Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Development of hard X-ray photoelectron spectroscopy in liquid cells using optimized microfabricated silicon nitride membranes [Dataset]

  • Capone, F.
  • Muntada, Olga
  • Ramírez, Jéssica Casandra
  • Esplandiú, María J.
  • Dedryvère, R.
  • Grimaud, A.
  • Lassalle-Kaiser, B.
  • Céolin, D.
  • Perez Murano, Francesc X.
  • Rueff, J. P.
  • Fraxedas, J.
[Description of methods used for collection/generation of data] Data acquired with a high-kinetic-energy Scienta EW 4000 hemispherical analyser installed on the HAXPES endstation of the GALAXIES beamline of the French national synchrotron facility SOLEIL (France) [Methods for processing the data] CasaXPS software., Original raw data (uncorrected energies) of HAXPES spectra obtained at the HAXPES endstation of the GALAXIES beamline at SOLEIL synchrotron facility (France). Each spectrum is displayed in a two-column format, kinetic energy (X) vs. HAXPES intensity (Y). Photon energies are indicated for each figure., [FIGURE 5] HAXPES raw data of the Au 4f region in kinetic energy (X) vs. intensity (Y) columns of a 40 nm Au film (au_film_40nm), a dispersion of Au nanoparticles on a 25 nm-thick membrane in air (au_np_cell16), a dispersion of Au nanoparticles in MilliQ water (au_np_cell17) and a Au film treated with oxygen plasma and measured with 1486.6 eV photons (au_film_O2_plasma, data from DOI: 10.1021/acs.accounts.8b00241). Photon energy = 5 keV., [FIGURE 6] HAXPES raw and normalized (norm) data of the (a) N 1s, (b) O 1s, (c) C 1s and (d) F 1s lines obtained with 7 keV photons and using 20 nm thick membranes. Liquid cells filled with: air (S2), vacuum (S4), with air and with a ca 5 nm-thick amorphous carbon coating deposited in the inner part of the membrane (S7) and with 60 ml of the LP57 electrolyte (1 M LiPF6 in EC:EMC 3:7) and with the ca 5 nm-thick carbon coating (S6). The formulas used for normalization (heights normalized to their corresponding maxima) are displayed in the corresponding Y columns. In Fig. 6(d) a least-squares fit using the CasaXPS software after a Shirley-type background subtraction using a combination of Gaussian (70%) and Lorentzian (30%) functions under the constraint of identical full width at half-maximum (FWHM) for all components is shown. Raw and corrected kinetic energies are given., [FIGURE 7] HAXPES raw data of the (a) Na 1s region of a 3.5 M NaCl aqueous solution and (b) Cs 3d and (c) Cs 4d lines of a 2.6 M aqueous solution of CsCl obtained with 7 keV photons and using 15 nm membranes., [FIGURE S1] (Top) simulation of the inelastic mean free path (nm) as a function of the kinetic energy in silicon nitride using the TPP-2M model and assuming a 3.44 gr cm-3 density for silicon nitride. (Bottom) Simulated HAXPES spectra assuming a 15 nm thick silicon nitride layer on a CsCl substrate in the 3-10 keV photon energy range., European Union’s Horizon 2020 research and innovation programme, under grant agreement No. 101007417 NFFA-Europe Pilot. Spanish Ministry of Science and Innovation (MCIN) under contract No. PID2021-124568NB-I00. ICN2 is funded by the CERCA program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa Centres of Excellence programme, grant CEX2021-001214-S, funded by MCIN/AEI. Support through the Marıa de Maeztu grant CEX2023-001397-M funded by MICIU/AEI is acknowledged. Generalitat de Catalunya through the 2021-SGR-00644 project. European Union’s Horizon 2020 research and innovation programme under grant agreement No. 957189., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001397-M)., File List: Fig_5.xls; Fig_6a.xls, Fig_6b.xls, Fig_6c.xls, Fig_6d.xls, Fig_7.xls, Fig_S1.xls, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Lowering the activation temperature of Ti-Zr-V non-evaporable getter films by removing surface carbon contamination: an in situ XPS study

