Pasar al contenido principal

ESTRUCTURAS DE HORMIGON DE ALTAS PRESTACIONES UTILIZANDO MATERIALES Y TECNOLOGIAS AVANZADOS DE DISEÑO Y CONSTRUCCION

RTI2018-097314-B-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 35
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Life-cycle cost of CFRP and steel prestressed concrete elements

  • Bairán García, Jesús Miguel|||0000-0003-2831-1479
  • Murcia Delso, Juan|||0000-0001-6424-7262
  • Duarte Gómez, Noemí|||0000-0002-4542-8487
  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
Carbon steel reinforcement is vulnerable to corrosion, degrading the structure with time, and has large economic implications for aging infrastructures. CFRP is an alternative in reinforced and prestressed concrete, not prone to corrosion. However, its cost is considerably larger than steel, and its mechanical properties enforce different design criteria. Therefore, it is not evident when CFRP is a convenient solution. In this paper, benefits of CFRP reinforcement are investigated in LCC context. An archetype prestressed-concrete bridge is designed with the two types of reinforcement. Two environment scenarios are analyzed, representative of current and increased chloride concentration in coastal regions. The costs investigated include routine inspections, major repairs and users’ affectation. Although requiring less maintenance cost, the design with CFRP has a higher LCC that the steel-reinforced alternative, in the current chloride scenario close to the coast. However, in scenarios of larger chloride exposure, the CFRP solution may be more competitive., This study was developed in the scope of research projects PID2021-123701OB-C21, funded by MCIN/ AEI/10.13039/501100011033 and European Regional Development Funds (ERDF) “A way to make Europe”, and TED2021-130272B-C21 funded by MCIN/ AEI/10.13039/501100011033 “European Union NextGenerationEU/PRTR”.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Efficiency of shear strengthening of RC beams with externally bonded FRP materials: state-of-the-art in the experimental tests

  • Kotynia, Renata
  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Kaszubska, Monika
  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
This paper presents a study of the shear capacity of reinforced concrete (RC) beams strengthened in shear with externally bonded (EB) fiber reinforced polymer (FRP) composites, based on the performance of existing published tests. The main objective of this study is to create a comprehensive overview of the performance of different shear strengthening configurations and the failure modes observed in experimental tests. In addition, the influence of the following parameters on the strengthening efficiency has been analyzed: shear span to depth ratio (a/d), existing steel transverse reinforcement ratio (ρsw), concrete strength (fck), size effect (d), longitudinal reinforcement ratio (ρsL), strengthening configurations, type of FRP: sheets or laminates (CFRP, GFRP), and FRP axial stiffness (AfEf)., This paper has been developed under the framework of the Research Projects “BIA2015‐64672‐C4‐1‐R” and “RTI2018‐097314‐BC21” funded by the Spanish Ministry of Economy and Competitiveness (MINECO) and co‐funded by the European Regional Development Funds (ERDF). The authors would also like to thank the Cost Action TU1207 which funded a short term scientific mission of the second author in Lodz University of Technology., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Model code approach to the SLS design of FRP reinforced concrete elements

  • Torres Llinàs, Lluís
  • Guadagnini, Maurizio
  • Barris Peña, Cristina
  • Matthys, Stijn
  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Baena Muñoz, Marta
Though research on FRP reinforcement has led to the development of several design recommendations over the past 25 years, recent efforts have focused on the development of unified design procedures and models that can account for the effect of both conventional steel and advanced FRP reinforcement. Examples of such efforts are testament to the level of maturity reached by this novel reinforcing solution and will facilitate a more widespread adoption of FRP reinforcement. The relatively lower modulus of elasticity of FRP materials compared to steel reinforcement may lead to large strains, crack widths and deflections, and as a consequence the design FRP reinforced concrete structures is often governed by serviceability requirements. This paper outlines the principles underlying the recommendations for the serviceability limit state design of FRP reinforced concrete structures included in the next generation of Model Code, discussing merits and limitations as well as comparing to other relevant proposals., Support provided by Spanish Ministry of Science and Innovation (MCIN/ AEI) and by European Funds for Regional Development through projects PID2020‐119015GB‐C22, RTI2018–097314-B-C21 and PID2021-123701OB-C21 is acknowledged.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Mechanical model for the shear strength prediction of corrosion-damaged reinforced concrete slender and non slender beams

  • Cladera Bohigas, Antoni
  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
  • Ribas González, Carlos Rodrigo
Steel corrosion in RC structures leads to a reduced reinforcement area, changes in steel mechanical properties, cracking and, eventually, concrete cover spalling, among other phenomena. Stirrups are generally small in diameter and, given their small concrete cover, they are more susceptible to corrosion than longitudinal reinforcement. Hence their corrosion significantly affects shear strength. Most existing models that deal with reduction in the shear strength of corrosion-damaged reinforced concrete (RC) structures are empirical; that is, they have been numerically fitted to test results. In this context, conceptual models based on structural mechanics principles and verified for corrosion-damaged members are still needed. In this paper, the Compression Chord Capacity Model (CCCM), a shear mechanical model previously derived by the authors, is adapted to predict the shear strength of corrosion-damaged RC beams. For this purpose, the model parameters that can be affected by steel corrosion in RC beams were identified and modified accordingly. CCCM predictions were compared to the experimental results of 146 slender and non slender beams failing in shear, in which stirrups and/or longitudinal reinforcement was subjected to corrosion. The CCCM achieved very satisfactory shear strength predictions when reductions in reinforcement areas and web width were taken into account, with a mean value of the Vtest/Vpred ratio equaling 1.19 and a 19.5% coefficient of variation. Finally, a parametric analysis was performed to show the predicted reductions in shear strength according to the CCCM compared to the experimental results of some especially relevant tests., The authors wish to acknowledge the financial support provided by the Spanish Ministry of Science, Innovation and Universities and European Funds for Regional Development (EU ERDF) through Research projects: RTI2018-099091-B-C22 (AEI/FEDER, UE) and RTI2018-097314-B-C21 (AEI/FEDER, UE)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Assessment of the existing models to evaluate the shear strength contribution of externally bonded FRP shear reinforcements

  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Kotynia, Renata
  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
This paper presents an analysis of the performance of different existing formulations to quantify the FRP contribution to the shear strength of RC elements strengthened in shear by externally bonded FRP sheets. A large database of 555 tests has been assembled distinguishing between the shape of the section, the existence of internal transverse reinforcement and the FRP configurations. In general, predictions are more conservative for beams without transverse reinforcement. In addition, in some cases predictions are unsafe for beams with transverse reinforcement, showing a possible interaction with the internal transverse reinforcement which is not considered in the experimental FRP contribution to the shear strength. For wrapped FRP configurations, models generally assumed failure at the bottom corner of the section and results are very conservative in some cases where failure was experimentally observed along the web. For U-shaped and side-bonded configuration, results depend mainly on the assumed bond model and are more accurate than in the previous case, showing for some models unsafe predictions for the continuous FRP system applied in beams with transverse reinforcement., This paper has been developed under the framework of the Research Projects “BIA2015-64672-575 C4-1-R” and “RTI2018-097314-B-C21” funded by the Spanish Ministry of Economy and Competitiveness (MINECO) and co-funded by the European Regional Development Funds (ERDF). The authors would also like to thank the Cost Action TU1207 which funded a short term scientific mission of the first author in Lodz University of Technology., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Shear strength assessment of FRP pre-tensioned concrete beams

