu-based oxygen carrier prepared on the optimal support was prepared and evaluated along 240 oxidation-reduction cycles in thermobalance (25 h experiment), exhibiting suitable mechanical and magnetic characteristics as well as high reactivity., This work has been supported by the AEI/FEDER, UE ENE2016-77982-R, ENE2017-89473-R and ID2019-106441RB-I00 projects, and by the Regional Aragon Government via the T05_17R research group funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Gasificación de biomasa en una unidad Chemical-Looping de 50 kW utilizando ilmenita como transportador de oxígeno

  • Condori, Óscar
  • Abad Secades, Alberto
  • Adánez Elorza, Juan
  • Diego Poza, Luis F. de
  • Izquierdo Pantoja, María Teresa
  • García Labiano, Francisco
1 figura.-- Resumen de la comunicación oral presentada en la XV Reunión del Grupo Español del Carbón, 24-27 abril 2022, Granada (España).-- O69.-- D.L. GR 695-2022, Una de las opciones más relevantes para la reducción de emisiones de gases de efecto invernadero (GEI) en el sector del transporte es la producción de bio-combustibles sintéticos a partir de gas de síntesis. El proceso Biomass Chemical Looping Gasification (BCLG) es una prometedora opción para producir gas de síntesis de alta calidad mediante la gasificación de biomasa sin emisiones de CO2. En el proceso BCLG un transportador sólido de oxígeno (TO) circula entre dos reactores de lecho fluidizado interconectados, reactor de combustible (RC) y reactor de aire (RA), proporcionanado el oxígeno y el calor necesario para llevar a cabo la oxidación parcial de la biomasa obteniendo un gas de síntesis libre de nitrógeno bajo condiciones autotérmicas. En el RC se produce la gasificación de la biomasa y la combustión parcial de los gases producto con los sólidos, mientras que en el RA se regenera el TO en atmósfera de aire. El objetivo de este trabajo es investigar el efecto de las principales variables operacionales sobre el comportamiento y el rendimiento a gas de síntesis del proceso BCLG en una unidad en continuo de 50 kWt, utilizando ilmenita como TO., Este trabajo ha sido financiado por el Proyecto CLARA de Horizon 2020 European Union funding for Research & Invitation y por el AEI/FEDER, UE-ENE2017-89473R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of an oxygen on the CH4 reforming reaction linked to the biomass chemical looping gasification process

  • Samprón, Iván
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Adánez Elorza, Juan
7 figures, 3 tables.-- This article is part of the 2022 Pioneers in Energy Research: Anders Lyngfelt special issue., A major challenge in biomass chemical looping gasification (BCLG) is the conversion of CH4 and light hydrocarbons to syngas (CO + H2) when the goal is the use for bioliquid fuel production. In this work, tests were performed in a batch fluidized bed reactor to determine the catalytic effect on the CH4 reforming reaction of oxygen carriers used in the BCLG process. Three ores (ilmenite, MnGB, and Tierga), one waste (LD slag), and five synthetic materials (Fe10Al, Fe20Al, Fe25Al, Cu14Al, and Ni18Al) were analyzed. These results were compared to those obtained during ∼300 h of continuous biomass gasification operation in a 1.5 kWth BCLG unit. The low-cost materials (ores and waste) did not show any catalytic effect in the CH4 reforming reaction, and as a consequence, the CH4 concentration values measured in the syngas produced in the continuous prototype were high. The synthetic oxygen carriers showed a catalytic effect in the CH4 reforming reaction, increasing this effect with increasing temperature. With the exception of the Ni-based oxygen carrier (used as a reference), the Cu-based oxygen carrier, working at 940 °C, showed the best catalytic properties, in good agreement with the low CH4 concentration values measured in the syngas generated in the continuous unit. The tests performed in a batch fluidized bed reactor were demonstrated to be very useful in determining the catalytic capacity of oxygen carriers in the CH4 reforming reaction. This fact is highly relevant when a syngas with a low CH4 content is desired as a final product., This work was supported by ENE2017-89473-R AEI/FEDER, UE, and the CO2SPLIT Project, Grant PID2020-113131RB-I00, funded by MICIN/AEI/10.13039/501100011033. Iván Samprón thanks the Spanish Ministerio de Ciencia, Innovación y Universidades (MICIU) for the PRE2018-086217 predoctoral fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessment of the chemical looping gasification of wheat straw pellets at the 20 kWth scale

  • Condori, Óscar
  • Abad Secades, Alberto
  • Izquierdo Pantoja, María Teresa
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Adánez Elorza, Juan
9 figures, 3 tables.-- Supplementary information available., In this work, the Biomass Chemical Looping Gasification (BCLG) process was evaluated for syngas production at the 20 kWth scale using wheat straw pellets as the fuel feedstock and ilmenite as the oxygen carrier. The effect of different operational variables –namely the fuel reactor temperature, the mean residence time of solids in the fuel reactor, the oxygen-to-biomass ratio (controlled by the oxygen fed into the air reactor) and the gas velocity in the carbon stripper– on the process performance and the syngas yield was analyzed. Interestingly, smooth operation of the CLG unit was observed and no agglomeration issues detected. In addition, char produced during devolatilization still retained its initial pellet shape and unconverted char pellets were elutriated from the fuel reactor mixed with the finer oxygen carrier particles. Both steady-state and transition periods were evaluated to have a complete overview of the process. Transition periods were characterized by a different oxygen transfer rate in the air and fuel reactors. Steady state was reached when the oxygen transference rate was the same in both reactors. In this sense, the oxygen transference rate in the fuel reactor was the main factor affecting the syngas yield and the cold gas efficiency. Also, the temperature and mean residence time of solids in the fuel reactor showed a considerable effect on the char conversion and, consequently, on the syngas yield. However, operating conditions hardly affected the production of light hydrocarbons (CH4 and C2-C3) and tar, which were maintained roughly constant throughout the experimental campaign., This work has been carried out in the framework of the European Union's Horizon 2020 – Research and Innovation Framework Programme under grant agreement No 817841 (Chemical Looping gsification foR sustainAble production of biofuels – CLARA), and by the AEI/FEDER, UE (ENE2017-89473R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Syngas production via Biomass Chemical Looping Gasification (BCLG) in a 50 kWth unit using ilmenite as oxygen carrier

