Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Selective lignin conversion via flow photocatalysis for vanillin and bioplasticizers production

  • Marset, Xavier
  • Montilla-Verdú, Salvador
  • Pastor, Francisco J.
  • Rico Vargas, Elio
  • Gomez-Caturla, Jaume
  • Miranda-Pinzon, Mario
  • Lazaro-Hdez, Carlos
  • Bertella, Stefania
  • Ortuño, Manuel A.
  • Balart, Rafael
  • Aschauer, Ulrich
  • Guijarro, Nestor
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
  • Montilla-Verdú, Salvador|||/items/1f60cace-de12-4c2f-b23d-656d1466fe87
  • Rico Vargas, Elio|||/items/e0ee2f23-487d-4722-b959-2a3749d57bd1
  • Ortuño, Manuel A.|||/items/8e15fce8-7d2f-408c-83de-bc85da711f44
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
Lignin valorization remains a roadblock in the development of green biorefineries. Currently, depolymerization strategies predominantly depend on energy- and resource-intensive thermochemical methods, while potential applications of the resulting bio-based products are often overlooked. Here, we show a scalable photocatalytic flow reactor for lignin deconstruction that operates at ambient conditions, along with a downstream process that yields commercially viable products at gram scale. An anthraquinone-based photocatalytic platform, when packed in a flow bed reactor, is demonstrated to selectively and nearly quantitatively cleave lignin’s β-O-4 moieties, achieving a benchmark yield of 7.1 wt% for vanillin. The utilization of residual oligomers as plasticizers for biobased polylactic acid resulted in improved mechanical properties and shape memory effects, while maintaining its suitability for conventional 3D printing. This aldehyde-oriented platform represents a key advancement that complements existing ketone-oriented photocatalytic approaches targeting valuable chemicals from lignin conversion, and it ultimately contributes to the holistic utilization of lignin.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Solvent-Free Synthesis of Poly(lactic acid) by Reactive Extrusion: Role of α-Tocopherol and Catalyst Loading

  • Miranda-Pinzon, Mario
  • Gomez-Caturla, Jaume
  • Jiménez, Alfonso
  • Garrigós, María del Carmen
  • Balart, Rafael
  • Marset, Xavier
  • Jiménez, Alfonso|||/items/bbdcc026-8576-4bf4-95b9-40453b9ff3ec
  • Garrigós, María del Carmen|||/items/e102a891-6551-4c12-a4f0-f84d26eacd65
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
Poly(lactic acid) (PLA) was synthesized by ring-opening polymerization (ROP) of l-lactide through reactive extrusion using Sn(Oct)2 as the catalyst, 1-dodecanol as the initiator, and α-tocopherol as a natural antioxidant. This work combined reaction-time monitoring with structure–property analysis to define the optimum processing window and formulation. In the first stage, samples collected during reactive extrusion were analyzed by differential scanning calorimetry (DSC) and Fourier-transform infrared (FTIR), showing the progressive consumption of l-lactide and the formation of PLA. The main monomer-related signals disappeared after approximately 12 min, while the most favorable thermal response was obtained after 18 min, indicating an optimum balance between conversion and thermal exposure. In the second stage, the effects of α-tocopherol and catalyst:monomer ratio were evaluated by mechanical, thermal, colorimetric, gel permeation chromatography (GPC), and FTIR analyses. For the 1:1000 formulation, α-tocopherol increased the molecular weight to 30,926 g mol–1 and the tensile strength to 34.1 MPa while also enhancing crystallinity and preserving a lighter, less yellow appearance. Among the antioxidant-containing samples, the 1:1000 catalyst:monomer ratio provided the best overall balance between conversion, molecular weight, mechanical performance, and thermal behavior. FTIR confirmed successful PLA formation in the optimized formulations, whereas the 1:5000 sample retained lactide-related bands, consistent with incomplete conversion and inferior properties. These results demonstrate that reactive extrusion is a viable solvent-free route for PLA synthesis when residence time, natural antioxidant stabilization, and catalyst loading are jointly optimized.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Naturally occurring eugenyl acetate as biobased plasticizer for sustainable polylactide formulations with improved toughness

  • Barrera-Juca, D.
  • Lazaro-Hdez, Carlos
  • Gomez-Caturla, Jaume
  • Guijarro, Nestor
  • Marset, Xavier
  • Balart, Rafael
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
In this study, we explore the potential of eugenyl acetate (EAc), a naturally occurring ester of eugenol, as a biobased plasticizer to overcome the intrinsic brittleness of polylactide (PLA) derived from starch. A theoretical assessment of the miscibility between PLA and EAc is carried out. Our findings demonstrate that EAc shows exceptional miscibility with PLA, as confirmed by their similar solubility parameters (EAc-19.83 MPa1/2, and PLA-20.66 MPa1/2), and an interaction parameter of χ = 0.39. The incorporation of EAc improves the ductility of PLA, with strain at break increasing to 427.7 % at 20 wt% EAc, compared to a brittle 10.2 % for neat PLA. The plasticizing effect of EAc also leads to a considerable reduction in the glass transition temperature of PLA, from 60.4 °C to 35.7 °C at 20 wt% EAc. Scanning electron microscopy reveals no phase separation and the development of plastic deformation in PLA formulations with 15–20 wt% EAc. Additionally, all plasticized formulations exhibit full biodegradation in controlled compost conditions in <8 weeks. These results contribute to advancing PLA-based formulations that are both high-performance and eco-friendly, supporting the broader goals of sustainable development in polymer science.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhanced properties of methyl hydroxyethyl cellulose films with arabinoxylans-rich extract from brewer's spent grain

