Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Smart Beam Management for Vehicular Networks Using ML

  • Bharath-Reddy, G.
  • Montero, L.
  • Perez-Romero, J.
  • Molins-Benlliure, Jaime
  • Molina, J.
  • Romeu, J.
  • Jofre-R., L.
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] The mmWave frequencies will be widely used in future vehicular communications. At these frequencies, the radio channel becomes much more vulnerable to slight changes in the environment like motions of the device, reflections or blockage. In high mobility vehicular communications the rapidly changing vehicle environments and the large overheads due to frequent beam training are the critical disadvantages in developing these systems at mmWave frequencies. Hence, smart beam management procedures are desired to establish and maintain the radio channels. In this paper, we propose that using the positions and respective velocities of the vehicles in the dynamic selection of the beam pair, and then adapting to the changing environments using ML algorithms, can improve both network performance and communication stability in high mobility vehicular communications., This work was supported by the Spanish Comision Interministerial de Ciencia y Tecnologia (CICYT) under projects TEC2016-78028-C3-1-P and MDM2016-O6OO, Catalan Research Group 2017 SGR 21, and Industrial Doctorate programme (2018-DI-084) of Generalitat de Catalunya.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Vehicular mm-Wave Array for Smart Handover

  • Bharath Reddy, G.
  • Ramirez, G. A.
  • Molins-Benlliure, Jaime
  • Romeu, J.
  • Jofre-R., L.
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] The emergence of new technologies such as autonomous vehicles and high data rate 5G networks requires advanced antenna types that are capable of fulfilling requirements for highly demanding wireless communication links. The array of microstrip-fed slot-coupled patches is one such type of antenna that provides low return loss and good transient behaviour for broadband applications. A compact size slot-coupled patch antenna subarray and its phased array is proposed in this paper. Two different substrates Rogers TMM4 and Green TapeTM 951 Low Temperature Co-Fired Ceramic (LTCC) are considered for the fabrication of microstrip feedline. The feedline is fabricated on the respective substrates and then mounted on a Rogers RT/duroid 5880 laminate. Ground planes are used on both the front and backside of the antenna array. The antenna is operating in a range of 24.25 GHz - 29.5 GHz. A Smart Array is proposed in this paper which has a good performance in terms of antenna gain and scanning property for 5G application in Smart handovers., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects TEC2016-78028-C3-1- P, PID 2019-107885GB-C31, MDM2016-0600, and Catalan Research Group 2017 SGR 219.
Repositorio Digital UPCT
Publicación Artículo científico (JournalArticle)

Terahertz frequency-scaled differential imaging for Sub-6 GHz vehicular antenna signature analysis

  • Solano Pérez, José Antonio
  • Martínez Inglés, María Teresa
  • Molina García-Pardo, José María
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
  • Ballesteros Sánchez, Christian
  • Rodríguez Rodríguez, José Víctor
  • Mateo Aroca, Antonio
The next generation of connected and autonomous vehicles will be equipped with high numbers of antennas operating in a wide frequency range for communications and environment sensing. The study of 3D spatial angular responses and the radiation patterns modified by vehicular structure will allow for better integration of the associated communication and sensing antennas. The use of near-field monostatic focusing, applied with frequency-dimension scale translation and differential imaging, offers a novel imaging application. The objective of this paper is to theoretically and experimentally study the method of obtaining currents produced by an antenna radiating on top of a vehicular platform using differential imaging. The experimental part of the study focuses on measuring a scaled target using an imaging system operating in a terahertz band—from 220 to 330 GHz—that matches a 5G frequency band according to frequency-dimension scale translation. The results show that the induced currents are properly estimated using this methodology, and that the influence of the bandwidth is assessed., This research was funded by the Ministry of Education and Science, Spain (PID2019-107885GB-C33/AEI/10.13039/501100011033, TEC2016-78028-C3-1-P, TEC2016-78028-C3-2-P and TEC2016-78028-C3-3-P, MDM2016-O6OO), Catalan Research Group 2017 SGR 219, and the European FEDER funds.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Acceleration of Born series by change of variables

  • López Menchón, Héctor
  • Rius Casals, Juan Manuel
  • Heldring, Alexander
  • Úbeda Farré, Eduard
In this work, we propose a method to enhance the convergence of the Born series. The Born series is widely used in scattering theory, but its convergence is only guaranteed under certain restrictive conditions which limit the cases where this formulation can be applied. The proposed method, based on modifying the singularities of the resolvent operator by a change of variables, accelerates the convergence of the series or even achieves convergence in otherwise divergent cases. Due to its low computational cost and ease of implementation, the method preserves the advantages of the Born series while it extends its range of application. It can also be applied to a variety of methods relying on the same mathematical principles as the Born series. Numerical examples are provided to show that a significant improvement can be achieved with simple techniques and with a limited knowledge about the operator spectrum., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects TEC2016-78028-C3-1-P, MDM2016-0600, TEC2017-83343-C4-2-R, TEC2017-84817-C2-2-R, PID 2019-107885GB-C31 and Catalan Research Group 2017 SGR 219; and by Secretary of Universities and Research of the Ministry of Business and Knowledge of the Generalitat of Catalonia and European Social Fund under scholarship 2019 FI B00788., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Millimeter-wave MIMO array measurement system for imaging and channel characterization