  • Condori, Óscar
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Izquierdo Pantoja, María Teresa
  • Abad Secades, Alberto
  • Adánez Elorza, Juan
5 figures, 1 table.-- Talk delivered at the 24th International Conference on Fluidized Bed Conversion, FBC24, at Chalmers University of Technology, in Gothenburg (Sweden)., The use of liquid biofuels is considered one of the most relevant ways to achieve the reduction of greenhouse gas (GHG) emissions in the sector of transport, and more specifically in aviation. A possible route is the use of biogenic waste from the agriculture and forestry sector to obtain synthesis gas via gasification and then the Fischer-Tropsch synthesis to obtain liquid biofuels. Among the different technologies available for the gasification process, Biomass Chemical Looping Gasification (BCLG) represents an innovative process that allows the generation of non-nitrogen diluted synthesis gas under autothermic conditions and with low tars content. By using carbon-neutral biomass as fuel, even net negative emissions could be achieved if the BCLG process is combined with CO2 storage. This work presents an experimental campaign of 40 hours of continuous operation in a 50 kWth BCLG unit developed inside the EU H2020 CLARA Project. Wheat straw pellets with additives were used as fuel feedstock and ilmenite as solid oxygen carrier. This work aimed to investigate the effect of different operational variables such as the fuel reactor temperature, the mean residence time of solids in the fuel reactor, the oxygen-to-biomass ratio (controlled by the oxygen fed into the air reactor) and the gas velocity in the carbon stripper, on the process performance and the syngas yield. Unlike previous studies, effective oxygen-to-biomass ratios that consider the right amount of oxygen that reacts with the oxygen carrier both in the fuel and air reactors (λeff,FR and λeff,AR, respectively) were defined The main factor affecting the syngas yield and the cold gas efficiency was λeff,FR, since it represents the amount of lattice oxygen that actually reacts in the fuel reactor during syngas combustion. However, it showed a low impact on the production of light hydrocarbons (CH4 and C2-C3). The temperature and mean residence time in the fuel reactor showed a considerable effect on the char conversion in the fuel reactor, since an increase in those factors caused an increase in the reaction rates or in the contact time between the oxygen carrier and biomass in the fuel reactor, respectively. Finally, the carbon stripper did not show the ability to separate the solid oxygen carrier from the unconverted char entrained from the fuel reactor, as the char still retained its initial pellet form. Therefore, an increase in gas velocity of carbon stripper promoted the char by-pass to the air reactor, increasing both the biomass conversion in the unit and the fraction of carbon emitted in the air reactor., This work has been supported by the European Union’s Horizon 2020-Research and Innovation Framework Programme under grant agreement No 817841 (Chemical Looping gAsification foR sustainable production of biofuels - CLARA), and by the AEI/FEDER, UE-ENE2017-89473R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Syngas production via Biomass Chemical Looping Gasification (BCLG) in a 50 kWth unit using ilmenite as oxygen carrier

  • Condori, Óscar
  • Abad Secades, Alberto
  • Izquierdo Pantoja, María Teresa
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Adánez Elorza, Juan
8 figures, 1 table.--Talk delivered at the 6th International Conference on Chemical Looping, 19-22 September 2022, Zaragoza, Spain., Biomass Chemical Looping Gasification (BCLG) is an innovative process that uses lattice oxygen from a solid oxygen carrier to produce high-quality synthesis gas without CO2 emissions. It is well known that one of the main targets for the reduction of greenhouse gas emissions (GHG) is to replace the use of fossil fuels in the transport sector with renewable sources. In this work, the BCLG technology is used to obtain clean synthesis gas from biomass for the production of liquid biofuels through Fischer Tropsch (FT) synthesis. The BCLG process is based on the circulation of a solid oxygen carrier between two interconnected fluidized bed reactors, the fuel and air reactors, providing the oxygen needed for the partial oxidation of the biomass to generate a non-nitrogen diluted syngas with low tar content. Also, the oxygen carrier is responsible for transporting the heat required for the endothermic reactions occurring in the fuel reactor from the heat generated in the exothermic reactions occurring in the air reactor, thus reaching autothermal conditions. In addition, negative emissions could be achieved by combining this technology with CO2 storage since biomass is a carbon-neutral fuel. The experimental campaign of this work was carried out in a BCLG unit at 18 kWth power during 60 hours of continuous operation with ilmenite as oxygen carrier and wheat straw pellets as fuel. The main factors affecting the syngas production was the oxygen-to-biomass ratio and char conversion. Increasing temperature showed a considerable effect on the char conversion in the fuel reactor since caused an increase in the gasification rate; also, the char conversion was affected by the mean residence time in the fuel reactor. The existing carbon stripper in the CLG unit did not show the ability to separate the unconverted char entrained from the fuel reactor since char still retained its initial pellet form. However, carbon stripper behaves as a secondary gasifier when using steam as fluidizing agent increasing char conversion, syngas yield and carbon capture efficiency. Finally, low tar generation was found during continuous operation, reaching values below 3.5 g/kg of dry biomass., This work has been supported by the European Union’s Horizon 2020-Research and Innovation Framework Programme under grant agreement No 817841 (Chemical Looping gAsification foR sustainable production of biofuels - CLARA), and by the AEI/FEDER, UE-ENE2017-89473-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An innovative Cu-Al oxygen carrier for the biomass chemical looping gasification process