  • Rojas-Lema, Sandra
  • Mellinas-Ciller, Ana-Cristina
  • Jiménez, Alfonso
  • Garrigós, María del Carmen
  • Garcia-Garcia, Daniel
  • Balart, Rafael
  • Garrigós, María del Carmen|||/items/e102a891-6551-4c12-a4f0-f84d26eacd65
  • Jiménez, Alfonso|||/items/bbdcc026-8576-4bf4-95b9-40453b9ff3ec
  • Mellinas-Ciller, Ana-Cristina|||/items/8f6577ab-b8f1-410d-9d1e-fa3fbf1b7f01
Environmentally friendly methyl hydroxyethyl cellulose (MHEC)-based films added with different amounts (10–30 wt.%) of an arabinoxylans-rich extract (AxRE) obtained from brewer's spent grain (BSG) were developed by the solvent casting method. Some decrease in mechanical properties of films was shown with increasing AxRE content. Addition of AxRE led to a decrease in tensile strength to 23.0–33.7 MPa which are typical of commodity plastics used in the packaging industry. AxRE increased the thermal stability of MHEC-based films, as evidenced by a slight increase in melting point observed through differential scanning calorimetry (DSC) together with a delay in the thermodegradation profile obtained by thermogravimetric analysis (TGA), with onset degradation temperatures above 300 °C for all compositions. Additionally, films with AxRE showed higher hydrophobic behavior, increasing water contact angle from 58.6° (neat MHEC) up to 67.8° for films containing 20 wt.%-AxRE and a decreasing in the moisture content of MHEC films (5.6 %) to 4.2 % for films containing 10 wt.%-AxRE. Interestingly, the arabinoxylans-rich extract significantly increased the antioxidant activity of MHEC-based films with values up to 50 % of 2,2-diphenyl-1-picrylhydrazyl (DPPH) inhibition in films with 20 wt.%-AxRE. The obtained films show potential for active packaging, given that they have demonstrated to provide important antioxidant activity.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

From agro-waste to functional biopolymers: High-lignin PLA composites plasticized with eugenyl acetate for circular economy-based materials

  • Barrera-Juca, D.
  • Gomez-Caturla, Jaume
  • Vicente-Vinas, M.P.
  • Balart, Rafael
  • Marset, Xavier
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
Polylactic acid (PLA) is one of the most widely used bioplastics; however, its inherent brittleness and the limited filler contents typically employed restrict both its performance and bio-based content. In this work, fully disintegrable under industrial composting conditions PLA biocomposites containing exceptionally high lignin contents (30–50 wt%) were successfully developed using eugenyl acetate (EAc) as a fully natural plasticizer and itaconic anhydride–grafted PLA (PLA-g-IA) as a compatibilizer. Eugenyl acetate induced a drastic reduction in the glass transition temperature and transformed PLA into a highly ductile material, achieving strain at break values exceeding 400%. The incorporation of lignin significantly increased stiffness, hardness, and char formation, while progressively reducing toughness at high loadings. Among the investigated formulations, the composite containing 30 wt% lignin exhibited the best balance between ductility, stiffness, and bio-based content, maintaining strain at break values more than 100% higher than neat PLA. Mechanical, thermomechanical, thermal, morphological, and surface analyses confirmed that the combined plasticization-compatibilization strategy enables stable processing and functional performance even at extreme lignin contents. All materials fully disintegrated under industrial composting conditions within six weeks, demonstrating that neither lignin nor eugenyl acetate compromise end-of-life circularity. These results establish a new pathway for designing high-bio-content, fully disintegrable PLA materials through synergistic natural modification strategies.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sustainable Approach to Overcome Polylactide Brittleness with Biobased Esters of Isosorbide and Fatty Acids

  • Miranda-Pinzon, Mario
  • Gomez-Caturla, Jaume
  • Ivorra-Martinez, Juan
  • Guijarro, Nestor
  • Marset, Xavier
  • Balart, Rafael
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
This work reports on the design and synthesis of sustainable plasticizers from plant-based isosorbide to enhance the intrinsic brittleness of polylactide (PLA). To keep fully biobased carbon, isosorbide was esterified with fatty acids of varying chain length, leading to isosorbide dibutyrate (IDB), dicaprylate (IDC), and dipalmitate (IDP). These esters were incorporated into PLA at different concentrations. An approach to assess PLA-plasticizer miscibility was conducted by calculating solubility parameters (δ) and the Flory–Huggins interaction parameter, χ. The effect of plasticizer type and concentration on mechanical, thermal, and thermomechanical properties, as well as on microstructure and biodegradation, was also addressed. The results indicated that IDB and IDC notably enhanced PLA toughness, reducing the PLA’s glass transition temperature (Tg) from 60.3 to 27.7 °C with 20 wt % IDC. Consequently, strain at break dramatically increased from 12.8% (PLA) to over 300% with 20 wt % IDB or IDC. In contrast, IDP exhibited limited miscibility, resulting in phase separation, though it still improved the impact strength and ductility. All formulations demonstrated exceptional disintegration in compost soil, underscoring their potential as “double green” plasticizers suitable for PLA. Since both PLA and isosorbide can be industrially derived from starch, this work places starch as a key platform for sustainable polymers.