Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 45
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mesoporous nanocomposite sensors based on Sn1-xCexO2-&amp, #948, metastable solid solution with high percentage of Ce3+ valence state for selective detection of H2 and CO

  • Somacescu, Simona
  • Osiceanu, Petre
  • Calderon-Moreno, Jose Maria
  • Navarrete Algaba, Laura
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Mesoporous nanocomposite materials based on Sn1-xCexO2-delta (x = 0.1; 0.2; 0.3) solid solution were synthesized by a hydrothermal synthesis route using CTAB-ionic surfactant-as template, for testing their sensing properties for selective detection of H-2 and CO. The samples were investigated with respect to their structural composition, nanocrystallitesizes, morphology, texture, molecular and macroscopic surface properties by XRD, Raman, SEM-EDX, HRTEM and STEM-EDX mapping, BET analysis and XPS, as a function of the ceria content incorporated in the mentioned solid solution. A high percentage of Ce3+ valence state (similar to 40%) was determined by XPS for the Sn0.9Ce0.1O2-delta surface sample. A clear morphology of dispersed nanoparticles, with uniform grain sizes around 5 nm was revealed by HRTEM, while the organization of the nanoparticles in a mesoporous architecture was confirmed by BET analysis. Gas sensing investigations revealed the role of the mesoporous architectures, solid solution phases, Ce3+ oxidation state relative concentration on the increase in sensitivity for the selective detection of H-2 and CO. (C) 2013 Elsevier Inc. All rights reserved., S. Somacescu acknowledges the Sectorial Operational Programme Human Resources Development (SOP HRD) financed from the European Social Fund and by the Romanian Government under the contract number POSDRU/89/1.5/S/63700. Further financial support by the Spanish Ministry for Science and Innovation (ENE2011-24761, CSD-2009-0050 and SEV-2012-0267), EU (ERDF) and Romanian Government infrastructure POS-CCE O 2.2.1 project INFRANANOCHEM - no. 19/2009 are kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of Novel Reinforced Cation Exchange Membranes for Microbial Fuel Cells

  • Kamaraj, Sathish-Kumar
  • Mollá Romano, Sergio
  • Poggi-Varaldo, H. M.
  • Solorza-Feria, Omar
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
This work has been focused on the synthesis and characterization of different blended membranes SPEEK-35PVA (Water), SPEEK-35PVA (DMAc) prepared by casting and nanofiber-reinforced proton exchange membranes Nafion-PVA-15, Nafion-PVA-23 and SPEEK/PVA-PVB. The two first reinforced membranes were made up of Nafion (R) polymer deposited between polyvinyl alcohol (PVA) nanofibers. The last composite membrane is considered because the PVA is a hydrophilic polymer which forms homogeneous blends with SPEEK suitable to obtain high proton conductivity, while the hydrophobic PVB can produce blends in a phase separation morphology in which very low water uptake can be found. The synthesized membranes showed an outstanding stability, high proton conductivity, and enhanced mechanical and barrier properties. The membranes were characterized in single chamber microbial fuel cells (SCMFCs) using electrochemically enriched high sodic saline hybrid H-inocula (Geobacter metallireducen, Desulfurivibrio alkaliphilus, and Marinobacter adhaerens) as biocatalyst. The best performance was obtained with Nafion-PVA-15 membrane, which achieved a maximum power density of 1053 mW/m(3) at a cell voltage of 340 mV and displayed the lowest total internal resistance (Rint approximate to 522 Omega). This result is in agreement with the low oxygen permeability and the moderate conductivity found in this kind of membranes. These results are encouraging towards obtaining high concentrated sodic saline model wastewater exploiting MFCs., The authors wish to thank SEP and CINVESTAV-IPN for granting a PhD fellowship to one of the authors (KSK). We gratefully acknowledge the financial support of the National Council of Science and Technology, CONACYT, under grant FOINS 75/2012 and the Ministry of Science and Innovation of Spain through the project SP-ENE-20120718 and Support Programme for Research and Development of the Polytechnic University of Valencia through the project ref. 24761. Dr O. Solorza thanks Plan de Movilidad e Internalizacion Academica VLC/CAMPUS fellowship at the Universidad Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Oxygen diffusion and Edema with Modern Scleral Rigid Gas Permeable Contact Lenses

  • Compañ Moreno, Vicente|||0000-0001-8233-7472
  • Oliveira, Cristina
  • Aguilella-Arzo, Marcel
  • Mollá Romano, Sergio
  • Peixoto-de-Matos, Sofia C.
  • Gonzalez-Meijome, Jose M.
PURPOSE. We defined the theoretical oxygen tension behind modern scleral contact lenses (CLs) made of different rigid gas permeable (RGP) materials, assuming different thickness of the tear layer behind the lens. A second goal was to show clinically the effect of the postlens tear film on corneal swelling. METHODS. We simulated the partial pressure of oxygen across the cornea behind scleral CLs made of different lens materials (oxygen permeability Dk, 75-200 barrer) and different thickness (T-av, 100-300 mu m). Postlens tear film thicknesses (Tpost-tear) ranging from 150 to 350 mu m were considered. Eight healthy subjects were fitted randomly with a scleral lens with a thin and a thick postlens tear layer in two different sessions for a period of 3 hours under open-eye conditions. RESULTS. The CLs with less than 125 barrer of Dk and a thickness over 200 mu m depleted the oxygen availability at the lens-cornea interface below 55 mm Hg for a postlens tear film of 150 mu m. For a postlens tear film thickness of 350 mu m, no combination of material or lens thickness will meet the criteria of 55 mm Hg. Our clinical measures of corneal edema showed that this was significantly higher (P < 0.001, Wilcoxon signed ranks test) with the thicker compared to the thinner Tpost-tear (mean +/- SD, 1.66 +/- 1.12 vs. 4.27 +/- 1.19%). CONCLUSIONS. Scleral RGP CLs must be comprised of at least 125 barrer of oxygen permeability and up to 200 mu m thick to avoid hypoxic effects even under open eye conditions. Postlens tear film layer should be below 150 mu m to avoid clinically significant edema., Supported by the Ministerio de Educacion y Ciencia (MEC) through Project ENE2011-24761, and by FEDER through the COMPETE Program and by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Project PEST-C/FIS/UI607/2011. The authors alone are responsible for the content and writing of the paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic Surface Promotion of Composite Cathodes in Protonic Ceramic Fuel Cells

  • Solis Díaz, Cecilia
  • Navarrete Algaba, Laura
  • Bozza, Francesco
  • Bonanos, Nikolaos
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Composite cathodes based on an electronic conductor and a protonic conductor show advantages for protonic ceramic fuel cells. In this work, the performance of a La5.5WO11.25-delta/La0.8Sr0.2MnO3+delta (LWO/LSM) composite cathode in a fuel cell based on an LWO protonic conducting electrolyte is shown and catalytically improved. The limiting processes were first unambiguously associated to surface steps, and the reaction rate was significantly enhanced by 1) tailoring the catalytic activity through electrode surface impregnation with intrinsically catalytic nanoparticles and 2) electrochemical activation of surface species by imposing a net current through the electrode., Funding from the European Union (FP7 Project EFFIPROGrant Agreement 227560 and FP7 Project ELECTRAGrant Agreement 621244) and the Spanish Government (ENE2011-24761 and SEV-2012-0267) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing oxygen permeation through hierarchically-structured perovskite membrane elaborated by freeze-casting

  • Gaudillere, Cyril Christian
  • García Fayos, Julio
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Innovative asymmetric oxygen-transport membrane architectures were prepared by combining freeze-casting and film deposition techniques. Freeze-casting enabled to optimize the gas transport through the support by creating a hierarchical porosity while a dense top-layer of 30 µm was coated over this support by screen printing. The versatility of this technique was demonstrated by preparing highly porous bodies made of fast ionic conductors, e.g. perovskites and doped ceria fluorites, with a large number of applications in catalysis, electrochemistry and gas separation. Permeation tests using an all- La0.6Sr0.4Co0.2Fe0.8O3-d; asymmetric membrane proved the beneficial effect of such porous supports over the O2 fluxes with a maximum value of 6.8 ml.min-1.cm-2 at 1000 ºC, markedly above the results achieved so far with conventional preparation techniques. Gas permeance study through the porous freeze-cast support showed that the particular pore structure allows the gaseous transport resistance to be minimized. The related pressure drop is found to be very low in comparison with conventional porous supports, e.g. tape-cast supports, with for example only 0.59 bar.mm -1 with argon at 800 ºC for an inlet flow of 400 mL.min -1.cm-2. Finally, the stability of the asymmetric membrane has been evaluated under CO 2atmosphere during 48 hours and at 900ºC. The membrane is found to be stable without deactivation nor decrease in the O2 permeation flux., Funding from the Spanish Government (ENE2011-24761 and SEV-2012-0267 grants) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced H2 Separation through Mixed Proton Electron Conducting Membranes Based on La5.5W0.8M0.2O11.25 d

