Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Vortex dynamics in nanofabricated chemical solution deposition high-temperature superconducting films

  • Palau, Anna
  • Rouco, Víctor
  • Luccas, Roberto F.
  • Obradors, Xavier
  • Puig Molina, Teresa
Artificial manipulation and control of vortex dynamics in YBa2Cu3O7 (YBCO) films have always been a complex issue, especially since high thermal excitations but also strong vortex pinning capabilities coexist in this material. Thus, artificial nanofabrication strategies able to generate competing effects with intrinsic microstructural defects need to be achieved. Lithography tools are widely used to create model systems with controlled pinning potentials in superconductors. However, these techniques easily disturb the optimal oxygen film doping in YBCO films and consequently the overall performances degrades. We have optimized the use of two different high-resolution nanolithography approaches, Focused Ion Beam Milling and Electron Beam Lithography, to artificially and locally modify the pinning landscape of YBCO films grown by chemical solution deposition (CSD). Three different nanofabricated systems will be discussed, which resulted in ideal structures to manipulate vortex dynamics in CSD-YBCO thin films with strong intrinsic pinning centers. In particular, we observed artificial granularity effects, nanowall pinning, and positive and negative rectification effects. We will report on our understanding of all these effects and potential expectations., This work has been supported by MINECO (MAT2014-51778-C2- 1R, MAT2011-28874-C02-01, Programa CONSOLIDER, CSD 2007-00041), Generalitat de Catalunya (2014-SGR-00753), European Union, FP7- EU-NMP-LA-2012-280432 EUROTAPES project and Cost Action MP1201. ICMAB acknowledges the Severo Ochoa Center of Excellence mention from MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Conjugated Polymers: Relationship Between Morphology and Optical Properties

  • Alonso Carmona, M. Isabel
  • Campoy Quiles, Mariano
In this Chapter we will start by briefly summarising the basic concepts of the electronic structure of conjugated polymers. This will enable the discussion of the relevant descriptions of the dielectric function. We will relate these descriptions to the model parameterisations which are used in advanced ellipsometric analysis of thin films such as those used in devices for organic photovoltaics (OPVs) and light emitting diodes (OLEDs). Amongst other things, such parametric descriptions are useful to deal with structural changes in conjugated polymer thin films. Once the models are presented, we will provide representative examples of the nexus between morphology and optical constants, and how the latter can be employed to infer aspects of the former. First, we will discuss how chain conformation affects the optical properties. Then, we will explain the anisotropic behaviour of conjugated polymer films due to their intrinsic molecular anisotropy and review different cases (f. i., oriented films or semicrystalline polymers). We will also describe structural changes that occur upon blending polymers with fullerenes and concomitant variations of the optical properties. Here we will focus on state of the art low band gap polymers mixed with fullerenes. Finally, real-time ellipsometric experiments in which these structure-property relationships can be exploited will be presented., The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through grant MAT2015-70850-P and the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Optical properties of semiconductors

  • Alonso Carmona, M. Isabel
  • Garriga Bacardi, Miquel
In this chapter we present basic concepts which are relevant to link the results obtained from ellipsometry data analysis with fundamental properties of semiconductors for photovoltaic applications. The linear optical properties of semiconductors are best discussed in terms of the relationship between the dielectric function ε and the band structure., The authors thank the Spanish Ministry of Economy and Competitiveness (MINECO) for funding through grants CSD2010-00044, MAT2015-70850-P, and the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Organic Solar Cells

  • Alonso Carmona, M. Isabel
  • Campoy Quiles, Mariano
Organic solar cells attract both scientific and economic interest due to their potential for clean and cost-effective photovoltaic energy conversion. Continuous evolution of this field relies on materials research, including synthesis of new compounds and fine control over film microstructure, as well as improved device architectures. In this context, spectroscopic ellipsometry is a helpful characterization tool, stretching over material preparation, device structure, and device modelling. This chapter will provide a general perspective of aspects that can be investigated by ellipsometry in these systems. The acquired insights enhance our capability to understand and model the optoelectronic properties of photovoltaic devices., The authors thank Ms. Andrea Pitillas help in the preparation of devices studied in Fig. 15.8 and the Spanish Ministry of Economy and Competitiveness for funding through grants MAT2012-37776, MAT2015-70850-P, and the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Organic-Inorganic Hybrid Perovskite Solar Cells

