Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tetra-uranium fluoride electrowinning by electro-electrodialysis cell (EED)

  • Cifuentes, Gerardo
  • Germain, Ignacio
  • Garrido, Belén
  • Cifuentes-Cabezas, Magdalena
  • Orrego, Pedro
  • Gentico, Iván
  • Pino, Eduardo
  • Calderón, Cristian
[EN] This work presents a novel electro-electrodialysis (EED) system for laboratory-scale uranium electrowinning based on a simple process of reactive electmdialysis of solutions of uranium (VI) oxide (UO3) dissolved in aqueous hydrofluoric acid (HF), leading to the formation of deposits of uranium tetrafluoride (UF4). For stainless steel cathodes, the best operating conditions for a concentration of 25 g/L for uranium were i = 40 A/m(2), T = 40 degrees C and 18 L/h electrolyte recirculation flowrate. The specific energy consumption (W) and current efficiency (p) for tetra uranium fluoride electrowinning was 4500 kWh/kg and 10.15%. When the cathodic metal was changed from stainless steel to aluminium, seeking to optimize the system, improved values of W and rho were achieved (645 kWh/kg and 68%, respectively). In the EED cells, the release of gaseous hydrogen is significantly lower for aluminum, due to its lower exchange current density (i(0)), with a magnitude of 10(-7) A/m(2). On the contrary, a considerable release of gaseous hydrogen is observed when the stainless-steel cathode is used, mainly due to the H+/H-2 reaction being catalysed by the stainless steel, inducing an increase in the acid consumption rate, devoting most of the energy consumed by the system in the proton reduction reaction. Polarization cathodic curves indicate that uranium has an estimate resting potential close to that of aluminium, which is -0.89 V. Finally, by chemical analysis (X-ray mass diffraction), UF4 and hydrated UF4 were identified as the main components of the electrodeposited product., The authors acknowledge with thanks the support given to this work by the Department of Nuclear Materials of the Chilean Commission of Nuclear Energy (CCHNE) and by the University of Santiago, Chile, DICYT 021841PL and USA1899 -VRIDEI 051914 CM_PAP, Vice-rectory of Research, Development and Innovation and the projects Red CYTED318RT0551 and ERAMIN 2 from ANID and European Union.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Membrane electrolysis for recovering Sb and Bi from elution solutions of ion-exchange resins used in copper electrorefining: A cyclic voltammetric study

  • Santana-Barros, Kayo
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Machado, André Luiz Vargas
  • Vielmo, Vicente Schaeffer
  • Velizarov, Svetlozar
  • Ferreira, Jane Zoppas
  • Bernardes, Andrea Moura
[EN] Antimony (Sb) and bismuth (Bi), which have been considered critical raw materials by the European Commission, cause inconveniences to copper production when they are present as impurities in copper elec-trorefining solutions. Therefore, ion-exchange resins to extract Sb and Bi from copper-containing electrolytes have typically been applied; after the adsorption of the metals, the elution step is conducted with an HCl solu-tion to desorb them. In the present study, a novel membrane electrolysis system with a cation-exchange mem-brane was proposed to extract Sb and Bi ions from the elution solution, and a cyclic voltammetric study was carried out to evaluate the influence of the most important operating parameters on the process performance, such as Sb, Bi and HCl concentration, dilution factor of the solution, the presence of thiourea as a complexing agent, the presence of iron as an impurity, and temperature. The obtained voltammograms indicated that the simultaneous presence of the metals in solution alters considerably their electrodeposition and oxidation pat-tern when compared to the solutions with pure metals. The reactions of electrodeposition of both metals are not electrochemically reversible and the diffusion control for bismuth is greater than that for antimony. The increase in the concentration of Sb affects its electrodeposition kinetically, whereas that of Bi is affected both kinetically and thermodynamically. The increase in HCl concentration disfavors the electrodeposition of both metals. Diluting the solution reduces the energy consumption and prolongs the membrane lifespan. Increasing the temperature reduces the cathodic potential to deposit the metals but favors the hydrogen evolution reac-tion. The presence of iron as an impurity does not affect the electrodeposition of both metals, whereas the use of thiourea as a complexing agent must be avoided because it impairs their electrodeposition., The authors gratefully acknowledge the financial support given by the funding agencies Ministerio de Universidades de Espana (European Union-Next Generation EU), CNPq (Process 160320/2019-4), Cyted (Network 318RT0551), ERAMIN2 (Network Sb-RECMEMTEC, FINEP-Brazil, ANID-Chile, and Agencia Estatal de Investigacion (AEI) - Spain), Direccin de Investigacion Cientifica y Tecnologica (DICYT) of the Universidad de Santiago de Chile, UFRGS (BIC-IQR838393LRG), Agencia Estatal de Investigacion (AEI) - Spain, through the project PCI2019-103535 (Co-funded by the European Regional Development Fund (FEDER), a way to build Europe). This study was financed in part by the Coordencao de Aperfeicoamento de Pessoal de Nivel Superior-Brasil (CAPES) - Finance Code 001 (Process 88887.364537/2019-00).