  • Fraxedas, J.
  • Sauthier, Guillaume
  • Tran, L.
  • Carlino, Vincent
FIGURE 1: XPS raw data of the (a) C1s, (b) Ti2p, (c) Zr3d and (d) O1s-V2p lines, respectively, after an annealing and in situ oxygen plasma treatment (50 W for 15 min) and annealing at four different temperatures: 100 °C, 130 °C, 150 °C and 200 °C. FIGURE 2: XPS raw data of the (a) C1s, (b) Ti2p, (c) Zr3d and (d) O1s-V2p lines, respectively, of an as-received sample, after an in situ argon (80%)/oxygen (20%) plasma treatment (60 W for 2h) and after an annealing at 150 °C overnight. FIGURE 3: XPS raw data of the O1s-V2p lines corresponding to different sequential plasma and annealing cycles performed at 150 °C overnight in all cases. FIGURE 4: Normalized O1s area ratio as a function of annealing at 100, 130, 150 and 200 °C, respectively. FIGURE 5: XPS raw spectra corresponding to the O1s core level of Ti-Zr-V films undergoing plasma and 150 °C annealing cycles: (a) 50 W oxygen plasma for 15 min and (b) 60 W argon/oxygen plasma for 2 h. The intensity of the spectra corresponding after annealing have been multiplied by a factor of two. FIGURE 6: XPS raw data of the (a) C1s, (b) Ti2p, (c) Zr3d and (d) O1s-V2p lines, respectively, of a sample exposed to argon (80%)/oxygen (20%) plasma (60 W for 2 h) after an annealing at 150 °C overnight and the same sample stored in UHV (≈ 1×10-9 mbar) for 5 days. Spectra have been normalized to their maxima. FIGURE 7: XPS raw data of the Si2p lines corresponding to as-received samples and after different plasma treatments: oxygen plasma (50 W, 15 min), argon/oxygen (50 W, 2 h) and (60 W, 2 h). FIGURE S2: Experimental and simulated (using SESSA software) survey XPS spectra. FIGURE S3: XPS raw data of the C1s core level of an as-received Ti-Zr-V film, after an exposure to a first 50W oxygen plasma cycle for 15 min, after an overnight annealing at 150 °C and after a subsequent second 50W oxygen plasma cycle for 15 min. FIGURE S4: XPS raw data of the C1s core level of an as-received sample with the corresponding least-squares fits using the CasaXPS software after a Shirley-type background subtraction using a combination of Gaussian (70%) and Lorentzian (30%) functions under the constraint of identical full width at half maximum (FWHM) for all components. FIGURE S5: XPS raw data of the N1s core level of an as-received sample, after exposure to an argon/oxygen plasma (80%-20%) at 60 W for 2 and after annealing overnight at 150 °C. FIGURE S6: XPS raw data of the (a) C1s, (b) Ti2p, (c) Zr3d and (d) O1s-V2p lines, respectively, after an annealing at 130 °C for 24 h, oxygen plasma treatment (50 W for 15 min), annealing al 200 °C for 1 h and exposure at a base pressure of ≈ 5 × 10-7 mbar for 16 h., [Description of methods used for collection/generation of data] Data acquired with a SPECS PHOIBOS150 hemispherical analyser with a monochromatic X-ray source (1486.6 eV) operated at 300W. The overall experimental resolution, including the contribution from the hemispherical analyser (energy and angle) and the monochromatic X-ray source, is better than 0.6 eV for a pass energy of 20 eV. The reported binding energies have been determined with an error of ±0.1 eV and are referred to the Fermi level of the analyser, which is periodically determined by measuring the photoelectron energies from an atomically clean reference Au(111) sample. No correction to the measured binding energies has been applied to the spectra., [Methods for processing the data] CasaXPS software version 2.3.16 PR 1.6., Original raw data of XPS spectra obtained in ORIGIN format. Columns (X) correspond to binding energies and columns Y to XPS intensity (Y). The different plasma and annealing conditions are indicated in the corresponding columns (“in Comments”). Labels in “Long name” files correspond to the original CasaXPS files names. Photon energy is 1486.6 eV., - Spanish Ministry of Science and Innovation (MCIN) under Contract Nos. PGC2018-095032-B-100 and PID2021-124568NB-I00. - The ICN2 is funded by the CERCA program/Generalitat de Catalunya. - The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., ile List: figure_01.opju; figure_02.opju; figure_03.opju; figure_04.opju; figure_05.opju; figure_06.opju; figure_07.opju; figure_S2.opju, figure_S3.opju, figure_S4.opju, figure_S5.opju, figure_S6.xls, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

2D MoS2/Cu2O on 3D mesoporous silica as visible-NIR nanophotocatalysts for environmental and biomedical applications

