Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 37
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Sustainable resource optimization for tomato cultivation in a rooftop greenhouse, an 8-year case study

  • Evangelista, Guido|||0000-0002-6516-4933
  • Villalba, Gara|||0000-0001-6392-0902
  • Orsini, Francesco|||0000-0001-6956-7054
  • Muñoz Liesa, Joan|||0000-0001-8442-6399
  • Arcas Pilz, Verónica|||0000-0002-6854-3138
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
Tomato is one of the most popular and consumed crops worldwide and its cultivation via hydroponic techniques is widespread. In this study, we evaluated the performance of an evolving management strategy through an iterative system design over 8 years in an integrated-rooftop greenhouse in Barcelona. Yield, solar radiation, water and nutrient consumption, and environmental impacts through Life Cycle Assessment were analysed. We hypothesized that improving irrigation management, partially substituting mineral fertilizers with recovered nutrients, and ensuring optimal solar radiation would enhance tomato productivity while reducing the environmental impact. The highest productivity was obtained in 2023 (49 g plant−1 day−1), in a cycle using 100 g plant−1 of struvite and in a cycle using mineral fertilization. The replacement of deteriorated polycarbonate sheets in 2023 increased greenhouse solar transmissivity and led to the highest productivity. Life Cycle Assessment impacts were mainly driven by crop yields, growing system characteristics, and energy required to power artificial lighting or nebulization systems, among other inputs. The lowest environmental impacts were obtained in the 2017 cycle (0.54 kg CO2 eq.) followed by the 2023 cycle (0.94 kg CO2 eq.), in which the highest yields were produced thanks to optimal solar transmissivity, dynamic fertigation, and/or struvite. The highest environmental impacts (3.84–12.05 kg CO2 eq.) were achieved in cycles with the lowest productivity (0.9–3.3 kg m−2) and in cycles using artificial lighting in the greenhouse (3.71 kg CO2 eq.) or in an indoor environment (7.07 kg CO2 eq.). Our findings demonstrate that statistically higher yields and environmental sustainability can be achieved by adopting struvite-based fertilization and regularly replacing the greenhouse covering material to ensure maximum light transmissivity. This research provides valuable and novel insights into optimizing tomato cultivation in rooftop greenhouses, achieving constant yields, and reducing the environmental footprints thus contributing to sustainable food production.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Analysis of urban agriculture solid waste in the frame of circular economy: Case study of tomato crop in integrated rooftop greenhouse

  • Manríquez-Altamirano, Ana
  • Sierra-Pérez, Jorge
  • Muñoz, Pere
  • Gabarrell, Xavier
Within urban agriculture (UA), integrated rooftop greenhouses (i-RTG) have great growth potential as they offer multiple benefits. Currently it is intended to improve environmental benefits by taking advantage of the water, nutrients and gases flows. On the other hand, solid waste (SW) generated by the UA is a new type of waste within cities that has not well been classified or quantified for its use. This could become a new problem for the waste management system within cities in the future, mainly the organic fraction. The objective of this research is to identify what type of i-RTG SW has the potential to be used from a circular economy (CE) perspective and propose a type of management for its material valorization. The results of the case study show that, of the SW generated in i-RTG, the biomass has the greatest potential to be used locally as an eco-material, particularly the tomato stems. Its use is proposed as a substrate for two experimental lettuce crops in i-RTG. The results show that tomato stems have a better yield as a substrate after a prewash treatment, since at first the values of electrical conductivity (EC) are very high with respect to the control substrate, which is expanded perlite. In conclusion, we can say that it is possible to increase the environmental benefits of i-RTG by taking advantage of its biomass locally, helping to foresee a possible future problem regarding the management of the residual biomass of i-RTG within cities. In this way, the paradigm about the perception of the SW of the UA could be changed to give them a by-product treatment from the beginning.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Identifying potential applications for residual biomass from urban agriculture through eco-ideation: Tomato stems from rooftop greenhouses

  • Manríquez-Altamirano, A.
  • Sierra-Pérez, J.
  • Muñoz, P.
  • Gabarrell, X.
Considering that urban agriculture (UA) is currently on the rise due to its multiple benefits in addition to environmental ones, it would also be necessary to foresee the flow of solid waste it generates, which if not properly managed or used, could become a new waste problem within the cities. The main objective of this study is to take advantage of agro-urban solid waste (AUSW) from the perspective of Circular economy (CE) in order to, in addition to reducing the volume of AUSW within cities, to close the life cycle of UA allowing to continue with its multiple benefits. Starting from a previous study on the classification and quantification of the AUSW generated in rooftop greenhouse (RTG) tomato crop, where it was determined that the waste with the greatest potential for use was tomato stems, in this study a methodology is proposed that part of the eco-design to take advantage of the tomato stems adding value (upcycling) through the approach of “do-it-yourself” (DIY) for local use. First, the physical, chemical and mechanical characterization of the tomato stems was carried out and the materials with similar properties were identified using Ashby graphs. Afterwards, a creative session was held where specialists in order to identify possible applications of the stems through group techniques for the generation of ideas and the evaluation of concepts. Finally, tests were carried out with the material and a semi-quantitative evaluation of the resulting concepts was carried out using an eco-design metric. The resulting concepts were “Fences and trellises”, “Packaging” and “Boards, panels and blocks". In addition to the results obtained on the possible applications of the stems in situ, this study provides data on the characterization of the stems of tomato plants that could also be used for the use of biomass in other contexts and scales such as conventional agriculture.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Building-integrated agriculture: are we shifting environmental impacts? An environmental assessment and structural improvement of urban greenhouses

  • Muñoz Liesa, Joan
  • Toboso, Susana
  • Mendoza Beltran, Angélica
  • Cuerva Contreras, Eva
  • Gallo, Esteban
  • Gassó Domingo, Santiago
  • Josa Garcia-Tornel, Alejandro
Urban and building systems are awash with materials. The incorporation of green infrastructure such as integrated rooftop greenhouses (iRTGs) has the potential to contribute to buildings’ and cities’ circularity. However, its greater sophistication than conventional agriculture (CA) could lead to a shift in environmental impacts. One of the key elements for greenhouse building-integrated agriculture (BIA) and CA to achieve high levels of environmental performance is their structural design, which largely impacts the economic and environmental life-cycle costs (by up to 63%). In this context, the study assessed iRTGs life-cycle material and energy flows and their environmental burdens at structural level (m-2y-1) within life cycle assessment (LCA), based on a case study in Barcelona. A structural assessment following European standards allowed the identification of key design factors to minimize the environmental impacts of RTGs’ structure within improvement scenarios. The assessment revealed that a steel structure in a business-as-usual (BAU) scenario contributed from 31.5 to 67.3% of the impact categories analyzed, followed by the polycarbonate covering material (from 21.8 to 45.9%). The key design factors responsible for these environmental impacts were ground height, ventilation design, building integration and urban location. The improvement scenarios compensated for additional steel inputs by up to 35.9% and decreased environmental impacts that might occur in the BIA context by 24.1% compared with the BAU scenario. The assessment also revealed that urban environments do not imply shifting environmental impacts per se, as greenhouse BIA structures can benefit from their advantageous characteristics or be compensated by optimized greenhouse structures., The authors are grateful to the Secretaria d'Universitats i Recerca del Departament d'Economia i Coneixement de la Generalitat de Catalunya for the award of a research scholarship (FI-DGR 2018) to Joan Muñoz-Liesa; to the Spanish Ministry of Education, Culture and Sports grant FPU16/03238 to Susana Toboso-Chavero; and to the European Union's Horizon2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 842460 to Angelica Mendoza Beltran. Authors also acknowledge financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) for the financial support to the research project Fertilectiy II “Integrated rooftop greenhouses: energy, waste and CO2 symbiosis with the building. Towards foods security in a circular economy” (CTM2016–75772-C3–1-R; CTM2016–75772-C3–2-R) and the Spanish Ministry of Science, Innovation and Universities, through the “María de Maeztu” program for Units of Excellence (MDM-2015–0552). Authors would also gratitude Dr. Violeta Vargas, Dr. Xavier Gabarrell, Dr. Joan Rieradevall, Dr. Martí Rufí-Salís, Dr. Gara Villalba and the ICTA-UAB staff for the very valuable support advise and help., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Laboratory-based spectral data acquisition of roof materials