  • Samprón, Iván
  • Cabello Flores, Arturo
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Diego Poza, Luis F. de
11 figures, 5 tables.-- Supplementary information available., Biomass chemical looping gasification (BCLG) is a novel technology that enables the production of renewable syngas without the need for an external supply of energy or power while achieving negative carbon emissions. In this work, the behavior of a synthetic Cu-based (14 wt% CuO) oxygen carrier, Cu14Al_ICB, was tested for 45 h in a 1.5 kWth continuous unit using pine sawdust as fuel. The effect of the oxygen-to-fuel ratio (λ) and gasification temperature on syngas composition and gasification parameters, including fuel conversion, carbon capture, cold gas efficiency, and syngas yield, was studied. A decrease in the oxygen-to-fuel ratio increased molar flows of H2 and CO in the syngas, while an increase in gasification temperature mainly improved char gasification, also enhancing H2 and CO generation. High amounts of syngas with low CH4 molar flows (∼2.3 mol CH4/kg of dry biomass) were obtained under any conditions due to the catalytic effect of metallic copper on CH4 reforming reactions. Syngas yield values were achieved approximating those obtained with Ni-based solids. The oxygen carrier also had a very positive effect on tar removal, reaching tar concentration values similar to those obtained by operating under chemical looping combustion conditions. The attrition rate measured with this oxygen carrier was the lowest obtained to date for any oxygen carrier operating under BCLG conditions. In addition, the mechanical properties, reactivity, and oxygen transport capacity of the oxygen carrier were maintained throughout the campaign. Therefore, the Cu14Al_ICB oxygen carrier has proved to be an excellent material for the BCLG process., This work was supported by ENE2017-89473-R AEI/FEDER, UE, and the CO2SPLIT Project, Grant PID2020-113131RB-I00, funded by MICIN/AEI/10.13039/501100011033. I. Samprón thanks the Spanish Ministerio de Ciencia, Innovación y Universidades (MICIU) for the PRE2018-086217 predoctoral fellowship. A. Cabello is grateful for Grant IJC2019-038908-I funded by MICIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Gasificación de biomasa mediante tecnologías de Chemical Looping para producción de gas de síntesis/H2 sin emisiones de CO2

  • Samprón, Iván
180 páginas.-- Tesis doctoral presentada para optar al grado de Doctor del Programa de Ingeniería Química y del Medio Ambiente por la Universidad de Zaragoza el 3 de mayo de 2024.-- Sobresaliente cum laude., [EN] Biomass Chemical Looping Gasification (BCLG) is a novelty technology to produce non N2-diluted syngas (H2 and CO) without the need for pure oxygen. In addition, BCLG allows to remove carbon from the atmosphere if the CO2 generated in the process is captured and sent for storage. BCLG process is performed in two interconnected fluidized bed reactors, an oxidation reactor and a reduction reactor. A solid oxygen carrier is used to transfer oxygen from the oxidation reactor to the reduction reactor, avoiding the direct contact between air and fuel. In the reduction reactor, devolatilization of biomass takes place, producing char which is also gasified by effect of steam, CO2 or a mixture of both that are fed to the reduction reactor as fluidizing agent. Then, the oxygen carrier enters into oxidation reactor, being oxidized by an air stream. The oxygen carrier is heated up, since the oxidation reaction is exothermic. In this way, when the oxygen carrier enters to the reduction reactor again, it transfers the heat and oxygen needed for the devolatilization of biomass and the gasification of char, which are endothermic reactions. The BCLG process has been studied in this thesis in a 1.5 kWth pilot plant, evaluating the use of three oxygen carriers with different contents of Fe2O3 over Al2O3 and an oxygen carrier with 14 % CuO over Al2O3. During this research, it has also been studied the improvement of quality and quantity of syngas generated and it was carried out an optimization of the process to determine the conditions that permit the operation under autothermal conditions. Initially, a solid oxygen carrier previously tested by our research group was evaluated in the 1.5 kWth prototype. This oxygen carrier was composed by a 20 % Fe2O3 over Al2O3. After that, two new oxygen carriers with Fe2O3 contents of 10 % and 25 % were prepared and tested. The three oxygen carriers showed similar trends on the molar flows of gases generated and on the gasification parameters when the oxygen-to-fuel ratio and the temperature were varied. A high CH4 generation was also found for the three solids. The increase of temperature improved the gasification rate, increasing the CO2 capture, which reached values >95 %. Increasing temperature also reduced tar formation for all the three oxygen carriers. The oxygen carrier characterization showed that mechanical strength decreased along the operation time (redox cycles), but increased when de Fe2O3 content decreased. The behaviour of Fe2O3/Al2O3 oxygen carriers under different reaction environments was studied in detail using a thermogravimetric analyzer. Series of 300 redox cycles were carried out emulating a gasification atmosphere, a combustion atmosphere and an intermediate atmosphere. It was observed that the for the tests carried out in reducing atmosphere, typical of gasification