  • Ballesteros Sánchez, Christian
  • Montero Bayo, Luca
  • Ramírez Arroyave, Germán Augusto
  • Dagatti, Mayco
  • Solano Pérez, José Antonio
  • Molina García-Pardo, José María
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
Millimeter-wave band offer unique characteristicsto obtain good spatial position and resolution of certain type oftargets. The aim of this paper is to study a near-field focusingtechnique applied to the imaging of different geometries, from ananalytical, numerical and experimental point of view. Millimeter-wave band scattering simulations are performed and comparedwith imaging reconstruction of experimental measurements,using a particular set-up and scenario. This work is a first stepto contribute to the growing need of sensing the environment andsurrounding objects of moving devices, such as new generationvehicles, in a clear and robust way with respect to other formsof sensing., This work was supported by the Spanish Ministry of Education and Science under projects 2019-107885GB-C31,TEC2016-78028-C3-1-P, TEC2016-78028-C3-2-P, TEC2016-78028-C3-3-P, MDM2016-0600, the Catalan Research Group 2017 SGR 219 and by the European FEDER funds. The Spanish Ministry of Education contributes via apredoctoral grant to the first author (FPU17/05561)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Optical beam steering network with multiband capability

  • Vega, Sara
  • Nuño Gómez, Daniel-Juan
  • Santos Blanco, M. Concepción
A multiwavelength (MW) optical true time delay Network (OTTDN) to feed a phased array antenna (PAA) is presented. Beam steering capabilities can be demonstrated when applying MW tuning. A Dual Electrode Mach Zehnder Modulator (DE-MZM) as radio frequency (RF) external modulating stage allows to tune the operative band avoiding severe Chromatic Dispersion (CD) fading to obtain a flattened response. A working example simulation of a 4 elements array at 8 GHz shows the RF multiband spectral flat response potential of the technique, as well as the network conditions needed for beam steering with free-lobe operation., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects TEC2016-78028-C3-1- P, PID 2019-107885GB-C31, MDM2016-0600, and Catalan Research Group 2017 SGR 219., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

On differential imaging using electromagnetic simulation for vehicular antenna signature analysis

  • Solano Pérez, José Antonio
  • Martinez Ingles, Maria Teresa
  • Molina García-Pardo, José María
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
  • Ballesteros Sánchez, Christian
  • Rodríguez Rodríguez, José Víctor
  • Mateo Aroca, Antonio
  • Guzmán Quirós, Raúl
The current trend in vehicles is to integrate a wide number of antennae and sensors operating at a variety of frequencies for sensing and communications. The integration of these antennae and sensors in the vehicle platform is complex because of the way in which the antenna radiation patterns interact with the vehicle structure and other antennae/sensors. Consequently, there is a need to study the radiation pattern of each antenna or, alternatively, the currents induced on the surface of the vehicle to optimize the integration of multiple antennae. The novel concept of differential imaging represents one method by which it is possible to obtain the surface current distribution without introducing any perturbing probe. The aim of this study was to develop and confirm the assumptions that underpin differential imaging by means of full-wave electromagnetic simulation, thereby providing additional verification of the concept. The simulation environment and parameters were selected to replicate the conditions in which real measurements were taken in previous studies. The simulations were performed using Ansys HFSS simulation software. The results confirm that the approximations are valid, and the differential currents are representative of the induced surface currents generated by a monopole positioned on the top of a vehicle., This research was funded by the Ministry of Education and Science, Spain (PID2019-107885GB-C33 / Agencia Estatal de Investigación AEI / 10.13039/501100011033), and the Catalan Research Group 2017 SGR 219., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Reconfigurable dual-polarized beam-steering broadband antenna using a crossed-strips geometry