  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Murcia Delso, Juan|||0000-0001-6424-7262
  • Bairán García, Jesús Miguel|||0000-0003-2831-1479
  • Duarte Gómez, Noemí|||0000-0002-4542-8487
The low susceptibility to corrosion of fiber reinforced composite materials (FRP) has led to considering their use for prestressing reinforcement, as an alternative to steel. However, the effects of FRP fragility, low elastic modulus, and low bond with concrete, when compared to usual prestressing steel, must be accounted for in the design of structures. This paper presents a theoretical model for predicting the shear strength of FRP prestressed pre-tensioned concrete beams, extending a previously developed model (CCCM), to account for the properties of FRP as active reinforcement, and to capture reductions in shear strength caused by bond loss in the FRP tendons. The model has been validated by comparing the theoretical predictions with the results of shear tests available in the literature. Good accuracy has been obtained in predicting the shear capacity and also in identifying those cases where shear failure is associated to loss of anchorage bond., The study presented in this paper was developed in the scope of research projects RTI2018-097314-B-C21 and PID2021-123701OB-C21 funded by the Spanish Ministry of Science and Innovation and the European Regional Development Funds (ERDF).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Theoretical model for the shear strength of prestressed concrete beams with FRP tendons

  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Murcia Delso, Juan|||0000-0001-6424-7262
  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
  • Legasa Melet, Tecla
This material may be downloaded for personal use only. Any other use requires prior permission of the American Society of Civil Engineers. This material may be found at https://ascelibrary.org/doi/abs/10.1061/JCCOF2.CCENG-4390., Prestressing tendons made of fiber-reinforced polymers (FRPs) are a promising alternative to conventional steel tendons in prestressed concrete structures owing to their corrosion resistance. However, the shear strength of FRP prestressed concrete beams is still not well understood. This paper presents a theoretical model for predicting the shear strength of prestressed concrete beams with FRP tendons or strands, with and without FRP shear reinforcement. The model is an extension of the compression chord capacity model (CCCM), originally proposed for steel-reinforced concrete structures, which has been adapted to account for the particularities of FRP as active and passive reinforcement. The model is applicable to rectangular, T, and I sections and accounts for reductions in shear strength caused by bond loss in FRP tendons. Experimental validation of the model was performed by comparing the theoretical predictions for 55 shear tests found in the literature. Good accuracy was obtained in predicting the ultimate shear capacity of beams and identifying shear bond failures observed in some tests., The study presented in this paper was developed in the scope of research projects RTI2018-097314-B-C21 and PID2021-123701OB-C21 funded by the Spanish Ministry of Science and Innovation and the European Regional Development Funds (ERDF)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Capítulo o parte de un libro (BookPart)

Stiffening solution of façade frames for reducing the eccentricity in plan-irregular buildings

  • Moyano, Gabriel
  • Bairán García, Jesús Miguel|||0000-0003-2831-1479
Adjusting to architectonic and urbanistic constraints in dense cities frequently require plan irregularities in structures. One recurrent case is the combination of a frame in the façade, to allow parking access, with structural walls in other perimeter axes, for drift control. In long plan buildings, this creates large eccentricities between the mass and stiffness centres. In this paper, we propose one solution that increases the stiffness of the façade frame, without affecting its functionality. The concept consists on creating vertical elements in the inner spans of the intermittent stories, producing a Vierendeel-effect in the frame. The feasibility to improve the seismic performance is investigated through non-linear models. The stiffened frame reduces the distance between the centres of stiffness and mass. The possible variation of the failure mode is discussed, and recommendations for the capacity design of the façade frame are given. It is found that the additional vertical element does not contribute in the gravity load system, so it should not be considered as an intermittent column irregularity. The concept is applied to a 10-storey plan-irregular building, with hypothetical location in Lima (Perú), and its seismic performance is assessed. Compared to the solution with the standard frame, the maximum floor displacement was reduced up to 30%. The dominant period of vibration was reduced up to 15%. The recommended capacity-design condition allowed ductile behaviour without local collapse for demands larger than the MCE., The authors acknowledge support of the Spanish State Research Agency and the European Funds for Regional Development, through the research project RTI2018-097314-BC21., Peer Reviewed, Objectius de Desenvolupament Sostenible::1 - Fi de la Pobresa::1.5 - Per a 2030, fomentar la resiliència de les persones pobres i aquelles que es troben en situacions vulnerables, i reduir-ne l’exposició i vulnerabilitat als fenòmens extrems relacionats amb el clima, així com altres crisis i des­astres econòmics, socials i ambientals, Objectius de Desenvolupament Sostenible::1 - Fi de la Pobresa, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.1 - Per a 2030, assegurar l’accés de totes les persones a habitatges i a serveis bàsics adequats, segurs i assequibles, i millorar els barris marginal, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.5 - Per a 2030, reduir de forma significativa el nombre de morts causades per desastres, inclosos els relacio­nats amb l’aigua, i de persones afectades per aquests, i reduir substancialment les pèrdues econòmiques directes causades per desastres relacionades amb el producte interior brut mundial, fent un èmfasi especial en la protecció de les persones pobres i de les persones en situacions de vulnerabilitat
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Reducing eccentricity in plan-irregular buildings through an innovative stiffening solution of the façade frames

  • Moyano, Gabriel
  • Bairán García, Jesús Miguel|||0000-0003-2831-1479
Adjusting to architectonic and urbanistic constraints in dense cities frequently require plan irregularities in structures. One recurrent case in many cities is the combination of a frame in the façade, to allow parking access, with structural walls in other perimeter axes, for drift control. In long structures, this solution creates large eccentricities between the mass and stiffness centres. This paper investigates one solution that significantly increases the stiffness of the façade frame, without affecting its functionality. The concept consists on creating vertical elements in the inner spans of the intermittent stories, producing a Vierendeel-effect in the frame. The stiffer frame closes the distance between the centres of stiffness and mass. The behaviour and possible variation of the failure mode are discussed in the paper, and recommendations for the capacity design of the façade frame are given. It is found that the additional vertical element does not contribute in the gravity load system; hence, it should not be considered as an intermittent column irregularity. This concept is applied to a 10-story plan-irregular building, with hypothetical location in Lima (Perú), and its seismic performance is assessed. Compared to the original solution, the maximum floor displacement was reduced up to 30%. The dominant period of vibration was reduced up to 15%. The recommended capacity-design condition allowed ductile behaviour without local collapse for demands larger than the MCE., The authors acknowledge support of the Spanish State Research Agency and the European Funds for Regional Development, through the research project RTI2018-097314-BC21.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Mechanical model for the shear strength of steel fibers reinforced concrete beams (SFRC) without stirrups, Modelo mecánico para la resistencia a cortante de vigas de hormigón armado reforzado con fibras, sin armadura de cortante

  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
  • Spinella, Nino
  • Recupero, Antonino
  • Cladera Bohigas, Antoni
Despite the numerous studies made showing that the addition of steel fibres to concrete enhances the shear strength of RC beams, current design formulations are still empirical and present large scatter in front of the test results. In this paper, the previously developed Multi-Action Shear Model is extended to SFRC beams without stirrups, adopting an analytical formulation to evaluate the residual tensile stress of SFRC and incorporating the effects of the crack bridging capacity of SFRC in the shear resisted trough the different shear-transfer mechanisms. The proposed model predicts the tests results included in a recently published database with 448 shear tests with less scatter than any of the existing models., The financial support provided by the University of Messina (Italy), through the scholarship granted for a two-months research and teaching stage of the first author, is acknowledged. This work is part of the Research Projects BIA2015-64672-C4-1-R, funded by the Spanish Ministry of Economy and competitiveness, and RTI2018-097314-B-C21, funded by the Spanish Ministry of Science and Innovation.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A variable order framework for 3D nonlinear analysis of reinforced concrete frames under general loading