process, the increase in temperature and the increase in Fe2O3 content promoted iron migration from inside to outside of the particles, creating an external and weak layer which would be elutriated as fine particles in a fluidized bed reactor. The catalytic activity of different oxygen carriers (ores, wastes and synthetic Fe and Cu solids) was evaluated in order to improve the quantity and quality of the syngas through the conversion of CH4 and tars. CH4 experiments were carried out in a discontinuous fluidized bed, reducing the oxygen carriers with a gas composition similar to the one found in the reduction reactor of continuous unit experiments. Ores barely showed catalytic activity on CH4 whereas it increased for synthetic Fe2O3/Al2O3 solids when temperature also increased. The solid oxygen carrier composed by a 14 % of CuO over alumina reached a CH4 conversion of 85 % at 940 °C. The experiments carried out to evaluate the catalytic activity in tar removal where carried out during an international stay at Chalmers University of Technology (CUT) in Sweden. A discontinuous fluidized bed reactor which permitted the ethylene and benzene feeding was used. Experiments at three temperatures using ores, synthetic solids and a waste oxygen carrier were performed. The ores and the waste did not show catalytic activity on ethylene conversion, while their catalytic activity on benzene conversion was very low at low temperatures. In contrast, synthetic Fe2O3/Al2O3 oxygen carriers showed an ethylene conversion >85 % at the three temperatures, whereas the benzene conversion was always >70 %. The 14 % CuO oxygen carrier showed the highest ethylene conversion (>95 % at the three temperatures) and reached complete conversion of benzene at 900 °C. In this study it was observed that CH4 was an intermediate compound in the benzene and ethylene cracking/reforming reactions. Considering the results obtained in this work, the oxygen carrier composed by a 14 % of CuO over Al2O3 was selected to study the BCLG process in the 1.5 kWth unit. The effect of oxygen-to-fuel ratio and temperature on molar flows, tars and gasification parameters was studied. It was seen that the Cu-based oxygen carrier produced a gas stream with low CH4concentration, whereas the syngas generation was higher. The increase in temperature promoted the increase of syngas yield, which reached 1.14 Nm3 per kg of dry biomass at 920 °C. The oxygen carrier characterization showed a high mechanical strength while the chemical properties were maintained throughout the campaign. The estimated lifetime of the particles was the highest among previous works found in the literature. In order to complete the study, an optimization of the BCLG process by solving mass and energy balances was carried out. The operation conditions which allowed autothermal operation were determined. Several oxygen control methods were analysed. The oxygen control method consisting in limiting the oxygen fed in the oxidation reactor allows to obtain a higher amount of syngas and to operate in a wide range of oxygen carrier circulation flows. The effect of different variables affecting the energy and mass balances using this oxygen control method was simulated. It was found that increasing preheating temperature of the reactor inlet gases increased syngas yield. Moreover, this oxygen control method allowed operation using the same oxygen-to-fuel ratio for oxygen carriers with different oxygen transport capacities. Furthermore, it was observed that the presence of CH4 in the gas produced had an important effect on the oxygen-to-fuel ratio needed for autothermal operation, being necessary a higher oxygen transference when the CH4 generation decreased., [ES] La gasificación de biomasa mediante tecnologías Chemical Looping, o Biomass Chemical Looping Gasification (BCLG), es una tecnología novedosa para la producción de gas de síntesis (H2 y CO) no diluido con N2 y sin necesidad de usar O2 puro o aporte externo de energía. Adicionalmente, esta tecnología ofrece la posibilidad de obtener emisiones negativas de carbono, es decir, retirar CO2 de la atmósfera si el CO2 formado en el proceso es capturado y almacenado. El proceso BCLG se realiza en dos reactores de lecho fluidizado interconectados, el reactor de reducción y el reactor de oxidación. Entre estos reactores circula un transportador sólido de oxígeno, encargado de transportar oxígeno y calor, evitando así el contacto directo entre el aire y el combustible. En el reactor de reducción tiene lugar la desvolatilización de la biomasa, generando un residuo carbonoso que a su vez es gasificado por efecto del vapor de agua y/o CO2 introducido en el reactor como agente fluidizante. Parte de los volátiles y productos de gasificación reaccionan con el transportador de oxígeno reduciéndolo. A continuación, el transportador entra al reactor de oxidación, donde se reoxida con una corriente de aire. Puesto que la reacción de oxidación es exotérmica, el transportador de oxígeno eleva su temperatura de tal manera que en su regreso al reactor de reducción transporta el calor necesario para que tenga lugar la desvolatilización de la biomasa y la gasificación del residuo carbonoso, reacciones endotérmicas. En esta tesis se ha estudiado el proceso BCLG, evaluando en una planta piloto de 1.5 kWt el uso de tres transportadores de oxígeno con diferentes contenidos de Fe2O3 sobre alúmina y un transportador con un 14 % de CuO sobre alúmina. Durante la investigación también se ha realizado un estudio para la mejora de la calidad y cantidad del gas de síntesis y una optimización del proceso para determinar aquellas condiciones que permiten la operación en estado autotérmico. Inicialmente se evaluó en una planta piloto de 1.5 kWt un transportador de oxígeno conocido por el grupo, con un contenido del 20 % en peso de Fe2O3 sobre alúmina y posteriormente dos más con un 10 % y 25 % de Fe2O3. Los tres transportadores presentaron tendencias similares en los flujos molares de gas generado y en los parámetros de gasificación cuando se varió la relación oxígeno-combustible, destacando una formación importante de CH4. El aumento de la temperatura aumentó la