  • Zambrano Prado, Perla
  • Josa Garcia-Tornel, Alejandro
  • Rieradevall Pons, Joan
  • Pérez Aragüés, Fernando
  • Marchán Hernández, Juan Fernando
  • Gassó Domingo, Santiago
  • Gabarrell Durany, Xavier
Roof characteristics such as material type and their properties information are essential to integrating urban agriculture (UA), rainwater harvesting systems (RWHS), and energy systems on roofs. Roof materials can be identified from their spectral signatures. However, this identification requires a priori knowledge of the materials’ spectral characteristics. The main perspective of this work is the future use of spectral data for roof classification. A common practice in mapping materials is the use of spectral libraries. In this regard, this work describes a novel framework for laboratory-based spectral data acquisition. The reflectance data of common, recently introduced (plastics and metals), and representative roof materials from the Mediterranean region were obtained. Data acquisition was conducted in a laboratory under controlled conditions using a high-spatial-resolution (HSR) sensor, which is usually used for airborne surveys. Large variations in the spectral reflectance data were observed due to the composition of the roof material. Flat spectral signatures were found for fibre cement, concrete, gravels and some metals, especially from the near-infrared (NIR) spectral region. Colour and surface finish greatly influence the visible (VIS) spectral range. It was confirmed that the view angle did not modify the spectral shapes. A collection of 39 spectral data of roof materials (ceramics, concrete, fibre cement, metals, plastics, paints, stone, and wood) were compiled into a spectral library that is available online., This work is part of the Fertilecity II project supported by the Spanish Ministry of Economy and Competitiveness (CTM2016-75772-C3-3-R and CTM2016-75772-C3-1-R, AEI/FEDER, UE); from the Spanish Ministry of Science, Innovation and Universities; through the María de Maeztu program for Units of Excellence (MDM-2015-0552). Authors want to thank to the University of Guadalajara (Mexico) for awarding a research scholarship to Perla Zambrano-Prado, and to the reviewers for their valuable comments., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Improving urban metabolism: bi-directional energy and environmental benefits of rooftop greenhouse and building integration

  • Muñoz Liesa, Joan
  • Royapoor, Mohammad
  • López Capel, Elisa
  • Cuerva Contreras, Eva
  • Gassó Domingo, Santiago
  • Josa Garcia-Tornel, Alejandro
Rapid global urbanisation in 21st century results in cities consuming vast resources but also offering unique opportunities for more integrated and circular resource management. This work investigates potential benefits of urban agriculture and buildings integration through a demonstrator building (ICTA). Actual building and integrated Rooftop Greenhouse (iRTG) data demonstrate wide thermal profiles across ICTA six levels and the potential for heat exchange within the building. Calibrated model monthly results indicate reduced building heating needs resulting from iRTG inclusion. However, more modest GSHP electrical cooling reductions resulting from plant transpiration showed reversing potential which requires more in-depth analysis of underlying principles., The authors are grateful to the Secretaria d'Universitats i Recerca del Departament d'Economia i Coneixement de la Generalitat de Catalunya for the award of a research scholarship (FI-DGR 2016) to Joan Muñoz Liesa; the Spanish Ministry of Economy and Competitiveness (MINECO) for the financial support of the research project Fertilectiy II “Integrated rooftop greenhouses: energy, waste and CO2 symbiosis with the building. Towards foods security in a circular economy” (CTM2016-75772-C3-1-R; CTM2016-75772-C3-2-R) and the María de Maeztu program for Units of Excellence in R&D (MDM-2015-0552)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Applying nutrient dynamics to adjust the nutrient-water balance in hydroponic crops. A case study with open hydroponic tomato crops from Barcelona

  • Sanjuan Delmás, David
  • Josa Garcia-Tornel, Alejandro
  • Muñoz Odina, Pedro
  • Gassó Domingo, Santiago
  • Rieradevall Pons, Joan
  • Gabarrell Durany, Xavier
Background:Global food production systems generate impacts such as eutrophication, caused by nutrient run-offfrom agricultural exploitations and exacerbated by climate change. Hydroponic cultivation methods arecommon in Mediterranean areas, although there is a gap in the literature with regard to their study. This studyaims tofill that gap, by assessing nutrientflows in hydroponic crops.Results:The results showed that most of the nutrients were drained with the leachates (51% on average), afigurewhich could be lower, if the nutrient supply were adjusted to the needs of the plants or if (closed hydroponic)nutrient recirculation were implemented, without compromising the nutrient uptake of the plant. Moreover, thestudy revealed that a significant quantity of nutrients was retained in the substrate (perlite) during the crop,reaching average values of 5% of incoming calcium, 6% of nitrogen, and 7% of phosphorus. In the case ofphosphorus and calcium, a regression model is presented for the estimation of their retention in hydroponiccrops.Conclusions:Although further studies will be needed to confirm the above trends, the study makes a significantcontribution to understanding the metabolism of nutrients in hydroponic crops and tofiner adjustments of thenutrient balance., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Bottom-up model for the sustainability assessment of rooftop-farming technologies potential in schools in Quito, Ecuador

  • Ledesma Hidalgo, Maria Gabriela
  • Nikolic, Jelena
  • Pons Valladares, Oriol
Rooftop-farming technologies can transform unexploited roofs into agricultural areas; and though studies have quantified the sustainability of diverse rooftop-farm systems, researchers lack a direct comparison between these farms using a unified sustainability index. Therefore the proposed bottom-up model aims to quantify the sustainability of rooftop-farm technologies application in school building stocks, thus permitting an objective comparison and ultimately selection of the best-fitted farm system. This model handles large building samples by combining Statistical Mining Techniques with the Integrated Value Model for Sustainability Assessment. It uses data on the economic, environmental and social aspects of the farms, and relates them to the technical limitations and functionality found in the host buildings. The model has three consecutive stages: 1) in the City Stage reference buildings are identified from the stock, 2) the Building Information Stage determines the logistics and infrastructure requirements; and, 3) the Farm Technology Stage quantifies the farms’ sustainability. This model was used to assess the potential implementation of three rooftop-farms (edible-green roofs, rooftop greenhouses and integrated rooftop greenhouses) in the primary school stock in Quito, Ecuador. Two reference buildings represented the primary school stock of the city; and, in both typologies, edible-green roofs obtained the highest sustainability values of 0.62 and 0.65. The environmental pillar was the most discriminant in which green-roofs achieved twice the sustainability values for the rooftop-greenhouses due to their larger rainwater harvesting capacity, thermal resistance and contribution to the increment of urban greenspaces., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Identifying eco-efficient year-round crop combinations for rooftop greenhouse agriculture

  • Rufí-Salís, Martí
  • Petit Boix, Anna
  • Villalba Mendez, Gara
  • Ercilla Montserrat, Mireia
  • Sanjuan Delmás, David
  • Parada, Felipe
  • Arcas, Verónica
  • Muñoz Liesa, Joan
  • Gabarrell, Xavier
Purpose: Rooftop greenhouses (RTGs) are agricultural systems that can improve the food supply chain by producing vegetables in unused urban spaces. However, to date, environmental assessments of RTGs have only focused on specific crops, without considering the impacts resulting from seasonality, combinations of crops and nonoperational time. We analyze vegetable production in an RTG over 4 years to determine the crop combinations that minimize yearly environmental impacts while diversifying food supply. Methods: The system under study consists of an integrated RTG (i-RTG) with a hydroponic system in Barcelona, in the Mediterranean region. By using life cycle assessment (LCA), we evaluate the environmental performance of 25 different crop cycles and 7 species cultivated during the period 2015–2018. Three functional units are used: 1 kg of edible fresh production, 1 unit of economic value (€) in the wholesale market and 1 kcal of nutritional value. The system boundaries consider two subsystems: infrastructure (greenhouse structure, rainwater harvesting system and auxiliary equipment) and operation (fertilizers and their emissions into water and substrate). In addition, we perform an eco-efficiency analysis, considering the carbon footprint of the crop cycles and their value at the wholesale market during their harvesting periods. Results and discussion: Spring tomato cycles exert the lowest impacts in all categories, considering all three functional units, due to the high yields obtained. In contrast, spinach and arugula have the highest impacts. Regarding relative impact, the greenhouse structure presented a large impact, while fertilizer production had notable relative contributions in tomato cycles. Moreover, nitrogen and phosphorus emissions from fertigation are the main causes of freshwater and marine eutrophication. By combining the most eco-efficient cycles, we can see that growing two consecutive tomato cycles is the best alternative with the functional unit of yield (0.49 kg CO2 eq./kg), whereas a long spring tomato cycle combined with bean and lettuce cycles in the autumn/ winter is the best scenario when using market (0.70 kg CO2 eq./€) and nutritional value (3.18·10-3 kg CO2/ kcal). Conclusions: This study shows that increasing the diversity of the system leads to better environmental performance of green- house urban agriculture if suitable crops are selected for the autumn/winter season. The functional unit involving the economic value and the eco-efficiency analysis are useful to demonstrate the capability of the growing system to produce added-value vegetables under harsher conditions while categorizing and classifying the crops to select the most suitable combinations based on economic and environmental parameters., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mapping roof materials in cities for food, water, and energy production: a Mediterranean metropolitan area case study

