Pasar al contenido principal

EVALUACION DE LA CAPACIDAD RESISTENTE FRENTE A ESFUERZOS TANGENTES DE ESTRUCTURAS DE HORMIGON MEDIANTE MODELOS MECANICOS PARA LA EXTENSION DE SU VIDA UTIL

BIA2015-64672-C4-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Ensayos a cortante y punzonamiento sobre un puente antiguo de hormigón armado sobre el rio Anoia en Gelida, Punching and shear tests on an old reinforced concrete bridge over the Anoia river in Gelida

  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
  • Fernández Sánchez, Pablo Gonzalo|||0000-0002-8237-860X
  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Aceña Ramos, Valentín
  • García Vicente, Tomàs
  • Duarte Gómez, Noemí|||0000-0002-4542-8487
Se presentan los estudios llevados a cabo sobre el tablero de un puente de hormigón armado, construido en 1929 en Gelida (Barcelona) sobre el río Anoia, formado por 11 vanos isostáticos de 10,5 m de luz, con vigas sección en ¿, armadas con barras lisas levantadas y cercos. Se han realizado ensayos de cortante sobre vigas en T y de punzonamiento en la losa superior, así como predicciones teóricas de los resultados experimentales. La estructura ha mostrado gran resistencia frente a solicitaciones tangentes y gran rigidez, pese a la heterogeneidad del hormigón, del uso de barras lisas y de la presencia de corrosión local, satisfaciendo los requisitos de seguridad y aptitud al servicio establecidos en las normativas actuales., Este trabajo se ha desarrollado en el contexto del proyecto BIA2015-64672-C4-1-R, financiado por el Ministerio de Economía y Competitividad de España. La Diputación de Barcelona, ha facilitado las vigas ensayadas, así como su corte, manipulación en obra y transporte al laboratorio. El equipo de la UPC agradece enormemente la colaboración de la ingeniera de la Diputación de Barcelona, Maria Josep Palau, de los ingenieros de la empresa constructora Pasquina y de la Dirección de Obra, Sergi Font y José Escudero, entre otros, por su inmensa ayuda, así como a los técnicos del Laboratorio de Tecnología de Estructuras y Materiales de la UPC, Carlos Hurtado, Jordi Cabrerizo y Robert McAloon, por su dedicación y entrega. Finalmente, se agradece a los estudiantes Felipe Baba, Alberto Sarmiento y Raúl Salinas quienes han desarrollado su tesis de Máster en el contexto de este proyecto.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Simplified tests to study the size effect of the compression chord in beams under shear forces: application of DIC methodology, Ensayos en probetas para el estudio del efecto tamaño en la cabeza de compresión de vigas sometidas a esfuerzo cortante: aplicación de la metodología DIC

  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Barris Peña, Cristina
  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
  • Torres Llinàs, Lluís
  • Santander, Andres
To evaluate how the size effect affects the stresses developed along the compression chord in a beams subjected to shear forces, a simplified experimental program was developed on 50 prismatic specimens subjected to a splitting test. The studied parameters were: dimensions, slenderness, concrete compressive strength, and maximum aggregate size. To capture the post-peak behavior of the concrete, the load was introduced as a function of the crack width, through appropriate control algorithms. Digital Image Correlation (DIC) in a 2D configuration has also been used to accurately capture the formation, width and propagation of cracks to corroborate the experimental measurements., The financial support provided by the Spanish Ministry of Economy and Competitiveness (MINECO) and the European Funds for Regional Development (FEDER), through the Research projects: BIA2015-64672-C4-1-R and BIA2017-84975-C2-2-P and through the Excellence network BIA2015-71484-REDT.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Evaluación del tiempo de recuperación de edificios de concreto reforzado dañados por sismo

