Pasar al contenido principal

SISTEMAS DE ANTENAS PARA COMUNICACIONES INTEGRADAS

PID2022-136869NB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 32
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

M-Port rotationally symmetric antennas for advanced MIMO applications

  • Aldana Alonso, Rubén
  • Molins Benlliure, Jaime
  • Akazzim, Youness|||0000-0002-7957-4044
  • Llanga Vargas, Anibal
  • Jofre Cruanyes, Marc|||0000-0002-8912-6595
  • Cabedo Fabrés, Marta
  • Antonino Daviu, Eva
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Ferrando Bataller, Miguel
  • Jofre Roca, Lluís|||0000-0002-0547-901X
Multiple-input multiple-output (MIMO) technology has emerged as a highly promising solution for wireless communication, offering an opportunity to overcome the limitations of traffic capacity in high-speed broadband wireless network access. By utilizing multiple antennas at both the transmitting and receiving Sub-6GHz ends, the MIMO system enhances the efficiency and performance of wireless communication systems [1]. This work presents a comparison of the performance of two families of M-Rotationally Symmetrical MIMO antenna design approaches one based on the Magneto Electric (ME) dipole antenna and a second one based on the Circular Cavity principle intended for their use into advanced MIMO applications like Orthogonal Angular Momentum (OAM) and high capacity channels. A comparison of the relevant performance parameters in terms of frequency bandwidth (both input impedance 𝑺𝒊𝒊 and inter-port isolation 𝑺𝒊j) and radiation pattern are presented for the two Sub-6GHz prototypes., This work was financially supported by PDR-20142022/56-30157-2021-2A grant of the Generalitat de Catalunya and by CICYT PID2019-107885GB-C31, PID2019107885GB-C32, PID2022-136869NB-C31, PID2022136869NB-C33, and Prueba de Concepto PDC2022, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Microwave resonant wireless sensor for enhanced particle detection in microfluidic channels

  • Ataa-Allah, Houda
  • Ataa Allah, Fatima
  • Palacios Arias, César Augusto|||0000-0003-1298-8434
  • Aznabet, Mariem
  • El mrabet, Otman
  • Jofre Cruanyes, Marc|||0000-0002-8912-6595
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Jofre Roca, Lluís|||0000-0002-0547-901X
This paper presents a highly sensitive microwave sensor for bioparticle detection, designed around a ring-gap resonator integrated with a microfluidic channel. The sensor’s structure is optimized to enhance electric field confinement, improving its sensitivity to dielectric variations. Experimental validation using commercial microbeads as bioparticle models demonstrates clear resonance shifts, confirming the sensor’s capability for precise detection of particles up to 5 µm. These results highlight the potential of the proposed approach for realtime, label-free biosensing applications, offering a promising tool for biomedical diagnostics and analytical chemistry., This work was supported in part by the Generalitat de Catalunya and European Regional Development Fund (FEDER) under Grant PDR-2014-2022/56-30157-2021-2A, Grant 2021 SGR 01415 Q0818003F, and Grant Metropolis PLEC2021-007609; in part by the Agencia Estatal de Investigación, Spain, under Grant CICYT PID2019- 107885GBC31, Grant PID2022-136869NB-C31, and Grant Prueba de Concepto PDC2022-133091-I00; and in part by the Next Generation EU. Additionally, this work is supported by the CNRST as part of the ”PhD-Associate Scholarship – PASS” Program., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

OAM antennas for NLOS communications

  • Moriones Galve, Pau
  • Aldana Alonso, Rubén
  • Jofre Cruanyes, Marc|||0000-0002-8912-6595
  • Molina García-Pardo, José María
  • Pascual García, Juan
  • Ferrando Bataller, Miguel
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Jofre Roca, Lluís|||0000-0002-0547-901X
EM waves carrying orbital angular momentum (OAM) have been investigated in relation to their generation and transmission, with increasing interest in their usage and integration into modern communication systems. In the radio domain, the employment of a uniform circular array (UCA) featuring a consistent phase shift between neighboring elements is the most common technique employed in the literature to generate OAM carrying waves. Although offering an understandable solution, the consistent phase shift may not guarantee pure OAM generation and isolation between the different modes when interested on capacity increase with orthogonal multimodal solutions. In this work, the orientation of the elements in the antenna array is reviewed concerning collinear and radial arrangements of its elements, briefly analyzing the generation and transmission performance of different OAM eigenmodes, prioritizing short-range communication use cases. With respect to the latter, this report also addresses considerations about the performance evaluation of different OAM modes in the absence of clear LOS visibility under the aforementioned geometries., Grants PDR-2014-2022/56-30157-2021-2A, 2021 SGR 01415 Q0818003F, Metropolis PLEC2021-007609, PID2022-136869NB-C31, and PDC2022-133091-I00, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Hierarchical discretization of the electric field integral equation for the scattering analysis of nonconformal meshes

  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
The scattering analysis with the Electric-Field Integral Equation of perfectly conducting objects by the Method of Moments has been traditionally carried out with Galerkin divergence-conforming schemes. These implementations are numerically convenient since the dominant Kernel contributions in near-field impedance computation become weakly singular. On the other hand, the divergence-conforming sets of basis functions enforce the continuity of the normal component of the expanded current or tested electric field through the edges arising from the discretization, which restricts the analysis to conformal meshes, where adjacent facets must have a single edge in common. In practice, this hampers the agile and versatile design of complex structures, which very often need to be modelled through the interconnection of independent meshes. In this paper, we introduce a new discretization of the Electric-Field Integral Equation that relies on the expansion of the current through a hierarchical rearrangement of the monopolar-RWG expansion of the current (discontinuous at edges) and the volumetric/surface testing of the tangential/normal electric-field components. We show with RCS-results the accuracy of the proposed scheme in the analysis of several perfectly conducting objects, either conformally or nonconformally meshed., This work was supported in part by MICIU/AEI/ 10.13039/501100011033/FEDER, UE, under Projects PID2020-118410RB-C21, PID2022-136869NB-C31 and PID2023-146245OB-C21., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Agrupaciones cilíndricas en la banda de UHF para lectores de RFID

