Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Interaction between SARS-CoV-2 spike glycoprotein and human skin models: a molecular dynamics study

  • Domingo, Marc
  • Faraudo, Jordi
The possibility of contamination of human skin by infectious virions plays an important role in indirect transmission of respiratory viruses but little is known about the fundamental physico-chemical aspects of the virus-skin interactions. In the case of coronaviruses, the interaction with surfaces (including the skin surface) is mediated by their large glycoprotein spikes that protrude from (and cover) the viral envelope. Here, we perform all atomic simulations between the SARS-CoV-2 spike glycoprotein and human skin models. We consider an "oily" skin covered by sebum and a "clean" skin exposing the stratum corneum. The simulations show that the spike tries to maximize the contacts with stratum corneum lipids, particularly ceramides, with substantial hydrogen bonding. In the case of "oily" skin, the spike is able to retain its structure, orientation and hydration over sebum with little interaction with sebum components. Comparison of these results with our previous simulations of the interaction of SARS-CoV-2 spike with hydrophilic and hydrophobic solid surfaces, suggests that the"soft" or "hard" nature of the surface plays an essential role in the interaction of the spike protein with materials., This work was supported by the Spanish Ministry of Science and Innovation through Grant No. RTI2018-096273-B-I00, the “Severo Ochoa” Grant No.CEX2019-000917-S for Centres of Excellence in R&D awarded to ICMAB and the FPI grant PRE2020- 093689 awarded to M.D. We thank the CESGA supercomputing center for computer time and technical support at the Finisterrae supercomputer. M.D. is enrolled in the Material Sciences PhD program of the Universitat Autonoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laser processing of graphene and related materials for energy storage: State of the art and future prospects

  • Kumar, Rajesh
  • Pérez del Pino, Ángel
  • Sahoo, Sumanta
  • Singh, Rajesh Kumar
  • Tan, Wai Kian
  • Kar, Kamal K.
  • Matsuda, Atsunori
  • Joanni, Ednan
Laser-based methodologies for synthesis, reduction, modification and assembly of graphene-based materials are highly demanded for energy-related electrodes and devices for portable electronics. Laser technologies for graphene synthesis and modification exhibit several advantages when compared to alternative methods. They are fast, low-cost and energy saving, allowing selective heating and programmable processing, with controlled manipulation over the main experimental parameters. In this review, we summarize the most recent studies on laser-assisted synthesis of graphene-based materials, as well as their modification and application as electrodes for supercapacitor and battery applications. After a brief introduction to the physical properties of graphene and a discussion of the different types of laser processing operations, the practical uses of laser techniques for the fabrication of electrode materials are discussed in detail. Finally, the review is concluded with a brief discussion of some of the outstanding problems and possible directions for research in the area of laser-based graphene materials for energy storage devices., This research was supported by the financial assistance from the Science and Engineering Research Board (SERB), Department of Science & Technology (DST), New Delhi under Ramanujan Fellowship Award (SB/S2/RJN-159/2017) and JSPS KAKENHI Grant JP-18F18063. The author (A.P. Pino) thanks the financial support of MCIN/AEI/ 10.13039/501100011033 under the project PID2020-116612RB-C31 and support from AGAUR of Generalitat de Catalunya through projects 2017 SGR 1086 and 2017 SGR 1771. ICMAB acknowledges financial support from MCIN/AEI/ 10.13039/501100011033, through Severo Ochoa FUNFUTURE grant (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Computer Simulation of the interaction between SARS-CoV-2 Spike Protein and the Surface of Coinage Metals