  • Poliotti, Mauro
  • Bairán García, Jesús Miguel|||0000-0003-2831-1479
  • Moller, O.
A framework for the analysis of three-dimensional reinforced concrete frame structures, capable of reproducing general failure modes, is presented. A force-based model which guarantees the equilibrium between nodal and sectional forces is enhanced by means of a cross-sectional model. It is capable of capturing the complex coupling between all the internal forces. Consequently, different failure modes can be reproduced such as shear, torsional, flexural or axial failures. Material modeling of concrete is made using a plastic-damage model that incorporates a variable dilatancy parameter. The sectional and constitutive models are implemented in OpenSees. The sectional model can be used at each integration point of the force-based element. Alternatively, it can be used only where high coupling between the internal forces is expected, producing a variable order structural model. The validation shows that the frame element is capable of accurately reproduce beams and columns under monotonic and cyclic loads. The framework presented is a powerful numerical instrument for the analysis, design and assessment of reinforced concrete buildings and bridges., The first and second authors acknowledge the support provided by Spanish Ministry of Economy, Industry and Competitiveness and the European Regional Development Fund (ERDF), through the projects BIA2015-64672-C4-1R, BIA2012-36848 and RTI2018-097314-B-C21. The first author acknowledges the support of the Catalan Agency for University and Research through doctoral scholarship 2018FI-B1-00103. The third author acknowledges the support of the Research Council of Universidad Nacional de Rosario (CIUNR) and the Science and Technology Secretariat (SECyT), through the project 1ING601., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.a - Facilitar el desenvolupament d’infraestructures sostenibles i resilients als països en desenvolupament per mitjà de més suport financer, tecnològic i tècnic als països africans, països menys avançats, països en desenvolu­pament sense litoral i petits estats insulars en desenvolupament, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.b - Per a 2020, augmentar substancialment el nombre de ciutats i assentaments humans que adopten i posen en marxa polítiques i plans integrats per promoure la inclusió, l’ús eficient dels recursos, la mitigació del canvi climàtic i l’adaptació a aquest, així com la resiliència davant dels desastres, i desenvolupar i posar en pràctica una gestió integral dels riscos de desastre a tots els nivells, d’acord amb el Marc de Sendai per a la reducció del risc de desastres 2015.2030, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.5 - Per a 2030, reduir de forma significativa el nombre de morts causades per desastres, inclosos els relacio­nats amb l’aigua, i de persones afectades per aquests, i reduir substancialment les pèrdues econòmiques directes causades per desastres relacionades amb el producte interior brut mundial, fent un èmfasi especial en la protecció de les persones pobres i de les persones en situacions de vulnerabilitat
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Experimental study on the performance of fibre reinforced polymer pretensioned concrete beams

  • Ortiz Bernal, Galo Fabian|||0000-0002-9823-1637
  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
The use of FRP tendons as an alternative to conventional steel strands in prestressed concrete structures is very limited. There are many aspects that are still not clear enough to establish the basis of design of FRP prestressed concrete structures. To contribute to increase the current knowledge about the performance of this type of structures, an experimental campaign of tests on precast FRP pre-tensioned simply supported beams, without stirrups, is currently under development. The main purpose of this program was to study their performance at service and ultimate load levels. The experimental program includes 15 beams tested under flexure and shear, using steel, CFRP (carbon), GFRP (glass) rebars as active reinforcement, with different levels of prestressing force. Eight out of the fifteen beams have been tested in a 3-point bending configuration and failed unexpectedly in shear at an applied load lower than that predicted. The remaining seven beams have been tested in shear by applying a point load twice at both beam ends. This paper summarizes the preliminary results obtained in this program., The authors acknowledge 1the support provided by Spanish Ministry of Science and Innovation (MCIN/ AED and by the :European Funds for Regional Development in thefollowingprojects RTI2018-097314-B-C21, and PID2021-1237010B-C21. Theauthors would like to acknowledge Sireg for their courtesy supplying the different FRP embedded reinforcement used in the experimental programs.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Mechanical model for the shear strength of steel fiber reinforced concrete (SFRC) beams without stirrups

  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
  • Spinella, Nino
  • Recupero, Antonino
  • Cladera Bohigas, Antoni
The final publication is available at Springer via http://dx.doi.org/10.1617/s11527-020-01461-4., Numerous studies have shown that adding steel fibers to the concrete mixture improves both the shear strength and ductility of reinforced concrete beams. Most current shear design formulations for steel fiber reinforced concrete beams are empirically based and their predictions provide acceptable results when compared with tests results, but only in limited ranges of the parameters involved. On the other hand, many shear theoretical models suggested in the literature are derived by extending previous formulations for conventional reinforced concrete beams, just introducing the stresses transferred across the critical shear crack. Since the effects of steel fibers on the others shear resisting mechanisms are not accounted for, “adjusting” empirical factors must be used to fit the experimental results. There is, therefore, the need for developing mechanical models capable to rationally account for the effects of steel fibers on the global shear strength and on each shear resisting mechanisms. In this paper, the previously derived and validated Multi Action Shear Model for RC elements is extended to steel fiber reinforced concrete beams without stirrups. The effects of steel fibers on each resisting mechanism have been identified and incorporated in the formulation of each shear component and in the Multi-Action Shear Model equilibrium equations. The residual tensile stresses of fibrous concrete, obtained through a simple formulation, has been used to: capture the enhancement of the compression chord contribution; the shear transferred by bridging effect of the fibres along the critical shear crack and by dowel action. The proposed model is shown to properly estimate the shear resistance of a large set of available test data, being able to account for most influencing parameters, like fibers types and amounts, concrete strength, longitudinal reinforcement ratios and beam geometry., This work is part of the Research Projects BIA2015-64672-C4-1-R, funded by the Spanish Ministry of Economy and competitiveness, and RTI2018-097314-B-C21, funded by The Spanish Ministry of Science and Innovation., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Experimental bond performance of fibre reinforced polymer prestressed concrete elements

  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Ortiz Bernal, Galo Fabian|||0000-0002-9823-1637
  • Várzea, Nuno
  • Murcia Delso, Juan|||0000-0001-6424-7262
  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
In pretensioned prestressed concrete elements, bond between reinforcement and concrete differs is fundamental for a safe design. The so-called Hoyer effect, produced by the lateral expansion of a material when subjected to load, increases the bond resistance, but it also increases the circumferential stresses and then, the risk of cracking due to the tendon expansion. The bond behaviour of FRP tendons has not been studied in depth. To study the bond performance of FRP tendons, and characterize the transfer and flexural development length, an experimental program was carried out. This program was based on a setup called ECADA developed for steel tendons by the Universidad Politécnica de Valencia. The test specimen represents the anchorage area of the tendon and the remaining part of the theoretical beam is substituted by an anchorage measurement access system that has the same rigidity of the replaced part. The test starts by prestressing from one side and after concreting, the prestressed force is released gradually, then the transfer length is measured. Afterwards, the tendon is pulled from the other side, and the total development length is determined iteratively by producing samples of different lengths. The results of the ECADA tests have indicated that the transfer lengths of the FRP tendons being studied lie within 100 and 300 mm., The authors acknowledge the support provided by Spanish Ministry of Science and Innovation (MCIN/AEI) and by the European Funds for Regional Development in the following projects RTI2018-097314-B-C21, and PID2021-123701OB-C21. The authors would like to acknowledge Sireg for their courtesy supplying the different FRP embedded reinforcement used in the experimental programs.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Experimental response of fibre reinforced polymer (FRP) pretensioned concrete beams under 3-point bending tests