  • Ortiz Cruz, A.
  • Ferrando Bataller, Miquel
  • Jofre Roca, Lluís|||0000-0002-0547-901X
  • Molina García-Pardo, José María
This paper presents the design and evaluation of a cylindrical antenna array for UHF RFID readers, compatible with ETSI, FCC, and 2,45 GHz WiFi bands. The array is composed of 12 ultra-wideband (UWB) monopole antennas arranged in a 6×2 configuration. A U-shaped ground plane is introduced to enhance directivity while maintaining a wide bandwidth. The unit cell, fabricated on an FR-4 substrate, was optimized and replicated to form the full array. Full-wave simulations in CST Studio Suite confirm impedance matching and mutual coupling reduction. The array achieves a bandwidth of 37.9 per cent from 800 MHz to 1,15 GHz, with mutual coupling levels below -15 dB across the RFID operating bands. Radiation pattern control is demonstrated by exciting different ports, with directivity values up to 6,87 dB and total efficiency of-0,55 dB. These results validate the array’s suitability for robust and flexible RFID tag detection in complex electromagnetic environments., Este proyecto ha sido financiado por el Ministerio Español de Ciencia e Innovación en el proyecto coordinado PID2022- 136869NB-C33, C31,C32 y por la Generalitat Valenciana en el proyecto MFA/2022/056., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Precision time protocol synchronization analysis for single and coincidence qubit detection in quantum networks

  • Jofre Cruanyes, Marc|||0000-0002-8912-6595
  • Saigi, Ferran
  • Rincón Rivera, David|||0000-0003-1294-3842
2025 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The combination of Quantum and Telecommunications networks, offering unparalleled quantum correlation-based capabilities and making it an ideal choice for certain critical applications, requires precise time synchronization across network nodes. This work analytically and experimentally assessed the application of the IEEE 1588 Precision Time Protocol in achieving time synchronization within quantum networks. As results, operating at a repetition rate of 5MHz, the overall time synchronization precision is 65ns for single-qubit detection and 100ns for double-fold coincidence measurements. Correspondingly, the experimental results highlight the role of time-synchronization precision protocols in multi-node quantum networks and also provide insights for further developments for scalable quantum network infrastructure., This work was financially supported by PID2022-137329OB-C41 and PID2022-136869NB-C31 (MCIN / AEI / 10.13039 / 501100011033 / FEDER, UE), CNS2024-154600, PDC2022-133091-I00, grants of the Agencia Estatal de Investigaci´ on (Spain), Catalan Government University and Research Aid Management Agency (AGAUR) with Research Group grant 2021 SGR 01046, and ALECTORS 2024 grant from Universitat Polit` ecnica de Catalunya- BarcelonaTech (UPC).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Microwave monitoring of Parkinson disease using a realistic human head model

  • Akazzim, Youness|||0000-0002-7957-4044
  • Gugliermino, Martina
  • Rodríguez Duarte, David Orlando
  • Tobón Vásquez, Jorge Alberto
  • Vipiana, Francesca
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Jofre Roca, Lluís|||0000-0002-0547-901X
Parkinson's disease (PD) is a widespread neurode-generative disorder characterized by the loss of dopaminergic neurons from the substantia nigra, causing bradykinesia, tremors, rigidity, and postural instability. In this paper, we present a differential microwave imaging study (MWI) for early-stage PD monitoring that uses the dielectric properties of the basal ganglia, particularly the thalamus. The simulations are carried out using two scenarios: one is based on studying the sensitivity of a realistic human head model. The other is the study of differential microwave imaging to monitor the PD based on the dopamine level changes in the basal ganglia. The MWI system contains 24 printed flexible antennas with a custom-made matching medium covering the head model. The obtained results demonstrate that small variations in dielectric properties within the human head, in particular the thalamus, can be detected, which can be used to monitor Parkinson's disease in a very early stage., This work was financially supported in part by CICYT PID2019-107885GB-C31, PID2022-136869NB-C31, 2021 SGR 01415, Metropolis PLEC2021-007609, (FI-SDUR)(2021 FISDU 00195), PDR-2014-2022/56-30157-2021-2 A grant of the Generalitat de Catalunya, and Prueba de Concepto PDC2022-133091-I00 grants of the Ministerio de Ciencia, Innovacion y Universidades (Spain). This work was supported in part by the project PON Research and Innovation “Microwave Imaging and Detection powered by Artificial Intelligence for Medical and Industrial Applications (DM 1062/21)”, funded by MUR. It was carried out partially within the Agritech National Research Center, funded by the Next-Generation EU (PNRR, Missione 4, Componente 2, Investimento 1.4, D.D. 1032 17/06/2022, CN00000022., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Simple randomized strategies for low-rank matrix compression