  • Gutiérrez, Juan Jesús
  • Ayala, A. Gustavo
  • Bairán García, Jesús Miguel|||0000-0003-2831-1479
Sismos recientes han demostrado la importancia de evaluar el tiempo que tardarían los edificios dañados en ser reparados, ocupables y funcionales nuevamente, debido a que el tiempo de inactividad puede generar pérdidas económicas e implicaciones sociales importantes. En este trabajo se presenta una metodología para evaluar el tiempo de recuperación en términos probabilistas de edificios que han sido dañados por sismo. El esquema de evaluación propuesto se basa en el método PERT y es consistente con el esquema de evaluación sísmica propuesto por el PEER y con el concepto de resiliencia desarrollado por el MCEER. Se presenta la evaluación de un edificio de concreto reforzado en el que se incluyen los muros de mampostería no reforzada. Recent earthquakes have demonstrated the importance of assessing the time it would take for damaged buildings to be repaired, occupied and functional again, because downtime can lead to significant economic losses and social implications. This paper presents a methodology to evaluate the recovery time in probabilistic terms of buildings that have been damaged by earthquakes. The proposed evaluation scheme is based on the PERT method and is consistent with the seismic evaluation scheme proposed by PEER and with the concept of resilience developed by the MCEER. The evaluation of a reinforced concrete building is presented, in which the infill unreinforced masonry walls are included.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Effects of tensile stresses on punching shear strength of RC slabs

  • Fernández Sánchez, Pablo Gonzalo|||0000-0002-8237-860X
  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Domingo Tarancón, Magí|||0000-0002-5403-5204
RC slabs can be subjected to transverse loads and tensile in-plane forces, as it occurs in top slabs of continuous bridges under negative moments. Tensile forces can reduce the shear or punching capacity of the slab, aspect not yet studied. A theoretical and experimental investigation has been carried out, in which 10 slabs have been tested under a point load and different degrees of tensile force. The results of five axisymmetrically supported slabs of 1.65x1.65x0.12m are presented. Numerical predictions were made with FEA software ABAQUS and, in addition, the Compression Chord Capacity Mechanical Model CCCM, was extended to account for the effect of in-plane tensile forces. The experimental results showed that the ultimate punching load diminished linearly with the applied tensile force applied and that, after yielding of longitudinal reinforcement such reduction was higher., Los autores desean agradecer la financiación recibida del Ministerio de Ciencia e Innovación y de los Fondos Europeos de Desarrollo Regional (FEDER) a través del proyecto “Evaluación de la capacidad resistente frente a esfuerzos tangentes de estructuras de hormigón mediante modelos mecánicos para la extensión de su vida útil” BIA2015-64672-C4-1-R . Así mismo desean agradecer el apoyo del Laboratorio de Tecnologia de Estructuras y Materiales de la UPC y de todos los técnicos que han contribuido a la realización de esta campaña experimental y sin cuya ayuda no habría sido posible.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Crack detection in concrete elements from RGB pictures using modified line detection kernels

  • Sánchez Calderón, Luis
  • Bairán García, Jesús Miguel|||0000-0003-2831-1479
Cracking is inevitable in ordinary reinforced concrete construction, yet it should be controlled to guarantee adequate serviceability and durability. Crack patterns analysis is essential for diagnosis, monitoring and maintenance, to identify malfunctioning or unsafe situations. An important part of this state is the cracking pattern of the elements as an indicator of the tensional distribution in the concrete. A method to search and measure fissures in RGB images of concrete elements has been developed and implemented as a MATLAB script. The algorithm uses several digital image processing tools to detect the measure, the cracks width and orientation; featuring these tools are the spatial filters called “orientation kernels” developed especially for detecting the angle and width of the cracks.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Application of the Compression Chord Capacity Model to predict the fatigue shear strength of reinforced concrete members without stirrups