  • Shahnazarova, Gubakhanim
  • Ramírez, Jéssica Casandra
  • Al Hoda Al Bast, Nour
  • Fraxedas, J.
  • Nogués, Carme
  • Nogués, Josep
  • Serrà, Albert
  • Sepúlveda, Borja
  • Esplandiú, María J.
[Description of methods used for collection/generation of data] - Experimental UV-VIS spectroscopy (Figure_3a.opju). Data acquired with a Cary 4000 spectrophotometer without data processing. - Experimental Photoluminescence spectroscopy (Figure_3b.opju): Data acquired with a Horiba T64000 spectrometer without data processing - Experimental Raman spectroscopy (Figure_3c.opju): Data acquired with a Horiba T64000 spectrometer without data processing - Experimental Diffraction spectroscopy (Figure_3d.opju): Data were acquired using a Malvern PANanlytical X´pert Pro MDP, without data processing. - Experimental determination of the band-gap (Figure_S3a.opju and Figure_S3b.opju): Data were acquired using UV-VIS diffuse reflectance spectroscopy (Cary 4000 spectrophotometer) in combination with Kubelka-Munk Analysis. - Experimental XPS data (Figure_4.opju and Figure S2.opju): XPS data: Data acquired with a SPECS PHOIBOS150 hemispherical analyser with a monochromatic X-ray source (1486.6 eV) operated at 300W. The overall experimental resolution, including the contribution from the hemispherical analyser (energy and angle) and the monochromatic X-ray source, is better than 0.6 eV for a pass energy of 20 eV. The reported binding energies have been determined with an error of ±0.1 eV and are referred to the Fermi level of the analyser, which is periodically determined by measuring the photoelectron energies from an atomically clean reference Au(111) sample. No correction to the measured binding energies has been applied to the spectra. - Experimental Data for photodegradation of Tetracycline (Figure_5a.opju, Figure_5b.opju, Figure_5c.opju Figure_5d.opju). The photocatalyst, either MoS2 or MoS2-Cu2O, (4 cm²), was immersed in a solution containing 5 ppm tetracycline (TC) (pH=6 and pH=8). The system was kept in the dark for 30 min to reach adsorption equilibrium. Afterward, the nanoreactors were irradiated with visible light using a warm LED (λ > 420 nm, max. 600 nm, 52 × 10⁻³ W·cm⁻²). The photoreaction progress was monitored via absorbance measurements using a Cary 4000 spectrophotometer and the Lambert-Beer law (supported files: Figure_data_support_photodegradation_TC-MoS₂_Cu₂O_pH6.opju, Figure_data_support_photodegradation_TC-MoS₂_pH8.opju, Figure_data_support_photodegradation_TC-MoS₂_pH6.opju). By observing the decay of TC absorbance over time from its initial value in presence of light, the variation in TC concentration was determined using the Lambert-Beer law, enabling the generation of the plots in Figs. 5a and 5c, as well as part of Fig. 5b. The rate constant of the photodegradation process was obtained by performing a linear fit of the plot Ln(C/C₀) vs. time using the Origin program for data processing. Additionally, the total organic content (TOC) analysis (Figure_5b.opju) was conducted using a TOC-VCSH instrument. - The experimental data corresponding to reactive oxygen species identification and photocatalyst recyclability of MoS2-Cu2O (Figure_6a.opju and Figure_6b.opju), were extracted by observing the changes of TC absorbance over time from its initial value with the spectrophotometer Cary 4000. In the case of Figure_6a, the experiments were performed in presence and in absence of ROS quenchers and in Figure_6b.opju, the same photocatalysts was re-used 10 times and evaluated its performance through the absorbance decay of TC in presence of light. - Experimental Data for photodegradation of Anatoxin (Figure_7a.opju, Figure_7b.opju, Figure_7c.opju). The MoS₂/Cu₂O photocatalyst (4 cm²) was immersed in a solution containing 20 ppm of Anatoxin-A. The system was kept in the dark for 30 min to reach adsorption equilibrium. Afterward, the nanoreactors were irradiated with visible light using a warm LED (λ > 420 nm, max. 600 nm, 52 × 10⁻³ W·cm⁻²). The anatoxin photodegradation was analyzed via high-performance liquid chromatography (HPLC) using a Waters Alliance 2795 instrument equipped with a PDA detector (Waters 2996) and a mass detector (Waters ZQ 2000). The changes of Absorbance of Anatoxin through HPLC measurements were collected in Figure_7a.opju. The degradation and kinetics evaluation was similar to the case of TC. The kinetics of the photodegradation process was obtained by performing a linear fit of the plot Ln(C/C₀) vs. time using the Origin program for data processing. Additionally, the total organic content (TOC) analysis (Figure_7b.opju) was conducted using a TOC-VCSH instrument., [Methods for processing the data] - XPS experimental data: CasaXPS software version 2.3.16 PR 1.6 - Experimental determination of the band-gap: data were processed for extracting the Kubelka-Munk function using Origin program tools. - Experimental Data for photodegradation of Tetracycline: the kinetics of the photodegradation reaction was evaluated by linear fits to the curves Ln(C/C0) vs time, using Origin software tools. - Experimental Data for photodegradation of Anatoxin-A: the HPLC measurements were smoothed with Origin program tools and the kinetics of the photodegradation reaction was evaluated by performing linear fits to the Ln(C/C0) vs time curves, also using Origin software tools., - The Ministerio de Ciencia e Innovación (MICIN). Grants DIN2021-011916, TED2021-129898B-C22, TED 2021-129898B-C21, PID 2020-116844RB-C21, PID2022-138588OB-C31, PID2022-138588OB-C32 and PID 2021-124568NB-I00 funded by NextGenerationEU and MICIU/AEI/10.13039/501100011033. - Departament de Recerca i Universitats, particularly the Departament d'Acció Climàtica, Alimentació i Agenda Rural, as well as the Fons Climàtic de la Generalitat de Catalunya (project 2023 CLIMA 00009 AGAUR) - CERCA program/Generalitat de Catalunya. - Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S (ICN2) and Maria de Maeztu Centres of Excellence program Grant CEX2023-001397-M (IMB-CNM), both funded by MCIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001397-M)., File List: Figure_3a.opju, Figure_3b.opju, Fig_4_right.opju; Fig_4_right.opju; Fig_4_inset_a_VBM.opju , Fig_4_inset_c_VBM.opju, Figure_5a.opju, Figure_5b.opju; Figure_5c.opju; Figure_5d.opju; Figure_6a.opju, Figure_6b.opju; Figure_7a.opju; Figure_7b.opju; Figure_7c.opju; Figure_S2.opju, Figure_S3a.opju; Figure_S3b.opju, Figure_data_support_photodegradtion_TC-MoS2_Cu2O_pH8.opju, Figure_data_support_photodegradtion_TC-MoS2_Cu2O_pH6.opju, Figure_data_support_photodegradtion_TC-MoS2_pH8.opju, Figure_data_support_photodegradtion_TC-MoS2_pH6.opju., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Research data for publication 'Strong charge-photon coupling in planar germanium enabled by granular aluminium superinductors'

