Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Development of hard X-ray photoelectron spectroscopy in liquid cells using optimized microfabricated silicon nitride membranes [Dataset]

  • Capone, F.
  • Muntada, Olga
  • Ramírez, Jéssica Casandra
  • Esplandiú, María J.
  • Dedryvère, R.
  • Grimaud, A.
  • Lassalle-Kaiser, B.
  • Céolin, D.
  • Perez Murano, Francesc X.
  • Rueff, J. P.
  • Fraxedas, J.
[Description of methods used for collection/generation of data] Data acquired with a high-kinetic-energy Scienta EW 4000 hemispherical analyser installed on the HAXPES endstation of the GALAXIES beamline of the French national synchrotron facility SOLEIL (France) [Methods for processing the data] CasaXPS software., Original raw data (uncorrected energies) of HAXPES spectra obtained at the HAXPES endstation of the GALAXIES beamline at SOLEIL synchrotron facility (France). Each spectrum is displayed in a two-column format, kinetic energy (X) vs. HAXPES intensity (Y). Photon energies are indicated for each figure., [FIGURE 5] HAXPES raw data of the Au 4f region in kinetic energy (X) vs. intensity (Y) columns of a 40 nm Au film (au_film_40nm), a dispersion of Au nanoparticles on a 25 nm-thick membrane in air (au_np_cell16), a dispersion of Au nanoparticles in MilliQ water (au_np_cell17) and a Au film treated with oxygen plasma and measured with 1486.6 eV photons (au_film_O2_plasma, data from DOI: 10.1021/acs.accounts.8b00241). Photon energy = 5 keV., [FIGURE 6] HAXPES raw and normalized (norm) data of the (a) N 1s, (b) O 1s, (c) C 1s and (d) F 1s lines obtained with 7 keV photons and using 20 nm thick membranes. Liquid cells filled with: air (S2), vacuum (S4), with air and with a ca 5 nm-thick amorphous carbon coating deposited in the inner part of the membrane (S7) and with 60 ml of the LP57 electrolyte (1 M LiPF6 in EC:EMC 3:7) and with the ca 5 nm-thick carbon coating (S6). The formulas used for normalization (heights normalized to their corresponding maxima) are displayed in the corresponding Y columns. In Fig. 6(d) a least-squares fit using the CasaXPS software after a Shirley-type background subtraction using a combination of Gaussian (70%) and Lorentzian (30%) functions under the constraint of identical full width at half-maximum (FWHM) for all components is shown. Raw and corrected kinetic energies are given., [FIGURE 7] HAXPES raw data of the (a) Na 1s region of a 3.5 M NaCl aqueous solution and (b) Cs 3d and (c) Cs 4d lines of a 2.6 M aqueous solution of CsCl obtained with 7 keV photons and using 15 nm membranes., [FIGURE S1] (Top) simulation of the inelastic mean free path (nm) as a function of the kinetic energy in silicon nitride using the TPP-2M model and assuming a 3.44 gr cm-3 density for silicon nitride. (Bottom) Simulated HAXPES spectra assuming a 15 nm thick silicon nitride layer on a CsCl substrate in the 3-10 keV photon energy range., European Union’s Horizon 2020 research and innovation programme, under grant agreement No. 101007417 NFFA-Europe Pilot. Spanish Ministry of Science and Innovation (MCIN) under contract No. PID2021-124568NB-I00. ICN2 is funded by the CERCA program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa Centres of Excellence programme, grant CEX2021-001214-S, funded by MCIN/AEI. Support through the Marıa de Maeztu grant CEX2023-001397-M funded by MICIU/AEI is acknowledged. Generalitat de Catalunya through the 2021-SGR-00644 project. European Union’s Horizon 2020 research and innovation programme under grant agreement No. 957189., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001397-M)., File List: Fig_5.xls; Fig_6a.xls, Fig_6b.xls, Fig_6c.xls, Fig_6d.xls, Fig_7.xls, Fig_S1.xls, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

2D MoS2/Cu2O on 3D mesoporous silica as visible-NIR nanophotocatalysts for environmental and biomedical applications

  • Shahnazarova, Gubakhanim
  • Ramírez, Jéssica Casandra
  • Al Hoda Al Bast, Nour
  • Fraxedas, J.
  • Nogués, Carme
  • Nogués, Josep
  • Serrà, Albert
  • Sepúlveda, Borja
  • Esplandiú, María J.
