Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Role of the Lactide, Glycolide Ratio in PLGA Nanoparticle Stability and Release under Lysosomal Conditions for Enzyme Replacement Therapy of Lysosomal Storage Disorders

  • del Moral, Maria
  • Loeck, Maximilian
  • Muntimadugu, Eameema|||0000-0001-6942-2189
  • Vives, Guillem
  • Pham, Vy
  • Pfeifer, Peter
  • Battaglia, Giuseppe|||0000-0003-3349-6770
  • Muro, Silvia|||0000-0003-1900-352X
Prior studies demonstrated that encapsulation in poly(lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) enhanced the delivery of enzymes used for replacement therapy (ERT) of lysosomal storage disorders (LSDs). This study examined how the copolymer lactide:glycolide ratio impacts encapsulation, physicochemical characteristics, stability, and release under lysosomal conditions. Hyaluronidase, deficient in mucopolysaccharidosis IX, was encapsulated in NPs synthesized using 50:50, 60:40, or 75:25 lactide:glycolide copolymers. All NPs had diameters compatible with cellular transport (≤168 nm) and polydispersity indexes (≤0.16) and ζ-potentials (≤-35 mV) compatible with colloidal stability. Yet, their encapsulation efficiency varied, with 75:25 NPs and 60:40 NPs having the lowest and highest EE, respectively (15% vs. 28%). Under lysosomal conditions, the 50:50 copolymer degraded fastest (41% in 1 week), as expected, and the presence of a targeting antibody coat did not alter this result. Additionally, 60:40 NPs destabilized fastest (<1 week) because of their smaller diameter, and 75:25 NPs did not destabilize in 4 weeks. All formulations presented burst release under lysosomal conditions (56-78% of the original load within 30 min), with 50:50 and 60:40 NPs releasing an additional small fraction after week 1. This provided 4 weeks of sustained catalytic activity, sufficient to fully degrade a substrate. Altogether, the 60:40 NP formulation is preferred given its higher EE, and 50:50 NPs represent a valid alternative, while the highest stability of 75:25 NPs may impair lysosomes. These results can guide future studies aiming to translate PLGA NP-based ERT for this and other LSDs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Urease-powered nanobots for radionuclide bladder cancer therapy

  • Simó, Cristina|||0000-0002-5980-9379
  • Serra-Casablancas, Meritxell|||0000-0003-4806-3249
  • Hortelão, A. C. L.|||0000-0001-9269-0480
  • Di Carlo, Valerio|||0000-0002-5099-0685
  • Guallar Garrido, Sandra|||0000-0002-9666-5757
  • Plaza-García, Sandra
  • Rabanal Prados, Rosa Ma|||0000-0002-9521-791X
  • Ramos-Cabrer, Pedro|||0000-0003-0368-7031
  • Yagüe, Balbino
  • Aguado, Laura
  • Bardia, Lídia
  • Tosi, Sébastien
  • Gómez Vallejo, Vanessa|||0000-0003-3995-9596
  • Martín, Abraham
  • Patiño, Tania|||0000-0001-9979-7926
  • Julián, Esther|||0000-0002-6558-3978
  • Colombelli, Julien|||0000-0002-2784-4276
  • Llop, Jordi|||0000-0002-0821-9838
  • Sánchez Ordóñez, Samuel|||0000-0001-9713-9997
Bladder cancer treatment via intravesical drug administration achieves reasonable survival rates but suffers from low therapeutic efficacy. To address the latter, self-propelled nanoparticles or nanobots have been proposed, taking advantage of their enhanced diffusion and mixing capabilities in urine when compared with conventional drugs or passive nanoparticles. However, the translational capabilities of nanobots in treating bladder cancer are underexplored. Here, we tested radiolabelled mesoporous silica-based urease-powered nanobots in an orthotopic mouse model of bladder cancer. In vivo and ex vivo results demonstrated enhanced nanobot accumulation at the tumour site, with an eightfold increase revealed by positron emission tomography in vivo. Label-free optical contrast based on polarization-dependent scattered light-sheet microscopy of cleared bladders confirmed tumour penetration by nanobots ex vivo. Treating tumour-bearing mice with intravesically administered radio-iodinated nanobots for radionuclide therapy resulted in a tumour size reduction of about 90%, positioning nanobots as efficient delivery nanosystems for bladder cancer therapy. Bladder cancer treatment suffers from low therapeutic efficacy. Here the authors present radioactive 131 I-labelled urease-powered nanobots that exhibit enhanced accumulation at the tumour site, enabling effective radionuclide therapy at low doses as an alternative treatment option for bladder cancer.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanorods Based on Mesoporous Silica Containing Iron OxideNanoparticles as Catalytic Nanomotors: Study of Motion Dynamics

  • Mestre, Rafael
  • Cadefau, Núria
  • Hortelão, Ana C.
