Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Smart Beam Management for Vehicular Networks Using ML

  • Bharath-Reddy, G.
  • Montero, L.
  • Perez-Romero, J.
  • Molins-Benlliure, Jaime
  • Molina, J.
  • Romeu, J.
  • Jofre-R., L.
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] The mmWave frequencies will be widely used in future vehicular communications. At these frequencies, the radio channel becomes much more vulnerable to slight changes in the environment like motions of the device, reflections or blockage. In high mobility vehicular communications the rapidly changing vehicle environments and the large overheads due to frequent beam training are the critical disadvantages in developing these systems at mmWave frequencies. Hence, smart beam management procedures are desired to establish and maintain the radio channels. In this paper, we propose that using the positions and respective velocities of the vehicles in the dynamic selection of the beam pair, and then adapting to the changing environments using ML algorithms, can improve both network performance and communication stability in high mobility vehicular communications., This work was supported by the Spanish Comision Interministerial de Ciencia y Tecnologia (CICYT) under projects TEC2016-78028-C3-1-P and MDM2016-O6OO, Catalan Research Group 2017 SGR 21, and Industrial Doctorate programme (2018-DI-084) of Generalitat de Catalunya.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Vehicular mm-Wave Array for Smart Handover

  • Bharath Reddy, G.
  • Ramirez, G. A.
  • Molins-Benlliure, Jaime
  • Romeu, J.
  • Jofre-R., L.
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] The emergence of new technologies such as autonomous vehicles and high data rate 5G networks requires advanced antenna types that are capable of fulfilling requirements for highly demanding wireless communication links. The array of microstrip-fed slot-coupled patches is one such type of antenna that provides low return loss and good transient behaviour for broadband applications. A compact size slot-coupled patch antenna subarray and its phased array is proposed in this paper. Two different substrates Rogers TMM4 and Green TapeTM 951 Low Temperature Co-Fired Ceramic (LTCC) are considered for the fabrication of microstrip feedline. The feedline is fabricated on the respective substrates and then mounted on a Rogers RT/duroid 5880 laminate. Ground planes are used on both the front and backside of the antenna array. The antenna is operating in a range of 24.25 GHz - 29.5 GHz. A Smart Array is proposed in this paper which has a good performance in terms of antenna gain and scanning property for 5G application in Smart handovers., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects TEC2016-78028-C3-1- P, PID 2019-107885GB-C31, MDM2016-0600, and Catalan Research Group 2017 SGR 219.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Millimeter-wave MIMO array measurement system for imaging and channel characterization

  • Ballesteros Sánchez, Christian
  • Montero Bayo, Luca
  • Ramírez Arroyave, Germán Augusto
  • Dagatti, Mayco
  • Solano Pérez, José Antonio
  • Molina García-Pardo, José María
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
Millimeter-wave band offer unique characteristicsto obtain good spatial position and resolution of certain type oftargets. The aim of this paper is to study a near-field focusingtechnique applied to the imaging of different geometries, from ananalytical, numerical and experimental point of view. Millimeter-wave band scattering simulations are performed and comparedwith imaging reconstruction of experimental measurements,using a particular set-up and scenario. This work is a first stepto contribute to the growing need of sensing the environment andsurrounding objects of moving devices, such as new generationvehicles, in a clear and robust way with respect to other formsof sensing., This work was supported by the Spanish Ministry of Education and Science under projects 2019-107885GB-C31,TEC2016-78028-C3-1-P, TEC2016-78028-C3-2-P, TEC2016-78028-C3-3-P, MDM2016-0600, the Catalan Research Group 2017 SGR 219 and by the European FEDER funds. The Spanish Ministry of Education contributes via apredoctoral grant to the first author (FPU17/05561)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Optical beam steering network with multiband capability

  • Vega, Sara
  • Nuño Gómez, Daniel-Juan
  • Santos Blanco, M. Concepción
A multiwavelength (MW) optical true time delay Network (OTTDN) to feed a phased array antenna (PAA) is presented. Beam steering capabilities can be demonstrated when applying MW tuning. A Dual Electrode Mach Zehnder Modulator (DE-MZM) as radio frequency (RF) external modulating stage allows to tune the operative band avoiding severe Chromatic Dispersion (CD) fading to obtain a flattened response. A working example simulation of a 4 elements array at 8 GHz shows the RF multiband spectral flat response potential of the technique, as well as the network conditions needed for beam steering with free-lobe operation., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects TEC2016-78028-C3-1- P, PID 2019-107885GB-C31, MDM2016-0600, and Catalan Research Group 2017 SGR 219., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Antenna packaging for in-body applications