[Description of methods used for collection/generation of data] - Experimental UV-VIS spectroscopy (Figure_3a.opju). Data acquired with a Cary 4000 spectrophotometer without data processing. - Experimental Photoluminescence spectroscopy (Figure_3b.opju): Data acquired with a Horiba T64000 spectrometer without data processing - Experimental Raman spectroscopy (Figure_3c.opju): Data acquired with a Horiba T64000 spectrometer without data processing - Experimental Diffraction spectroscopy (Figure_3d.opju): Data were acquired using a Malvern PANanlytical X´pert Pro MDP, without data processing. - Experimental determination of the band-gap (Figure_S3a.opju and Figure_S3b.opju): Data were acquired using UV-VIS diffuse reflectance spectroscopy (Cary 4000 spectrophotometer) in combination with Kubelka-Munk Analysis. - Experimental XPS data (Figure_4.opju and Figure S2.opju): XPS data: Data acquired with a SPECS PHOIBOS150 hemispherical analyser with a monochromatic X-ray source (1486.6 eV) operated at 300W. The overall experimental resolution, including the contribution from the hemispherical analyser (energy and angle) and the monochromatic X-ray source, is better than 0.6 eV for a pass energy of 20 eV. The reported binding energies have been determined with an error of ±0.1 eV and are referred to the Fermi level of the analyser, which is periodically determined by measuring the photoelectron energies from an atomically clean reference Au(111) sample. No correction to the measured binding energies has been applied to the spectra. - Experimental Data for photodegradation of Tetracycline (Figure_5a.opju, Figure_5b.opju, Figure_5c.opju Figure_5d.opju). The photocatalyst, either MoS2 or MoS2-Cu2O, (4 cm²), was immersed in a solution containing 5 ppm tetracycline (TC) (pH=6 and pH=8). The system was kept in the dark for 30 min to reach adsorption equilibrium. Afterward, the nanoreactors were irradiated with visible light using a warm LED (λ > 420 nm, max. 600 nm, 52 × 10⁻³ W·cm⁻²). The photoreaction progress was monitored via absorbance measurements using a Cary 4000 spectrophotometer and the Lambert-Beer law (supported files: Figure_data_support_photodegradation_TC-MoS₂_Cu₂O_pH6.opju, Figure_data_support_photodegradation_TC-MoS₂_pH8.opju, Figure_data_support_photodegradation_TC-MoS₂_pH6.opju). By observing the decay of TC absorbance over time from its initial value in presence of light, the variation in TC concentration was determined using the Lambert-Beer law, enabling the generation of the plots in Figs. 5a and 5c, as well as part of Fig. 5b. The rate constant of the photodegradation process was obtained by performing a linear fit of the plot Ln(C/C₀) vs. time using the Origin program for data processing. Additionally, the total organic content (TOC) analysis (Figure_5b.opju) was conducted using a TOC-VCSH instrument. - The experimental data corresponding to reactive oxygen species identification and photocatalyst recyclability of MoS2-Cu2O (Figure_6a.opju and Figure_6b.opju), were extracted by observing the changes of TC absorbance over time from its initial value with the spectrophotometer Cary 4000. In the case of Figure_6a, the experiments were performed in presence and in absence of ROS quenchers and in Figure_6b.opju, the same photocatalysts was re-used 10 times and evaluated its performance through the absorbance decay of TC in presence of light. - Experimental Data for photodegradation of Anatoxin (Figure_7a.opju, Figure_7b.opju, Figure_7c.opju). The MoS₂/Cu₂O photocatalyst (4 cm²) was immersed in a solution containing 20 ppm of Anatoxin-A. The system was kept in the dark for 30 min to reach adsorption equilibrium. Afterward, the nanoreactors were irradiated with visible light using a warm LED (λ > 420 nm, max. 600 nm, 52 × 10⁻³ W·cm⁻²). The anatoxin photodegradation was analyzed via high-performance liquid chromatography (HPLC) using a Waters Alliance 2795 instrument equipped with a PDA detector (Waters 2996) and a mass detector (Waters ZQ 2000). The changes of Absorbance of Anatoxin through HPLC measurements were collected in Figure_7a.opju. The degradation and kinetics evaluation was similar to the case of TC. The kinetics of the photodegradation process was obtained by performing a linear fit of the plot Ln(C/C₀) vs. time using the Origin program for data processing. Additionally, the total organic content (TOC) analysis (Figure_7b.opju) was conducted using a TOC-VCSH instrument., [Methods for processing the data] - XPS experimental data: CasaXPS software version 2.3.16 PR 1.6 - Experimental determination of the band-gap: data were processed for extracting the Kubelka-Munk function using Origin program tools. - Experimental Data for photodegradation of Tetracycline: the kinetics of the photodegradation reaction was evaluated by linear fits to the curves Ln(C/C0) vs time, using Origin software tools. - Experimental Data for photodegradation of Anatoxin-A: the HPLC measurements were smoothed with Origin program tools and the kinetics of the photodegradation reaction was evaluated by performing linear fits to the Ln(C/C0) vs time curves, also using Origin software tools., - The Ministerio de Ciencia e Innovación (MICIN). Grants DIN2021-011916, TED2021-129898B-C22, TED 2021-129898B-C21, PID 2020-116844RB-C21, PID2022-138588OB-C31, PID2022-138588OB-C32 and PID 2021-124568NB-I00 funded by NextGenerationEU and MICIU/AEI/10.13039/501100011033. - Departament de Recerca i Universitats, particularly the Departament d'Acció Climàtica, Alimentació i Agenda Rural, as well as the Fons Climàtic de la Generalitat de Catalunya (project 2023 CLIMA 00009 AGAUR) - CERCA program/Generalitat de Catalunya. - Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S (ICN2) and Maria de Maeztu Centres of Excellence program Grant CEX2023-001397-M (IMB-CNM), both funded by MCIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001397-M)., File List: Figure_3a.opju, Figure_3b.opju, Fig_4_right.opju; Fig_4_right.opju; Fig_4_inset_a_VBM.opju , Fig_4_inset_c_VBM.opju, Figure_5a.opju, Figure_5b.opju; Figure_5c.opju; Figure_5d.opju; Figure_6a.opju, Figure_6b.opju; Figure_7a.opju; Figure_7b.opju; Figure_7c.opju; Figure_S2.opju, Figure_S3a.opju; Figure_S3b.opju, Figure_data_support_photodegradtion_TC-MoS2_Cu2O_pH8.opju, Figure_data_support_photodegradtion_TC-MoS2_Cu2O_pH6.opju, Figure_data_support_photodegradtion_TC-MoS2_pH8.opju, Figure_data_support_photodegradtion_TC-MoS2_pH6.opju., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Production and characterization of deuterated bacterial nanocellulose

  • Muñoz Juan, Amanda
  • Diaz, Daniela
  • Marin Ortega, Judith
  • Murugarren, Nerea
  • Campoy Quiles, Mariano
  • Zamorano, Felipe
  • Guardiola, Consuelo
  • Pérez, Martín
  • Laromaine, Anna
“Production and characterization of deuterated bacterial nanocellulose“ CSIC digital repository collects the data published in RSC Applied Polymers in 2026 with the title “Engineering Deuterated Bacterial Cellulose via Biosynthesis for Neutron Applications” in accordance with the data availability statement of the journal. The project aimed to produce deuterated bacterial nanocellulose (dBNC) using the “film to film” protocol to reduce time and costs. The second objective was to characterize the deuterated bacterial nanocellulose films using various physicochemical techniques (FTIR, NIR, Raman, and SR-µFTIR). These techniques demonstrated the homogeneous incorporation of deuterium into the chemical structure of bacterial nanocellulose (BNC). Finally, natural and deuterated BNC were irradiated with neutrons to determine whether neutrons interact differently with deuterated BNC, paving the way for future applications of dBNC in neutron-based technologies. The data in this repository support the results presented in the publication and are organized in order of appearance: 1.-Film to Film protocol for bacterial cellulose deuteration. It summarizes the materials and steps to produce dBNC. 2.-Table1_Absorbance values. Absorbance values at each wavelength, the formula used to calculate, and the ratios (average and standard deviation). 3.-FTIR_Figure2A. FTIR spectra used for the graphic in Figure 2.A. Equipment and conditions are also described. 4. X-Ray_Figure2B. Data, equipment, and conditions for Figure 2B. 5.-NIR spectra_Figure2C. NIR spectra presented in Figure 2.C. The integrity area for each region used to calculate the crystallinity index (CRNIR) is also collected here. 6.-ZetaPotentialData. Measurements were performed to analyze the surface charge of BNC and dBNC fibers. 7.-Figure 3 RamanData. Folder with the data, equipment, and conditions used for the characterization of dBNC. 8.-SR-uFTIR_Figure4. Data, equipment, and conditions for SR-µFTIR data obtained at ALBA Synchrotron. 9.