Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Influence of the reference electrode position on the intensity corrosion measurements in reinforced concrete

  • Lliso-Ferrando, Josep Ramon|||0000-0002-2457-9024
  • Valcuende Payá, Manuel Octavio|||0000-0002-9967-1554
  • Gasch, Isabel|||0000-0001-7036-4481
  • Gandía-Romero, Jose M.|||0000-0003-0257-3286
[EN] Corrosion of the steel embedded in reinforced concrete is one the biggest problems that affects concrete structures durability. High alkalinity of this material protects the steel creating a passive layer, which chloride penetration or concrete carbonation destroy. In favourable conditions, as high humidity or oxygen presence, once the passive layer has been destroyed, active corrosion of the steel promotes loss of profile and reduces the adherence. The damage can be appreciated outside the elements once it is really advanced. Using methods to detect the beginning of active corrosion and control the damage can be a helpful tool to avoid expensive repairs after a late detection of the phenomena [1]. Including a sensor network in structures will let monitor the corrosion processes inside them. Voltammetric analysis using sensors requires a counter electrode (CE) and a reference electrode (RE). Due to economic issues and maintenance, most times it is just one reference embedded. This fact generates a large distance between the reference electrode and some sensors, incurring a wrong analysed values lecture. The aim of this paper is analysing the influence of the distance between sensors and the reference electrodes to get several measures which can let us arrange a statistic reliability. In this case, an external reference electrode will be used, letting move it, for measure at different distances from the sensor. For that purpose, in this studio will be used the voltammetric method, developed by Alcañiz et Al [2]., The authors would like to express their gratitude to the Universitat Politècnica de València for the pre-doctoral scholarship granted to Josep Ramon Lliso Ferrando (FPI-UPV2018), and the financial support from the Spanish Ministry of Economy and Competitiveness by the national program of oriented research, development and Innovation to societal challenges (ref. BIA2016-78460-C3-3-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Experimental characterization of the refrigerant distribution along a finned tubes heat exchanger

  • Sánchez-Moreno-Giner, Luis
  • López-Juárez, Emilio
  • López-Navarro, Alejandro|||0000-0002-0286-7965
  • Gonzálvez-Maciá, José|||0000-0001-9422-7756
[EN] According to the European Commission, heating, cooling and domestic hot water (DHW) production imply 79% of the total energy consumed in households. Moreover, as 84% of this energy is still generated from fossil fuels, it is required taking measures in order to improve the current situation. Following this intention, the path of the European Union is the reduction of the energy consumption and increasing the percentage of energy produced by renewable sources. One way to achieve the objectives set by the European Union is by the use of the heat pump powered by renewable sources, while the directive 2009/28/CE consider that heat pumps use renewable sources under certain conditions. Nowadays, refrigerants used by heat pumps are mainly hydrofluorocarbons (HFCs) which have a high global warming potential (GWP) and have a clear deadline defined at F-Gas EU Regulation 517/2014. For this reason, natural refrigerants, will play an important role within heating, cooling and DHW production at household sector. However, most of the natural refrigerants with acceptable thermodynamic properties are at least slightly flammable, and this attempt against the safety. For this reason, the amount of refrigerant charge must satisfy the maximum refrigerant charge limited by regulations, and the prediction of this maximum charge has become an important matter within the design process of a heat pump. Nevertheless, calculating the amount of refrigerant for a given heat pump is a difficult process with many uncertainties, like refrigerant mal-distribution in heat exchangers. In this work, an experimental characterization of the amount of refrigerant along the finned tubes heat exchanger (FTHE) of a heat pump working with R290 has been done. This qualitative and quantitative study has been carried out by measuring and comparing the temporary temperatures pattern distribution of the refrigerant in the FTHE, using thermocouples and thermographies, Luis Sánchez-Moreno-Giner acknowledges the Research and Development Aid Program (PAID01-17) of the Universitat Politècnica de València for receiving the Research Fellowship FPIUPV-2017.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Comparative study of the performance of a heat pump for heating with R410A and R32 as refrigerant, using the software IMST-ART