  • Sahihi, Mehdi
  • Faraudo, Jordi
Coinage metals like silver, gold and copper are historically known as materials with anti-infective properties; but the mechanism behind these properties is not yet clear, and several features seem to be effective in this regard. Here, we used an all-atom molecular dynamics simulation method to investigate the interaction of up and down conformations of the S1 subunit of the SARS-CoV-2 spike protein with the (100) surface of Au, Ag and Cu. Our results revealed that spike protein is adsorbed onto the surface of these metals, being the Cu-metal with the highest interaction with the spike and Au, the metal which induces bigger structural changes in the spike. In our simulations, we considered the spike protein in both its up and down conformations. We found that the affinity of the metals for the up-conformation was higher than their affinity for the down conformation of the spike protein due to the interactions with the receptor binding domain that is exposed in the up conformation but hidden in the down conformation. Comparing the present results for metals with those obtained in our previous MD simulations with other materials (cellulose, graphite, and human skin models), we see that Au induces the highest structural change in the spike, larger than those obtained in our previous studies., This work was supported by Grant PID2021-124297NB-C33 funded by MCIN/AEI/ 10.13039/501100011033 and, as appropriate, by “ERDF A way of making Europe”, by the “European Union” or by the “European Union NextGenerationEU/PRTR” and by the “Severo Ochoa” Program for Centers of Excellence in R&D (CEX2019-000917-S) awarded to ICMAB. We thank the Spanish national supercomputing network (BSC-RES) for the award of computer time at the Minotauro supercomputer. M Sahihi is supported by the European Union Horizon 2020 research and innovation programme under Marie Sklodowska-Curie Action Individual Fellowship Grant Agreement No. 101026158., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microscopic mechanism of ferroelectric properties in barium hexaferrites

  • Turchenko, Vitalii
  • Bondyakov, A. S.
  • Trukhanov, Sergei
  • Fina, Ignasi
  • Korovushkin, V. V.
  • Balasoiu, Maria
  • Polosan, Silviu
  • Bozzo, Bernat
  • Lupu, Nicoleta
  • Trukhanov, Alex
The microscopic mechanism of the occurrence of ferroelectric properties in M-type barium hexaferrites is investigated by experimental and first-principle computation methods. The analysis of magnetic, X-ray, and Mössbauer measurements of BaFe12O19 samples ascertains the correlation between the thermal factor in the process of annealing samples and their functional properties. The occurrence of the remnant polarization in barium hexaferrites at room temperature contradicts the description of their crystal structure in the framework of centrosymmetric space group P63∕mmc (No. 194), in which one of the symmetry operations is inversion center. Therefore, the crystal structure of BaFe12O19 was analyzed in the frameworks of SG P63∕mmc (No. 194) and non-centrosymmetric SG P63mc (No. 186). The computed value of polarization for a non-centrosymmetric unit cell is ∼ 3.5 μC∕cm2. The analysis of polarization was carried out on a path connecting the polar P63mc and non-polar P63∕mmc structures and considered in terms of the total energy barrier. Our result allows ascertaining a direct relationship between the remnant polarization of the unit cell and the broken spatial-inversion symmetry in the crystal structure of M-type barium hexaferrite., This project has received funding from the EU - H2020 research and innovation programme under grant agreement No 654360 having benefitted from the access provided by CSIC/ICMAB in Barcelona (ES) within the framework of the Nanoscience Foundries and Fine Analysis (NFFA: ID 1026) Europe Transnational Access Activity. (European grants to support the infrastructure of European centres of collective usage and mobile activity of researchers). Alex V. Trukhanov thanks NUST MISIS for support within the framework of the “Priority 2030″ (K6-2022-043). The authors thank to Dr. D.B. Migas for help with calculations of initial crystal structures., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

X-ray diffraction study of epitaxial CuO nanostructures obtained through post-deposition annealing of Cu on SrTiO

_3
  • Santis, Maurizio de
  • Langlais, Veronique
  • Martinelli, Lucio
  • Mocellin, Tom
  • Pairis, Sébastien
  • Torrelles, Xavier
Orientation, structure and morphology in the early growth stages of CuO films on strontium titanate were studied by synchrotron radiation X-ray diffraction. Nanostructured CuO films were obtained by ex situ heat treatment at 970 K in oxygen flow at ambient pressure after an initial deposition of Cu on SrTiO$_3$(001) at $10^{-4}$ Pa oxygen pressure using the molecular beam epitaxy technique. These films at low coverages grow forming islands a few tens of nanometers wide, with the [010] direction perpendicular to the substrate surface. Two types of epitaxies are observed, CuO[001]//SrTiO$_3$[100] and CuO[100]//SrTiO$_3$[100], the former being the preferred one. The combination of these epitaxies with the P4mm surface symmetry of the substrate generates 16 different orientations of nanostructures. The lattice constant values obtained from X-ray diffraction are very close to those of bulk tenorite, with the exception of the monoclinic angle $\theta$, which is reduced from 99.54$^\circ$ to 96.76(8)$^\circ$ by the epitaxy constraints. This angle is a key parameter in determining the magnetic properties of CuO., We acknowledge the European Synchrotron Radiation Facility for provision of synchrotron radiation facilities and we would like to thank beamline staff for assistance in using beamline BM32 (French CRG IF). We thank Aude Bailly for helpful discussion and for a critical review of the manuscript. X.T., and V. L. acknowledge the public financial support of the CSIC ILINKA2021 Program through the ILINKA20394 project. X.T. also acknowledges grant PID2021–12327OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Formation of Mn-rich interfacial phases in Co2FexMn1-xSi thin films