velocidad de gasificación del carbono en el rector de reducción, aumentando así la producción de gas de síntesis y la eficacia de captura de CO2, que alcanzó valores superiores al 95 %. El aumento de la temperatura también tuvo un efecto significativo sobre la reducción de alquitranes en todos los casos. La caracterización físico-química de los transportadores mostró que la resistencia mecánica y química del transportador disminuía con el tiempo de operación (número de ciclos redox) pero aumentaba cuanto menor era el contenido en Fe2O3 en el transportador de oxígeno. Para analizar con más detalle el comportamiento de los transportadores de Fe/Al se estudió en termobalanza la evolución de la degradación de estos transportadores en diferentes atmósferas de reacción. Para ello se realizaron series de 300 ciclos redox que simulaban una atmósfera típica de combustión, una de gasificación y una atmósfera intermedia. Se observó que la atmósfera reductora, el aumento de la temperatura y del contenido en Fe2O3 promovían la migración de hierro hacia el exterior de las partículas, creando una capa externa muy frágil que sería elutriada en forma de finos en un lecho fluidizado. Con el objetivo de aumentar la cantidad y calidad del gas de síntesis, se evaluó la actividad catalítica de varios transportadores de oxígeno (minerales, residuos y materiales sintéticos de Fe y de Cu) sobre la conversión de CH4 y alquitranes. Los experimentos con CH4 se realizaron en un lecho fluidizado discontinuo, donde se redujo el transportador con una composición de gases similar a la obtenida en la planta piloto y posteriormente se alimentó CH4. Se observó que los transportadores minerales apenas tenían actividad catalítica, mientras que con los transportadores sintéticos de Fe2O3/Al2O3 la conversión de CH4 aumentaba con la temperatura. El transportador con mayor capacidad de conversión de CH4 fue el compuesto por un 14 % de CuO sobre alúmina, que alcanzó un 85 % a 940 ºC. Los experimentos para determinar la actividad catalítica sobre la eliminación de los alquitranes se realizaron durante una estancia internacional en la Universidad Tecnológica de Chalmers (Suecia). Se usó un lecho fluidizado discontinuo adaptado para la alimentación de etileno y benceno y se hicieron pruebas a tres temperaturas con transportadores de oxígeno minerales, sintéticos y un residuo. Se observó que a baja temperatura los transportadores minerales y el residuo no presentaban actividad catalítica en la conversión del etileno y era muy baja en la del benceno. Por el contrario, los transportadores sintéticos de Fe2O3/Al2O3 mostraron una conversión de etileno >85 % a todas las temperaturas estudiadas, mientras que la conversión de benceno se mantuvo siempre >70 %. El transportador consistente en un 14 % de CuO sobre alúmina fue el que mostró una mayor conversión de etileno (>95 % a las tres temperaturas) y alcanzó una conversión completa de benceno cuando la temperatura fue superior a 900 ºC. En este trabajo se observó que el CH4 actuaba como compuesto intermedio en el craqueo/reformado de benceno y etileno. En base a los resultados obtenidos en el estudio de la mejora de la calidad y cantidad del gas de síntesis generado, se seleccionó el transportador de oxígeno con un 14 % de CuO sobre alúmina para la investigación del proceso BCLG en la planta de 1.5 kWt. Se evaluó el efecto de la relación oxígeno-combustible y la temperatura de gasificación sobre los flujos molares de gases, los alquitranes y los principales parámetros de gasificación. Se observó que este transportador generaba un gas con una concentración muy baja de CH4, dando lugar a una mayor cantidad de gas de síntesis. El aumento de la temperatura de gasificación causó un aumento en el rendimiento a gas de síntesis, alcanzado 1.14 Nm3 por kg de biomasa seca a 920 C para una relación oxígeno-combustible típica de la operación en estado autotérmico. Se observó, además, que este transportador tenía un elevado efecto catalítico en la eliminación de alquitranes, reduciendo su concentración hasta 0.35 g por kg de biomasa seca a 920 C. La caracterización del transportador de oxígeno mostró una elevada resistencia mecánica y el mantenimiento de sus propiedades químicas a lo largo de toda la operación. La vida media estimada de las partículas de este transportador de oxígeno fue muy superior a la de cualquier otro propuesto previamente en la literatura para su uso en BCLG. Para completar el estudio, se realizó una optimización del proceso BCLG mediante balances de materia y energía, determinando aquellas condiciones que permiten la operación en estado autotérmico. Se analizaron los métodos de control de transferencia de oxígeno entre reactores resultando que el método consistente en la limitación del oxígeno alimentado al reactor de oxidación permitía la obtención de una mayor cantidad de gas de síntesis y la operación en un rango amplio de caudales de circulación de sólidos. Se simuló el efecto de diferentes variables que afectan a los balances de materia y energía destacando que, con el método de control basado en la restricción del oxígeno alimentado al reactor de oxidación, cuanto mayor era la temperatura de precalentamiento de los gases alimentados a los reactores mayor era el rendimiento a gas de síntesis y que era posible operar con la misma relación oxígeno-combustible utilizando transportadores con diferentes capacidades de transporte de oxígeno. Asimismo, se observó que la presencia de CH4 en el gas tenía un efecto significativo sobre la relación oxígeno-combustible requerida para la operación en estado autotérmico, siendo necesaria una mayor transferencia de oxígeno cuanto menor era la generación de CH4., Esta tesis ha sido realizada gracias a la financiación de la ayuda predoctoral PRE2018-086217 (proyecto ENE2017-89473-R AEI/FEDER, UE) y del Departamento de Ciencia y Sociedad del Conocimiento del Gobierno de Aragón., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Biomass chemical looping gasification for syngas production using a copper-based oxygen carrier in a 1.5 kWth unit

  • Samprón, Iván
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Cabello Flores, Arturo