  • Sánchez-Moreno-Giner, Luis
  • López-Juárez, Emilio
  • Gonzálvez-Maciá, José|||0000-0001-9422-7756
[EN] According to the European Commission, at this moment, heating and cooling in buildings account for half of the energy consumption, while only a 16% of the energy used in this issue is obtained employing renewable sources. One of the possible solutions to improve the current situation is the use of heat pumps for the air conditioning of buildings. However, the refrigerants used at this moment are hydrofluorocarbons (HFCs) and they have a global warming potential (GWP) elevated so that new refrigerants which can substitute the current ones are being searched. The most used refrigerant for heating applications is the R410A, which is a mixture of HFCs. Its immediate retrofit is one of its components, the R32, due to the compatibility of both refrigerants with the materials and its similar performance. Furthermore, the R32 has a value of GWP approximately of a third of the R410 s value. The objective of this work is to evaluate the main differences between the results obtained with both refrigerants and to find out the main changes to be done to obtain at least the same performance. In this work, a model of IMST-ART of an air-water heat pump is presented using both refrigerants. In the model, both refrigerants are evaluated for different conditions of heating at low temperature. Lately, a summary of changes is proposed in order to cover the same functions, or more, than the original heat pump., Luis Sánchez-Moreno-Giner acknowledges the Research and Development Aid Program (PAID01-17) of the Universitat Politècnica de València for receiving the Research Fellowship FPIUPV-2017.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Aplicabilidad de modelos teóricos de propagación para entorno urbano en la estimación de las pérdidas a 3.5 GHz en plantaciones de cítricos

  • Juan-Llácer, Leandro
  • Párraga Riquelme, David
  • Martínez-Inglés, María Teresa
  • Molina García-Pardo, José María
  • Rodríguez, José Víctor
  • Pascual-García, Juan
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] Agriculture 4.0 represents a considerable increase in the number of sensors, as well as the appearance of new wireless technologies, which will mean the need to efficiently planning radio communication systems in agricultural environments. In this work, the applicability of the WalfischBertoni and the Ikegami propagation models that have been used to estimate propagation losses in urban environments, has been studied in citrus plantations. The similarities and differences of the profiles between the transmitter and the receiver, have been analyzed to identify the dominant propagation mechanisms in each case: buildings, in urban environments, and trees, in citrus plantations, assuming that the height of the transmitter is above the height of the trees and the height of the receiver below them. The propagation losses estimated by the models have been compared with the measurements carried out at the 3.5GHz frequency (one of the 5G bands) in a lemon plantation after the fruit was collected. Under these conditions, it has been observed how the slope of the regression line of the measurements has a value of 2.7, far from that obtained by the Walfisch-Bertoni model and closer to the one estimated by the Ikegami model. Furthermore, when analyzing the error between the theoretical and the measured losses, a standard deviation of 6.39dB is observed for the Walfisch-Bertoni model and 4.91dB for the Ikegami model., Este trabajo ha sido financiado por la Comunidad Autónoma de la Región de Murcia a través del proyecto 20804/PI/18 de la convocatoria de Ayudas a proyectos para el desarrollo de investigación científica y técnica por grupos competitivos, incluida en el Programa Regional de Fomento de la Investigación (Plan de Actuación 2019) de la Fundación Séneca, Agencia de Ciencia y Tecnología de la Región de Murcia y por el Ministerio de Economía y Competitividad MINECO, Spain (TEC2016-78028-C3-2-P).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A Traceability-based Method to Support Conceptual Model Evolution