  • Law, Ka Ming
  • Thind, Arashdeep S.
  • Pendharkar, Mihir
  • Patel, Sahil J.
  • Phillips, Joshua J.
  • Palmstrom, Chris J.
  • Gázquez, Jaume
  • Borisevich, Albina
  • Mishra, Rohan
  • Hauser, Adam J.
We report the formation of Mn-rich regions at the interface of Co2FexMn1-xSi thin films grown on GaAs substrates by molecular beam epitaxy (MBE). Scanning transmission electron microscopy (STEM) with electron energy loss (EEL) spectrum imaging reveals that each interfacial region: (1) is 1-2 nm wide, (2) occurs irrespective of the Fe/Mn composition ratio and in both Co-rich and Co-poor films, and (3) displaces both Co and Fe indiscriminately. We also observe a Mn-depleted region in each film directly above each Mn-rich interfacial layer, roughly 3 nm in width in the x = 0 and x = 0.3 films, and 1 nm in the x = 0.7 (less Mn) film. We posit that growth energetics favor Mn diffusion to the interface even when there is no significant Ga interdiffusion into the epitaxial film. Element-specific X-ray magnetic circular dichroism (XMCD) measurements show larger Co, Fe, and Mn orbital to spin magnetic moment ratios compared to bulk values across the Co2FexMn1-xSi compositional range. The values lie between reported values for pure bulk and nanostructured Co, Fe, and Mn materials, corroborating the non-uniform, layered nature of the material on the nanoscale. Finally, SQUID magnetometry demonstrates that the films deviate from the Slater-Pauling rule for uniform films of both the expected and the measured composition. The results inform a need for care and increased scrutiny when forming Mn-based magnetic thin films on III-V semiconductors like GaAs, particularly when films are on the order of 5 nm or when interface composition is critical to spin transport or other device applications., We acknowledge support from the National Science Foundation (NSF), USA through NSF-CAREER Award No. DMR-2047251. ICTS-CNME at UCM is acknowledged for offering access to STEM microscopy and expertise. ICMAB author acknowledges Spain’s Agencia Estatal de Investigación Severo Ochoa Program for Centers of Excellence in R&D (CEX2019-000917-S). The work at Washington University was supported by the NSF through awards # DMR-1806147 and DMR-2145797. A portion of the STEM experiments were performed at the Center for Nanophase Materials Sciences (CNMS), which is a US Department of Energy, Office of Science User Facility at Oak Ridge National Laboratory., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lead-free room-temperature ferroelectric thermal conductivity switch using anisotropies in thermal conductivities