  • Zambrano Pardo, Perla
  • Josa Garcia-Tornel, Alejandro
  • Rieradevall Pons, Joan
  • Alamús, Ramón
  • Pérez Aragüés, Fernando
  • Marchan Hernández, Juan Fernando
  • Gassó Domingo, Santiago
  • Gabarrell Durany, Xavier
In recent years, rooftops have been used as productive spaces for local resource (e.g. food, water, or energy) production. The main objective of this study is to demonstrate the potential of hyperspectral data to identify roof materials in cities. The case study area is located in a Mediterranean region north of Barcelona (Spain); diverse building typologies, building uses (residential, industrial, office, services and retail) and population densities constitute this study area. Two hyperspectral remote sensors (HRSs) were used to obtain hyperspectral images. Seven roof classes were identified using the k-means clustering algorithm. Most roofs were identified as metals (33 percent), followed by ceramic tiles (22 percent). The findings showed that 51 percent of roofs could be suitable for food, water, or energy production. Nevertheless, for a more reliable assessment of this potential, more criteria are needed., This work is part of the Fertilecity II project supported by the Spanish Ministry of Economy and Competitiveness (CTM2016-75772-C3-3-R and CTM2016-75772-C3-1-R, AEI/FEDER, UE); from the Spanish Ministry of Science, Innovation and Universities; through the María de Maeztu program for Units of Excellence (CEX2019-000940-M) and supported by MOVE4EDU. Authors want to thank to the University of Guadalajara (Mexico) for awarding a research scholarship to Perla Zambrano-Prado, and to the reviewers for their valuable comments., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The quality of urban air in Barcelona: a new approach applying compositional data analysis methods

  • Gibergans Bàguena, José
  • Hervada Sala, Carme
  • Jarauta Bragulat, Eusebio
The main goal of this paper is to go some steps further to improve the understanding and manageability of air quality. Quality of atmospheric air in large cities is a matter of great importance because of its impact on the environment and on the health of the population. Recently, measures restricting access of private vehicles to the centre of large cities and other measures to prevent atmospheric air pollution are currently topical. The knowledge of air quality acquires special relevance to be able to evaluate the impact of those great social and economic measures. There are many indices to express air quality. In fact, quite every country has its own, depending on the main pollutants. In general, all indices ignore the compositional nature of the concentrations of air pollutants and do not apply methods of Compositional Data Analysis and have some other weak points such as leak of standardized scale. Therefore, the methodology used is founded on Compositional Data Analysis. The air quality index has an adequate correlation between input (concentrations) and output (air quality index), it distinguishes between air pollution and air quality and it has a 0-100 reference scale which makes easier interpretation and management of air quality expression. To illustrate the proposed method, an application is made to a series of air pollution data (Barcelona, 2001-2015). The results show the effectiveness of the 2008 European directive on ambient air quality, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Quantifying energy symbiosis of building-integrated agriculture in a mediterranean rooftop greenhouse

  • Muñoz Liesa, Joan
  • Royapoor, Mohammad
  • López Capel, Elisa
  • Cuerva Contreras, Eva
  • Rufí-Salís, Martí
  • Gassó Domingo, Santiago
  • Josa Garcia-Tornel, Alejandro
A major concern for sustainable development is urban systems energy consumption. A possible way to gain additional whole system energy efficiencies is to integrate rooftop greenhouses (iRTG) on unoccupied roofs. This work presents actual environmental data (2015–2018) and calibrated energy modelling results to analyze the energy symbiosis between an iRTG and the host building. Simulation results illustrate that annually 98 kWh/m2 of heating energy is passively recovered (84% during night time) from the building by the iRTG. Conversely the iRTG insulating capacity resulted in annual energy saving of 35 kWh/m2 for the host building (equal to 4% of the building’s annual energy needs). When combined an overall 128 kWh/m2 of net energy savings and 45.6 kg CO2 eq/m2 of savings are realised via iRTG. On average, iRTG daytime temperatures can be 5.1 °C warmer (summer) and -4.3 °C cooler (winter) than the building. This presents major potentials for recovery and exchange of heating and cooling energy flows through integrating heating and ventilation air conditioning systems of the building and iRTG. Hence, iRTGs can provide a source of renewable energy as well as a sink for building exhaust air to improve energy efficiencies of urban built environment and urban agriculture., The authors are grateful to the Secretaria d’Universitats i Recerca del Departament d’Economia i Coneixement de la Generalitat de Catalunya for the award of a research scholarship (FI-DGR 2018) to Joan Muñoz-Liesa; to the Universitat Autònoma de Barcelona for the award of a research scholarship (PIF-2017) to Martí Rufí-Salís; to the Spanish Ministry of Economy and Competitiveness (MINECO) for the financial support to the research project Fertilectiy II “Integrated rooftop greenhouses: energy, waste and CO2 symbiosis with the building. Towards foods security in a circular economy” (CTM2016-75772-C3-1-R; CTM2016-75772-C3-2-R). Authors also acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities, through the “María de Maeztu” program for Units of Excellence (MDM-2015-0552). This work was additionally enabled by the Càtedra JG Ingenieros – Universitat Politècnica de Catalunya and the UK Engineering and Physical Sciences Research Council grand EP/P001173/1. Authors also thank Oriol Baeza, Prof. Xavier Gabarrell, Prof. Joan Rieradevall and the ICTA-UAB staff for their very valuable supporting advise and help., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessment of the food-water-energy nexus suitability of rooftops: a methodological remote sensing approach in an urban Mediterranean area

  • Zambrano, Perla
  • Muñoz Liesa, Joan
  • Josa Garcia-Tornel, Alejandro
  • Rieradevall Pons, Joan
  • Alamús, Ramón
  • Gassó Domingo, Santiago
  • Gabarrell Durany, Xavier
This work established a framework to identify and analyze the technical feasibility of roofs for integrating urban agriculture, rainwater harvesting, and photovoltaic systems using various remote sensing. The framework was applied to a region north of Barcelona. Three levels of solar access requirements for tomatoes, leafy crops, strawberries, and microgreens were established. The case study included compact and disperse urban forms, residential and nonresidential building uses and various building typologies. It was identified that 8% of the roof area is feasible for tomato and lettuce production, and production could satisfy the 210% of average intake of tomatoes and the 21% average yearly consumption of lettuce. Rainwater harvesting systems could supply 94.26% of the water requirements for lettuce growing in an open-air system; in contrast, 53% of irrigation could be satisfied for tomato production in rooftop greenhouse systems. The results showed a potential for 80% of roof area to be used for rainwater harvesting systems, representing the average yearly water consumption of 44% of citizens for laundry, showering, toilet flushing, cleaning and irrigation uses. Finally, 50% of the roofs are suitable for photovoltaic panels, representing an average energy consumption of 18% of citizens., This work is part of the Fertilecity II project supported by the Spanish Ministry of Economy and Competitiveness (CTM2016-75772-C3-3-R and CTM2016-75772-C3-1-R, AEI/FEDER, UE); from the Spanish Ministry of Science, Innovation and Universities. This research has received financial support from the European Union's Horizon 2020 research and innovation program under grant agreement No 862663. The publication reflects the author's views. The Research Executive Agency (REA) is not liable for any use that may be made of the information contained therein. This work was supported by the “María de Maeztu” program for Units of Excellence in R&D (CEX2019-000940-M). Authors want to thank to Assumpció Termes and Fernando Pérez-Aragüés from the Institut Cartogràfic i Geològic de Catalunya for their valuable support, to the Greenhouses to reduce CO2 on Roofs (GROOF) project, to the reviewers and editor for their observations, also to the Secretaria d'Universitats i Recerca del Departament d'Economia i Coneixement de la Generalitat de Catalunya for the award of a research scholarship (FI-DGR 2018) to Joan Muñoz-Liesa and to the University of Guadalajara (Mexico) for awarding a research scholarship to Perla Zambrano-Prado., Peer Reviewed, Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

N2O emissions from protected soilless crops for more precise food and urban agriculture life cycle assessments