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Seeger, J.
  • Roitsch, S.
  • Ivanova, M.
  • Meulenberg, Wilhem Albert
La5.5WO11.25- is a proton-conducting oxide that shows high protonic conductivity, sufficient electronic conductivity, and stability in moist CO2 environments. However, the H-2 flows achieved to date when using La5.5WO11.25- membranes are still below the threshold for practical application in industrial processes. With the aim of improving the H-2 flow obtained with this material, La5.5WO11.25- was doped in the W position by using Re and Mo; the chosen stoichiometry was La5.5W0.8M0.2O11.25-. This work presents the electrochemical characterization of these two compounds under reducing conditions, the H-2 separation properties, as well as the influence of the H-2 concentration in the feed stream, degree of humidification, and operating temperature. Doping with both Re and Mo enabled the magnitude of H-2 permeation to be enhanced, reaching unrivaled values of up to 0.095mLmin(-1)cm(-2) at 700 degrees C for a La5.5W0.8Re0.2O11.25- membrane (760m thick). The spent membranes were investigated by using XRD, SEM, and TEM on focused-ion beam lamellas. Furthermore, the stability in CO2-rich and H2S-containing atmospheres was evaluated, and the compounds were shown to be stable in the atmospheres studied., Financial support from the Spanish Ministry for Science and Innovation (Grants JAE-Pre 08-0058, ENE2011-24761, CSD-2009-0050 and SEV-2012-0267) and the Helmholtz Association of German Research Centers through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Outstanding hydrogen permeation through CO2-stable dual phase ceramic membranes

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Solis Díaz, Cecilia
  • Kjolseth, C.
[EN] Mixed electronic-and protonic-conducting composites made up of physical mixtures of La5.5WO11.25-delta-La0.87Sr0.13CrO3-delta (LWO-LSC) have been evaluated as H-2 separation membranes for operation at temperatures greater than 550 degrees C. The mixture of these two ion-conducting phases led to non-linear synergetic effects; i.e. unexpected enhancement of the total conductivity and well-balanced ambipolar conductivity, resulting in appealing H-2 permeation fluxes through robust ceramic membranes. The preparation, primary characterization, H-2 permeation and stability studies of various composites is presented. Mixing LWO and LSC phases makes it possible (1) to improve the LSC sintering behavior and to achieve very high membrane densities and (2) to obtain compounds with high total conductivity, higher than that shown for LWO and LSC, separately. The highest permeation rate is achieved for the 50 vol%-LWO-LSC membrane, though other composite compositions showed higher total conductivity. Moreover, the influence on the H-2 permeation of the composite composition, the humidification of gas streams, temperature and the use of various catalytic coatings on the membrane surface is evaluated. The nature of the transport mechanism is investigated by the permeation studies using deuterium tracers. The H-2 permeation rates reported in this investigation for a 370 mu m thick 50 vol%-LWO-LSC membrane, e.g. 0.15 mL min(-1) cm(-2) at 700 degrees C, are the highest reported values, up to date, for any bulk mixed protonic-electronic membranes. The H-2 permeation magnitude achieved at moderate temperatures along with the proven stability in CO2-rich atmospheres are firm steps towards the future application of this type of membrane for industrial processes., Financial support by the Spanish government (ENE2011-24761, CSD-2009-0050, and SEV-2012-0267) and the Helmholtz Association of German Research Centers through the portfolio topic MEM-BRAIN is kindly acknowledged. Protia acknowledges financial support from the Research Council of Norway (RCN) under the Gassmaks program ICOR (201418). The authors are indebted to M. Fabuel for sample preparation. The support of the Servicio de Microscopia Electronica of the Universidad Politecnica de Valencia is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bulk transport and oxygen surface exchange of the mixed ionic-electronic conductor Ce1 xTbxO2-d (x=0.1, 0.2, 0.5)

  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Yoo, C.Y.
  • Bouwmeester, H.J.M
Bulk ionic and electronic transport properties and the rate of oxygen surface exchange of Tb-doped ceria have been evaluated as a function of Tb concentration, aiming to assess the potential use of the materials as high-temperature oxygen-transport membranes and oxygen reduction catalysts. The materials were synthesized by the co-precipitation method. Cobalt oxide (2 mol%) was added in order to improve sinterability and conductivity. The materials were studied by means of X-ray diffraction (XRD), temperatureprogrammed desorption (TPD), thermogravimetry (TG), DC-conductivity and UV-vis spectrophotometry. The results indicate that the extent of mixed ionic electronic conductivity is a function of temperature and can be tuned by modifying the Tb- (and Co-doping) concentration. Low Tb-content materials (x ¿ 0.1 and 0.2) are predominant ionic conductors, but the materials with 50 mol% Tb show both p-type electronic and ionic conductivity. The enhanced electronic conduction in Ce0.5Tb0.5O2 d is associated with narrowing of the band gap upon doping ceria with Tb. In addition, the surface chemistry of the samples was investigated by means of X-ray photoelectron spectroscopy (XPS) and pulse isotopic exchange (PIE). The surface exchange rate is found to increase on increasing the level of Tb doping. The highest surface exchange rates in this study are found for materials doped with 50 mol% Tb., Funding from the Spanish Government (BES-2009-015835, ENE2011-24761 and SEV-2012-0267 grants) and Helmholtz Association (MEM-BRAIN Portfolio) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mixed Proton-Electron Conducting Chromite Electrocatalysts as Anode Materials for LWO-Based Solid Oxide Fuel Cells

  • Solis Díaz, Cecilia
  • Vert Belenguer, Vicente Bernardo
  • Escolástico Rozalén, Sonia
  • Roitsch, Stefan
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Chromite anodes in LWO PC-SOFC: Chemically compatible LSCN/LWO symmetric cells show the high protonic conductivity and p-type electronic conductivity of LSCN in reducing atmospheres. This allows to avoid blending with other protonic or electronic materials and enlarges the surface area., Funding from the Spanish Government (ENE2011-24761 grant) and the European Union (FP7 Project EFFIPRO, Grant Agreement 227560) is acknowledged. The authors are indebted to S. Jimenez and M. Fabuel for sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solid state transport and hydrogen permeation in the system Nd5.5W1-xRexO11.25-d

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Somacescu, Simona
Nd5.5WO11.25-delta is a mixed proton-electron conducting oxide, which shows an important mixed conductivity and stability in moist CO2 environments. However, the H-2 fluxes obtained with this material are not high enough in order to apply them as H-2 separation membranes in industrial applications. Re6+ cation presents similar ionic radii than W6+ and Re6+ can be reduced to different oxidation states under the operating conditions typical for hydrogen membrane separation. This fact leads to the improvement of the electronic conductivity and produce. the generation of oxygen vacancies with the subsequent increase in the ionic conductivity. This work presents the synthesis as nanosized powders as well as the structural and electrochemical characterization of mixed conducting materials based on the system Nd5.5W1-xRexO11.25-delta where x = 0, 0.1, 0.5 and 1. The evolution of the crystalline structure and the shrinkage behavior are studied as a function of the sintering temperature. Total conductivity in reducing and oxidizing environments is studied systematically for samples sintered at 1350 degrees C. The H/D isotopic effect and the hydration influence are also analyzed by means of DC-electrochemical measurements. H-2 permeation is carried out for the selected compound, Nd5.5W0.5Re0.5O11.25-delta, in the range of 700-1000 degrees C, obtaining a peak H-2 flux value of 0.08 mL.min(-1).cm(-2). The reduction of the Re cation in this compound under reducing conditions is investigated by TPR and XPS. Finally, the stability of this material under CO2-rich gas stream was evaluated by measuring H-2 permeation using a CO2 containing atmosphere as sweep gas., Financial support by the Spanish Government (Grant Nos. JAE-Pre 08-0058, ENE2011-24761, CSD-2009-0050, and SEV-2012-0267) and the Helmholtz Association of German Research Centers through the portfolio topic MEM-BRAIN is kindly acknowledged. The authors are indebted to S. Jimenez for sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Oxygen permeation improvement under CO2-rich environments through catalytic activation of hierarchically-structured perovskite membranes

  • Gaudillere, Cyril Christian
  • García Fayos, Julio
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Catalytic activation of a highly porous La0.6Sr0.4Co0.2Fe0.8O3- (LSCF) freeze-cast asymmetric membrane has been realized by screen-printing a 30m thick LSCF porous layer over the dense top layer of the asymmetric membrane. Membrane activation leads to a noticeable improvement of the oxygen permeation flux (JO(2)) in the low-temperature region (<700 degrees C), at which catalytic gas exchange is the most limiting process. An enhancement of 54% in JO(2) is obtained (JO(2)=0.17mLmin(-1)cm(-2)) in air at 600 degrees C thanks to the addition of the LSCF catalytic porous layer, whereas the maximum oxygen permeation is reached when pure oxygen is fed to the membrane at 1000 degrees C with a high value of 16.3mLmin(-1)cm(-2). The most appealing effect of the catalytic layer is its protective feature under oxycombustion conditions, that is, under a CO2-rich atmosphere at high temperature. Indeed, the oxygen permeation drop in the presence of CO2 is significantly lower in the presence of a catalytic porous layer. Interestingly, the full recovery of JO(2) flux after CO2 removal in the sweep flux evidences the absence of a carbonation process. Finally, the stability of the functionalized membrane was evaluated at 850 degrees C and under a 50% CO2-containing atmosphere; this revealed a linear degradation rate for oxygen permeation of 4.27x10(-2)mLmin(-1)cm(-2) per day., Funding from the Spanish Government (ENE2011-24761 and SEV-2012-0267 grants) and EC (FP7 GREEN-CC Grant Agreement 608524) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polymer blends of SPEEK for DMFC application at intermediate temperatures

