Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chemical Composition Data of the Main Stages of Copper Production from Sulfide Minerals in Chile: A Review to Assist Circular Economy Studies

  • Santana-Barros, Kayo
  • Vielmo, Vicente Schaeffer
  • Garrido Moreno, Belén
  • Riveros, Gabriel
  • Cifuentes, Gerardo
  • Moura Bernardes, Andrea
[EN] The mining industry has faced significant challenges to maintaining copper production technically, economically, and environmentally viable. Some of the major limitations that must be overcome in the coming years are the copper ore grade decline due to its intense exploitation, the increasing requirements for environmental protection, and the need to expand and construct new tailings dams. Furthermore, the risk of a supply crisis of critical metals, such as antimony and bismuth, has prompted efforts to increase their extraction from secondary resources in copper production. Therefore, improving conventional processes and developing new technologies is crucial to satisfying the world's metal demands, while respecting the policies of environmental organizations. Hence, it is essential that the chemical composition of each copper production stage is known for conducting these studies, which may be challenging due to the huge variability of concentration data concerning the ore extraction region, the process type, and the operational conditions. This paper presents a review of chemical composition data of the main stages of copper production from sulfide minerals, such as (1) copper minerals, (2) flotation tailings, (3) flotation concentrates, (4) slags and (5) flue dust from the smelting/converting stage, (6) copper anodes, (7) anode slimes, (8) contaminated electrolytes from the electrorefining stage, (9) electrolytes cleaned by ion-exchange resins, and (10) elution solutions from the resins. In addition, the main contributions of recent works on copper production are summarized herein. This study is focused on production sites from Chile since it is responsible for almost one-third of the world's copper production., This research was funded by CNPq (Process 160320/2019-4), Cyted (Network 318RT0551), ERAMIN2 (Network Sb-RECMEMTEC, FINEP--Brazil, ANID--Chile, and AEI--Spain) and Direccion de Investigacion Cientifica y TecnolOgica (DICYT) of the Universidad de Santiago de Chile. This study was financed in part by the Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior--Brasil (CAPES)--Finance Code 001 (Process 88887.364537/2019-00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Membrane electrolysis for recovering Sb and Bi from elution solutions of ion-exchange resins used in copper electrorefining: A cyclic voltammetric study

  • Santana-Barros, Kayo
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Machado, André Luiz Vargas
  • Vielmo, Vicente Schaeffer
  • Velizarov, Svetlozar
  • Ferreira, Jane Zoppas
  • Bernardes, Andrea Moura
[EN] Antimony (Sb) and bismuth (Bi), which have been considered critical raw materials by the European Commission, cause inconveniences to copper production when they are present as impurities in copper elec-trorefining solutions. Therefore, ion-exchange resins to extract Sb and Bi from copper-containing electrolytes have typically been applied; after the adsorption of the metals, the elution step is conducted with an HCl solu-tion to desorb them. In the present study, a novel membrane electrolysis system with a cation-exchange mem-brane was proposed to extract Sb and Bi ions from the elution solution, and a cyclic voltammetric study was carried out to evaluate the influence of the most important operating parameters on the process performance, such as Sb, Bi and HCl concentration, dilution factor of the solution, the presence of thiourea as a complexing agent, the presence of iron as an impurity, and temperature. The obtained voltammograms indicated that the simultaneous presence of the metals in solution alters considerably their electrodeposition and oxidation pat-tern when compared to the solutions with pure metals. The reactions of electrodeposition of both metals are not electrochemically reversible and the diffusion control for bismuth is greater than that for antimony. The increase in the concentration of Sb affects its electrodeposition kinetically, whereas that of Bi is affected both kinetically and thermodynamically. The increase in HCl concentration disfavors the electrodeposition of both metals. Diluting the solution reduces the energy consumption and prolongs the membrane lifespan. Increasing the temperature reduces the cathodic potential to deposit the metals but favors the hydrogen evolution reac-tion. The presence of iron as an impurity does not affect the electrodeposition of both metals, whereas the use of thiourea as a complexing agent must be avoided because it impairs their electrodeposition., The authors gratefully acknowledge the financial support given by the funding agencies Ministerio de Universidades de Espana (European Union-Next Generation EU), CNPq (Process 160320/2019-4), Cyted (Network 318RT0551), ERAMIN2 (Network Sb-RECMEMTEC, FINEP-Brazil, ANID-Chile, and Agencia Estatal de Investigacion (AEI) - Spain), Direccin de Investigacion Cientifica y Tecnologica (DICYT) of the Universidad de Santiago de Chile, UFRGS (BIC-IQR838393LRG), Agencia Estatal de Investigacion (AEI) - Spain, through the project PCI2019-103535 (Co-funded by the European Regional Development Fund (FEDER), a way to build Europe). This study was financed in part by the Coordencao de Aperfeicoamento de Pessoal de Nivel Superior-Brasil (CAPES) - Finance Code 001 (Process 88887.364537/2019-00).