-Figure5. Neutron interaction data. Information about neutrons' interaction with BNC and dBNC, and the simulations performed at the HISPaNoS facility of the National Accelerator Center (CAN) in Sevilla. The data is presented in text files (.txt) and spreadsheets (.csv). We recommend using text editors (such as Notepad, Wordpad), MS Word or Standard PDF viewers for text files. Numerical data is presented in a spreadsheet (.csv), and we recommend using MS Excel software. The methodology is explained in detail in the accompanying publication. The equipment characteristics, software, and measurement conditions are included in each file., SR-µFTIR experiments were performed at the BL01-MIRAS beamline at ALBA Synchrotron with the collaboration of ALBA staff (ID:2020094625). We are grateful to Agustin Mihi (ICMAB-CSIC) for providing access to the spectrometer, supervising the measurements, and guiding in data analysis. This research was supported by the Spanish Ministry of Science and Innovation through the RTI2018-096273-B-I00 and PID2021-122645OB-100 projects, ‘Severo Ochoa’ Program for Center of Excellence in R&D (CEX2019-000917), the Generalitat de Catalunya (2017SGR765 grant). A.M.J. acknowledges the Ph.D. scholarship (FPU18/05190) in the framework of the Biotechnology Ph.D. program of the UAB. A.M.J. and A.L. participate in the Spanish National Research Council (CSIC) interdisciplinary platform for sustainable plastics towards a circular economy (SusPlast), the Aerogels COST ACTION (CA 18125), the EPNOE network, Conexión Nanomedicina del CSIC, and Red Nanocare 2.0. M.P. thanks funding from the European Union Horizon 2022 research and innovation program under the Marie Sklodowska-Curie grant agreement N◦ 101106191. C.G. acknowledges the Subvenciones 2022 SUB-08 program from the Spanish Nuclear Safety Council (CSN) and the Spanish government through the ‘María de Maeztu Unit of Excellence’ accreditation (CEX2023-001397-M). Finally, the authors would like to express their gratitude to ICMAB-CSIC and CNA for their technical support., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., "1.-Film to Film protocol for bacterial cellulose deuteration. 2.-Table1_Absorbance values. 3.-FTIR_Figure2A. 4. X-Ray_Figure2B. 5.-NIR spectra_Figure2C. 6.-ZetaPotentialData. 7.-Figure 3 RamanData. 8.-SR-uFTIR_Figure4. 9.-Figure5. Neutron interaction data. ", Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Replication Data for: "An artefact-resilient wide bandwidth bidirectional graphene neural interface" (V1)

  • Prokop, Michał
  • Masvidal Codina, Eduard
  • Baumann, Fanny
  • Rodríguez Dueñas, Jan
The ability to simultaneously record and modulate neural activity is critical for next-generation bidirectional neural interfaces aiming to enable adaptive neuromodulation therapies for neurological disorders. Active graphene transistor technologies are particularly promising for neural recordings, as they extend the ability to monitor brain activity at very low frequencies and support multiplexed operation for high-density neural interfaces. However, their limited charge injection capacity makes them unsuitable for stimulation. In this work, we present a bidirectional neural interface that combines nanoporous reduced graphene oxide (rGO) microelectrodes for high charge-injection focal stimulation and graphene solution-gated field-effect transistors (gSGFETs) for brain activity monitoring. Using scalable cleanroom microfabrication techniques, we monolithically integrate these two graphene-based technologies into fully flexible neural probes, leveraging their complementary functionalities within a single-device platform. We evaluate the performance of the hybrid devices both in saline and in vivo, with a particular focus on transistor performance during stimulation. Our results demonstrate that the recording capability of this bidirectional neural interface, including the monitoring of infraslow and local field potential activity, is not compromised during stimulation. This work highlights the potential of this hybrid neural interface for both basic neurophysiological and clinical translation use., European Union's Horizon Europe research and innovation programme. "MINIGRAPH" project. Grant number: 101070865. -- Swiss State Secretariat for Education, Research and Innovation. Grant number: 2200163. -- Severo Ochoa Centres of Excellence and Maria de Maeztu Units of Excellence programme. Grant number: CEX2021-001214-S, CEX2023-001397-M, 10.13039.501100011033, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001397-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Determining the intrinsic electronic structure of radiation-sensitive surfaces with X-ray photoemission spectroscopy: Nafion films as a case study

  • Fraxedas, J.
  • Esplandiú, María J.
  • Muntada, Olga
  • Perez Murano, Francesc X.
  • Céolin, D.