  • Mollá Romano, Sergio
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] Sulfonated poly(ether–ether–ketone) materials (SPEEK) are good proton conductors at high degrees of sulfonation and appropriate for high temperature application due to their glass transition temperatures around 200 °C. Nevertheless, high degrees of sulfonation result in excessive swelling and dissolution of the membranes in hot water, preventing their potential use for direct methanol fuel cells. One possible remedy is their chemical stabilization. For this reason, blends of SPEEK with PVA (polyvinyl alcohol), a hydrophilic polymer, were prepared and tested. Above 25 wt% PVA, the membranes were found to be mechanically stable in boiling water, with acceptable proton conductivities but excessive methanol permeabilities. On the other hand, blends of SPEEK with a hydrophobic polymer, PVB (polyvinyl butyral), resulted in extremely stable membranes in boiling water above a 30 wt% PVB content. Those membranes presented excellent mechanical and methanol barrier properties while proton conductivities were very low. A discussion of possible ways to make optimal use of these materials is presented., This research has been funded in the frame of Support Programme for Research and Development of the Polytechnic University of Valencia and the Ministry of Science and Innovation through the projects: 24761 and SP-ENE-20120718, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improvement of transport properties and hydrogen permeation of chemically-stable proton conducting oxides bases on the system BaZr1-x-yYxMyO3-&amp, #948

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Ivanova, Mariya
  • Solis Díaz, Cecilia
  • Roitsch, Stefan
  • Meulenberg, Wilhem Albert
[EN] The structural and transport properties as well as the chemical stability of a series of proton-conducting oxides based on yttrium-doped barium zirconate were investigated. Specifically, Pr-, Fe- and Mn-doped BaZr1-x-yYxMyO3-delta compounds were prepared by solid state reaction. The compound exhibiting the highest total and protonic conductivity at elevated temperatures under reducing atmospheres was BaZr0.8Y0.15Mn0.05O3-delta. Temperature-programmed reduction experiments revealed a particular redox behavior related to the Mn-species under selected conditions. The hydrogen permeation was thoroughly studied as a function of the temperature, hydrogen concentration and the humidification degree in the sweep gas. Moreover, the transient processes induced by alternate step changes in the humidification degree of the sweep gas were analysed. The highest steady hydrogen evolution flow exceeded 0.03 ml min(-1) cm(-2) (0.9 mm-thick membrane) at 1000 degrees C for the humidified sweep gas. The stability of BaZr0.8Y0.15M0.05O3-delta under operation-relevant atmospheres (CO2-rich reducing atmosphere at high temperature) was tested using different techniques ( X-ray diffraction (XRD), Raman, SEM, TEM and TG) and the results showed that this material is stable even when exposed to 115 ppm H2S., Financial support by the Spanish Ministry for Economics and Competitiveness (JAE-Pre 08-0058, ENE2008-06302 and ENE2011-24761 grants) and the Helmholtz Association of German Research Centers through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged. Dr M. Ivanova thanks the Northern European Innovative Energy Research Program N-INNER (grant no. 09- 064274) and the German Federal Ministry of Education and Research (BMBF) for supporting the N-INNER Project ‘‘Novel High Temperature Proton and Mixed-Proton Electron Conductors for Fuel Cells and H2-separation membranes’’ (Contract 03SF0330).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nd5.5W1xUxO11.25-delta system: Electrochemical characterization and hydrogen permeationstudy

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
This work presents the structural and electrochemical characterization of mixed conducting materials based on the system Nd5.5W1-xUxO11.25-delta where x = 0.1, 0.5 and 1. The evolution of the crystalline structure is studied as a function of the sintering temperature and the U content in the oxide lattice. The influence of hydration and pO(2) as well as the H/D isotopic effect are studied by DC-electrochemical measurements under reducing environments. Hydrogen permeation is carried out for Nd5.5WO11.25-delta and Nd5.5W0.9U0.O-1(11.25-delta) compounds in the range from 650 to 750 degrees C. Finally, stability of the developed materials at 800 degrees C is evaluated in contact with CO2-rich gas streams. This work completes previous reported studies On Ln(6-x)WO(12-y) based materials that show the possibility of engineering the conductivity properties of the Ln(6-x)WO(12-y) just by doping strategies. (C) 2015 Published by Elsevier B.V, Financial support by the Spanish Government (Grants ENE2011-24761, CSD-2009-0050 and SEV-2012-0267) and the Helmholtz Association of German Research Centers through the portfolio topic MEM-BRAIN is kindly acknowledged. The authors are indebted to M. Fabuel for sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Freeze-casting: Fabrication of highly porous and hierarchical ceramic supports for energy applications

  • Gaudillere, Cyril Christian
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The manufacture of structured ceramic porous support knows an important boom since more than a decade with the development of new shaping techniques. Among the most promising ones, the freeze-casting also called Ice-Templating allows the fabrication of ceramic parts exhibiting high porosity (>50%) and vertically aligned and hierarchically organized pores. Such structures were firstly conceived for biomedical applications like bone substitute and tissue engineering, but the distinctive features of freeze-cast structures have attracted the attention of diverse scientific fields, especially in high temperature ceramic based energy production systems. Indeed, technologies like (a) Solid Oxide Fuel Cell (SOFC) and Electrolyser Cell (SOEC), (b) gas separation (O-2, H-2) by asymmetric supported membranes based on mixed ionic and electronic conductors (MIEC) or hydrogen-permeable metals, and (c) Catalytic Membrane Reactor (CMR) systems present a porous component in their physical structure. This latest, presenting a tortuous pathway for gas access and as a consequence, a high transport limitation, is known to be a limiting component for the operation at high flow streams that would enable to reach industrial target. The aim of this paper is to give an overview of the freeze-casting ceramic shaping method and to show how its implementation could be useful for several energy applications where key components comprise a porous scaffold. A detailed presentation of the freeze-casting process and of the characteristics of the resulting porous parts is firstly given. The characteristic of freeze-cast parts and the drawbacks of conventional porous scaffolds existing in energy applications are drawn in order to highlight the expected beneficial effect of this new shaping technique as possible substitute to the conventional ones. Finally, a review of the state of the art freeze-cast based energy applications developed up to now and expected to be promising is given to illustrate the large perspectives opened by the implementation of the freeze-casting of ceramics for energy fields. Here we suggest discussing about the feasibility of incorporate freeze-cast porous support in high temperature ceramic-based energy applications. (C) 2016 SECV. Published by Elsevier Espana, S.L.U., [ES] La fabricación de soportes cerámicos porosos a través de nuevas técnicas de conformado es clave en el desarrollo de nuevos dispositivos en el sector energético y de la ingeniería química. La técnica de freeze-casting (colado por congelación) permite obtener componentes cerámicos muy bien sinterizados, con muy alta porosidad y poros con formas concretas. Los poros se orientan de manera que las propiedades de transporte de fluidos a su través son óptimos con respecto a otros tipos de estructuras porosas más irregulares. Concretamente, en el sector de la energía los soportes porosos se utilizan en aplicaciones tales como pilas de combustibles de óxidos sólidos o electrolizadores, membranas para la separación de gases, típicamente O2 o H2, y reactores catalíticos de membrana. En este artículo se revisan de manera exhaustiva los desarrollos en estos campos utilizando freeze-casting para el conformado de cuerpos porosos cerámicos. © 2016 SECV. Publicado por Elsevier España, S.L.U, Financial support by the Spanish Ministry for Science and Innovation (ENE2011-24761 and SEV-2012-0267 grants) and by the EU through FP7 GREEN-CC Project (Grant Agreement Number: 608524) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Engineering microstructure and redox properties in the mixed conductor Ce0.9Pr0.1O2-d+Co 2 mol %

  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Solis Díaz, Cecilia
  • Roitsch, Stefan
10% Praseodymium doped ceria exhibits a combination of mixed ionic and electronic conductivity, redox catalytic properties and chemical compatibility with water and carbon dioxide at high temperatures. Minor additions of cobalt oxide have been demonstrated to act as a sintering aid as well as an effective promoter of the electronic conduction. However, an excess of sintering temperature causes cobalt aggregation into the grain boundaries as inferred from FE-SEM/EDX and TEM analysis. The redox behaviour of the materials was studied by means of temperature programmed desorption (TPD) and reduction (TPR). This work shows the systematic study of sintering conditions in order to understand the evolution of the material microstructure, grain boundaries and the role of cobalt in this complex system. The final purpose of the work is to improve both electronic and oxygen ion transport properties for their potential application as oxygen-transport membranes and solid oxide fuel cell components. The sample sintered at 1000 degrees C exhibited the highest total conductivity at high temperatures, which is principally related to the improvement in the electronic conductivity through the grain boundary network., Funding from the Spanish Government (ENE2011-24761 and SEV-2012-0267 grants) and Helmholtz Association (MEM-BRAIN Portfolio) is kindly acknowledged. Dr J. L. Jorda contributed to this work with the HT-XRD measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modification of Nafion Membranes with Polyaniline to Reduce Methanol Permeability