  • Ortiz Bernal, Galo Fabian|||0000-0002-9823-1637
  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
The use of fibre-reinforced polymers (FRP) as active reinforcement in prestressed concrete structures remains limited, primarily due to the lack of specific design standards and the scarcity of experimental data. In this context, this study aims to enhance understanding of the flexural behaviour of FRP-prestressed concrete members, without shear reinforcement, when the critical shear region is flexurally cracked. An experimental program comprising 3-point bending tests was conducted on ten simply supported precast concrete beams pretensioned with FRP bars or strands. The investigated parameters were the type of reinforcement material— GFRP bars, CFRP bars, CFCC and steel strands—and the level of prestressing. Almost all beams failed due to a diagonal inclined shear crack. However, in some of them, the active reinforcement was almost reaching its ultimate strength. For most specimens, the lower stiffness of the FRP reinforcement combined with a low prestressing level, led to a pronounced increase in curvature and crack width, and a reduction of the neutral axis depth of up to 75% compared to the uncracked stage. Consequently, their shear capacity decreased to a much greater extent than its flexural capacity, leading to the observed shear failure. This behaviour has been theoretically reproduced by the Compression Chord Capacity Shear Model, combined with a nonlinear flexural analysis to determine the neutral axis depth. Beams prestressed with CFRP bars resisted 16% higher loads than those with GFRP bars at the same prestressing level, while CFCC strands showed performance comparable to steel strands. For CFCC prestressed beams, an increase in prestressing force by 25% resulted in a 23% higher load capacity. Results highlight the critical role of stiffness and prestressing level in ultimate strength and failure mode., The authors want to acknowledge the financial support provided by Spanish Ministry of Science and Innovation (MICIU/AEI/10.13039/501100011033) and by the European Funds for Regional Development in the following projects RTI2018-097314-B-C21, and PCI2023-143361. The first author would like to acknowledge to the Spanish for the PhD grant PRE2019-088919. The authors would like to acknowledge Sireg for their courtesy supplying the different FRP embedded reinforcement used in the experimental programs., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Modeling serviceability performance and ultimate capacity of corroded reinforced and prestressed concrete structures

  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
  • Bairán García, Jesús Miguel|||0000-0003-2831-1479
  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Duarte Gómez, Noemí|||0000-0002-4542-8487
Corrosion reduces the area of reinforcement steel, affects its mechanical properties, the bond properties, and produces concrete cracking. Thus, reduction of the bearing capacity and stiffness, increments of deflections and redistribution of stresses and internal forces, in statically indeterminate structures, take place. In addition, the efficiency of strengthening systems of corroded structures depends on their state of stresses, strains and damage previously to strengthening. In this paper, a nonlinear and time dependent step by step analysis model for reinforced and prestressed concrete frames is presented. The model is capable of capturing the structural effects of corrosion and the effects of strengthening interventions, necessary to adequately assess corroded and strengthened structures. Several cases of corroded and strengthened structures are analyzed and the results discussed., The present work is part of research project RTI2018-097314-B-C21 funded by the Spanish Ministry of Science, Innovation and Universities through the Spanish Agency of Research (AEI), to whom the authors want to express their gratitude for the financial support received., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.2 - Per a 2030, proporcionar accés a sistemes de transport segurs, assequibles, accessi­bles i sostenibles per a totes les persones, i millorar la seguretat viària, en particular mitjan­çant l’ampliació del transport públic, amb especial atenció a les necessitats de les persones en situació vulnerable, dones, nenes, nens, persones amb discapacitat i persones grans, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.2 - Promoure una industrialització inclusiva i sostenible i, a tot tardar el 2030, augmentar de manera significativa la contribució de la indústria a l’ocupació i al producte interior brut, d’acord amb les circumstàncies nacionals, i duplicar aquesta contribució als països menys avançats, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.4 - Per a 2030, modernitzar les infraestructures i reconvertir les indústries perquè siguin sostenibles, usant els recursos amb més eficàcia i promovent l’adopció de tecnologies i processos industrials nets i racionals ambiental­ment, i aconseguint que tots els països adoptin mesures d’acord amb les capacitats respectives, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.a - Facilitar el desenvolupament d’infraestructures sostenibles i resilients als països en desenvolupament per mitjà de més suport financer, tecnològic i tècnic als països africans, països menys avançats, països en desenvolu­pament sense litoral i petits estats insulars en desenvolupament, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.1 - Per a 2030, assegurar l’accés de totes les persones a habitatges i a serveis bàsics adequats, segurs i assequibles, i millorar els barris marginal
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Life-cycle cost of CFRP and steel prestressed concrete elements

  • Bairán García, Jesús Miguel
  • Murcia Delso, Juan
  • Duarte Gómez, Noemí
  • Oller Ibars, Eva
  • Marí Bernat, Antonio Ricardo
Carbon steel reinforcement is vulnerable to corrosion, degrading the structure with time, and has large economic implications for aging infrastructures. CFRP is an alternative in reinforced and prestressed concrete, not prone to corrosion. However, its cost is considerably larger than steel, and its mechanical properties enforce different design criteria. Therefore, it is not evident when CFRP is a convenient solution. In this paper, benefits of CFRP reinforcement are investigated in LCC context. An archetype prestressed-concrete bridge is designed with the two types of reinforcement. Two environment scenarios are analyzed, representative of current and increased chloride concentration in coastal regions. The costs investigated include routine inspections, major repairs and users’ affectation. Although requiring less maintenance cost, the design with CFRP has a higher LCC that the steel-reinforced alternative, in the current chloride scenario close to the coast. However, in scenarios of larger chloride exposure, the CFRP solution may be more competitive., This study was developed in the scope of research projects PID2021-123701OB-C21, funded by MCIN/ AEI/10.13039/501100011033 and European Regional Development Funds (ERDF) “A way to make Europe”, and TED2021-130272B-C21 funded by MCIN/ AEI/10.13039/501100011033 “European Union NextGenerationEU/PRTR”., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Theoretical model for the shear strength of prestressed concrete beams with FRP tendons

  • Oller Ibars, Eva
  • Murcia Delso, Juan
  • Marí Bernat, Antonio Ricardo
  • Legasa Melet, Tecla
This material may be downloaded for personal use only. Any other use requires prior permission of the American Society of Civil Engineers. This material may be found at https://ascelibrary.org/doi/abs/10.1061/JCCOF2.CCENG-4390., Prestressing tendons made of fiber-reinforced polymers (FRPs) are a promising alternative to conventional steel tendons in prestressed concrete structures owing to their corrosion resistance. However, the shear strength of FRP prestressed concrete beams is still not well understood. This paper presents a theoretical model for predicting the shear strength of prestressed concrete beams with FRP tendons or strands, with and without FRP shear reinforcement. The model is an extension of the compression chord capacity model (CCCM), originally proposed for steel-reinforced concrete structures, which has been adapted to account for the particularities of FRP as active and passive reinforcement. The model is applicable to rectangular, T, and I sections and accounts for reductions in shear strength caused by bond loss in FRP tendons. Experimental validation of the model was performed by comparing the theoretical predictions for 55 shear tests found in the literature. Good accuracy was obtained in predicting the ultimate shear capacity of beams and identifying shear bond failures observed in some tests., The study presented in this paper was developed in the scope of research projects RTI2018-097314-B-C21 and PID2021-123701OB-C21 funded by the Spanish Ministry of Science and Innovation and the European Regional Development Funds (ERDF)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Efficiency of shear strengthening of RC beams with externally bonded FRP materials: state-of-the-art in the experimental tests