  • Rueff, J. P.
[Description of methods used for collection/generation of data] Data acquired with a PHI-Genesis system from ULVAC-PHI located at ICN2 and a high-kinetic-energy Scienta EW 4000 hemispherical analyser installed on the HAXPES endstation of the GALAXIES beamline of the French national synchrotron facility SOLEIL (France)., [Methods for processing the data] CasaXPS software version CasaXPS - 2.3.27 PR5.6, Determining the intrinsic electronic structure of radiation-sensitive polymer surfaces with X-ray photoelectron spectroscopy (XPS) requires careful optimization. Prior to any consistent characterization, evaluating radiation-induced damage is mandatory to establish the optimal operating parameters for the specific XPS instrument. In this work, we present a systematic methodology to address this challenge using Nafion, a widely utilized polymer containing highly radiation-sensitive sulfonate groups. Specifically, we focus on the capacity of Nafion thin films to efficiently capture divalent metal cations, such as Cd2+ and Pb2+, which are common toxic contaminants in drinking water. Given that Nafion films offer promising potential for rapid water purification and environmental remediation, a detailed analysis is essential to elucidate the ion-exchange mechanisms operating at the Nafion/water interface., - European Union’s Horizon 2020 research and innovation programme, under grant agreement No. 101007417 NFFA-Europe Pilot. - Spanish Ministry of Science and Innovation (MCIN) under contract No. PID2021-124568NB-I00. - The ICN2 is funded by the CERCA program/Generalitat de Catalunya. - The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, grant CEX2021-001214-S, funded by MCIN/AEI. - María de Maeztu grant CEX2023-001397-M financed by MICIU/AEI/10.13039/501100011033. - Generalitat de Catalunya through the 2021-SGR-00644 project., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001397-M)., File List: Fig_03a.opju; Fig_03b.opju; Fig_04a.opju; Fig_04b.opju; Fig_04c.opju; Fig_05a.opju; Fig_05b.opju; Fig_05c.opju; Fig_06.opju; Fig_07a.opju; Fig_07b.opju; Fig_S02.opju; Fig_S03.opju; Fig_S04.opju; Fig_S05.opju; Fig_S06.opju; Fig_S07.opju; Fig_S08.opju, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary Information: A novel approach to micro-fabricated thermoelectric generators with SrTiO3

  • Santander, Joaquin
  • Martín Fernández, Íñigo
  • Carbonell, Carlos
  • Rodríguez-Iglesias, Alex
  • Fuentes Rodríguez, Laura
  • Fernández-Regúlez, Marta
  • Abad Muñoz, Llibertat
  • Lopeandía, Aitor
  • Chatterjee, Arindom
  • Pryds, Nini
  • Fonseca, Luis
  • Salleras Freixes, Marc
We present a versatile microfabricated platform to assess thermoelectric performance of diverse thin films, enabling sustainable energy harvesting solutions for IoT and autonomous devices., The growing demand for autonomous, sustainable, and delocalized power sources for low-power-consuming electronic devices is driving a significant research effort on energy harvesting technologies. Among these, micro-thermoelectric generators (µTEGs) emerge as an appealing solution because of the abundance of residual latent heat sources. This paper proposes an approach to combine high-performance thermoelectric oxides with Si-based µTEGs, leveraging the miniaturization and high-density integration of CMOS-like technologies. The approach is applied to the integration of niobium-doped strontium titanate (Nb:STO) thin films on Si-based planar µTEG structures. The Nb:STO-based µTEG achieves a specific power density Γ = 0.36 nW·cm−2·K−2 under controlled temperature gradients, which is below state-of-the-art performance probably due to lower electrical conductivity from polycrystalline growth. When the chips were tested under realistic operating conditions – placed on a hot surface at 175°C – a maximum power output of p = 0.07 nW was obtained. Nonetheless, by implementing a technological solution for thermal dissipation, the temperature gradient across the thermoelectric material improved by a factor of 110, resulting in a significantly higher extracted power of p = 7.75 nW., The work was supported by the Agencia Estatal de Investigación [CEX2023-001397-M]; Agencia Estatal de Investigación [PID2022-142003OB-C22]; Agència de Gestiód’Ajuts Universitaris ide Recerca [2021 SGR 00497]; European Regional Development Fund [FICTS2019-02–40]; European Social Fund Plus [RYC2022-037016-I]; European Social Fund Plus [RYC2022-038370-I]; H2020 Future and Emerging Technologies [824072]., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001397-M), Peer reviewed