Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Combined infrared-ultrasonic positioning system to improve the data availability

  • Aparicio Esteve, Elena|||0000-0001-7886-312X
  • Ureña Ureña, Jesús|||0000-0003-1408-6039
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Villadangos Carrizo, José Manuel|||0000-0001-5900-0978
This work was supported in part by MCIN/AEI/10.13039/501100011033 and EU “NextGenerationEU”/PRTR (ref. TED2021-131773B-I00) Proyectos, Many indoor positioning applications related to accurate monitoring and tracking targets require centimeter precision. Infrared (IR)- and ultrasound (US)-based systems represent a feasible approach providing high robustness against interference. Furthermore, their combination may achieve better performance by mitigating their complementary drawbacks, covering larger areas, and improving the availability of positioning measurements. In this context, this work presents the proposal and experimental evaluation of a tightly coupled fusion method that uses an extended Kalman filter (EKF) to merge an IR- and a US-based positioning system. An outlier detection method is considered to select measurements with an adequate performance. Experimental results reveal that the IR and US systems are unable to position in 4.08% and 26.06% of locations, whereas the combined IR -US system has 100% of availability. In addition, the merged solution achieves less than 4 cm of positioning error in 90% of cases, outperforming the IR and US systems when they work independently., Agencia Estatal de Investigación, Universidad de Alcalá, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Definition of a FPGA-based SoC architecture for PRBS transmission in optical spectroscopy

  • Tapiador Luque, Miguel
  • Escobar Vera, Camilo José
  • Soriano Amat, Miguel|||0000-0002-4819-3898
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
Optical spectroscopy is a well-known tool typically employed for characterizing the properties of materials by analyzing their iteration with light. One of the most spread techniques is the dual comb spectroscopy, since it accomplishes ultra-high resolution, and high sensitivity measurements with a relatively simple platform including a single, relatively narrowband photodetector. The employed optical dual comb can be implemented through electro-optical (EO) modulation driven by pseudo-ransom binary sequences (PRBS) at high data rates, commonly in the range of tens of Gbps. For that purpose, the runtime generation and transmission of adaptive PRBS is still an open challenge, often involving expensive and not flexible high-speed digital systems, with a few commercially available solutions that sometimes do not match the application requirements efficiently. In this context, this work describes the definition and implementation of a System-on-Chip (SoC) architecture, based on a FPGA device, capable of generating and transmitting two PRBS for a dual comb, at a data rate up to 5 Gbps. The architecture can be configured and its operation modified in run time, thanks to the general-purpose processor involved, in charge of managing an Ethernet link to receive new PRBS to be transmitted or set up certain parameters. The proposed design has been validated experimentally on a dual comb spectroscopy measurement, where the absorption of a hydrogen cyanide (HCN) gas cell has been successfully characterized., Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Model-Driven Deep Learning for Massive Access Internet of Things Networks

  • Dang, Xiaobing
  • Xiang, Wei
  • Yuan, Lei
  • Yang, Yuan
  • Cheng, Peng
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
In the context of massive machine-type communications (mMTC) within the Internet of Things (IoT), joint activity detection and channel estimation (JADCE) is a key challenge in enabling massive access due to sporadic device access patterns. In this work, we consider both single-antenna and multiple-antenna base station scenarios and formulate the JADCE problem using the least absolute shrinkage and selection operator (LASSO) framework. To address this problem, we propose a model-driven network that utilizes compressive sensing (CS) and deep learning techniques. Specifically, we first design a prediction-correction alternating direction method of multipliers (PC-ADMM) as the underlying algorithm of the model-driven network. Then, the network is developed based on the PC-ADMM and is designed to be complex-valued. Furthermore, we also model the proximal operator, typically used to generate sparse solutions in LASSO, as a channel attention module within the model-driven network to enhance robustness. Numerical results show that the proposed PC-ADMM framework outperforms existing LASSO-based methods in terms of channel estimation and device activity detection., Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Activity monitoring and location sensory system for people with mild cognitive impairments

  • García Requejo, Alejandro|||0000-0002-4955-8852
  • Pérez Rubio, María del Carmen|||0000-0001-8271-6843
  • Villadangos Carrizo, José Manuel|||0000-0001-5900-0978
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
Cognitive impairment diseases are becoming more and more prevalent mainly due to population ageing and the increase in life expectancy. Sensory and monitoring systems may allow people with mild cognitive impairments (MCI) or at early stages of dementia to live at home for longer with more independence and security. This work presents a Wireless Sensor Network (WSN) based on wearables that obtains indoor and outdoor location and step information, reporting them over a LoRaWAN network. Each Wireless Wearable Sensor (WWS) uses a Global Navigation Satellite System module for outdoor positioning, a proposed indoor roomlevel localization system based on infrared sensors, an accelerometer for a step detector algorithm, and a LoRa (Long-Range) radio link to send the measured information with low power consumption achieving a large coverage range. These sensory data are recorded in a database and presented to the medical services and caregivers through a user web application. This can be used to detect anomalous changes in daily patients? routines, as well as to know the user?s position in cases where the patient may be disoriented. In addition, alerts are launched in caregivers? smartphones to report about any risky situation, such as the patient leaving an allowed area or staying in one place for too long. Therefore, the proposed sensory system may support and extend the ability of people with MCI or at early stages of dementia to live independently, it helps detect behavioural changes and it keeps caregivers? peace of mind., European Commission, Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Ultrasonic Device-Free Localization System Using Orthogonal Chirp-Based Multistatic Sonar