  • Llorach-Massana, Pere|||0000-0003-1162-8162
  • Muñoz Odina, Pere|||0000-0002-2931-6311
  • Riera Riera, M. Rosa
  • Rieradevall, Joan|||0000-0003-3360-6829
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
  • Montero Camacho, Juan Ignacio|||0000-0003-2548-4665
  • Villalba, Gara|||0000-0001-6392-0902
Due to population growth and the subsequent increase in the demand for food, low carbon food chain production systems are a necessity to reduce the effects on climate change as much as possible. Urban agriculture is of great interest because of its potential in reducing the indirect CO2 emissions of a city's food supply by reducing transportation distances, the packaging required and the food losses that occur during transportation. However, intensive urban agriculture production, which often relies on the use of soilless substrates, requires synthetic fertilizers rich in nitrogen, resulting in N2O emissions. Presently, there is a lack of studies that determine the generation of N2O from soilless crops to properly account for their global warming potential. In this study, an open chamber system was used to quantify N2O emissions from lettuce crops with perlite bags as their substrate in a Mediterranean rooftop greenhouse located in the metropolitan area of Barcelona (Spain). N2O generation, through nitrifying and denitrifying reactions, was limited by assuring an aerobic environment, negligible water retention, the absence of NH3, and controlled dosage of NO3- in the most favorable pH conditions for plant assimilation. The emission factor (EF) measured for the soilless lettuce crop (0.0072-0.0085 kg N2O-1 per kg N-1) was half the EF of the IPCC method (0.0125 kg N2O-1 per kg N-1) for soil crops, which is commonly used in life cycle assessment (LCA) studies to approximate direct N2O emissions, for lack of a better method. Using a more appropriate EF for an LCA study of a tomato crop grown under similar conditions to those used to generate the EF resulted in a 7.5% reduction (0.06 kg CO2 eq. per kilogram of tomato production) in total global warming potential. This study shows that soilless crops reduce N2O emissions when compared to conventional crops, making urban agriculture an attractive practice for reducing GHG emissions. The results highlight the need to determine a standard method for determining an EF applicable to soilless protected crops, which, based on the parameters described here, such as the type of substrate, fertilizers and irrigation system, would allow for a more accurate environmental evaluation of soilless conventional and urban crops.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Building-integrated agriculture, a first assessment of aerobiological air quality in rooftop greenhouses (i-RTGs)

  • Ercilla Montserrat, Mireia|||0000-0002-6632-7829
  • Izquierdo Miguel, Rebeca|||0000-0001-5780-4462
  • Belmonte, Jordina|||0000-0002-6419-9595
  • Montero Camacho, Juan Ignacio|||0000-0003-2548-4665
  • Muñoz Odina, Pere|||0000-0002-2931-6311
  • De Linares Fernández, Concepción|||0000-0002-2047-3337
  • Rieradevall, Joan|||0000-0003-3360-6829
Building-integrated rooftop greenhouse (i-RTG) agriculture has intensified in recent years, due to the growing interest in the development of new agricultural spaces and in the promotion of food self-sufficiency in urban areas. This paper provides a first assessment of the indoor dynamics of bioaerosols in an i-RTG, with the aim of evaluating biological air quality in a tomato greenhouse near Barcelona. It evaluates the greenhouse workers' exposure to airborne pollen and fungal spores in order to prevent allergy problems associated with occupational tasks. Moreover, it evaluates whether the quality of the hot air accumulated in the i-RTG is adequate for recirculation to heat the building. Daily airborne pollen and fungal spore concentrations were measured simultaneously in the indoor and outdoor environments during the warm season. A total of 4,924 pollen grains/m3 were observed in the i-RTG, with a peak of 334 pollen grains/m3day, and a total of 295,038 fungal spores were observed, reaching a maximum concentration of 26,185 spores/m3day. In general, the results showed that the most important source of pollen grains and fungal spores observed indoors was the outdoor environment. However, Solanaceae pollen and several fungal spore taxa, such as the allergenic Aspergillus/Penicillium, largely originated inside the greenhouses or were able to colonize the indoor environment under favourable growing conditions. Specific meteorological conditions and agricultural management tasks are related to the highest observed indoor concentrations of pollen grains and fungal spores. Therefore, preventive measures have been suggested in order to reduce or control the levels of bioaerosols indoors (to install a system to interrupt the recirculation of air to the building during critical periods or to implement appropriate air filters in ventilation air ducts). This first evaluation could help in making decisions to prevent the development of fungal diseases, specifically those due to Oidium and Torula.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A study on air quality and heavy metals content of urban food produced in a Mediterranean city (Barcelona)

  • Ercilla Montserrat, Mireia|||0000-0002-6632-7829
  • Muñoz Odina, Pere|||0000-0002-2931-6311
  • Montero Camacho, Juan Ignacio|||0000-0003-2548-4665
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
  • Rieradevall, Joan|||0000-0003-3360-6829
Urban agriculture is growing in cities and is rising to the roofs of buildings. The potential food contamination is a key issue to be resolved to guarantee the health of consumers, and it affects both urban agriculture promoters and consumers. Crop contamination from the soil can be overcome by adopting a soilless cultivation system that, with good management practices, can also avoid contamination from the fertirrigation system and pest treatments. It has recently increased the number of soilless cultivation systems in cities due to the good features it offers. This study focuses on the potential contamination of heavy metals in hydroponic lettuce crops due to atmospheric pollution in high-traffic areas. The contents of heavy metal in the air and the lettuce leaves were measured at 4 sites: a periurban-integrated rooftop greenhouse, a periurban rooftop, an urban courtyard and an urban rooftop. High-volume sensors were used to assess air contamination. Lettuce leaves were analysed to evaluate the heavy metal concentrations. The results show that the heavy metal concentration in lettuce leaves is also below the EU-legislated limit in all studied cases. Specifically, the concentrations below the detectable analytic values were <0.02 mgNi/kg, <0.008 mgHg/kg, 0.005mgAs/kg and <0.005 mgCd/kg. The Pb concentration ranged from 0.0060 mg/kg to 0.0244 mg/kg. Although the chosen sampling locations were close to high-density roads and they are more vulnerable to a high concentration of metals, in the 4 sampling points heavy metal concentration in the air were less than 50% of the limits established in the legislation as the lower assessment threshold. This study concludes that the heavy metal content in the air of Barcelona is low and is not a source of contamination for urban crops including high traffic areas.
Dipòsit Digital de Documents de la UAB
Datos de investigación Set de datos (Dataset)

Spectral Library of Rooftop Urban Materials

  • Zambrano Prado, Perla|||0000-0001-5911-3585
  • Josa Garcia-Tornel, Alejandro|||0000-0003-1180-7910
  • Rieradevall, Joan|||0000-0003-3360-6829
  • Gassó Domingo, Santiago|||0000-0003-0481-4522
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
The Spectral Library of Rooftop Urban Materials (SLyRUM) is divided into 6 sections according to material classes, including different types of ceramics, metals, plastics, roofing tile, rocks, concrete, and wood. This library was developed with the aim to support the knowledge of spectral characteristics of rooftop materials from the Mediterranean region. The SLyRUM has been developed by the Universitat Politècnica de Catalunya and Sostenipra Research Group.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ecological network analysis of growing tomatoes in an urban rooftop greenhouse

  • Piezer, Kayla
  • Petit-Boix, Anna|||0000-0003-2048-2708
  • Sanjuan Delmas, David|||0000-0002-5238-2069
  • Briese, Emily
  • Celik, Ilke
  • Rieradevall, Joan|||0000-0003-3360-6829
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
  • Josa Garcia-Tornel, Alejandro|||0000-0003-1180-7910
  • Apul, Defne
Urban agriculture has emerged as an alternative to conventional rural agriculture seeking to foster a sustainable circular economy in cities. When considering the feasibility of urban agriculture and planning for the future of food production and energy, it is important to understand the relationships between energy flows throughout the system, identify their strengths and weaknesses, and make suggestions to optimize the system. To address this need, we analyzed the energy flows for growing tomatoes at a rooftop greenhouse (RTG). We used life cycle assessment (LCA) to identify the flows within the supply chain. We further analyzed these flows using ecological network analysis (ENA), which allowed a comparison of the industrial system to natural systems. Going beyond LCA, ENA also allowed us to focus more on the relationships between components. Similar to existing ENA studies on urban metabolism, our results showed that the RTG does not mimic the perfect pyramidal structure found in natural ecosystems due to the system's dependency on fossil fuels throughout the supply chain and each industry's significant impact on wasted energy. However, it was discovered that the RTG has strong foundational relationships in its industries, demonstrating overall positive utility; this foundation can be improved by using more renewable energy and increasing the recycling rates throughout the supply chain, which will in turn improve the hierarchy of energy flows and overall energy consumption performance of the system.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Towards productive cities, environmental assessment of the food-energy-water nexus of the urban roof mosaic

  • Toboso-Chavero, Susana|||0000-0001-8475-5184
  • Nadal, Ana|||0000-0002-9919-5092
  • Petit-Boix, Anna|||0000-0003-2048-2708
  • Pons Valladares, Oriol|||0000-0003-1747-8150
  • Villalba, Gara|||0000-0001-6392-0902
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
  • Josa Garcia-Tornel, Alejandro|||0000-0003-1180-7910
  • Rieradevall, Joan|||0000-0003-3360-6829
Cities are rapidly growing and need to look for ways to optimize resource consumption. Metropolises are especially vulnerable in three main systems, often referred to as the FEW (i.e., food, energy, and water) nexus. In this context, urban rooftops are underutilized areas that might be used for the production of these resources. We developed the Roof Mosaic approach, which combines life cycle assessment with two rooftop guidelines, to analyze the technical feasibility and environmental implications of producing food and energy, and harvesting rainwater on rooftops through different combinations at different scales. To illustrate, we apply the Roof Mosaic approach to a densely populated neighborhood in a Mediterranean city. The building-scale results show that integrating rainwater harvesting and food production would avoid relatively insignificant emissions (13.9-18.6 kg CO₂ eq/inhabitant/year) in the use stage, but their construction would have low environmental impacts. In contrast, the application of energy systems (photovoltaic or solar thermal systems) combined with rainwater harvesting could potentially avoid higher CO₂ eq emissions (177-196 kg CO₂ eq/inhabitant/year) but generate higher environmental burdens in the construction phase. When applied at the neighborhood scale, the approach can be optimized to meet between 7% and 50% of FEW demands and avoid up to 157 tons CO₂ eq/year. This approach is a useful guide to optimize the FEW nexus providing a range of options for the exploitation of rooftops at the local scale, which can aid cities in becoming self-sufficient, optimizing resources, and reducing CO2 eq emissions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Agronomic and Environmental Assessment of a Polyculture Rooftop Soilless Urban Home Garden in a Mediterranean City