  • Cladera Bohigas, Antoni
  • Ribas González, Carlos Rodrigo
  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
The Compression Chord Capacity Model (CCCM), previously developed by the authors with other colleagues, is a simplified model for the shear strength prediction of reinforced and prestressed concrete members with and without transverse reinforcement, with I, T or rectangular cross-section, which represents a useful tool for structural design and assessment in engineering practice. The principal advantage of the application of a mechanical model is the possibility to extend it to different cases, without the need of empirical calibrations. According to the CCCM, the shear strength depends on the concrete tensile strength. In this communication, the CCCM is extended to assess the fatigue shear strength of RC members just incorporating the equation proposed in Model Code 2010 for the concrete tensile fatigue strength. A good performance of the model was observed when analysing the ratio Vtest/Vpred through a previously published database, showing a low scatter (COV 14.7 %)., Esta investigación se ha desarrollado en el marco de dos proyectos cofinanciados por la Agencia Estatal de Investigación y Fondos FEDER: BIA2015-64672-C4-3-R y BIA2015-64672-C4-1-R.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Performance-based slenderness limits for deflections and reinforcement stresses control in RC beams, Límites de esbeltez basados en prestaciones para vigas de hormigón armado para el control de deformaciones y el control de tensiones en la armadura

  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
  • Torres Llinàs, Lluís
  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Barris Peña, Cristina
Due to the complex deformational behavior of cracked RC members, an effective way to ensure the fulfilment of the SLS is to limit the slenderness ratio l/d of the element. In this study, the deformation slenderness limit concept is generalized to incorporate crack width limitations. The proposed slenderness limits are compared with those derived from non-linear time-dependent analysis and also with those obtained using the EC2 method of deflections interpolation. Very good approximation and low scatter has been obtained showing that the proposed slenderness limits are a useful tool for performance-based design of RC structures., The financial support provided by the Spanish Ministry of Economy and Competitiveness (MINECO) and the European Funds for Regional Development (FEDER), through the Research projects: BIA2015-64672-C4-1-R and BIA2017-84975-C2-2-P and through the Excellence network BIA2015-71484-REDT
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Resistencia a punzonamiento de losas de hormigón armado sometidas a tracciones en su plano, Punching strength of reinforced concrete slabs subjected to in-plane tensile forces

  • Fernández Sánchez, Pablo Gonzalo|||0000-0002-8237-860X
  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Duarte Gómez, Noemí|||0000-0002-4542-8487
Se presentan los resultados de un estudio teórico y experimental de la resistencia a punzonamiento de placas sometidas a tracciones en su plano. Se han ensayado 10 losas de 1,65 x 1,65 x 0,12 metros, con dos cuantías diferentes de armadura, apoyadas en ocho puntos, sometidas a diversos niveles de tracción. Se observó que la carga última disminuye linealmente con la tracción aplicada, si bien, a partir de la plastificación de la armadura de flexión longitudinal, esta reducción es mayor. Las predicciones mediante modelos numéricos y mediante el modelo mecánico CCCM de resistencia a punzonamiento proporcionaron una excelente concordancia con los resultados experimentales., Los autores desean agradecer la financiación recibida del Ministerio de Ciencia e Innovación y de los Fondos Europeos de Desarrollo Regional (FEDER) a través del proyecto “Evaluación de la capacidad resistente frente a esfuerzos tangentes de estructuras de hormigón mediante modelos mecánicos para la extensión de su vida útil” BIA2015-64672-C4-1-R . Así mismo desean agradecer el apoyo del director del Laboratorio de Tecnología de Estructuras y Materiales de la UPC, de los técnicos y de los estudiantes de Master Magí Domingo y Laura Beltrán, quienes han contribuido a la realización de esta campaña experimental.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Effects of unidirectional tensile stresses on punching shear strength of RC slabs

