Pasar al contenido principal

ESTUDIO Y CONSERVACION DEL PATRIMONIO CULTURAL CON LASERES

PID2019-104124RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical diagnostics of gold plasmas produced by infrared laser ablation

  • Oujja, Mohamed
  • Camacho, J.J.
  • Sanz, Mikel
  • Castillejo, Marta
  • de Nalda, R.
10 pags., 8 figs., 1 tab., Laser plasmas produced by ablation of a gold target in a vacuum are spatially and temporally characterized by optical emission spectroscopy. A Nd:YAG laser (1064 nm, pulse width 15 ns and fluences of 5.8 and 11 J/cm) is used to ablate the Au target. Au, Au and Auspecies were studied both as a function of the location from the target surface and of the time delay from the laser pulse arrival. Plasma temperature, electron density and average velocities were measured from the spatiotemporal analysis. The results show a faster decay of the continuum emission, Au and Au species than in the case of neutral Au atoms. Higher velocities and a narrower temporal distribution of Au ions are observed when compared to Au atoms. Electron temperature was evaluated from the comparison of Au atomic-Boltzmann local thermodynamic equilibrium spectra with experimental ones at various delay times from the laser pulse incidence. Electron densities and electron temperatures approximately decrease from 2.3 to 1.1 × 10 cm and from 1.6 to 0.4 eV, respectively, as the delay time increases along the first 2 µs of plasma evolution., This research was supported by the Spanish State Research Agency (AEI) and the European Regional Development (FEDER) through Projects CTQ2016-75880-P-AEI/FEDER, PID2019-104124RB-I00/AEI/10.13039/501100011033 and PID2019-106125GB-I00/AEI/10.13039/501100011033; the European H2020 IPERION HS Project (Integrated Platform for the European Research Infrastructure ON Heritage Science) (GA 871034, WP5); TOP Heritage-CM (S2018/NMT-4372) project from the Community of Madrid and with the support of Plataforma Temática Interdisciplinar of CSIC “Patrimonio Abierto: Investigación y Sociedad” (PTI-PAIS). M. O. thanks CSIC for contract.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spatiotemporally resolved optical emission spectroscopy and harmonic generation in Cu plasmas

  • Oujja, Mohamed
  • Camacho, J.J.
  • Sanz, Mikel
  • López-Quintas, Ignacio
  • Castillejo, Marta
  • de Nalda, R.
9 pags., 6 figs., Laser-induced ablation plasmas of Cu generated by nanosecond 1064 nm pulses have been examined as media for third harmonic generation of a nanosecond driving pulse. A narrow window of ablation fluences where third harmonic generation is optimized has been identified in a region around twice the ablation threshold. A detailed analysis of the features of the Cu plasma across this critical fluence window, through spatially and temporally resolved optical emission spectroscopy, has been used to assess critical plasma parameters such as temperature, electron density, and abundance of Cu species in different ionization stages. This description has been correlated with the conditions for optimum low-order harmonic generation in the Cu plasma., This research was supported by the Spanish Agencia Estatal de Investigaci on (AEI) and the European Regional Development (FEDER) through Projects CTQ2016-75880-P-AEI/FEDER, PID2019-106125GB- I00/AEI/10.13039/501100011033 and PID2019-104124RB-I00/AEI/ 10.13039/501100011033 and by Community of Madrid by project TOP Heritage-CM (S2018/NMT-4372). M. O. thanks CSIC for contract.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multiphoton excitation fluorescence microscopy and spectroscopic multianalytical approach for characterization of historical glass grisailles