  • Boneta, Anna
  • Rufí Salís, Martí|||0000-0003-3696-1033
  • Ercilla Montserrat, Mireia|||0000-0002-6632-7829
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
  • Rieradevall, Joan|||0000-0003-3360-6829
Urban planning has been focusing its attention on urban rooftop agriculture as an innovative way to produce local and reliable food in unused spaces in cities. However, there is a lack of quantitative data on soilless urban home gardens and their contribution to self-sufficiency. The aim of the present study is to provide quantitative agronomic and environmental data on an actual soilless urban garden to estimate its degree of self-sufficiency and sustainability. For this purpose, an 18 m2 soilless polyculture rooftop urban home garden in the city center of Barcelona was analyzed. From 2015 to 2017, 22 different crops were grown to feed 2 people in an open-air soilless system, and a life cycle assessment was performed. A total productivity of 10.6 kg/m2/year was achieved, meaning that 5.3 m2 would be needed to fulfill the yearly vegetable requirements of an average citizen (in terms of weight). Considering the vegetable market basket of Catalonia, an 8.2 m2 soilless garden would be needed to cover 62% of the market basket for one person. The top 5 most productive crops were tomato, chard, lettuce, pepper and eggplant, accounting for 85.5% of the total production. The water consumption was 3.7 L/m2/day, and 3.3 kg/year/m2 of waste was generated. A high degree of self-sufficiency was achieved, although adjustments could be made to adapt the production to the market basket. The environmental assessment showed that the fertilizers and their associated leachates accounted for the highest environmental impacts in all the studied impact categories. Overall, 0.6 kg CO2 eq. was generated per kg of vegetables produced. The quantitative data provided by the present study offer a reference from which urban planners and researchers can project future implementations of rooftop urban agriculture (UA) on a large scale.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Analysis of the consumer's perception of urban food products from a soilless system in rooftop greenhouses, a case study from the Mediterranean area of Barcelona (Spain)

  • Ercilla Montserrat, Mireia|||0000-0002-6632-7829
  • Sanjuan Delmas, David|||0000-0002-5238-2069
  • Sanyé Mengual, Esther|||0000-0002-2349-9807
  • Calvet-Mir, Laura|||0000-0002-7022-6342
  • Banderas, Karla
  • Rieradevall, Joan|||0000-0003-3360-6829
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
Soilless crops are commonly used in rooftop agriculture (RA) because they easily adapt to building constraints. However, acceptance of the produce derived from this system may be controversial. This paper evaluates consumers' acceptance of food from RA in Mediterranean cities, focusing on the quality of the product, production system, and consumers' motivations. We surveyed 238 respondents on the UAB university campus as potential consumers. The survey was distributed via an Internet-link that was provided along with a sample of tomatoes from RA. The results showed that most people approved the quality of RA products and perceived them to be local and fresh (94%). The respondents exhibited acceptance of soilless-produced tomatoes and considered them to be environmentally better than conventionally produced ones (69%). Cluster analysis revealed that consumers with high income levels and a university education had a better perception of the quality and proposed a higher price for RA products, but no difference was found regarding their environmental perception of this products. Moreover, people who possessed more information about the product also had a higher perception of the quality and production system (it was perceived to be environmentally friendly) and would pay more for them. The main concerns of consumers were related to food safety and the social impact of RA. Additional research is needed to improve the sustainability of RA, and the applied measures should be communicated to potential consumers to enhance their acceptance and success.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Identifying eco-efficient year-round crop combinations for rooftop greenhouse agriculture

  • Rufí Salís, Martí|||0000-0003-3696-1033
  • Petit-Boix, Anna|||0000-0003-2048-2708
  • Villalba, Gara|||0000-0001-6392-0902
  • Ercilla Montserrat, Mireia|||0000-0002-6632-7829
  • Sanjuan Delmas, David|||0000-0002-5238-2069
  • Parada, Felipe|||0000-0003-2845-236X
  • Arcas Pilz, Verónica|||0000-0002-6854-3138
  • Muñoz Liesa, Joan|||0000-0001-8442-6399
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
Purpose: Rooftop greenhouses (RTGs) are agricultural systems that can improve the food supply chain by producing vegetables in unused urban spaces. However, to date, environmental assessments of RTGs have only focused on specific crops, without considering the impacts resulting from seasonality, combinations of crops and nonoperational time. We analyze vegetable production in an RTG over 4 years to determine the crop combinations that minimize yearly environmental impacts while diversifying food supply. Methods: The system under study consists of an integrated RTG (i-RTG) with a hydroponic system in Barcelona, in the Mediterranean region. By using life cycle assessment (LCA), we evaluate the environmental performance of 25 different crop cycles and 7 species cultivated during the period 2015-2018. Three functional units are used: 1 kg of edible fresh production, 1 unit of economic value (€) in the wholesale market and 1 kcal of nutritional value. The system boundaries consider two subsystems: infrastructure (greenhouse structure, rainwater harvesting system and auxiliary equipment) and operation (fertilizers and their emissions into water and substrate). In addition, we perform an eco-efficiency analysis, considering the carbon footprint of the crop cycles and their value at the wholesale market during their harvesting periods. Results and discussion: Spring tomato cycles exert the lowest impacts in all categories, considering all three functional units, due to the high yields obtained. In contrast, spinach and arugula have the highest impacts. Regarding relative impact, the greenhouse structure presented a large impact, while fertilizer production had notable relative contributions in tomato cycles. Moreover, nitrogen and phosphorus emissions from fertigation are the main causes of freshwater and marine eutrophication. By combining the most eco-efficient cycles, we can see that growing two consecutive tomato cycles is the best alternative with the functional unit of yield (0.49 kg CO2 eq./kg), whereas a long spring tomato cycle combined with bean and lettuce cycles in the autumn/winter is the best scenario when using market (0.70 kg CO2 eq./€) and nutritional value (3.18·10-3 kg CO2/ kcal). Conclusions: This study shows that increasing the diversity of the system leads to better environmental performance of greenhouse urban agriculture if suitable crops are selected for the autumn/winter season. The functional unit involving the economic value and the eco-efficiency analysis are useful to demonstrate the capability of the growing system to produce added-value vegetables under harsher conditions while categorizing and classifying the crops to select the most suitable combinations based on economic and environmental parameters.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Feasibility assessment of rooftop greenhouses in Latin America. The case study of a social neighborhood in Quito, Ecuador

  • Nadal, Ana|||0000-0002-9919-5092
  • Rodríguez-Cadena, Daniel
  • Pons Valladares, Oriol|||0000-0003-1747-8150
  • Cuerva, Eva|||0000-0003-2016-1162
  • Josa Garcia-Tornel, Alejandro|||0000-0003-1180-7910
  • Rieradevall, Joan|||0000-0003-3360-6829
Today, food security has a critical place in the government agendas of developing countries. In Latin American case, urban contexts have been subject to radical transformations in the last decades, most apparently through the expansion of social housing, which may limit or condition access to food for the neediest population. Nowadays, in Latin America, there are numerous cases of urban agriculture. Quito (Ecuador) stands out for the development of urban agriculture through the Participatory Urban Agriculture Project - AGRUPAR; initiative that has led to the implementation of orchards with organic production, raising of small animals, food processing and marketing of surpluses for food-nutrition security. Above all, it has transcended its urban and peri-urban intervention to rural areas, favoring the urban-rural connection. Also, worldwide the urban agriculture is developed in different forms, one of which is through crops protected by a greenhouse on the roofs: Rooftop greenhouse (RTG). This form of UA uses specific substrates for hydroponic crops and has modern irrigation systems often combined with rainwater harvesting and provides a unique opportunity to improve urban agriculture in Quito. The purpose of this study is to identify the implementation potential of rooftop greenhouses in social neighborhoods in Quito. Standard methods to assess the potential use of rooftop greenhouses were adapted to a social neighborhood. The guidelines follow three steps: Step 1: Characterization based on criteria; Step 2: Available surface determination and Step 3: Production, self-sufficiency and self-supply. "La Comuna Santa Clara de San Millán" was selected as study area. The results showed that 33.2% (7.70 ha) of the neighborhood rooftops had a short-term feasibility to install rooftop greenhouses, with the potential to produce 1,579,140 and 56,720 kg/year of tomato and lettuce respectively. The research has developed reliable guidelines that prove the feasibility to install rooftop greenhouses in similar large Latin-American cities area.
Dipòsit Digital de Documents de la UAB
Datos de investigación Set de datos (Dataset)