  • Fernández Sánchez, Pablo Gonzalo|||0000-0002-8237-860X
  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Domingo Tarancón, Magí|||0000-0002-5403-5204
RC slabs can be subjected to transverse loads and in-plane tensile forces simultaneously, as it occurs in top slabs of continuous box girder bridges at intermediate supports, or in floor slabs supported on columns and subjected to horizontal forces, due to skew in-plane compressions. Tensile forces can reduce the punching capacity of the slabs, aspect not studied yet. An experi-mental, numerical and theoretical investigation has been carried out, in which 5 1.65x1.65x0.12 m slabs have been tested under a point load and different degrees of unidirectional tensile force. Numerical predictions were made with FEA software ABAQUS and, from the theoretical point of view, the Compression Chord Capacity Model (CCCM) was extended to take into account the effect of in-plane tensile forces in the punching strength of the slabs. The experimental results showed that the ultimate punching load decreases linearly with the applied tensile force, and if that tensile force cracks the slabs, such reduction is higher. Results obtained with FEA and CCCM are in agreement with the observations made at the laboratory, This work has been carried out within the framework of research project BIA-2015-64672-C4-1-R, financed by the Ministry of Economy and Competitiveness (MINECO) of Spain. The authors want o deeply thank the personnel of the Structural Technology Laboratory of the Polytechnic University of Catalonia and Master student Laura Beltrán who collaborated in the execution of the tests.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Mechanical model for the shear strength of steel fibers reinforced concrete beams (SFRC) without stirrups, Modelo mecánico para la resistencia a cortante de vigas de hormigón armado reforzado con fibras, sin armadura de cortante

  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
  • Spinella, Nino
  • Recupero, Antonino
  • Cladera Bohigas, Antoni
Despite the numerous studies made showing that the addition of steel fibres to concrete enhances the shear strength of RC beams, current design formulations are still empirical and present large scatter in front of the test results. In this paper, the previously developed Multi-Action Shear Model is extended to SFRC beams without stirrups, adopting an analytical formulation to evaluate the residual tensile stress of SFRC and incorporating the effects of the crack bridging capacity of SFRC in the shear resisted trough the different shear-transfer mechanisms. The proposed model predicts the tests results included in a recently published database with 448 shear tests with less scatter than any of the existing models., The financial support provided by the University of Messina (Italy), through the scholarship granted for a two-months research and teaching stage of the first author, is acknowledged. This work is part of the Research Projects BIA2015-64672-C4-1-R, funded by the Spanish Ministry of Economy and competitiveness, and RTI2018-097314-B-C21, funded by the Spanish Ministry of Science and Innovation.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Crack detection in concrete elements from RGB pictures using modified line detection kernels

  • Sánchez Calderón, Luis
  • Bairán García, Jesús Miguel
Cracking is inevitable in ordinary reinforced concrete construction, yet it should be controlled to guarantee adequate serviceability and durability. Crack patterns analysis is essential for diagnosis, monitoring and maintenance, to identify malfunctioning or unsafe situations. An important part of this state is the cracking pattern of the elements as an indicator of the tensional distribution in the concrete. A method to search and measure fissures in RGB images of concrete elements has been developed and implemented as a MATLAB script. The algorithm uses several digital image processing tools to detect the measure, the cracks width and orientation; featuring these tools are the spatial filters called “orientation kernels” developed especially for detecting the angle and width of the cracks., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Effects of unidirectional tensile stresses on punching shear strength of RC slabs

  • Fernández Sánchez, Pablo Gonzalo
  • Marí Bernat, Antonio Ricardo
  • Oller Ibars, Eva
  • Domingo Tarancón, Magí
RC slabs can be subjected to transverse loads and in-plane tensile forces simultaneously, as it occurs in top slabs of continuous box girder bridges at intermediate supports, or in floor slabs supported on columns and subjected to horizontal forces, due to skew in-plane compressions. Tensile forces can reduce the punching capacity of the slabs, aspect not studied yet. An experi-mental, numerical and theoretical investigation has been carried out, in which 5 1.65x1.65x0.12 m slabs have been tested under a point load and different degrees of unidirectional tensile force. Numerical predictions were made with FEA software ABAQUS and, from the theoretical point of view, the Compression Chord Capacity Model (CCCM) was extended to take into account the effect of in-plane tensile forces in the punching strength of the slabs. The experimental results showed that the ultimate punching load decreases linearly with the applied tensile force, and if that tensile force cracks the slabs, such reduction is higher. Results obtained with FEA and CCCM are in agreement with the observations made at the laboratory, This work has been carried out within the framework of research project BIA-2015-64672-C4-1-R, financed by the Ministry of Economy and Competitiveness (MINECO) of Spain. The authors want o deeply thank the personnel of the Structural Technology Laboratory of the Polytechnic University of Catalonia and Master student Laura Beltrán who collaborated in the execution of the tests., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Simplified tests to study the size effect of the compression chord in beams under shear forces: application of DIC methodology, Ensayos en probetas para el estudio del efecto tamaño en la cabeza de compresión de vigas sometidas a esfuerzo cortante: aplicación de la metodología DIC