  • Romeu Robert, Jordi
  • González López, Giselle
  • Blanch Boris, Sebastián
  • Jofre Roca, Lluís
A cylindrical mode expansion of the fields produced by an embedded antenna is used to determine the dimensions of the antenna packaging in order to minimize antenna impedance changes when the antenna is immersed in a varying dielectric medium., This work was supported by the Spanish “Comision Interministerial de Ciencia y Tecnologia” (CICYT) under projects TEC2016-78028-C3-1P, MDM2016-O6OO, and Catalan Research Group 2017 SGR 219., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Characterization of THz radiation by collimated wavefront aperture raster scanning

  • Nuño Gómez, Daniel-Juan
  • Santos Blanco, M. Concepción
  • Gomez Diaz, J. Sebastian
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
We present measurements for characterization of the beam profile and polarization pattern of lens-coupled photoconductive antennas (PCAs) at THz frequencies using a setup with antennas at fixed positions and a movable aperture placed in between collimating THz lenses. The measured beam patterns for co-polar and cross-polar components reveal the expected Airy disc and quadrupole behavior, respectively. The temporal evolution of the polarization in the directions of maximum cross-polar component follows a single-cycle circle with opposite handedness at each side of the antennas line-of-sight (LOS). Results are consistent with those obtained with fiber-coupled movable antennas, while enjoying the simplicity of a free-space laser-PCA feed which does not require painstaking laser realignment for each beam direction measure., This work was partly funded by the Ministerio de Economía y Competitividad under projects TEC2016-78028-C3-1-P, PID 2019-107885GB-C31 and MDM2016-0600, and Catalan Research Group 2017 SGR 219., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Efficient analysis of thick curved metal sheets

  • Úbeda Farré, Eduard
  • Rius Casals, Juan Manuel
The scattering analysis of perfectly conducting plates with the method-of-moment discretization of the Electric-Field Integral Equation has been traditionally carried out according to the thin-sheet approximation, which neglects the current contributions over the plate rims. The plate is then modelled as an open surface and handles a restricted number of unknowns as compared with the canonical modelling as a closed object. The thin-sheet approximation, although used in many practical applications, becomes inaccurate for thick enough plates or plates under plane wave incidence at grazing angles. Recently, a thick-plate approach has been presented to address the time-efficient and accurate scattering analysis of thick plates. This scheme exploits the symmetry properties of fields and currents thereby giving rise to two uncoupled problems with roughly half the number of unknowns of the original problem. In this paper, we extend this thick-plate scheme to the efficient scattering analysis of thick curved sheets., This work was supported by FEDER and the "Spanish Plan Estatal de Investigación Científica y Técnica y de Innovación", under projects: TEC2017-84817-C2-2-R/ AEI/10.13039/501100011033, TEC2016-78028-C3-1-P/AEI/10.13039/501100011033, PID2019-107885GB-C31/AEI/10.13039/501100011033 and the Unidad de Excelencia Maria de Maeztu MDM-2016-0600/AEI/10.13039/501100011033, which is financed by the Agencia Estatal de Investigación, Spain, and Catalan Research Group 2017 SGR 219., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Study on beamforming V2I scenarios for sub-6 GHz and mmWave channels

  • Ballesteros Sánchez, Christian
  • Ramírez Arroyave, Germán Augusto
  • Montero Bayo, Luca
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
The study of the wireless channel between a hybrid massive MIMO Base Station (BS) and a vehicular platform is proposed. Several multi-antenna geometries and MIMO architectures in both vehicle and BS are numerically modeled and compared. Different metrics are used for the assessment of the system performance, including channel capacity, in two frequency bands, sub-6 GHz (5.9 GHz) and millimeter-wave (mmWave) (26 GHz), under different propagation conditions. The use of beamforming techniques on the vehicle side is compared to conventional SISO and MIMO solutions. In the urban scenario used in the study, a 45° beamwidth circular array is able to enhance the single monopole performance up to 157% in capacity, and outperform MIMO 4×4 in most situations., This work was supported by the Spanish Comision Interministerial de Ciencia y Tecnología (CICYT) under projects TEC2016-78028-C3-1-P, MDM2016-0600, and Catalan Research Group 2017 SGR 219. The Spanish Ministry of Education contributes via a doctoral grant to the first author (FPU17/05561)., Peer Reviewed, Postprint (author's final draft)