  • Janík, Marián
  • Roux, Kevin
  • Borja-Espinosa, Carla
  • Sági, Olivér
  • Baghdadi, Abdulhamid
  • Adletzberger, Thomas
  • Calcaterra, Stefano
  • Botifoll, Marc
  • Garzón Manjón, Alba
  • Arbiol, Jordi
  • Chrastina, Daniel
  • Isella, Giovanni
  • Pop, Ioan
  • Katsaros, G.
Research Data for publication 'Strong charge-photon coupling in planar germanium enabled by granular aluminium superinductors', We acknowledge Franco De Palma, Mahya Khorramshahi, Fabian Oppliger, Thomas Reisinger, Pasquale Scarlino and Xiao Xue for helpful discussions. We thank Simon Robson for proofreading the manuscript. This research was supported by the Scientific Service Units of ISTA through resources provided by the MIBA Machine Shop and the Nanofabrication facility. This research and related results were made possible with the support of the NOMIS Foundation and the HORIZON-RIA 101069515 project. This research was funded in whole or in part by the Austrian Science Fund (FWF) DOI:10.55776/P32235, DOI:10.55776/I5060 and DOI:10.55776/P36507. For Open Access purposes, the author has applied a CC BY public copyright license to any author accepted manuscript version arising from this submission. M.J. acknowledges funding from FellowQUTE 2024-01. I.M.P. acknowledges funding from the Deutsche Forschungsgemeinschaft (DFG – German Research Foundation) under project number 450396347 (GeHoldeQED). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. We acknowledge support from CSIC Interdisciplinary Thematic Platform (PTI+) on Quantum Technologies (PTI-QTEP+). This research work has been funded by the European Commission – NextGenerationEU (Regulation EU 2020/2094), through CSIC's Quantum Technologies Platform (QTEP). ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. AGM has received funding from Grant RYC2021-033479-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR. M.B. acknowledges support from SUR Generalitat de Catalunya and the EU Social Fund; project ref. 2020 FI 00103. The authors acknowledge the use of instrumentation and the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset for "Magneto-ionic control of magnetism through voltage-driven carbon transport" manuscript