  • Oller Ibars, Eva
  • Barris Peña, Cristina
  • Marí Bernat, Antonio Ricardo
  • Torres Llinàs, Lluís
  • Santander, Andres
To evaluate how the size effect affects the stresses developed along the compression chord in a beams subjected to shear forces, a simplified experimental program was developed on 50 prismatic specimens subjected to a splitting test. The studied parameters were: dimensions, slenderness, concrete compressive strength, and maximum aggregate size. To capture the post-peak behavior of the concrete, the load was introduced as a function of the crack width, through appropriate control algorithms. Digital Image Correlation (DIC) in a 2D configuration has also been used to accurately capture the formation, width and propagation of cracks to corroborate the experimental measurements., The financial support provided by the Spanish Ministry of Economy and Competitiveness (MINECO) and the European Funds for Regional Development (FEDER), through the Research projects: BIA2015-64672-C4-1-R and BIA2017-84975-C2-2-P and through the Excellence network BIA2015-71484-REDT., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Performance-based slenderness limits for deflections and reinforcement stresses control in RC beams, Límites de esbeltez basados en prestaciones para vigas de hormigón armado para el control de deformaciones y el control de tensiones en la armadura

  • Marí Bernat, Antonio Ricardo
  • Torres Llinàs, Lluís
  • Oller Ibars, Eva
  • Barris Peña, Cristina
Due to the complex deformational behavior of cracked RC members, an effective way to ensure the fulfilment of the SLS is to limit the slenderness ratio l/d of the element. In this study, the deformation slenderness limit concept is generalized to incorporate crack width limitations. The proposed slenderness limits are compared with those derived from non-linear time-dependent analysis and also with those obtained using the EC2 method of deflections interpolation. Very good approximation and low scatter has been obtained showing that the proposed slenderness limits are a useful tool for performance-based design of RC structures., The financial support provided by the Spanish Ministry of Economy and Competitiveness (MINECO) and the European Funds for Regional Development (FEDER), through the Research projects: BIA2015-64672-C4-1-R and BIA2017-84975-C2-2-P and through the Excellence network BIA2015-71484-REDT, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Effects of tensile stresses on punching shear strength of RC slabs

  • Fernández Sánchez, Pablo Gonzalo
  • Marí Bernat, Antonio Ricardo
  • Oller Ibars, Eva
  • Domingo Tarancón, Magí
RC slabs can be subjected to transverse loads and tensile in-plane forces, as it occurs in top slabs of continuous bridges under negative moments. Tensile forces can reduce the shear or punching capacity of the slab, aspect not yet studied. A theoretical and experimental investigation has been carried out, in which 10 slabs have been tested under a point load and different degrees of tensile force. The results of five axisymmetrically supported slabs of 1.65x1.65x0.12m are presented. Numerical predictions were made with FEA software ABAQUS and, in addition, the Compression Chord Capacity Mechanical Model CCCM, was extended to account for the effect of in-plane tensile forces. The experimental results showed that the ultimate punching load diminished linearly with the applied tensile force applied and that, after yielding of longitudinal reinforcement such reduction was higher., Los autores desean agradecer la financiación recibida del Ministerio de Ciencia e Innovación y de los Fondos Europeos de Desarrollo Regional (FEDER) a través del proyecto “Evaluación de la capacidad resistente frente a esfuerzos tangentes de estructuras de hormigón mediante modelos mecánicos para la extensión de su vida útil” BIA2015-64672-C4-1-R . Así mismo desean agradecer el apoyo del Laboratorio de Tecnologia de Estructuras y Materiales de la UPC y de todos los técnicos que han contribuido a la realización de esta campaña experimental y sin cuya ayuda no habría sido posible., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Ensayos a cortante y punzonamiento sobre un puente antiguo de hormigón armado sobre el rio Anoia en Gelida, Punching and shear tests on an old reinforced concrete bridge over the Anoia river in Gelida