9 figures, 3 tables.-- Work presented at 6th International Conference on Chemical Looping, 19-22 September 2022, Zaragoza, Spain., Biomass Chemical Looping Gasification (BCLG) is a novelty technology which enables the production of renewable syngas without the need for external power supply and achieving negative carbon emissions. In this work, the behavior a synthetic Cu-based (14 wt% CuO) oxygen carrier, Cu14Al_ICB, was tested during 45 h in a 1.5 kWth continuous unit using pine sawdust as fuel. The effect of oxygen-to- fuel ratio (𝛌) and gasification temperature on syngas composition and gasification parameters, such as fuel conversion, carbon capture, cold gas efficiency, and syngas yield, was studied. The decrease of oxygen-to-fuel ratio increased the concentration of H2 and CO, while the increase in gasification temperature mainly improved char gasification, also promoting H2 and CO generation. High amounts of syngas with low CH4 concentrations (~2.3 mol/kg of dry biomass) were obtained at any condition due to the catalytic effect of metallic copper on CH4 reforming reactions. Values of syngas yield close to the obtained with Ni-based solids were achieved. The oxygen carrier also had a high effect on tar removal, reaching tar concentration values similar to those obtained by operating under Chemical Looping Combustion conditions. A particle lifetime of ~8000 h was inferred for this oxygen carrier, which is the highest lifetime obtained so far for an oxygen carrier working under BCLG conditions. In addition, the mechanical properties, reactivity and oxygen transport capacity were maintained during the campaign. Therefore, the Cu14Al_ICB oxygen carrier has proven to be an excellent material for the BCLG process., This work was supported by ENE2017-89473-R AEI/FEDER, UE, and the CO2SPLIT Project, Grant PID2020-113131RB- I00, funded by MICIN/AEI/10.13039/501100011033. Iván Samprón thanks the Spanish Ministerio de Ciencia, Innovación y Universidades (MICIU) for the PRE-086217 predoctoral fellowship. A. Cabello thanks the Grant IJC2019- 038908-I funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Producción de gas de síntesis mediante el proceso Biomass Chemical Looping Gasification utilizando transportadores de oxígeno de bajo coste

  • Condori, Óscar
Tesis presentada en el Departamento de Ingeniería Química y del Medio Ambiente de la Universidad de Zaragoza, para optar al grado de Doctor., Entre las diferentes tecnologías emergentes propuestas para la gasificación de biomasa, el proceso Biomass Chemical Looping Gasification (BCLG) representa un método innovador que permite la generación de gas de síntesis de alta calidad con bajo contenido de alquitrán y en condiciones autotérmicas. Su principal ventaja con respecto a la gasificación convencional es que no requiere el uso de O2 puro (costoso) para obtener un gas de síntesis sin diluir en nitrógeno, además de que previene las emisiones de CO2 a la atmósfera. El proceso BCLG utiliza dos reactores de lecho fluidizado interconectados: un reactor de reducción (RR) y un reactor oxidación (RO). Se basa en un mecanismo que emplea un transportador sólido de oxígeno (óxidos metálicos, MexOy) que circula entre ambos reactores y se encarga de transportar oxígeno y calor desde el RO hasta el RR, evitando el contacto directo entre el aire y la biomasa. La biomasa se alimenta al RR donde se descompone en gases volátiles, alquitranes y char. El char se gasifica con el agente gasificante (vapor o CO2), que también actúa como gas fluidizante para el RR. A continuación, ocurre la oxidación parcial de los diferentes gases producidos mediante reacciones gas-sólido con el transportador de oxígeno que se reduce en paralelo. Luego, el transportador de oxígeno reducido circula hasta el RO donde se reoxida con aire para iniciar un nuevo ciclo. La oxidación del transportador de oxígeno es altamente exotérmica lo que incrementa su temperatura permitiendo que a su regreso al RR proporcione el calor necesario para la conversión de la biomasa (proceso endotérmico). Por otro lado, el proceso BCLG ayuda a confinar el carbono de la biomasa en los gases de salida del RR, facilitando la separación del CO2 generado durante el proceso. Inlcuso, si se combina con el concepto de bioenergía con captura y almacenamiento de carbono (BECCS), el proceso BCLG tiene el potencial de alcanzar emisiones negativas de carbono. Durante esta tesis se ha estudiado el proceso BCLG enfocado en la producción de gas de síntesis de alta calidad bajo condiciones autotérmicas, que posteriormente se utilizará para la producción de biocombustibles de segunda generación (combustible para aviación) mediante el proceso de síntesis Fischer-Tropsch (F-T) en el marco del proyecto europeo CLARA. En este caso, la etapa de separación del CO2 podría integrarse durante la limpieza del gas de síntesis previo a la síntesis de los biocombustibles. De esta manera, el proceso BCLG se sitúa como una de las principales alternativas para la descarbonización del sector del transporte. En primer lugar, se evaluaron las características físico-químicas de diversos materiales de bajo coste, como minerales y residuos industriales basados en óxidos de hierro y manganeso, para su posible uso como transportadores de oxígeno en el proceso BCLG. Todos los materiales estudiados mostraron suficiente capacidad de transporte de oxígeno para llevar a cabo la gasificación de biomasa. También se analizó su reactividad frente a los principales gases reductores del proceso, como el H2 (presente en el gas de síntesis) y el CH4 (representativo de los volátiles de la biomasa), mediante análisis termogravimétrico. Los materiales mostraron una mayor reactividad con el H2, destacando especialmente los minerales de manganeso sobre los de hierro. Sin embargo, en cuanto a la reactividad frente al CH4, los materiales basados en Fe obtuvieron mejores resultados, lo que se traduce en una mayor capacidad para convertir la materia volátil, favoreciendo la maximización de la producción de gas de síntesis en el proceso BCLG. Además, se evaluó la resistencia a la atrición de los diferentes materiales, una propiedad clave para su uso en BCLG, dado que este proceso