  • Tan, Zhengwei
  • Ma, Zheng
  • Privitera, S.
  • Liedke, Maciej O.
  • Hirschmann, Eric
  • Wagner, Andreas
  • Costa Krämer, José Luis
  • Quintana, Alberto
  • García-Tort, A.
  • Herrero Martín, Javier
  • Mei, Yongfeng
  • Chen, Xiang-Zhong
  • Tan, Huan
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
  • Arredondo-López, A.
  • Ibrahim, Fatima
  • Chshiev, Mairbek
  • Longo, E.
  • Rovirola, M.
  • Macià, F.
  • Lopeandía, Aitor
  • Nogués, Josep
  • Pellicer, Eva
  • Sort, Jordi
  • Menéndez, Enric
These datasets support the findings published in the manuscript entitled "Magneto-ionic control of magnetism through voltage-driven carbon transport"., Spanish Government (PID2024-156385OB-I00); MCIN/AEI/10.13039/501100011033 & European Union NextGenerationEU/PRTR (grant Nº CNS2022-135230); European Research Council (2021-ERC-Advanced REMINDS Grant Nº 101054687); France 2030 government grant managed by the French National Research Agency PEPR SPIN ANR-22-EXSP 0009 (SPINTHEORY); The ICN2 is supported by the Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S, grant funded by MCIU/AEI/10.13039/501100011033; Instrumentation financed through Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya; Generalitat de Catalunya (2021-SGR-00651 and 2021-SGR-00804), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

DATASET for Long-term protection of crystalline zinc phosphide (Zn3P2) under atmospheric conditions

  • Tiede, Anja
  • Lemerle, Raphael
  • Hagger, Thomas
  • Rabelo Freitas, Helena
  • Torrens Sampedro, Marta
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Fontcuberta i Morral, Anna
This dataset contains experimental measurement data and analysis files used to generate the figures of the associated publication. It includes raw and modeled spectroscopic ellipsometry data, X-ray diffraction (XRD), Raman spectroscopy, secondary-ion mass spectrometry (SIMS), X-ray photoelectron spectroscopy (XPS), and photoluminescence data. -- The data are organized by manuscript figure and supplementary figure number and are provided together with Jupyter notebooks used for data processing and visualization. Detailed information on data acquisition is provided in the associated publication, while the dataset structure and usage are described in the accompanying README file. -- Transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) data are provided in a separate associated dataset archived at https://doi.org/10.34810/data2689., Dataset for the work titled: Long-term protection of crystalline zinc phosphide (Zn₃P₂) under atmospheric conditions, European Commission: EPFLglobaLeaders - A new PhD training for the next generation of sustainable science leaders; 945363. -- Swiss National Science Foundation: Challenges and opportunities of epitaxy of semiconductors on Graphene; 220221. -- European Cooperation in Science and Technology: European Network for Innovative and Advanced Epitaxy; CA20116. -- European Commission: SOLARUP - Advanced Strategies for Development of Sustainable Semiconductors for Scalable Solar Cell Applications; 101046297. -- European Commission: PRTR-C17.I1. -- European Commission: IU16-014206. -- Government of Catalonia: 2021SGR00457. -- Ministerio de Ciencia, Innovación y Universidades: Severo Ochoa Excellence prorgam; CEX2021-001214-S, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Replication Data for: Long-term protection of crystalline zinc phosphide under atmospheric conditions

  • Rabelo Freitas, Helena
  • Arbiol, Jordi
  • Torrens Sampedro, Marta
  • Spadaro, Maria Chiara
  • Fontcuberta i Morral, Anna
  • Tiede, Anja
  • Lemerle, Raphael
  • Hagger, Thomas
Earth-abundant zinc phosphide (Zn3P2) holds great promise as a photovoltaic absorber for thin-film applications, owing to its direct bandgap of approximately 1.5 eV and its high absorption coefficient in the visible spectrum. Nonetheless, questions remain about the material’s stability in atmospheric environments, given its tendency to react with surrounding water vapor and oxygen. This work presents a comprehensive long-term study to understand how environmental exposure impacts high-quality, monocrystalline epitaxial zinc phosphide. Through a combination of various experimental techniques, such as ellipsometry, Raman spectroscopy, X-ray diffraction measurements, scanning transmission electron microscopy, energy dispersive X-ray spectroscopy, secondary ion mass spectroscopy, and X-ray photoelectron spectroscopy, we reveal that exposure to atmosphere causes substantial oxidation of the thin film surface, penetrating several tens of nanometers into the bulk material. Finally, we show that degradation can be effectively prevented by applying a thin dielectric layer, such as Si3N4 ,or simply by storing the unprotected thin films under vacuum. These findings provide valuable guidelines for the proper handling of the material prior to device fabrication., European Union’s Horizon 2020 Marie Sk lodowska-Curie grant: 945363; COST grant: IZCOZ0 220221; OPERA COST grant: CA 20116; Horizon Europe PathFinder Open project SOLARUP: 101046297; European Union NextGenerationEU: PRTRC17.I1; Severo Ochoa program from Spanish MCIN / AEI: CEX2021-001214-S; Generalitat de Catalunya: 2021SGR00457; European Regional Development Fund (ERDF): IU16-014206, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Replication data for: "Link between graphene features and the resulting functionality of quasi-Van der Waals Zn3P2"