  • Kotynia, Renata
  • Oller Ibars, Eva
  • Kaszubska, Monika
  • Marí Bernat, Antonio Ricardo
This paper presents a study of the shear capacity of reinforced concrete (RC) beams strengthened in shear with externally bonded (EB) fiber reinforced polymer (FRP) composites, based on the performance of existing published tests. The main objective of this study is to create a comprehensive overview of the performance of different shear strengthening configurations and the failure modes observed in experimental tests. In addition, the influence of the following parameters on the strengthening efficiency has been analyzed: shear span to depth ratio (a/d), existing steel transverse reinforcement ratio (ρsw), concrete strength (fck), size effect (d), longitudinal reinforcement ratio (ρsL), strengthening configurations, type of FRP: sheets or laminates (CFRP, GFRP), and FRP axial stiffness (AfEf)., This paper has been developed under the framework of the Research Projects “BIA2015‐64672‐C4‐1‐R” and “RTI2018‐097314‐BC21” funded by the Spanish Ministry of Economy and Competitiveness (MINECO) and co‐funded by the European Regional Development Funds (ERDF). The authors would also like to thank the Cost Action TU1207 which funded a short term scientific mission of the second author in Lodz University of Technology., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessment of the existing models to evaluate the shear strength contribution of externally bonded FRP shear reinforcements

  • Oller Ibars, Eva
  • Kotynia, Renata
  • Marí Bernat, Antonio Ricardo
This paper presents an analysis of the performance of different existing formulations to quantify the FRP contribution to the shear strength of RC elements strengthened in shear by externally bonded FRP sheets. A large database of 555 tests has been assembled distinguishing between the shape of the section, the existence of internal transverse reinforcement and the FRP configurations. In general, predictions are more conservative for beams without transverse reinforcement. In addition, in some cases predictions are unsafe for beams with transverse reinforcement, showing a possible interaction with the internal transverse reinforcement which is not considered in the experimental FRP contribution to the shear strength. For wrapped FRP configurations, models generally assumed failure at the bottom corner of the section and results are very conservative in some cases where failure was experimentally observed along the web. For U-shaped and side-bonded configuration, results depend mainly on the assumed bond model and are more accurate than in the previous case, showing for some models unsafe predictions for the continuous FRP system applied in beams with transverse reinforcement., This paper has been developed under the framework of the Research Projects “BIA2015-64672-575 C4-1-R” and “RTI2018-097314-B-C21” funded by the Spanish Ministry of Economy and Competitiveness (MINECO) and co-funded by the European Regional Development Funds (ERDF). The authors would also like to thank the Cost Action TU1207 which funded a short term scientific mission of the first author in Lodz University of Technology., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Shear strength assessment of FRP pre-tensioned concrete beams

  • Marí Bernat, Antonio Ricardo
  • Oller Ibars, Eva
  • Murcia Delso, Juan
  • Bairán García, Jesús Miguel
  • Duarte Gómez, Noemí
The low susceptibility to corrosion of fiber reinforced composite materials (FRP) has led to considering their use for prestressing reinforcement, as an alternative to steel. However, the effects of FRP fragility, low elastic modulus, and low bond with concrete, when compared to usual prestressing steel, must be accounted for in the design of structures. This paper presents a theoretical model for predicting the shear strength of FRP prestressed pre-tensioned concrete beams, extending a previously developed model (CCCM), to account for the properties of FRP as active reinforcement, and to capture reductions in shear strength caused by bond loss in the FRP tendons. The model has been validated by comparing the theoretical predictions with the results of shear tests available in the literature. Good accuracy has been obtained in predicting the shear capacity and also in identifying those cases where shear failure is associated to loss of anchorage bond., The study presented in this paper was developed in the scope of research projects RTI2018-097314-B-C21 and PID2021-123701OB-C21 funded by the Spanish Ministry of Science and Innovation and the European Regional Development Funds (ERDF)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental response of fibre reinforced polymer (FRP) pretensioned concrete beams under 3-point bending tests

  • Ortiz Bernal, Galo Fabian
  • Oller Ibars, Eva
  • Marí Bernat, Antonio Ricardo
The use of fibre-reinforced polymers (FRP) as active reinforcement in prestressed concrete structures remains limited, primarily due to the lack of specific design standards and the scarcity of experimental data. In this context, this study aims to enhance understanding of the flexural behaviour of FRP-prestressed concrete members, without shear reinforcement, when the critical shear region is flexurally cracked. An experimental program comprising 3-point bending tests was conducted on ten simply supported precast concrete beams pretensioned with FRP bars or strands. The investigated parameters were the type of reinforcement material— GFRP bars, CFRP bars, CFCC and steel strands—and the level of prestressing. Almost all beams failed due to a diagonal inclined shear crack. However, in some of them, the active reinforcement was almost reaching its ultimate strength. For most specimens, the lower stiffness of the FRP reinforcement combined with a low prestressing level, led to a pronounced increase in curvature and crack width, and a reduction of the neutral axis depth of up to 75% compared to the uncracked stage. Consequently, their shear capacity decreased to a much greater extent than its flexural capacity, leading to the observed shear failure. This behaviour has been theoretically reproduced by the Compression Chord Capacity Shear Model, combined with a nonlinear flexural analysis to determine the neutral axis depth. Beams prestressed with CFRP bars resisted 16% higher loads than those with GFRP bars at the same prestressing level, while CFCC strands showed performance comparable to steel strands. For CFCC prestressed beams, an increase in prestressing force by 25% resulted in a 23% higher load capacity. Results highlight the critical role of stiffness and prestressing level in ultimate strength and failure mode., The authors want to acknowledge the financial support provided by Spanish Ministry of Science and Innovation (MICIU/AEI/10.13039/501100011033) and by the European Funds for Regional Development in the following projects RTI2018-097314-B-C21, and PCI2023-143361. The first author would like to acknowledge to the Spanish for the PhD grant PRE2019-088919. The authors would like to acknowledge Sireg for their courtesy supplying the different FRP embedded reinforcement used in the experimental programs., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental study on the performance of fibre reinforced polymer pretensioned concrete beams

  • Ortiz Bernal, Galo Fabian
  • Oller Ibars, Eva
  • Marí Bernat, Antonio Ricardo
The use of FRP tendons as an alternative to conventional steel strands in prestressed concrete structures is very limited. There are many aspects that are still not clear enough to establish the basis of design of FRP prestressed concrete structures. To contribute to increase the current knowledge about the performance of this type of structures, an experimental campaign of tests on precast FRP pre-tensioned simply supported beams, without stirrups, is currently under development. The main purpose of this program was to study their performance at service and ultimate load levels. The experimental program includes 15 beams tested under flexure and shear, using steel, CFRP (carbon), GFRP (glass) rebars as active reinforcement, with different levels of prestressing force. Eight out of the fifteen beams have been tested in a 3-point bending configuration and failed unexpectedly in shear at an applied load lower than that predicted. The remaining seven beams have been tested in shear by applying a point load twice at both beam ends. This paper summarizes the preliminary results obtained in this program., The authors acknowledge 1the support provided by Spanish Ministry of Science and Innovation (MCIN/ AED and by the :European Funds for Regional Development in thefollowingprojects RTI2018-097314-B-C21, and PID2021-1237010B-C21. Theauthors would like to acknowledge Sireg for their courtesy supplying the different FRP embedded reinforcement used in the experimental programs., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Reducing eccentricity in plan-irregular buildings through an innovative stiffening solution of the façade frames