  • Grzelak, Jan Jacek
  • Gich, Martí
  • Roig Serra, Anna
  • Sánchez, Samuel
Self‐propelled particles and, in particular, those based on mesoporous silica, have raised considerable interest due to their potential applications in the environmental and biomedical fields thanks to their biocompatibility, tunable surface chemistry and large porosity. Although spherical particles have been widely used to fabricate nano‐ and micromotors, not much attention has been paid to other geometries, such as nanorods. Here, we report the fabrication of self‐propelled mesoporous silica nanorods (MSNRs) that move by the catalytic decomposition of hydrogen peroxide by a sputtered Pt layer, Fe2O3 nanoparticles grown within the mesopores, or the synergistic combination of both. We show that motion can occur in two distinct sub‐populations characterized by two different motion dynamics, namely enhanced diffusion or directional propulsion, especially when both catalysts are used. These results open up the possibility of using MSNRs as chassis for the fabrication of self‐propelled particles for the environmental or biomedical fields., R.M. thanks “la Caixa” Foundation through IBEC International PhD Programme “la Caixa” Severo Ochoa fellowships (code LCF/BQ/SO16/52270018). A.C.H. thanks MINECO for the Severo Ochoa PhD fellowship. J.G. has received financial support through the “la Caixa” INPhINIT Fellowship Grant for Doctoral Studies at Spanish Research Centers of Excellence (Grant code: LCF/BQ/DI17/11620041), “la Caixa” Banking Foundation (ID100010434), Barcelona, Spain. The CERCA program by the Generalitat de Catalunya, the Secretaria d′Universitats i Recerca del Departament d′Empresa i Coneixement de la Generalitat de Catalunya through the projects 2017SGR1148 & 2017SGR765 are acknowledged, as well as the Ministerio de Ciencia, Innovación y Universidades (MCIU)/Agencia Estatal de Investigación (AEI)/Fondo Europeo de Desarrollo Regional (FEDER, UE) through the projects RTI2018‐098164‐B‐I00 & RTI2018‐096273‐B‐I00 and Severo Ochoa Programme for Centres of Excellence in R&D (CEX2019‐000917‐S and CEX2018‐000789‐S). This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement No 866348)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stochastic modulation evidences a transitory EGF-Ras-ERK MAPK activity induced by PRMT5

  • Jurado, Maria José
  • Castaño, Oscar
  • Zorzano, Antonio
The extracellular signal-regulated kinase (ERK) mitogen-activated protein kinase (MAPK) pathway involves a three-step cascade of kinases that transduce signals and promote processes such as cell growth, development, and apoptosis. An aberrant response of this pathway is related to the proliferation of cell diseases and tumors. By using simulation modeling, we document that the protein arginine methyltransferase 5 (PRMT5) modulates the MAPK pathway and thus avoids an aberrant behavior. PRMT5 methylates the Raf kinase, reducing its catalytic activity and thereby, reducing the activation of ERK in time and amplitude. Two minimal computational models of the epidermal growth factor (EGF)-Ras-ERK MAPK pathway influenced by PRMT5 were proposed: a first model in which PRMT5 is activated by EGF and a second one in which PRMT5 is stimulated by the cascade response. The reported results show that PRMT5 reduces the time duration and the expression of the activated ERK in both cases, but only in the first model PRMT5 limits the EGF range that generates an ERK activation. Based on our data, we propose the protein PRMT5 as a regulatory factor to develop strategies to fight against an excessive activity of the MAPK pathway, which could be of use in chronic diseases and cancer., This study was supported by grants from the MICINN (SAF2016-75246R and RTI2018-097038-B- C22), the Generalitat de Catalunya (Grants 2017 SGR 1015, ICREA Acadèmia), and CIBERDEM. We gratefully acknowledge institutional funding from the MICINN through the Centres of Excellence Severo Ochoa Award (CEX2018-000789-S, 2019-2023 and CEX 2019-000913-S, 2020-2024), and from the CERCA Programme of the Generalitat de Catalunya. M.J. thanks MICINN for the FPI contract BES-2011-043331- M.J. also thanks Ramón Reigada and Ma Ángeles Serrano their contribution in the conception of the initial idea of the present study.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Conductive Bacterial Nanocellulose-Polypyrrole Patches Promote Cardiomyocyte Differentiation

  • Srinivasan, Sumithra Y.