opera utilizando dos reactores de lecho fluidizado interconectados. Esta resistencia se midió utilizando el índice AJI y la resistencia a la rotura de las partículas. Los minerales de Mn-Gabón y Elwaleed B presentaron altos valores de atrición, con índices AJI del 16.8 % y 8.8 %, respectivamente, mientras que la ilmenita y el residuo industrial LD-slag mostraron mejores resultados, con valores de 2.4 % y 4.6 %, respectivamente. Teniendo en cuenta la reactividad de los materiales y su resistencia a la atrición, se seleccionaron la ilmenita, el mineral de Fe de Tierga, el LD-slag y el Mn de Sibelco como los más adecuados para su uso en una planta piloto de 1.5 kWt en operación continua. No obstante, debido a problemas de suministro con el último, se consideró el mineral de Mn de Gabón en su lugar. A continuación, se inició la experimentación en una planta piloto de 1.5 kWt en continuo, donde se estudió el desempeño de los cuatro transportadores de oxígeno seleccionados utilizando astilla de pino como combustible. Se analizó el efecto de diversas condiciones de operación como la temperatura, el ratio oxígeno/biomasa (λ) y el ratio vapor/biomasa (S/B) sobre la eficiencia del proceso BCLG marcada por parámetros como la conversión de biomasa (Xb), la eficiencia de conversión de carbono (ηcc), el rendimiento a gas de síntesis (Ysg) y la eficiencia de gas frío (ηg). Los resultados mostraron que temperaturas más altas mejoraban la conversión de biomasa y la eficiencia de conversión de carbono, mientras que el aumento de λ disminuyó la calidad del gas de síntesis al aumentar la concentración de CO2 y reducir la de CO y H2. Se observó que un mayor ratio S/B aumentó la concentración de H2 y CO2 y disminuyó la del CO. Además, mejoró la Xb y ηcc, aunque con una mínima variación en el rendimiento del gas de síntesis. Adicionalmente, se probaron otros dos tipos de biomasa (cáscara de almendra y hueso de oliva), con rendimientos similares en Xb y minimas diferencias en la composición del gas de síntesis. Además, se estudió el uso de CO2 como agente gasificante, que redujo la generación de alquitrán aunque produjo un gas de síntesis de menor calidad que utilizando vapor, demandando un mayor esfuerzo en la posterior separación del CO2 existente en el gas producto. El análisis de los resultados obtenidos mostró que la ilmenita y el LD-slag destacaron por su mayor rendimiento a gas de síntesis y menor producción de alquitrán, con la ilmenita mostrando la mayor resistencia a la atrición y vida útil, mientras que el mineral de Mn-Gabón tuvo los peores resultados en ambos aspectos. Así, la ilmenita y el LD-slag fueron los más prometedores para futuras pruebas a mayor escala. En este punto de la tesis se dio inicio a la campaña experimental en una planta piloto BCLG de 20 kWt utilizando ilmenita como transportador de oxígeno. Este material fue seleccionado por su buen desempeño en los ensayos previos a menor escala y a su mayor facilidad para su disponibilidad para los ensayos en el laboratorio en ese instante., Los resultados obtenidos mostraron la importancia de tres variables operativas clave para el proceso: la temperatura, el tiempo medio de residencia de los sólidos (tmr,RR) y la relación oxígeno/biomasa (λ). Estas variables tuvieron un papel crucial en la eficiencia del proceso y en el rendimiento a gas de síntesis. La temperatura y el tmr,RR tuvieron un efecto directo sobre la conversión del char (Xchar,RR), que a su vez afectaba de forma directa a diversos parámetros de eficiencia del proceso, como la Ysg y el ηcc. Temperaturas de gasificación más elevadas (> 900 ºC) y tmr,RR más prolongados favorecieron una mayor Xchar,RR, que al mismo tiempo incrementó la Xb, la ηcc y mejoró la eficiencia general del sistema. Por otro lado, se encontró que un aumento de la tranferencia de oxígeno en el RR (λRR) favoreció la combustión del gas de síntesis, aumentando la producción de CO2 y en consecuencia reduciendo las concentraciones de CO y H2. Sin embargo, es importante alcanzar un valor óptimo para lograr un proceso autotérmico con la mayor calidad del gas de síntesis. Por otra parte, el aumento de λRR no afectó a la producción de hidrocarburos ligeros (CH4 y C2-C3) debido a la baja reactividad de la ilmenita con este tipo de compuestos. El destino de los compuestos de carbono presentes en la biomasa también se vio afectado por las condiciones de operación. Condiciones con baja Xchar,RR (temperatura y tmr,RR bajos) produjeron acumulación del char en el RR, que se vio arrastrado junto con el transportador de oxígeno hasta el RO donde se quemó en contacto con el aire y generó emisiones de CO2 a la atmósfera. Esto evidenció que el Separador de Carbono (SC) no fue capaz de separar el char pelletizado de la ilmenita debido al mayor tamaño de las partículas de char. Sin embargo, el uso de vapor en este dispositivo mejoró significativamente la Xchar,RR ya que actuaba como un gasificador secundario. También se observó la importancia del diseño del RO y de los sifones para optimizar y mejorar la operación y el manejo de la planta. Durante la experimentación en la planta de 20 kWt, también se estudió el comportamiento de la ilmenita con diferentes tipos de biomasa. Se observó una mayor reactividad en los pellets de paja de trigo comparados con el residuo de bosque de pino, lo que resultó en una mayor Xchar,RR. No obstante, las diferencias en la producción de gas de síntesis entre ambos tipos de biomasa fueron pequeñas, y la generación de hidrocarburos ligeros se mantuvo constante, independientemente del tipo de biomasa. Otro factor estudiado fue el efecto del pretratamiento de la biomasa mediante torrefacción, donde se disminuye la humedad y el contenido de volátiles en el combustible. En este caso, la temperatura tuvo mayor influencia sobre el proceso y se lograron mejores rendimientos a mayor temperatura. Además, se estudió el efecto del tamaño de la biomasa mediante el uso de pellets de residuo de bosque de pino molidos. Esto mejoró significativamente la Xchar,RR, debido a una mayor velocidad de gasificación del char causada por una menor resistencia a la difusión interna. También aumentó la producción de hidrocarburos ligeros