Consumption patterns in a housing estate, the municipality of Badia del Vallès, Hàbits de consum en un polígon d'habitatges, Hábitos de consumo en un polígono de viviendas

  • Toboso-Chavero, Susana|||0000-0001-8475-5184
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
  • Villalba, Gara|||0000-0001-6392-0902
  • Madrid, Cristina|||0000-0002-4969-028X
Knowing the consumption patterns of the residents related to the occupation of the buildings and the family structure to which they belong. This study is part of central research of the Autonomous University of Barcelona with the collaboration of the city council of Badia del Vallès, which studies the urban metabolism of the municipality, being the typical housing estate built in the 70s, and the potential scenarios to use the roofs of buildings to implement agriculture, solar panels or rainwater harvesting in these buildings, to benefit to the municipality environmentally, socially and economically in its urban regeneration. There is the first part of general data: sex, age, employment status, income, type of family unit and number of people in the family unit, and what type of housing they live. The second part is about the consumption patterns, including the expenses in basic needs, water, energy and the shopping basket, and a third part focused on the weekly consumption of different types of vegetables. We want to publish this open-access data so that it can be used by public bodies, the general public or researchers interested in consumption patterns., Conèixer els hàbits de consum dels residents relacionat amb l'ocupació dels edificis i el nucli familiar al qual pertanyen. Aquest estudi forma part d'un estudi central de la Universitat Autònoma de Barcelona amb la col.laboració de l'Ajuntament de Badia del Vallès, que estudia el metabolisme urbà de Badia del Vallès, signet el típic polígon d'hadbitages contruit als anys 70, i els escenaris potencials d'utilitzar les cobertes dels edificis per implementar agricultura, plaques solars o captació d'aigua de pluja en aquests edificis, amb l'objectiu de beneficiar al municipi ambientalment, socialment i econòmicament en la seva regeneració urbana. Hi ha una primera part de dades generals: sexe, edat, estat laboral, ingressos, tipus de nucli familiar i nombre de persones a la unitat familiar, i en quin tipus d'habitatge viuen. Una segona part d'hàbits de consum on es va preguntar les despeses en necessitats bàsiques, aigua, energia i cistella de la compra, i una tercera part centrada en el consum setmanal de diferents tipus de verdures. Es vol publicar aquestes dades en obert perquè puguin ser utilitzades per organismes públics, públic en general o investigadors interessats en hàbits de consum., Conocer los hábitos de consumo de los residentes relacionado con la ocupación de los edificios y el núcleo familiar al que pertenecen. Este estudio forma parte de un estudio central de la Universidad Autónoma de Barcelona con la colaboración del Ayuntamiento de Badia del Vallès, que estudia el metabolismo urbano de Badia del Vallès, siendo el típico polígono de viviendas construido en los años 70,y los escenarios potenciales de utilizar las cubiertas de los edificios para implementar agricultura, placas solares o captación de agua de lluvia en estos edificios, con el objetivo de beneficiar al municipio ambiental, social y económicamente en su regeneración urbana. Hay una primera parte de datos generales: sexo, edad, estado laboral, ingresos, tipo de núcleo familiar y número de personas en la unidad familiar, y en qué tipo de vivienda viven. Una segunda parte de hábitos de consumo donde se preguntó los gastos en necesidades básicas, agua, energía y cesta de la compra, y una tercera parte centrada en el consumo semanal de diferentes tipos de verduras. Se quiere publicar estos datos en abierto para que puedan ser utilizadas por organismos públicos, público en general o investigadores interesados en hábitos de consumo.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Closed-loop crop cascade to optimize nutrient flows and grow low-impact vegetables in cities

  • Rufí Salís, Martí|||0000-0003-3696-1033
  • Parada, Felipe|||0000-0003-2845-236X
  • Arcas Pilz, Verónica|||0000-0002-6854-3138
  • Petit-Boix, Anna|||0000-0003-2048-2708
  • Villalba, Gara|||0000-0001-6392-0902
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
Urban agriculture systems can significantly contribute towards mitigating the impacts of inefficient and complex food supply chains and increase urban food sovereignty. Moreover, improving these urban agriculture systems in terms of nutrient management can lead to a better environmental performance. Based on a rooftop greenhouse in the Barcelona region, we propose a cascade system where the leachates of a tomato cycle from January to July (donor crop) are used as the main irrigation source for five successive lettuce cycles (receiving crop). By determining the agronomic performance and the nutrient metabolism of the system, we aimed to define the potential of these systems to avoid nutrient depletion and mitigate eutrophication, while scaling the system in terms of nutrient supply between the donor and the receiving crops. The results showed that low yields (below 130 g per lettuce plant) are obtained if a cascade system is used during the early stage of the donor crop, as the amount of nutrients in donor's leachates, specially N (62.4 mg irrigated per plant in the first cycle), was not enough to feed the lettuce receiving crop. This effect was also observed in the nutrient content of the lettuce, which increased with every test until equaling the control (4.4% of N content) as the leachates got richer, although too high electrical conductivity values (near 3 dS/m) were reached at the end of the donor crop cycle. Findings on the uptake of the residual nutrient flows showed how the cascade system was able to take advantage of the nutrients to produce local lettuce while mitigating the effect of N and P in the freshwater and marine environments. Considering our case study, we finally quantified the scale between the donor and receiving crops and proposed three major ideas to optimize the nutrient flows while maintaining the yield and quality of the vegetables produced in the receiving crop.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

More than the sum of the parts: system analysis of the usability of roofs in housing estates

  • Toboso-Chavero, Susana|||0000-0001-8475-5184
  • Villalba, Gara|||0000-0001-6392-0902
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
  • Madrid, Cristina|||0000-0002-4969-028X
Housing estates, that is, mass social housing on middle- and high-rise apartment blocks, in urban areas are found all over the world with very similar constructive patterns and a multiplicity of environmental and socio-economic problems. In this regard, such areas are optimal for the implementation of a roof mosaic which involves applying a combination of urban farming, solar energy, and harvesting rainwater systems (decentralized systems) on unoccupied roofs. To design sustainable and productive roof mosaic scenarios, we develop an integrated framework through a multi-scale (municipality, building, and household) and multi-dimensional analysis (environmental and socio-economic, structural, and functional) to optimize the supply of essential resources (food, energy, and water). The proposed workflow was applied to a housing estate to rehabilitate unused rooftops (66,433 m2). First, using the Multi-Scale Integrated Analysis of Societal and Ecosystem Metabolism methodology, we determined metabolic rates across buildings and municipality levels, which did not vary significantly (12.60-14.50 g/h for vegetables, 0.82-1.11 MJ/h for electricity, 0.80-1.11 MJ/h for heating, and 5.62-6.59 L/h for water). Second, based on a participatory process involving stakeholders to qualitatively analyze potential scenarios further in terms of preferences, five scenarios were chosen. These rooftop scenarios were found to improve the resource self-sufficiency of housing estate residents by providing 42-53% of their vegetable consumption, 9-35% of their electricity use, and 38-200% of their water needs depending on the scenario. Boosting new urban spaces of resource production involves citizens in sites which face social and economic needs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Identifying potential applications for residual biomass from urban agriculture through eco-ideation, tomato stems from rooftop greenhouses

  • Manríquez-Altamirano, Ana
  • Sierra-Pérez, Jorge|||0000-0002-7660-3508
  • Muñoz Odina, Pere|||0000-0002-2931-6311
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
Considering that urban agriculture (UA) is currently on the rise due to its multiple benefits in addition to environmental ones, it would also be necessary to foresee the flow of solid waste it generates, which if not properly managed or used, could become a new waste problem within the cities. The main objective of this study is to take advantage of agro-urban solid waste (AUSW) from the perspective of Circular economy (CE) in order to, in addition to reducing the volume of AUSW within cities, to close the life cycle of UA allowing to continue with its multiple benefits. Starting from a previous study on the classification and quantification of the AUSW generated in rooftop greenhouse (RTG) tomato crop, where it was determined that the waste with the greatest potential for use was tomato stems, in this study a methodology is proposed that part of the eco-design to take advantage of the tomato stems adding value (upcycling) through the approach of "do-it-yourself" (DIY) for local use. First, the physical, chemical and mechanical characterization of the tomato stems was carried out and the materials with similar properties were identified using Ashby graphs., Afterwards, a creative session was held where specialists in order to identify possible applications of the stems through group techniques for the generation of ideas and the evaluation of concepts. Finally, tests were carried out with the material and a semi-quantitative evaluation of the resulting concepts was carried out using an eco-design metric. The resulting concepts were "Fences and trellises", "Packaging" and "Boards, panels and blocks". In addition to the results obtained on the possible applications of the stems in situ, this study provides data on the characterization of the stems of tomato plants that could also be used for the use of biomass in other contexts and scales such as conventional agriculture.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Analysis of urban agriculture solid waste in the frame of circular economy, case study of tomato crop in integrated rooftop greenhouse