  • López Menchón, Héctor|||0000-0001-5776-1423
  • Molina Burgués, Robert|||0009-0005-1314-3742
  • Heldring, Alexander|||0000-0003-2011-2096
  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
We propose a randomized Pseudo Skeleton (or CUR) approximation method to compress the H-matrices of linear systems that arise in the discretization of integral equations in electromagnetic scattering. This method is essentially the Matrix Decomposition Algorithm (MDA) of Michielssen and Boag (1994) with equivalent basis and testing functions equal to a random subset of the original ones. It is highly parellelizable and well suited for fine-granularity architectures as GPUs. As the Adaptive Cross Approximation (ACA), CUR is purely algebraic. The method is tested with standard cases to assess its quality and efficiency., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects PID2019-107885GBC31 / AEI / 10.13039/501100011033, PID2022-136869NBC31 / AEI / 10.13039/501100011033, PID2020-113832RBC21 / AEI / 10.13039/501100011033 and PID-2020-118410RB-C21 / AEI / 10.13039/501100011033, PDC2022-133091-I00 / AEI / 10.13039/501100011033, and Catalan Research Group 2017 SGR 219 and grant 2021 FI B2 00096., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Point-to-multipoint wireless communication at 100 GHz with a photonic switched-beam transmitter

  • Nellen, Simon
  • Schwanke, Garrit
  • Vega Piña, Sara|||0000-0002-4853-7929
  • Stiewe, Oliver
  • Lauck, Sebastian
  • Deumer, Milan
  • Elschner, Robert
  • Schubert, Colija
  • Freund, Ronald
  • Santos Blanco, M. Concepción|||0000-0002-5103-5356
  • Schell, Martin
  • Kohlhaas, Robert B.
Photonic transmitters are a promising approach for future wireless backhauling due to their high bandwidth and compatibility with fiber-optical networks. Additionally, photonic integration allows to create complex structures, e.g. antenna arrays, on a low-footprint chip or chiplets. So far, however, mainly fixed point-to-point links are demonstrated, and point-to-multipoint concepts come with increased effort, e.g. controlling numerous phase shifters to drive optical phased arrays. Our beam-switching approach demonstrates a multi-directional sub-THz transmitter with low operation effort. In a proof-of-concept experiment, we demonstrate 6.4 Gbps net data rate across an angular coverage of 85° in the W-band, specifically at 100 GHz., This work was partly funded by the Horizon Europe Programme project TERA6G under Grant 101096949 and the BMBF (Bundesministerium für Bildung und Forschung) project 6G-ADLANTIK under Grant 16KISK148. This work was partly funded by the Horizon Europe research and innovation program under the Marie Skłodowska-Curie grant agreement No. 101073265 (EWOC), by the Spanish Ministerio de Ciencia e Innovación (MICIN) under projects PID2022-137754OB (CONFLOC) and PID2022-136869NB-C31 (MCIN/AEI/ 10.13039 / 501100011033/FEDER, UE), and by the Catalan Goverment University and Research Aid Management Agency (AGAUR) with Research Group grant 2021 SGR 01415., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Array antenna enhanced with Gutman lens for small scanning angles

  • Molina Burgués, Robert|||0009-0005-1314-3742
  • Jofre Roca, Lluís|||0000-0002-0547-901X
  • Vico Bondia, Felipe
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
  • Ferrando Bataller, Miguel
  • Romeu Robert, Jordi|||0000-0003-0197-5961
This paper explores the adaptation of Gutman lenses for array-based feeding systems to overcome the limitations of single-radiator feeding systems, including limited radiated power and restricted beam steering flexibility. The adaptation is achieved through two new methodologies, both based on the analysis of the electric field at the focal plane of the lens. This work presents a proof of concept for these methodologies, providing simulation results and performance evaluations to assess their effectiveness in improving directivity while also examining the impact of lens size on system performance and limitations. Adapting the lens for array-based feeding offers significant benefits for applications such as fixed point-to-point communication systems, where near-broadside scanning and increased radiated power are crucial for mitigating external factors like weather and interference., This work was funded by the Ministerio de Ciencia e Innovacion (MICINN) and the Fondo Social Europeo Plus (FSE+) under project PID2022-136869NB-C31 (MCIN/AEI/10.13039/501100011033/FEDER,UE)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Analysis of dielectric material constraints imposed in lens design

  • Molina Burgués, Robert|||0009-0005-1314-3742
  • Jofre Roca, Lluís|||0000-0002-0547-901X
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
  • Romeu Robert, Jordi|||0000-0003-0197-5961
This work presents a parametric analysis of how dielectric properties from specific materials influence traditional lens design, focusing on their impact on directivity, dielectric losses, gain, lens dimensions and operational frequency. Through this analysis, visual guidance is provided to assist in selecting dielectric materials suited to specific applications and constraints. Additionally, we conduct a focused analysis on a selection of real materials, chosen for their dielectric characteristics suited to typical lens antenna applications. In both analyses, we emphasize a key design trade-off that defines the achievable performance: while higher dielectric constants enhance antenna directivity, this benefit may be negated by increased dielectric losses., This work was funded by the Ministerio de Ciencia e Innovacion (MICINN) and the Fondo Social Europeo Plus (FSE+) under project PID2022-136869NB-C31., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Resonance-based microwave monitoring of live/dead bacteria in a microfluidic channel