  • Moyano, Gabriel
  • Bairán García, Jesús Miguel
Adjusting to architectonic and urbanistic constraints in dense cities frequently require plan irregularities in structures. One recurrent case in many cities is the combination of a frame in the façade, to allow parking access, with structural walls in other perimeter axes, for drift control. In long structures, this solution creates large eccentricities between the mass and stiffness centres. This paper investigates one solution that significantly increases the stiffness of the façade frame, without affecting its functionality. The concept consists on creating vertical elements in the inner spans of the intermittent stories, producing a Vierendeel-effect in the frame. The stiffer frame closes the distance between the centres of stiffness and mass. The behaviour and possible variation of the failure mode are discussed in the paper, and recommendations for the capacity design of the façade frame are given. It is found that the additional vertical element does not contribute in the gravity load system; hence, it should not be considered as an intermittent column irregularity. This concept is applied to a 10-story plan-irregular building, with hypothetical location in Lima (Perú), and its seismic performance is assessed. Compared to the original solution, the maximum floor displacement was reduced up to 30%. The dominant period of vibration was reduced up to 15%. The recommended capacity-design condition allowed ductile behaviour without local collapse for demands larger than the MCE., The authors acknowledge support of the Spanish State Research Agency and the European Funds for Regional Development, through the research project RTI2018-097314-BC21., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Strengthening of existing concrete structures with fibre reinforced polymers (FRP) in the new version of Eurocode 2, Refuerzo de estructuras existentes de hormigón con polímeros reforzados con fibras (PRF) en la nueva versión del Eurocódigo 2

  • Oller Ibars, Eva
  • de Diego, Ana
  • Torres Llinàs, Lluís
  • Madera, Pedro
This  paper  aims  to  introduce  the  content  of  Annex  J  “Strengthening  of  Existing  Concrete  Structures with CFRP” of Eurocode 2 [1]. This is first time that the design of adhesively bonded reinforcement  with  CFRP  has  been  introduced  in  the  European  regulations  through  an  informative annex. Annex J considers two different bonded strengthening techniques: externally bonded reinforcement (EBR) that consists of bonding CFRP strips or sheets to the surface of concrete elements, and near surface mounted reinforcement (NSM) that consists of embedded CFRP strips or rods to the slot cut in the concrete cover. Since, the content of Annex J is new, a summary  and  background  related  to  all  aspects  required  for  designing  CFRP  strengthened  systems for concrete structures, are given in this paper., The authors acknowledge the support provided by Spanish Ministry of Science and Innovation (MCIN/AEI) and by the European Funds for Regional Development in the following projects during their collaboration in the CTN140/SC2 and in the CEN/TC250/SC2/WG1/TG1 (Eva Oller): BIA2015‐64672‐C4‐1‐R, RTI2018‐097314‐B‐C21, and PID2020‐119015GB‐C22., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mechanical model for the shear strength of steel fiber reinforced concrete (SFRC) beams without stirrups

  • Marí Bernat, Antonio Ricardo
  • Spinella, Nino
  • Recupero, Antonino
  • Cladera Bohigas, Antoni
The final publication is available at Springer via http://dx.doi.org/10.1617/s11527-020-01461-4., Numerous studies have shown that adding steel fibers to the concrete mixture improves both the shear strength and ductility of reinforced concrete beams. Most current shear design formulations for steel fiber reinforced concrete beams are empirically based and their predictions provide acceptable results when compared with tests results, but only in limited ranges of the parameters involved. On the other hand, many shear theoretical models suggested in the literature are derived by extending previous formulations for conventional reinforced concrete beams, just introducing the stresses transferred across the critical shear crack. Since the effects of steel fibers on the others shear resisting mechanisms are not accounted for, “adjusting” empirical factors must be used to fit the experimental results. There is, therefore, the need for developing mechanical models capable to rationally account for the effects of steel fibers on the global shear strength and on each shear resisting mechanisms. In this paper, the previously derived and validated Multi Action Shear Model for RC elements is extended to steel fiber reinforced concrete beams without stirrups. The effects of steel fibers on each resisting mechanism have been identified and incorporated in the formulation of each shear component and in the Multi-Action Shear Model equilibrium equations. The residual tensile stresses of fibrous concrete, obtained through a simple formulation, has been used to: capture the enhancement of the compression chord contribution; the shear transferred by bridging effect of the fibres along the critical shear crack and by dowel action. The proposed model is shown to properly estimate the shear resistance of a large set of available test data, being able to account for most influencing parameters, like fibers types and amounts, concrete strength, longitudinal reinforcement ratios and beam geometry., This work is part of the Research Projects BIA2015-64672-C4-1-R, funded by the Spanish Ministry of Economy and competitiveness, and RTI2018-097314-B-C21, funded by The Spanish Ministry of Science and Innovation., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Stiffening solution of façade frames for reducing the eccentricity in plan-irregular buildings

  • Moyano, Gabriel
  • Bairán García, Jesús Miguel
Adjusting to architectonic and urbanistic constraints in dense cities frequently require plan irregularities in structures. One recurrent case is the combination of a frame in the façade, to allow parking access, with structural walls in other perimeter axes, for drift control. In long plan buildings, this creates large eccentricities between the mass and stiffness centres. In this paper, we propose one solution that increases the stiffness of the façade frame, without affecting its functionality. The concept consists on creating vertical elements in the inner spans of the intermittent stories, producing a Vierendeel-effect in the frame. The feasibility to improve the seismic performance is investigated through non-linear models. The stiffened frame reduces the distance between the centres of stiffness and mass. The possible variation of the failure mode is discussed, and recommendations for the capacity design of the façade frame are given. It is found that the additional vertical element does not contribute in the gravity load system, so it should not be considered as an intermittent column irregularity. The concept is applied to a 10-storey plan-irregular building, with hypothetical location in Lima (Perú), and its seismic performance is assessed. Compared to the solution with the standard frame, the maximum floor displacement was reduced up to 30%. The dominant period of vibration was reduced up to 15%. The recommended capacity-design condition allowed ductile behaviour without local collapse for demands larger than the MCE., The authors acknowledge support of the Spanish State Research Agency and the European Funds for Regional Development, through the research project RTI2018-097314-BC21., Peer Reviewed, Objectius de Desenvolupament Sostenible::1 - Fi de la Pobresa::1.5 - Per a 2030, fomentar la resiliència de les persones pobres i aquelles que es troben en situacions vulnerables, i reduir-ne l’exposició i vulnerabilitat als fenòmens extrems relacionats amb el clima, així com altres crisis i des­astres econòmics, socials i ambientals, Objectius de Desenvolupament Sostenible::1 - Fi de la Pobresa, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.1 - Per a 2030, assegurar l’accés de totes les persones a habitatges i a serveis bàsics adequats, segurs i assequibles, i millorar els barris marginal, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.5 - Per a 2030, reduir de forma significativa el nombre de morts causades per desastres, inclosos els relacio­nats amb l’aigua, i de persones afectades per aquests, i reduir substancialment les pèrdues econòmiques directes causades per desastres relacionades amb el producte interior brut mundial, fent un èmfasi especial en la protecció de les persones pobres i de les persones en situacions de vulnerabilitat, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental bond performance of fibre reinforced polymer prestressed concrete elements