  • Ramírez Arroyave, Germán Augusto
  • Zhou, Ivan
  • Blanch Boris, Sebastián
  • Towfiq, Asaduzzaman
  • Cetiner, Bedri Artug
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
In this letter, a reconfigurable dual-polarized broadband antenna with beam-steering capabilities using a parasitic layer is proposed for 5G new radio (NR) frequency range 1 (FR-1) applications. The antenna is a dual-port aperture-stacked patch structure with symmetrical orthogonal (horizontal and vertical) currents. The beam-steering is achieved by a pair of reconfigurable cross-shaped parasitic strips, which bestow the antenna three main beam directions θ = { ~ -25 ° ,0 ° , ~ 25 ° }, Ψ = {0 ° } with pointing and gain (7 dB) stability across a 30% impedance bandwidth (S 11 , S 22 <; -10 dB) from 3.2 - 4.3 GHz for both ports/polarizations. A prototype of the antenna is manufactured and measured demonstrating results in accordance with simulation expectations., This work was supported in part by Colombian “Departamento Administrativo de Ciencia, Tecnología e Innovación” Colciencias through convocatoria 727 of 2015 scholarship, and in part by the Spanish “Comision Interministerial de Ciencia y Tecnologia” (CICYT) under Projects TEC2013-47360-C3-1-P/AEI/10.13039/501100011033, TEC2016-78028-C3- 1-P/AEI/10.13039/501100011033, and MDM2016-0600, and Catalan Research Group 2017 SGR 219., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Antenna packaging for in-body applications

  • Romeu Robert, Jordi
  • González López, Giselle
  • Blanch Boris, Sebastián
  • Jofre Roca, Lluís
A cylindrical mode expansion of the fields produced by an embedded antenna is used to determine the dimensions of the antenna packaging in order to minimize antenna impedance changes when the antenna is immersed in a varying dielectric medium., This work was supported by the Spanish “Comision Interministerial de Ciencia y Tecnologia” (CICYT) under projects TEC2016-78028-C3-1P, MDM2016-O6OO, and Catalan Research Group 2017 SGR 219., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Characterization of THz radiation by collimated wavefront aperture raster scanning

  • Nuño Gómez, Daniel-Juan
  • Santos Blanco, M. Concepción
  • Gomez Diaz, J. Sebastian
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
We present measurements for characterization of the beam profile and polarization pattern of lens-coupled photoconductive antennas (PCAs) at THz frequencies using a setup with antennas at fixed positions and a movable aperture placed in between collimating THz lenses. The measured beam patterns for co-polar and cross-polar components reveal the expected Airy disc and quadrupole behavior, respectively. The temporal evolution of the polarization in the directions of maximum cross-polar component follows a single-cycle circle with opposite handedness at each side of the antennas line-of-sight (LOS). Results are consistent with those obtained with fiber-coupled movable antennas, while enjoying the simplicity of a free-space laser-PCA feed which does not require painstaking laser realignment for each beam direction measure., This work was partly funded by the Ministerio de Economía y Competitividad under projects TEC2016-78028-C3-1-P, PID 2019-107885GB-C31 and MDM2016-0600, and Catalan Research Group 2017 SGR 219., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Efficient analysis of thick curved metal sheets

  • Úbeda Farré, Eduard
  • Rius Casals, Juan Manuel
The scattering analysis of perfectly conducting plates with the method-of-moment discretization of the Electric-Field Integral Equation has been traditionally carried out according to the thin-sheet approximation, which neglects the current contributions over the plate rims. The plate is then modelled as an open surface and handles a restricted number of unknowns as compared with the canonical modelling as a closed object. The thin-sheet approximation, although used in many practical applications, becomes inaccurate for thick enough plates or plates under plane wave incidence at grazing angles. Recently, a thick-plate approach has been presented to address the time-efficient and accurate scattering analysis of thick plates. This scheme exploits the symmetry properties of fields and currents thereby giving rise to two uncoupled problems with roughly half the number of unknowns of the original problem. In this paper, we extend this thick-plate scheme to the efficient scattering analysis of thick curved sheets., This work was supported by FEDER and the "Spanish Plan Estatal de Investigación Científica y Técnica y de Innovación", under projects: TEC2017-84817-C2-2-R/ AEI/10.13039/501100011033, TEC2016-78028-C3-1-P/AEI/10.13039/501100011033, PID2019-107885GB-C31/AEI/10.13039/501100011033 and the Unidad de Excelencia Maria de Maeztu MDM-2016-0600/AEI/10.13039/501100011033, which is financed by the Agencia Estatal de Investigación, Spain, and Catalan Research Group 2017 SGR 219., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Improving the accuracy of the adaptive cross approximation with a convergence criterion based on random sampling