  • Fujiwara, Hiroyuki
  • Podraza, Nikolas J.
  • Alonso Carmona, M. Isabel
  • Kato, Masato
  • Ghimire, Kiran
  • Miyadera, Tetsuhiko
  • Chikamatsu, Masayuki
Quite high efficiencies exceeding 20% have been realized in solar cells incorporating organic-inorganic hybrid perovskites (APbX3), which have a unique structure with a center cation [A = CH3NH3+, HC(NH2) 2 + ] located within a PbX3− cage (X = I, Br, Cl). Superior characteristics of hybrid perovskite solar cells can be understood from the nature of optical transitions and the efficient carrier collection in the device. From these points of view, this chapter provides details on optical properties of various hybrid perovskite materials and carrier dynamics in the solar cells. In particular, based on the first-principles analyses of different perovskite materials, we present universal rules that allow the unified interpretation of the optical absorption phenomenon in APbX3 perovskites. The external quantum efficiency (EQE) analysis further reveals that high short-circuit current densities (>20 mA/cm2) observed in the perovskite solar cells originate from electric-field-assisted carrier collection and the suppressed optical losses in the devices. Although hybrid perovskites have quite favorable characteristics for solar cells, these materials exhibit rather intense phase change upon exposure to humid air. In this chapter, the degradation process of CH3NH3PbI3 in humid air, characterized by applying ellipsometry technique, is further presented and discussed., N. J. Podraza and K. Ghimire would like to acknowledge D. Zhao, A. Cimaroli, Y. Ke, F. Hong, T. Shi, and Prof. Y. Yan for providing samples and materials; M. Junda for graphical assistance; and the National Science Foundation for financial support (CHE-1230246). M. I. Alonso acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through grants CSD2010-00044, MAT2015-70850-P, and the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Superconducting medium speed synchronous electrical generator for 2MW class wind mills

  • Granados, Xavier
  • López López, Josep
  • Muñoz, A.
  • Rodriguez-Izal, J. L.
  • Salvatierra, C.
  • Martínez Fernández, Elena
  • Angurel, Luis A.
  • Puig Molina, Teresa
  • Obradors, Xavier
Trabajo presentado a la 13th European Conference on Applied Superconductivity (EUCAS), celebrada en Geneva (Suiza) del 17 al 21 de septiembre de 2017., In the context of the National Co-funded Project “Design of a New generation of Generators and Ancillary Equipment for Wind Energy Based on Superconductors”, Gamesa Innovation and Technology S.L.U., ICMAB-CSIC and ICMA-CSIC-UNIZAR have developed and built a first protoype of a Medium Speed generator based in the well proved 2MW DFIG generators which are extensively installed in the Drive Train of the existing 2MW class Wind Turbines. The prototype has been tested in order to determine its thermal and electrical performances and possible cost competitiveness considering the global impact, in the medium size wind generators, considering thermal, mechanical and electrical concerns. Details of the superconducting architecture developed, cryogenics and mechanical concerns are reported.The resulting generator is able to improve the power an simplifies the overall system, Authors acknowledge the support of Spanish Ministry of Economy, Industry and Competitiveness for the Retos Colaboración funding RTC-2014-1740-3, Severo Ochoa Programme Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC) and project MAT2014-56063-C2-1-R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Protein-surface interactions at the nanoscale: Atomistic simulations with implicit solvent models

  • Malaspina, David C.
  • Pérez Fuentes, Leonor
  • Drummond, Carlos
  • Bastos González, Delfi
  • Faraudo, Jordi
A full molecular-level understanding of protein adsorption in important situations such as the formation of protein films at solid/liquid interfaces or the formation of a protein corona over inorganic nanoparticles is still lacking. All-atomic implicit solvent molecular dynamics (MD) simulations, which are successfully employed in many related protein studies (such as protein folding for example) are emerging also as a useful tool to investigate proteins at surfaces. Implicit solvent simulations replace the detailed description of the solvent by a continuum media and effective atom–atom interactions retaining the atomistic detail in the description of the system of interest. This allows the simulation of larger systems and longer time scales as compared with full MD simulations including explicit solvent. In this brief review, we present an overview of the current state of the application of this technique to the study of problems such as the interaction of proteins with solid surfaces and the structure of protein corona over inorganic nanoparticles. Limitations of the approach and future perspectives are also outlined., We acknowledge financial support from the Spanish Government grants MAT2015-64442-R, FIS2016-80087-C2-1-P and SEV-2015-0496 and from the Junta de Andalucia Grant CTS-6270. D.C.M. is supported by the European Union's Horizon 2020 Research and Innovation Programme under Marie Sklodowska-Curie grant agreement No 6655919. We thank CESGA Supercomputing Center for technical support and for the use of supercomputing resources., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Opportunities of Bacterial Cellulose to Treat Epithelial Tissues