  • Rabelo Freitas, Helena
  • Arbiol, Jordi
  • Spadaro, Maria Chiara
  • Fontcuberta i Morral, Anna
  • Lemerle, Raphael
  • Hagger, Thomas
  • Dede, Didem
  • Piazza, Valerio
  • Mastropasqua, Chiara
  • Marinoni, Stefano
  • Kawashima, Nico
  • Wodzislawski, Kamil Artur
  • Botti, Silvana
  • Michon, Adrien
  • El Alouani, Ahmed
"-Zn3P2, made from earth-abundant elements, is a promising candidate for thin-film solar cells but faces limitations due, to difficulties in achieving n-type doping and its large lattice mismatch with commercial substrates and a high thermal expansion coefficient, causing defects and cracks. Graphene substrates can address these challenges thanks to its weak Van der Waals interactions with Zn3P2 allowing for mechanical transfer of the thin film and a strain-free growth. This study compares five graphene substrates for quasi-Van der Waals epitaxial (q-VdWe) growth of polycrystalline Zn3P2 thin films using molecular beam epitaxy. Surface features like steps and wrinkles on graphene were identified as main nucleation sites for Zn3P2, provided the graphene has minimal point defects. The highest-quality thin films, with the largest grain sizes, were grown on H-CVD graphene on the Si-face of 6H-SiC, featuring solely terraces of atomic height. All substrates showed comparable growth windows for crystalline Zn3P2, with higher growth temperatures improving crystal quality, as indicated by enhanced photoluminescence. Cryo-cathodoluminescence measurements revealed spatially localized sub-bandgap emissions, potentially linked to localized strain fields at grain boundaries of up to ±3% as identified by cross-sectional transmission electron microscopy. This work provides insights into advantages and drawbacks of utilising q-VdWe to produce Zn3P2 thin films for solar cell applications and highlights the roles of graphene substrate choice and growth parameters on Zn3P2 film quality.", COST grant: Grant number: IZCOZ0_220221; SNF Spark grant: Grant number: CRSK-2_221120; Grant agency: Generalitat de Catalunya: Grant number: 2021SGR00457; Grant agency: European Union NextGenerationEU: Grant number: PRTR-C17.I1 ; Grant agency: Severo Ochoa program from Spanish MCIN: Grant number: CEX2021-001214-S; Grant agency: Horizon Europe through the PathFinder Open project SOLARUP: Grant number: -101046297; Grant agency: European Regional Development Fund (ERDF): Grant number: IU16-014206; Grant agency: VanaSiC project: Grant number: ANR-22-CE24-0022-01; Grant agency: ADICT project: Grant number: ANR-22-PEEL-0011, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Ab initio-based kinetic study of zigzag edge reconstruction: formation and diffusion of residual defects [Dataset]

  • Polynskaya, Yulia G.
  • Lebedeva, Irina
  • Knizhnik, Andrey A.
  • Popov, Andrey M.
  • Vyrko, Sergey A.
  • Poklonski, Nikolai A.
We have performed Density Functional Theory (DFT) and kinetic calculations to investigate the reconstruction of zigzag graphene edges. Specifically, we focused on the coalescence of reconstructed edge domains (comprising 57 pairs), which leads to the formation of residual topological defects. These defects serve as domain boundaries and we investigate their diffusion behavior to determine the conditions under which complete, defect-free edge reconstruction can be achieved. Using the Nudged Elastic Band (NEB) method [1,2] as implemented in the VASP code [3], we computed the energy barriers for the three final steps of domain coalescence and the diffusion of residual defects. Structure preoptimization was performed using MOPAC2016 [4]. A kinetic model [5], parameterized with the DFT results, was used to describe the time evolution of reconstructed edge domains and residual defects until their annihilation. The provided dataset contains the input and output files for the DFT calculations ("Edge*.tar.gz" and "TS_calc.tar.gz" for transition state energies), alongside output files from the kinetic model simulations conducted at various temperatures ("kinetic_model.tar.gz"). The input parameters for the kinetic model [5] are summarized in the file input_parameters within "kinetic_model.tar.gz". File "PM3_precalculated_structures.zip" contains PM3 preoptimized coordinates of hand-made structures. ZMT files with internal coordinates can be viewed by Hyperchem, GJF files with XYZ coordinates can be viewed by GaussView., Y.G.P. and A.M.P. acknowledge the support by the Russian Science Foundation grant No. 23-42-10010, https://rscf.ru/en/project/23-42-10010/. A.M.P. acknowledges the support by project FFUU-2024-0003 of the Institute of Spectroscopy of the Russian Academy of Sciences, Russia for the results described in Section 3. S.A.V. and N.A.P. acknowledge support by the Belarusian National Research Program ``Convergence-2030''. IL acknowledges support from the EuroHPC JU under the MAX (Materials design at the Exascale) project (grant no. 101093374), and from the Spanish MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR through grant no. PCI2022-134972-2. ICN2 is supported by the CERCA programme (Generalitat de Catalunya) and the Severo Ochoa Centres of Excellence programme (grant no. CEX2021-001214-S), funded by MCIN/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