  • Ataa-Allah, Houda
  • Aznabet, Mariem
  • Palacios Arias, César Augusto|||0000-0003-1298-8434
  • Akazzim, Youness|||0000-0002-7957-4044
  • El mrabet, Otman
  • Jofre Cruanyes, Marc|||0000-0002-8912-6595
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Jofre Roca, Lluís|||0000-0002-0547-901X
In this work, we have studied a highly sensitive microwave sensor for the detection of Escherichia coli (E. coli) bacteria at the single-cell level. The proposed system integrates a microwave sensor with a microfluidic channel for bacteria flow control. The microwave sensor is based on a planar microwave annular ring resonator working around 5GHz. Inside the channel, E. coli bacteria have been modeled using dielectric characteristics present in state-of-the-art literature. To enhance field confinement and achieve the highest electric field strength we have introduced two 50um gaps into the resonator. This approach holds great potential for different applications, including food safety control, healthcare diagnosis, and environmental monitoring, where the ability to detect a single E. coli cell is paramount., This work was financially supported in part by ID2019- 107885GBC31, PID2022-136869NB-C31, 2021 SGR 01415, Metropolis PLEC2021-007609, (FI-SDUR) (2021 FISDU 00195), PDR-2014- 2022/56-30157-2021-2 Generalitat de Catalunya, and Prueba de Concepto PDC2022-133091-I00 Ministerio de Ciencia, Innovacion y Universidades (Spain)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Magnetoelectric dipole antenna extending NLOS short-distance vehicular communication with orbital angular momentum modes

  • Jofre Cruanyes, Marc|||0000-0002-8912-6595
  • Akazzim, Youness|||0000-0002-7957-4044
  • Towfiq, Asaduzzaman
  • Cetiner, Bedri Artug
  • Blanch Boris, Sebastián|||0000-0002-8757-583X
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Jofre Roca, Lluís|||0000-0002-0547-901X
The ability to utilize resources to meet the need of growing diversity in services and user behavior marks the future of cognitive wireless communication systems. Cognitive wireless technologies for vehicular communications, in combination with Orbital Angular Momentum (OAM) modes aim at extending direct Non-Line-Of-Sight (NLOS) short-distance communications for smart mobility. In this regard, OAM antennas need to be developed to support these technologies. To this end, here we describe a compact antenna supporting the first OAM modes. Also, the antenna properties are discussed and are numerically and experimentally validated for OAM modes of l=±1 . Particularly, for the considered OAM modes, the antenna achieves more than 500 MHz operation bandwidth at the frequency of operation of 3.5 GHz. Also, for l=±1 OAM modes, the null beamwidth aligns precisely with the anticipated dimensions theoretically computed., This work was financially supported by PDR-2014-2022/56-30157-2021-2A grant of the Generalitat de Catalunya and by CICYT PID2019-107885GB-C31, PID2022-136869NB-C31 and Prueba de Concepto PDC2022-133091-I00 and Metropolis PLEC2021-007609 grants of the Ministerio de Ciencia, Inno-vación y Universidades (Spain).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Hierarchical grid-robust discretization of the electric-field integral equation by the method of moments

  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
Traditionally, the scattering analysis with the Electric-Field Integral Equation of perfectly conducting objects has been carried out through divergence-conforming schemes of discretization, which are numerically convenient because the dominant Kernel contributions are weakly singular. Since the divergence-conforming sets enforce by definition the continuity of the normal component of the expanded magnitudes through the edges arising from the discretization, the analysis can only be applied to objects conformally meshed, with adjacent facets sharing a single edge. In practice, this hampers the flexible analysis of complex structures, which very often need to be modelled through the interconnection of independent meshes. In this paper, we introduce two novel schemes of discretization of the Electric-Field Integral Equation that are based on the expansion of the current through a hierarchical rearrangement of the monopolar-RWG expansion of the current (fully discontinuous at edges). Both schemes manage the zeroth-order scheme of testing in the same manner. The first-order testing scheme, though, is implemented differently in both cases, either through volumetric or through surface testing integrals. We show with RCS-results the accuracy of the proposed schemes in the analysis of a sharp-edged perfectly conducting object., This work was supported in part by MICIU/AEI/10.13039/501100011033/FEDER, UE, under Projects PID2020-118410RB-C21, PID2022-136869NB-C31 and PID2023-146245OB-C21., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

SAID fiber-antenna radio head at 50 GHz

  • Vega Piña, Sara|||0000-0002-4853-7929
  • Sadki, Youssra
  • Santos Blanco, M. Concepción|||0000-0002-5103-5356
  • Lauck, Sebastian
  • Schwanke, Garrit
  • Nellen, Simon
  • Kohlhaas, Robert B.
  • Jofre Roca, Lluís|||0000-0002-0547-901X
Planar transmitting antennas with a direct photodiode (PD) connection for 50 GHz fiber-fed signal radiation are presented. The short asymmetrical inductive dipole (SAID) antenna enables independent adjustment of either the real and imaginary part of the input impedance through specific geometrical dimensions, allowing for flexible conjugate impedance match with the PD, maximizing the radiated power. Measured results confirm excellent antenna efficiency and radiation patterns, demonstrating the effectiveness of the approach., This work was funded by the European Union’s Horizon Europe research and innovation program under the Marie Skłodowska-Curie grant agreement No. 101073265 (EWOC), by the Spanish Ministerio de Ciencia e Innovación (MICIN) projects PID2022-137754OB (CONFLOC) and PID2022-136869NB-C31 (MCIN/AEI/ 10.13039 / 501100011033/FEDER, UE), and by the Catalan Goverment University and Research Aid Management Agency (AGAUR) with Research Group grant 2021 SGR 01415 and with pre-doctoral grant 2021 FISDU 00094 to the first author., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Efficient analysis of wide monopole structures