  • Oller Ibars, Eva
  • Ortiz Bernal, Galo Fabian
  • Várzea, Nuno
  • Murcia Delso, Juan
  • Marí Bernat, Antonio Ricardo
In pretensioned prestressed concrete elements, bond between reinforcement and concrete differs is fundamental for a safe design. The so-called Hoyer effect, produced by the lateral expansion of a material when subjected to load, increases the bond resistance, but it also increases the circumferential stresses and then, the risk of cracking due to the tendon expansion. The bond behaviour of FRP tendons has not been studied in depth. To study the bond performance of FRP tendons, and characterize the transfer and flexural development length, an experimental program was carried out. This program was based on a setup called ECADA developed for steel tendons by the Universidad Politécnica de Valencia. The test specimen represents the anchorage area of the tendon and the remaining part of the theoretical beam is substituted by an anchorage measurement access system that has the same rigidity of the replaced part. The test starts by prestressing from one side and after concreting, the prestressed force is released gradually, then the transfer length is measured. Afterwards, the tendon is pulled from the other side, and the total development length is determined iteratively by producing samples of different lengths. The results of the ECADA tests have indicated that the transfer lengths of the FRP tendons being studied lie within 100 and 300 mm., The authors acknowledge the support provided by Spanish Ministry of Science and Innovation (MCIN/AEI) and by the European Funds for Regional Development in the following projects RTI2018-097314-B-C21, and PID2021-123701OB-C21. The authors would like to acknowledge Sireg for their courtesy supplying the different FRP embedded reinforcement used in the experimental programs., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Model code approach to the SLS design of FRP reinforced concrete elements

  • Torres Llinàs, Lluís
  • Guadagnini, Maurizio
  • Barris Peña, Cristina
  • Matthys, Stijn
  • Oller Ibars, Eva
  • Baena Muñoz, Marta
Though research on FRP reinforcement has led to the development of several design recommendations over the past 25 years, recent efforts have focused on the development of unified design procedures and models that can account for the effect of both conventional steel and advanced FRP reinforcement. Examples of such efforts are testament to the level of maturity reached by this novel reinforcing solution and will facilitate a more widespread adoption of FRP reinforcement. The relatively lower modulus of elasticity of FRP materials compared to steel reinforcement may lead to large strains, crack widths and deflections, and as a consequence the design FRP reinforced concrete structures is often governed by serviceability requirements. This paper outlines the principles underlying the recommendations for the serviceability limit state design of FRP reinforced concrete structures included in the next generation of Model Code, discussing merits and limitations as well as comparing to other relevant proposals., Support provided by Spanish Ministry of Science and Innovation (MCIN/ AEI) and by European Funds for Regional Development through projects PID2020‐119015GB‐C22, RTI2018–097314-B-C21 and PID2021-123701OB-C21 is acknowledged., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Mechanical model for the shear strength of steel fibers reinforced concrete beams (SFRC) without stirrups, Modelo mecánico para la resistencia a cortante de vigas de hormigón armado reforzado con fibras, sin armadura de cortante

  • Marí Bernat, Antonio Ricardo
  • Spinella, Nino
  • Recupero, Antonino
  • Cladera Bohigas, Antoni
Despite the numerous studies made showing that the addition of steel fibres to concrete enhances the shear strength of RC beams, current design formulations are still empirical and present large scatter in front of the test results. In this paper, the previously developed Multi-Action Shear Model is extended to SFRC beams without stirrups, adopting an analytical formulation to evaluate the residual tensile stress of SFRC and incorporating the effects of the crack bridging capacity of SFRC in the shear resisted trough the different shear-transfer mechanisms. The proposed model predicts the tests results included in a recently published database with 448 shear tests with less scatter than any of the existing models., The financial support provided by the University of Messina (Italy), through the scholarship granted for a two-months research and teaching stage of the first author, is acknowledged. This work is part of the Research Projects BIA2015-64672-C4-1-R, funded by the Spanish Ministry of Economy and competitiveness, and RTI2018-097314-B-C21, funded by the Spanish Ministry of Science and Innovation., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A variable order framework for 3D nonlinear analysis of reinforced concrete frames under general loading

  • Poliotti, Mauro
  • Bairán García, Jesús Miguel
  • Moller, O.
A framework for the analysis of three-dimensional reinforced concrete frame structures, capable of reproducing general failure modes, is presented. A force-based model which guarantees the equilibrium between nodal and sectional forces is enhanced by means of a cross-sectional model. It is capable of capturing the complex coupling between all the internal forces. Consequently, different failure modes can be reproduced such as shear, torsional, flexural or axial failures. Material modeling of concrete is made using a plastic-damage model that incorporates a variable dilatancy parameter. The sectional and constitutive models are implemented in OpenSees. The sectional model can be used at each integration point of the force-based element. Alternatively, it can be used only where high coupling between the internal forces is expected, producing a variable order structural model. The validation shows that the frame element is capable of accurately reproduce beams and columns under monotonic and cyclic loads. The framework presented is a powerful numerical instrument for the analysis, design and assessment of reinforced concrete buildings and bridges., The first and second authors acknowledge the support provided by Spanish Ministry of Economy, Industry and Competitiveness and the European Regional Development Fund (ERDF), through the projects BIA2015-64672-C4-1R, BIA2012-36848 and RTI2018-097314-B-C21. The first author acknowledges the support of the Catalan Agency for University and Research through doctoral scholarship 2018FI-B1-00103. The third author acknowledges the support of the Research Council of Universidad Nacional de Rosario (CIUNR) and the Science and Technology Secretariat (SECyT), through the project 1ING601., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.a - Facilitar el desenvolupament d’infraestructures sostenibles i resilients als països en desenvolupament per mitjà de més suport financer, tecnològic i tècnic als països africans, països menys avançats, països en desenvolu­pament sense litoral i petits estats insulars en desenvolupament, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.b - Per a 2020, augmentar substancialment el nombre de ciutats i assentaments humans que adopten i posen en marxa polítiques i plans integrats per promoure la inclusió, l’ús eficient dels recursos, la mitigació del canvi climàtic i l’adaptació a aquest, així com la resiliència davant dels desastres, i desenvolupar i posar en pràctica una gestió integral dels riscos de desastre a tots els nivells, d’acord amb el Marc de Sendai per a la reducció del risc de desastres 2015.2030, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.5 - Per a 2030, reduir de forma significativa el nombre de morts causades per desastres, inclosos els relacio­nats amb l’aigua, i de persones afectades per aquests, i reduir substancialment les pèrdues econòmiques directes causades per desastres relacionades amb el producte interior brut mundial, fent un èmfasi especial en la protecció de les persones pobres i de les persones en situacions de vulnerabilitat, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessment of the efficiency of strengthening solutions in concrete structures by means of non-linear step by step analysis models, Evaluación de la eficiencia de soluciones de refuerzo en estructuras de hormigón mediante análisis no lineal evolutivo

