Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chronopotentiometric study of the transport of phosphoric acid anions through an anion-exchange membrane under different pH values

  • Gally, C.
  • Bernardes, A.M.
  • García Gabaldón, Montserrat|||0000-0003-4254-6733
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
[EN] Phosphate is the main cause of eutrophication in many water bodies. Its presence in waters is associated to the fact that is not completely removed in conventional wastewater treatment plants. On the other side, phosphate rocks are a non-renewable resource and considered as a critical raw material. A membrane separation process, able to recover phosphate from wastewater, is a promising process to avoid pollution and to reuse phosphate. This paper investigates the transport of salts of phosphoric acid through an anion-exchange membrane (AEM) by means of chronopotentiograms and polarization curves (CVCs). The presence of multiple transition times in the chronopotentiograms and the corresponding limiting current densities in the CVCs indicate a change in the species being transported in the membrane/diffusion boundary layer system, due to the hydrolysis reactions that take place when the concentration polarization is reached. Under the experimental conditions tested, coupled convection (gravitational and elctroconvection) occurs when a certain threshold in the membrane voltage drop is surpassed independently of the electrolyte concentration. However, at high pH values, only one transition time in the chronopotentiograms, due to the transfer of OH- ions with greater concentration and mobility. This fact is reflected in the CVCs by the large plateaus obtained, which hinders the occurrence of coupled convection phenomena, and consequently, water splitting can be considered as the main mechanism responsible for the overlimiting regime., The authors wish to thank the financial support from FINEP, FAPERGS, CAPES and CNPq (Brazil), from the BRICS-STI/CNPq (BRICS STI Framework Programme), from the European Union through the Erasmus Mundus Program (EBW +) and from the CYTED (Network 318RT0551).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tetra-uranium fluoride electrowinning by electro-electrodialysis cell (EED)

  • Cifuentes, Gerardo
  • Germain, Ignacio
  • Garrido, Belén
  • Cifuentes-Cabezas, Magdalena
  • Orrego, Pedro
  • Gentico, Iván
  • Pino, Eduardo
  • Calderón, Cristian
[EN] This work presents a novel electro-electrodialysis (EED) system for laboratory-scale uranium electrowinning based on a simple process of reactive electmdialysis of solutions of uranium (VI) oxide (UO3) dissolved in aqueous hydrofluoric acid (HF), leading to the formation of deposits of uranium tetrafluoride (UF4). For stainless steel cathodes, the best operating conditions for a concentration of 25 g/L for uranium were i = 40 A/m(2), T = 40 degrees C and 18 L/h electrolyte recirculation flowrate. The specific energy consumption (W) and current efficiency (p) for tetra uranium fluoride electrowinning was 4500 kWh/kg and 10.15%. When the cathodic metal was changed from stainless steel to aluminium, seeking to optimize the system, improved values of W and rho were achieved (645 kWh/kg and 68%, respectively). In the EED cells, the release of gaseous hydrogen is significantly lower for aluminum, due to its lower exchange current density (i(0)), with a magnitude of 10(-7) A/m(2). On the contrary, a considerable release of gaseous hydrogen is observed when the stainless-steel cathode is used, mainly due to the H+/H-2 reaction being catalysed by the stainless steel, inducing an increase in the acid consumption rate, devoting most of the energy consumed by the system in the proton reduction reaction. Polarization cathodic curves indicate that uranium has an estimate resting potential close to that of aluminium, which is -0.89 V. Finally, by chemical analysis (X-ray mass diffraction), UF4 and hydrated UF4 were identified as the main components of the electrodeposited product., The authors acknowledge with thanks the support given to this work by the Department of Nuclear Materials of the Chilean Commission of Nuclear Energy (CCHNE) and by the University of Santiago, Chile, DICYT 021841PL and USA1899 -VRIDEI 051914 CM_PAP, Vice-rectory of Research, Development and Innovation and the projects Red CYTED318RT0551 and ERAMIN 2 from ANID and European Union.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chemical Composition Data of the Main Stages of Copper Production from Sulfide Minerals in Chile: A Review to Assist Circular Economy Studies