  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Calvo Larruy, Antonio
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The scattering analysis with the Electric-Field Integral Equation of perfectly conducting plates has been traditionally carried out through the thin-plate approximation, which models the plate as an open surface, thereby reducing drastically the number of unknowns. This approach exhibits good EM scattering accuracy under non-grazing planewave incidence and for small thicknesses, which suffices in many practical applications. Recently, the so-called thick-surface approach has shown improved accuracy, with moderately small computational overhead, in cases where the thin-surface approach fails. In this paper, we extend such scheme to the scattering analysis of plates vertically oriented with respect to an infinite perfectly conducting ground plane. We show with RCS results that the formulation resulting from the combination of the Image theory and the original free-space thick-surface scheme allows also the accurate analysis of monopole-like structures, with finite thickness, in cases where the original thin-plate approach fails., This work was supported by the spanish Agencia Estatal de Investigación (AEI) under the projects PID2020-118410RB-C21/AEI/10.13039/501100011033 and PID2022-136869NB-C31/AEI /10.13039/501100011033.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Hierarchical discretization of the electric field integral equation for the scattering analysis of nonconformal meshes

  • Úbeda Farré, Eduard
  • Rius Casals, Juan Manuel
The scattering analysis with the Electric-Field Integral Equation of perfectly conducting objects by the Method of Moments has been traditionally carried out with Galerkin divergence-conforming schemes. These implementations are numerically convenient since the dominant Kernel contributions in near-field impedance computation become weakly singular. On the other hand, the divergence-conforming sets of basis functions enforce the continuity of the normal component of the expanded current or tested electric field through the edges arising from the discretization, which restricts the analysis to conformal meshes, where adjacent facets must have a single edge in common. In practice, this hampers the agile and versatile design of complex structures, which very often need to be modelled through the interconnection of independent meshes. In this paper, we introduce a new discretization of the Electric-Field Integral Equation that relies on the expansion of the current through a hierarchical rearrangement of the monopolar-RWG expansion of the current (discontinuous at edges) and the volumetric/surface testing of the tangential/normal electric-field components. We show with RCS-results the accuracy of the proposed scheme in the analysis of several perfectly conducting objects, either conformally or nonconformally meshed., This work was supported in part by MICIU/AEI/ 10.13039/501100011033/FEDER, UE, under Projects PID2020-118410RB-C21, PID2022-136869NB-C31 and PID2023-146245OB-C21., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Simple randomized strategies for low-rank matrix compression

  • López Menchón, Héctor
  • Molina Burgués, Robert
  • Heldring, Alexander
  • Úbeda Farré, Eduard
  • Rius Casals, Juan Manuel
We propose a randomized Pseudo Skeleton (or CUR) approximation method to compress the H-matrices of linear systems that arise in the discretization of integral equations in electromagnetic scattering. This method is essentially the Matrix Decomposition Algorithm (MDA) of Michielssen and Boag (1994) with equivalent basis and testing functions equal to a random subset of the original ones. It is highly parellelizable and well suited for fine-granularity architectures as GPUs. As the Adaptive Cross Approximation (ACA), CUR is purely algebraic. The method is tested with standard cases to assess its quality and efficiency., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects PID2019-107885GBC31 / AEI / 10.13039/501100011033, PID2022-136869NBC31 / AEI / 10.13039/501100011033, PID2020-113832RBC21 / AEI / 10.13039/501100011033 and PID-2020-118410RB-C21 / AEI / 10.13039/501100011033, PDC2022-133091-I00 / AEI / 10.13039/501100011033, and Catalan Research Group 2017 SGR 219 and grant 2021 FI B2 00096., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Point-to-multipoint wireless communication at 100 GHz with a photonic switched-beam transmitter

  • Nellen, Simon
  • Schwanke, Garrit
  • Vega Piña, Sara
  • Stiewe, Oliver
  • Lauck, Sebastian
  • Deumer, Milan
  • Elschner, Robert
  • Schubert, Colija
  • Freund, Ronald
  • Santos Blanco, M. Concepción
  • Schell, Martin
  • Kohlhaas, Robert B.
Photonic transmitters are a promising approach for future wireless backhauling due to their high bandwidth and compatibility with fiber-optical networks. Additionally, photonic integration allows to create complex structures, e.g. antenna arrays, on a low-footprint chip or chiplets. So far, however, mainly fixed point-to-point links are demonstrated, and point-to-multipoint concepts come with increased effort, e.g. controlling numerous phase shifters to drive optical phased arrays. Our beam-switching approach demonstrates a multi-directional sub-THz transmitter with low operation effort. In a proof-of-concept experiment, we demonstrate 6.4 Gbps net data rate across an angular coverage of 85° in the W-band, specifically at 100 GHz., This work was partly funded by the Horizon Europe Programme project TERA6G under Grant 101096949 and the BMBF (Bundesministerium für Bildung und Forschung) project 6G-ADLANTIK under Grant 16KISK148. This work was partly funded by the Horizon Europe research and innovation program under the Marie Skłodowska-Curie grant agreement No. 101073265 (EWOC), by the Spanish Ministerio de Ciencia e Innovación (MICIN) under projects PID2022-137754OB (CONFLOC) and PID2022-136869NB-C31 (MCIN/AEI/ 10.13039 / 501100011033/FEDER, UE), and by the Catalan Goverment University and Research Aid Management Agency (AGAUR) with Research Group grant 2021 SGR 01415., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

SAID fiber-antenna radio head at 50 GHz

  • Vega Piña, Sara
  • Sadki, Youssra
  • Santos Blanco, M. Concepción
  • Lauck, Sebastian
  • Schwanke, Garrit
  • Nellen, Simon
  • Kohlhaas, Robert B.
  • Jofre Roca, Lluís
Planar transmitting antennas with a direct photodiode (PD) connection for 50 GHz fiber-fed signal radiation are presented. The short asymmetrical inductive dipole (SAID) antenna enables independent adjustment of either the real and imaginary part of the input impedance through specific geometrical dimensions, allowing for flexible conjugate impedance match with the PD, maximizing the radiated power. Measured results confirm excellent antenna efficiency and radiation patterns, demonstrating the effectiveness of the approach., This work was funded by the European Union’s Horizon Europe research and innovation program under the Marie Skłodowska-Curie grant agreement No. 101073265 (EWOC), by the Spanish Ministerio de Ciencia e Innovación (MICIN) projects PID2022-137754OB (CONFLOC) and PID2022-136869NB-C31 (MCIN/AEI/ 10.13039 / 501100011033/FEDER, UE), and by the Catalan Goverment University and Research Aid Management Agency (AGAUR) with Research Group grant 2021 SGR 01415 and with pre-doctoral grant 2021 FISDU 00094 to the first author., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Agrupaciones cilíndricas en la banda de UHF para lectores de RFID