  • Marí Bernat, Antonio Ricardo
  • Bairán García, Jesús Miguel
  • Oller Ibars, Eva
When designing a structural strengthening solution, the influence of the previous state of the structure on the capacity of the strengthened structure must be evaluated. In addition, strengthening interventions may involve operations such as partial unloading of the structure, placement and removal of temporary shores, application of loads or pre-deformations, restoring of damaged reinforcement or spalled con-crete or constraining of lateral strains. Therefore, changes in the cross-section geometry and reinforcement, longitudinal scheme, support conditions, loads and state of stresses and strains, may take place. Furthermore, occurrence of phenomena producing a premature failure or a change in the failure mode, should be avoided. In order to account for such a large variety of causes and phenomena affecting the structural response, a nonlinear and time-dependent analysis model of 3D reinforced and prestressed concrete frames, capable of capturing different failure modes and taking into account the structural history, is described. The model has been verified with tests on strengthened structures available in the literature and has been applied to an actually remodeled structure, comparing the advantages and disadvantages of two different strengthening proposals, showing its capabilities to assess the efficiency of structural strengthening systems., This paper is dedicated to the memory of an extraordinary engineer and human being, Luis Ortega Basagoiti, who was an example and reference for structural engineers and researchers along his professional career. The works described in this paper have been developed in the framework of the following research projects funded by the Spanish Science and Technology Ministries and by the European Funds for Regional Development, ADRESS (BIA2009-11764), REHABCAR (IPT-370000-2010-029), HORVITAL (BIA2015-64672-C4-1-R) and STRADURAVIUS (RTI2018-097314-B-C21)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modeling serviceability performance and ultimate capacity of corroded reinforced and prestressed concrete structures

  • Marí Bernat, Antonio Ricardo
  • Bairán García, Jesús Miguel
  • Oller Ibars, Eva
  • Duarte Gómez, Noemí
Corrosion reduces the area of reinforcement steel, affects its mechanical properties, the bond properties, and produces concrete cracking. Thus, reduction of the bearing capacity and stiffness, increments of deflections and redistribution of stresses and internal forces, in statically indeterminate structures, take place. In addition, the efficiency of strengthening systems of corroded structures depends on their state of stresses, strains and damage previously to strengthening. In this paper, a nonlinear and time dependent step by step analysis model for reinforced and prestressed concrete frames is presented. The model is capable of capturing the structural effects of corrosion and the effects of strengthening interventions, necessary to adequately assess corroded and strengthened structures. Several cases of corroded and strengthened structures are analyzed and the results discussed., The present work is part of research project RTI2018-097314-B-C21 funded by the Spanish Ministry of Science, Innovation and Universities through the Spanish Agency of Research (AEI), to whom the authors want to express their gratitude for the financial support received., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.2 - Per a 2030, proporcionar accés a sistemes de transport segurs, assequibles, accessi­bles i sostenibles per a totes les persones, i millorar la seguretat viària, en particular mitjan­çant l’ampliació del transport públic, amb especial atenció a les necessitats de les persones en situació vulnerable, dones, nenes, nens, persones amb discapacitat i persones grans, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.2 - Promoure una industrialització inclusiva i sostenible i, a tot tardar el 2030, augmentar de manera significativa la contribució de la indústria a l’ocupació i al producte interior brut, d’acord amb les circumstàncies nacionals, i duplicar aquesta contribució als països menys avançats, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.4 - Per a 2030, modernitzar les infraestructures i reconvertir les indústries perquè siguin sostenibles, usant els recursos amb més eficàcia i promovent l’adopció de tecnologies i processos industrials nets i racionals ambiental­ment, i aconseguint que tots els països adoptin mesures d’acord amb les capacitats respectives, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.a - Facilitar el desenvolupament d’infraestructures sostenibles i resilients als països en desenvolupament per mitjà de més suport financer, tecnològic i tècnic als països africans, països menys avançats, països en desenvolu­pament sense litoral i petits estats insulars en desenvolupament, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.1 - Per a 2030, assegurar l’accés de totes les persones a habitatges i a serveis bàsics adequats, segurs i assequibles, i millorar els barris marginal, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Embedded fibre reinforced polymer (FRP) reinforcement in concrete structures according to the new version of Eurocode 2, Armadura de polímeros reforzados con fibras (PRF) para estructuras de hormigón en la nueva versión del Eurocódigo 2

  • Oller Ibars, Eva
  • Torres Llinàs, Lluís
  • de Diego, Ana
The new version of Eurocode 2 will include for the first time an informative annex, Annex R “Embedded FRP reinforcement”, to design reinforced concrete structures with fibre reinforced polymer (FRP) reinforcement. FRP embedded reinforcement has some advantages such as their low susceptibility to corrosion, high-strength, and low life-cycle cost. FRP rebars can be used as longitudinal or transverse reinforcement in a similar way than conventional steel rebars. However, in the design of FRP reinforced concrete structures, some particular aspects related to the reinforcement properties must be taken into account, among which it is worth highlighting their linear elastic behaviour until failure, their relatively low modulus of elasticity or their behaviour under sustained stresses. Since, the content of Annex R is new, a summary and background related to all aspects required for designing with FRP reinforcement are given in this paper., The authors acknowledge the support provided by Spanish Ministry of Science and Innovation (MCIN/  AEI)  and  by  the  European  Funds  for  Regional  Development  in  the  following  projects  during their collaboration in the TN140/SC2 and in the CEN/TC250/SC2/WG1/TG1 (Eva Oller): BIA2015‐64672‐C4‐1‐R, RTI2018‐097314‐B‐C21, and PID2020‐119015GB‐C22., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mechanical model for the shear strength prediction of corrosion-damaged reinforced concrete slender and non slender beams

  • Cladera Bohigas, Antoni
  • Marí Bernat, Antonio Ricardo
  • Ribas González, Carlos Rodrigo
Steel corrosion in RC structures leads to a reduced reinforcement area, changes in steel mechanical properties, cracking and, eventually, concrete cover spalling, among other phenomena. Stirrups are generally small in diameter and, given their small concrete cover, they are more susceptible to corrosion than longitudinal reinforcement. Hence their corrosion significantly affects shear strength. Most existing models that deal with reduction in the shear strength of corrosion-damaged reinforced concrete (RC) structures are empirical; that is, they have been numerically fitted to test results. In this context, conceptual models based on structural mechanics principles and verified for corrosion-damaged members are still needed. In this paper, the Compression Chord Capacity Model (CCCM), a shear mechanical model previously derived by the authors, is adapted to predict the shear strength of corrosion-damaged RC beams. For this purpose, the model parameters that can be affected by steel corrosion in RC beams were identified and modified accordingly. CCCM predictions were compared to the experimental results of 146 slender and non slender beams failing in shear, in which stirrups and/or longitudinal reinforcement was subjected to corrosion. The CCCM achieved very satisfactory shear strength predictions when reductions in reinforcement areas and web width were taken into account, with a mean value of the Vtest/Vpred ratio equaling 1.19 and a 19.5% coefficient of variation. Finally, a parametric analysis was performed to show the predicted reductions in shear strength according to the CCCM compared to the experimental results of some especially relevant tests., The authors wish to acknowledge the financial support provided by the Spanish Ministry of Science, Innovation and Universities and European Funds for Regional Development (EU ERDF) through Research projects: RTI2018-099091-B-C22 (AEI/FEDER, UE) and RTI2018-097314-B-C21 (AEI/FEDER, UE)., Peer Reviewed, Postprint (published version)