  • Gonzalez-Ausejo, J.
  • Cabedo Mas, Luis
  • Gámez-Pérez, J.
  • Mollá Romano, Sergio
  • Giménez Torres, Enrique|||0000-0002-6330-0209
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
The modification of Nafion membranes with polyaniline (PAni) has been studied as an alternative for reducing methanol crossover in direct methanol fuel cells (DMFC). The modification has been performed by directly polymerizing the PAni following two different routes: immersion (Naf-S-Y, where S mean surface and Y the number of hours exposition) and crossover (Naf-C-Y, where C means crossover). The former consist of exposing the membranes to a reactive solution containing the aniline, oxidant and catalyst; while in the latter the aniline and a solution with the oxidant and the catalyst are in different chambers separated by the membrane, thus forcing them to react inside it. The effect of the modification mechanism and the reaction times has been studied. The resulting membranes were extensively characterized by means of Fourier Transform Infrared (FTIR), ionic exchange capacity (IEC), water uptake (WU), methanol permeability and single direct methanol fuel cell performance. Chemical characterization revealed that the oxidation state of the polyaniline was in all cases emeraldine and the amount of PAni for an equivalent exposure time was bigger for the crossover route. The crossover route has proven to be more effective in decreasing the apparent methanol permeability of Nafion modified membranes up to 48% for the crossover sample with higher modification time when the polymerization is due inside the membrane such is the case of the composite Naf-C-Y membranes. The Direct Methanol Fuel Cells performances of membrane-electrode assemblies prepared with pristine Nafion and Nafion-PAni membranes were tested at 40, 60 and 80 degrees C under 2 M methanol concentration. The results are compared with those found for Nafion pristine membranes which power densities were 90, 65, 60 and 50 mW/cm(2) at 80 degrees C for Nafion, Naf-S-1, Naf-S-5 and Naf-C-2, membranes respectively., This research is in the frame of Support Program for Research and Development of the Polytechnic University of Valencia and the Ministry of Science and Innovation for funding provided through the projects: SP-ENE-20120718 and 24761, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Oxygen transport membranes in a biomass/coal combined strategy for reducing CO2 emissions: Permeation study of selected membranes under different CO2-rich atmospheres

  • García Fayos, Julio
  • Vert Belenguer, Vicente Bernardo
  • Solis Díaz, Cecilia
  • Gaudillere, Cyril Christian
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] This contribution introduces how the integration of biomass as fuel in power plants would balance CO2 emissions and the related role of oxygen transport membranes (OTM) on it. CO2 capture techniques could be introduced to minimize CO2 emissions at the cost of a substantial energy penalty in the overall process. Among the different approaches, the use of pure O2 and/or N2-free oxidation gases for combustion and/or for gasification leads to promising energy efficiencies. Ceramic OTM membranes could be successfully integrated in such thermal processes, which enable to increase the net plant efficiency when CO2 capture is implemented. Further, this work reviews how selected ceramic materials and membrane architectures behave under CO2 containing atmospheres at high temperatures above 700 °C. These conditions have been selected for checking the viability of these membrane compositions and configurations to fit in an oxy-co-gasification process, involving coal and biomass. The tested asymmetric membranes present competitive oxygen fluxes in the range 0.6 1.2 ml min&#8722;1 cm&#8722;2 when using CO2 as (inlet) sweep gas at 850 °C (optimal membrane operation conditions in oxy-fuel power plant) and stable oxygen production up to 100 h of continuous operation in similar conditions. Specifically, La0.6Sr0.4Co0.2Fe0.8O3&#8722;ä and NiFe2O4 Ce0.8Tb0.2O2&#8722;ä composite materials showed the best results for oxygen permeation and time stability under CO2-rich atmospheres., Financial support by the Spanish Government (ENE2011-24761 and SEV-2012-0267 grants), by the EU through FP7 GREEN-CC Project (GA 608524), and by the Helmholtz Association of German Research Centers through the Helmholtz Portfolio MEM-BRAIN is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

New bio-polymeric membranes composed of alginate-carrageenan to be applied as polymer electrolyte membranes for DMFC

  • Pasini Cabello, S.D.
  • Mollá Romano, Sergio
  • Ochoa, N.A.
  • Marchese, J.
  • Giménez Torres, Enrique|||0000-0002-6330-0209
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
Novel polyelectrolyte membranes were prepared from pure solutions of alginate (Alg), carrageenan (Car) and their mixtures. The films were crosslinked and sulfonated and then, characterized by several techniques: ionic exchange capacity (IEC), water uptake, mechanical thermal properties, and also functional properties such as methanol permeability and proton conductivity. The results show that Alg/ Car membranes have a ductile behavior. Low carrageenan concentrations have a weak thermoprotective effect, which slightly delays both T-g and T-m of prepared membranes. The methanol permeability of Alg/ Car membranes increase with the carrageenan content varying from 0.55 x 10-6 cm(2) s(-1) for Alg/Car 100/ 00 to 4.89 x. 10-6 cm(2) s(-1) for Alg/Car 80/20. The Proton conductivities of the membranes increase with the carrageenan content from 9.79 x 10(-3) S cm(-1) for Alg/Car 100/00 until 3.16 x 10(-2) S cm(-1) for Alg/Car 80/20 at 90 degrees C. Finally the proton transfer mechanism is discussed in terms of the conductivity activation energy and the dependence of the proton diffusion coefficient with the temperature has been studied., This research has been supported by the ENE/2011-24761 project, granted by the Ministerio de Ciencia e Innovacion, Spain, and grants from ANPCyT, Universidad Nacional de San Luis, CONICET, Argentina. Sergio David Pasini Cabello thanks Erasmus Mundus Program for a EUROTANGO 2 fellowship at the Universidad Politecnica de Valencia (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimization of the mixed protonic–electronic conducting materials based on (Nd5/6Ln1/6)5.5WO11.25−δ

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Schroeder, Michael
[EN] The tungstates Ln6WO12 are proton conducting materials exhibiting mixed (protonic and electronic) conductivity and remarkable stability in moist CO2 environments. Hydrogen-permeable membranes made of this kind of material find application in industrial gas separations such as hydrogen separation from hydrogen containing gases, for the implementation of pre-combustion strategies in fossil-fuel power plants and catalytic membrane reactors. This work presents a thorough characterization (structure, conduction and hydrogen permeation) of mixed conducting materials on the specific system (Nd5/6Ln1/6)5.5WO11.25 d (Ln: La, Ce, Pr, Eu, Tb). The evolution of the crystal structure and crystallite size was studied as a function of the lanthanide dopant. The total conductivity in different environments was investigated as a function of pO2 and temperature. Furthermore, the H/D isotopic effect and the hydration effect were also studied in reducing and oxidizing atmospheres by DC conductivity measurements. Hydrogen permeation was measured for all compounds in the range of 700 1000 C studying the effect of pH2 and the hydration degree of the membrane depending on the lanthanide dopant. Finally, the chemical stability of these materials at 800 C was evaluated in contact with a humidified CO2-rich gas stream., Financial support by the Spanish Ministry for Science and Innovation (Grants JAE-Pre 08-0058, ENE2011-24761, CSD-2009-0050 and SEV-2012-0267) and the Helmholtz Association of German Research Centres through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Syngas production at intermediate temperature through H2O and CO2 electrolysis with a Cu-based solid oxide electrolyzer cell

  • Gaudillere, Cyril Christian
  • Navarrete Algaba, Laura
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
Solid Oxide Electrolyzer Cells (SOECs) are promising energy devices for the production of syngas (H2/CO) by H2O and/or CO2 electrolysis. Here we developed a Cu-Ce0.9Gd0.1O2-&#948;/Ce0.8Gd0.2O2-&#948;/Ba0.5Sr0.5Co0.8Fe0.2O3-&#948;-Ce0.8Gd0.2O2-&#948; cell and performed H2O and CO2 electrolysis experiments in the intermediate temperature range (600ºC-700ºC). As a baseline, the cell was first tested in fuel cell operation mode; the sample shows a maximum power density peak of 104 mW.cm-2 at 700ºC under pure hydrogen and air. H2O electrolysis testing revealed a steady production of hydrogen with a Faraday s efficiency of 32% at 700ºC at an imposed current density of -78mA.cm-2. CO production was observed during CO2 electrolysis but higher cell voltages were required. A lower efficiency of about 4% was obtained at 700ºC at an imposed current density of -660 mA.cm-2. These results confirm that syngas production is feasible by water and carbon dioxide electrolysis but further improvements from both the manufacturing and the electrocatalytic aspects are needed to reach higher yields and efficiencies., Financial funding from the Spanish Government (ENE2011-24761 and SEV-2012-0267 grants) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Particular Transport Properties of NiFe2O4 Thin Films at High Temperatures

  • Solis Díaz, Cecilia
  • Somacescu, Simona
  • Palafox, E.
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
NiFe2O4 (NFO) thin films were deposited on quartz substrates by rf magnetron sputtering, and the influence of the deposition conditions on their physic-chemical properties was studied. The films structure and the high temperature transport properties were analyzed as a function of the deposition temperature. The analysis of the total conductivity up to 800 degrees C in different pO(2) containing atmospheres showed a distinct electronic behavior of the films with regard to the bulk NFO material. Indeed, the thin films exhibit p-type electronic conductivity, while the bulk material is known to be a prevailing n-type electronic conductor. This difference is ascribed to the dissimilar concentration of Ni3+ in the thin films, as revealed by XPS analysis at room temperature. The bulk material with a low concentration of Ni3+ (Ni3+/Ni2+ ratio of 0.20) shows the expected n-type electronic conduction via electron hopping between Fe3+Fe2+. On the other hand, the NFO thin films annealed at 800 degrees C exhibit a Ni3+/Ni2+ ratio of 0.42 and show p-type conduction via hole hopping between Ni3+Ni2+, Funding from the Spanish Government (ENE2011-24761 and SEV-2012-0267 grants) is kindly acknowledged. The support of the Servicio de Microscopia Electronica of the Universidad Politecnica de Valencia is also acknowledged. S. Somacescu would like to thank Dr. Petre Osiceanu (Institute of Physical Chemistry, Romanian Academy) for support helpful discussion during XPS data interpretation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rare Earth-doped Ceria Catalysts for ODHE Reaction in a Catalytic Modified MIEC Membrane Reactor