  • Ortiz Cruz, A.
  • Ferrando Bataller, Miquel
  • Jofre Roca, Lluís
  • Molina García-Pardo, José María
This paper presents the design and evaluation of a cylindrical antenna array for UHF RFID readers, compatible with ETSI, FCC, and 2,45 GHz WiFi bands. The array is composed of 12 ultra-wideband (UWB) monopole antennas arranged in a 6×2 configuration. A U-shaped ground plane is introduced to enhance directivity while maintaining a wide bandwidth. The unit cell, fabricated on an FR-4 substrate, was optimized and replicated to form the full array. Full-wave simulations in CST Studio Suite confirm impedance matching and mutual coupling reduction. The array achieves a bandwidth of 37.9 per cent from 800 MHz to 1,15 GHz, with mutual coupling levels below -15 dB across the RFID operating bands. Radiation pattern control is demonstrated by exciting different ports, with directivity values up to 6,87 dB and total efficiency of-0,55 dB. These results validate the array’s suitability for robust and flexible RFID tag detection in complex electromagnetic environments., Este proyecto ha sido financiado por el Ministerio Español de Ciencia e Innovación en el proyecto coordinado PID2022- 136869NB-C33, C31,C32 y por la Generalitat Valenciana en el proyecto MFA/2022/056., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Analysis of dielectric material constraints imposed in lens design

  • Molina Burgués, Robert
  • Jofre Roca, Lluís
  • Rius Casals, Juan Manuel
  • Romeu Robert, Jordi
This work presents a parametric analysis of how dielectric properties from specific materials influence traditional lens design, focusing on their impact on directivity, dielectric losses, gain, lens dimensions and operational frequency. Through this analysis, visual guidance is provided to assist in selecting dielectric materials suited to specific applications and constraints. Additionally, we conduct a focused analysis on a selection of real materials, chosen for their dielectric characteristics suited to typical lens antenna applications. In both analyses, we emphasize a key design trade-off that defines the achievable performance: while higher dielectric constants enhance antenna directivity, this benefit may be negated by increased dielectric losses., This work was funded by the Ministerio de Ciencia e Innovacion (MICINN) and the Fondo Social Europeo Plus (FSE+) under project PID2022-136869NB-C31., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Microwave monitoring of Parkinson disease using a realistic human head model

  • Akazzim, Youness
  • Gugliermino, Martina
  • Rodríguez Duarte, David Orlando
  • Tobón Vásquez, Jorge Alberto
  • Vipiana, Francesca
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
Parkinson's disease (PD) is a widespread neurode-generative disorder characterized by the loss of dopaminergic neurons from the substantia nigra, causing bradykinesia, tremors, rigidity, and postural instability. In this paper, we present a differential microwave imaging study (MWI) for early-stage PD monitoring that uses the dielectric properties of the basal ganglia, particularly the thalamus. The simulations are carried out using two scenarios: one is based on studying the sensitivity of a realistic human head model. The other is the study of differential microwave imaging to monitor the PD based on the dopamine level changes in the basal ganglia. The MWI system contains 24 printed flexible antennas with a custom-made matching medium covering the head model. The obtained results demonstrate that small variations in dielectric properties within the human head, in particular the thalamus, can be detected, which can be used to monitor Parkinson's disease in a very early stage., This work was financially supported in part by CICYT PID2019-107885GB-C31, PID2022-136869NB-C31, 2021 SGR 01415, Metropolis PLEC2021-007609, (FI-SDUR)(2021 FISDU 00195), PDR-2014-2022/56-30157-2021-2 A grant of the Generalitat de Catalunya, and Prueba de Concepto PDC2022-133091-I00 grants of the Ministerio de Ciencia, Innovacion y Universidades (Spain). This work was supported in part by the project PON Research and Innovation “Microwave Imaging and Detection powered by Artificial Intelligence for Medical and Industrial Applications (DM 1062/21)”, funded by MUR. It was carried out partially within the Agritech National Research Center, funded by the Next-Generation EU (PNRR, Missione 4, Componente 2, Investimento 1.4, D.D. 1032 17/06/2022, CN00000022., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Magnetoelectric dipole antenna extending NLOS short-distance vehicular communication with orbital angular momentum modes

  • Jofre Cruanyes, Marc
  • Akazzim, Youness
  • Towfiq, Asaduzzaman
  • Cetiner, Bedri Artug
  • Blanch Boris, Sebastián
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
The ability to utilize resources to meet the need of growing diversity in services and user behavior marks the future of cognitive wireless communication systems. Cognitive wireless technologies for vehicular communications, in combination with Orbital Angular Momentum (OAM) modes aim at extending direct Non-Line-Of-Sight (NLOS) short-distance communications for smart mobility. In this regard, OAM antennas need to be developed to support these technologies. To this end, here we describe a compact antenna supporting the first OAM modes. Also, the antenna properties are discussed and are numerically and experimentally validated for OAM modes of l=±1 . Particularly, for the considered OAM modes, the antenna achieves more than 500 MHz operation bandwidth at the frequency of operation of 3.5 GHz. Also, for l=±1 OAM modes, the null beamwidth aligns precisely with the anticipated dimensions theoretically computed., This work was financially supported by PDR-2014-2022/56-30157-2021-2A grant of the Generalitat de Catalunya and by CICYT PID2019-107885GB-C31, PID2022-136869NB-C31 and Prueba de Concepto PDC2022-133091-I00 and Metropolis PLEC2021-007609 grants of the Ministerio de Ciencia, Inno-vación y Universidades (Spain)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