  • Cler, Marina
  • Zapata Arteaga, Osnat
  • Dörling, Bernhard
  • Campoy Quiles, Mariano
  • Martínez Fernández, Elena
  • Engel, Elisabeth
  • Pérez Amodio, Soledad
  • Laromaine, Anna
The low endogenous regenerative capacity of the heart, added to the prevalence of cardiovascular diseases, triggered the advent of cardiac tissue engineering in the last decades. The myocardial niche plays a critical role in directing the function and fate of cardiomyocytes; therefore, engineering a biomimetic scaffold holds excellent promise. We produced an electroconductive cardiac patch of bacterial nanocellulose (BC) with polypyrrole nanoparticles (Ppy NPs) to mimic the natural myocardial microenvironment. BC offers a 3D interconnected fiber structure with high flexibility, which is ideal for hosting Ppy nanoparticles. BC-Ppy composites were produced by decorating the network of BC fibers (65 ± 12 nm) with conductive Ppy nanoparticles (83 ± 8 nm). Ppy NPs effectively augment the conductivity, surface roughness, and thickness of BC composites despite reducing scaffolds' transparency. BC-Ppy composites were flexible (up to 10 mM Ppy), maintained their intricate 3D extracellular matrix-like mesh structure in all Ppy concentrations tested, and displayed electrical conductivities in the range of native cardiac tissue. Furthermore, these materials exhibit tensile strength, surface roughness, and wettability values appropriate for their final use as cardiac patches. In vitro experiments with cardiac fibroblasts and H9c2 cells confirmed the exceptional biocompatibility of BC-Ppy composites. BC-Ppy scaffolds improved cell viability and attachment, promoting a desirable cardiomyoblast morphology. Biochemical analyses revealed that H9c2 cells showed different cardiomyocyte phenotypes and distinct levels of maturity depending on the amount of Ppy in the substrate used. Specifically, the employment of BC-Ppy composites drives partial H9c2 differentiation toward a cardiomyocyte-like phenotype. The scaffolds increase the expression of functional cardiac markers in H9c2 cells, indicative of a higher differentiation efficiency, which is not observed with plain BC. Our results highlight the remarkable potential use of BC-Ppy scaffolds as a cardiac patch in tissue regenerative therapies., This work was supported by the Spanish Ministry of Science and Innovation (MICINN) through the National Research Agency (AEI) and European Regional Development Funds (ERDF/FEDER), project BIOCARDIO ref RTI2018-096320–B-C21, project BIOSOFT-REGE ref PID2021-122645OB-I00, the CERCA Program/Generalitat de Catalunya, the ‘Severo Ochoa’ Programme for Center of Excellence in R&D (CEX2019-000917), the Programme/Generalitat de Catalunya (2017-SGR-359), the Severo Ochoa Programme of the Spanish Ministry of Science and Innovation (MICINN─Grant SEV-2014–0425, 2015–2019 and CEX2018–000,789-S, 2019–2023), and the projects FIP-PALOMA, FIP-BEAT, and the PDC2022-133755-I00/AEI/10.13039/501100011033 European Union NextGeneration EU/PRTR. This research was also supported by the European Union’s Horizon 2020 research and innovation program H2020-MSCA-COFUND-2016 (DOC-FAM, Grant Agreement No. 754397). This project also received the support of a La Caixa INPhINIT Fellowship (ID 100010434) with project code LCF/BQ/DR19/11740025. S.Y.S. is enrolled in the Materials Science Ph.D. program of the UAB. S.Y.S. and A.L. participate in the Spanish National Research Council (CSIC) interdisciplinary platform for sustainable plastics towards a circular economy (SusPlast), in the Aerogels COST ACTION (CA 18125), and in CSIC-Conexión Nanomedicine, EPNOE network, and Red Nanocare 2.0. The authors acknowledge the use of Biorender.com., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoscale Operando Characterization of Electrolyte-Gated Organic Field-Effect Transistors Reveals Charge Transport Bottlenecks

  • Tanwar, Shubham
  • Millan Solsona, Ruben
  • Ruiz Molina, Sara
  • Mas Torrent, Marta
  • Kyndiah, Adrica
  • Gomila, Gabriel