  • Manríquez-Altamirano, Ana
  • Sierra-Pérez, Jorge|||0000-0002-7660-3508
  • Muñoz Odina, Pere|||0000-0002-2931-6311
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
Within urban agriculture (UA), integrated rooftop greenhouses (i-RTG) have great growth potential as they offer multiple benefits. Currently it is intended to improve environmental benefits by taking advantage of the water, nutrients and gases flows. On the other hand, solid waste (SW) generated by the UA is a new type of waste within cities that has not well been classified or quantified for its use. This could become a new problem for the waste management system within cities in the future, mainly the organic fraction. The objective of this research is to identify what type of i-RTG SW has the potential to be used from a circular economy (CE) perspective and propose a type of management for its material valorization. The results of the case study show that, of the SW generated in i-RTG, the biomass has the greatest potential to be used locally as an eco-material, particularly the tomato stems. Its use is proposed as a substrate for two experimental lettuce crops in i-RTG. The results show that tomato stems have a better yield as a substrate after a prewash treatment, since at first the values of electrical conductivity (EC) are very high with respect to the control substrate, which is expanded perlite. In conclusion, we can say that it is possible to increase the environmental benefits of i-RTG by taking advantage of its biomass locally, helping to foresee a possible future problem regarding the management of the residual biomass of i-RTG within cities. In this way, the paradigm about the perception of the SW of the UA could be changed to give them a by-product treatment from the beginning.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Comparison of organic substrates in urban rooftop agriculture, towards improving crop production resilience to water stress in Mediterranean cities

  • Parada, Felipe|||0000-0003-2845-236X
  • Ercilla Montserrat, Mireia|||0000-0002-6632-7829
  • Arcas Pilz, Verónica|||0000-0002-6854-3138
  • López Capel, Elisa|||0000-0002-0637-4308
  • Carazo, Núria
  • Montero Camacho, Juan Ignacio|||0000-0003-2548-4665
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
  • Villalba, Gara|||0000-0001-6392-0902
  • Rieradevall, Joan|||0000-0003-3360-6829
  • Muñoz Odina, Pere|||0000-0002-2931-6311
BACKGROUND: Urban agriculture contributes to meet food production demand in cities. In a context of low water availability, it is important to consider alternatives that are able to maintain production. This study aimed to assess the use of substrates made from local materials and high water retention capacity as an alternative for urban agriculture in periods with water stress. Different substrates were used for 3 consecutive crop cycles of lettuce (Lactuca sativa L.) during the spring and summer periods of 2018 to observe these substrates performance during warmer periods of the year in an integrated rooftop greenhouse near Barcelona. The substrates used were coir commercial organic substrate, vegetable Compost from urban organic waste, Perlite (as control) commercial standard substrate, and a Mixture of the urban Compost and Perlite (1:1). Substrate crop performance was assessed under conventionally irrigation (0-5 cbar) and water restricted conditions (irrigation stop until the water tension inside the perlite bags reached -20 cbar). RESULTS: The results demonstrate that the Compost and Mix yields were similar to those obtained from Perlite (11.5% y 3.7% of more production in a restricted water condition average values). Compared to the Perlite, the organic substrates increased the crops resilience to water restriction, through biomass accumulation comparison, it took longer for Coir to lose water (1 and 2 test); however, when dryness began, it occurred very quickly. CONCLUSION: The vegetable Compost and the substrate Mixture presented tolerance to water restriction when water restriction reached -20 cbar.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Incorporating user preferences in rooftop food-energy-water production through integrated sustainability assessment

  • Toboso-Chavero, Susana|||0000-0001-8475-5184
  • Madrid, Cristina|||0000-0002-4969-028X
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
  • Villalba, Gara|||0000-0001-6392-0902
With the overall aim to design successful implementation strategies of food-energy-water production systems on urban roofs, we propose an integrated process that includes participatory processes and a multi-dimensional sustainability assessment of environmental, social and economic indicators. The proposed framework was applied to a typical housing estate in the Metropolitan Area of Barcelona made up of 201 buildings and 13,466 inhabitants and characterized by a high share of low-income families. We assess several future scenarios of joint electricity production (photovoltaic panels), vegetable production (through open-air farming and greenhouses), green roof implementation and rainwater harvesting and rank them according to non-participatory and participatory approaches. In general, there was a tendency for residents to choose strategies providing energy and water rather than the food production potential of rooftops. However, the environmental assessment indicated that the least impacting alternatives from a life cycle approach were those promoting vegetable production, meeting 42 to 56% of the residents' fresh produce demand and reducing environmental impacts by 24 to 37 kg CO 2eq m -2 of rooftop/year. Hence, we found that residents were mainly concerned with energy expenses and not so much with food insecurity, social cohesion or the impacts of long-distance supply chains. Our assessment supports urban sustainability and helps identify and breach the gap between scientific and user preferences in urban environmental proposals by informing and educating residents through a participatory integrated assessment.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Assessing the environmental behavior of alternative fertigation methods in soilless systems, the case of Phaseolus vulgaris with Struvite and Rhizobia inoculation

  • Arcas Pilz, Verónica|||0000-0002-6854-3138
  • Rufí Salís, Martí|||0000-0003-3696-1033
  • Parada, Felipe|||0000-0003-2845-236X
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
  • Villalba, Gara|||0000-0001-6392-0902
Urban agriculture, while being a promising solution to increase food sovereignty in cities, can lead to an unprecedented discharge of nutrient and fertilizer-related emissions into the urban environment. Especially relevant are nitrogen (N) and phosphorus (P), due to their contribution to marine and freshwater eutrophication. Therefore, alternative methods of fertilization need to be put into practice to avoid such impacts to the surrounding environment. Struvite, has been studied as a potential slow releasing fertilizer due to its high P content, while the bacteria rhizobium has been used to fix N directly from the atmosphere. Legumes, like the common bean are N-demanding crops capable of symbiosis with the bacteria rhizobium and have previously shown positive responses to fertilization with struvite. This study aims to analyze the performance of plant production in hydroponic systems combining rhizobium inoculation and struvite (2g, 5g, 10g, 20g) irrigated with a N and P deficient nutrient solution, as well as a life cycle analysis (LCA) to determine the possible impacts. The nutrient content of in- and out-going irrigation was analyzed as well as in plants and beans. The functional unit for the LCA was 1kg of fresh beans. The results obtained indicate a yield reduction of 60% to 50% in comparison to the control which was irrigated with a full nutrient solution. The impacts from operational stage are less in all impact categories, where most significant reductions up to 69% and 59% are seen in marine-eutrophication and global warming respectively. Although the infrastructure does not change between treatments, its impacts increase due to lower yields. We determine that below a 10% of conventional yield, the alternative systems have more impact than the use of conventional mineral fertilizers in almost all impact categories, thus pointing to the importance of infrastructure to truly reduce environmental impacts for urban agriculture.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Improving the fertigation of soilless urban vertical agriculture through the combination of struvite and rhizobia inoculation in Phaseolus vulgaris

  • Arcas Pilz, Verónica|||0000-0002-6854-3138
  • Parada, Felipe|||0000-0003-2845-236X
  • Villalba, Gara|||0000-0001-6392-0902
  • Rufí Salís, Martí|||0000-0003-3696-1033
  • Rosell Melé, Antoni|||0000-0002-5513-2647
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
Soilless crop production is a viable way to promote vertical agriculture in urban areas, but relies intensively on the use of mineral fertilizer. Thus, the benefits of fresher, local food and of avoided transportation and packaging associated to reduced food imports could be counteracted by an increase in nutrient-rich wastewater, contributing to freshwater and marine eutrophication. The present study aimed to explore the use of mineral fertilizer substitutes in soilless agriculture. Phaseolus vulgaris (common bean) was fertilized with the combination of slow-releasing fertilizer struvite (a source of N, P, and Mg) that is a by-product of wastewater treatment plants and inoculated with Rhizobium (a N2-fixing soil bacteria). The experiment included three bean production lines: A) 2g/plant of struvite and rhizobium inoculation, B) 5g/plant of struvite and rhizobium inoculation, both irrigated with a Mg, P and N- free nutrient solution, and C) control treatment irrigated with a full nutrient solution and no inoculation. Plant growth, development, yield and nutrient content were determined at 35, 62 and 84 days after transplanting, as well as the biological N2 fixation using the 15N natural abundance method. Treatments A and B resulted in lower total yields per plant than the control C (59.35± 26.4ga plant-1 for A, 74.2±23.0ga plant-1 for B and 147.71± 45.3gb plant-1 for C). For A and B, nodulation and N2 fixation capacity seamed to increase with the initially available struvite, but overtime reached deficient levels of Mg and close to deficient levels of P which could explain the lower yields. Nevertheless, we conclude that the combination of struvite and the N2-fixing bacteria covered N needs of the plant throughout the growth cycle. However, further studies are needed to determine optimal struvite quantities for vertical agriculture systems that can meet P and Mg requirements throughout the lifetime of the plant.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Recovered phosphorus for a more resilient urban agriculture, assessment of the fertilizer potential of struvite in hydroponics