  • Oujja, Mohamed
  • Agua Martínez, Fernando
  • Morales-Martín, D.
  • García Heras, Manuel
  • Villegas Broncano, María Ángeles
  • Castillejo, Marta
12 pags., 5 figs., 4 tabs., The preservation of the integrity of artworks and cultural heritage items during characterization and conser-vation operations is of high priority, therefore, the application of non-invasive techniques is commonly suggested and recommended. Nonlinear optical microscopies (NLOM), based on the use of tightly focused pulsed femto-second lasers, are emerging techniques for structural and chemical analysis of heritage objects with micrometric lateral and axial resolution. The results obtained with a set of optical and spectroscopic techniques for the chemical and physical characterization of grisaille paint layers on historical stained glasses, from different chronologies and provenance in Spain, are presented in this work. Optical behaviour and chemical composition were investigated by NLOM, using a laboratory set-up in the modality of Multi-Photon Excitation Fluorescence (MPEF), and by a multi-analytical combination of Field Emission Scanning Electron Microscopy-Energy Dispersive X-ray Spectrometry (FESEM-EDS), Laser Induced Breakdown Spectrosocopy (LIBS) and Laser Induced Fluorescence (LIF). Thicknesses values of the historical grisaille paint layers measured with MPEF were compared with those retrieved through FESEM, showing significant consistency and agreement. Under proper conditions, analysis via MPEF microscopy avoids the photochemical and physical damage to the examined materials, thus ensuring their preservation. This approach paves the way for future in-situ, non-invasive strati-graphic investigations on cultural heritage objects., This research has been funded by the Spanish State Research Agency (AEI) through projects PID2019-104124RB-I00/AEI/10.13039/ 501100011033 and PID2019-104220RB-I00/AEI/10.13039/ 501100011033, by project TOP Heritage-CM (S2018/NMT-4372) from Community of Madrid, by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Her-itage Science, GA 871034) and supported by CSIC Interdisciplinary Platform “Open Heritage: Research and Society” (PTI-PAIS). M.O. thanks CSIC for a contract. Finally, the authors acknowledge profes-sional support from the TechnoHeritage Network of Science and Tech-nology for the Conservation of Cultural Heritage., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nonlinear optical microscopy for artworks physics

  • Dal Fovo, A.
  • Castillejo, Marta
  • Fontana, Raffaella
46 pags., 22 figs., Nonlinear optical microscopies (NLOMs) are innovative techniques recently introduced in the field of cultural heritage for the non-invasive in-depth analysis of artworks. In this review, we report on the state-of-the-art of NLOMs on different artistic materials, i.e., varnish, glue, paint, wood, parchment, and metal, and we evaluate the potential and capabilities of NLOMs in comparison with other more established linear optical techniques. We also discuss the latest studies defining suitable measurement conditions and instrumental requirements for the safe and in situ application of NLOMs on real cases., This research has been funded by Regione Toscana (POR FSE 2014-2020, “Giovanisì”, Intervention Program “CNR4C”, CUP B15J19001040004), by the Spanish State Research Agency (AEI) through project PID2019-104124RB-I00/ AEI /1.0.13039/501100011033, by the TOP Heritage-CM (S2018/NMT-4372) program, by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034) and is supported by CSIC Interdisciplinary Platform “Open Heritage: Research and Society” (PTI-PAIS)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization of medieval-like glass alteration layers by laser spectroscopy and nonlinear optical microscopy