  • Anton Sales, Irene
  • Beekmann, Uwe
  • Laromaine, Anna
  • Roig Serra, Anna
  • Kralisch, Dana
In this mini-review, we highlight the potential of the biopolymer bacterial cellulose to treat damaged epithelial tissues. Epithelial tissues are cell sheets that delimitate both the external body surfaces and the internal cavities and organs. Epithelia serve as physical protection to underlying organs, regulate the diffusion of molecules and ions, secrete substances and filtrate body fluids, among other vital functions. Because of their continuous exposure to environmental stressors, damage to epithelial tissues is highly prevalent. Here, we first compare the properties of bacterial cellulose to the current gold standard, collagen, and then we examine the use of bacterial cellulose patches to heal specific epithelial tissues; the outer skin, the ocular surface, the oral mucosa and other epithelial surfaces. Special emphasis is made on the dermis since, to date, this is the most widespread medical use of bacterial cellulose. It is important to note that some epithelial tissues represent only the outermost layer of more complex structures such as the skin or the cornea. In these situations, depending on the penetration of the lesion, bacterial cellulose might also be involved in the regeneration of, for instance, inner connective tissue., The authors IA, AL and AR acknowledge the financial support from the Spanish Ministry of Science, Innovation and Universities through the MAT2015-64442-R project, the ‘Severo Ochoa’ Programme for Centers of Excellence in R&D (SEV-2015-0496) and the PhD scholarship of I.A. (BE-2016-076734) and the Generalitat de Catalunya for the 2017SGR765 project. These authors also express their gratitude to the Centre d’Oftalmologia Barraquer for their helpful suggestions in the elaboration of this manuscript., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

A review on synthesis of graphene, h-BN and MoS2 for energy storage applications: Recent progress and perspectives

  • Kumar, Rajesh
  • Sahoo, Sumanta
  • Ednan, Joanni
  • Singh, Rajesh Kumar
  • Yadav, Ram Manohar
  • Verma, Rajiv Kumar
  • Singh, Dinesh Pratap
  • Tan, Wai Kian
  • Pérez del Pino, Ángel
  • Moshkalev, Stanislav A.
  • Matsuda, Atsunori
The significance of graphene and its two-dimensional (2D) analogous inorganic layered materials especially as hexagonal boron nitride (h-BN) and molybdenum disulphide (MoS2) for “clean energy” applications became apparent over the last few years due to their extraordinary properties. In this review article we study the current progress and selected challenges in the syntheses of graphene, h-BN and MoS2 including energy storage applications as supercapacitors and batteries. Various substrates/catalysts (metals/insulator/semiconducting) have been used to obtain graphene, h-BN and MoS2 using different kinds of precursors. The most widespread methods for synthesis of graphene, h-BN and MoS2 layers are chemical vapor deposition (CVD), plasma-enhanced CVD, hydro/solvothermal methods, liquid phase exfoliation, physical methods etc. Current research has shown that graphene, h-BN and MoS2 layered materials modified with metal oxide can have an insightful influence on the performance of energy storage devices as supercapacitors and batteries. This review article also contains the discussion on the opportunities and perspectives of these materials (graphene, h-BN and MoS2) in the energy storage fields. We expect that this written review article including recent research on energy storage will help in generating new insights for further development and practical applications of graphene, h-BN and MoS2 layers based materials., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

On the road toward calcium-based batteries

  • Ponrouch, Alexandre
  • Palacín, M. Rosa
This article reviews the progress in the development of a possible battery technology based on calcium, which is an abundant element and has an interesting standard reduction potential. The main bottleneck has been to find electrolytes enabling reversible plating and stripping of calcium, which has been overcome recently. Ongoing efforts focus in optimizing them to enable effective operation of calcium anodes at room temperature and within a large redox potential operation window, despite the formation of a passivation layer at the electrolyte/anode interface. In parallel, researchers are looking for suitable cathode materials enabling reasonably fast insertion and de-insertion of Ca2+ ions, which need to be probed using diverse complementary characterization techniques to avoid biased interpretation of results derived from possible side reactions., Authors are grateful to Fanny Barde (Toyota Motor Europe) and M. Elena Arroyo-de Dompablo for fruitful collaboration and helpful discussions and the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496). Funding from the European Union's Horizon 2020 research and innovation programme H2020 either from the European Research Council (A. Ponrouch ERC-2016-STG, CAMBAT grant agreement no. 715087) or FETOPEN-1-2016-2017 (CARBAT, grant agreement no. 766617) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Nanostructured Electroactive Materials with Large Charge Capacity: Direct Field Electrostimulation Through Connected and Non-connected Electrodes

  • Rajnicek, Ann M.
  • Suñol, Cristina
  • Casañ Pastor, Nieves
Electric field stimulation protocols depend on the electrode material used, but the material characteristics are often not considered or sufficiently described for optimization. Furthermore, charge capacity is considered only in capacitor-like systems, without taking into account that intercalation materials offer an internal faradaic charge delivery advantage, with substantially less risk for biological systems. This chapter describes new materials with high charge capacities, appropriate electric field protocols for using them, and examples of neural cultures that can be used to elucidate the biological effects of fields. Mammalian neurons, neuron–astrocyte co-cultures, and amphibian spinal neurons are used in vitro, often as scratch wound models, to assess their potential for stimulating tissue repair. Importantly, remote control of dipoles induced in conducting implanted materials is shown to be a new promising approach and a breakthrough., The present work has been financed by the Ministry of Science of Spain (MAT2015-65192-R and RTI2018-097753-B-I00), Fundació Marató TV3 (110130/31), Severo Ochoa Program (SEV-2015-0496 and CEX2019-000917-S) and EU grant FP6-2004-NEST-C1 028473.