Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Microstrip Line loaded with Series Gap and Dumbbell Defect-Ground-Structure (DB-DGS) Resonator for Highly Sensitive Sensing Based on Resonance/Antiresonance, Application to Humidity Measurements

  • Kurniawati, Nazmia|||0000-0002-0686-8754
  • Vélez, Paris|||0000-0001-6502-5987
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Su, Lijuan|||0000-0002-4753-9340
  • Canalias, Xavier|||0009-0002-6473-7514
  • Martín, Ferran|||0000-0002-1494-9167
A new planar structure for the implementation of highly sensitive single-frequency microwave sensors is proposed. The key aspect to obtaining high sensitivity is to generate closely spaced resonance and antiresonance frequencies, achieved by means of a microstrip line with a series gap etched on top of a transversely oriented dumbbell defect-ground-structure (DB-DGS) resonator, the sensitive element. By this means, both the magnitude and the phase of the transmission coefficient exhibit a high phase slope between such frequencies. The result is a high sensitivity of either the magnitude or the phase of the transmission coefficient at the operating frequency with the dielectric constant of the environment surrounding the DB-DGS resonator. Advantages of the proposed device are (i) size and simplicity and (ii) isolation between the analyte (or material under test -MUT) and the line strip. Two sensors with different DB-DGS geometry are reported to validate the proposed approach. Using the phase as the main output variable, the maximum sensitivity in one of the prototypes is found to be 88.7° per unit of dielectric constant variation. This sensor has been applied to relative humidity (RH) measurements by using a functional film of polyvinyl alcohol (PVA) deposited on top of the sensing DB-DGS resonator. The average sensitivity in this case is 0.33°/% (note that RH is given in %).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Transmission-mode phase-variation microwave sensor applied to highly sensitive micrometer-scale thickness measurements

  • Canalias, Xavier|||0009-0002-6473-7514
  • Vélez, Paris|||0000-0001-6502-5987
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Su, Lijuan|||0000-0002-4753-9340
  • Kurniawati, Nazmia|||0000-0002-0686-8754
  • Martín, Ferran|||0000-0002-1494-9167
This article proposes a highly sensitive two-port single-frequency permittivity sensor operating in transmission. The device consists of a shunt-connected short-circuited quarter-wavelength resonator (the sensing element) sandwiched between a symmetric configuration of cascaded impedance inverters with alternating high and low impedance. The output variable of the sensor is the phase of the transmission coefficient at the operating frequency, which is highly sensitive to variations in the permittivity of the medium surrounding the sensing resonator. In the proposed two-port sensor, the feeding (harmonic) signal and the output signal do not share the same port, which facilitates retrieving the output variable in scenarios where a vector network analyzer (VNA) cannot be used. The maximum sensitivity in the reported prototype is Smax= -63.94° per unit of dielectric constant variation, whereas the figure of merit (FoM), or ratio between the maximum sensitivity and the area of the sensing region expressed in squared wavelengths, is FoM.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A Versatile Reflective-Mode Phase-Variation Microwave Sensor Based on a Dumbbell Defect-Ground-Structure (DB-DGS) Resonator for Solid and Liquid Characterization

  • Kurniawati, Nazmia|||0000-0002-0686-8754
  • Vélez, Paris|||0000-0001-6502-5987
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Su, Lijuan|||0000-0002-4753-9340
  • Canalias, Xavier|||0009-0002-6473-7514
  • Sisó, Gerard|||0000-0003-2576-6558
  • Martín, Ferran|||0000-0002-1494-9167
This article presents a single-frequency planar microwave sensor designed for characterizing solid and liquid samples. The sensor operates in reflective-mode one-port configuration utilizing a microstrip line with a series inductive strip terminated with a transversely oriented dumbbell defect-ground-structure (DB-DGS) resonator (etched in the ground plane), the sensing element. The output variable is the phase of the reflection (RX) coefficient at a specific (operating) frequency. The device is modeled by a lumped circuit consisting of a parallel resonator (accounting for the DB-DGS resonator) series connected to an inductor and a parasitic capacitor. This configuration enables the generation of a steep phase slope in the RX coefficient at the operating frequency, which is essential for achieving high sensitivity. The sensor can be applied to the detection of small variations in the permittivity of the environment surrounding the sensing element in the vicinity of a reference (REF) value, where such REF value can be selected at wish by conveniently tuning the operating frequency. To demonstrate the versatility of the proposed device, three different scenarios are considered: 1) dielectric constant of solid samples measurement; 2) ethanol concentration in deionized (DI) water determination; and 3) detection of water/detergent in wine. The maximum sensitivity achieved for the dielectric characterization of solids is -382.44° per unit of dielectric constant. For liquid sensing, the sensor exhibits sensitivities of 9°/% for ethanol concentration in water and 0.88°/% for detecting water/detergent mixtures in wine. Despite the similar electromagnetic characteristics of water/detergent and wine, the proposed sensor can resolve a volume fraction (percentage of water/detergent in wine) as little as 2.5%, demonstrating high sensitivity. For the mixture of ethanol and DI water, the sensor is capable of detecting a concentration of 1% of ethanol.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reflective-mode phase-variation submersible sensor for liquid characterization

  • Su, Lijuan|||0000-0002-4753-9340
  • Vélez, Paris|||0000-0001-6502-5987
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Martín, Ferran|||0000-0002-1494-9167
A one-port reflective-mode microwave submersible sensor based on an open-ended step-impedance microstrip line configuration, operating at a single frequency, useful for the dielectric characterization of liquids and the measurement of liquid composition in binary mixtures, is proposed in this article. The sensor constitutes two parts, namely, the microwave module, including the sensitive region, and a 3-D-printed case (made of polylactic acid-PLA), necessary for sealing, thus preventing from any liquid leakage to the nonsensing regions of the microwave module. To enhance the sensitivity, the open-ended line Section of the microwave module, i.e., the sensing region in contact with the liquid under test (LUT), is a quarter wavelength microstrip line with high impedance. Thus, the phase of the reflection coefficient is the output variable, highly dependent on the input variable-the dielectric constant of the LUT placed directly above the sensing region. In order to validate the sensing structure, a prototype device has been designed and fabricated. The average sensitivity to variations in the concentration of ethanol in solutions of deionized (DI) water is 1.22°/%, and sensor resolution is 2%. The fabricated sensor is resistant to liquid leakage, and therefore, it can be completely submerged for measuring purposes, acting as an effective measuring probe.