High-quality epitaxial five-layer Aurivillius films with in-plane ferroelectricity for electrocaloric cooling [Dataset]

  • Lafuerza, Sara
  • Blasco, Javier
  • Evangelisti, Marco
  • Subías, Gloria
  • Gracia, David
  • Pardo, José A.
  • Barriuso, Eduardo
  • Torrelles, Xavier
  • Padilla-Pantoja, Jessica
  • Caicedo, José Manuel
  • Santiso, José
[Description of methods used for collection/generation of data]: The structural characterization of the films was performed by X-ray diffraction (XRD) 2θ/ω wide scans, X-ray reflectivity (XRR) and reciprocal space maps (RSMs) of selected asymmetric reflections, by using a four-circle X-ray diffractometer (Malvern-Panalytical X'pert Pro MRD) and standard Cu Kα1,2 X-ray source with a parabolic mirror (for reciprocal space maps, a 2xGe(220) monochromator was added to the incident optics). A 2D array PIXcel detector was used. The topography of selected films was studied using atomic force microscopy (AFM) in contact mode (Keysight 5100) over different areas. The structure of the films was also analyzed by high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) on a Fisher Spectra microscope operated at 200 kV. Cross-section lamellas were prepared by focused ion beam (FIB) on a SBTO5 film deposited under optimized conditions, with the cut oriented to show STO [100] zone axis., [Ferroelectric and Electrocaloric Properties]: These properties were investigated by measuring the in-plane polarization using the IDEs with a 500 V-built-in ferroelectric tester (Precision Premier II model, Radiant Technologies). Hysteresis measurements were carried out based on a bipolar triangular wave excitation, and also remanent hysteresis measurements based on half triangular waves following the principle of the positive-up negative-down (PUND) method. The frequency of the triangular wave excitation was set to 2 kHz for both measurement protocols. Temperature (T)-dependent polarization versus E field, P(E, T) curves, were measured on heating in a dedicated homemade cell allowing a maximum temperature of 140 °C. Samples were immersed in a silicon oil bath during the polarization measurements to avoid electric discharges., High-quality purely c-axis oriented epitaxial thin films of the Aurivillius phase Sr2Bi4Ti5O18 with n = 5 (Sr,Bi)TiO3 perovskite-like layers, are grown on SrTiO3 substrates by pulsed laser deposition. The highest crystalline quality is obtained with a 20 wt.% Bi-excess target and average stacking order values in the proximity of the ideal value n = 5 are attained for an optimum deposition temperature of 650 °C. Scanning transmission electron microscopy reveals regions with n ranging from 4 to 6 around an average thickness of n = 5, in agreement with the X-ray diffraction analysis. Interdigital electrodes are used to probe the in-plane polarization and survey the electrocaloric properties. A maximum adiabatic temperature change of ΔT ∼ 0.95 °C for an electric field of 150 kV cm−1 is observed at ≈135 °C. Larger values are expected at higher temperatures around the ferroelectric Curie temperature, TC. Since TC of Sr2Bi4Ti5O18 can be tuned by codoping, the findings pave the way toward a large electrocaloric effect at ambient temperature., S.L. acknowledges funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 101029019. This work was also supported by Ministerio de Ciencia, Innovación y Universidades (PID2021-124734OB-C21), “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2023-001286-S, CEX2023-001263-S and CEX2021-001214-S) and Diputación General de Aragón (E11-23R, E12-23R). D. G. acknowledges financial support from the Gobierno de Aragón through a doctoral fellowship. Authors would like to acknowledge C. Cosculluela from Unidad Técnica en Ingeniería de Microdispositivos (INMA) and R. Valero for the IDEs fabrication at the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas”, through Servicio General de Apoyo a la Investigación from Universidad de Zaragoza. The authors also acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. J. S. acknowledges B. Mundet, F. Belarre and M. Rosado for the STEM images and FIB fabrication of the lamellas, as well as the financial support of the European Commission through the Horizon H2020 funding by H2020-MSCA-RISE-ID:101007825 –ULTIMATE-I. X. T. acknowledges financial support by Ministerio de Ciencia, Innovación y Universidades (PID2021-123276OB-I00)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001263-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Replication Data for: Nanopatterning Optimization of Zinc Phosphide: Hole Mobility up to 560 cm2/Vs with Selective Area Epitaxy (Version 1.1) [Dataset]