  • Oujja, Mohamed
  • Palomar Sanz, Teresa
  • Martínez-Weinbaum, Marina
  • Martínez-Ramírez, S.
  • Castillejo, Marta
22 pags., 7 figs., 3 tabs., Historical glass-based objects undergo, since the time of their manufacture, different degradation phenomena that are related to their composition and to the environment to which they were exposed. Three-dimensional (3D) structural and chemical characterization of the degradation layers is important to select the most adequate conservation strategies for glass objects. Optical microscopy (OM) is the most frequently used non-destructive method to examine the surface of historical glasses; however, the 3D structural assessment of alteration layers requires applying the destructive modality of this technique to conduct a cross-sectional study. In this work, a different approach for structural and compositional characterization of alteration layers on model medieval-like glasses is presented, based on the combination of the laser spectroscopies of laser-induced breakdown spectroscopy (LIBS), laser-induced fluorescence (LIF) and FT-Raman, and the emerging, cutting edge technique of nonlinear optical microscopy (NLOM) in the modality of multiphoton excitation fluorescence (MPEF). The results obtained through this multi-analytical photonic approach were compared with those retrieved by examination of the surface and cross sections of the samples by OM and scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM–EDS). While the combination of LIBS, LIF and FT-Raman served to assess the composition of the various alteration layers, the use of MPEF microscopy allowed the non-destructive determination of the thicknesses of these layers, showing for both thickness and composition a good agreement with the OM and SEM–EDS results. Thus, the proposed approach, which avoids sample preparation, illustrates the capability of non-destructive, or micro-destructive in the case of LIBS, laser spectroscopies and microscopies for the in situ study of glass objects of historic or/and artistic value., This research has been funded by the Spanish State Research Agency (AEI) through projects PID2019-104124RB-I00/AEI/1013039/501100011033, the CSIC General Foundation (ComFuturo Programme), by project TOP Heritage-CM (S2018/NMT-4372) from Community of Madrid, by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034). Support by CSIC Interdisciplinary Platform “Open Heritage: Research and Society” (PTI-PAIS) is acknowledged. M.O. thanks CSIC for a contract. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Emission characteristics and dynamics of neutral, ionic and molecular species in a laser produced CaF2 plasma

  • Oujja, Mohamed
  • Camacho, J.J.
  • Paradela, D.
  • Castillejo, Marta
  • de Nalda, R.
15 pags., 12 figs., The emission characteristics of a laser-ablated calcium fluoride CaF plasma have been investigated using time and space optical emission spectroscopy. The plasma-plume was produced by focusing 266 nm, 15 ns pulses from a Nd: YAG laser on a calcium fluoride crystal substrate placed in a vacuum chamber. The emission observed in the plasma region is due to electronic relaxation of excited neutral Ca and F, ionic fragments Ca, Ca and F and molecular features of CaF (AΠ- XΣ, BΣ- XΣ and CΠ- XΣ) band systems. Plasma species were analyzed both as a function of the delay from the laser pulse incidence and location from the target surface. Spectroscopic diagnostics were employed to estimate time-resolved electron densities, electron temperatures and velocity expansion of different species. The results show a faster decay of the continuum emission, ionic F, Ca, Ca, F species than in the case of neutral Ca atoms and molecular species of CaF. Different excitation temperatures were measured by comparing Ca and F atomic/ionic Saha-local thermodynamic equilibrium (LTE) spectra with experimental ones at various delay times after the ablation event. Vibrational temperatures of CaF were assessed from the temporal analysis of the AΠ - XΣ Δv = 0 band sequence molecular emission. We observed a non-equilibrium plasma although the plasma is found to maintain partial LTE., This research was supported by the Spanish State Research Agency (AEI) and the European Regional Development (FEDER) through Projects PID2019-104124RB-I00/AEI/10.13039/501100011033 and PID2019-106125GB-I00/AEI/10.13039/501100011033; the European H2020 IPERION HS Project (Integrated Platform for the European Research Infrastructure ON Heritage Science (GA 871034, WP5)); TOP Heritage-CM (S2018/NMT-4372) project from the Community of Madrid and with the support of Plataforma Temática Interdisciplinar of CSIC “Patrimonio Abierto: Investigación y Sociedad” (PTI-PAIS).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of smooth amorphous thin films of silicon carbide with controlled properties through pulsed laser deposition