  • Heldring, Alexander
  • Úbeda Farré, Eduard
  • Rius Casals, Juan Manuel
The accuracy of the Adaptive Cross Approximation (ACA) algorithm, a popular method for the compression of low rank matrix blocks in Method of Moment computations, is sometimes seriously compromised by unpredictable errors in the convergence criterion. This paper proposes an alternative criterion, based on global sampling of the error in the elements of the ACA compressed matrix. The sampling error depends on the size of the sample but also on the population distribution of the error, which makes it difficult to control the error independently of the underlying problem. However, as argued and demonstrated in the paper, the distribution of the error converges to the same unique probability distribution function for all low rank matrices. Complementing the sampling criterion with a simple mechanism to detect this convergence, we arrive at a criterion that controls the error irrespective of the underlying problem. As a practical example the RCS of a moderate size metallic ogive is computed to illustrate the merits of the proposed criterion. The proposed algorithm may also be useful in other methods that approximate low-rank matrices by interpolation of a reduced set of its elements., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects TEC2016-78028-C3-1-P, TEC2017-84817-C2-2-R, TEC2017-83343-C4-2-R, PID 2019-107885GBC31, MDM2016-0600, and Catalan Research Group 2017 SGR 219., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Technology assessment of aperture coupled slot antenna array in Groove Gapwaveguide for 5G millimeter wave applications

  • Zhou, Ivan
  • Jofre Roca, Lluís
  • Romeu Robert, Jordi
A compact triple-layer series fed slot unit array using Groove Gap Waveguide (GGW) technology for 5G millimeter-wave applications is presented in this paper. The design employed a two-step coupling mechanism for the radiating slots. The aperture coupling design when combined with the groove gapWaveguide (GGW) technology allows achieving three different goals: First, a reduction of the array size in the transversal direction, so more unit arrays can be added without grating lobes. Secondly, low insertion losses with high radiation efficiency. And third, a reduction of the manufacturing complexity with good stability against fabrication tolerances of up to 0.1 mm, making the design feasible to be massively deployed. The antenna was fabricated and measured showing good agreement with the numerical simulation results, the antenna provides a peak realized gain of 12.15dB at the central frequency of operation and a fractional bandwidth (FBW) of 9%., This work was supported in part by the Agencia Estatal Investigación under Grant PID2019-107885GB-C31/AEI/10.13039; and in part by the Catalan Research Group under Grant 2017SGR219, Grant MDM2016-O6OO, and Grant DI2020-043., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Nested fast adaptive cross approximation algorithm for solving electromagnetic scattering problems

  • Fang, Xiaoxing
  • Heldring, Alexander
  • Rius Casals, Juan Manuel
  • Chen, Xinlei
  • Cao, Qunsheng
In this paper, a Nested Fast Adaptive Cross Approximation (NFACA) algorithm is presented to accelerate the solution of electromagnetic scattering problems. It is based on the Fast Adaptive Cross Approximation (FACA) and the Nested Cross Approximation (NCA). In the NFACA, the FACA is applied instead of the ACA or the Chebyshev nodes, to enhance the efficiency. It is shown to have O(N) storage and computational complexity for electrically small problems. Different from the conventional NCA or the Fast Nested Cross Approximation (FNCA), the pivot-selection does not rely on a preliminary selection with Chebyshev nodes or ACA for each group. The NFACA permits the selection of the optimum pivots independently at each level to make the accuracy controllable. Numerical results of several objects are presented to demonstrate the performance of this method. Compared with the FACA and NCA in solving the electromagnetic scattering problems, the NFACA is more efficient both in computational cost and storage. Compared with the FNCA, the NFACA is both faster and more accurate., This work was supported in part by the National Nature Science Foundation of China under Grant 61871219, Grant 61771238, and Grant 61501227; in part by the Post-Graduate Research and Practice Innovation Program of Jiangsu Province under Grant KYCX18_0289; in part by the China Scholarship Council under Grant 201906830042; in part by the Spanish Ministerio de Ciencia e Innovacion (MICINN) under Project TEC2016-78028-C3-1-P, Project PID 2019-107885GB-C31, Project TEC2017-83343-C4-2-R, and Project MDM2016-0600; and in part by the Catalan Research Group 2017 SGR 219., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Study on beamforming V2I scenarios for sub-6 GHz and mmWave channels

  • Ballesteros Sánchez, Christian
  • Ramírez Arroyave, Germán Augusto
  • Montero Bayo, Luca
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
The study of the wireless channel between a hybrid massive MIMO Base Station (BS) and a vehicular platform is proposed. Several multi-antenna geometries and MIMO architectures in both vehicle and BS are numerically modeled and compared. Different metrics are used for the assessment of the system performance, including channel capacity, in two frequency bands, sub-6 GHz (5.9 GHz) and millimeter-wave (mmWave) (26 GHz), under different propagation conditions. The use of beamforming techniques on the vehicle side is compared to conventional SISO and MIMO solutions. In the urban scenario used in the study, a 45° beamwidth circular array is able to enhance the single monopole performance up to 157% in capacity, and outperform MIMO 4×4 in most situations., This work was supported by the Spanish Comision Interministerial de Ciencia y Tecnología (CICYT) under projects TEC2016-78028-C3-1-P, MDM2016-0600, and Catalan Research Group 2017 SGR 219. The Spanish Ministry of Education contributes via a doctoral grant to the first author (FPU17/05561)., Peer Reviewed, Postprint (author's final draft)