Charge transport in electrolyte-gated organic field-effect transistors (EGOFETs) is governed by the microstructural property of the semiconducting thin film that is in direct contact with the electrolyte. Therefore, a comprehensive nanoscale operando characterization of the active channel is crucial to pinpoint various charge transport bottlenecks for rational and targeted optimization of the devices. Here, the local electrical properties of EGOFETs are systematically probed by in-liquid scanning dielectric microscopy (in-liquid SDM) and a direct picture of their functional mechanism at the nanoscale is provided across all operational regimes, starting from subthreshold, linear to saturation, until the onset of pinch-off. To this end, a robust interpretation framework of in-liquid SDM is introduced that enables quantitative local electric potential mapping directly from raw experimental data without requiring calibration or numerical simulations. Based on this development, a straightforward nanoscale assessment of various charge transport bottlenecks is performed, like contact access resistances, inter- and intradomain charge transport, microstructural inhomogeneities, and conduction anisotropy, which have been inaccessible earlier. Present results contribute to the fundamental understanding of charge transport in electrolyte-gated transistors and promote the development of direct structure-property-function relationships to guide future design rules., This work had received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 81386 (BORGES), from the European Horizon-EIC program under Grant Agreement No. 101046719 (PRINGLE) and by the Spanish Ministerio de Economıa, Industria y Competitividad, and the EU FEDER, through Grant Nos. PID2019-110210GB-I00 (BIGDATASPM) and PID2019-111682RB-I00 (GENESIS), and the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE Grant Nos. CEX2019-000917-S and CEX2018-000789-S). The authors also acknowledge support from the Generalitat de Catalunya through Grant No. 2021SGR-00453 and the CERCA Program. G.G. acknowledges support from the ICREA Academia program. S.T. acknowledges the support from Joerg Barner (JPK) regarding automating the AFM operations. The authors would like to thank Prof. T. Cramer for providing the measurement software that allowed the macroscale I–V characterization of the EGOFETs., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improved Performance of Biohybrid Muscle-Based Bio-Bots Doped with Piezoelectric Boron Nitride Nanotubes

  • Mestre, Rafael
  • Fuentes, Judith
  • Lefaix, Laura
  • Wang, Jiaojiao
  • Guix, Maria
  • Murillo Rodríguez, Gonzalo
  • Bashir, Rashid
  • Sánchez, Samuel
Biohybrid robots, or bio-bots, integrate living and synthetic materials following a synergistic strategy to acquire some of the unique properties of biological organisms, like adaptability or bio-sensing, which are difficult to obtain exclusively using artificial materials. Skeletal muscle is one of the preferred candidates to power bio-bots, enabling a wide variety of movements from walking to swimming. Conductive nanocomposites, like gold nanoparticles or graphene, can provide benefits to muscle cells by improving the scaffolds’ mechanical and conductive properties. Here, boron nitride nanotubes (BNNTs), with piezoelectric properties, are integrated in muscle-based bio-bots and an improvement in their force output and motion speed is demonstrated. A full characterization of the BNNTs is provided, and their piezoelectric behavior with piezometer and dynamometer measurements is confirmed. It is hypothesized that the improved performance is a result of an electric field generated by the nanocomposites due to stresses produced by the cells during differentiation. This hypothesis is backed with finite element simulations supporting that this stress can generate a non-zero electric field within the matrix. With this work, it is shown that the integration of nanocomposite into muscle-based bio-bots can improve their performance, paving the way toward stronger and faster bio-hybrid robots., R.M. thanks “la Caixa” Foundation through IBEC International PhD Programme la Caixa Severo Ochoa fellowships (code LCF/BQ/SO16/52270018 and UK Research and Innovation (UKRI) grant reference MR/S032711/1). M.G. thanks MINECO for the Juan de la Cierva fellowship (IJCI2016-30451), the Beatriu de Pinós