  • Oujja, Mohamed
  • Tabakkouht, K.
  • Sanz, Mikel
  • Rebollar, Esther
  • Sánchez-Arenillas, M.
  • Marco, J.F.
  • Castillejo, Marta
  • de Nalda, R.
10 pags., 5 figs., 1 tab., Thin films of silicon carbide (SiC) on Si (100) and SrTiO (100) substrates have been grown by nanosecond pulsed laser deposition (PLD) with a Q-switched Nd:YAG laser operating at the wavelengths of 1064, 532 and 266 nm. The deposits obtained consisted of smooth and uniform layers of amorphous SiC, free of holes and cracks, with thicknesses in the range of 30–100 nm and average roughness substantially lower than 1 nm. The role of laser wavelength and of substrate temperature (300 K vs. 1025 K) on morphology, crystallinity and composition of the deposits was assessed. The films were analyzed by X-ray diffraction, micro-Raman spectroscopy and X-ray photoelectron spectroscopy. In addition, optical emission spectroscopy was employed to evaluate the characteristics of the ablation plasma and its correlation with the film growth., This research was supported by the Spanish State Research Agency (AEI) and European Regional Development (FEDER) through Projects PID2019-106125GB-I00/AEI/0.13039/501100011033 and PID2019-104124RB-I00/AEI/0.13039/501100011033. Thanks are given to the Soft and Polymeric Matter group (IEM-CSIC) for the use of AFM. We are grateful to M. Furió from MNCN-CSIC and P. Gonzalez from ICTP-CSIC for Raman and X-ray difraction technical assistance, respectively. Funding Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spectroscopic and Microscopic Characterization of Flashed Glasses from Stained Glass Windows

  • Palomar Sanz, Teresa
  • Martínez-Weinbaum, Marina
  • Aparicio, Mario
  • Maestro-Guijarro, Laura
  • Castillejo, Marta
  • Oujja, Mohamed
18 pags., 6 figs., 3 tabs. -- This article belongs to the Special Issue Interdisciplinary Researches for Cultural Heritage Conservation, Flashed glasses are composed of a base glass and a thin colored layer and have been used since medieval times in stained glass windows. Their study can be challenging because of their complex composition and multilayer structure. In the present work, a set of optical and spectroscopic techniques have been used for the characterization of a representative set of flashed glasses commonly used in the manufacture of stained glass windows. The structural and chemical composition of the pieces were investigated by optical microscopy, field emission scanning electron mi-croscopy‐energy dispersive X‐ray spectrometry (FESEM‐EDS), UV‐Vis‐IR spectroscopy, laser‐in-duced breakdown spectroscopy (LIBS), and laser‐induced fluorescence (LIF). Optical microscopy and FESEM‐EDS allowed the determination of the thicknesses of the colored layers, while LIBS, EDS, UV‐Vis‐IR, and LIF spectroscopies served for elemental, molecular, and chromophores characterization of the base glasses and colored layers. Results obtained using the micro‐invasive LIBS technique were compared with those retrieved by the cross‐sectional technique FESEM‐EDS, which requires sample taking, and showed significant consistency and agreement. In addition, LIBS results revealed the presence of additional elements in the composition of flashed glasses that could not be detected by FESEM‐EDS. The combination of UV‐Vis‐IR and LIF results allowed precise chemical identification of chromophores responsible for the flashed glass coloration., This research has been funded by the Spanish State Research Agency (AEI) through project PID2019-104124RB-I00/AEI/10.13039/501100011033, the Fundación General CSIC (ComFuturo Programme), by project TOP Heritage-CM (S2018/NMT-4372) from Community of Madrid, and by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparison of the Use of Traditional Solvents and Nanosecond 213 nm Nd:YAG Laser in Thinning Naturally Aged Varnish on a Contemporary Oil Easel Painting