  • Marí Bernat, Antonio Ricardo
  • Fernández Sánchez, Pablo Gonzalo
  • Oller Ibars, Eva
  • Aceña Ramos, Valentín
  • García Vicente, Tomàs
  • Duarte Gómez, Noemí
Se presentan los estudios llevados a cabo sobre el tablero de un puente de hormigón armado, construido en 1929 en Gelida (Barcelona) sobre el río Anoia, formado por 11 vanos isostáticos de 10,5 m de luz, con vigas sección en ¿, armadas con barras lisas levantadas y cercos. Se han realizado ensayos de cortante sobre vigas en T y de punzonamiento en la losa superior, así como predicciones teóricas de los resultados experimentales. La estructura ha mostrado gran resistencia frente a solicitaciones tangentes y gran rigidez, pese a la heterogeneidad del hormigón, del uso de barras lisas y de la presencia de corrosión local, satisfaciendo los requisitos de seguridad y aptitud al servicio establecidos en las normativas actuales., Este trabajo se ha desarrollado en el contexto del proyecto BIA2015-64672-C4-1-R, financiado por el Ministerio de Economía y Competitividad de España. La Diputación de Barcelona, ha facilitado las vigas ensayadas, así como su corte, manipulación en obra y transporte al laboratorio. El equipo de la UPC agradece enormemente la colaboración de la ingeniera de la Diputación de Barcelona, Maria Josep Palau, de los ingenieros de la empresa constructora Pasquina y de la Dirección de Obra, Sergi Font y José Escudero, entre otros, por su inmensa ayuda, así como a los técnicos del Laboratorio de Tecnología de Estructuras y Materiales de la UPC, Carlos Hurtado, Jordi Cabrerizo y Robert McAloon, por su dedicación y entrega. Finalmente, se agradece a los estudiantes Felipe Baba, Alberto Sarmiento y Raúl Salinas quienes han desarrollado su tesis de Máster en el contexto de este proyecto., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Application of the Compression Chord Capacity Model to predict the fatigue shear strength of reinforced concrete members without stirrups

  • Cladera Bohigas, Antoni
  • Ribas González, Carlos Rodrigo
  • Oller Ibars, Eva
  • Marí Bernat, Antonio Ricardo
The Compression Chord Capacity Model (CCCM), previously developed by the authors with other colleagues, is a simplified model for the shear strength prediction of reinforced and prestressed concrete members with and without transverse reinforcement, with I, T or rectangular cross-section, which represents a useful tool for structural design and assessment in engineering practice. The principal advantage of the application of a mechanical model is the possibility to extend it to different cases, without the need of empirical calibrations. According to the CCCM, the shear strength depends on the concrete tensile strength. In this communication, the CCCM is extended to assess the fatigue shear strength of RC members just incorporating the equation proposed in Model Code 2010 for the concrete tensile fatigue strength. A good performance of the model was observed when analysing the ratio Vtest/Vpred through a previously published database, showing a low scatter (COV 14.7 %)., Esta investigación se ha desarrollado en el marco de dos proyectos cofinanciados por la Agencia Estatal de Investigación y Fondos FEDER: BIA2015-64672-C4-3-R y BIA2015-64672-C4-1-R., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Evaluación del tiempo de recuperación de edificios de concreto reforzado dañados por sismo