  • Lobera González, Maria Pilar
  • García Fayos, Julio
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] An intensification process for the selective oxidation of hydrocarbons integrates a catalytic reactor and an oxygen separation membrane. This work presents the study of oxidative dehydrogenation of ethane at 1123 K in a catalytic membrane reactor based on mixed ionic-electronic conducting (MIEC) membranes. The surface of a membrane made of Ba0.5Sr0.5Co0.8Fe0.2O3-d has been activated using different porous catalytic layers based on rare earth-doped cerias (fluorite structure) and the porous catalytic coating was deposited by screen printing (coating around 15 mu m). The different catalyst formulations were developed by partial substitution of Ce and were synthesized by co-precipitation followed by cobalt impregnation when required. Specifically, seven different catalysts based on the system Ce1-xLnxO2-d (x=0.1 or 0.2; Ln=Tb, Pr, Er, Gd, and Tb+Er), including the effect of cobalt addition (2?% molar) in Ce0.8Tb0.2O2-d, were studied. The ceria catalysts were studied by XRD, SEM, DC-conductivity as a function of oxygen partial pressure, and the high-temperature stability in a CO2 environment was assessed using thermogravimetry. Then, the influence of the ceria catalytic coating on the oxygen permeation flux through the MIEC membrane was studied using argon and methane as the sweep gas in the permeate side. Finally, oxidative dehydrogenation of ethane reaction tests were performed at 1123 K, as a function of the ethane concentration in the feed. The use of a disk-shaped membrane in the reactor made it possible to prevent the direct contact of gaseous oxygen and hydrocarbons and thus to increase the ethylene yield. High ethylene yields (up to approximate to 84?%) were obtained using a catalytic coating based on 20?% Tb-doped ceria including macropores produced by the addition of graphite platelets in the screen printing ink. The high yields obtained in this kind of catalytic membrane are attributed to the combination of: the high catalytic activity; the control of the oxygen concentration in the gas phase (reaction chamber); and the appropriate fluid dynamics, enabling the fast ethylene evacuation., Financial support by the Spanish Ministry for Science and Innovation (ENE2011-24761 FPI BES-2009-015835 grants), EU through FP7 NASA-OTM Project (NMP3-SL-2009-228701), and the Helmholtz Association of German Research Centres through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hydrogen permeation through Nd-doped La6WO12 membranes

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Solis Díaz, Cecilia
[EN] This work presents the preparation and characterization of the hydrogen permeation of a mixed protonic-electronic conducting membrane based on the doped system La6WO12, in this instance, (La5/6Nd1/6)(5.5)WO12-delta. The tungstates Ln(6)WO(12) present sufficient protonic and electronic mixed conductivity and stability in moist CO2 environments and are potential candidates for the separation of hydrogen at high temperatures. Hydrogen separation properties of (La5/6Nd1/6)(5.5)WO12-delta were systematically analyzed, specifically, the influence of the H-2 concentration in feed stream, humidification degree and operating temperature on the hydrogen separation were studied. The best permeation results were achieved when both membrane sides were humidified (2.5 vol.% H2O), i.e., the highest hydrogen flux was 0.046 mL min(-1) cm(-2) at 1000 degrees C for membrane thickness of 0.9 mm. (C) 2011 Elsevier B.V. All rights reserved., Financial support by the Spanish Ministry for Science and Innovation (grant JAE-Pre 08–0058, projects ENE2008-06302 and ENE2011-24761) and the Helmholtz Association of German Research Centers through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced oxygen diffusion in low barium-containing La0.2175Pr0.2175Ba0.145Sr0.4Fe0.8Co0.2O3&amp, #8722, &amp, #948, intermediate temperature solid oxide fuel cell cathodes

  • Vert Belenguer, Vicente Bernardo
  • Kilner, J.A.
  • Burriel, M.
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Isotopic tracer diffusion studies have been performed on the perovskite composition La0.2175Pr0.2175Ba0.145Sr0.4Fe0.8Co0.2O3-delta to obtain the diffusion and surface exchange coefficients for oxygen. This material has been identified as a highly active electrocatalytic cathode for intermediate temperature solid oxide fuel cells. The oxygen diffusion coefficients obtained in the 450-650 degrees C temperature range are higher than the ones measured for most of the cathode materials reported in the literature and they agree with those calculated from electrochemical impedance spectroscopy measurements performed on symmetrical cells., Funding from the Universitat Politecnica de Valencia (grants FPI-UPV-2007-06 and PAID-00-10) and Spanish Government (grant ENE2011-24761) is kindly acknowledged. The research leading to these results has received funding from the European Union Seventh Framework Programme (FP7/2007-2013) under grant agreement no : PIEF-GA-2009-252711 and from King Abdullah University of Science and Technology (KAUST) through a research grant. The authors would like to thank S. Jimenez for material and sample preparation and Dr. S. Fearn, R. Charter and S. Cook for their help with ToF-SIMS analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structural-Transport Properties Relationships on Ce(1-x)Ln(x)O(2-delta) System (Ln = Gd, La, Tb, Pr, Eu, Er, Yb, Nd) and Effect of Cobalt Addition

  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Solis Díaz, Cecilia
A large series of doped cerias have been prepared by the coprecipitation method combined with impregnation and completely characterized in order to have an overall understanding of the structural, oxygen vacancy concentration, and transport properties relationships. Several lanthanides were incorporated in the fluorite structure, and the effects of the final sintering temperature (1073 and 1573 K) and the addition of cobalt oxide on the structural properties were studied. The chosen lanthanides (Gd, La, Tb, Pr, Eu, Er, Yb and Nd) included a large range of ionic radii and different metals exhibiting variable oxidation states under the typical operating conditions for these materials. The materials have been characterized by powder XRD, high-temperature XRD, micro- Raman spectroscopy, helium pycnometry, and dc conductivity. Transport properties were correlated with structural features induced by the different ionic radii and variable oxidation state of the dopants. The highest ionic conductivity was obtained for the less distorted cells (Gd- and Nd-doped ceria) which represent the optimum balance between Coulomb interactions, steric effects, and vacancy distribution. The lowest Ea value was found for materials with long cell parameters., Financial support by the Spanish Ministry for Science and Innovation (Project ENE2008-06302, ENE2011-24761 and Grant BES-2009-015835), Spanish Industry Ministry (Project IAP-560620-2008-17), and Instalaciones Inabensa S.A. is kindly acknowledged. Dr. Jose L. Jorda contributed to this work with HT-XRD diffraction experiments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic surface promotion of highly active La0.85Sr0.15Cr0.8Ni0.2O3-delta anodes for La5.6WO11.4-delta based proton conducting fuel cells

  • Solis Díaz, Cecilia
  • Bozza, F.
  • Bonanos, Nikos
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] La0.85Sr0.15CrO3-delta (LSC), La0.85Sr0.15Cr0.8Ni0.2O3-delta (LSCN) and LSCN infiltrated with Ni nanoparticles were tested as anodes for symmetrical cells based on La5.6WO11.4-delta (LWO) protonic electrolyte. These chromite-based electrode materials are compatible with LWO material, in contrast to the widely used NiO. Under typical anode reducing conditions, Ni is segregated from the LSCN lattice on the grain surface as metallic Ni nanoparticles, which are proved to be compatible with LWO in reducing conditions. These Ni nanoparticles become the catalytic active sites for the H-2 oxidation reaction in proton conducing anodes and the electrode performance is substantially improved regarding to pure LSC. Ni nanoparticle infiltration further improves the catalytic promotion of the anode, reducing the polarization resistance (R-p) previously limited by low frequency surface related processes. Indeed, the R-p, values achieved for LSCN infiltrated with Ni, e.g. 0.47 Omega cm(2) at 700 degrees C, suggest the practical application of this kind of anodes in proton conducting solid oxide fuel cells (PC-SOFC). (C) 2013 Elsevier B.V. All rights reserved., Funding from European Union (FP7 Project EFFIPRO - Grant Agreement 227560), the Spanish Government (ENE2011-24761, SEV-2012-0267 and CSIC Intramural 2008801093 grants) is kindly acknowledged. The authors thank M. Fabuel for sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced oxygen separation through robust freeze-cast bilayered dual-phase membranes

  • Gaudillere, Cyril Christian
  • García Fayos, Julio
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
Dual-phase oxygen-permeable asymmetric membranes with enhanced oxygen permeation were prepared by combining freeze-casting, screen-printing, and constraint-sintering techniques. The membranes were evaluated under oxyfuel operating conditions. The prepared membranes are composed of an original ice-templated La0.6Sr0.4Co0.2Fe0.8O3-delta support with hierarchically oriented porosity and a top fully densified bilayered coating comprising a 10 mm-thick La0.6Sr0.4Co0.2Fe0.8O3-delta layer and a top protective 8 mm-thick layer made of an optimized NiFe2O4/Ce0.8Tb0.2O2-delta composite synthesized by the one-pot Pechini method. Preliminary analysis confirmed the thermochemical compatibility of the three involved phases at high temperature without any additional phase detected. This membrane exhibited a promising oxygen permeation value of 4.8 mLmin(-1)cm(-2) at 1000 degrees C upon using Ar and air as the sweep and feed gases, respectively. Mimicking oxyfuel operating conditions by switching argon to pure CO2 as a sweep gas at 1000 degrees C and air as feed enabled an oxygen flux value of 5.6 mLmin(-1)cm(-2) to be reached. Finally, under the same conditions and increasing the oxygen partial pressure to 0.1 MPa in the feed, the oxygen permeation reached 12 mLmin(-1)cm(-2). The influence of CO2 content in the sweep gas was studied and its reversible and positive effect over oxygen permeation at temperatures equal to or above 950 degrees C was revealed. Finally, the membrane stability over a period of 150 h under CO2-rich sweep gas showed a low degradation rate of 2.4 x 10(-2) mLmin(-1)cm(-2) per day., Funding from the Spanish Government (ENE2011-24761 and SEV-2012-0267 grants) is kindly acknowledged. Dr. C. Solis contributed to this work with FE-SEM analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tailoring mixed ionic-electronic conduction in H-2 permeable membranes based on the system Nd5.5W1-xMoxO11.25-delta