  • Martínez-Weinbaum, Marina
  • Lozano-Carbó, Miriam
  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Oujja, Mohamed
  • Castillejo, Marta
11 pags., 7 figs., 2 tabs. -- This article belongs to the Special Issue Cleaning Strategies for Cultural Heritage, The removal of aged varnish on artistic paintings is a delicate intervention and the use of UV laser for this purpose is of special relevance. In particular, the use of nanosecond-pulsed lasers operating at 213 nm has been noted to produce good results in mock-up samples, but it has not been tested in real artworks. In this paper, we report on the application of this procedure for the first time on a contemporary oil easel painting with naturally aged varnish. The obtained results were compared with those achieved using traditional solvents, specifically a mixture of ligroin:acetone. Additionally, hot water was used to remove surface dirt. The performance of the different cleaning procedures was assessed with a range of techniques, including low-power microscopy, UV lamp illumination, laser-induced fluorescence (LIF), and laser-induced breakdown spectroscopy (LIBS). Of the tested treatments, the best performance is obtained by nanosecond laser irradiation at 213 nm using an adequate laser fluence (typically 0.14 J/cm2) that allows controlled and efficient removal of the outermost aged varnish layer without affecting the underlying non-aged varnish and paint layers., This research was funded by the Spanish State Research Agency (AEI) through the project SCOCHLAS (Study and Conservation of Cultural Heritage with Lasers, PID2019-104124RB-I00/AEI/1013039/501100011033), by the Community of Madrid through the project Top Heritage-CM (Tecnologías en Ciencias del Patrimonio, S2018/NMT_4372), and by the H2020 project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034). L. Maestro-Guijarro’s participation was financed by a Youth Guarantee contract (CAM20_IQFR_AI_06) from the Community of Madrid., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laser-based techniques for the non-invasive characterisation of grisaille paints on stained-glass windows

  • Machado, Carla
  • Oujja, Mohamed
  • Cerqueira Alves, Luis
  • Martínez-Weinbaum, Marina
  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Castillejo, Marta
  • Vilarigues, Márcia
  • Palomar Sanz, Teresa
Grisaille was the first paint applied on stained-glass panels, used in Europe since the twelfth century. Historical written sources described the use of iron and copper together with a high lead-silica base glass in the grisailles production. This project aims to study the evolution of the grisaille paint composition throughout time and the changes in the raw materials used in their production using non-destructive and non-invasive techniques. To achieve this objective, 23 grisaille samples dated from the 13th to the twentieth centuries from nine different countries (Portugal, Poland, United Kingdom, Sweden, Norway, Belgium, Low Countries, Germany, and France) were studied by means of micro particle-induced X-ray emission (μ-PIXE), micro energy dispersive X-ray fluorescence (μ-EDXRF), laser-induced breakdown spectroscopy (LIBS), laser-induced fluorescence (LIF), non-linear optical microscopy (NLOM) in the modality of multiphoton excitation fluorescence (MPEF) and optical microscopy (OM). The results showed that it was possible to identify compositional differences and patterns throughout the samples when compared with literature results. The preference for using copper in central and south-central European countries and the addition of new compounds (CoO, Cr2O3, MnO) as colouring agents since the nineteenth century was verified. The LIBS analyses allow the identification of boron on two samples, confirming the change of base glass components since the seventeenth century. The NLOM-MPEF showed the capability of this technique to measure the grisaille paint layers’ thickness. This non-invasive multi-analytical and complementary approach proves itself efficient in identifying changes in the grisaille’s composition throughout time, which can be interpreted as changes in the raw materials and manufacture used in the production of these paint materials., This research has been funded by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034), by the Spanish State Research Agency (AEI) through project PID2019-104124RB-I00/AEI/, by the Fundação de Ciência e Tecnologia de Portugal (project ref. UIDB/EAT/00729/2020, UIDP/00729/2020, LA/P/0008/2020, UIDB/ 04349/2020 and PTDC/ART-PER/1702/2021, researcher grant CEECIND/02249/2021 and doctoral grant ref. PD/BD/136673/2018) and by project TOP Heritage-CM (S2018/NMT-4372) from Community of Madrid., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reflectance Spectroscopy as a Novel Tool for Thickness Measurements of Paint Layers