  • Rabelo Freitas, Helena
  • Jordi Arbiol
  • Spadaro, Maria Chiara
  • Fontcuberta i Morral, Anna
  • Lemerle, Raphael
  • Hagger, Thomas
  • Dede, Didem
  • Piazza, Valerio
  • Webb, Leo Evan
  • Aigroz, Cynthia
Zinc phosphide (Zn3P2) has been identified as a promising material for low-cost photovoltaics made of earth-abundant elements. In the 90’s, the low performance of the devices based on Zn3P2 was attributed to the poor quality of the crystal. Recently, selective area epitaxy (SAE) has emerged as a method to obtain high quality materials on lattice mismatched substrates, thanks to efficient strain relaxation. Here, we study the relation between the SAE mask characteristics and the resulting optoelectronic properties of Zn3P2 thin films. Photoluminescence spectroscopy and temperature dependent Hall measurements outline the impact of those defects on the optoelectronic properties of the thin films. We correlate the effect of the SAE mask pattern on the formation of specific defects such as stacking faults and rotated domains. Our results suggest that the rotated domains contribute to the carrier transport by providing p-type carriers while the stacking faults are mainly acting as non-radiative recombination centers. Our thickness dependent measurements highlight the key role of the SiO2/Zn3P2 interface, which could induce a highly p-doped region. Overall, these findings drove the optimization of the SAE pattern leading to a record hole mobility (520 cm2/Vs) ever measured for this material. (2025-10-22), Kind of Data: Experimental data; Images, Grant agency: Swiss State Secretariat for Education, Research and lnnovation (SERI), grant number: 2200018; Grant agency: Horizon Europe PathFinder Open project SOLARUP, Grant number: 101046297; Grant agency: Swiss National Science Foundation (SNSF Spark grant), Grant number: CRSK-2-221120; Grant agency: Generalitat de Catalunya, Grant number: 2021SGR00457; Grant agency: European Union NextGenerationEU, Grant number: PRTRC17.I1; Grant agency: Severo Ochoa program from Spanish MCIN / AEI, Grant number: CEX2021-001214-S; Grant agency: European Regional Development Fund (ERDF), Grant number: IU16-014206, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Replication Data for: "An artefact-resilient wide bandwidth bidirectional graphene neural interface" (V1)

  • Prokop, Michał
  • Masvidal Codina, Eduard
  • Baumann, Fanny
  • Rodríguez Dueñas, Jan
The ability to simultaneously record and modulate neural activity is critical for next-generation bidirectional neural interfaces aiming to enable adaptive neuromodulation therapies for neurological disorders. Active graphene transistor technologies are particularly promising for neural recordings, as they extend the ability to monitor brain activity at very low frequencies and support multiplexed operation for high-density neural interfaces. However, their limited charge injection capacity makes them unsuitable for stimulation. In this work, we present a bidirectional neural interface that combines nanoporous reduced graphene oxide (rGO) microelectrodes for high charge-injection focal stimulation and graphene solution-gated field-effect transistors (gSGFETs) for brain activity monitoring. Using scalable cleanroom microfabrication techniques, we monolithically integrate these two graphene-based technologies into fully flexible neural probes, leveraging their complementary functionalities within a single-device platform. We evaluate the performance of the hybrid devices both in saline and in vivo, with a particular focus on transistor performance during stimulation. Our results demonstrate that the recording capability of this bidirectional neural interface, including the monitoring of infraslow and local field potential activity, is not compromised during stimulation. This work highlights the potential of this hybrid neural interface for both basic neurophysiological and clinical translation use., European Union's Horizon Europe research and innovation programme. "MINIGRAPH" project. Grant number: 101070865. -- Swiss State Secretariat for Education, Research and Innovation. Grant number: 2200163. -- Severo Ochoa Centres of Excellence and Maria de Maeztu Units of Excellence programme. Grant number: CEX2021-001214-S, CEX2023-001397-M, 10.13039.501100011033, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001397-M), Peer reviewed