  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Somacescu, Simona
Lanthanide tungstates (Ln(6)WO(12)) are promising candidates for the development of ceramic hydrogen transport membranes since they exhibit mixed ionic (proton and oxygen ion transport) and electronic conductivity and remarkable stability in a moist CO2 environment at high temperatures. This work presents the structural and electrochemical characterization of mixed conducting materials for the specific system Nd5.5W1-xMoxO11.25-delta (x = 0, 0.1, 0.5 and 1). Evolution of the crystalline structure is studied as a function of the sintering temperature. Shrinkage behavior is analyzed for all compositions in the temperature range from 1000 degrees C to 1500 degrees C and these compounds show high sintering activity even at relatively low temperatures. The total conductivity in different environments is studied systematically for samples sintered at 1350 degrees C. The H/D isotopic effect is also studied by DC-electrochemical measurements. H-2 permeation is investigated for the selected compound Nd5.5W0.5Mo0.5O11.25-delta in the range of 700-1000 degrees C achieving values of 0.3 mL min(-1) cm(-2) for a 0.9 mm thick disc membrane. Finally, the stability of this material under different CO2 and H2S-rich atmospheres at high temperatures is proven., Financial support by the Spanish Government (Grants JAE-Pre 08-0058, ENE2011-24761, CSD-2009-0050 and SEV-2012-0267) and the Helmholtz Association of German Research Centers through the portfolio topic MEM-BRAIN is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

SOFC composite cathodes based on LSM and co-doped cerias (Ce0.8Gd0.1X0.1O2-d, X = Gd, Cr, Mg, Bi, Ce)

  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Vert Belenguer, Vicente Bernardo
  • Navarrete Algaba, Laura
Ceria-based materials have been incorporated into LSM conventional cathodes in order to improve the electrochemical performance. Gadolinium and other elements (Mg, Cr and Bi) have been used as ceria codopants in order to enhance conduction and electrocatalytic properties of several LSM-ceria composites. Among the different tested LSM-ceria cathodes, Ce0.8Gd0.1Mg0.1O2-delta-based composite material offers the lowest electrode polarization resistance in the 700-900 degrees C temperature range. However, at the lowest tested temperatures these results are similar to those obtained for the Ce0.8Gd0.2O2-delta binary system, thus the selection of Gd-co-doping elements should principally address economic issues. Since LSM-based cathodes are pointed for high temperature applications (> 800 degrees C), this magnesium-co-doped ceria-gadolinia compound could be an alternative to the widely used Ce1-xGdxO2-delta binary system., Financial support by the Spanish Ministry for Economics and Competitiveness (ENE2011-24761 grant) is kindly acknowledged. Authors thank Fraunhofer IKTS for dense electrolyte preparation and Mrs. M. Fabuel for assistance in electrochemical tests.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hydrogen separation in La5.5WO11.25-delta membranes

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Solis Díaz, Cecilia
  • Scherb, Tobias
  • Schumacher, Gerhard
Tungstates Ln(6)WO(12) are proton conducting crystalline materials which show significant mixed protonic and electronic conductivity and stability in moist CO2 environments. These materials are promising candidates for hydrogen separation membranes at temperatures above 700 degrees C, especially when integrated in intensified processes as catalytic membrane reactors. From this family of compounds, La6-x WOy (0.4 < x < 0.7) presents the highest protonic conductivity and hydrogen permeability. This contribution presents the preparation, hydrogen permeation and stability study of La5.5WO11.25-delta membranes. Hydrogen separation properties of La5.5WO11.25-delta were systematically analyzed, i.e. the influence of the H-2 concentration in feed stream, humidification degree and operating temperature were investigated. The integrity of the La5.5WO11.25-delta after the hydrogen permeation experiments was confirmed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Raman spectroscopy. The stability of La5.5WO11.25-delta, permeation when CO2 containing atmosphere was used as sweep gas was evaluated. Furthermore, the stability of this compound in CO2-rich and sulfur-containing environments was confirmed by XRD. (C) 2013 Elsevier B.V. All rights reserved., Financial support by the Spanish Government (Grants JAE-Pre 08-0058, ENE2011-24761, CSD-2009-0050 and SEV-2012-0267) and the Helmholtz Association of German Research Centers through the portfolio topic MEM-BRAIN is kindly acknowledged. The authors are indebted to S. Jimenez for sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transport properties and oxidation and hydration kinetics of Mo doped Nd5.5WO11.25-delta

  • Ruf, Mischa
  • Solis Díaz, Cecilia
  • Dittmeyer, Roland
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Surface exchange and diffusion coefficients of the protonic conductor Nd5.5W0.5Mo0.5O11.25-delta were obtained by means of conductivity relaxation experiments as a function of temperature, pO(2) and pH(2)O. The two-fold non-monotonic behaviour in the hydration/dehydration relaxations allows proton and oxygen vacancy coefficients to be independently determined whereas the H/D isotopic effect was confirmed., Financial support by the Spanish Government (Grants JAE-Pre 08-0058, ENE2011-24761, CSD-2009-0050 and SEV-2012-0267) and the German Federal Ministry for Education and Research through the portfolio topic MEM-BRAIN of the Helmholtz Association of German Research Centers is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ethylene Production by ODHE in Catalytic Modified Ba0.5Sr0.5Co0.8Fe0.2O3 Membrane Reactors

  • Lobera González, Maria Pilar
  • García Fayos, Julio
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Process intensification by the integration of membranes and high-temperature reactors offers several advantages with regard to conventional process schemes, that is, energy saving, safe operation, reduced plant/unit size, and higher process performance, for example, higher productivity, catalytic activity, selectivity, or stability. We present the study of oxidative dehydrogenation of ethane at 850 8C on a catalytic membrane reactor based on a mixed ionic¿electronic conducting membrane. The surface of the membrane made of Ba0.5Sr0.5Co0.8Fe0.2O3 d has been activated by using different porous catalytic layers based on perovskites. The layer was deposited by screen printing, and the porosity and thickness was studied for the catalyst composition. The different catalyst formulations are based on partial substitution of A- and B-site atoms of doped strontium ferrite/cobaltites (A0.6Sr0.4Co0.5Fe0.5O3 d and Ba0.6Sr0.4BO3 d) and were synthesized by an ethylenediaminetetraacetic acid¿citrate complexation route. The use of a disk-shaped membrane in the reactor enabled the direct contact of gaseous oxygen and hydrocarbons to be avoided, and thus, the ethylene content increased. High ethylene yields (up to 81%) were obtained by using a catalytic coating based on Ba0.5Sr0.5Co0.8Fe0.2O3 d, which included macropores produced by the addition of graphite platelets into the screen-printing ink. The promising catalytic results obtained with this catalytically modified membrane reactor are attributed to the combination of 1) the high activity, as a result of the high temperature and oxygen species diffusing through the membrane; 2) the control of oxygen dosing and the low concentration of molecules in the gas phase; and 3) suitable fluid dynamics, which enables appropriate feed contact with the membrane and the rapid removal of products., Financial support by the Spanish Ministry for Science and Innovation (Project ENE2008-06302, ENE2011-24761 and FPI Grant JAE-Pre 08-0058), the EU through the FP7 NASA-OTM Project (NMP3-SL-2009-228701), and the Helmholtz Association of German Research Centres through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged. We thank S. Jimenez for material preparation, M. Fabuel for TPD experiments, and Forschungszentrum Julich for SEM analysis of BSCF catalytic layer.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dual-Phase Oxygen Transport Membranes for Stable Operation in Environments Containing Carbon Dioxide and Sulfur Dioxide

  • García Fayos, Julio
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Dual-phase membranes are appealing candidates for oxygen transport membranes owing to their unique combination of ambipolar electron-ion transport and endurance. However, O-2 separation in industrial environments demands very high stability and effectiveness in the presence of CO2- and SO2-bearing process gases. Here, the composition of dual-phase membranes based on NiFe2O4-Ce0.8Tb0.2O2-delta (NFO-CTO) was optimized and the effective performance of catalytically-activated membranes was assessed in presence of CO2 and SO2. Further insight into the limiting mechanisms in the permeation was gained through electrical conductivity studies, permeation testing in several conditions and impedance spectroscopy analysis. The dual-phase membranes were prepared by one-pot sol-gel method and their permeability increases with increasing fluorite content. An O-2 flux of 0.25 (ml min(-1) cm(-2)) mm at 1000 degrees C was obtained for a thick self-standing membrane with 40:60 NFO/CTO composition. An in-depth study mimicking typical harsh conditions encountered in oxyfuel flue gases was performed on a 50:50 NFO/CTO membrane. CO2 content as well as SO2 presence in the sweep gas stream were evaluated in terms of O-2 permeation. O-2 fluxes of 0.13 and 0.09 mL min(-1) cm(-) 2 at 850 degrees C were obtained for a 0.59 mm thick membrane under CO2 and 250 ppm SO2 in CO2 sweep conditions, respectively. Extended periods at work under CO2- and SO2-containing atmospheres revealed good permeation stability over time. Additionally, XRD, backscattered electrons detector (BSD)-SEM, and energy-dispersive X-ray spectroscopy (EDS) analysis of the spent membrane confirmed material stability upon prolonged exposure to SO2., Financial support by the Spanish Ministry for Science and Innovation (ENE2011-24761 and SEV-2012-0267 Grants) and by the EU through FP7 GREEN-CC Project (Grant Agreement Number: 608524) is gratefully acknowledged. The authors would like to express their gratitude to Dr. Cecilia Solis for Scanning Electron Microscopy analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Conductivity of composite membrane-based poly(ether-ether-ketone) sulfonated (SPEEK) nanofiber mats of varying thickness