  • Santana-Barros, Kayo
  • Vielmo, Vicente Schaeffer
  • Garrido Moreno, Belén
  • Riveros, Gabriel
  • Cifuentes, Gerardo
  • Moura Bernardes, Andrea
[EN] The mining industry has faced significant challenges to maintaining copper production technically, economically, and environmentally viable. Some of the major limitations that must be overcome in the coming years are the copper ore grade decline due to its intense exploitation, the increasing requirements for environmental protection, and the need to expand and construct new tailings dams. Furthermore, the risk of a supply crisis of critical metals, such as antimony and bismuth, has prompted efforts to increase their extraction from secondary resources in copper production. Therefore, improving conventional processes and developing new technologies is crucial to satisfying the world's metal demands, while respecting the policies of environmental organizations. Hence, it is essential that the chemical composition of each copper production stage is known for conducting these studies, which may be challenging due to the huge variability of concentration data concerning the ore extraction region, the process type, and the operational conditions. This paper presents a review of chemical composition data of the main stages of copper production from sulfide minerals, such as (1) copper minerals, (2) flotation tailings, (3) flotation concentrates, (4) slags and (5) flue dust from the smelting/converting stage, (6) copper anodes, (7) anode slimes, (8) contaminated electrolytes from the electrorefining stage, (9) electrolytes cleaned by ion-exchange resins, and (10) elution solutions from the resins. In addition, the main contributions of recent works on copper production are summarized herein. This study is focused on production sites from Chile since it is responsible for almost one-third of the world's copper production., This research was funded by CNPq (Process 160320/2019-4), Cyted (Network 318RT0551), ERAMIN2 (Network Sb-RECMEMTEC, FINEP--Brazil, ANID--Chile, and AEI--Spain) and Direccion de Investigacion Cientifica y TecnolOgica (DICYT) of the Universidad de Santiago de Chile. This study was financed in part by the Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior--Brasil (CAPES)--Finance Code 001 (Process 88887.364537/2019-00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Membrane electrolysis for recovering Sb and Bi from elution solutions of ion-exchange resins used in copper electrorefining: A cyclic voltammetric study

  • Santana-Barros, Kayo
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Machado, André Luiz Vargas
  • Vielmo, Vicente Schaeffer
  • Velizarov, Svetlozar
  • Ferreira, Jane Zoppas
  • Bernardes, Andrea Moura
[EN] Antimony (Sb) and bismuth (Bi), which have been considered critical raw materials by the European Commission, cause inconveniences to copper production when they are present as impurities in copper elec-trorefining solutions. Therefore, ion-exchange resins to extract Sb and Bi from copper-containing electrolytes have typically been applied; after the adsorption of the metals, the elution step is conducted with an HCl solu-tion to desorb them. In the present study, a novel membrane electrolysis system with a cation-exchange mem-brane was proposed to extract Sb and Bi ions from the elution solution, and a cyclic voltammetric study was carried out to evaluate the influence of the most important operating parameters on the process performance, such as Sb, Bi and HCl concentration, dilution factor of the solution, the presence of thiourea as a complexing agent, the presence of iron as an impurity, and temperature. The obtained voltammograms indicated that the simultaneous presence of the metals in solution alters considerably their electrodeposition and oxidation pat-tern when compared to the solutions with pure metals. The reactions of electrodeposition of both metals are not electrochemically reversible and the diffusion control for bismuth is greater than that for antimony. The increase in the concentration of Sb affects its electrodeposition kinetically, whereas that of Bi is affected both kinetically and thermodynamically. The increase in HCl concentration disfavors the electrodeposition of both metals. Diluting the solution reduces the energy consumption and prolongs the membrane lifespan. Increasing the temperature reduces the cathodic potential to deposit the metals but favors the hydrogen evolution reac-tion. The presence of iron as an impurity does not affect the electrodeposition of both metals, whereas the use of thiourea as a complexing agent must be avoided because it impairs their electrodeposition., The authors gratefully acknowledge the financial support given by the funding agencies Ministerio de Universidades de Espana (European Union-Next Generation EU), CNPq (Process 160320/2019-4), Cyted (Network 318RT0551), ERAMIN2 (Network Sb-RECMEMTEC, FINEP-Brazil, ANID-Chile, and Agencia Estatal de Investigacion (AEI) - Spain), Direccin de Investigacion Cientifica y Tecnologica (DICYT) of the Universidad de Santiago de Chile, UFRGS (BIC-IQR838393LRG), Agencia Estatal de Investigacion (AEI) - Spain, through the project PCI2019-103535 (Co-funded by the European Regional Development Fund (FEDER), a way to build Europe). This study was financed in part by the Coordencao de Aperfeicoamento de Pessoal de Nivel Superior-Brasil (CAPES) - Finance Code 001 (Process 88887.364537/2019-00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Investigation of ion-exchange membranes by means of chronopotentiometry: A comprehensive review on this highly informative and multipurpose technique