  • García Requejo, Alejandro|||0000-0002-4955-8852
  • Pérez Rubio, María del Carmen|||0000-0001-8271-6843
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Wright, William M. D.
This work was supported in part by MCIN/AEI/10.13039/501100011033 and EU “NextGenerationEU”/PRTR (ref. TED2021-131773B-I00), Indoor device-free localization (DFL) systems offer an alternative paradigm to traditional location, in which the target to be located does not need to carry any sensor, tag, or electronic device. In contrast to most popular DFL systems, which are based on radio frequency technologies, ultrasonic signals have been used in this work, due to their good accuracy results, to estimate the 3-D position of a person's head. For this purpose, a four-emitter and a single-receiver multistatic sonar installed overhead has been employed. The emission signals follow a time division orthogonal chirp division multiplexing (TD-OCDM) access technique to obtain a 300 ms update time and asynchronous operation. The signals propagated in the indoor space are acquired by the receiver and processed. A sign-data least mean square (SD-LMS) adaptive filter algorithm has been applied in order to remove the background components on the received signal. Then, a specific window from the resulting clean signal is employed to determine the reflected signal at the target time-of-arrival (ToA) by using an adaptive threshold. The ToA obtained, together with the direct path ToA between emitters and the receiver, provide ranges to compute the target location using a localization algorithm. A simulator was used to analyze the proposal, estimating the coverage area of the system at 3.14 m(2). Several experiments have been performed with a single user placing the multistatic sonar at heights of 2.60 and 2.80 m above the floor within the coverage area. The results achieved positioning errors lower than 9 cm for the 2.60-m height and 11.6 cm at 2.80 m in 90% of the cases., Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

HIFDA - High-Frequency Electrical Voltage and Current Signals from Household Appliances

  • Navarro Pérez, Víctor Manuel
  • Barragán Frías, Marta
  • Nieto Capuchino, Rubén|||0000-0002-8293-9665
  • Ureña Ureña, Jesús|||0000-0003-1408-6039
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
This work was supported in part by MCIN/AEI/10.13039/501100011033 and EU “NextGenerationEU”/PRTR (ref. TED2021-131773B-I00), The increasing demand for efficient energy management in smart grids has led to the development of various Non-Intrusive Load Monitoring (NILM) techniques. These aim to disaggregate energy consumption and classify appliances using data from a single-point smart meter at a household's grid mains. With the use of machine learning methods, NILM solutions increasingly rely on datasets for training and validation. While datasets like WHITED, BLOND, and UK-DALE provide insights into consumption patterns, they face limitations such as lack of steady-state data, complicated ground-truth or low sampling rates, which hinder detecting low-power appliances. High sampling rates, however, improve classification accuracy and enable identifying these devices. This study introduces the HIgh Frequency household electrical signals DAtaset (HIFDA), a high-frequency dataset capturing steady-state signals from 14 household appliances at 100 kSPS, including the empty grid. Data, collected via a custom System-on-Chip (SoC) device, focuses on active consumption and includes multiple time windows. HIFDA, hosted on Zenodo, ensures its suitability for modern NILM research and other applications., Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

A comparison between autocorrelation- and crosscorrelation-based coarse frame synchronization schemes for OFDM-PLC systems

  • Colombo, Martín Alejandro
  • Ureña Ureña, Jesús|||0000-0003-1408-6039
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Marziani, Carlos Manuel de
  • Mayosky, Miguel Ángel
Orthogonal frequency division multiplexing (OFDM)-based Power-Line Communications (PLC) systems are vulnerable to synchronization errors, and the particularities of the PLC channel affect the performance of the synchronization process. In this context, this work is focused on the initial pilot symbol detection, presenting a comparison between autocorrelation- (AC) and crosscorrelation (CC)-based timing metrics, which include the most common preamble-based synchronization strategies. Two robust timing metrics are defined and the effect of multipath, Colored Background Noise (CBN) and Impulsive Noise (IN) is theoretically evaluated on each. A detailed analysis of the probability distributions of the timing metrics is performed and primary detection thresholds and lower bounds for the symbol detection probability are derived. Simulations of the OFDM-PLC system are performed in order to validate the analysis, considering a statistic PLC channel model and different noise sources. Results show that the CBN and IN significantly degrade the timing metrics behavior, and that the CC-based timing metric is more robust to this worsening, thus achieving a better synchronization performance than the AC-based timing metric., Agencia Estatal de Investigación