  • Reyes, J.L
  • Solorza-Feria, Omar
  • García Bernabé, Abel
  • Sahuquillo, Oscar
  • Giménez Torres, Enrique|||0000-0002-6330-0209
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
Nanofiber mats of SPEEK70wt%-PVB30 wt% (polyvinyl butyral)-based composite membranes were prepared by varying the electrospinning time in order to obtain mats with different thicknesses. These mats were embedded in SPEEK65wt%-PVA(35wt%) (polyvinyl alcohol) polymer solution to fill the pores in the fibers. The obtained membranes with different mat thicknesses have been characterized by water uptake, ionic exchange capacity, scanning electron microscopy, mechanical properties and proton conductivity. Microtensile test studies reveal that the maximum tensile strength increases as the thickness of the SPEEK-PVB nanofiber mats increases, resulting in more flexible composite membranes compared to a pure SPEEK-PVA membrane obtained by casting. The proton conductivity occurs more easily through the nanofiber than through the matrix phase, and the best conductivity (0.038 S cm(-1)) was measured at 120 degrees C for the composite membrane of SPEEK-PVB nanofiber mats obtained after 12 hours of electrospinning time. This value suggests that our composite membranes have high potential to function in the temperature range between 100 and 140 degrees C without losing their strength and while maintaining their high proton conductivity, making them an excellent candidate for fuel cells that operate at intermediate temperatures., This research has been supported by the ENE/2011-24761 project, granted by the Ministerio de Economia y Competitividad (MINECO), Spain, and grants from CONACYT-SENER-SUSTENTABILIDAD ENERGETICA 2014-02-245920 through Centro de Investigacion y de Estudios Avanzados del Instituto Politecnico Nacional (CINVESTAV), Mexico. Jose Luis Reyes-Rodriguez thanks CONACYT Program for a fellowship at the Universidad Politecnica de Valencia (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Oxygen permeation through tape-cast asymmetric all-La0.6Sr0.4Co0.2Fe0.8O3 (-) (delta) membranes

  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • García Fayos, Julio
  • Baumann, S.
  • Schulze-Kueppers, F.
  • Meulenberg, W. A.
[EN] One of the most promising materials for oxygen separation amongst ceramic oxygen transport membranes (OTMs) is La0.6Sr0.4Co0.2Fe0.8O3 (-delta) (LSCF) due to its relatively high oxygen permeability combined with high stability. In this work, asymmetric thin-film LSCF membranes supported over a porous LSCF support were manufactured by inverse sequential tape casting. Moreover, surface activation was accomplished by depositing a porous LSCF activation layer in order to promote oxygen evolution reaction, i.e. O2- to O-2 oxidation, in the permeate membrane side. In this case, the porous layer allows the surface area available for oxygen activation to be enlarged. Both the manufacturing of the asymmetric thin-film membranes and the surface activation are described in detail. A thorough study of the oxygen permeation is presented for disk-shaped 30 mu m thick LSCF-supported membranes considering the following operating parameters: temperature (1000-600 degrees C), sweep flow rate (300-750 ml min(-1) argon) and oxygen partial pressure in the feed (0.21-1 atm). High permeation fluxes were achieved, e.g., 11.87 ml min(-1) cm(-2) at 1000 degrees C and 300 ml min(-1) argon sweep when using pure oxygen as feed. A change in the apparent activation energy at about 850 degrees C was related to a reversible structural change in the perovskite symmetry (cubic <-> rhombohedral), as revealed by XRD measurements. Furthermore, the application of an activation layer allowed the permeation process to be improved, especially at low temperatures, i.e. below 800 degrees C. Specifically, an improvement of up to about 300% at 600 degrees C is observed upon application of the activation layer. The activated membrane reached a flux of 13.3 ml min(-1) cm(-2) at 1000 degrees C under an O-2/Ar gradient. Additional permeation tests using CO2-rich sweep gas demonstrated the good stability and performance of these LSCF asymmetric membranes at 900 and 1000 degrees C. (c) 2013 Elsevier B.V. All rights reserved., Financial support by the Spanish Ministry for Science and Innovation (ENE2011-24761 and SEV-2012-0267 Grants), by the EU through FP7 NASA-OTM Project (NMP3-SL-2009-228701), and by the Helmholtz Association of German Research Centres through the Helmholtz Portfolio MEM-BRAIN is gratefully acknowledged. The authors would like to express their gratitude to Dr. W. Fischer for crystal structure analysis by X-ray diffraction. Mrs. J. Carter-Sigglow has contributed to this work with the careful revision of the English usage.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Combined investigation of bulk diffusion and surface exchange parameters of silver catalyst coated yttrium-doped BSCF membranes

  • Haworth, Patrick
  • Smart, Simon
  • Diniz da Costa, Joe
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The combined effect of minor yttrium doping and silver catalyst deposition on the surface kinetics (kchem) and bulk diffusion (D-chem) of BSCF (Ba0.5Sr0.5Co0.8Fe0.2O3-d) perovskite membranes was explored using electrical conductivity relaxation (ECR) and validated using oxygen permeation measurements. Yttrium doping of BSCF to form Ba0.5Sr0.5Co0.8Fe0.175Y0.025O3-d (BSCFY) improved both the surface exchange kinetics and the bulk diffusion by an average of 44% and 177% respectively, supporting improved oxygen permeation measurements. The deposition of a silver catalyst on BSCFY further improved the surface kinetics by 63-450% at intermediate operating temperatures (600-750 degrees C), and reduced the activation energy from 163 to 90 kJ mol(-1). Interestingly, these improvements did not translate into enhanced oxygen fluxes for the silver coated thicker 0.5 and 1 mm membranes, indicating that the oxygen ion transport was limited by bulk diffusion. However, oxygen permeation measurements on catalyst-coated 0.3 mm-thick membranes yielded improvements of 20-35% in the range 600-900 degrees C. The silver catalyst was beneficial in overcoming surface kinetic limitations for the thinner 0.3 mm BSCFY membranes, thus suggesting that the critical thickness of BSCFY membranes lies around similar to 0.4 mm and validating the ECR measurements., Patrick Haworth acknowledges the PhD scholarship provided by the Australian Government and The University of Queensland, and the International Travel Award provided by the University of Queensland Graduate School. The authors would like to thank the Australian Research Council (grant DP0878849) and Spanish Ministry for Science and Innovation (grant ENE2011-24761) for financial support of this research project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and understanding of La0.85Sr0.15Cr1-xNixO3-delta anodes for La5.6WO11.4-delta-based Proton Conducting Solid Oxide Fuel Cells

  • Solis Díaz, Cecilia
  • Navarrete Algaba, Laura
  • Balaguer, María
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Porous electrodes based on the system La0.85Sr0.15Cr1-xNixO3-delta (x = 0.1 and 0.2) have been investigated as anodes for proton conducting solid oxide fuel cells based on the La5.6WO11.4-delta (LWO) electrolyte material. The microstructure of the anodes was optimized by varying both the starting powder morphology and the final anode sintering temperature. Two different electrode thicknesses were studied, i.e. 15 and 30 gm. The importance of the catalytic role of Ni was also studied by using different concentrations of Ni (10% and 20%) in the chromite and by tuning the Ni particle sizes through the control of the reduction temperature. Additionally, a ceramic-ceramic (cer-cer) composite electrode comprising a physical mixture of the optimized chromite and LWO phase was also considered. Finally, a kinetics study and modeling based on Langmuir-Hinshelwood mechanism was carried out in order to quantitatively describe the rate of dissociative adsorption of H-2 on the Ni particles spread on the chromite surface., Funding from the Spanish Government (ENE2011-24761, SEV-2012-0267, BES-2012-053180) and European Union (FP7 Project EFFIPRO - Grant Agreement 227560) are kindly acknowledged. Authors are indebted to M. Fabuel for sample preparation and Forschungszentrum Julich (Dr. M. Ivanova) for SEM analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical properties of composite fuel cell cathodes for La5.5WO12−δ proton conducting electrolytes

  • Solis Díaz, Cecilia
  • Navarrete Algaba, Laura
  • Roitsch, Stefan
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] New composite cathodes for proton conducting solid oxide fuel cells (PC-SOFCs) based on the novel La5.5WO12-delta (LWO) electrolyte have been developed. First the applicability of LWO as a protonic electrolyte has been proved by recording the OCV in a Pt/LWO/Pt cell as a function of the temperature, matching the expected Nernst voltage. In order to improve the electrode performance on LWO PC-SOFCs, composite cathodes have been prepared by mixing the La0.8Sr0.2MnO3-delta (LSM) electronic phase with the LWO protonic phase. The ceramic-ceramic (cer-cer) composites have been electrochemically studied as cathodes on LWO dense electrolytes in symmetrical cells. Different ratios of both phases and two different electrode sintering temperatures (1050 and 1150 degrees C) have been studied. Electrochemical impedance spectroscopy (EIS) analysis has been carried out in the temperature range 700-900 degrees C under moist (2.5% H2O) atmospheres. Different oxygen partial pressures (pO(2)) have been employed in order to characterize the processes (surface reaction and charge transport) taking place at the composite cathode. A substantial improvement in the cathode performance has been attained by the addition of the LWO protonic phase into the LSM electronic material. From the electrochemical analysis it can be inferred that electrode enhancement is principally ascribed to the increase in the three-phase-boundary length, which enables electrochemical reactions to occur along the thickness of the electrode., Funding from European Union (FP7 Project EFFIPRO - Grant Agreement 227560), the Spanish Government (ENE2011-24761 and CSIC Intramural 200880I093 grants) is kindly acknowledged. The authors thank Dr M. Ivanova and Dr D. Sebold (Forschungszentrum Julich, IEK-1) for sample preparation for microscopy analysis, and Mrs M. Fabuel and Dr V. B. Vert for assistance in electrochemical tests.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Boosting the oxygen reduction reaction mechanisms in IT-SOFC cathodes by catalytic functionalization