M-Port rotationally symmetric antennas for advanced MIMO applications

  • Aldana Alonso, Rubén
  • Molins Benlliure, Jaime
  • Akazzim, Youness
  • Llanga Vargas, Anibal
  • Jofre Cruanyes, Marc
  • Cabedo Fabrés, Marta
  • Antonino Daviu, Eva
  • Romeu Robert, Jordi
  • Ferrando Bataller, Miguel
  • Jofre Roca, Lluís
Multiple-input multiple-output (MIMO) technology has emerged as a highly promising solution for wireless communication, offering an opportunity to overcome the limitations of traffic capacity in high-speed broadband wireless network access. By utilizing multiple antennas at both the transmitting and receiving Sub-6GHz ends, the MIMO system enhances the efficiency and performance of wireless communication systems [1]. This work presents a comparison of the performance of two families of M-Rotationally Symmetrical MIMO antenna design approaches one based on the Magneto Electric (ME) dipole antenna and a second one based on the Circular Cavity principle intended for their use into advanced MIMO applications like Orthogonal Angular Momentum (OAM) and high capacity channels. A comparison of the relevant performance parameters in terms of frequency bandwidth (both input impedance 𝑺𝒊𝒊 and inter-port isolation 𝑺𝒊j) and radiation pattern are presented for the two Sub-6GHz prototypes., This work was financially supported by PDR-20142022/56-30157-2021-2A grant of the Generalitat de Catalunya and by CICYT PID2019-107885GB-C31, PID2019107885GB-C32, PID2022-136869NB-C31, PID2022136869NB-C33, and Prueba de Concepto PDC2022, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Microwave resonant wireless sensor for enhanced particle detection in microfluidic channels

  • Ataa-Allah, Houda
  • Ataa Allah, Fatima
  • Palacios Arias, César Augusto
  • Aznabet, Mariem
  • El mrabet, Otman
  • Jofre Cruanyes, Marc
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
This paper presents a highly sensitive microwave sensor for bioparticle detection, designed around a ring-gap resonator integrated with a microfluidic channel. The sensor’s structure is optimized to enhance electric field confinement, improving its sensitivity to dielectric variations. Experimental validation using commercial microbeads as bioparticle models demonstrates clear resonance shifts, confirming the sensor’s capability for precise detection of particles up to 5 µm. These results highlight the potential of the proposed approach for realtime, label-free biosensing applications, offering a promising tool for biomedical diagnostics and analytical chemistry., This work was supported in part by the Generalitat de Catalunya and European Regional Development Fund (FEDER) under Grant PDR-2014-2022/56-30157-2021-2A, Grant 2021 SGR 01415 Q0818003F, and Grant Metropolis PLEC2021-007609; in part by the Agencia Estatal de Investigación, Spain, under Grant CICYT PID2019- 107885GBC31, Grant PID2022-136869NB-C31, and Grant Prueba de Concepto PDC2022-133091-I00; and in part by the Next Generation EU. Additionally, this work is supported by the CNRST as part of the ”PhD-Associate Scholarship – PASS” Program., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Efficient analysis of wide monopole structures

  • Úbeda Farré, Eduard
  • Calvo Larruy, Antonio
  • Rius Casals, Juan Manuel
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The scattering analysis with the Electric-Field Integral Equation of perfectly conducting plates has been traditionally carried out through the thin-plate approximation, which models the plate as an open surface, thereby reducing drastically the number of unknowns. This approach exhibits good EM scattering accuracy under non-grazing planewave incidence and for small thicknesses, which suffices in many practical applications. Recently, the so-called thick-surface approach has shown improved accuracy, with moderately small computational overhead, in cases where the thin-surface approach fails. In this paper, we extend such scheme to the scattering analysis of plates vertically oriented with respect to an infinite perfectly conducting ground plane. We show with RCS results that the formulation resulting from the combination of the Image theory and the original free-space thick-surface scheme allows also the accurate analysis of monopole-like structures, with finite thickness, in cases where the original thin-plate approach fails., This work was supported by the spanish Agencia Estatal de Investigación (AEI) under the projects PID2020-118410RB-C21/AEI/10.13039/501100011033 and PID2022-136869NB-C31/AEI /10.13039/501100011033., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Hierarchical grid-robust discretization of the electric-field integral equation by the method of moments

  • Úbeda Farré, Eduard
  • Rius Casals, Juan Manuel
Traditionally, the scattering analysis with the Electric-Field Integral Equation of perfectly conducting objects has been carried out through divergence-conforming schemes of discretization, which are numerically convenient because the dominant Kernel contributions are weakly singular. Since the divergence-conforming sets enforce by definition the continuity of the normal component of the expanded magnitudes through the edges arising from the discretization, the analysis can only be applied to objects conformally meshed, with adjacent facets sharing a single edge. In practice, this hampers the flexible analysis of complex structures, which very often need to be modelled through the interconnection of independent meshes. In this paper, we introduce two novel schemes of discretization of the Electric-Field Integral Equation that are based on the expansion of the current through a hierarchical rearrangement of the monopolar-RWG expansion of the current (fully discontinuous at edges). Both schemes manage the zeroth-order scheme of testing in the same manner. The first-order testing scheme, though, is implemented differently in both cases, either through volumetric or through surface testing integrals. We show with RCS-results the accuracy of the proposed schemes in the analysis of a sharp-edged perfectly conducting object., This work was supported in part by MICIU/AEI/10.13039/501100011033/FEDER, UE, under Projects PID2020-118410RB-C21, PID2022-136869NB-C31 and PID2023-146245OB-C21., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Precision time protocol synchronization analysis for single and coincidence qubit detection in quantum networks