  • Ruiz Carmona, Luz Marcela
Renewing software systems is one of the most cost-effective ways to protect software investment, which saves time, money and ensures uninter- rupted access to technical support and product upgrades. There are several mo- tivations to promote investment and scientific effort for specifying systems by means of conceptual models and supporting its evolution. As an example, the software engineering community is addressing solutions for supporting model traceability, continuous improvement of business process, organisational reen- gineering, information system maintenance, etc. Model-driven techniques have been developed in order to analyse systems raising the abstraction level of its specification. However, a support for conceptual model evolution by means of model-driven techniques is still needed. This thesis proposes a traceability- based method that involves model-driven capabilities for designing and provid- ing guidelines, techniques, and tools to support conceptual model evolution. The main idea is to support information system analysts in the tasks related to: justify why the conceptual models have evolved, report and specify what ele- ments have evolved, and guide how to carry out evolution in certain predefined organisational contexts. We plan to apply our method to guide the evolution of an E-shopping software. This way, we also provide mechanism to facilitate in- dustrial adoption., This PhD project has been supported by the Spanish Generalitat Valenciana ORCA (PROMETEO/2009/015); the FPI grant of the Universitat Politècnica de València (3146); the European Commission FP7 Project CaaS (611351); and the ERDF structural funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Aplicación de un modelo de detector BEGe en MCNP6 como apoyo a la realización de medidas por espectrometría gamma en un laboratorio en caso de emergencia nuclear o radiactiva

  • Ordóñez-Ródenas, José|||0000-0001-8150-4873
  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Ortiz Moragón, Josefina
[ES] Uno de los problemas al medir actividades altas como las de un escenario de emergencia es la posible saturación del detector o la obtención un tiempo muerto de medición demasiado alto como para dar resultados fiables. Esto llevaría a repetir la medida en diferentes condiciones aumentando el tiempo de respuesta y, por consiguiente, el riesgo de exposición de los trabajadores del laboratorio. La tasa de cuentas medidas por el detector se puede controlar variando la distancia de la muestra al detector, así como utilizando diferentes volúmenes de fuente. Se ha desarrollado un modelo de Monte Carlo de un detector BEGe para analizar la respuesta en eficiencia del sistema para varias geometrías de medición (distancias y volúmenes). Las curvas de eficiencia total para muchas de las configuraciones utilizadas en el laboratorio se obtienen utilizando el código MCNP6 para un rango de energía de entre 59.5 keV y 1836.0 keV. Las simulaciones han permitido estimar la emisión gamma admisible para diferentes volúmenes de fuente (en matriz de agua) y distancias de muestra a detector que evite la saturación del mismo. Los resultados conducen a lograr un compromiso entre la geometría, la distancia y el tiempo de medición para una determinada condición en situaciones de emergencia. Se proporcionan tres casos de aplicación para explicar cómo funciona el enfoque propuesto., Los autores agradecen a la Cátedra CSN-UPV Vicente Serradell, así como al Laboratorio de Radiactividad Ambiental (Universitat Politècnica de València), por la financiación y los recursos dedicados a este trabajo de investigación en virtud de la subvención no. FPI-2015-S2-1576. Además, los autores agradecen a la Agencia Valenciana de Seguridad y Emergencias y a la Generalitat Valenciana por su apoyo en el "Convenio de colaboración entre la Agencia Valenciana de Seguridad y Respuesta a las Emergencias y la Universitat Politècnica de València para el Desarrollo del Plan de Vigilancia Radiológica en Emergencias¿ bajo la Subvención No. S7042000, 2018.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Estudio de la respuesta de un TLD100-HARSHAW mediante el código de Monte Carlo MCNP6

  • Ordóñez-Ródenas, José|||0000-0001-8150-4873
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
  • Ortiz Moragón, Josefina
[ES] El código MCNP6 se ha utilizado para desarrollar un modelo de Monte Carlo del TLD100- HARSHAW, incluyendo una fuente colimada y un fantoma de agua con paredes de PMMA (ISO water slab phantom). Para calcular el kerma en aire y las dosis superficial Hp (0.07) y profunda Hp (10), se aplica un tally F6 (MeV/g). Este modelo permite obtener la función de respuesta relativa en energía (RRE) normalizada al 137Cs para haces de diferente calidad y ángulos de incidencia. La validación del modelo se lleva a cabo comparando datos simulados con experimentales utilizando diferentes calidades de haz de rayos-X de acuerdo con la norma ISO-4037-3. El código MCNP6 representa una herramienta muy útil para analizar las mediciones experimentales y a su vez para realizar calibraciones de TLDs sin necesidad de irradiarlos., Los autores agradecen a la Cátedra CSN-UPV Vicente Serradell, así como al Laboratorio de Radiactividad Ambiental (Universitat Politècnica de València), por la financiación y los recursos dedicados a este trabajo de investigación en virtud de la subvención no. FPI-2015-S2-1576.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo y evaluación de una estación de control de tierra para vehículos aéreos no tripulados