Programme (2018-BP-00305), and the Ministry of Business and Knowledge of the Government of Catalonia. The research leading to these results has received funding from the grant RTI2018-098164-B-I00 funded by MICIN/AEI/10.13039/5011000110333 and by “FEDER Una manera de hacer Europa” (BOTSinFluids project), the CERCA program by the Generalitat de Catalunya, the Secretaria d'Universitats i Recerca del Departament d'Empresa i Coneixement de la Generalitat de Catalunya through the project 2017 SGR 1148, and the “Centro de Excelencia Severo Ochoa”, funded by Agencia Estatal de Investigación (CEX2018-000789-S). This project has also received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement No 866348; i-NanoSwarms). G.M. thanks La Caixa Foundation for the Junior Leader Retaining Fellowship program (LCF/BQ/ PR19/11700010) and MINECO for the Ramon y Cajal Fellowship (RYC2020-030501-I). This study was supported by the Agencia Estatal de Investigación from Spanish Government (PID2020-119350RA-I00, MICROBIO project) and the European Union - NextGenerationEU (EUR2020-112082, PIEZO2CELL). The work done at UIUC was funded by NSF EFRI C3 SoRo No. 1830881 and with support from the NSF Science and Technology Center Emergent Behavior of Integrated Cellular Systems (Grant No. CBET0939511)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2018-000789-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D Printing as a Strategy to Scale-Up Biohybrid Hydrogels for T Cell Manufacture

  • Pérez Del Río, Eduardo
  • Rey Vinolas, Sergi
  • Santos, Fabião
  • Castellote Borrell, Miquel
  • Merlina, Francesca
  • Veciana, Jaume
  • Ratera, Immaculada
  • Mateos Timoneda, Miguel A.
  • Engel, Elisabeth
  • Guasch, Judith
The emergence of cellular immunotherapy treatments is introducing more efficient strategies to combat cancer as well as autoimmune and infectious diseases. However, the cellular manufacturing procedures associated with these therapies remain costly and time-consuming, thus limiting their applicability. Recently, lymph-node-inspired PEG-heparin hydrogels have been demonstrated to improve primary human T cell culture at the laboratory scale. To go one step further in their clinical applicability, we assessed their scalability, which was successfully achieved by 3D printing. Thus, we were able to improve primary human T cell infiltration in the biohybrid PEG-heparin hydrogels, as well as increase nutrient, waste, and gas transport, resulting in higher primary human T cell proliferation rates while maintaining the phenotype. Thus, we moved one step further toward meeting the requirements needed to improve the manufacture of the cellular products used in cellular immunotherapies., This research was funded by the Spanish Ministry of Science and Innovation (PID2020-115296RA-I00; PID2019-105622RB-I00; PID2021-128412OB-I00 European Union NextGenerationEU/PRTR, and the “Ramón y Cajal” program (RYC-2017-22614)) as well as the Generalitat de Catalunya (SGRCat 2021-00438; 2017-SGR-359; Tecnologies Emergents program of the General Directorate for Research – Nr. 001-P-001646, cofunded with FEDER Operational Program of Catalonia 2014–2020). The work was also supported by the Max Planck Society through the Max Planck Partner Group “Dynamic Biomimetics for Cancer Immunotherapy” in collaboration with the Max Planck Institute for Medical Research (Heidelberg, Germany). The authors are grateful for the financial support received from Instituto de Salud Carlos III through Consorcio Centro de Investigación Biomédica en Red (CIBER) with the project “Gels4ACT” (Nr. BBN20PIV02). This research was also supported by the European Union’s Horizon 2020 research and innovation program H2020-MSCA-COFUND-2016 (DOC-FAM, grant agreement Nr. 754397). The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the “Severo Ochoa” Program for Centres of Excellence in R&D (CEX2023-001263-S, CEX2019-000917-S and CEX2018-000789-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S). With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boosting the efficiency of photoactive rod-shaped nanomotors via magnetic field-induced charge separation

  • Ferrer Campos, Rebeca
  • Bakenecker, Anna C.