  • Jofre Cruanyes, Marc
  • Saigi, Ferran
  • Rincón Rivera, David
2025 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The combination of Quantum and Telecommunications networks, offering unparalleled quantum correlation-based capabilities and making it an ideal choice for certain critical applications, requires precise time synchronization across network nodes. This work analytically and experimentally assessed the application of the IEEE 1588 Precision Time Protocol in achieving time synchronization within quantum networks. As results, operating at a repetition rate of 5MHz, the overall time synchronization precision is 65ns for single-qubit detection and 100ns for double-fold coincidence measurements. Correspondingly, the experimental results highlight the role of time-synchronization precision protocols in multi-node quantum networks and also provide insights for further developments for scalable quantum network infrastructure., This work was financially supported by PID2022-137329OB-C41 and PID2022-136869NB-C31 (MCIN / AEI / 10.13039 / 501100011033 / FEDER, UE), CNS2024-154600, PDC2022-133091-I00, grants of the Agencia Estatal de Investigaci´ on (Spain), Catalan Government University and Research Aid Management Agency (AGAUR) with Research Group grant 2021 SGR 01046, and ALECTORS 2024 grant from Universitat Polit` ecnica de Catalunya- BarcelonaTech (UPC)., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

OAM antennas for NLOS communications

  • Moriones Galve, Pau
  • Aldana Alonso, Rubén
  • Jofre Cruanyes, Marc
  • Molina García-Pardo, José María
  • Pascual García, Juan
  • Ferrando Bataller, Miguel
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
EM waves carrying orbital angular momentum (OAM) have been investigated in relation to their generation and transmission, with increasing interest in their usage and integration into modern communication systems. In the radio domain, the employment of a uniform circular array (UCA) featuring a consistent phase shift between neighboring elements is the most common technique employed in the literature to generate OAM carrying waves. Although offering an understandable solution, the consistent phase shift may not guarantee pure OAM generation and isolation between the different modes when interested on capacity increase with orthogonal multimodal solutions. In this work, the orientation of the elements in the antenna array is reviewed concerning collinear and radial arrangements of its elements, briefly analyzing the generation and transmission performance of different OAM eigenmodes, prioritizing short-range communication use cases. With respect to the latter, this report also addresses considerations about the performance evaluation of different OAM modes in the absence of clear LOS visibility under the aforementioned geometries., Grants PDR-2014-2022/56-30157-2021-2A, 2021 SGR 01415 Q0818003F, Metropolis PLEC2021-007609, PID2022-136869NB-C31, and PDC2022-133091-I00, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Resonance-based microwave monitoring of live/dead bacteria in a microfluidic channel

  • Ataa-Allah, Houda
  • Aznabet, Mariem
  • Palacios Arias, César Augusto
  • Akazzim, Youness
  • El mrabet, Otman
  • Jofre Cruanyes, Marc
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
In this work, we have studied a highly sensitive microwave sensor for the detection of Escherichia coli (E. coli) bacteria at the single-cell level. The proposed system integrates a microwave sensor with a microfluidic channel for bacteria flow control. The microwave sensor is based on a planar microwave annular ring resonator working around 5GHz. Inside the channel, E. coli bacteria have been modeled using dielectric characteristics present in state-of-the-art literature. To enhance field confinement and achieve the highest electric field strength we have introduced two 50um gaps into the resonator. This approach holds great potential for different applications, including food safety control, healthcare diagnosis, and environmental monitoring, where the ability to detect a single E. coli cell is paramount., This work was financially supported in part by ID2019- 107885GBC31, PID2022-136869NB-C31, 2021 SGR 01415, Metropolis PLEC2021-007609, (FI-SDUR) (2021 FISDU 00195), PDR-2014- 2022/56-30157-2021-2 Generalitat de Catalunya, and Prueba de Concepto PDC2022-133091-I00 Ministerio de Ciencia, Innovacion y Universidades (Spain)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Array antenna enhanced with Gutman lens for small scanning angles

  • Molina Burgués, Robert
  • Jofre Roca, Lluís
  • Vico Bondia, Felipe
  • Rius Casals, Juan Manuel
  • Ferrando Bataller, Miguel
  • Romeu Robert, Jordi
This paper explores the adaptation of Gutman lenses for array-based feeding systems to overcome the limitations of single-radiator feeding systems, including limited radiated power and restricted beam steering flexibility. The adaptation is achieved through two new methodologies, both based on the analysis of the electric field at the focal plane of the lens. This work presents a proof of concept for these methodologies, providing simulation results and performance evaluations to assess their effectiveness in improving directivity while also examining the impact of lens size on system performance and limitations. Adapting the lens for array-based feeding offers significant benefits for applications such as fixed point-to-point communication systems, where near-broadside scanning and increased radiated power are crucial for mitigating external factors like weather and interference., This work was funded by the Ministerio de Ciencia e Innovacion (MICINN) and the Fondo Social Europeo Plus (FSE+) under project PID2022-136869NB-C31 (MCIN/AEI/10.13039/501100011033/FEDER,UE)., Peer Reviewed, Postprint (published version)