  • Arcas Pilz, Verónica|||0000-0002-6854-3138
  • Rufí Salís, Martí|||0000-0003-3696-1033
  • Parada, Felipe|||0000-0003-2845-236X
  • Petit-Boix, Anna|||0000-0003-2048-2708
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
  • Villalba, Gara|||0000-0001-6392-0902
Urban agriculture (UA) is a means for cities to become more resilient in terms of food sovereignty while shortening the distance between production and consumption. However, intensive soilless UA still depends on the use of fertilizers, which relies on depleting non-renewable resources such as phosphorous (P) and causes both local and global impact for its production and application. With the aim to reduce such impacts and encourage a more efficient use of nutrients, this study assesses the feasibility of using struvite precipitated from an urban wastewater treatment plant as the unique source of P fertilizer. To do so, we apply various quantities of struvite (ranging from 1 to 20 g/plant) to the substrate of a hydroponic Phaseolus vulgaris crop and determine the yield, water flows and P balances. The results show that treatments with more than 5g of struvite per plant produced a higher yield (maximum of 181.41 g/plant) than the control (134.6 g/plant) with mineral fertilizer (KPO4H2). On the other hand, P concentration in all plant organs was always lower when using struvite than when using chemical fertilizer. Finally, the fact that different amounts of struvite remained undissolved in all treatments denotes the importance to balance between a correct P supply to the plant and a decrease of P lost through the leachates, based on the amount of struvite and the irrigated water. The findings of this study show that it is feasible for UA to efficiently use locally recovered nutrients such as P to produce local food.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Assessment of the food-water-energy nexus suitability of rooftops. A methodological remote sensing approach in an urban Mediterranean area

  • Zambrano Prado, Perla|||0000-0001-5911-3585
  • Muñoz Liesa, Joan|||0000-0001-8442-6399
  • Josa Garcia-Tornel, Alejandro|||0000-0003-1180-7910
  • Rieradevall, Joan|||0000-0003-3360-6829
  • Alamús Esteban, Ramón|||0000-0003-0292-5640
  • Gasso-Domingo, Santiago
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
This work established a framework to identify and analyze the technical feasibility of roofs for integrating urban agriculture, rainwater harvesting, and photovoltaic systems using various remote sensing. The framework was applied to a region north of Barcelona. Three levels of solar access requirements for tomatoes, leafy crops, strawberries, and microgreens were established. The case study included compact and disperse urban forms, residential and nonresidential building uses and various building typologies. It was identified that 8% of the roof area is feasible for tomato and lettuce production, and production could satisfy the 210% of average intake of tomatoes and the 21% average yearly consumption of lettuce. Rainwater harvesting systems could supply 94.26% of the water requirements for lettuce growing in an open-air system; in contrast, 53% of irrigation could be satisfied for tomato production in rooftop greenhouse systems. The results showed a potential for 80% of roof area to be used for rainwater harvesting systems, representing the average yearly water consumption of 44% of citizens for laundry, showering, toilet flushing, cleaning and irrigation uses. Finally, 50% of the roofs are suitable for photovoltaic panels, representing an average energy consumption of 18% of citizens.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Life cycle cost analysis of tomato production in innovative urban agriculture systems

  • Peña, Alexandra|||0000-0001-6774-5718
  • Rovira Val, Mª Rosa|||0000-0003-0408-6270
  • Mendoza, Joan Manuel F.
The construction of innovative urban agriculture systems in cities has increased due to food and environmental concerns. While the environmental performance of urban agriculture has been extensively studied, research on the life cycle costs of urban agriculture systems is still limited, which constraints sustainability-oriented decision-making processes. This paper analyses the economic viability of tomato production cycle in an innovative building with an integrated urban agriculture system in rooftop by applying the life cycle cost methodology. The data was collected from direct measurements and internal and external sources. To calculate labour costs, a customised data collection sheet was created. The results are presented by life cycle stage, cost category and type of cost (fixed & variable). Results indicate that the main cost drivers for tomato production are labour (24.7%), the rooftop greenhouse structure (15%), external pest control (12.6%), and rainwater consumption (9.5%), accounting altogether for 61.8% of the total costs. Accordingly, cost reduction solutions are evaluated through the development of sensitivity scenarios (rooftop greenhouse structure design, tap water use and rainwater tank size), including the consideration of another relevant aspect, such as the role of the production level output, as it can greatly influence the economic viability and profitability. Finally, the main environmental and social aspects of these urban production systems are also included.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Supplemental LED lighting improves fruit growth and yield of tomato grown under the sub-optimal lighting condition of a building integrated rooftop greenhouse (i-RTG)

  • Appolloni, Elisa|||0000-0001-9561-1557
  • Paucek, Ivan|||0000-0002-9211-4376
  • Pennisi, Giuseppina|||0000-0001-9377-4811
  • Stringari, Gaia|||0000-0003-3834-4506
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
  • Orsini, Francesco|||0000-0001-6956-7054
  • Prosdocimi Gianquinto, Giorgio|||0000-0002-6548-5526
The metabolism of a building can be connected to a rooftop greenhouse, exchanging energy, water and CO2 flows, therefore reducing emissions and recycling cultivation inputs. However, integrating a rooftop greenhouse onto a building requires the application of stringent safety codes (e.g., fire, seismic codes), to strengthen and secure the structure with safety elements such as thick steel pillars or fireproof covering materials. These elements can shade the vegetation or reduce solar radiation entering the rooftop greenhouse. Nevertheless, application of additional LED light can help to overcome this constraint. The present study evaluated supplemental LED light application in an integrated rooftop greenhouse (i-RTG) at the ICTA-UAB research institute, located in Barcelona (Spain), for tomato cultivation (Solanum lycopersicum cv. Siranzo). The experiment explored the effects of three LED lighting treatments and a control cultivated under natural light only (CK). Applied treatments, added to natural sunlight, were: red and blue (RB), red and blue + far-red (FR) for the whole day, and red and blue + far-red at the end-of-day (EOD), each for 16 h d-1 (8 a.m.-12 a.m.) with an intensity of 170 µmol m-2 s-1. The results indicate that LED light increased the overall yield by 17% compared with CK plants. In particular, CK tomatoes were 9.3% lighter and 7.2% fewer as compared with tomatoes grown under LED treatments. Fruit ripening was also affected, with an increase of 35% red proximal fruit in LED-treated plants. In conclusion, LED light seems to positively affect the development and growth of tomatoes in building integrated agriculture in the Mediterranean area.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Influence of social housing models in the development of urban agriculture in Mexico

  • Nadal, Ana|||0000-0002-9919-5092
  • Rodríguez-Labajos, Beatriz|||0000-0002-0559-910X
  • Cuerva, Eva|||0000-0003-2016-1162
  • Josa Garcia-Tornel, Alejandro|||0000-0003-1180-7910
  • Rieradevall, Joan|||0000-0003-3360-6829
This study examines urbanization patterns linked to social housing units and the way in which such patterns influence the practice of urban agriculture (UA) in Mexico. Due to the transformations that take place over time in Mexican social-housing units, impervious surfaces tend to increase at the expense of greenspace and UA possibilities. The research aims to identify the negative impact of social housing transformations on UA and suggest a policy framework for sustainable housing development in Mexico. The empirical analysis distinguishes four social housing typologies within two emblematic neighborhoods in the city of Merida, Mexico: Las Magnolias and Ampliación Tixcacal-Opichén. A survey of 157 housing units combines quantitative metrics and qualitative descriptors to unveil the detrimental impact of development on UA. The results show that UA takes place within the building lots and around the housing units, rather than in public urban areas. 60% of the sampled units practiced UA, with traditional backyard gardens being the most common modality. The research findings point to a systematic expansion of impervious surfaces, limitation of both cultivation choices and crop variety, and major restrictions on UA practices. Social housing represents the bulk of residential developments in Mexico (42.7% out of 35.5 million housing units). Left unregulated, the types of social housing transformations that have been empirically verified in this study endanger the availability of green space as the primary resource for UA. This research sheds light on critical policy changes and formulations that are required to enhance UA practices and to establish greener cities and more sustainable housing development.