  • Navarrete Algaba, Laura
  • Solis Díaz, Cecilia
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
A robust LSM-GDC composite was used as a backbone electrode for the infiltration of different catalysts, dispersed as oxide nanoparticles after firing. Catalyst candidates were screened using symmetric cells supported on the GDC electrolyte. Among the tested catalysts, praseodymium infiltration exhibited an outstanding and highly stable promotion effect of the oxygen reduction reaction. Impedance spectroscopy modelling provided insight into the nature of the distinct mechanisms limiting the cathode performance. The Pr-promotion in cathodes resulted in a fivefold rise in the power density peak when tested on a fully assembled anode-supported fuel cell., This work was financially supported by Spanish Government; ENE2011-24761 and SEV-2012-0267. Electron Microscopy Service of the UPV is also acknowledged and anode supported cells were kindly supplied by Forschungszentrum Julich.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Proton Transport through CPO-27 type Metal Organic Frameworks

  • Solis Díaz, Cecilia
  • Palaci, D.
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
In this work we studied the robustness of Ni-CPO-27 and Mg-CPO-27 metal organic frameworks (MOFs) upon cold uniaxial pressing and thermal cycling in dry and wet Ar/H-2. The preparation and operation limits for each material are found to be 225 and 150 MPa and temperatures of 250 and 150 degrees C for Ni-CPO-27 and Mg-CPO-27, respectively. The electrochemical alternating current conductivity measurements performed as high as 250 degrees C showed conductivity values ranging from 10(-6) to 10(-8) S/cm, depending on the material, temperature, and atmosphere. The protonic nature of the electrochemical transport phenomena was unambiguously confirmed via proton/deuteron isotopic and transient hydration studies. The study reveals high reproducibility and stability of the electrochemical measurements upon cycling in different atmospheres. Meanwhile, the crystallinity of the sample was preserved after the conductivity study and three weeks on stream, which demonstrates the midterm stability and robustness of this MOF., Financial support by the Spanish Government (ENE2011-24761, CSD-2009-0050, SEV-2012-0267, and MAT2011-29020-C02-01) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fast Oxygen Separation Through SO2- and CO2-Stable Dual-Phase Membrane Based on NiFe2O4-Ce0.8Tb0.2O2-delta

  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • García Fayos, Julio
  • Solis Díaz, Cecilia
Composite membranes with enhanced oxygen permeability and unprecedented stability in oxyfuel-like gas environments are reported. Specifically, 60 vol% NiFe2O4 - 40 vol% Ce0.8Tb0.2O2-delta (NFO-CTO) composite has been successfully obtained by one-pot fabrication method showing both spinel and fluorite pure phases. Narrow grain size distribution centered around 1 mu m and homogeneous distribution of grains is attained, as well as percolative pathways from side to side of the dual-phase membranes. The composite resisted a stability test in wet SO2 and CO2 containing gas at 800 degrees C for 170 h, which represents a step forward toward its use in oxyfuel power plants. The conductivity of both phases is investigated as a function of temperature and oxygen partial pressure (pO(2)). Oxygen separation in this kind of NFO-doped-ceria composite membranes occurs via the separate ambipolar transport through the two distinct percolating networks. Oxygen permeation flux values of 0.17 mL center dot min(-1)center dot cm(-2) and 0.20 mL center dot min(-1)center dot cm(-2) are achieved at 1000 degrees C when argon and pure CO2 are used as sweep gas, respectively, through a 0.68 mm-thick membrane. Experiments at 900 degrees C showed that the material is stable and effective in pure CO2 atmospheres and the oxygen permeation is even improved after 76 h on CO2 stream., Funding from the Spanish Government (ENE2011-24761 and SEV-2012-0267) and Instalaciones Inabensa SA. is kindly acknowledged. The support of the Servicio de Microscopia Electronica of the Universidad Politecnica de Valencia is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of Pr and Pr and Co doped La2NiO4+&amp, #948, as cathodes for La5.5WO11.25-&amp, #948, based protonic conducting fuel cells

  • Solis Díaz, Cecilia
  • Navarrete Algaba, Laura
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The mixed ionic-electronic conductor La2NiO4+delta was investigated as potential cathode material for protonic conducting solid oxide fuel cells (PC-SOFCs) based on La5.5WO11.25-delta electrolyte. Firstly the chemical compatibility between cathode and electrolyte phases (La2NiO4+delta and La5.5WO11.25-delta respectively) was studied. Then, the electrochemical properties of this cathode were improved by partially substituting La and/or Ni, specifically La1.5Pr0.5NiO4+delta and La(1.5)Pro(0.5)Nio(0.8)Co(0.2)O(4+delta) were considered. These two doped materials showed improved electrical conductivity and reduced polarization resistance, when tested as cathode in symmetrical cells. In a second step, the microstructure of La(1.5)Pro(0.5)Nio(0.8)Co(0.2)O(4+delta) was optimized by varying the firing temperature of the cathode. The performance of these mixed conductors is limited by medium frequencies associated processes while they show lower polarization resistances (Rp) than conventional composites based on La5.5WO11.25-delta and pure electronic conductors. La(1.5)Pro(0.5)Nio(0.8)Co(0.2)O(4+delta) cathode sintered at 1050 degrees C exhibits the best electrochemical performance on a La5.5WO11.25-delta-based PC-SOFC, achieving Rp = 0.62 Omega cm(2) at 750 degrees C in wet air., Funding from European Union (FP7 Project EFFIPRO - Grant agreement 227560), the Spanish Government (ENE2011-24761, SEV-2012-0267, BES-2012-053180 and CSIC Intramural 200880I093 grants) is kindly acknowledged. The authors thank M. Fabuel for sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis and Characterization of Nonsubstituted and Substituted Proton-Conducting La6xWO12-y

  • Seeger, Janka
  • Ivanova, Mariya E.
  • Meulenberg, Wilhelm A.
  • Sebold, Doris
  • Stoever, Detlev
  • Scherb, Tobias
  • Schumacher, Gerhard
  • Solis Díaz, Cecilia
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Mixed proton-electron conductors (MPEC) can be used as gas separation membranes to extract hydrogen from a gas stream, for example, in a power plant. From the different MPEC, the ceramic material lanthanum tungstate presents an important mixed protonic-electronic conductivity. Lanthanum tungstate La6-xWO12-y (with y = 1.5x + delta and x = 0.5-0.8) compounds were prepared with La/W ratios between 4.8 and 6.0 and sintered at temperatures between 1300 and 1500 degrees C in order to study the dependence of the single-phase formation region on the La/W ratio and temperature. Furthermore, compounds substituted in the La or W position were prepared. Ce, Nd, Tb, and Y were used for partial substitution at the La site, while Ir, Re, and Mo were applied for W substitution. All substituents were applied in different concentrations. The electrical conductivity of nonsubstituted La6-xWO12-y and for all substituted La6-xWO12-y compounds was measured in the temperature range of 400-900 degrees C in wet (2.5% H2O) and dry mixtures of 4% H-2 in Ar. The greatest improvement in the electrical characteristics was found in the case of 20 mol % substitution with both Re and Mo. After treatment in 100% H-2 at 800 degrees C, the compounds remained unchanged as confirmed with XRD, Raman, and SEM., The authors thank Dr. St. Roitsch for TEM analysis, Dr. W. Fischer and Mr. M. Ziegner for XRD analysis, and Dr. F. Tietz and Mrs. M.-T. Gerhards for thermal expansion analysis. Financial support from the Helmholtz Association through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) and the Spanish Ministry for Science and Innovation (Grants ENE2011-24761, CSD-2009-0050, and SEV-2012-0267) is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced oxygen diffusion in low barium-containing La0.2175Pr0.2175Ba0.145Sr0.4Fe0.8Co0.2O3−δ intermediate temperature solid oxide fuel cell cathodes

  • Vert Belenguer, Vicente Bernard
  • Serra Alfaro, José Manuel
  • Kilner, John A.
  • Burriel, Mónica
Isotopic tracer diffusion studies have been performed on the perovskite composition La0.2175Pr0.2175Ba0.145Sr0.4Fe0.8Co0.2O3−δ to obtain the diffusion and surface exchange coefficients for oxygen. This material has been identified as a highly active electrocatalytic cathode for intermediate temperature solid oxide fuel cells. The oxygen diffusion coefficients obtained in the 450–650 °C temperature range are higher than the ones measured for most of the cathode materials reported in the literature and they agree with those calculated from electrochemical impedance spectroscopy measurements performed on symmetrical cells., Funding from the Universitat Politècnica de València (grants FPI-UPV-2007-06 and PAID-00-10) and Spanish Government (grant ENE2011-24761) is kindly acknowledged. The research leading to these results has received funding from the European Union Seventh Framework Programme (FP7/2007-2013) under grant agreement n°: PIEF-GA-2009-252711 and from King Abdullah University of Science and Technology (KAUST) through a research grant., Peer reviewed