  • Dal Fovo, A.
  • Martínez-Weinbaum, Marina
  • Oujja, Mohamed
  • Castillejo, Marta
  • Fontana, Raffaella
A major challenge in heritage science is the non-invasive cross-sectional analysis of paintings. When low-energy probes are used, the presence of opaque media can significantly hinder the penetration of incident radiation, as well as the collection of the backscattered signal. Currently, no technique is capable of uniquely and noninvasively measuring the micrometric thickness of heterogeneous materials, such as pictorial layers, for any painting material. The aim of this work was to explore the possibility of extracting stratigraphic information from reflectance spectra obtained by diffuse reflectance spectroscopy (DRS). We tested the proposed approach on single layers of ten pure acrylic paints. The chemical composition of each paint was first characterised by micro-Raman and laser-induced breakdown spectroscopies. The spectral behaviour was analysed by both Fibre Optics Reflectance Spectroscopy (FORS) and Vis-NIR multispectral reflectance imaging. We showed that there is a clear correlation between the spectral response of acrylic paint layers and their micrometric thickness, which was previously measured by Optical Coherence Tomography (OCT). Based on significant spectral features, exponential functions of reflectance vs. thickness were obtained for each paint, which can be used as calibration curves for thickness measurements. To the best of our knowledge, similar approaches for cross-sectional measurements of paint layers have never been tested., This research was funded by the Spanish State Research Agency (AEI) through project PID2019-104124RB-I00/AEI/10.13039/501100011033, by project TOP Heritage-CM (S2018/NMT-4372) from Community of Madrid, and by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In-depth structural and compositional assessment of aged terpenoid varnish layers by nonlinear optical microscopy

  • Martínez-Weinbaum, Marina
  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Siano, S.
  • Ciofini, D.
  • Castillejo, Marta
  • Oujja, Mohamed
11 pags., 6 figs., 3 tabs., Varnishes are employed in painted artworks for protection from atmospheric pollution and oxidation and for improving the esthetic appearance by providing an even and brilliant surface finish. Also, in some cases, colored varnishes are applied intentionally to modify the chromatic appearance of paintings. Varnishes undergo complex and differentiated structural and chemical changes over time depending on their composition and conservation conditions. The present work investigates the extent of degradation of the outermost layers of varnish coatings due to aging as a function of depth by using nonlinear optical microscopy (NLOM) in the modality of multiphoton excitation fluorescence (MPEF). This non-invasive technique has been employed for the determination of the thickness, with a microscopic axial and lateral resolution, of the affected regions of pictorial terpenoid varnish layers, such as dammar, mastic, shellac and sandarac, subjected to various types and degrees of aging, artificial, natural and a combination of both. A homemade nonlinear optical microscope, based on a tightly focused pulsed femtosecond laser emitting at 800 nm, was used for the investigation. Single-photon laser-induced fluorescence (LIF) measurements served to determine the degree of surface aging and the optimum NLOM-MPEF operating conditions and helped to interpret the results obtained by applying the latter. These results signpost the correlations between the extent of degradation, non-invasively determined by NLOM-MPEF, the type and length of aging, the nature of the varnish and the initial thickness of the varnish layer., This research has been funded by the Spanish State Research Agency (AEI) through project PID2019-104124RB-I00/AEI/1013039/501100011033, by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034), and by the Community of Madrid project Top Heritage-CM (Tecnologías en Ciencias del Patrimonio, S2018/NMT_4372). Support by CSIC Interdisciplinary Platform “Open Heritage: Research and Society” (PTI-PAIS) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessment of silver-based calcium silicate hydrate as a novel SERS sensor