  • Velasco Carrau, Jesús
  • Reynoso Meza, Gilberto
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Sanchís Saez, Javier|||0000-0001-9697-2696
Los vehículos aéreos no tripulados (UAV¿s) son vehículos autónomos, diseñados para cumplir con diversas misiones en el ámbito civil y militar. Actualmente, se comienza a extender su uso en situaciones donde la misión de vuelo conlleva la posibilidad de riesgo de pérdidas humanas. En el siguiente documento, se describe el desarrollo del sistema de telemetría para la gestión de las comunicaciones entre dispositivos UAVs y las estaciones de tierra que monitorizan el comportamiento de estos sistemas.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Análisis de las pérdidas de propagación medidas en una plantación de cítricos en las bandas de 1800 MHz, 2100 MHz, 3.5 GHz y 28 GHz en una situación de LoS

  • Juan-Llácer, Leandro
  • Martínez Rubiola, Luis
  • Molina-García-Pardo, José María
  • Martínez-Inglés, María Teresa
  • Rodríguez, José-Víctor
  • Pascual-García, Juan
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] Agriculture 4.0 is going to represent a massive deployment of sensors, so efficient planning of radiocommunication systems in this type of environment will be necessary. In this work, the measured path loss in a LoS situation, with the transmitter and receiver heights below the trees height, at a citrus plantation in the 1800MHz, 2100MHz, 3.5GHz and 28GHz frequency bands using the FI (Floating Intercept) and the CI (Close-In reference) models has been analyzed. It has been observed that from 3.5GHz, the slope of the FI model also represents the propagation exponent (PLE). Furthermore, a guiding effect (PLE less than 2) has been observed in the 1800MHz and 2100MHz bands, not in the 3.5GHz and 28GHz bands, in which the PLE is practically equal to 2 (free space). Finally, the analysis of the polarization reveals that the standard deviation of the measured values with respect to the values obtained from the models is greater for horizontal than vertical polarization in the 1800MHz and 2100MHz frequency bands., Este trabajo ha sido financiado por la Comunidad Autónoma de la Región de Murcia a través del proyecto 20804/PI/18 de la convocatoria de Ayudas a proyectos para el desarrollo de investigación científica y técnica por grupos competitivos, incluida en el Programa Regional de Fomento de la Investigación (Plan de Actuación 2019) de la Fundación Séneca, Agencia de Ciencia y Tecnología de la Región de Murcia y por el Ministerio de Economía y Competitividad MINECO (PID2019-107885GB-C33).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Multi-task Layout Analysis of Handwritten Musical Scores

  • Quirós, Lorenzo
  • Toselli, Alejandro Héctor|||0000-0001-6955-9249
  • Vidal, Enrique|||0000-0003-4579-5196
[EN] Document Layout Analysis (DLA) is a process that must be performed before attempting to recognize the content of handwritten musical scores by a modern automatic or semiautomatic system. DLA should provide the segmentation of the document image into semantically useful region types such as staff, lyrics, etc. In this paper we extend our previous work for DLA of handwritten text documents to also address complex handwritten music scores. This system is able to perform region segmentation, region classification and baseline detection in an integrated manner. Several experiments were performed in two different datasets in order to validate this approach and assess it in different scenarios. Results show high accuracy in such complex manuscripts and very competent computational time, which is a good indicator of the scalability of the method for very large collections., This work was partially supported by the Universitat Politecnica de Valencia under grant FPI-420II/899, a 2017-2018 Digital Humanities research grant of the BBVA Foundation for the project Carabela, the History Of Medieval Europe (HOME) project (Ref.: PCI2018-093122) and through the EU project READ (Horizon-2020 program, grant Ref. 674943). NVIDIA Corporation kindly donated the Titan X GPU used for this research.