  • Chen, Yufen
  • Spadaro, Maria Chiara
  • Fraire, Juan
  • Arbiol, Jordi
  • Sánchez, Samuel
  • Villa, Katherine
Photocatalytic nanomotors have attracted a lot of attention because of their unique capacity to simultaneously convert light and chemical energy into mechanical motion with a fast photoresponse. Recent discoveries demonstrate that the integration of optical and magnetic components within a single nanomotor platform offers novel advantages for precise motion control and enhanced photocatalytic performance. Despite these advancements, the impact of magnetic fields on energy transfer dynamics in photocatalytic nanomotors remains unexplored. Here, we introduce dual-responsive rod-like nanomotors, made of a TiO2/NiFe heterojunction, able to (i) self-propel upon irradiation, (ii) align with the direction of an external magnetic field, and (iii) exhibit enhanced photocatalytic performance. Consequently, when combining light irradiation with a homogeneous magnetic field, these nanomotors exhibit increased velocities attributed to their improved photoactivity. As a proof-of-concept, we investigated the ability of these nanomotors to generate phenol, a valuable chemical feedstock, from benzene under combined optical and magnetic fields. Remarkably, the application of an external magnetic field led to a 100% increase in the photocatalytic phenol generation in comparison with light activation alone. By using various state-of-the-art techniques such as photoelectrochemistry, electrochemical impedance spectroscopy, photoluminescence, and electron paramagnetic resonance, we characterized the charge transfer between the semiconductor and the alloy component, revealing that the magnetic field significantly improved charge pair separation and enhanced hydroxyl radical generation. Consequently, our work provides valuable insights into the role of magnetic fields in the mechanisms of light-driven photocatalytic nanomotors for designing more effective light-driven nanodevices for selective oxidations., This research has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (GA no. 101076680; PhotoSwim; and GA no. 866348, i-NanoSwarms). Views and opinions expressed are, however, those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. This publication is also part of the grant PID2022-136886OA-I00 financed by MCIN/AEI/10.13039/501100011033/ FEDER, UE. K.V. acknowledges the support from the Spanish Ministry of Science (MCIN/AEI/10.13039/501100011033) and the European Union (Next generation EU/PRTR) through the Ramón y Cajal grant, RYC2021-031075-I. J.F. (2021-BP-00079) acknowledge the Beatriu de Pinós Programme. IBEC (2021SGR01606). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. ICIQ (CEX2019-000925-S), IBEC (CEX2018-000789-S), and ICN2 (Grant No.: CEX2021-001214-S) are supported by the Severo Ochoa program from Spanish MCIN/AEI and is funded by the CERCA Programme/Generalitat de Catalunya. ICN2 is the founding member of e-DREAM., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000925-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2018-000789-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Boosting the Efficiency of Photoactive Rod-Shaped Nanomotors via Magnetic Field-Induced Charge Separation

  • Ferrer Campos, Rebeca
  • Bakenecker, Anna C.|||0000-0002-9708-3476
  • Chen, Yufen
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Fraire, Juan|||0000-0002-4887-2161
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Sánchez Ordóñez, Samuel|||0000-0001-9713-9997
  • Villa, Katherine|||0000-0003-1917-0299
Photocatalytic nanomotors have attracted a lot of attention because of their unique capacity to simultaneously convert light and chemical energy into mechanical motion with a fast photoresponse. Recent discoveries demonstrate that the integration of optical and magnetic components within a single nanomotor platform offers novel advantages for precise motion control and enhanced photocatalytic performance. Despite these advancements, the impact of magnetic fields on energy transfer dynamics in photocatalytic nanomotors remains unexplored. Here, we introduce dual-responsive rod-like nanomotors, made of a TiO/NiFe heterojunction, able to (i) self-propel upon irradiation, (ii) align with the direction of an external magnetic field, and (iii) exhibit enhanced photocatalytic performance. Consequently, when combining light irradiation with a homogeneous magnetic field, these nanomotors exhibit increased velocities attributed to their improved photoactivity. As a proof-of-concept, we investigated the ability of these nanomotors to generate phenol, a valuable chemical feedstock, from benzene under combined optical and magnetic fields. Remarkably, the application of an external magnetic field led to a 100% increase in the photocatalytic phenol generation in comparison with light activation alone. By using various state-of-the-art techniques such as photoelectrochemistry, electrochemical impedance spectroscopy, photoluminescence, and electron paramagnetic resonance, we characterized the charge transfer between the semiconductor and the alloy component, revealing that the magnetic field significantly improved charge pair separation and enhanced hydroxyl radical generation. Consequently, our work provides valuable insights into the role of magnetic fields in the mechanisms of light-driven photocatalytic nanomotors for designing more effective light-driven nanodevices for selective oxidations.