  • Gutiérrez, Juan Jesús
  • Ayala, A. Gustavo
  • Bairán García, Jesús Miguel
Sismos recientes han demostrado la importancia de evaluar el tiempo que tardarían los edificios dañados en ser reparados, ocupables y funcionales nuevamente, debido a que el tiempo de inactividad puede generar pérdidas económicas e implicaciones sociales importantes. En este trabajo se presenta una metodología para evaluar el tiempo de recuperación en términos probabilistas de edificios que han sido dañados por sismo. El esquema de evaluación propuesto se basa en el método PERT y es consistente con el esquema de evaluación sísmica propuesto por el PEER y con el concepto de resiliencia desarrollado por el MCEER. Se presenta la evaluación de un edificio de concreto reforzado en el que se incluyen los muros de mampostería no reforzada. Recent earthquakes have demonstrated the importance of assessing the time it would take for damaged buildings to be repaired, occupied and functional again, because downtime can lead to significant economic losses and social implications. This paper presents a methodology to evaluate the recovery time in probabilistic terms of buildings that have been damaged by earthquakes. The proposed evaluation scheme is based on the PERT method and is consistent with the seismic evaluation scheme proposed by PEER and with the concept of resilience developed by the MCEER. The evaluation of a reinforced concrete building is presented, in which the infill unreinforced masonry walls are included., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Mechanical model for the shear strength of steel fibers reinforced concrete beams (SFRC) without stirrups, Modelo mecánico para la resistencia a cortante de vigas de hormigón armado reforzado con fibras, sin armadura de cortante

  • Marí Bernat, Antonio Ricardo
  • Spinella, Nino
  • Recupero, Antonino
  • Cladera Bohigas, Antoni
Despite the numerous studies made showing that the addition of steel fibres to concrete enhances the shear strength of RC beams, current design formulations are still empirical and present large scatter in front of the test results. In this paper, the previously developed Multi-Action Shear Model is extended to SFRC beams without stirrups, adopting an analytical formulation to evaluate the residual tensile stress of SFRC and incorporating the effects of the crack bridging capacity of SFRC in the shear resisted trough the different shear-transfer mechanisms. The proposed model predicts the tests results included in a recently published database with 448 shear tests with less scatter than any of the existing models., The financial support provided by the University of Messina (Italy), through the scholarship granted for a two-months research and teaching stage of the first author, is acknowledged. This work is part of the Research Projects BIA2015-64672-C4-1-R, funded by the Spanish Ministry of Economy and competitiveness, and RTI2018-097314-B-C21, funded by the Spanish Ministry of Science and Innovation., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Resistencia a punzonamiento de losas de hormigón armado sometidas a tracciones en su plano, Punching strength of reinforced concrete slabs subjected to in-plane tensile forces

  • Fernández Sánchez, Pablo Gonzalo
  • Marí Bernat, Antonio Ricardo
  • Oller Ibars, Eva
  • Duarte Gómez, Noemí
Se presentan los resultados de un estudio teórico y experimental de la resistencia a punzonamiento de placas sometidas a tracciones en su plano. Se han ensayado 10 losas de 1,65 x 1,65 x 0,12 metros, con dos cuantías diferentes de armadura, apoyadas en ocho puntos, sometidas a diversos niveles de tracción. Se observó que la carga última disminuye linealmente con la tracción aplicada, si bien, a partir de la plastificación de la armadura de flexión longitudinal, esta reducción es mayor. Las predicciones mediante modelos numéricos y mediante el modelo mecánico CCCM de resistencia a punzonamiento proporcionaron una excelente concordancia con los resultados experimentales., Los autores desean agradecer la financiación recibida del Ministerio de Ciencia e Innovación y de los Fondos Europeos de Desarrollo Regional (FEDER) a través del proyecto “Evaluación de la capacidad resistente frente a esfuerzos tangentes de estructuras de hormigón mediante modelos mecánicos para la extensión de su vida útil” BIA2015-64672-C4-1-R . Así mismo desean agradecer el apoyo del director del Laboratorio de Tecnología de Estructuras y Materiales de la UPC, de los técnicos y de los estudiantes de Master Magí Domingo y Laura Beltrán, quienes han contribuido a la realización de esta campaña experimental., Postprint (published version)