respecto a los pellets enteros, posiblemente por un incremento en la velocidad de desvolatilización, lo que pudo dificultar el contacto entre los volátiles y las partículas de transportador de oxígeno. Por otro lado, se evaluó la generación de alquitranes durante la experimentación en la planta de 20 kWt, teniendo en cuenta el tipo de biomasa, el tamaño de particula del combustible y su pretratamiento mediante torrefacción. La cantidad y composición de los alquitranes generados dependieron principalmente del tipo de biomasa y su pretratamiento, consiguiendo valores totales siempre por debajo de los obtenidos en procesos de gasificación convencional. La paja de trigo sin torrefactar generó benceno como compuesto mayoritario, con la presencia de naftaleno y tolueno en menor medida, alcanzando un contenido total de alquitrán de hasta 3.5 g/kg de biomasa seca, mientras que la torrefacción mejoró la calidad del gas de síntesis reduciendo el contenido de alquitrán hasta 2 g/kg b.s. El residuo de bosque de pino generó principalmente naftaleno y una menor cantidad de benceno y acenaftileno, con un contenido total de hasta 4.5 g/kg b.s. En este caso, el tamaño de particula de la biomasa apenas tuvo influencia sobre la generación de alquitrán. Se analizó el impacto del régimen de fluidización del RR comparando los resultados obtenidos en las dos plantas piloto (1.5 y 50 kWt) con ilmenita como transportador de oxígeno y madera/residuo de pino como combustible. A menor escala (régimen burbujeante), el tiempo de residencia en el RR, tmr,RR, es mayor que en la planta de 20 kWt (régimen turbulento). lo que facilitó obtener mayores valores de Xchar,RR. El diseño del RO también influyó en la eficiencia del proceso, sugiriendo la necesidad de su optimización en futuros diseños para minimizar la cantidad de oxígeno que reacciona con parte del char que pudiese alcanzar dicho reactor. A pesar de estas variaciones, ambas plantas mostraron rendimientos a gas de síntesis similares, aunque la planta de 20 kWt logró una mejor conversión de hidrocarburos ligeros (CH4 y C2-C3), probablemente debido a un mayor tiempo de residencia del gas en el RR y mejor interacción entre el gas y los sólidos gracias al régimen turbulento. Por último, se analizó la integridad física de la ilmenita y la posible interacción con las cenizas presentes en la paja de trigo. Tras 40 horas de operación continua en condiciones BCLG, la ilmenita no mostró signos de aglomeración ni problemas de fluidización. Esto confirmó la efectividad de los aditivos presentes en los pellets de paja para prevenir la aglomeración. Sin embargo, un análisis más exhaustivo mostró que el Ca, K y Si (presentes en las cenizas) se concentraban en la superficie externa de las partículas de ilmenita llegando incluso al interior de la grietas. Las partículas de ilmenita presentaron un ligero desgaste consecuencia de la migración del Fe hacia el exterior de las partículas donde se formaba una capa que posteriormente se desprendía. Esto se reflejó en una pérdida de la capacidad de transporte de oxígeno, aunque la reactividad no se vió afectada. En términos generales la ilmenita mostró un buen desempeño y una buena resistencia a la atrición., Esta tesis se desarrolló entre los años 2019 y 2024 en el Instituto de Carboquímica (ICB) de Zaragoza, perteneciente al Consejo Superior de Investigaciones Científicas (CSIC). El trabajo fue realizado gracias a la financiación del Programa de Investigación e Innovación Horizonte 2020 de la Unión Europea, en virtud del acuerdo de subvención nº 817841 (Chemical Looping Gasification for Sustainable Production of Biofuels – CLARA). La investigación también contó con el apoyo financiero parcial de la Agencia Estatal de Investigación del Ministerio español de Ciencia e Innovación, mediante las subvenciones de los proyectos ENE2017-89473-R/AEI/FEDER, UE y PID2019-106441RB-I00, Peer reviewed
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Life cycle assessment of natural gas fuelled power plants based on chemical looping combustion technology

  • Navajas León, Alberto
  • Mendiara, Teresa
  • Goñi, Víctor
  • Jiménez, Adrián
  • Gandía Pascual, Luis
  • Abad, Alberto
  • García Labiano, Francisco
  • Diego, Luis F. de
Among the different Carbon Capture and Storage (CCS) technologies being developed in the last decades, Chemical Looping Combustion (CLC) stands out since it allows inherent CO2 capture. In the CLC process, there is a solid oxygen carrier circulating between two reactors in a cycle that allows providing the oxygen needed for combustion. In one of the reactors, named as fuel reactor, the fuel is introduced and combusted while the oxygen carrier reduction takes place. In the second reactor, named air reactor, the oxygen carrier is reoxidized in air. Different materials based on copper, nickel and iron oxides have been proposed as oxygen carriers for the CLC process. This work presents an environmental evaluation of the CLC process for natural gas based on Life Cycle Assessment (LCA). Five different oxygen carrier materials already tested in pilot plants were considered and the results compared to the conventional natural gas combustion in a gas turbine in a combined cycle without and with CO2 capture using postcombustion capture with amines. In view of the results, lower impact of the CLC process compared to the base case is expected without and with CO2 capture. The influence of several variables on the results was considered, such as temperature in the air reactor, lifetime of the oxygen carrier and possibility of recuperation of the depleted oxygen carrier. The nickel-based oxygen carriers were identified as the most adequate to be used in natural gas combustion. However, due to their toxicity, several analyses were also performed in order to identify improvements in the known oxygen carriers that can qualify them to replace nickel-based materials., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) [grant numbers ENE2017-89473-R, ENE2016-77982-R] and the European Regional Development Fund (ERDF) under the program 'Programa Operativo FEDER Aragón 2014-2020 - Construyendo Europa desde Aragón. Proyecto BiosinCO2 (LMP180_18)'.