  • Santana-Barros, Kayo
  • Martí Calatayud, Manuel César|||0000-0002-0745-1918
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Scarazzato, Tatiana
  • Moura Bernardes, Andréa
  • Espinosa, Denise Crocce Romano
[EN] Electrodialysis is mostly used for drinking water production but it has gained applicability in different new fields in recent decades. Membrane characteristics and ion transport properties strongly influence the efficiency of electrodialysis and must be evaluated to avoid an intense energy consumption and ensure long membrane times of usage. To this aim, conducting studies on ion transport across membranes is essential. Several dynamic characterization methods can be employed, among which, chronopotentiometry has shown special relevance because it allows a direct access to the contribution of the potential in different states of the membrane/solution system. The present paper provides a critical review on the use of chronopotentiometry to determine the main membrane transport properties and to evaluate mass transfer phenomena. Properties, such as limiting current density, electrical resistances, plateau length, transport number of counter-ions in the membrane, transition times, and apparent fraction of membrane conductive area have been intensively discussed in the literature and are presented in this review. Some of the phenomena evaluated using this technique are concentration polarization, gravitational convection, electroconvection, water dissociation, and fouling/scaling, all of them also shown herein. Mathematical and experimental studies were considered. New trends in chronopotentiometric studies should include ion-exchange membranes that have been recently developed (presenting anti-fouling, anti-microbial, and monovalent-selective properties) and a deeper discussion on the behaviour of complex solutions that have been often treated by electrodialysis, such as municipal wastewaters. New mathematical models, especially 3D ones, are also expected to be developed in the coming years., The authors gratefully acknowledge the financial support given by the Brazilian funding agencies CNPq (Process 141346/2016-7, 171241/2017-7, and 160320/2019-4), FAPESP (Process 2012/51871-9) and CAPES (Process 88881.190502/2018-01 and 88887.362657/2019-00). The financial support of Cyted (Network 318RT0551) and ERAMIN2 (FINEP, Brazil and AEI, Spain) is also acknowledged. This study was financed in part by the Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior - Brasil (CAPES) -Finance Code 001.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Trade-off between operating time and energy consumption in pulsed electric field electrodialysis: A comprehensive simulation study

  • Martí Calatayud, Manuel César|||0000-0002-0745-1918
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Sancho-Cirer Poczatek, Mario
[EN] Electrodialysis (ED) has been recently introduced in a variety of processes where the recovery of valuable resources is needed; thus, enabling sustainable production routes for a circular economy. However, new applications of ED require optimized operating modes ensuring low energy consumptions. The application of pulsed electric field (PEF) electrodialysis has been demonstrated to be an effective option to modulate concentration polarization and reduce energy consumption in ED systems, but the savings in energy are usually attained by extending the operating time. In the present work, we conduct a comprehensive simulation study about the effects of PEF signal parameters on the time and energy consumption associated with ED processes. Ion transport of NaCl solutions through homogeneous cation-exchange membranes is simulated using a 1-D model solved by a finite-difference method. Increasing the pulse frequency up to a threshold value is effective in reducing the specific energy consumption, with threshold frequencies increasing with the applied current density. Varying the duty cycle causes opposed effects in the time and energy usage needed for a given ED operation. More interestingly, a new mode of PEF functions with the application of low values of current during the relaxation phases has been investigated. This novel PEF strategy has been demonstrated to simultaneously improve the time and the specific energy consumption of ED processes., The authors acknowledge the support of the Ibero-American CYTED network 318RT0551.