  • Maestro-Guijarro, Laura
  • Martínez-Ramírez, S.
  • Sánchez-Cortés, Santiago
  • Marco, J.F.
  • de la Figuera, Juan
  • Castillejo, Marta
  • Oujja, Mohamed
  • Carmona-Quiroga, Paula
8 pags., 10 figs., 2 tabs., This study aims at synthesizing a novel Surface-Enhanced Raman Spectroscopy (SERS) sensor based on a nanostructured substrate, calcium silicate hydrate (C-S-H), the main hydration product of Portland cement. The procedure involves first the incorporation of silver within the nanostructure of the gel (C-S-Ag-H) and second the modification of the surface of pellets of the newly synthesized material by laser irradiation at 532 nm or 355 nm. The assessment of the SERS activity revealed no amplification of the organic molecule rhodamine B (RdB) signal, used as a probe, on the C-S-Ag-H before laser irradiation. However, after laser irradiation, the SERS effect was comparable to that of reference colloidal Ag nanoparticles (NPs). This SERS response is attributed to an increase in the concentration of metallic silver on the surface of the C-S-Ag-H pellets upon laser irradiation and material ablation as revealed by X-ray Photoelectron Spectroscopy (XPS). Further enhancement of the SERS signals was induced by depositing colloidal Ag NPs on the irradiated pellets, giving rise to interparticle hot spots where the electromagnetic field is further intensified., This research has been funded by MCIN/AEI/10.13039/501100011033 through projects PID2022-137017OB-I00, PID2020-113900RB-I00 and PID2019-104124RB-I00 and by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034). Support by CSIC Platform “Open Heritage: Research and Society” (PTI-PAIS) is acknowledged. L. Maestro-Guijarro’s participation was financed by a Youth Guarantee contract (CAM20_IQFR_AI_06) from the Community of Madrid., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quantitative spectroscopic characterization of laser-induced effects on oil paint films using 213, 266, or 2940 nm

  • Ciofini, D.
  • Martínez-Weinbaum, Marina
  • Castillejo, Marta
  • Oujja, Mohamed
  • Chillé, C.
  • Siano, S.
  • Osticioli, I.
11 pags., 6 figs., 3 tabs., Removal of aged varnish layers from easel paintings is a challenging task requiring methodologies capable of preventing any alteration of the underlying painted surface. Laser-ablation approaches using the fourth and fifth harmonics of a Q-Switched Nd:YAG (266 and 213 nm, 15 ns) and Free-Running Er:YAG laser (2940 nm, 160 µs pulses) can allow for very thin removal rates but their discrimination of the underlying paint film and self-termination potential are very limited. Thus, there is a need to develop suitable analytical methods for promptly identifying the possible occurrence of any undesired effect on the paint layer beneath the varnish, which is intentionally or unintentionally irradiated during the laser thinning treatment. Such side effects depend on the irradiation parameters and the specific material features of the pictorial film. Linseed oil paint models were prepared using lead white, vermilion, chrome yellow, ultramarine, Prussian blue and zinc white. Two distinct pigment volume concentrations (PVC) were used to investigate the dependence of the laser-induced alterations on oil binder volume ratio: low PVC (gloss paint) and high PVC (matte paint). After determining threshold exposure limits for each laser wavelength, laser-induced effects slightly above the threshold fluence were qualitatively and quantitatively assessed using FTIR and µ-Raman spectroscopies. Results showed that IR-reflectance bands of glossy and matte films exhibited appreciable shifts and distortion upon laser irradiation while reductions of the signal-to-background ratio were observed in µRaman spectra. The developed method, based on the processing of a number of spectral acquisitions, enabled for the first time the quantitative assessment and comparison of the corresponding undesired laser-induced effects in the outermost painted layer., The financial support of this work has been provided by the H2020 project IPERION HS (GA 871034), by CNR through the Short-Term Mobility Program (STM 2021), by the project CNR4CPLAS@rt” co-financed by the Tuscany Region and El.En. S.p.A., and by the Spanish State Research Agency (AEI) through projects PID2019-104124RB-I00/AEI/1013039/501100011033 and PID2022- 137017OB-I00/AEI/1013039/501100011033. Support from CSIC Interdisciplinary Platform “Open Heritage: Research and Society” (PTI-PAIS) is acknowledged., Peer reviewed