  • Féger, Lucile
  • Escorihuela Sayalero, Carlos
  • Rampnoux, Jean-Michel
  • Kontou, Kyriaki
  • Bah, Micka
  • Íñiguez, Jorge
  • Cazorla, Claudio
  • Monot-Laffez, Isabelle
  • Douri, Sarah
  • Grauby, Stéphane
  • Rurali, Riccardo
  • Dilhaire, Stefan
  • Gomès, Séverine
  • Nataf, Guillaume F.
Materials with on-demand control of thermal conductivity are the prerequisites to build thermal conductivity switches, where the thermal conductivity can be turned ON and OFF. However, the ideal switch, while required to develop novel approaches to solid-state refrigeration, energy harvesting, and even phononic circuits, is still missing. It should consist of an active material only, be environment friendly, and operate near room temperature with a reversible, fast, and large switching ratio. Here, we first predict by ab initio electronic structure calculations that ferroelectric domains in barium titanate exhibit anisotropic thermal conductivities. We confirm this prediction by combining frequency-domain thermoreflectance and scanning thermal microscopy measurements on a single crystal of barium titanate. We then use this gained knowledge to propose a lead-free thermal conductivity switch without inactive material, operating reversibly with an electric field. At room temperature, we find a switching ratio of 1.6 $\pm$ 0.3, exceeding the performances of state-of-the-art materials suggested for thermal conductivity switches., We thank F. Barcella, R. Doineau, and B. Negulescu for technical support for aluminum sputtering. We thank J. C. A. Abanto for technical support for developing 3D simulation for SThM measurement post-treatment. This paper was cofunded by the European Union [European Research Council (ERC), DYNAMHEAT, Grant No. 101077402; European Program FP7-NMP-LARGE-7, QUANTIHEAT, Grant No. 604668]. We acknowledge financial support by MCIN/AEI/10.13039/501100011033 under Grant No. PID2020-119777GB-I00, the “Ramón y Cajal” fellowship RYC2018-024947-I and the Severo Ochoa Centres of Excellence Program (CEX2019-000917-S), by the Generalitat de Catalunya (2021 SGR 01519), and by the Luxembourg National Research Fund (C21/MS/15799044/FERRODYNAMICS). Some of this work has been performed on the CERTeM (microelectronics technological research and development center) technological platform supported by French region Centre Val de Loire, Tours Metropolis and FEDER funds., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Macroscopic Polarization from Nonlinear Gradient Couplings

  • Stengel, Massimiliano
We show that a lattice mode of arbitrary symmetry induces a well-defined macroscopic polarization at first order in the momentum and second order in the amplitude. We identify a symmetric flexoelectric-like contribution, which is sensitive to both the electrical and mechanical boundary conditions, and an antisymmetric Dzialoshinskii-Moriya-like term, which is unaffected by either. We develop the first-principles methodology to compute the relevant coupling tensors in an arbitrary crystal, which we illustrate with the example of the antiferrodistortive order parameter in SrTiO_{3}., We acknowledge support from Ministerio de Ciencia Y Innovación (MICINN-Spain) through Grant No. PID2019–108573 GB-C22; from Severo Ochoa FUNFUTURE center of excellence (CEX2019-000917-S); from Generalitat de Catalunya (Grant No. 2021 SGR 01519); and from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (Grant Agreement No. 724529)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

WorMe: A user-oriented software for Caenorhabditis elegans length determination

  • Llobet Lladó, Josep
  • Garriga Alonso, Núria
  • Muñoz Juan, Amanda
  • Laromaine, Anna
Caenorhabditis elegans is a widely used animal model for biomedicl research. The lenght of this nematode is commonly used to asses its evelopment and its health. Typically, measurements are performed manually; however, software has been developed to automate this process. Most of these tools are designed for stereomicroscope images, and none work reliably for compound microscopy images. Here we present WorMe, a user-friendly software that measures C.elegans length in compound microscopy images. The program is versatile in handling various image types and can be analyse multiple images collectively. Funthermore, the user can accept of discard the detected objects, separate joined worms, correct erroneous measurements, and manually add new worms. The length results are presented in a spreadsheet file, with earch measurement linked to its image. Graphic data can also be exported., The work has been supported partially with RTI2018-096273B-I00, PID2024-1576370B-I00 (BACTIVE), PDC2023-145826-I00 (BIOCCHIP), funded by MCIN/AEI//10.13039/501100011033/FEDER “Una manera de hacer Europa”; the “Severo Ochoa” Programme for Centres of Excellence, in R&D CEX2019-000917-S (FUNFUTURE), CEX2023-001263-S (MATRANS42); the Generalitat de Catalunya (2021SGR00446 Grant), and European Union’s Horizon Europe research and innovation program under grant agreement No 101057527 (NextGEM). AL participates in CSIC-Conexion Nanomedicina del CSIC, EPNOE network, and Red Nanocare 2.0, Grant RED2022-134560-T funded by MCIN/AEI/10.13039/501100011033, JLL acknowledges ayudas JAE ICU, Consejo Superior de Investigaciones Científicas (CSIC), JAEICU-21-ICMAB01 (2021) in the framework of the Master of Bioinformatics and Biostatistics (UOC, 2021), NGA acknowledges ayudas JAEIntro, Consejo Superior de Investigaciones Científicas (CSIC), JAEINT-24-01745, (2024), AMJ acknowledges the Ph.D. scholarship (FPU18/05190)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S). With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., No